Power button sometimes takes me to lock screen? - G4 Q&A, Help & Troubleshooting

Sometimes when I press my power button, wanting to power off the display, I instead get the lock screen. Has anyone else noticed this?
Start position is just the home screen.
Found another thread with similar issue but in that case it's a HTC EVO.
http://forum.xda-developers.com/showthread.php?t=1797854

Is it possible that the power button is registering 2 presses, instead of 1?
What if you start with the phone turned off, then press the power button? Does it turn on, then off again?

I'm never able to reproduce it at will but I suspect you are right.
Sometimes the press on the power button isn't registered at all so I suspect it's a hardware issue.
Have noticed it since day one and I have had the phone for a month now.
Sent from my LG-H815 using Tapatalk

Got it back from LG authorized service center now. New power button and new camera glass (that was another issue I had).
All OK, it was a hardware issue!

Related

Power button problem

Hi all,
My XDA IIs works well before. But few days ago the Power button doesnt work properly, it can turn on the phone, hold to turn off the back light, but I can't use it to turn my phone screen off like before. Anyone has same problem ?
Can you see any part of the screen? It might just be that the backlight adjustments are set too low when the unit isn't cradled. You might be able to see the screen in daylight.. or maybe it was inside your home. I forgot where I was at when it happened to me. In anycase, if you can see a bit of images on your screen, go into the Backlight properties and change the setting to your liking.
Good luck..
The problem is i can just press the power button to turn off my phone BEFORE (the screen is completly off), and NOW it doesnt work at all ! When my phone was off, I can press the Power button to turn it on, or when I hold it for few seconds the back light will be turned off, but press once to turn off. I dont know why, if somthing wrong with the Power button it should be doesnt work at all, that's mean i cannot turn on my phone as well. But other functions of the Power button are still work well, except the 'Turn off' :roll:
power off doesn't work anymore
I have the same problem here. I can't use the power button to power off my qtek 9090!!
i can use the power button to turn my pda on and to switch the background light on and off - so the "hardware side" of the power button is working.
however, i can't use the power button to turn off the device. it's very annoying, because i can't put it in my pocket after finishing a call :-(
this should be some sort of a software problem - so i hard resetted my device (a couple of times) - but that didn't help!
can anyone help?
thanks,
lorenz
the ba doesn't turn off it is always on staand by mode. ->settings -> system -> button lock
this will stop any missed call because when the ba is in standby the power button is the only one to work
power on is no problem. i can't put my BA into standby mode. if i press the power button while the BA is turned on, nothing will happen. the screen will stay on, the background light stays on.
i have no way to put it into stand-by with the power button!
try this and see if it works. it's a software app that wil rest, shut down, and turn the screen off. just copy it to your BA temp directory and install it.
power button problem
nemchua
Is your problem solved ?
Because I have the same problem.
Power of switch doesn't work !!!
Any help would be welcome.
power button problem
Does anyone solve the problem???
Had the same problem...
I had the same problem going on for about two weeks or so...never changed anything and it went away all by itself.
The problem has not come back now in over 4 months.
Sure would love to know what the problem was tho...
Greetings,
Noddy
Power Off does not work
Add my name to people with this problem.
The only event I can link it to is this: I deleted my Motorola Bluetooth headset and installed a Logitech headset. I noticed the problem (can't turn OFF with POWER BUTTON) soon after that.
same problem for me ..... someone must know !!!!
I think it is a hardware problem. The contact is not making cleanly. Disassemble and spray time, perhaps.
It's a standard push switch, easy enough to replace, I occasionally list themon ebay but any phone repairier should have them in stock.
Richard
i had same problem yesterday afternoon, but it is ok now. recovered by himself
Write again in two weeks and let us know if it is still healthy. In my case, anintermittent problem became continuous.
Can't turn the screen on after pressing power button
I have a problem with my Bell Atrix. After pressing power button to lock the screen, i can't wake up the screen up by pressing that button again. Could anyone tell me how to fix it pls.

Power button does not funtion properly

Anyone else had this issue? I've never had any problems until today, but my power button does not function properly. I cannot click it to lock the screen, nor can I unlock it using the button or hold it down to turn it off. I am forced to used the Home button to unlock the screen.
I have tried removing the battery, but as soon as I put the battery back in, it instantly powers back on.
Anyone else seen anything like this?
Are you sure the power button is not stuck in

