Develop Bugs

[Q] CWM Problem

Hi there, just bought a new N7100 and because I'm using Linux mint I decided to root my phone using Exynos Abuse and to be honest this was really simple....Then I installed ROM Mnnager, and set up CWM recovery from within ROM Manager. Now then, CWM has installed but whenever I try to reboot into CWM I just get stock recovery....
Is there a simple method to resolve this problem????
Thank you in advance

Delete the file named recovery restore.p or something via root explorer.
Sent from my GT-N7100

UtkarshGupta said:
Delete the file named recovery restore.p or something via root explorer.
Sent from my GT-N7100
Click to expand...
Click to collapse
Thank you for your quick reply however I cant locate this 'recovery restore.p' to delete it. I've tried looking in system, sys, root and almost all other folders via Root Explorer cant find it. Any ideas??
Thank you

Download the recovery from cwm site.
If it is in .img format then rename it to recovery.img and flash it via mobile odin.
Sent from my GT-N7100

UtkarshGupta said:
Download the recovery from cwm site.
If it is in .img format then rename it to recovery.img and flash it via mobile odin.
Sent from my GT-N7100
Click to expand...
Click to collapse
Ok, I'll try that
Thank you

jasonleeg said:
Ok, I'll try that
Thank you
Click to expand...
Click to collapse
FANTASTIC, thank you for your advice, its worked and now I can do nandroid backup before trying out the various ROMs, kernals ect.....

Step by step guide on flashing new modem?

Trying to get LTE to work.

Sent from my SGH-T889 using xda app-developers app
---------- Post added at 07:17 PM ---------- Previous post was at 07:12 PM ----------
culua said:
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Ops wrong method.

http://forum.xda-developers.com/showthread.php?t=2102380
Sent from my SGH-T889 using xda premium

deeznutz1977 said:
http://forum.xda-developers.com/showthread.php?t=2102380
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
Yeah this is what it says in flashing instructions:
For Odexed, Deodexed, Kernels, and Modems use CWM or TWRP to flash.
__-- Data will be preserved.
For Factory Image use Odin.
__-- Unzip the downloaded file and flash ".tar.md5" via Odin. Ignore "SS_DL.dll". Will LOOSE data and root. Back to Factory State.
____-- If you boot loop go back into recovery, do a factory reset, and reboot.
What does that even mean. I download the modem file and then...

sixpoint1 said:
Yeah this is what it says in flashing instructions:
For Odexed, Deodexed, Kernels, and Modems use CWM or TWRP to flash.
__-- Data will be preserved.
For Factory Image use Odin.
__-- Unzip the downloaded file and flash ".tar.md5" via Odin. Ignore "SS_DL.dll". Will LOOSE data and root. Back to Factory State.
____-- If you boot loop go back into recovery, do a factory reset, and reboot.
What does that even mean. I download the modem file and then...
Click to expand...
Click to collapse
And then you put it on the root of your sd card then boot phone into recovery (thats if your rooted and have a custom recovery , like cwm or twrp ) (get into recovery by having phone off press volume up and home center button and power button all simultaneously until I see the galaxy note II as creen let go of power but hold volume up and home buttun until your in recovery , then let go of buttons ) then go to install if in twrp navigate to the root of your sd card and selct the modem zip and press flash after that reboot and you should be good.
Sent from my SGH-T889 using xda app-developers app

zayydubb said:
And then you put it on the root of your sd card then boot phone into recovery (thats if your rooted and have a custom recovery , like cwm or twrp ) (get into recovery by having phone off press volume up and home center button and power button all simultaneously until I see the galaxy note II as creen let go of power but hold volume up and home buttun until your in recovery , then let go)just flash the zip as you would a custom rom or any other custom zip . )
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Thanks, I don't know whether or not there is a custom recovery, as I just got the phone and it came with the Jedi rom, not sure if that is cwm or twrp. And I've never rooted a custom rom or other zip before but this post certainly helps.

