[SOLVED] In dire need of help! (bricked phone) - ZenFone 2 Q&A, Help & Troubleshooting

Hello!
I'm a newb when it comes to rooting phones and such, and I have made a huge mistake. I rooted my phone to remove the ridiculous amount of bloatware that ASUS put on the phone. I saw that I could get an OTA update, so I installed it, and it bricked my phone. I did not know that you are NOT supposed to do that while rooted. So yeah, perhaps I should've looked more into rooting so I wouldn't do something stupid. Now, my phone gets stuck on the ASUS and Android bootup screen, so I have to flash a stock rom.
So, I tried using "Guide to apply OTA without bootloop in Rooted ZF2", but it does not work for me. Whenever I tried to type in the commands, it said "permission denied." When I type in "adb devices," my phone does not show up. However, when I type "fastboot devices," it does appear. Does it have something to do with my drivers? In the device manager, I have two things under ASUS Android Device, ASUS Android Bootloader Interface and ASUS Android ADB Interface (which I tried to install with the "Add Legacy Hardware" button under Action in the device manager).
http://forum.xda-developers.com/zenfone2/general/guide-to-apply-ota-bootloop-rooted-zf2-t3127835
I really don't know how to fix it now, so help would be GREATLY appreciated!
Thanks

This is a complete thread on flashing from boot loader
http://www.chinaphonearena.com/foru...e-CN-to-WW-flash-tutorial?highlight=zenfone+2
Just follow the instructions and .59 is now loaded there do you update to latest, just to reiterate I believe you will have to reset data to bring back reading the SIM card.
Sent from my ASUS_Z00AD using Tapatalk

jimchee said:
This is a complete thread on flashing from boot loader
Just follow the instructions and .59 is now loaded there do you update to latest, just to reiterate I believe you will have to reset data to bring back reading the SIM card.
Sent from my ASUS_Z00AD using Tapatalk
Click to expand...
Click to collapse
When I do this it still says "FAILED (remote: Permission denied)." What am I doing wrong? Also, the 4th step of the guide is confusing me. Which one is flashtools.zip and where can I get the adb drivers?

Go step by step through the guide downloading each thing necessary, step 4 download classrooms zip as pointed out and extract them to the folder your downloaded files are located in, at the same place where you downloaded classrooms you also have the and drivers, follow instructions and install them, if you follow the guide it is easy to do but read it through 1st, if you don't understand it then search on the web there are literally thousands of guides that you can find to help you understand, though everything is there on the thread I posted for you.
Sent from my ASUS_Z00AD using Tapatalk
---------- Post added at 03:39 PM ---------- Previous post was at 03:39 PM ----------
Weeset said:
When I do this it still says "FAILED (remote: Permission denied)." What am I doing wrong? Also, the 4th step of the guide is confusing me. Which one is flashtools.zip and where can I get the adb drivers?
Click to expand...
Click to collapse
Then you are not following the guide correctly
Sent from my ASUS_Z00AD using Tapatalk
---------- Post added at 03:43 PM ---------- Previous post was at 03:39 PM ----------
Turn off the phone, then follow instructions to boot to bootloader, make sure its recognized by typing (fastboot devices) and then enter, it should show a device then say fastboot behind it, if do your ready to flash, you must also extract the system zip do it builds the correct system file, just right click and extract here
Sent from my ASUS_Z00AD using Tapatalk

jimchee said:
Go step by step through the guide downloading each thing necessary, step 4 download classrooms zip as pointed out and extract them to the folder your downloaded files are located in, at the same place where you downloaded classrooms you also have the and drivers, follow instructions and install them, if you follow the guide it is easy to do but read it through 1st, if you don't understand it then search on the web there are literally thousands of guides that you can find to help you understand, though everything is there on the thread I posted for you.
Sent from my ASUS_Z00AD using Tapatalk
---------- Post added at 03:39 PM ---------- Previous post was at 03:39 PM ----------
Then you are not following the guide correctly
Sent from my ASUS_Z00AD using Tapatalk
---------- Post added at 03:43 PM ---------- Previous post was at 03:39 PM ----------
Turn off the phone, then follow instructions to boot to bootloader, make sure its recognized by typing (fastboot devices) and then enter, it should show a device then say fastboot behind it, if do your ready to flash, you must also extract the system zip do it builds the correct system file, just right click and extract here
Sent from my ASUS_Z00AD using Tapatalk
Click to expand...
Click to collapse
This is what shows up in the cmd window when I try doing it:
C:\Users\Weeset\Desktop\zenfone2rom>fastboot devices
F5AZFG10C556 fastboot
C:\Users\Weeset\Desktop\zenfone2rom>fastboot flash recovery recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (11838 KB)...
OKAY [ 0.578s]
writing 'recovery'...
FAILED (remote: Permission denied
)
finished. total time: 0.719s
C:\Users\Weeset\Desktop\zenfone2rom>fastboot flash boot boot.img
target reported max download size of 536870912 bytes
sending 'boot' (11826 KB)...
OKAY [ 0.562s]
writing 'boot'...
FAILED (remote: Permission denied
)
finished. total time: 0.734s
C:\Users\Weeset\Desktop\zenfone2rom>fastboot flash system system.img
target reported max download size of 536870912 bytes
erasing 'system'...
FAILED (remote: Permission denied)
finished. total time: 0.127s
C:\Users\Weeset\Desktop\zenfone2rom>
I don't know what I'm doing wrong.

Did you launch the command window from within the folder where your Rom is located?
Sent from my ASUS_Z00AD using Tapatalk
---------- Post added at 04:09 PM ---------- Previous post was at 04:08 PM ----------
Post a screenshot from your computer screen of the folder where your Rom is located
Sent from my ASUS_Z00AD using Tapatalk

jimchee said:
Did you launch the command window from within the folder where your Rom is located?
Sent from my ASUS_Z00AD using Tapatalk
Click to expand...
Click to collapse
Yes, I did.