[Q] Screen not starting up for power button

Hi,
I started to get a weird problem since last week. I've had this phone for about 3 months now and never had any problem like this.
It all started one morning when I wanted to stop phone alarm. The alarm was going off but the screen was black. I pressed the power button to wake up, but it was still black. After couple of times pressing the power button the screen came up. First it was not that often but the situation started to get worse. It came to that I can sometimes cannot turn it on for a long period of time. I need to keep pressing power button, volume buttons and eventually it will come up.
This is what I've found so far:
1) When the power button is pressed, although the screen doesn't start up, I can see the three buttons at the bottom lighting up. So it is not a problem of the power button.
2) When the power button is pressed, although the screen doesn't power up, the screen seems responsive. I can feel the vibrations when I tap (I have a startup password)
3) When the phone is connected to a power supply, screen always starts up without a problem.
4) Screen will start up more frequently when the batter power is high.
It seems as though there is a connection between batters power and the screen not starting up. But then again, once the screen comes up (after not starting up), then it works fine, until I turn the screen off.
Has anybody experienced anything like this before?
I did a factory reset thinking it might be some application I installed but it didnt help.
I had to send this phone once to repair the speaker and cost more than $80 just for courier. I don't want to spend another to get this fixed.
Thanks.
I have this problem or a problem very close to this. I have a HTC One X (international version). I'm running the latest version and updates and the problem has existed for at least the last two updates.
Android Version 4.1.1
HTC Sense version 4+
Software number 3.18.401.1
I have the screen lock pattern turned on.
Sometimes when I hit the power button, the phone does not turn on and so I press it again and only after a third press does the phone turn on. I then unlock the phone and use as normal. So, several times per day I have to press the power button three times before the phone turns on. But other times I press the power button once and it turns on straight away. I've just turned the pattern unlock off to see if this makes any difference. I'll start to record the exact details of when I experience this and see if we can work out a common cause.
Hopefully if enough people report this problem then they can send out an update to fix this problem.
exazonk said:
I have this problem or a problem very close to this. I have a HTC One X (international version). I'm running the latest version and updates and the problem has existed for at least the last two updates.
Android Version 4.1.1
HTC Sense version 4+
Software number 3.18.401.1
I have the screen lock pattern turned on.
Sometimes when I hit the power button, the phone does not turn on and so I press it again and only after a third press does the phone turn on. I then unlock the phone and use as normal. So, several times per day I have to press the power button three times before the phone turns on. But other times I press the power button once and it turns on straight away. I've just turned the pattern unlock off to see if this makes any difference. I'll start to record the exact details of when I experience this and see if we can work out a common cause.
Hopefully if enough people report this problem then they can send out an update to fix this problem.
Click to expand...
Click to collapse
I'm pretty sure this is a hardware issue. I bought mine from Expansys and sent it back to them for repair. It's been more than a month and they say they're still reparing it.
In my case it was impossible for me to start the screen up with power button no matter how much I pressed it. The only thing that worked for me was to press the back of the phone just below the camera. So it seems like a hardware issue. But on the other hand, at times when I can't get the screen turned on no matter what I do, I'd turn the phone off and start again and the thing would start up like nothing happened. So while I'm pretty sure it is a HW issue, I'm not sure how a power restart makes it work.
For me I don't think that this is a hardware problem as it only started happening once I did the big upgrade from 4.0 to 4.1 and then it follows a specific pattern. That is three power button presses will always turn it on. Less frequently I also get a problem where the power button turns on the three lights on the soft buttons but the screen remains black. I then hit the power button to turn it off, and again to turn it on and the phone is back to normal again.
Is yours an international version? I bought mine an international version and had it shipped to Australia.
solved?
Hi - did anyone ever solve this? This is happening to me with my HTC desire X after having had the screen repaired, so I think it is hardware related, but the shop doesn't know how to fix it! My screen also does not turn back on when I want to end a phone call and pull the phone away from my face anymore. These problems seem related as they started at the same time. I would be grateful for help!

[Q] Sensitive Power button and reboot problems

My S3 started randomly rebooting yesterday. The power button also because super sensitive. Just a light brush would cause the phone to register a press.
I edited my .kl files and disabled the power button and remapped it to the volume down button. I haven't had as many problems as I did yesterday but now it shuts down when I plug in the usb cord and it did shut down one more time when I picked it up off my desk.
I thought it was a faulty power button that was causing my phone to reboot but now I'm not so sure. Remapping seems to have helped a little though.
The files I edited were sec_keys.kl and sec_powerkey.kl. For both I disabled key 116 POWER WAKE and remapped it to key 114 which is the volume down key.
Any ideas on how to fix this completely? Is there another power setting I'm missing? I'm 3 months from my upgrade and don't really want to spend cash on this thing.
The power button is a somewhat common issue. Look at some disassembly videos. Maybe you can find a way rig it or replace it. The parts are pretty cheap if youre willing to attempt it.
Sent from my SM-N900T using Tapatalk
I think I have mostly solved my issues. I pulled out the power button and I haven't had a problem since. Between that , the remapped power key and the Auto Screen On app I think I can make it till upgrade time.

Broken power button workaround to turn on.

So I have a OnePlus 3 since it was released and my power button started not working properly about a year ago.
And today I found out that the power button was not working at all anymore no matter how hard I pressed.
At first it was clicking twice instead of once (shortcut to open the camera), or I had to press it very hard to make it work.
I found some workarounds (double tap to wake, double tap to lock, etc).
So when the device is powered on, it's fine I can do everything I need.
The problem is when I need to poweroff the device (changing sim card) or when it runs out of battery.
On some other threads people say to hold the volume down button and to plug the phone to a computer.
But it doesn't work for me, when I do that the device goes to the bootlogo (before the romlogo) and is stuck there.
Any help or idea appreciated.
Also I am not willing to change the power button because it seems hard to take apart the device according to this tutorial : https://fr.ifixit.com/Tutoriel/OnePlus+3+Power+and+Volume+Button+Assembly+Replacement/76019
I am on Lineage16 if that can help.
I feel you. I have broken power button since august... Found workarouns like you. But for me, power button starts to work after one or two weeks so i think it is software issue. But about replacing power button you are really wrong. OnePlus 3 is one of the easiest phones to repair. The thing is, you dont need heat gun to warm adheasive... You just take out screws and pop out the screen. This is kinda one of the reason why i took my phone so i can change battery with no problems or do any other repair by myself. But in the past 3 year i did not need to take apart my phone ?*. You can look up jerryrigeverything he tears down oneplus3 and shows everything step by step. Its indeed really easy, compared to other phones.
Plz answer this then I have replaced power and volume ribbon cable twice with new ones and my power button still not working volume is fine though and I want to unlock bootloader but without power button I can not select the option to do so?

Categories

Resources