Develop Bugs

[Q] Note 3 towelroot not working

Hello all.
So I've tried the towelroot method on my Tmobile Note 3 running 4.4.2 a total of three times with no luck according to RootChecker. I have SuperUser installed via a Reddit posters suggestion, but I am at a loss at to why root isn't working. Does anybody have any ideas?

Make sure that you are on baseband version DNE6, otherwise it won't work. I did it yesterday and it worked quickly and painlessly. If you are not, you need to upgrade first, then root.

Root
Eudeferrer said:
Make sure that you are on baseband version DNE6, otherwise it won't work. I did it yesterday and it worked quickly and painlessly. If you are not, you need to upgrade first, then root.
Click to expand...
Click to collapse
Thanks for the help man. I went ahead and updated to the NE6 firmware via Kies, then tried Towelroot again. Still no go. I did download SuperSU per reddit suggestion, but it keeps giving an error about binaries. Could this be the culprit? Keep in mind I am pretty much a noob, but learn fast

Dont install it from the google play store. You have to download supersu from this link: Download
Check out this video that shows you how.
http://youtu.be/S_wYMmZipcU

[Q] lg g3 beat d722k lollipop root?

Anyone successful rooted g3s(beat) d722k lollipop (android 5.0)?

Temproot
Hi, i used LG One Click root and King root. Both work but when you reboot your device, the root access is removed. It might help but .............
For ino, i have a LG G3S D722K 5.0.2

New Method
Hi. Found that link:
http://forum.xda-developers.com/lg-g3/general/guide-root-method-lg-devices-t3129197
Seems it can be done manually, i'm going to try it and hope it works.

Kingroot
In case anyone still can't find a solution. I found only Kingroot would work with my device.
http://forum.xda-developers.com/devdb/project/dl/?id=12586
I previously used purpledrake fine on kitkat, but i tried that, lg oneclick, towel root and another one and couldn't find anything to give me a perm root.
The only downside is you need to use Kinguser, instead on superSU or superuser. I know there is a workaround that just didn't work for me.
Now I just have an Xposed incompatibility issue to look into...

dirtm said:
In case anyone still can't find a solution. I found only Kingroot would work with my device.
http://forum.xda-developers.com/devdb/project/dl/?id=12586
I previously used purpledrake fine on kitkat, but i tried that, lg oneclick, towel root and another one and couldn't find anything to give me a perm root.
The only downside is you need to use Kinguser, instead on superSU or superuser. I know there is a workaround that just didn't work for me.
Now I just have an Xposed incompatibility issue to look into...
Click to expand...
Click to collapse
My Device : LG D722 Running Android 5.0.2
Kingroot worked for me. Installed APK, run it... allowed to root, banggggg... rooted !!!
as simple as it, we don't even need a pc to do that ? man, thats cool
Just to checked root access after a restart, it was successfully rooted
Thanks

GaelSouris said:
Hi, i used LG One Click root and King root. Both work but when you reboot your device, the root access is removed. It might help but .............
For ino, i have a LG G3S D722K 5.0.2
Click to expand...
Click to collapse
the same problem...

Issue with lg g3 beat with lolip 5.0.2
Hello, i rooted with LG One Click (http://forum.xda-developers.com/lg-g3/general/lg-g3s-beat-d722-thread-t3110048). Root Checker says:
ROOT ACCESS: Device rooted
SUPER USER: SU FOUND
BUSY BOX: Busy box not installed
and path information, i guess for su
The issue is i can't do nothing else:
Installed supersu but don't update binaries.
And any app that ask for root access do not have it.
Preciate some help (newbi in rooting and so...).
Thank you

how safe is kingroot ?

