Related
So i messed up when trying to update my watch and somehow deleted the firmware so my watch bootloops upon start-up, any way to fix this?
Im have the same problem. Im stuck in bootloop after trying to flash custom kernel. I can not rech recovery. Not original recovery or TWRP. Fastboot works. What to do?
Is there any restore image to flasH?
Here are three solutions in one answer, because you did not give quite enough info.
First, try holding the button on boot up. Hopefully that will get you into usb mode. If it works, download the sony software, and go to the help section, and download and install the update.
Option two,
Code:
adb reboot recovery
Or, download the version of twrp for your build as well as your original image, and use fastboot.
Code:
Fastboot boot twrp.img
then use twrp to install the factory zip. You can do this directly in fastboot too, but it is more difficult because fastboot only installs each image separately. If I knew what versions of software you had, I could help you find the images you need.
I have tried both fastboot flash and fastboot boot for both original recovery and also TWRP, but non of the recoverys will boot, not even with Fastboot boot.
The command lines says OK on my PC, It is getting downloaded, and it says it is booting / flashed [OKAY].
But all I get on my Smartwatch 3 is bootloop.
My Smartwatch 3 is OEM unlocked. I even tried to lock it, and unlock it again.
I have full contact with fastboot on my PC, all the commands are taken in and seems to work, but my smartwatch won't boot no system or no recoverys. Only USB-mode and Fastboot mode...
I have also tried to clear cache and userdata in fastboot after OEM Unlock.
I will try the Sony Software now. That is my last way out I Think.
The Sony PC Companion software from sony's website worked for me to save my smartwatch from bootloops . I just did a update and installed it over what was already on the smartwatch.
Thanks lekofraggle for quick answeres. I had no idea the PC Companion had this feature.
SimDroid, I am glad that helped. If it hadn't, the next step would be to flash an image through fastboot. That would be scary, because it sounds like your boot loader was corrupt. It's nice to know the usb and PcCompanion piece still worked. Another reason this watch is incredible.
Cheers.
does anyone have a download for the original (5.0.2 im guessing) ROM for this watch? I want off the rubbish 5.1.1 update before i am forced to sell the watch due to the terrible battery
The smartwatch works as it should now, original recovery and everything is back!
So, if i may go back to where it started?
I noticed now that I flashed the custom kernel for the watch built for wrong firmware. Im on 5.1.1, and there doesnt seem to be a developed shared kernel with all four cores unlocked for it.
Im also interested in where I can find those images to flash via fastboot as you mentioned lekofraggle
I accidentally allowed the 2.20.40.183 OTA update, which rendered my phone useless. I tried putting MOFD_UPDATE of 2.20.40.174 on my SD card, but that didn't work.
Here's a few other things I tried:
Recovery menu: Updating phone, then dead droid. No menu appears.
adb sideload: adb didn't recognize my phone.
fastboot flash: Permission denied, or something along those lines. The write fails. Tried to flash system.img but it never did and nothing happened.
adb sideload through temporary CWM: Unauthorized device. Couldn't sideload.
Flashing through temporary CWM and temporary TWRP: Fails early on with Status 7. 2.20.40.174 is older, and this is apparently reason enough to deny me.
Does anyone have an idea about what I can do to fix this? Could I flash Cyanogenmod, then flash stock over that, using temporary CWM/TWRP?
My bootloader is not unlocked.
PasserbyPassingBy said:
I accidentally allowed the 2.20.40.183 OTA update, which rendered my phone useless. I tried putting MOFD_UPDATE of 2.20.40.174 on my SD card, but that didn't work.
Here's a few other things I tried:
Recovery menu: Updating phone, then dead droid. No menu appears.
adb sideload: adb didn't recognize my phone.
fastboot flash: Permission denied, or something along those lines. The write fails. Tried to flash system.img but it never did and nothing happened.
adb sideload through temporary CWM: Unauthorized device. Couldn't sideload.
Flashing through temporary CWM and temporary TWRP: Fails early on with Status 7. 2.20.40.174 is older, and this is apparently reason enough to deny me.
Does anyone have an idea about what I can do to fix this? Could I flash Cyanogenmod, then flash stock over that, using temporary CWM/TWRP?
My bootloader is not unlocked.
Click to expand...
Click to collapse
I do the same! Now my phone stuck on boot screen.
Does anybody can help us?
http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256
mr_gourav2000 said:
http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256
Click to expand...
Click to collapse
I'm not going to lie, that guide's a bit hard to read. I'll try to follow as best as I can and reply if this works for me.
I'd still appreciate any other advice others have.
PasserbyPassingBy said:
I'm not going to lie, that guide's a bit hard to read. I'll try to follow as best as I can and reply if this works for me.
I'd still appreciate any other advice others have.
Click to expand...
Click to collapse
All necessary to read.
Hope you fix the problem.
Fixed
I managed to fix my phone, but not with the method Mr Gourav so kindly posted. I chose not to use mr_gourav2000's IntelSoC fix because the guide was written in a way that made it very hard to follow, and I was unsure if MOOREFIELD was supposed to flash briefly or stay on the Device Manager. Regardless, I wasn't going to risk bricking my phone beyond help by pushing on without knowing what i was doing.
