Develop Bugs

[Q]I747 Stuck at Samsung logo after flash from cm10.1 to stock rom UCDLK3

My AT&T GS3 is with CM10.1 nightly.
I tried to flash it back to Samsung stock ROM 4.1.1 using odin.
I flashed it with UCDLK3 using odin without doing a factory reset.
When the phone reboot, it stuck at samsung logo.
I can still go into download mode now.
I guess since cm10.1 is 4.2.1, while samsung stock rom is 4.1.1
the system partition might changed from 4.1.1 to 4.2.1
I think that's why it stuck at Samsung logo.
what should I do to restore the phone?
Many thanks!

Load stock rom from odin on your pc.
Sent from my SAMSUNG-SGH-I747 using xda premium

If you can boot into recovery do a factory reset.

You're sticking due to the lack of a factory reset - you need to boot into recovery (with phone off, Vol Up + Home + Power until you see the Samsung logo and blue text) and do that.

after flashing with stock firmware and factory reset still on logo what would i do next?

[Q] Galaxy Note II GT-N7100 Won't Startup (Soft Bricked Please help)

Hello every one!
I have a problem with my Galaxy Note II N7100. I was trying to install a custom rom but ended up in a boot loop.
here is what happened:
First I rooted my phone with a Galaxy Note 2 Toolkit V3.0.0
after rooting i noticed that when i try to go to recovery my screen splashes, flickers for some time and goes blank. And some times it keeps doing this infinitely.
Then i installed TWRP latest version but it didn't fixed the problem. After trying several option i some how went into the TWRP recovery and installed a custom ROM but my phone did not booted. Same screen flickering problem.
I decided to flash a stock rom ALJ2 (which was the stock rom when i bought the phone)
I flashed the stock rom, now the problem is my phone goes into boot loop and wont start.
Now my phone dont start up.
It has binary counter raised to 4 (Can't use triagle away because phone can not boot)
I dont have any recovery but my phone can access downloading mode.
if i flash any stock rom it just goes to boot loop. (i tried ALJ2 & DLK7)
I tried USB Jig method but it did not reset my binary counter to zero.
Any help will be much appreciated, as my phone is brand new and still under warranty.
Regards,

Does a red light glow when you start the phone ?
Sent from my GT-N7100

I'm using Philz recovery, if this thing happened on me, I would do a full wipe through recovery... and flash back stock ROM/custom ROM again...
Sent from my GT-N7100 using xda premium

Thank you Guys for your help.
I got a work around for the situation.
i Flashed stock ROM ALJ2
but phone did not booted
anyways i flashed CMW recovery
phone booted into the recovery...
then i flashed a custom ROM LiquidSmooth JB 2.1 RC1
and walaaa....
my phone is up and running again...

Galaxy Note 2 (GT-N7100)
Hi Everyone!
I Just downloaded apps that can switch internal sd card to external sd card and I have to update the kernel and when I reboot my phone it didn't start up and end up my phone don't work..pls help, i'm not good when it comes to technology..
thank you and Godbless!!

[Q] Stuck at Samsung logo (No root, no recovery)

So I had an I747 with ATT running on SuperNexus (d2att Build 4), and I tried to flash to the latest ATT Lean Kernel. Cleared cache/dalvik, flashed, and rebooted. Phone would boot to the Samsung logo and shut down, whereas it used to load a Nexus boot animation afterwards (at least I think it shut down, the screen would be black and not do anything). I couldn't enter recovery at that point, and without a backup I just went ahead and flashed stock image with Odin without being able to reset to factory or clear the caches. Needless to say, I'm now unrooted with no custom recovery, and now the Samsung logo hangs after going through the animation, just glowing. I still can't get into recovery (it shows the initial Samsung screen saying it's going into recovery, but then reboots), but I can get into download mode. Not really sure what to do. I've got a job on the line, and I need to just get it in working order. I'd appreciate any help!
EDIT: Flashed TWRP with Odin successfully, can enter Recovery. Wiped cache/Dalvik and factory reset. Reboot. Phone goes through Samsung animation and ATT animation, and then hangs at glowing Samsung logo. Still don't know what to do.

