Hi Guys,
Just bought the fire tv and was looking to sideload the kodi app to it. Unfortunately at home I don't have access to a computer so have brought it into work were I work on both mac and pc. I am unable to connect via hdmi to view the menu options but should be able to tell the ip address of my fire tv via my network.
My question is if I sideload an app and once finished I power down the fire tv will this work when I go home and power back on again?
I have already enabled adb debugging at home.
Thanks for your time
Darren
Shouldn't be an issue..
If you have an android phone you can sideload via agk fire
Hi this is my first post in the forum,
I'd been using FireTV with XBMX 13.2 for a while. I rooted it and had a good config with Llama that made the device to boot directly to XBMC.
I have tried to upgrade to Kodi with ADB Install (Not using -r). From the Android Applications I could start Kodi fine but wanted to have it boot to kodi directly so I did a ADB uninstall org.xbmc.xbmc. from my pc After that FireTV got hanged when rebooted on the Amazon FireTV screen and could not get in anymore as it stopped to be visible on the network(Can´t ping).
Is there any workaround/solution to this situation?
I read in other site that I should plug a usb keyboard to solve it is this the only way? In that case I will have to find one as I mine is PS2.
Thanks a lot.
Looks like I bricked my fireTV Stick today.
What i did: After i updated to 5.2.1.0 I rooted with Kingo Root. I checked if everything was still running fine, which was the case.
Then i removed Kingo Root App and the superuser app that came with Kingo Root. I installed Chainfires latest supersu.apk which did not work (immediately crashed after start). Then i downloaded older version v1.97 of chainfires supersu. This version did not crash directly after starting it. It asked to update the su binary, which I accepted. Unfortunately it did not seem to work, that's why i rebooted the stick after some minutes.
Now it stucks at the "fireTV stick" logo.
Connection to adb works if i connect the Stick to my PC.
Is there anything i can try? Is there a way to factory reset via adb or anything like that?
Bierfreund said:
Looks like I bricked my fireTV Stick today.
What i did: After i updated to 5.2.1.0 I rooted with Kingo Root. I checked if everything was still running fine, which was the case.
Then i removed Kingo Root App and the superuser app that came with Kingo Root. I installed Chainfires latest supersu.apk which did not work (immediately crashed after start). Then i downloaded older version v1.97 of chainfires supersu. This version did not crash directly after starting it. It asked to update the su binary, which I accepted. Unfortunately it did not seem to work, that's why i rebooted the stick after some minutes.
Now it stucks at the "fireTV stick" logo.
Connection to adb works if i connect the Stick to my PC.
Is there anything i can try? Is there a way to factory reset via adb or anything like that?
Click to expand...
Click to collapse
Connect your fire stick to a windows pc/laptop. (i used windows 10 64bit)
Let the drivers install.
Download the windows version of Kingo root.
Click root, try this a couple of times (it probably will fail and stick at 70 percent)
unplug the stick and try again, when it hits 70 percent again plug your hdmi lead in (already connected to tv)
It should root and write back the correct su files.
If you want to unroot, install kingo and super user again on the fire stick then either use the unroot feature in super user app (you will have to purchase mouse toggle for fire tv, if you havent got it already to navigate to the 3 little dots menu icon top right corner)
Or re plug it into windows pc/laptop and unroot through the windows tool.
Worked! Did not know, that there's also an windows application for Kingo root.
So it's better to not use another superuser app when rooting the fireTV (stick) with Kingo root?
Thanks sconnyuk. I have a bricked Stick from the Feb. KingRoot -> SuperSUMe disaster. Tried a lot of things, no luck.
But the Windows KingoRoot worked on the first try. (No 70% stoppage or anything.) I now have a root shell over adb. I'm going to wait on a rooted ROM to get it back to a normal state, but at least now I have hope.
Bierfreund said:
Worked! Did not know, that there's also an windows application for Kingo root.
So it's better to not use another superuser app when rooting the fireTV (stick) with Kingo root?
Click to expand...
Click to collapse
Just use Kingo roots superuser. Im going to try a few different su versions later see if I have any luck.
At the moment any other than kingoroots will brick, (caun unbrick if in this situation so I guess anyome can try)
---------- Post added at 05:53 PM ---------- Previous post was at 05:52 PM ----------
ftgftg said:
Thanks sconnyuk. I have a bricked Stick from the Feb. KingRoot -> SuperSUMe disaster. Tried a lot of things, no luck.
But the Windows KingoRoot worked on the first try. (No 70% stoppage or anything.) I now have a root shell over adb. I'm going to wait on a rooted ROM to get it back to a normal state, but at least now I have hope.
Click to expand...
Click to collapse
No need to wait. Try this guide ive put together, just do it over usb. Cant see why I wouldnt work.
http://forum.xda-developers.com/fire-tv/development/fire-tv-stick-downgrade-firestarter-3-2-t3399298
sconnyuk said:
Connect your fire stick to a windows pc/laptop. (i used windows 10 64bit)
Let the drivers install.