Us and and classrooms also extracted to there?
Sent from my ASUS_Z00AD using Tapatalk
---------- Post added at 04:11 PM ---------- Previous post was at 04:11 PM ----------
Ignore that autocorrect
Sent from my ASUS_Z00AD using Tapatalk
---------- Post added at 04:13 PM ---------- Previous post was at 04:11 PM ----------
Are flashtools.zip and adv also extracted there, they should be extracted in the same folder
Sent from my ASUS_Z00AD using Tapatalk
---------- Post added at 04:13 PM ---------- Previous post was at 04:13 PM ----------
adb
Sent from my ASUS_Z00AD using Tapatalk

jimchee said:
Us and and classrooms also extracted to there?
Sent from my ASUS_Z00AD using Tapatalk
---------- Post added at 04:11 PM ---------- Previous post was at 04:11 PM ----------
Ignore that autocorrect
Sent from my ASUS_Z00AD using Tapatalk
Click to expand...
Click to collapse
I extracted the four files from the ROM and then put in the files from flashtools into it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Okay that folder does not seem to have all the proper pieces to me, or mine anyhow, this is how I handled the process, from Mega, download .63 folder as a zip, then extract the zip to folder of same name as zip, that is an option in RAR tool or Winzip, then extract the flashtools zip into the same folder where the full rom is located, on this one extract..... then select the folder where your rom was unzipped to, then go into folder and click on the zip that says system_w_root and extract here, after completed then start fastboot on phone, connect to computer and launch command window from within the folder, then follow flash commands:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
this should work, if not then I am not sure what's going on without having the device physically in hand

jimchee said:
Okay that folder does not seem to have all the proper pieces to me, or mine anyhow, this is how I handled the process, from Mega, download .63 folder as a zip, then extract the zip to folder of same name as zip, that is an option in RAR tool or Winzip, then extract the flashtools zip into the same folder where the full rom is located, on this one extract..... then select the folder where your rom was unzipped to, then go into folder and click on the zip that says system_w_root and extract here, after completed then start fastboot on phone, connect to computer and launch command window from within the folder, then follow flash commands:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
this should work, if not then I am not sure what's going on without having the device physically in hand
Click to expand...
Click to collapse
Is this what it should look like?

Yes
Sent from my ASUS_Z00AD using Tapatalk

So, I tried doing it again, and this is what I got:
C:\Users\Weeset\Desktop\Z00A_WW_2.20.40.63\Z00A_WW_2.20.40.63>fastboot devices
F5AZFG10C556 fastboot
C:\Users\Weeset\Desktop\Z00A_WW_2.20.40.63\Z00A_WW_2.20.40.63>fastboot flash recovery recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (11838 KB)...
OKAY [ 0.578s]
writing 'recovery'...
FAILED (remote: Permission denied
)
finished. total time: 0.734s
C:\Users\Weeset\Desktop\Z00A_WW_2.20.40.63\Z00A_WW_2.20.40.63>fastboot flash boot boot.img
target reported max download size of 536870912 bytes
sending 'boot' (11826 KB)...
OKAY [ 0.531s]
writing 'boot'...
FAILED (remote: Permission denied
)
finished. total time: 0.688s
C:\Users\Weeset\Desktop\Z00A_WW_2.20.40.63\Z00A_WW_2.20.40.63>fastboot flash system system.img
target reported max download size of 536870912 bytes
erasing 'system'...
FAILED (remote: Permission denied)
finished. total time: 0.106s
C:\Users\Weeset\Desktop\Z00A_WW_2.20.40.63\Z00A_WW_2.20.40.63>
Still says Permission denied!
What do you think I can do now?

Which phone do you have, model # and original software version?

ZE551ML, ASUS_Z00AD. How do you find out the original software version? Recovery shows that it has WW firmware, if that helps.

http://androidforums.com/threads/list-of-fastboot-command.714676/ this is a list of fastboot commands, based on some research I did it may be one of two things, corrupted download or files on the device have corrupted something, so this is what I would do, from fastboot
fastboot erase cache
then I would
fastboot erase recovery
then try to flash recovery
fastboot flash recovery recovery.img
let me know if that works
If not it may be your fastboot that is corrupted try flashing droidboot
fastboot flash fastboot droidboot.img
then restart in fastboot using the volume rocker to select bootloader
and try again
---------- Post added at 05:50 PM ---------- Previous post was at 05:42 PM ----------
You can get into recovery?
Sent from my ASUS_Z00AD using Tapatalk

jimchee said:
http://androidforums.com/threads/list-of-fastboot-command.714676/ this is a list of fastboot commands, based on some research I did it may be one of two things, corrupted download or files on
---------- Post added at 05:50 PM ---------- Previous post was at 05:42 PM ----------
[/COLOR]You can get into recovery?
Sent from my ASUS_Z00AD using Tapatalk
Click to expand...
Click to collapse
Yes, I can.

okay, then let's update like and OTA, give me a minute to get the d/l links
---------- Post added at 06:14 PM ---------- Previous post was at 05:55 PM ----------
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE551ML/UL-Z00A-WW-2.20.40.59-user.zip
copy and paste this in your browser, will download the full .59 file since I can't find .63 full link but no matter, after you download it, rename it MOFD_SDUPDATE and place in root of your external sd card, then boot into recovery and it will update automatically and install .59 you should then be able to do OTA to .63.
---------- Post added at 06:17 PM ---------- Previous post was at 06:14 PM ----------
if it doesn't update automatically you should find the d/l link in general section under new update .63, follow the same procedure with the 23mb update file just rename to MOFD_SDUPDATE and place it in external sd, obviously delete or transfer the previous MOFD file, only one can be on sdcard

jimchee said:
okay, then let's update like and OTA, give me a minute to get the d/l links
---------- Post added at 06:14 PM ---------- Previous post was at 05:55 PM ----------
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE551ML/UL-Z00A-WW-2.20.40.59-user.zip
copy and paste this in your browser, will download the full .59 file since I can't find .63 full link but no matter, after you download it, rename it MOFD_SDUPDATE and place in root of your external sd card, then boot into recovery and it will update automatically and install .59 you should then be able to do OTA to .63.
Click to expand...
Click to collapse
How do I access the sd card? The phone doesn't come up under "Devices and Drives" when I plug it into my computer.