How do you put it in the root of SD Card? The internal one in the Note 2 right? Is there a specific folder I put it in?
And which file am I taking from the modem download? Just the .bin? Do I rename it?

sixpoint1 said:
Thanks, I don't know whether or not there is a custom recovery, as I just got the phone and it came with the Jedi rom, not sure if that is cwm or twrp. And I've never rooted a custom rom or other zip before but this post certainly helps.
Click to expand...
Click to collapse
Do yourself a BIG favor... slow down!!!! Start by doing a LOT of reading. Search button works great here... use it! You've never done any of this before, and if you do something wrong you are going to be posting "My phone won't boot" or some other thread that says your phone is dead.
Since you just bought the phone and it has a custom ROM, it has a custom recovery. Start by making a backup in recovery, and save to your sd card so you have something to fall back on.
Don't be silly an be too anxious and brick your device.

NO problem, if you have the jedi rom I can guarantee u have a custom recovery so just go ahead and take the steps I told u and u should be good . Having any trouble Pm me or watch some Youtube videos .
Sent from my SGH-T889 using xda app-developers app

Well, yeah... I've been asking for hours today and a couple yesterday if anyone had a simple, step by step guide to flashing the modem.
I remember android central had some good stuff for the fascinate but none for the note 2 it seems.
What do you even mean by, "in recovery"? Inside the CWM or TWRP?

sixpoint1 said:
How do you put it in the root of SD Card? The internal one in the Note 2 right? Is there a specific folder I put it in?
And which file am I taking from the modem download? Just the .bin? Do I rename it?
Click to expand...
Click to collapse
Based on your questions, DO NOT ATTEMPT to Flash the modem. You need to read up much more BEFORE YOU START.
One, wrong flash and you are screwed. Make sure you back up your EFS partition before you start so you dont loose your IMEI.

inspron said:
Based on your questions, DO NOT ATTEMPT to Flash the modem. You need to read up much more BEFORE YOU START.
One, wrong flash and you are screwed. Make sure you back up your EFS partition before you start so you dont loose your IMEI.
Click to expand...
Click to collapse
Ok... is there a way I can safely go back to just stock whatever t-mobile so I can just get the normal LTE update?

Do I take just the bin file onto the sd card or all these files in a folder?

And then do I put that/those files into one of these folders?

sixpoint1 said:
Do I take just the bin file onto the sd card or all these files in a folder?
Click to expand...
Click to collapse
You haven't listened to a thing to what anyone has said. So ya go ahead that's correct.
Sent from my SGH-T889 using Tapatalk 2

sixpoint1 said:
And then do I put that/those files into one of these folders?
Click to expand...
Click to collapse
root= sd no folders. the file doesn't really need to be on the root it just makes it easier to find. btw i answered you earlier in the lte thread

janjannsen99 said:
You haven't listened to a thing to what anyone has said. So ya go ahead that's correct.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for your help.

deeznutz1977 said:
root= sd no folders. the file doesn't really need to be on the root it just makes it easier to find. btw i answered you earlier in the lte thread
Click to expand...
Click to collapse
all right so once i boot into the recovery, i click "install" and then the modem bin file?
modem.bin doesn't show up when i boot into twrp

sixpoint1 said:
all right so once i boot into the recovery, i click "install" and then the modem bin file?
Click to expand...
Click to collapse
No dont extract the zip file,,,, recovery flashes only .zip's .....ssslllooowww down..all this is simple i promise

deeznutz1977 said:
No dont extract the zip file,,,, recovery flashes only .zip's .....ssslllooowww down..all this is simple i promise
Click to expand...
Click to collapse
.zip file itself onto the SD Card. Yes, that would clear things up. Thank you.
All right, finally the baseband version is now updated to T889UVBMB4

App to kill foreground app

Anyone knows an app that would kill the foreground app by longpressing or double pressing or any other way? Someting that works with stock rom. Thanks.