So, I just bothered lot couple of ppl here but still have some questions and prefer more answers. I have the z1 compact with android 5.0.2 and .270, I can update but I prefer to wait
1- Principal, how safe is to root with kingroot ?
2-If root goes wrong, can undo everything and back to normal ?
3-Just root my phone and use is as I did before root, what changes ? Its same phone just rooted ?
4- Should use kingroot from pc or phone ?
thank you and sorry my english

JIJOK said:
So, I just bothered lot couple of ppl here but still have some questions and prefer more answers. I have the z1 compact with android 5.0.2 and .270, I can update but I prefer to wait
1- Principal, how safe is to root with kingroot ?
2-If root goes wrong, can undo everything and back to normal ?
3-Just root my phone and use is as I did before root, what changes ? Its same phone just rooted ?
4- Should use kingroot from pc or phone ?
thank you and sorry my english
Click to expand...
Click to collapse
Just follow the instructions on the Kingroot page, just download the .apk and install it.
Your phone will be exactly the same, the only difference is that you will be able to install and run 'root' applications. This is like being administrator of a computer, you can install and run anything.
If kingroot is unable to unlock your phone it will tell you before it starts, it has a table that it uses to look up phone models/firmware, if it's not on the list then it doesn't attempt it.
You can always repair your phone with Sony PC Companion, whatever the condition.
You might want to install superSU once Kingroot is installed, but again, follow the instructions on the thread and it will be easy.

Auto update disabled
Hello,
Xperia Z Ultra 14.6.A.1.236
Kingroot 4.6.2
I noticed that Kingroot (autoupdate disabled) is still trying to connect to chinese servers as soon as i have internet access. Eight IP addresses just to check for new version? Strange, isn't it?
I dont know how to verify what kind of connection Kingroot is trying to establish. Does any one know if it is just for update check or to send data from cell to chinese servers.
Logs from Firewall:
--------
AppID : 10205
Application's Name: KingRoot
Total Packets Blocked: 67
[TCP]103.7.30.157:80(6)
[TCP]163.177.74.142:80(10)
[TCP]163.177.66.11:80(8)
[TCP]103.7.30.158:80(6)
[TCP]103.7.30.156:80(6)
[TCP]163.177.67.190:80(15)
[TCP]163.177.67.188:80(8)
[TCP]163.177.67.189:80(8)
---------
That is what I am getting wjen whois:
(can not paste links yet. I used who_is to check on these ip numbers
I know that Kingroot is sending some data during installation "to find the best way to root your devicew". But why it is trying to connect so hard after root is already obtained?
Thanks.for.your help guys.

SteFANdyVAN said:
Hello,
Xperia Z Ultra 14.6.A.1.236
Kingroot 4.6.2
I noticed that Kingroot (autoupdate disabled) is still trying to connect to chinese servers as soon as i have internet access. Eight IP addresses just to check for new version? Strange, isn't it?
I dont know how to verify what kind of connection Kingroot is trying to establish. Does any one know if it is just for update check or to send data from cell to chinese servers.
Logs from Firewall:
--------
AppID : 10205
Application's Name: KingRoot
Total Packets Blocked: 67
[TCP]103.7.30.157:80(6)
[TCP]163.177.74.142:80(10)
[TCP]163.177.66.11:80(8)
[TCP]103.7.30.158:80(6)
[TCP]103.7.30.156:80(6)
[TCP]163.177.67.190:80(15)
[TCP]163.177.67.188:80(8)
[TCP]163.177.67.189:80(8)
---------
That is what I am getting wjen whois:
(can not paste links yet. I used who_is to check on these ip numbers
I know that Kingroot is sending some data during installation "to find the best way to root your devicew". But why it is trying to connect so hard after root is already obtained?
Thanks.for.your help guys.
Click to expand...
Click to collapse
If you don't trust Kingroot, you can change Kingroot to su - http://forum.xda-developers.com/showpost.php?p=65004634&postcount=2 or you can wipe everything and just flash supersu via recovery - https://download.chainfire.eu/696/SuperSU/