Gnarled said:
So I had an I747 with ATT running on SuperNexus (d2att Build 4), and I tried to flash to the latest ATT Lean Kernel. Cleared cache/dalvik, flashed, and rebooted. Phone would boot to the Samsung logo and shut down, whereas it used to load a Nexus boot animation afterwards (at least I think it shut down, the screen would be black and not do anything). I couldn't enter recovery at that point, and without a backup I just went ahead and flashed stock image with Odin without being able to reset to factory or clear the caches. Needless to say, I'm now unrooted with no custom recovery, and now the Samsung logo hangs after going through the animation, just glowing. I still can't get into recovery (it shows the initial Samsung screen saying it's going into recovery, but then reboots), but I can get into download mode. Not really sure what to do. I've got a job on the line, and I need to just get it in working order. I'd appreciate any help!
EDIT: Flashed TWRP with Odin successfully, can enter Recovery. Wiped cache/Dalvik and factory reset. Reboot. Phone goes through Samsung animation and ATT animation, and then hangs at glowing Samsung logo. Still don't know what to do.
Click to expand...
Click to collapse
Can you load a rom and kernel on a SD card and flash it ? Are you still unable to get into download mode ?
If you cant load a rom on an sd card then try download mode and just flash this : http://forum.xda-developers.com/showthread.php?t=1739426
in odin. It will reroot you and you can go from there.

if you're able to use the above attached link to get your device up and going again (with root), you'll have to install a custom recovery again. not a big deal, just didnt want you to boot into recovery to flash something and find yourself in stock vs custom recovery. cheers!

[Q] Galaxy grand i9082 not booting into recovery mode and factory reset not working

Hii guys i have rooted my Galaxy grand i9082 with CWM using Odin and it's been working fine for few days but now i am trying to install AOGP Based Custom ROM i am getting following issues
1. Tried to boot into recovery using key combination Volume Up + Home Button + power Button but it is not at all going into recovery mode just (Grand i9082 Boot Logo Blinking for few seconds and then phone is starting as usual normal boot)
2.Tried to Reset the Device from setttings -> Backup and Reset -> Erase Everthing -> Delete all button does nothing
also tried to boot through commands ./adb reboot recovery
installed rom manager and selected boot into recovery still it is booting into normal mode
I am using stock jellybean 4.2.2 version and CWM flashed through Odin

saivvit said:
Hii guys i have rooted my Galaxy grand i9082 with CWM using Odin and it's been working fine for few days but now i am trying to install AOGP Based Custom ROM i am getting following issues
1. Tried to boot into recovery using key combination Volume Up + Home Button + power Button but it is not at all going into recovery mode just (Grand i9082 Boot Logo Blinking for few seconds and then phone is starting as usual normal boot)
2.Tried to Reset the Device from setttings -> Backup and Reset -> Erase Everthing -> Delete all button does nothing
also tried to boot through commands ./adb reboot recovery
installed rom manager and selected boot into recovery still it is booting into normal mode
I am using stock jellybean 4.2.2 version and CWM flashed through Odin
Click to expand...
Click to collapse
Try To Install The Stock Rom Again
And Then Try Again
GOod Luck :highfive::highfive:

saivvit said:
Hii guys i have rooted my Galaxy grand i9082 with CWM using Odin and it's been working fine for few days but now i am trying to install AOGP Based Custom ROM i am getting following issues
1. Tried to boot into recovery using key combination Volume Up + Home Button + power Button but it is not at all going into recovery mode just (Grand i9082 Boot Logo Blinking for few seconds and then phone is starting as usual normal boot)
2.Tried to Reset the Device from setttings -> Backup and Reset -> Erase Everthing -> Delete all button does nothing
also tried to boot through commands ./adb reboot recovery
installed rom manager and selected boot into recovery still it is booting into normal mode
I am using stock jellybean 4.2.2 version and CWM flashed through Odin
Click to expand...
Click to collapse
Since you are ready to reset your phone(assuming you have backed up everything), you can try
1.Booting to recovery with phone turned off by the 3 combination keys(lol, read that somewhere off internet) and not just directly.
2.Flashing 4.2.2 again(from sammobile.com) or some other trusted site. And reflashing cwm recovery.
3.Try rooting it ?
4.Try intalling some app like GooManager from playstore to try to enter recovery mode.
May i know which recovery file you flashed? Flashing a more newer/alternative recovery may help.

Did you manage to fix this. Same thing happening to me.. Flashing recovery from Odin does not work.. Factory reset does not work either. Tried to enter recovery mode.. That does not work as well.. In all everything results in normal boot..
Can any one help?