OddJack said:
Anyone knows an app that would kill the foreground app by longpressing or double pressing or any other way? Someting that works with stock rom. Thanks.
Click to expand...
Click to collapse
#HERE mate
flash in recovery
cheers

Christian Nothing said:
#HERE mate
flash in recovery
cheers
Click to expand...
Click to collapse
Thank you Christian, i donwloaded the file but dont know zip what to do with it. My s2 is stock, is that a problem? Do I need to root it?

Ok, I did some reading.
Can I use Odin to flash this file ( w/o rooting)?
I prefer not to use a micros sd because i dont think I have one or I have to search the whole house to find it.

OddJack said:
Thank you Christian, i donwloaded the file but dont know zip what to do with it. My s2 is stock, is that a problem? Do I need to root it?
Click to expand...
Click to collapse
I'm sorry mate if you wanna use this mod you have to be rooted
And I don't think you can flash it with Odin .
Sorry
Sent using my Premium-Zanpakutō {斬魄刀} powered by my Shinigami soul <+> ლ(◣_◢)ლ

Christian Nothing said:
#HERE mate
flash in recovery
cheers
Click to expand...
Click to collapse
thanks! worked perfectly fine.

Christian Nothing said:
I'm sorry mate if you wanna use this mod you have to be rooted
And I don't think you can flash it with Odin .
Sorry
Sent using my Premium-Zanpakutō {斬魄刀} powered by my Shinigami soul <+> ლ(◣_◢)ლ
Click to expand...
Click to collapse
Christian, I installed a rooted rom on my s2, now to do that mod you posted up there, do I need to go to recovery and wipe partition and davlik and then select the zip file from external sd card? Or how can I put that mod installed?
Or just put that zip file in a external sd card, put it in the phone and choose it to install?
Thanks

OddJack said:
Christian, I installed a rooted rom on my s2, now to do that mod you posted up there, do I need to go to recovery and wipe partition and davlik and then select the zip file from external sd card? Or how can I put that mod installed?
Or just put that zip file in a external sd card, put it in the phone and choose it to install?
Thanks
Click to expand...
Click to collapse
copy that zip file on your sdcard and reboot to recovery , flash the zip from sdcard after the zip had been installed wipe cache and dalvik , reboot and that's all
now you have back to kill function on your phone

Christian Nothing said:
copy that zip file on your sdcard and reboot to recovery , flash the zip from sdcard after the zip had been installed wipe cache and dalvik , reboot and that's all
now you have back to kill function on your phone
Click to expand...
Click to collapse
According to root check app my s2 is rooted and according to rom manager Clockworkmod is installed buy I cant access clockwork by holding power and volume up and down buttons. If I hold power and volume up buttons it goes to a recovery that I think is the stock module.
Now, what's wrong, why I cant reach the clockworkmod?
Do I need the cwm to install this mod? ( long press back to shut down app)
I put the zip file in the external sd card and used the stock recovery to install it but its not working.

OddJack said:
According to root check app my s2 is rooted and according to rom manager Clockworkmod is installed buy I cant access clockwork by holding power and volume up and down buttons. If I hold power and volume up buttons it goes to a recovery that I think is the stock module.
Now, what's wrong, why I cant reach the clockworkmod?
Do I need the cwm to install this mod? ( long press back to shut down app)
I put the zip file in the external sd card and used the stock recovery to install it but its not working.
Click to expand...
Click to collapse
Hey man search for the philz kernel and flash it via Odin then reboot the phone in recovery mod and flash the btk mod .
Sent using my Premium-Zanpakutō {斬魄刀} powered by my Shinigami soul <+> ლ(◣_◢)ლ

Christian Nothing said:
Hey man search for the philz kernel and flash it via Odin then reboot the phone in recovery mod and flash the btk mod .
Sent using my Premium-Zanpakutō {斬魄刀} powered by my Shinigami soul <+> ლ(◣_◢)ლ
Click to expand...
Click to collapse
All philz kernels I can find are for s2 i9100 mine is d710