take out the sdcard and use your reader in the computer to transfer the file to the sd card, don't put it inside any folder just to root of card

Related

I Need help please

hello everyone
My htc desire hd after a restore unsuccessful system got white screen with just the logo and no longer goes out from there. What to do?
thank you!
excuse my bad english
Your bootloader is stuck
how do I see if he is stuck or not?
is there any way to fix this?
Do you understand adb and fastboot commands? Did u try pulling battery, waiting then powering it on by holding power and volume down to boot to a menu screen?
---------- Post added at 07:55 PM ---------- Previous post was at 07:53 PM ----------
Is your device rooted?unlocked boot loader.. S off? Need more details. Do u have a custom recovery on it?
yes i can go
***UNLOCKED***
ACE PVT SHIP S-ON RL
HBOOT -2.00.029
Microp -0438
Radio - 26.14.04.28_M
eMMC-boot
Recovery?
yes I can still access recovery
i have the clockworkmod recovery v 5.8.0.0 installed in the phone
What ROM were u running when this issue started?
---------- Post added at 09:32 PM ---------- Previous post was at 09:30 PM ----------
You're using an old recovery of cwm. The newer cwm 6.0.4 is recommended. Install that recovery
marknoll said:
What ROM were u running when this issue started?
---------- Post added at 09:32 PM ---------- Previous post was at 09:30 PM ----------
You're using an old recovery of cwm. The newer cwm 6.0.4 is recommended. Install that recovery
Click to expand...
Click to collapse
how do I install cwm 6.0.4?
The ROM has ace_PAC_JB_4.2.2-v22.3.0_20130520-064722.zip
Download cwm 6.0.4 on cwm website...put that file in your fast boot folder...open a cmd prompt in that folder and type fastboot devices. See if PC sees it. A serial number should appear. That means fb recognizes your device. Then fastboot flash recovery "then the recovery name" hit enter. This must all be done on the boot loader screen.
---------- Post added at 10:24 PM ---------- Previous post was at 10:23 PM ----------
P.s. make sure that a ".zip" is at end of recovery name.
---------- Post added at 10:25 PM ---------- Previous post was at 10:24 PM ----------
When successfully flashing recovery, type fastboot reboot recovery. Should bring you there
marknoll said:
Download cwm 6.0.4 on cwm website...put that file in your fast boot folder...open a cmd prompt in that folder and type fastboot devices. See if PC sees it. A serial number should appear. That means fb recognizes your device. Then fastboot flash recovery "then the recovery name" hit enter. This must all be done on the boot loader screen.
---------- Post added at 10:24 PM ---------- Previous post was at 10:23 PM ----------
P.s. make sure that a ".zip" is at end of recovery name.
---------- Post added at 10:25 PM ---------- Previous post was at 10:24 PM ----------
When successfully flashing recovery, type fastboot reboot recovery. Should bring you there
Click to expand...
Click to collapse
cwm site does not have the 6.0.4 version for desire hd
sorry but I do not understand any of this
when I type fastboot devices nothing appears
Thats cuz u probably don't have fastboot drivers installed.
---------- Post added at 01:30 AM ---------- Previous post was at 01:26 AM ----------
https://www.clockworkmod.com/rommanager
marknoll said:
Thats cuz u probably don't have fastboot drivers installed.
---------- Post added at 01:30 AM ---------- Previous post was at 01:26 AM ----------
https://www.clockworkmod.com/rommanager
Click to expand...
Click to collapse
how do I install them?
excuse this inconvenience for you
Put your phone in bootloader mode then plug in PC, PC should automatically install them. If not, download min adb and fastboot program
---------- Post added at 11:58 AM ---------- Previous post was at 11:56 AM ----------
http://forum.xda-developers.com/showthread.php?t=2317790
---------- Post added at 12:07 PM ---------- Previous post was at 11:58 AM ----------
Sara Pinto said:
cwm site does not have the 6.0.4 version for desire hd
sorry but I do not understand any of this
when I type fastboot devices nothing appears
Click to expand...
Click to collapse
Sorry. I meant 5.8.1
---------- Post added at 12:11 PM ---------- Previous post was at 12:07 PM ----------
If the touch recovery doesn't work for ya,try the 5.0.2
marknoll said:
Put your phone in bootloader mode then plug in PC, PC should automatically install them. If not, download min adb and fastboot program
---------- Post added at 11:58 AM ---------- Previous post was at 11:56 AM ----------
http://forum.xda-developers.com/showthread.php?t=2317790
---------- Post added at 12:07 PM ---------- Previous post was at 11:58 AM ----------
Sorry. I meant 5.8.1
---------- Post added at 12:11 PM ---------- Previous post was at 12:07 PM ----------
If the touch recovery doesn't work for ya,try the 5.0.2
Click to expand...
Click to collapse
what am I doing wrong?
HT0CPRX08729 fastboot - This mean that my pc recognizes my phone?
C:\Users\Sara\Desktop\recovery-clockwork-touch-5.8.1.5-saga>c:\windows\system32\
cmd.exe
Microsoft Windows [Versão 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Todos os direitos reservados.
C:\Users\Sara\Desktop\recovery-clockwork-touch-5.8.1.5-saga>fastboot devices
HT0CPRX08729 fastboot
C:\Users\Sara\Desktop\recovery-clockwork-touch-5.8.1.5-saga>fastboot flash recov
ery recovery-clockwork-touch-5.8.1.5-saga
error: cannot load 'recovery-clockwork-touch-5.8.1.5-saga'
C:\Users\Sara\Desktop\recovery-clockwork-touch-5.8.1.5-saga>fastboot flash recov
ery recovery-clockwork-touch-5.8.1.5-saga.img
sending 'recovery' (3518 KB)... OKAY [ 0.657s]
writing 'recovery'... OKAY [ 0.520s]
finished. total time: 1.177s
C:\Users\Sara\Desktop\recovery-clockwork-touch-5.8.1.5-saga>fastboot reboot reco
very
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot + recovery + system
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
reboot reboot device normally
reboot-bootloader reboot device into bootloader
options:
-w erase userdata and cache
-s <serial number> specify device serial number
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address
-n <page size> specify the nand page size. default:
2048
C:\Users\Sara\Desktop\recovery-clockwork-touch-5.8.1.5-saga>
Yes. It sees your phone. Try the 5.0.2. Ur doing it right
marknoll said:
Yes. It sees your phone. Try the 5.0.2. Ur doing it right
Click to expand...
Click to collapse
Microsoft Windows [Versão 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Todos os direitos reservados.
C:\Program Files\Minimal ADB and Fastboot>fastboot devices
HT0CPRX08729 fastboot
C:\Program Files\Minimal ADB and Fastboot>fastboot flash recovery recovery-clock
work-touch-5.8.1.5-ace.img
sending 'recovery' (3554 KB)...
OKAY [ 0.602s]
writing 'recovery'...
OKAY [ 0.511s]
finished. total time: 1.117s
C:\Program Files\Minimal ADB and Fastboot>fastboot reboot
rebooting...
finished. total time: 0.402s
C:\Program Files\Minimal ADB and Fastboot
I tried it but the phone continues with the white screen and the HTC logo and does not come from there
No. Flash the 5.0.2. Touch don't seem to work.
marknoll said:
No. Flash the 5.0.2. Touch don't seem to work.
Click to expand...
Click to collapse
Microsoft Windows [Versão 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Todos os direitos reservados.
C:\Program Files\Minimal ADB and Fastboot>fastboot devices
HT0CPRX08729 fastboot
C:\Program Files\Minimal ADB and Fastboot>fastboot flash recovery recovery-clock
work-5.0.2.0-ace.img
sending 'recovery' (3624 KB)...
OKAY [ 0.606s]
writing 'recovery'...
OKAY [ 0.537s]
finished. total time: 1.151s
C:\Program Files\Minimal ADB and Fastboot>fastboot reboot
rebooting...
finished. total time: 0.401s
C:\Program Files\Minimal ADB and Fastboot>
My phone continues with the white screen and the HTC logo and does not come from there
U have to fastboot reboot recovery
---------- Post added at 04:36 PM ---------- Previous post was at 04:35 PM ----------
Doing that cmd just puts device in a loop
---------- Post added at 04:39 PM ---------- Previous post was at 04:36 PM ----------
OK. With phone powered down...hold power and volume down button til it boots to boot loader. Tell me what u see

