I just paired a Sony bluetooth headset (HBH-IS800) with my Tilt 2 and the volume is quite loud when listening to music. I put media player sound volume down to 5%, apparently the lowest, and it's still very loud. The only other option at that point is going down to 0%, obviously too quiet :-|
Also, the main system volume slider on the side - no effect on the headset whatsoever. Whether it's maxed out or silent - the bluetooth headset is still too loud.
Does anyone have any recommendations on:
1) How to go between <5% and >0% volume on media player?
2) How to get the main volume control to affect the bluetooth headset volume?
3) Any other ideas on lowering the music volume overall? Maybe another (better?) music player could work? Maybe a reg setting I can modify?
Any advice is appreciated - the headset is so cool - I'd love to make it usable!!! - TIA!
-Fnortner
P.S. - I called Sony - their answer: "We don't support the headset unless it's paired with a Sony phone". Boo Sony!
I have the same problem with this headset.
I had it running on the Touch HD with volume control from the device works perfectly.
Is there any solution yet?
same volume control issue with BT8040
With both Media Player or PocketTunes, I am not able to alter the volume on the BT8040, either from the Tilt2, or the earpiece itself.
Never had this problem with the same earpiece and my original Tilt.
Same problem here
I have the same problem. I have a bluetooth set which I connect to FM transmiter. The problem is: Volume is all the way up so the music is horrible, it gets distorted. I'd like to know how to manage the bluetooth volume in the system settings, is there a way? Pushing the left buttons (system volume) wont affect bluetooth volume, neither any other volume control within the settings. Any help appreciated.
I have found a solution that works for me. I use Nitrogen Player and you can just turn the equalizer on and change the preamp level to close to the bottom. Works a treat for me.
Code:
Options -> Settings -> Equalizer.
http://code.google.com/p/microfi-nitrogen/
I have a bluetooth stereo headset and when I pair it it tells me that I can not control the volume from the phone.. any way to fix??
dahauss said:
I have a bluetooth stereo headset and when I pair it it tells me that I can not control the volume from the phone.. any way to fix??
Click to expand...
Click to collapse
Same problem to me... I listen often to internet radio, but now it's too loud :-(
Same Problem here...
If anyone came up with a solution for this that works native to the ROM (vs just adjusting the eq) post it here, and I'll do the same.
jon5kr said:
If anyone came up with a solution for this that works native to the ROM (vs just adjusting the eq) post it here, and I'll do the same.
Click to expand...
Click to collapse
I have a stereo BT headset, and whenever I pair it with my (tmo US) TP2, the phone throws up a standard "you have to adjust the volume from the headset, can't do it from the handset" warning...and when I do use the volume controls on the headset, the volume does adjust accordingly, but without any feedback from the phone (no volume slider or other indication), so the adjustment is obviously happening in the headset's circuitry, and the audio coming from the phone is at a static, un-adjustable level.
From the research I've done, the culprit is the sub-par Widcomm bluetooth stack in the phone, and I haven't yet found anyone who has engineered a replacement stack. I know the possibility exists (I upgraded the bluetooth stack on my Wizard a couple of years ago to get one that had the A2DP profile), but I just don't think anybody has made a replacement for this model yet
sirphunkee said:
I have a stereo BT headset, and whenever I pair it with my (tmo US) TP2, the phone throws up a standard "you have to adjust the volume from the headset, can't do it from the handset" warning...and when I do use the volume controls on the headset, the volume does adjust accordingly, but without any feedback from the phone (no volume slider or other indication), so the adjustment is obviously happening in the headset's circuitry, and the audio coming from the phone is at a static, un-adjustable level.
Click to expand...
Click to collapse
Thanks for the reply! My situation is backwards in the sense that the headset doesn't have volume controls - and what I seem to be finding is that there doesn't seem to be an immediate fix for controlling a headset from the phone. I did use a tool called "Advanced Config" to find a default music volume that I can change, so I lowered that from 100 to 50 and now the volume is at least comfortable. However I have no control over it yet....
Could these issues be due to USB 2.0 versus USB 2.1 ?
I got a Motorola H17 (USB 2.1) and everything works perfect. Have volumn control from phone and headset and all audio sources work fine.
Oooops. Meant Bluetooth 2.0 vs Bluetooth 2.1.
jon5kr said:
Thanks for the reply! My situation is backwards in the sense that the headset doesn't have volume controls - and what I seem to be finding is that there doesn't seem to be an immediate fix for controlling a headset from the phone. I did use a tool called "Advanced Config" to find a default music volume that I can change, so I lowered that from 100 to 50 and now the volume is at least comfortable. However I have no control over it yet....
Click to expand...
Click to collapse
Yes, for some reason, the BT stack in this phone seems to assume that all BT stereo headsets also have built-in controls on them and won't allow them to adjust system volume. I think we're probably stuck with that fact until somebody finds a BT stack to replace the TP2's native one.
The best workaround for now may be just to find and use a headset that does have volume controls. I'll be posting a review soon of the ones I have now, the Plantronics/Altec Lansing Backbeat 903's
jonto said:
Could these issues be due to USB 2.0 versus USB 2.1 ?
I got a Motorola H17 (USB 2.1) and everything works perfect. Have volumn control from phone and headset and all audio sources work fine.
Click to expand...