OddJack said:
All philz kernels I can find are for s2 i9100 mine is d710
Click to expand...
Click to collapse
what
why you didn't told me that your phone is Samsung Galaxy SII Epic 4G Touch cuz the links where i guided you were for the international version
this is your forum section : http://forum.xda-developers.com/forumdisplay.php?f=1281
tomorrow i will help you with this problem of yours if you still didn't found any btk mod for your epic 4g phone :angel:

[RECOVERY] CWMR for Micromax A91

Full tutorials for Installing CWMR 6.0.2.8 in your Micromax A91
Click to expand...
Click to collapse
SP Flash Tool method, root not required
Click to expand...
Click to collapse
1. Download MTK6577 Drivers.zip and unzip/extract on your Windows PC, just run InstallDriver.exe to install drivers.
2. Download CWMR 6.0.2.8 + scatter.zip and SP_Flash_Tool unzip/extract them.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted CWMR 6.0.2.8 + scatter folder and select MT6577_Android_scatter_emmc.txt file.
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with battery inserted + Press and Hold Volume Up Key) via the USB cable.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed CWMR !
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager.
Click to expand...
Click to collapse
Booting into CWM recovery is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into CWM!
To revert back to stock recovery.... download Stock Recovery.zip and repeat the same steps again.
Click to expand...
Click to collapse
STOCK FIRMWARE FOR GETTING THE WARRANTY BACK ON MICROMAX A91​
Click to expand...
Click to collapse
CREDITS​
DR_MOOSAVI for SPFlashTool (ofcoarse!!!)
Forever Alone for Stock Firmware​
Click to expand...
Click to collapse

may i ask a question???
Is the stock rom is working???

Yes....
Alex Thunder said:
Is the stock rom is working???
Click to expand...
Click to collapse
yes stock rom is working. flash it via spflashtool... use this:good:

sorry screen shots please!!!
droid man said:
yes stock rom is working. flash it via spflashtool... use this:good:
Click to expand...
Click to collapse
first of all,thank you so much sir for your quick response.it works and now my phone is working properly its all because of u.sir if possible please upload ur 4.2.2 rom also.
thank u once again

My own ROM is undr testing as it contains many bugs (ofcourse) as soon as bugs are fixed i will upload it nd dont say thanx tap thanx
sent using my micromax A91 android 4.2 custom my own rom +many more tweaks using XDA Premium

droid man said:
My own ROM is undr testing as it contains many bugs (ofcourse) as soon as bugs are fixed i will upload it nd dont say thanx tap thanx
sent using my micromax A91 android 4.2 custom my own rom +many more tweaks using XDA Premium
Click to expand...
Click to collapse
once again a very quick resspons,thanks and i'm also tapping thanks.
i'll wait for that rom...

A new GUIDE
Alex Thunder said:
A new Guide jst For u
Click to expand...
Click to collapse
You can Increase the Internal Memory Using THIS guide.

droid man said:
You can Increase the Internal Memory Using THIS guide.
Click to expand...
Click to collapse
is this safe??

Alex Thunder said:
is this safe??
Click to expand...
Click to collapse
Yes u can use this it is 100% safe.... sry for late rply

I downloaded CWMR for micromax ninja A91 but when i try to flash it via sp flash tool it shows recovery is checked but without path plz help
Sent from my Micromax A91 using xda app-developers app

Kevin Koli said:
I downloaded CWMR for micromax ninja A91 but when i try to flash it via sp flash tool it shows recovery is checked but without path plz help
Sent from my Micromax A91 using xda app-developers app
Click to expand...
Click to collapse
Check that the path provided for recovery.img file is correct...also u can try by putting scatter loading gile in the same folder as it is for recovery...
sent using my micromax A91 android 4.2 custom my own rom +many more tweaks using XDA Premium