Download the windows version of Kingo root.
Click root, try this a couple of times (it probably will fail and stick at 70 percent)
unplug the stick and try again, when it hits 70 percent again plug your hdmi lead in (already connected to tv)
It should root and write back the correct su files.
If you want to unroot, install kingo and super user again on the fire stick then either use the unroot feature in super user app (you will have to purchase mouse toggle for fire tv, if you havent got it already to navigate to the 3 little dots menu icon top right corner)
Or re plug it into windows pc/laptop and unroot through the windows tool.
Click to expand...
Click to collapse
Thanks for the tutorial. But it doesn't work for me. I have and old fire stick TV with 5.0.5 that I bricked with KingRoot (not Kingo) -> SuperSUMe. I tried to follow your steps and KingoRoot goes to 100% at the first time. But when I connect the stick to my PC it's still stucks at the FireTV Logo . I don't know if I followed some step wrong.
PS: Sorry for my bad english.
SrTommy said:
Thanks for the tutorial. But it doesn't work for me. I have and old fire stick TV with 5.0.5 that I bricked with KingRoot (not Kingo) -> SuperSUMe. I tried to follow your steps and KingoRoot goes to 100% at the first time. But when I connect the stick to my PC it's still stucks at the FireTV Logo . I don't know if I followed some step wrong.
PS: Sorry for my bad english.
Click to expand...
Click to collapse
Try multiple times with Kingoroot, You can try windows version of KING root multiple times also.
Failing this you can try to run both programs simultaneously.
Good luck
sconnyuk said:
Try multiple times with Kingoroot, You can try windows version of KING root multiple times also.
Failing this you can try to run both programs simultaneously.
Good luck
Click to expand...
Click to collapse
It finally works!!!...... almost
Now the sticks pass the fire tv logo, but takes a lot of time to open the firestarter menu. And I can't do anything there. The remote doesn't response. I try to do a factory reset to the stick but I can't find the way . Thank you anyway. At least I can escape from the loop at boot.
SrTommy said:
It finally works!!!...... almost
Now the sticks pass the fire tv logo, but takes a lot of time to open the firestarter menu. And I can't do anything there. The remote doesn't response. I try to do a factory reset to the stick but I can't find the way . Thank you anyway. At least I can escape from the loop at boot.
Click to expand...
Click to collapse
Try removing the batteries and re-pairing the remote, try this multiple times as it has happened to me before.
sconnyuk said:
Try removing the batteries and re-pairing the remote, try this multiple times as it has happened to me before.
Click to expand...
Click to collapse
I thought that I had edited my previous post but it seems that it didn't save the changes. Finally I could restore my fire stick following your downgrade guide. I reinstalled the firmware 5.0.5 and everything works perfect. Thanks a million!!!
SrTommy said:
I thought that I had edited my previous post but it seems that it didn't save the changes. Finally I could restore my fire stick following your downgrade guide. I reinstalled the firmware 5.0.5 and everything works perfect. Thanks a million!!!
Click to expand...
Click to collapse
Your welcome.
Glad I could help.
Hi,
I tried to install XPosed to be able to install Google Play store later following a guide I successfully used on my rooted FTV 1st gen.
XPosed installation went fine but probably I deleted some user file I had not and box started checking for updates. I stopped the process in the meantime. Nothing seems to be affected. Root is still in place and firmware version is still 5.0.5. BUT each time a reboot my stick now it asks to pair my remote, then asks me to choose a language as it wants to complete an update. Just when I goes further it says that it has not been possibile to complete update. I tried to "downgrade" with a clear 5.0.5 firmware zip. It went fine but I had to disable OTA again to avoid the online updates. So it still fails to check for updates and each time it tries to reinitialize update process. basically default amazon launcher doesnt work anymore but it's not a issue cause I have Firestarter 3.3 which works fine. The worst issue is that each time I reboot it asks for rempote pairing and I can't use amazon video anymore. Basically I'd like to remove this "checking for update" process and return to my actual rom. Is that possibile?
Thanks.
puppinoo.
Hoping someone can help me out. My stick is bricked. I loaded up the Kingoroot and tried to run the steps to recover it. However i dont think it's recognize the device since kingoroot is stuck at the loading page. Which driver files did you install for the fire stick? thanks.