Unlock Bootloader on Android 5.1.1 A5CN701?

I've been trying to unlock the bootloader since the A5CN701 update. Here's how i've tried:
1. Go to developer options -> Tick OEM Unlocking
2. Use the launcher.bat from IntelAndroid-FBRL-05-16-2015.7z from this topic http://forum.xda-developers.com/nokia-n1/general/play-store-howto-t3118965
3. Use the T4 option and the tablet ends up like this (because the bootloader is locked):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Use fastboot and enter this code:
Code:
fastboot oem unlock
Then the cmd console and the tablet should look like this:
5. Select ''Yes: change device state'' using the UI on the N1 but here's all i've received:
The result is :''Fail: couldn't change state''
So that's pretty much about how i've tried to unlock the bootloader. I don't know why i couldn't change the device state! Is there anyone that can help me?
I posted this topic so that everyone can join and make suggestions & solutions to rooting the A5CN701 firmware!
Any help would be much appreciated!
P/s: sorry for the sloppy photos, i didn't have time to crop and edit them
it's no use,I use the same way and i get my device state-unlocked.
C：\Dociments and Settings\fldministrator>cd C:\platform-tools
C：\platform-tools>adb reboot bootloader
C：\platform-tools>fastboot oen unlock
<bootloader) Please confirm the device state action using the UI-<bootloader) Userdata erase required, this can take a while ---
OKAV [ 5.844s]
finished- total time： 5.844s
C：\platform-tools>
and then I use the old way to root the device,only end like this.
copy needed files to our deuice
target reported nax download size of 536870912 bytes
sending ^/tmp/recouery.zip^ <3477 KB> • • •
OKAV [ 0.297s]
writing ^/tmp/recovery.zip^ • • •
FAILED <remote： not allowed to flash this partition>
finished, total tine： 0.516s
target reported max download size of 536870912 bytes
sending ^/tmp/recouerv. launcher^ <400 KB> • • •
OKAV [ 0.203s]
writing '/tmp/recouerv. launcher' • • •
FAILED <remote： not allowed to flash this partition>
finished, total tine： 0.422s
we need to stop logcat before replacing it
<bootloader> Start partitioning
OKAY [ 0.406s]
finished, total tine： 0.406s
target reported max download size of 536870912 bytes
sending ^/system/bin/logcat'<178KB
OKAY 【0.219s】
writing '/systen/bin/logcat^•••
FAILED <remote： not allowed to flash this partition>
finished, total tine： 0.422s
issue fastboot oem ''stop.partitioning command to start cwn recouerv：
<bootloader> Stop partitioning
OKAY 【0.391s】
finished, total tine： 0.391s
sorry，can't upload img
PS:if you unlock,the device only stay in bootloader,if you want to open and normal use device,you must lock it.
乄Rain丶Man said:
it's no use,I use the same way and i get my device state-unlocked.
C：\Dociments and Settings\fldministrator>cd C:\platform-tools
C：\platform-tools>adb reboot bootloader
C：\platform-tools>fastboot oen unlock
<bootloader) Please confirm the device state action using the UI-<bootloader) Userdata erase required, this can take a while ---
OKAV [ 5.844s]
finished- total time： 5.844s
C：\platform-tools>
and then I use the old way to root the device,only end like this.
copy needed files to our deuice
target reported nax download size of 536870912 bytes
sending ^/tmp/recouery.zip^ <3477 KB> • • •
OKAV [ 0.297s]
writing ^/tmp/recovery.zip^ • • •
FAILED <remote： not allowed to flash this partition>
finished, total tine： 0.516s
target reported max download size of 536870912 bytes
sending ^/tmp/recouerv. launcher^ <400 KB> • • •
OKAV [ 0.203s]
writing '/tmp/recouerv. launcher' • • •
FAILED <remote： not allowed to flash this partition>
finished, total tine： 0.422s
we need to stop logcat before replacing it
<bootloader> Start partitioning
OKAY [ 0.406s]
finished, total tine： 0.406s
target reported max download size of 536870912 bytes
sending ^/system/bin/logcat'<178KB
OKAY 【0.219s】
writing '/systen/bin/logcat^•••
FAILED <remote： not allowed to flash this partition>
finished, total tine： 0.422s
issue fastboot oem ''stop.partitioning command to start cwn recouerv：
<bootloader> Stop partitioning
OKAY 【0.391s】
finished, total tine： 0.391s
sorry，can't upload img
PS:if you unlock,the device only stay in bootloader,if you want to open and normal use device,you must lock it.
Click to expand...
Click to collapse
If you have got your device unlocked, can you boot into the recovery menu where the option ''Install update from ADB'' is? I can't seem to boot into the recovery menu on the A5CN701? If we can get there, I'm sure we'll figure it out
When running "fastboot flash fastboot droidboot.img" and "fastboot flash boot boot.img" with the files from A5CN507_update.zip i get the IntelAndroid-FBRL-07-24-2015 to run TWRP or CWM.
Drivknuten said:
When running "fastboot flash fastboot droidboot.img" and "fastboot flash boot boot.img" with the files from A5CN507_update.zip i get the IntelAndroid-FBRL-07-24-2015 to run TWRP or CWM.
Click to expand...
Click to collapse
you reboot into the Temporary CWM success?
Xkernels said:
you reboot into the Temporary CWM success?
Click to expand...
Click to collapse
Yes
Drivknuten said:
Yes
Click to expand...
Click to collapse
please, you could post your image?
colorado48 said:
If you have got your device unlocked, can you boot into the recovery menu where the option ''Install update from ADB'' is? I can't seem to boot into the recovery menu on the A5CN701? If we can get there, I'm sure we'll figure it out
Click to expand...
Click to collapse
No,if you unlock device,only stay in bootloader,no matter what your choice，reboot to recovery or power off or anything else. yesterday，i see Root Dell Venue 8 7840 on Android 5.1 Lollipop, which also intel device and run android 5.1.1, it must Flashing Old Firmware and Droidboot,then use the old way to root it, just like the #4 said, but i don't have the N1's old Firmware and Droidboot, so i can't try. now,we just wait #4 upload the img and do what need to do.
---------- Post added at 04:30 AM ---------- Previous post was at 04:25 AM ----------
Drivknuten said:
When running "fastboot flash fastboot droidboot.img" and "fastboot flash boot boot.img" with the files from A5CN507_update.zip i get the IntelAndroid-FBRL-07-24-2015 to run TWRP or CWM.
Click to expand...
Click to collapse
I have the A5CN507_update.zip,could you please tell me how to flash the old droidboot.img and boot.img,