Rahulraz24 said:
Did you manage to fix this. Same thing happening to me.. Flashing recovery from Odin does not work.. Factory reset does not work either. Tried to enter recovery mode.. That does not work as well.. In all everything results in normal boot..
Can any one help?
Click to expand...
Click to collapse
i have observed that u need to do factory reset after flashing a rom.
1. flash stock rom, i would highly recommend using android v4.1.2 because 4.2. of i9082 is little buggy. link to stock rom- http://www.sammobile.com/firmwares/database/GT-I9082/
2. After first boot, do a FACTORY RESET either through settings or using stock 3e recovery, both works
3. flash twrp 2.8.6, via odin, (DO NOT RENAME THE .TAR FILE) link to recovery- https://twrp.me/devices/samsunggalaxygrandduos.html
I have tested this recovery on i9082
if i helped you someway, HIT 'THANKS' button

saivvit said:
Hii guys i have rooted my Galaxy grand i9082 with CWM using Odin and it's been working fine for few days but now i am trying to install AOGP Based Custom ROM i am getting following issues
1. Tried to boot into recovery using key combination Volume Up + Home Button + power Button but it is not at all going into recovery mode just (Grand i9082 Boot Logo Blinking for few seconds and then phone is starting as usual normal boot)
2.Tried to Reset the Device from setttings -> Backup and Reset -> Erase Everthing -> Delete all button does nothing
also tried to boot through commands ./adb reboot recovery
installed rom manager and selected boot into recovery still it is booting into normal mode
I am using stock jellybean 4.2.2 version and CWM flashed through Odin
Click to expand...
Click to collapse
Download Odin and PhilZ recovery/kernel for i9082. Flash kernel/recovery via Odin (you must be in download mode, use Volume Down + Home Button + Power Button combo for this) and you should have recovery. After this, you can flash any other recovery/rom if you want.
P.S. Don't forget to do Nandroid Backup.

DroidTwe4kz said:
Download Odin and PhilZ recovery/kernel for i9082. Flash kernel/recovery via Odin (you must be in download mode, use Volume Down + Home Button + Power Button combo for this) and you should have recovery. After this, you can flash any other recovery/rom if you want.
P.S. Don't forget to do Nandroid Backup.
Click to expand...
Click to collapse
Flashing Recovery again with Odin.
Don't tick the 'Auto reboot' and hit start button.
Wait until it shows pass messages.
Disconnect device from PC.
Remove battery and insert after 5 secs.
Press 'Volume Up+Home+Power'.
Thats it!!
Sent from my Sparkle V using XDA Forums

Rizan Mohammed said:
Flashing Recovery again with Odin.
Don't tick the 'Auto reboot' and hit start button.
Wait until it shows pass messages.
Disconnect device from PC.
Remove battery and insert after 5 secs.
Press 'Volume Up+Home+Power'.
Thats it!!
Sent from my Sparkle V using XDA Forums
Click to expand...
Click to collapse
I thought OP knew how to flash via Odin. Thanks for tutorial

Galaxy tab 3 7.0 SM-T210 does not boot into ROM

Hi all,
I've tried to install costum ROM ( unofficial CM 11 http://forum.xda-developers.com/showthread.php?t=2783617 ) with recovery PhilZ Touch 6.44.9. I did all the steps and it worked perfectly. But it has some bugs with the screen lock (when charging the screen becomes black but still lightened, also with wifi bug). I tried to reboot into recovery from the ROM (into the power menu, pressing restart -> reboot into recovery) and then the tablet won't restart. just the download mode works, else the tablet shut down just after writing "GALAXY TAB 3 " into the screen. So i've re installed the recovery PhilZ touch 6, which works and i've tried to restore the backup i've done before the "crash", but after that the tablet boot into recovery. I've tried intalling a new rom also the result (the Tablet boot into recovery).
Help please

Has your Recovery The KK extension?
Which was your OS Version before you install CM, KK4.4.x Stock?

FLASH UR TAB AN OFFICIAL FIRMWARE AND RE ROOT IT. YOU CAN GET UR FIRMWARE FROM SAM MOBILES SITE.
FLASH USING ODIN.
CHEERS!
Sent from my GT-I9500 using XDA Free mobile app