Possible to Root 5.1.1 with Fingerprint Reader? - T-Mobile Samsung Galaxy S6 Edge

I'd prefer to keep Knox untripped, but I can deal with that (I think - hoping Xposed root cloaking will keep any apps that would misbehave at bay). So can one get root on 5.1.1 and have the fingerprint reader work?

Related

Current status of root and Knox for 5.1.1?

It's kind of difficult to determine where the T-Mobile variant stands with 5.1.1. I know that root is obtainable and that Knox tripping can be avoided, but the caveat is that the fingerprint sensor is disabled.
Does anyone know if that has changed? I'm rooted on 5.0.2, everything unlocked, and I'm using it on AT&T. I want to be able to update to alleviate the RAM issue, but I want to keep root, the fingerprint sensor, and eventually be able to use Samsung Pay etc.
Nope, not yet do able and keep fingerprint sensor working. You need a engineering bootloader to be rooted and not trip Knox on 5.1.1

Rootkeeper for 5.0.2-5.1.1?

Back in the day I used to use Voodoo OTA rootkeeper to keep root through updates, but I think that process was broken late in KitKat - is there anything like that for Lollipop which would allow allow acceptance of an OTA update and manage to keep root?
Thanks!
Sadly nothing I have seen that actually works. If you want root on 5.1.1 you need to sacrifice Knox or run an engineering bootloader and lose fingerprint reader.

AT&T Note 4 Temporary Root

I Finally Got Temporary Root On The AT&T Samsung Galaxy Note 4 (and yes it is SuperSU, bit it does require KingRoot)
I Did It
can you post the software info page with the build for verification of which device it's on?
Like you want the build number?
BTW here is how to do it
https://youtu.be/Xr_2LQimK9I
This is temporary root which means that once you reboot you're going to lose root... Sadly not much new...
Sent from my SAMSUNG-SM-N910A using Tapatalk
Meh, I know but it's better than nothing
Well if this is true it is new because it's on 5.1.1 and not 4.4.4. Going to give it a shot...
So I've tried twice now to root using Kingroot 4.8.0 on Android 5.1.1 and twice my phone has rebooted at the very end when I was trying to download SuperSUMe from the Playstore (did look like root was successful). Might have better luck if I factory reset my phone, but I'm not that interested in getting root.
I can verify that this indeed does provide a temp root on at&t note 4 v5.1.1
BUT! It causes the system to slow down and lag alot and the keyboard no longer works untill the phone is rebooted and when you reboot the samsung startup screen shows a padlock that says custom. So the guys at kingoroot have manged to find a small crack but it is to unstable to use at this time.
I did test out the root permissions on a few apps
1: es file explorer. (I was able to set rw permissions and move files from the internal to ext sd card and see root folders and files in the system)
2: lucky patcher (it was able to gain root and modify installed packages on the fly)
3: es task manager (i was able to acess the root features but changes did not stick)
My hope is maybe someone can learn from this and make the temp root more stable even if temporary (i kinda doubt it since gaining temp root seems to freak the system out causing glitches and stutters)
I obtain temporary root indeed the only I could achieve is, wipe bloatware and change font lol.... So far so good
Well remember, with Samsung changing the system on Android 5.1.1 now requiring a custom kernel to root one of their devices and knowing that AT&T locked the bootloader, this is the best we can get as of right now. Give the developers of KingRoot time because they have tried to root the note 4 without needing a custom kernel. I know it doesn't seem like a lot but give them time. We have wait this much for root. Why not wait a little bit longer for the root to stabilize?
Btw guys I rooted my note 4 on KingRoot v4.8.1, they haven't released this version on their website yet
And supersume pro probably won't work on this
I use the terminal emulator and a root script
DAKILLER29 said:
Well remember, with Samsung changing the system on Android 5.1.1 now requiring a custom kernel to root one of their devices and knowing that AT&T locked the bootloader, this is the best we can get as of right now. Give the developers of KingRoot time because they have tried to root the note 4 without needing a custom kernel. I know it doesn't seem like a lot but give them time. We have wait this much for root. Why not wait a little bit longer for the root to stabilize?
Click to expand...
Click to collapse
There is a bounty regarding it, if they achieve completely root, 8,000 dollars are waiting for anyone achieving it
4.8.1 does stabalize things a little but i can guarantee just aboit that they are using a hole in the stock keyboard to obtain temp root i am going to experiment with non stock keyboards and see what happens from there. I also noticed that the phone gets hot when rooted
Does this temporary root allow the 910A to act as a wifi hotspot?
I was just about to list my Note 4 on Swappa. I can get by without root most of the time but when I need a hotspot, I really need it so I'm back on my Z2 for the moment.
terryowen said:
Does this temporary root allow the 910A to act as a wifi hotspot?
I was just about to list my Note 4 on Swappa. I can get by without root most of the time but when I need a hotspot, I really need it so I'm back on my Z2 for the moment.
Click to expand...
Click to collapse
At the moment NO temp root is not stable enough to reliably run long enough to enable and keep enabled wifi hotspot unless your carrier has opened that option. Lucky for me wifi teathering is included in my plan with at&t
Any way to run Xposed with this?
So is it available for download somewhere? Or will it be soon?
terryowen said:
Does this temporary root allow the 910A to act as a wifi hotspot?
I was just about to list my Note 4 on Swappa. I can get by without root most of the time but when I need a hotspot, I really need it so I'm back on my Z2 for the moment.
Click to expand...
Click to collapse
After delete all the bloatware it allow me to use Hotspot without need foxfi but I'm in Verizon so I couldn't tell you if it applies the same in at&t but I'm sure one of the program installed is the one that blocks or prevents Hotspot to work properly
I used Kingroot 4.8.1 (after you install 4.8.0 and open the app it tells you to update it) on my N910A and it got to 25% and failed? Happened a few times