Thx~ plaese
---------- Post added at 04:34 AM ---------- Previous post was at 04:30 AM ----------
p233 said:
please, you could post your image?
Click to expand...
Click to collapse
do you mean you need A5CN507_update.zip?
I have it, it's in a Chinese cloud drive，if you want it ,i can give you the url.
乄Rain丶Man said:
No,if you unlock device,only stay in bootloader,no matter what your choice，reboot to recovery or power off or anything else. yesterday，i see Root Dell Venue 8 7840 on Android 5.1 Lollipop, which also intel device and run android 5.1.1, it must Flashing Old Firmware and Droidboot,then use the old way to root it, just like the #4 said, but i don't have the N1's old Firmware and Droidboot, so i can't try. now,we just wait #4 upload the img and do what need to do.
---------- Post added at 04:30 AM ---------- Previous post was at 04:25 AM ----------
I have the A5CN507_update.zip,could you please tell me how to flash the old droidboot.img and boot.img,
Thx~ plaese
---------- Post added at 04:34 AM ---------- Previous post was at 04:30 AM ----------
do you mean you need A5CN507_update.zip?
I have it, it's in a Chinese cloud drive，if you want it ,i can give you the url.
Click to expand...
Click to collapse
Here is the original old version download link
http://forum.xda-developers.com/nokia-n1/general/nokia-n1-chinese-version-5-1-1-update-t3183529 #3
p233 said:
please, you could post your image?
Click to expand...
Click to collapse
Right now my device is in a bootloop and i have too much work to get anything done with the device right now. So no pic right now.
乄Rain丶Man said:
I have the A5CN507_update.zip,could you please tell me how to flash the old droidboot.img and boot.img,
Thx~ plaese
---------- Post added at 04:34 AM ---------- Previous post was at 04:30 AM ----------
Click to expand...
Click to collapse
1. extract the droidboot.img & boot.img from the A5CN507_update.zip.
2. adb reboot recovery
3. fastboot oem unlock
4. fastboot flash boot boot.img
5. fastboot flash boot boot.img
6. download "IntelAndroid-FBRL-07-24-2015" unzip, run launcher.bat type "ACCEPT" select number 4 or 5 (i have only tested those two). Then option T4 if i remember correctly.
7. Now the device should start receiving the files and start in TWRP or CWM depending on the choices you have made.
Drivknuten said:
Right now my device is in a bootloop and i have too much work to get anything done with the device right now. So no pic right now.
1. extract the droidboot.img & boot.img from the A5CN507_update.zip.
2. adb reboot recovery
3. fastboot oem unlock
4. fastboot flash boot boot.img
5. fastboot flash boot boot.img
6. download "IntelAndroid-FBRL-07-24-2015" unzip, run launcher.bat type "ACCEPT" select number 4 or 5 (i have only tested those two). Then option T4 if i remember correctly.
7. Now the device should start receiving the files and start in TWRP or CWM depending on the choices you have made.
Click to expand...
Click to collapse
2.adb reboot bootloader?
can you provide some pic?
Xkernels said:
2.adb reboot bootloader?
can you provide some pic?
Click to expand...
Click to collapse
Yes that should be adb reboot bootloader.
NO pics possible, my device is in a bootloop and i dont have the time to fix the device until the weekend.
Hi, i seem to have the same problem. ie, N1 stuck in fastboot mode. i have folowed the instructions above, ie;
- successfully unlocked it (fastboot mode reports DEVICE STATE - unlocked)
- extracted boot.img and flashed using fastoboot flash boot boot.img (successful) twice
however, when i run the FBRL script, using option T4 the same problem remains as per the earlier post, ie, it fails at the following point;
writing ^/tmp/recovery.zip^ • • •
FAILED <remote： not allowed to flash this partition>
the script then fails in the same way for recovery.launcher and logcat.
any ideas?
my device now stays in fastboot mode, whether i try chose recovery mode, normal boot etc nothing chances and each time i power cycle it comes back to fastboot mode.
please help. thanks
pdt100 said:
Hi, i seem to have the same problem. ie, N1 stuck in fastboot mode. i have folowed the instructions above, ie;
- successfully unlocked it (fastboot mode reports DEVICE STATE - unlocked)
- extracted boot.img and flashed using fastoboot flash boot boot.img (successful) twice
however, when i run the FBRL script, using option T4 the same problem remains as per the earlier post, ie, it fails at the following point;
writing ^/tmp/recovery.zip^ • • •
FAILED <remote： not allowed to flash this partition>
the script then fails in the same way for recovery.launcher and logcat.
any ideas?
my device now stays in fastboot mode, whether i try chose recovery mode, normal boot etc nothing chances and each time i power cycle it comes back to fastboot mode.
please help. thanks
Click to expand...
Click to collapse
Try "fastboot flash fastboot droidboot.img" with the droidboot.img from the A5CN507_update
Drivknuten said:
Try "fastboot flash fastboot droidboot.img" with the droidboot.img from the A5CN507_update
Click to expand...
Click to collapse
Hi, i was able to submit the command successfully however no change unfortunately. any other ideas? thanks
Drivknuten said:
Right now my device is in a bootloop and i have too much work to get anything done with the device right now. So no pic right now.
1. extract the droidboot.img & boot.img from the A5CN507_update.zip.
2. adb reboot recovery
3. fastboot oem unlock
4. fastboot flash boot boot.img
5. fastboot flash boot boot.img
6. download "IntelAndroid-FBRL-07-24-2015" unzip, run launcher.bat type "ACCEPT" select number 4 or 5 (i have only tested those two). Then option T4 if i remember correctly.
7. Now the device should start receiving the files and start in TWRP or CWM depending on the choices you have made.
Click to expand...
Click to collapse
Then did you root your device successfully？or did you rollback to old version？
乄Rain丶Man said:
Then did you root your device successfully？or did you rollback to old version？
Click to expand...
Click to collapse
Nah i bricked it,
the same thing to me, after i relock bootloader, it jump into a big problem: bootloop, whenever i turn on devices, it just show "android" screen
It's been a while now, can anybody confirm that a root for A5CN701 is on the way?
Drivknuten said:
Nah i bricked it,
Click to expand...
Click to collapse
Oflyt...

