G3 doesn't recognize some of my chargers - G3 Q&A, Help & Troubleshooting

Just got the G3 on Monday and immediately am having some trouble. When I plugged it into my car charger it didn't recognize that it was plugged in. If I plug it into some other chargers I have at home it also doesn't recognize that it's plugged in. If I use the charger that came with it it works fine. If I use one of my portable battery charger things that also works fine.
Is there something with this phone that it doesn't recognize that it's plugged in unless it receives a certain amount of power coming in or something like that? I know some of my car chargers are under powered but they work with my GS3 and GS5 just fine. They just take longer to charge up.
If I need to get better car chargers I will but just wanted to see if this is a known issue or not.
Thanks!

Related

USB not powerful enough to charge?

Anyone else having this problem. When I have my TMOUS TP2 hooked up to USB I keep getting told it's not getting enough power to charge.
Interesting. Is the USB plugged into a USB hub or straight into a computer? I can charge mine via USB when its straight into the computer. I'll try with hub a second to see if there is a difference.
Edit-
No, I cant. When plugged into a 4-port USB hub, I also cannot charge. I'm using some generic nonsense hub, dunno if a higher quality one (or one that also plugs into the wall for juice) might make a difference
Yes!
Many laptops are not powerful enough to charge the TP2. Also many hubs will divide the power between the ports.
A standard USB port will give you about 1A and the above mentioned gives you typically less than 1/2A.
Putting TP2 in standby will help if on a weak port, but that makes no sense, cause then you can use the charger.
It's directly in to my PC.. weird.
I got the "not enough power" USB warning when plugged into my laptop...but not right away -- it had been plugged in for 30-60 minutes or so.
I have not received that warning when plugged into the USB port of a full-power-desktop PC, even when plugged in for hours.
I try to remember to bring the ac adapter that came with my TP2 when I'm going to be away from home for a while so I don't have to depend on USB-power from a computer.
I charged off a 0.5A power source (the most you'll get out of a standard USB port), but the device was turned off. Took about 3.5 hours to fully charge it.
Did you have anything like wifi, gps, etc turned on at the time?
how much power is left on the phone? IIRC, if its too low, your phone will not charge through USB & you need the AC adapter.
There are "powered" and "unpowered" USB ports. The "unpowered" ones just basically carry enough current to carry signals, but not actually power a device. The "powered" ones carry enough current to charge a device.
Many laptops are "unpowered" ports, although I think that trend is changing. Most desktops I would assume are "powered".
I personally only power my phone on one of two official chargers I have, although if I'm in the car I'll use a third party adaptor there.
I don't know if the TP2 is any different than the Tilt in regards to charging, but I'd assume very similar.... Perhaps I'll have the TP2 soon, I've finally gotten ATT to let me have an early upgrade but haven't found the actual phone yet.
I have a 5v 1A car charger. When in the car if I am using Pocket Player, and my GPS program at the same time I will get the message that:
"there is not enough current to properly charge the device. Please should shut down unneeded programs." or something like that...
And sure enough, my phone will die if left like this. It won't charge, even though it shows that it is... curious.
Could it be the cable is not allowing enough current? I am using an older cable in the car, as I have my TP2 supplied cable on my computer....I am going to try swapping these 2 cables tomorrow and see what happens.
I've had my Sprint TP2 for 12 days now and experienced this problem once. I was plugged directly to my PC via the USB port. I believe my battery was at about 30% so I disconnected it and used the travel charger for awhile and plugged it back into the PC USB port. So far that's the only time it's happened.
Might be the cable!
cameraddict said:
Could it be the cable is not allowing enough current? I am using an older cable in the car, as I have my TP2 supplied cable on my computer....I am going to try swapping these 2 cables tomorrow and see what happens.
Click to expand...
Click to collapse
Hello,
I had exactly the same problem and found out it WAS the USB cable - the one used couldn't offer more than 300mA to the phone, even if connected to orriginal HTC AC adapter. After changing the cable, the 1A car charger gives the same mA as the AC adapter (checked with nuePower - http://www.nuerom.com/BlogEngine/page/nuePowernueBattery.aspx)
Radu
nradu:
Thanks for the info.. I haven't driven anywhere since I posted that! I will be in the next day or so... glad to know the answer is simple.
I too, just downloaded the NuePower program. Will be installing this as well. Did you by chance have the chainfire 1% battery cab installed? If so, did you unistall it first? Wondering if there will be a conflict between the 2.
cameraddict said:
Did you by chance have the chainfire 1% battery cab installed? If so, did you unistall it first? Wondering if there will be a conflict between the 2.
Click to expand...
Click to collapse
Hi,
Yes, I have chainfire's cab, I didn't uninstall it before installing NuePower (btw, I have tried once to uninstall it and after a soft reset, the 1% info was still there). the only bug I saw was when pressing the OK button in NuePower - sometimes phone hungs or runs very very slowly. Best is to use it only to test the cables and uninstall it. and don't press OK button, just minimize it with End Key or do a soft reset if handy.
Mine does the same thing lol
I get the same thing, i think they should make these devices use even more power.
Don't know if will help, but last night I was in my car using Live Search for GPS purposes. The battery was low on the phone, so I plugged it in. The phone told me that the source was not strong enough to charge the phone and to try shutting down some apps. I assumed that it was because the GPS was still active, although I really don't know because I didn't bother testing that theory, as I was just around the corner from my house. (No jokes about using the GPS to get home, please. )
Anyway, when I got home, I plugged into my laptop (which was running on AC power) using the cable that came with my XV6800. Note that the cable is always connected to my laptop via a cheap USB hub. I experienced no problems.