[Root]AT&T Galaxy Tab 3 7.0 (SM-T217A) Root w/ Super Su by chainfire

This is a method to obtain working root & Super Su by chainfire with up-to-date binaries for the
AT&T Variant of the Samsung Galaxy Tab 3 7.0 (SM-T217A) on 4.4.2
Let me make very clear, I did not develop these apps!
This is just a method I found after searching & some trial and error.
I thought it may be helpful if it were available here on the forums.
I spent too long looking for a method that still worked on an OTA up-to-date device etc.
Nobody bothers for an old device with a locked bootloader. :crying:
I'm sure everyone that has had or currently has this model knows that Kingo Root works (at least for partial root), and a big thanks to them for their effort & hard work.
But if you're like me, you want the freedom to use Super Su or any of the other available options out there for managing permissions.
Either way, thanks to Kingo for a temporary solution.
And thanks to gatesjunior you can have your freedom of choice back.
(Although I highly recommend that you use the version found at the bottom of the post, because the newer version I tried stalled at the 1st stage.)
If this method ends up working for you I think it would be worth the $3.99 to support the developer by purchasing his app!
(If you feel adventurous you can attempt using the google play store release, but I had no such luck.)
I had originally tried to use Super Sume version 6.5 with Kingo Root but, it just ended up losing my root access and I had to re-root my device.
Yesterday I attempted to run Super Sume v. 9.2.6 I believe, but for some reason it didn't recognize it Kingo, or Kingroot as being installed on my device.
So I ended up uninstalling it and trying an older version I had read worked, and it succeeded!​
Instructions for obtaining Root & Migrating over to Super Su are as follows.
If you are currently rooted using Kingo Root, un-root from within the Kingo app 'Superuser' and proceed to uninstall the rest of their apps..
Install & run Kingroot 4.5; When this is finished, restart your phone and run an app to verify you have root. (I use the free version of Root Checker.)
This may not be necessary but at this point I re-installed Busybox.
Install & run Super Sume v6.7
Restart & Verify Root!
:fingers-crossed: Success! :highfive:
If for some reason your device failed to achieve root using Kingroot after removal of Kingoroot; you may have better luck leaving your device rooted with all the Kingo Root apps installed until after you install Kingroot.
(Although I'm sure most people would advise against it, I actually skipped the un-root/un-installation procedure until after I had installed Kingroot 4.5 because I my battery was at 9%)
Honestly it shouldn't really matter though Super Sume is supposed to remove everything like that anyways
Required APK's can be found below.
4/12/23-Edit: Replaced broken links with working ones from my google drive.
Kingroot 4.5.apk
Super Sume 6.7.apk
7z archive incase drive has false-positives: here password: xda​

Thanks for your efforts!!
Hi, I would really like to appreciate your efforts for this but the links you gave at the end are not working so I am unable to even try your given method.
Thank You!!

Fixed Broken Links
SteeleRocky said:
Hi, I would really like to appreciate your efforts for this but the links you gave at the end are not working so I am unable to even try your given method.
Thank You!!
Click to expand...
Click to collapse
Sorry about that, I went ahead and put them on my google drive. Let me know if it works out for you.

Fyi, this method worked for me on a sprint sm-t217s galaxy tab 3 7.0 running kitkat 4.4.2 baseband OH1..

The:Dude said:
Fyi, this method worked for me on a sprint sm-t217s galaxy tab 3 7.0 running kitkat 4.4.2 baseband OH1..
Click to expand...
Click to collapse
Glad to hear it!
I figured it would probably work on all the Samsung Galaxy Tab 3 7.0 variants but I only have the AT&T model.
If you don't want to flash your system(or can't in my case) this is probably the next best thing.

Worked for me on my AT&T SM-T217A on 4.4.2 T217AUCUCNI1 & T217AUCUCNI2
Thank you!

sixn3is7 said:
Worked for me on my AT&T SM-T217A. Thank you.
Click to expand...
Click to collapse
You are most welcome. :victory:
Enjoy!

Got hit with a infected file warning.

Try this archive instead, password is xda.
https://drive.google.com/file/d/0ByBY1FxjHZd2WnlHMEVVTzB1VXc/view?usp=drivesdk

Let me know if updated link works, otherwise... I will update OP when I get home.

I know this thread is quite old but it helped me get back on track thanks to r4e_hafintosh and his great instructions. I am working with a Galaxy 3 7.0 SM-T217A (AT&T) version. Wasn't working right so I did a full reset. Tried to get TWRP installed and things went to hell quickly. Biggest problem then was finding a stock 4.2.2 and/or 4.4.2. I finally located both here: https://androidfilehost.com/?w=search&s=T217A so I was able to use the repair files and get back to stock 4.4.2. Then I followed instructions from r4e_hafintosh to get KingRoot installed along with BusyBox. I'm currently waiting for SuperSUMe to install and it appears I'm back on track. Thanks to r4e_hafintosh, the unknown person who posted the repair files and everyone who has posted at XDA and other Android sites that allowed me to finally hunt down what I needed. Probably a small victory for those much more well versed in customizing ROMs but I big win for me. Hopefully the next person trying to find stock files for the AT&T SM-T217A will find this post as well. Thanks all!