Help on upgrading to MM bootloader!!

I am not able to upgrade to MM bootloader cuz of reasons unknown?
can anyone please provide commands for flashing each img or bin separately?
The system cannot find the path specified.
Start flashing ..
error: cannot load 'splashscreen_551.img'
error: cannot load 'bom-token_ze551ml_4_21_40_134.bin'
error: cannot load 'dnx_ze551ml_4_21_40_134.bin'
error: cannot load 'ifwi_ze551ml_4_21_40_134.bin'
error: cannot load 'droidboot_4_21_40_134.img'
rebooting into bootloader...
OKAY [ 0.109s]
finished. total time: 0.109s
Done.
=/ this is what i get
indicate on which firmware you are currently on?? and which method you are trying to send those commands. with some tool? sideload? AFT?
---------- Post added at 02:16 PM ---------- Previous post was at 01:36 PM ----------
https://drive.google.com/open?id=0B72QQTXqZSRweG5sYW0taFoycFE
down load bootloader and click upgrade . then sideload desired firmware. i can tell specific commands if you be little more specific
I am currently on cm 13 7 nov build with LP bootloader..
and i ve used the mm blob updating files provided by cm 14 post and also aicp post.
both of the bat files gives the above result (that error flashing thing.)(thats what the cmd of upgrade.bat displays after opening it. =/)
so basically i need to manually flash all the files that the upgrade.bat file flashes =/