[Q] att zero charger problems

anyone having problems with theirs? when I plug in my phone it slows down and is almost unresponsive. if I plug the micro USB cable that came with my phone into this charger it thinks it is plugged into the computer. it says it is a 1A charger so I don't know what the problem is. I am definitely sending it back but wasn't sure if I should order another. I only paid 20 bucks for the charger, cable, and car charger through att but wondering if I should just order the blackberry chargers off Amazon for cheaper.
I also have the same issue..
jonsudra said:
anyone having problems with theirs? when I plug in my phone it slows down and is almost unresponsive. if I plug the micro USB cable that came with my phone into this charger it thinks it is plugged into the computer. it says it is a 1A charger so I don't know what the problem is. I am definitely sending it back but wasn't sure if I should order another. I only paid 20 bucks for the charger, cable, and car charger through att but wondering if I should just order the blackberry chargers off Amazon for cheaper.
Click to expand...
Click to collapse
Hi,
I also have the same issue. Did anyone has any resolution or should I return the charger?
Thanks
Not sure if it was the same charger, but I had to return one I got from AT&T a couple days later as the touchscreen stopped responding properly while it was connected. Swipe would jump all around and it couldn't track my finger correctly. No issues with the stock charger and cable or any generic cables plugged into iPhone converters since.
Ok just checked the AT&T site, it was the Zero charger. That thing is junk.

I got the evo hdmi dock that sprint sells today, not really charging.

The light comes on most of the time but it still doesnt really seem to be charging it. Any idea what's up?
Swap the USB cable and use the one that came with your phone. Lots of times the USB cables are the culprit.
Don't have the one that came with my phone but I've tried a few different cables
Sent from my PC36100 using xda premium
Is the phone active during the charging time and does the phone charge normally without the dock? I've noticed that with my stock sprint EVO car dock plugged in, when used to navigate (GPS), screen on and perhaps playing music through the aux connection, the phone only holds its own. Won't fully charge, but won't discharge either and if I turn off the screen or spotify, the phone will charge, just slowly.
As the USB cable plugs into the dock, not the phone when it's mounted, removing the phone and plugging in directly has the phone charge normally.
patass, can I get a link for the dock? Sounds interesting, I might try it myself as I have the cable that came w/ my phone.

Phone doesn't know it's plugged in.