Root + Android Pay. What does OEM Unlock do?

I rooted my phone only so I could use AdAway. So once I update the hosts file with AdAway, technically I can disable root and only enable root once a week or so to re-run AdAway and update the hosts file again correct?
So I want to use Android Pay too... I keep reading that if I disable root in SuperSU it'll work, but my Android Pay flat out rufuses to work.
Only other thing I can think of is disabling OEM Unlock. What does that even do? I'm currently running custom recovey (TWRP).
Does OEM Unlock need to remain enabled? Could that prevent Android Pay working when SuperSU root is disabled?
Thanks
If your root method modified /system/ then you will never be able to use Android Pay as it checks this. Even systemless root stopped working with the August security patch. It's why I didn't root my Note 7 when I got it because I figured this out on the 6P. Sad but true.
Is there a way to un-root and re-root quickly? I disabled root in SuperSU but it doesn't help.
All I really want to do is block ads via the host file with adaway (which is how it works right?) And I can enable root every time I want to update the ad block list.
Thanks for reply
I found a few ways to do it on other sections of this forum but they seemed tedious and I haven't really looked since the August patch flarked everything up for folks who want AP. Sorry. I wish I could answer.

Root & Rom Advice from the Ground Up

I need some help and I've looked all over but the information is fragmented and there is too many unfamiliar acronyms used which make it incredibly difficult for some like myself to catch up. So for the benefit of others who may be new I wanted to get some additional guidance.
I got the Pixel XL Google Version
Objectives:
1. Root with the ability to hide root so other apps will work
2. Native Mobile Hotspot
3. The ability to easily receive android updates without having to reflash etc..
4. Stay close to stock if possible, but willing to explore other options as long as security is trusted, and has good
compatibility.
5. Security is a concern, I tried a rom in the past with a Galaxy S4 and swear it had a backdoor installed in the rom.
What do you guys recommend? And how do I go about doing it?
Thank you!
If security is truly a concern you will not unlock your bootloader and root your phone.
Otherwise it all depends on which version phone you have, Verizon or Google?
1. You need magisk root for that.
3. No updates when you are rooted
4.5. Never heard of any custom rom with a backdoor. That's absolutely bull****. More likely it was an app you installed.
Unlocked bootloader is a security issue, so better to stay on full stock.
Root is a big security issue so better stay on full stock.
Jokes aside the only security issue is your phone gets stolen or you install apps outside playstore.
If you stay encrypted and use a hard pattern with fingerprint you are fine and there is always the way to delete your phone when it gets stolen.
mikaole said:
1. You need magisk root for that.
3. No updates when you are rooted
4.5. Never heard of any custom rom with a backdoor. That's absolutely bull****. More likely it was an app you installed.
Unlocked bootloader is a security issue, so better to stay on full stock.
Root is a big security issue so better stay on full stock.
I have the Pixel XL - Google Version
Jokes aside the only security issue is your phone gets stolen or you install apps outside playstore.
If you stay encrypted and use a hard pattern with fingerprint you are fine and there is always the way to delete your phone when it gets stolen.
Click to expand...
Click to collapse
My point about security really was that it's quite possible a ROM could have a backdoor. That a side..
Root is not a big security issue for me as long as the rom is trusted etc..