Bricked fire stick- any advice
I tried to transfer a ustv4.0 APK zip file to the firestick via USB after some extensive instructions on YouTube video but found that using Google Drive with ES File Explorer would be the quick and easy method. I also got lost in the instructions after downloading ADB and fire starter. When plugging the firestick back into the TV to go the ES file route, the firestick doesn't even show up on the TV now- the HDMI port that I had used would display 'fire stick' and display the HDMI port #, now nothing shows up and then the screen times out quickly as if nothing is plugged in. When I first plugged in the firestick to my windows 10 laptop, I checked the drives and it didn't show up although I could hear a USB connection chime as if something just was connected and if I disconnected it, it had a disconnect chime as well. I did see in device manager before unplugging it that it had shown up as 'unknown device' towards the bottom land labeled as AFTM. Can anyone tell me what they think may have gone wrong and why it no longer shows up on the TV or why it's now not starting up for that matter? Any help would be appreciated.
tjmethod said:
I tried to transfer a ustv4.0 APK zip file to the firestick via USB after some extensive instructions on YouTube video but found that using Google Drive with ES File Explorer would be the quick and easy method. I also got lost in the instructions after downloading ADB and fire starter. When plugging the firestick back into the TV to go the ES file route, the firestick doesn't even show up on the TV now- the HDMI port that I had used would display 'fire stick' and display the HDMI port #, now nothing shows up and then the screen times out quickly as if nothing is plugged in. When I first plugged in the firestick to my windows 10 laptop, I checked the drives and it didn't show up although I could hear a USB connection chime as if something just was connected and if I disconnected it, it had a disconnect chime as well. I did see in device manager before unplugging it that it had shown up as 'unknown device' towards the bottom land labeled as AFTM. Can anyone tell me what they think may have gone wrong and why it no longer shows up on the TV or why it's now not starting up for that matter? Any help would be appreciated.
Click to expand...
Click to collapse
Hi did you find a solution. I have the same problem.
Thx
firetv 1 st gen was Birked only white amazon logo . ( in the past i used keyboard and manage to factory reset ) but not with this firetv .
i manage using fast boot to instal recovery .
now i can use the keyboard to have access to recovery menu
i can connect using adb .
i pushed many roms and fallow installation from scared
i get update or installation from scared complete . but with red kernel: not dispatched
when i reboot i get only white amazon logo hunging .
i do not care about rooting all i want is bring my amazon to boot again normally
please how i do .
ps i have access to recovery menu
i can connect with adb .
god bless i tried everything in this forum .
it looks like no one knows or no one gives damn
If you install kingroot on a Windows PC and then plug that into the Amazon device.
If you set kingroot to automatically root your Amazon device it should automatically reinstall the factory image if it fails to root it for you.
This is how I unbricked a fire TV stick. I understand that this is a full fire TV, however if you are stuck what have you got to lose.
Alternatively if you have installed TWRP, then you should be able to mount external devices and install the factory image from there yourself...
jeremysimons said:
If you install kingroot on a Windows PC and then plug that into the Amazon device.
If you set kingroot to automatically root your Amazon device it should automatically reinstall the factory image if it fails to root it for you.
This is how I unbricked a fire TV stick. I understand that this is a full fire TV, however if you are stuck what have you got to lose.
Alternatively if you have installed TWRP, then you should be able to mount external devices and install the factory image from there yourself...
Click to expand...
Click to collapse
hi bro
i hav now fire stick that don't update it stuck om update screen and go no further can not allow me to get to registration .
i tried to use king root but the pc dod not recognize the fire stick so the process did not happen how to do it thx
can not connect to adb or anything but can connect to a wifi
Sorry for the late reply on this, I only just saw it when I installed xda labs.
Firstly use Windows 7 or 10, which version did you use? Secondly you will need to follow the respective instructions to install kingroot. For instance Windows does not come with complete USB drivers and needs to install Android drivers for each device. You can get round part of this by installing the Android SDK which includes a repository of most drivers. Test it is working first with a phone or tablet.
I assume you have the internet enabled on both the windows device and fire TV stick? You will probably also need to ignore any false positives from virus guard software during the process and temporarily (keep it safe by avoiding doing anything else on the internet!) Turning off your firewall.
Finally kingroot has many fake copies floating around! Only follow genuine threads from xda. (I would give a link but have noticed they change from time to time because of the nature of these apps).
I have successfully un-softbricked both my fire TV sticks using this process. Good luck!
I know I can transfer via adb over my network but is there a way to transfer apks and files directly to the fire tv stick? Has anyone been able to access the file system without registering the device. I remember a long time ago on the fire tv's there was a way to do this via adb but can this be done with a hard cable directly from computer?
Go to this site to get drivers for fire stick, install them , and plug your fire stick in with just usb to your computer(wait for windows to say your hardware is ready to use). You can also install apps using adb. Worked for me on Windows 10.
https://developer.amazon.com/docs/fire-tv/connecting-adb-to-device.html
srk707 said:
Go to this site to get drivers for fire stick, install them , and plug your fire stick in with just usb to your computer(wait for windows to say your hardware is ready to use). You can also install apps using adb. Worked for me on Windows 10.
https://developer.amazon.com/docs/fire-tv/connecting-adb-to-device.html
Click to expand...
Click to collapse
Thank you for that link and info. Do you know if I have to log into an account before doing this transfer? Or can I just open the package plug it in and transfer the files?
I was already logged in, so don't know. But you don't have register the stick. Try plugging it in and see if windows will recognize it.