When i load the scattering file of CWM it shows recovery is checked but no path is checked. And can you give recovery.img of CWM so that i can flash it Via Mobile uncle tools
Sent from my Micromax A91 using xda app-developers app

[Q] Getting E:Signature not verified error while Rooting

Tring to root my Samsung Note 3 Neo N750- Followed exact steps as mentioned in thread below
http://forum.xda-developers.com/note-3-neo/orig-development/philz-recovery-build-1-t2857149
But at the time of installing zip from SD card, getting error E:\Signature not verified for whole file
and the device is not rooted!
Please help.
P.S. I am not too technical and trying rooting for the first time.

mohit.mair said:
Tring to root my Samsung Note 3 Neo N750- Followed exact steps as mentioned in thread below
http://forum.xda-developers.com/note-3-neo/orig-development/philz-recovery-build-1-t2857149
But at the time of installing zip from SD card, getting error E:\Signature not verified for whole file
and the device is not rooted!
Please help.
P.S. I am not too technical and trying rooting for the first time.
Click to expand...
Click to collapse
I think you are trying to Flash the SuperSu zip via Stock Recovery..
First flash Philz CWM recovery via odin and then flash SuperSu zip using Philz recory to get rooted..
Press thanks if helped..

kushal.arora16 said:
I think you are trying to Flash the SuperSu zip via Stock Recovery..
First flash Philz CWM recovery via odin and then flash SuperSu zip using Philz recory to get rooted..
Press thanks if helped..
Click to expand...
Click to collapse
Sorry, I am confused- what does this mean? " flash SuperSu zip using Philz recory"
Could you please provide step by step desc? thanks

mohit.mair said:
Sorry, I am confused- what does this mean? " flash SuperSu zip using Philz recory"
Could you please provide step by step desc? thanks
Click to expand...
Click to collapse
Okk.
1. Download Superuser zip from following link and copy the zip to internal memory..
http://download.chainfire.eu/396/SuperSU/
2. Download Philz recovery build 3 from following link
https://s.basketbuild.com/devs/rutvikrvr/hl3g/cwm
3. Download odin.
4. Switch off the phone and remove back cover as you will have to pull down battery in next step.
5. Put you phone in download (odin) mode.
6. Flash Philz recovery you just downloaded via odin, after it say Reset in odin and you phone vibrates, quickly pull down the battery.. Do not let the phone switch on.
7. Now go to recovery mode..
8. Flash SuperSu zip which you downloaded and copied in your phone's internal from there.
Rooted..

Wow! Worked seemless!! Rooted!! Thanks a ton!
Could you also let me know how can I remove Samsung bloatware??

..

mohit.mair said:
Wow! Worked seemless!! Rooted!! Thanks a ton!
Could you also let me know how can I remove Samsung bloatware??
Click to expand...
Click to collapse
Nice to know you are rooted..
Download Attached app Root Uninstall to remove system app (So called Blotwares)..
On the Top you will see System App/User App, tap it to switch between System or User Apps.. Then just tap on the apps you want to remove and press Uninstall on the bottom of the app..
There is also an option to backup the apps.
Don't Say, just PRESS Thanks <===============

Thanks yet again!
After Rooting. Android System seems to be eating toouch battery. Almost equal to Screen. See screenshot attached.
Any clue why?
Sent from my SM-N750 using XDA Free mobile app

mohit.mair said:
Thanks yet again!
After Rooting. Android System seems to be eating toouch battery. Almost equal to Screen. See screenshot attached.
Any clue why?
Sent from my SM-N750 using XDA Free mobile app
Click to expand...
Click to collapse
Sorry, no Idea on this..

mohit.mair said:
Thanks yet again!
After Rooting. Android System seems to be eating toouch battery. Almost equal to Screen. See screenshot attached.
Any clue why?
Sent from my SM-N750 using XDA Free mobile app
Click to expand...
Click to collapse
You might have uninstalled important files...This is might be a side effects.
Do not play with root if you do not have enough knowledge what you are doing.