oxygen OS 4.0 no twrp possible

Installed oxygen OS 4.0 everything seems to become OK
but after flashing twrp 3.0.2 to the phone it is just hanging in a black screen.
I tried several twrp alternatives from XDA: always same result.
After some seconds up to some minutes it is possible to reboot but no twrp has been flashed.
The twrp 3.0.2 works fine in the old version of OS oxygen
RoFrie said:
Installed oxygen OS 4.0 everything seems to become OK
but after flashing twrp 3.0.2 to the phone it is just hanging in a black screen.
I tried several twrp alternatives from XDA: always same result.
After some seconds up to some minutes it is possible to reboot but no twrp has been flashed.
The twrp 3.0.2 works fine in the old version of OS oxygen
Click to expand...
Click to collapse
Hi, you can fix it. Flash OnePlus3_OpenBeta7-FIRMWARE+MODEM-flashable.zip
https://www.androidfilehost.com/?fid=457095661767116249
I use this twrp and works!
You need PC to see youre phone in FASTBOOT. ADB + drivers instaled.
Reboot youre phone in Fastboot (Boot loader), then flash recovery. After flashing reboot to recovery.
sakarya1980 said:
Hi, you can fix it. Flash OnePlus3_OpenBeta7-FIRMWARE+MODEM-flashable.zip
https://www.androidfilehost.com/?fid=457095661767116249
I use this twrp and works!
Click to expand...
Click to collapse
I'd like to know some details before installing:
FIRMWARE+MODEM what is this? Is firmware the whole oxygen OS? Modem is for mobile connection like LTE?
What are the advantages in comparison of using the originals?
Can you give me the origin of the twrp you attached?
null0seven said:
You need PC to see youre phone in FASTBOOT. ADB + drivers instaled.
Reboot youre phone in Fastboot (Boot loader), then flash recovery. After flashing reboot to recovery.
Click to expand...
Click to collapse
I think I did exactly what you described. But nothing in the newly flashed TWRP resulted must in a black screen.
Install the modified TWRP v 3.0.2.1-28. Search in XDA you should find it. Flash it and boot into recovery. I installed it and flashed OOS 4.0 OTA through this recovery. Everything is working fine.
Black screen means you did not flash it.
Open Command Promt. Type:
fastboot flash recovery "recovery".img. (name of the recovery between commas)
reboot bootloader.
reboot to recovery.
Because we don't have any twrp updated to support Nougat oos roms. The ones we have can only read decrypted storage. I'm too waiting for someone to pick up the development and build an updated twrp.
Flashing this one works
null0seven said:
Black screen means you did not flash it.
Open Command Promt. Type:
fastboot flash recovery "recovery".img. (name of the recovery between commas)
reboot bootloader.
reboot to recovery.
Click to expand...
Click to collapse
But the log said the flash was ok:
fastboot flash recovery twrp-3.0.2-1-oneplus3.img
target reported max download size of 440401920 bytes
sending 'recovery' (18964 KB)...
OKAY [ 0.432s]
writing 'recovery'...
OKAY [ 0.160s]
finished. total time: 0.594s
---------- Post added at 12:43 PM ---------- Previous post was at 12:33 PM ----------
mavidser said:
Flashing this one works
Click to expand...
Click to collapse
YES
This one works.
But my phone is encrypted and as written by abhibnl decrypting is not possible right now.
RolfFrie said:
But the log said the flash was ok:
fastboot flash recovery twrp-3.0.2-1-oneplus3.img
target reported max download size of 440401920 bytes
sending 'recovery' (18964 KB)...
OKAY [ 0.432s]
writing 'recovery'...
OKAY [ 0.160s]
finished. total time: 0.594s
---------- Post added at 12:43 PM ---------- Previous post was at 12:33 PM ----------
YES
This one works.
But my phone is encrypted and as written by abhibnl decrypting is not possible right now.
Click to expand...
Click to collapse
Yeah, I noticed that too, after writing the comment.
For me though, I only needed to create the Nandroid backup and flash SuperSU, so I flashed the recovery, cancelled the decryption, formatted the data (removing the encryption), adb push'd the zip and installed it.
Any idea how I can turn the encryption back on now?
@RoFrie I originally had the same problem as you but with the difference that my phone was on OOS 3.2.8 and it upgrade to N. after that I tried TWRP but the phone would replace it every time I rebooted. Once I got the right TWRP I can boot to it but the internal drive was encrypted so TWRP was useless. I said forget this crap I'm going back to CM14.1. And as always I felt that I had to get this done. So once on CM14.1 I used TWRP to switch the file system to s2fs flash OOS3.2.8 than I let it do the upgrade yet again. This time when I flashed the TWRP .28 the phones was no longer encrypted,I rooted than its all good now.
Sent from my ONEPLUS A3000 using Tapatalk
What was the file?
RolfFrie said:
But the log said the flash was ok:
fastboot flash recovery twrp-3.0.2-1-oneplus3.img
target reported max download size of 440401920 bytes
sending 'recovery' (18964 KB)...
OKAY [ 0.432s]
writing 'recovery'...
OKAY [ 0.160s]
finished. total time: 0.594s
---------- Post added at 12:43 PM ---------- Previous post was at 12:33 PM ----------
YES
This one works.
But my phone is encrypted and as written by abhibnl decrypting is not possible right now.
Click to expand...
Click to collapse
You need the unreleased beta twrp. Encrypted and rooted OOS 4.0.3 here
Sent from my ONEPLUS A3000 using Tapatalk