Shouldn't I be able to turn root off then be able to update and turn it back on again?
jadensmith said:
1. Root with the ability to hide root so other apps will work
Click to expand...
Click to collapse
It's possible to root to one slot with SuperSU while the other slot remains unrooted, and then the phone can be switched between slots with TWRP or fastboot commands. Kernels have been posted with safetynet patches, to hide that the bootloader is unlocked, but I'm not sure if any are available with the software version on my phone's current slot. As noted, Magisk can also hide root and that the bootloader is unlocked, so it's probably less hassle than trying to root and hide using SuperSU.
3. The ability to easily receive android updates without having to reflash etc.
Click to expand...
Click to collapse
FlashFire can use the OTA to update and stay rooted with SuperSU. The past couple months I've used FlashFire to update my phone, and it seems quicker and easier than the sideloading and reinstalling process I had been using. I'm not aware of anything similar to FlashFire for Magisk users, so to me it seems like you would have to decide if 1 or 3 is more personally important.
jadensmith said:
Shouldn't I be able to turn root off then be able to update and turn it back on again?
Click to expand...
Click to collapse
While reading I got the impression that I might be able to uninstall SuperSU and use the OTA update, but that didn't work with SuperSU the times I tried it, so I presume something SuperSU changed or something I did with root must have caused the update to fail. I haven't read the Magisk threads as much, yet I've seen that other SuperSU users also indicate that OTA updates no longer worked for them after rooting the phone.
alluringreality said:
It's possible to root to one slot with SuperSU while the other slot remains unrooted, and then the phone can be switched between slots with TWRP or fastboot commands. Kernels have been posted with safetynet patches, to hide that the bootloader is unlocked, but I'm not sure if any are available with the software version on my phone's current slot. As noted, Magisk can also hide root and that the bootloader is unlocked, so it's probably less hassle than trying to root and hide using SuperSU.
FlashFire can use the OTA to update and stay rooted with SuperSU. The past couple months I've used FlashFire to update my phone, and it seems quicker and easier than the sideloading and reinstalling process I had been using. I'm not aware of anything similar to FlashFire for Magisk users, so to me it seems like you would have to decide if 1 or 3 is more personally important.
That didn't work with SuperSU the times I tried it, so I presumed that something I did with root must have caused the update to fail to install.
Click to expand...
Click to collapse
Wow thanks for the great reply! It's so refreshing!
What do you mean by root one slot?
The phone has two "slots" for Android. The basic idea is that you have two copies of Android on the phone that share the same user data. On a stock phone it's intended to allow for less noticeable updates, and it also can allow the phone to fall back to the previous software version if something goes wrong with an update. On the May update my phone did automatically switch between slots, due to what is discussed in the second link below. The first link below gives some information and additional links to discussion about the slots on these phones.
http://www.androidpolice.com/2016/1...-partition-changes-and-new-fastboot-commands/
https://forum.xda-developers.com/an...signing-boot-images-android-verified-t3600606
Is it possible to keep stock or near stock and just have root with the ability to hide root, and hotspot?
That's all I really need. What would be the best way to to do this?

Categories

Resources