How can we unlock bootloader for it

how to HTC Desire 526 temp root without pc

*Update*
Make sure you go into Settings/App Manager and Disable all Verizons App except the Mobile login and My Verizon Mobile app.
Easy way to do is type in the search for vzw,disable all of vzw apps. Then search for Verizon and disable all of Verizons related app except the two mentioned.Verizons bloatware seem to be the problem that prevents us to get tempt root.
****
1.Download KingRoot app and install it
2.Run the app, it will show theres no root method availabe,still try to root it anyways.
3. As soon as the rooting starts(percentage page going up) hit the home key so the app will run in the background.eek:therwise rooting will not work.
4.Wait for 2 minutes then click on the KingApp again, it might take a few tries and voila! Temp root.:laugh:
*Note*
1.make sure you have usb debugging enabled in Developer Option:good:
2.Bootloader is still locked so you will lose your root after any reboot.Sunshine is not sucessful in unlocking it rightnow.Maybe if we have a boot.img thats already unlocked we can flash it with Flashify app.:crying:
3. All root app works great, just cant modify any system files cause of temp root.

Htc 526 root?!?
tonismo said:
1.Download KingRoot app and install it
2.Run the app, it will show theres no root method availabe,still try to root it anyways.
3. As soon as the rooting starts(percentage page going up) hit the home key so the app will run in the background.eek:therwise rooting will not work.
4.Wait for 2 minutes then click on the KingApp again, it might take a few tries and voila! Temp root.:laugh:
*Note*
1.make sure you have usb debugging enabled in Developer Option:good:
2.Bootloader is still locked so you will lose your root after any reboot.Sunshine is not sucessful in unlocking it rightnow.Maybe if we have a boot.img thats already unlocked we can flash it with Flashify app.:crying:
3. All root app works great, just cant modify any system files cause of temp root.
Click to expand...
Click to collapse
Okay so the temp root can do what? Will root worthy apps detect the root and work up until a reboot??? if that's the case then the painfully annoying time spent to "re-temp root" the phone will be enough for me until KingRoot finds a way to successfully root the phone. :good:

If you get me temp root I can get perm root.
This temp root method isn't working for me

You have to keep doing it a few time.Im doing this even with the StageFright update. Once you get it the first time, everytime after that will work.It seems like Kingroot remember its exploit. Temp root will let you do things like running GameGuardian to cheat android games. Basically thats all I use tempt root for.
*Note*
Remember to run Kingroot rooting process in the backgroun only. Otherwise it will not work. As soon as you hit the root method, hit the homekey. Go use your phone as normal and then come back to the app,voila tempt root. It will ask you to fix the root binaries ,which means it works.

I also have full root but resets on reboot...

I'm not 100% sure but if the root resets after reboot then it's a temp root right?

Yeah. It's annoying.. I'd love to mod a little but it's been years since I dabbled. Full root would be fantastic. I've been looking for a solid solution that preferably doesn't require any help from a PC..

Hey Can u do and update on it because it's one work now in 2018

tonismo said:
*Update*
Make sure you go into Settings/App Manager and Disable all Verizons App except the Mobile login and My Verizon Mobile app.
Easy way to do is type in the search for vzw,disable all of vzw apps. Then search for Verizon and disable all of Verizons related app except the two mentioned.Verizons bloatware seem to be the problem that prevents us to get tempt root.
****
1.Download KingRoot app and install it
2.Run the app, it will show theres no root method availabe,still try to root it anyways.
3. As soon as the rooting starts(percentage page going up) hit the home key so the app will run in the background.eek:therwise rooting will not work.
4.Wait for 2 minutes then click on the KingApp again, it might take a few tries and voila! Temp root.:laugh:
*Note*
1.make sure you have usb debugging enabled in Developer Option:good:
2.Bootloader is still locked so you will lose your root after any reboot.Sunshine is not sucessful in unlocking it rightnow.Maybe if we have a boot.img thats already unlocked we can flash it with Flashify app.:crying:
3. All root app works great, just cant modify any system files cause of temp root.
Click to expand...
Click to collapse
Hey! actually i found that kingroot 4.8.2 works but i only got it to work once, when you did this what version of kingroot did you use?

.

.