Pixel 2 xl only access in bootloader

hello everyone
My pixel 2xl just only boot on bootloader after erase system_a and bla bla. just follow instruction. but when flash the flash-all.bat seem like postive. but the result shown not a same baseband (something like that)
so now my phone only can open bootloader. if trying open recovery in bootloader it will repeat to bootloader back.
just hope someone can help me. my fault cause take it easy as like others smartphone to root.
maybe cause the erase system. all the partition is empty ?
this all quarantine fault :crying:
please helpppp
:crying::crying::crying::crying::crying::crying::crying::crying::crying:
syeikh52 said:
hello everyone
My pixel 2xl just only boot on bootloader after erase system_a and bla bla. just follow instruction. but when flash the flash-all.bat seem like postive. but the result shown not a same baseband (something like that)
so now my phone only can open bootloader. if trying open recovery in bootloader it will repeat to bootloader back.
just hope someone can help me. my fault cause take it easy as like others smartphone to root.
maybe cause the erase system. all the partition is empty ?
this all quarantine fault :crying:
please helpppp
:crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Why would you erase the system? Were you trying to flash another ROM or something?
---------- Post added at 11:05 AM ---------- Previous post was at 11:03 AM ----------
You'll most likely need to re-flash a stock image.
https://developers.google.com/android/images
Fastboot flash your bootloader, radio then vendor on both slots then try again.
Ragarianok said:
Why would you erase the system? Were you trying to flash another ROM or something?
---------- Post added at 11:05 AM ---------- Previous post was at 11:03 AM ----------
You'll most likely need to re-flash a stock image.
https://developers.google.com/android/images
Click to expand...
Click to collapse
hm. im just follow instruction from
https://forum.xda-developers.com/pixel-3-xl/how-to/guide-progress-available-t3876849
everything okay but its failed in the step F
now it only can open bootloader.
and my bootloader version change from TMZ30 to TMZ10n
Edmontonchef said:
Fastboot flash your bootloader, radio then vendor on both slots then try again.
Click to expand...
Click to collapse
did you have the instruction or link ?
i will make the problem more hardly :crying::crying::crying:
syeikh52 said:
did you have the instruction or link ?
i will make the problem more hardly :crying::crying::crying:
Click to expand...
Click to collapse
Make sure adb and fastboot are installed
Download and extract taimen factory image
Double click to open
Extract the taimen folder found in the factory image. That has the vendor image
Open terminal and type adb devices to make sure you have adb connected. Boot to bootloader
Here's the commands, after the command hit space then drag and drop the image hit enter.
Fastboot flash bootloader_a (bootloader)
Reboot bootloader
Same command but with _b
Then radio and vendor same way rebooting bootloader after each flash
Now you can use that taimen folder you extracted. Drag and drop same as images
Fastboot update (taimen folder)
It'll take a few minutes to do it's thing
---------- Post added at 02:57 AM ---------- Previous post was at 02:53 AM ----------
ABC ezio has some better instructions
https://forum.xda-developers.com/cu...ive/rom-builders-collective-t2861778/page2324
Edmontonchef said:
Make sure adb and fastboot are installed
Download and extract taimen factory image
Double click to open
Extract the taimen folder found in the factory image. That has the vendor image
Open terminal and type adb devices to make sure you have adb connected. Boot to bootloader
Here's the commands, after the command hit space then drag and drop the image hit enter.
Fastboot flash bootloader_a (bootloader)
Reboot bootloader
Same command but with _b
Then radio and vendor same way rebooting bootloader after each flash
Now you can use that taimen folder you extracted. Drag and drop same as images
Fastboot update (taimen folder)
It'll take a few minutes to do it's thing
---------- Post added at 02:57 AM ---------- Previous post was at 02:53 AM ----------
ABC ezio has some better instructions
https://forum.xda-developers.com/cu...ive/rom-builders-collective-t2861778/page2324
Click to expand...
Click to collapse
already follow but failed
C:\Users\LEGION\Desktop\repair\taimen-opd1.170816.010>fastboot flash bootloader_a C:\Users\LEGION\Desktop\repair\taimen-opd1.170816.010\image-taimen-opd1.170816.010\vendor.img
Sending 'bootloader_a' (349408 KB) FAILED (Write to device failed (Invalid argument))
fastboot: error: Command failed
:crying::crying::crying::crying::crying:
Sorry for slow replying.
btw before im using andriod 10. but im downloading a 8.0.0 (OPD1.170816.010, Sep 2017)
erkk
im using standard cmd. should i open as admin ?
Edmontonchef said:
Make sure adb and fastboot are installed
Download and extract taimen factory image
Double click to open
Extract the taimen folder found in the factory image. That has the vendor image
Open terminal and type adb devices to make sure you have adb connected. Boot to bootloader
Here's the commands, after the command hit space then drag and drop the image hit enter.
Fastboot flash bootloader_a (bootloader)
Reboot bootloader
Same command but with _b
Then radio and vendor same way rebooting bootloader after each flash
Now you can use that taimen folder you extracted. Drag and drop same as images
Fastboot update (taimen folder)
It'll take a few minutes to do it's thing
---------- Post added at 02:57 AM ---------- Previous post was at 02:53 AM ----------
ABC ezio has some better instructions
https://forum.xda-developers.com/cu...ive/rom-builders-collective-t2861778/page2324
Click to expand...
Click to collapse
Thanks bro idk why
but im just changing the port ti 2.0
before using C to C
then using C to A still problem
now using C to A but using usb hub because this LEGION gaming laptop All usb 3.0
:crying::crying::crying:
now just wanna try to install TWRP
Download twrp.IMG
Fastboot boot (twrp.img)
Go to settings and disable screen timeout and the swipe to install twrp app. Don't need it.
You can flash a stock ota on twrp.
Put whatever you need on a type c thumb drive (stock ota, twrp installer zip, roms) and mount it in twrp.
Just keep in mind if you are going backwards, you'll have to format data.

Categories

Resources