When the phone is off and plugged into the wall, it charges. When the phone is on, and I plug it into the wall or computer, the phone doesn't know it's plugged in.
I ordered a brand new usb charging flex jack and replaced the old one, still the same problem. What gives?
EDIT: I am stock. Not rooted.
Does this happen on the original cable also?
Have you tried wiping?
Is Fast Charge on?
Fk. It doesn't even charge from the wall! When the phone is off, it has the animation that says it's charging when i plug it in the wall. I left it plugged into the wall overnight. This morning I took a look at the phone, and it didn't charge!
Oh noez, what should i do?
Also, I don't have the original cable. I'm using an HTC one.
EDIT: Dafuq?! I found an LG charger. Apparently the phone knows that it's charging when I charge with that. The thing is, that charger is just a charger; it's not a usb cable+ an adaptor. So I can't use it for adb and such.
What is Fast Charge?
convolution said:
Fk. It doesn't even charge from the wall! When the phone is off, it has the animation that says it's charging when i plug it in the wall. I left it plugged into the wall overnight. This morning I took a look at the phone, and it didn't charge!
Oh noez, what should i do?
Also, I don't have the original cable. I'm using an HTC one.
EDIT: Dafuq?! I found an LG charger. Apparently the phone knows that it's charging when I charge with that. The thing is, that charger is just a charger; it's not a usb cable+ an adaptor. So I can't use it for adb and such.
What is Fast Charge?
Click to expand...
Click to collapse
You should mention what ROM you're on (and version) so that no one else makes the same mistake I did in assuming you had a custom ROM and that Fast Charge is on. It's a feature that makes sure that whatever charges it is recognised as AC 1amp charger as some chargers aren't designed well enough (I believe it involves a single solder point) to report themselves as capable of 1A. If it doesn't report as AC to Android, it will charge at 500mA instead (it assumes USB power). It sometimes causes problems with connecting to PC via USB.
Get another USB cable, this time none of that fancy **** go straight to OE Samsung or something.
=O I thot all usb cables are made equal! So I can't use an HTC usb cable? The dude didn't sell me the phone with a cable T.T
Also, I'm stock. I am not even rooted.
My nexus just started acting stupid when I plug it in also.
Mine sat in a drawer for a few weeks and when I plugged it in to charge, it wouldn't.
What I did was this.
plug device into charger
remove battery for a few seconds
replace battery
press power button
phone powered up and began charging.
Even now, it still sometimes doesn't recognize the charger and I have to unplug and plug it in until it does.
I use a rocketfish cable.
convolution said:
=O I thot all usb cables are made equal! So I can't use an HTC usb cable? The dude didn't sell me the phone with a cable T.T
Also, I'm stock. I am not even rooted.
Click to expand...
Click to collapse
Some devices are picky, you'd think that all USB cables are made equal (I did too) but some just don't work well with certain devices. I've had printers th... wait printers always have **** problems... I've had uh... usb extensions not work well with some Wifi dongles and such. My old milestone didn't like the Samsung cable either (yet the Moto cable works perfectly on gnex)
=O. Then it has to be the usb cable! No way it's not!
I ordered one on ebay =D
Rooted Gnex here I come!
dmappdev said:
My nexus just started acting stupid when I plug it in also.
Mine sat in a drawer for a few weeks and when I plugged it in to charge, it wouldn't.
What I did was this.
plug device into charger
remove battery for a few seconds
replace battery
press power button
phone powered up and began charging.
Even now, it still sometimes doesn't recognize the charger and I have to unplug and plug it in until it does.
I use a rocketfish cable.
Click to expand...
Click to collapse
Thank you dmappdev,
I followed your procedure (feel like talking about surgery here, which isn't too far from topic); I'm convinced that it helped in some way, directly or indirectly... as at first, my Galaxy S Advance still wouldn't recognize/charge my phone with:
1. its own charger,
2. my old Galaxy Ace's charger,
3. a universal wall usb plug used with the S Advanced own USB-to-USBmini cable.
My last idea was to use, quote: an old Nokia USB cable connected to my PC... and that worked.
I was much too happy my phone had remembered how to charge to stay mad... But I still tried those three means for charging again, and only the phone's original charger worked now. So the phone's charging ability has been "awakened" in some way, but only for the original charger ...technology is improving, but not the ethics on making life easier for the consumer.
All this was yesterday. This morning (there's more, yes), I saw my phone indicating a 100% charge although it had been disconnected from charge for several hours - something that had already happened once yesterday, before the unable-to-charge situation; a simple reboot took care of the problem, the battery status now showing a more realistic 53%.
Any comments to any of the above? If not, thanks again for your tip anyway !!!

Car Dock Stopped Working

I have been using the official car dock since it came out at it has worked great.
Yesterday my phone wouldn't go into dock mode when insert, It also didn't charge.
Because I was at critical battery level I tried plugging my phone straight into the charger and it still didn't charge.
I assumed my cigarette lighter fuse had blown so I replaced that. Dock and charger still didn't work.
Tried a different charger. It worked going straight into the phone.
Plugged the charger into the dock and still cant get my phone connected to it.
Did something fry my charger and dock?
Any suggestions on how to get it working?

Categories

Resources