Click to collapse
So when you play music through it, you can control the volume on the handset itself, and with controls on the headset? If so, I'm guessing it's because that's a monaural (not stereo) headset, so it may not be the same volume. My headset has BT 2.1 on it, and while I can control the playback etc on the phone, the volume controls only adjust the headset volume, not the volume on the phone.
sirphunkee said:
So when you play music through it, you can control the volume on the handset itself, and with controls on the headset? If so, I'm guessing it's because that's a monaural (not stereo) headset, so it may not be the same volume. My headset has BT 2.1 on it, and while I can control the playback etc on the phone, the volume controls only adjust the headset volume, not the volume on the phone.
Click to expand...
Click to collapse
This may be true since it is only monaural. The volume control (on the phone) still controls the phone (thus the headset) while the BT control only controls the BT headset.
jonto said:
This may be true since it is only monaural. The volume control (on the phone) still controls the phone (thus the headset) while the BT control only controls the BT headset.
Click to expand...
Click to collapse
Good evening,
If it can help you with tcpmp-0. 72RC1 - GF5500Edition - Alpha4. 1 can adjust the volume of this famous helmet HBH-IS800 and it is easier than with nitrogene.
Good evening
Ichtus
if its is supported by only sony phones(BB storm too) then can we get the profile from a xperia and install it on another device
I have seen multiple people state they can adjust the volume both on their headset and on the handset asystem volume. I thought perhaps it was the BT stack EXCEPT I was able to do this as well before I did a hard reset now I cannot adjust the 2 volume controls independently. The handset volume is static. Will someone that can adjust the system volume with a headset compare settings/egistry entries with me?
Is there a way we can adjust the volume of the line out from the bluetooth connection, anyone, lately ive have noticed that most devices are doing this, dont want to revert to a old stack but there has to be a way to combine the headset volume with the bluetooth volume
Hi. I have tried many different rom's and Kernel's on my gnexus. I have been able to adjust the headset volume, and speaker volume with different rom's (curently using Foxhound), but have never found a way to increase the bluetooth a2dp out volume. I have a bluetooth reciever on my amp at home, used to play music from my Nexus S with great volume (still does) but I have never been able to with Gnexus. Gnexus plays but with the amp all the way up it is still not loud at all. When I plug direct conection to Gnexus using rca's and the headphone jack it works fine. Has anyone had any success in this area and would be willing to share the experience?
Thanks.................
I just recently Got my Note 2 a few days ago. The only complaint i really have is the volume control when using the headphone jack, I never use headphones, but i do use the jack to play music through my car stereo. When i unplug it and plug it in the volume drops to half (probably for hearing safety). Is there a way to override or disable this?
Try volume control+ from play store. I didnt test it on note2 but worked great on tmobile g2
Sent from my SGH-T889 using xda app-developers app
I use Tasker to set my volume levels when I plug my headphones or my car aux cable in. It shows the hearing damage warning, but it sets the volume right where I want it.
Thanks Guys I will look into them. Much appreciated.
ProximaC said:
I use Tasker to set my volume levels when I plug my headphones or my car aux cable in. It shows the hearing damage warning, but it sets the volume right where I want it.
Click to expand...
Click to collapse
Can you post how you set the values maybe a screen shot? I can't seem figure out exactly what to set.
Car Audio profile using Headset Plugged state with No Mic option. (that's how it knows the difference between my headphones, and my car's auxiliary cord)
That enables Car Mode which sets the current Media Volume to a variable, then sets the Media Volume to 15.
Exit task sets it back to the value in the variable, which is what it was before I plugged in the Aux cable.
Hey guys,
I like connecting my phone to my car's bluetooth. I have found a way to remove the "high volume" warning message so that the media volume output from my phone can be at maximum volume. However, every time my phone connects to my car's bluetooth, the volume defaults to being around 70% and not being at the max level. I would like to find a way to have bluetooth media output volume always be maxed out. Is there some way to do it maybe through adb or something like that?
Thank you
I have noticed that when either connected to Bluetooth headphones or streaming to my car stereo that I am having to turn the volume up to nearly 90% just to get a reasonable volume.
Any work around for this ?
hpsauce37 said:
I have noticed that when either connected to Bluetooth headphones or streaming to my car stereo that I am having to turn the volume up to nearly 90% just to get a reasonable volume.
Any work around for this ?
Click to expand...
Click to collapse
Yea I have a pair of wireless beatsx, but those headphones are junk anyway. Can not get them "loud". Maybe its the phone/bluetooth..
I noticed the same thing when I first paired the 7t with my car's BT. I don't consider it a problem because all I had to do was raise the volume on the car radio, and it remembered the setting. But I'm only listening to navigation prompts and voice phone calls. I haven't tried it with music.
Anyone solved this problem?
While using headphones or any audio-bt devices connected to oneplus 7t i can get only around 70-80% of max device volume.
My bluetooth can get painfully loud on any system... Are you sure you are not facing to sets of volume controls?
Some "dumb" headphones / speakers just have one output volume and you control loudness via the phone volume. Others have their own volume processing (like a car stereo). If you max out your phone volume then you can control the loudness via the stereo.
Numerous times I've been in the car and can't figure out why I need to turn the stereo volume up so high only to realize I've bumped the phone volume to a low setting.