The key was bypassing Status 7 (or 1), which prevents you from downgrading firmware. If your phone says something like "Installation failed with Status 1" or "Status 7," or you get the "Can't install this package over newer build" error when you attempt to flash a previous firmware, this fix can help you. Funny enough, the fix was posted by the very same person earlier this year:
http://forum.xda-developers.com/showpost.php?p=65995574&postcount=116
First, download the latest full firmware from Asus' support site: https://www.asus.com/Phone/ZenFone_2_ZE551ML/HelpDesk_Download/
Then, open or extract the .zip file, and go to into UL-Z00A-WW-(Firmware.Version.Number)-user.zip\META-INF\com\google\android\ . Select updater-script (no file extension), and open it in a plain text editor like Notepad++.
Remove lines 1-6, beginning with "(!less_than_int" and ending with "getprop("ro.product.device") + "\".");". The result should look like this.
Then, insert the edited updater-script into the .zip file, overwriting the old updater-script. At this point, I should mention that one of the removed lines probably checked your phone's model number to see if it was compatible with the firmware. I sure hope you downloaded the right file for your phone. If not, brick city here you come.
Finally, put the edited .zip into a microSD card, and insert that into your phone. If you want to use the stock recovery to install the firmware, rename the .zip to MOFD-UPDATE.zip and put it in the root of the SD, then restart the phone and let it update. Presumably. I didn't use the stock recovery. I used the temporary ClockworkMod recovery to fix my phone, so I'm not sure if it's that simple. If you're using that temporary CWM, just go to the zip installation menu and apply the zip from external_sd.
If you were going through the same problems I was, your phone should boot into stock, unrooted firmware again. Pat yourself on the back and never do whatever dumb thing you did to get to this point in the first place (like absentmindedly apply an OTA update in the middle of a lecture)!
Once again, thanks to mr_gourav2000 for posting this fix earlier. I may not have understood the IntelSoC fix, but I did understand this one!
.183 after update takes an extremelynlong time to boot after asus screen aa well. Made me think mynphone crashed, took a bout 10-15 minutes on first boot for me
Redtexan said:
.183 after update takes an extremelynlong time to boot after asus screen aa well. Made me think mynphone crashed, took a bout 10-15 minutes on first boot for me
Click to expand...
Click to collapse
If it's the 1st boot it generally will as it is recreating cache, dalvik-cache or ART...
It seems to take forever to clear cache too when using recovery but about a heartbeat when using fastboot.... Just another quirk of the phone...
Thank you much
I gotta say, this got me on the right path. Though my issue was exactly the same the fix was a little different.
I had to use the next patch and that worked. Recovery is working now and I have to manually update, but still have root, so no real big deal.
Thanks again.
mastet68 said:
I gotta say, this got me on the right path. Though my issue was exactly the same the fix was a little different.
I had to use the next patch and that worked. Recovery is working now and I have to manually update, but still have root, so no real big deal.
Thanks again.
Click to expand...
Click to collapse
You need to flash boot, droidboot and recovery for the build you are using.
I use fastboot to do this but make sure developer settings are enabled and USB debugging is ticked before trying to flash.
To find the img files for the above mentioned, go to Shakalaka's pre-rooted rom thread in Android Developement, you don't need to download the rom if you don't want to but it sure makes rooting easy.
Find the version of Android you need and download boot,droidboot and recovery img files. Flash with fastboot using these commands -
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash fastboot droidboot.img
***Make sure the right commands are used or it may result in a brick...***
Hi there,
Proud owner of a new Pixel XL. Unlocked version. Tried rooting last night (i've rooted all devices i've owned and am not new to this). Followed the instructions to a "t". The device won't get past the white screen and dots leapfrogging each other. Now when going back to fastboot, device isn't recognised by ADB Fastboot etc...
Please help!!!!
My guide should be able to help you get back to the OS and then install root.
Keep in mind you may lose data if you don't remove the -w from the script mentioned in the guide.
http://forum.xda-developers.com/pixel-xl/how-to/info-how-restored-to-stock-soft-t3494478
Did you unlock bootloader?
Then immediately try rooting?
That is one cause for bouncing dots.
You should: flash factory image, then boot into device before any flashing. Setup device until you are at the home screen and OS settled. Use a pattern or pin security. That is needed to make recovery work properly. You need to decrypt at recovery boot. No ask for pin? Then power off and boot TWRP again.
Follow directions in TWRP and SuperSU threads to a Capital "T"...
Versions:
Latest "Q" firmware
Boot TWRP RC1 img, then flash zip installer
Use SuperSU 2.79 SR1.
You'll have no bootloop. I found first rooted boot to take just a few minutes.
Just in case: update SDK platform tools if you haven't cos that screws people up for days too.
Thanks mate. But i get to step 9 and nothing happens. My device is no longer recognised
thanks mate, but the problem is that now the device is simply not recognised by my computer. I can't flash anything
I should clarify.
SDK is 100% up to date.
I am trying on both Windows 10 and Mac.
Device drivers worked fine prior to trying to root.
I'm really worried that i might have just bricked a $1.4k(aud) device
I unlocked my bootloader and got a bootloop when I tried to fastboot to root. Would not recognize the device either. I redownloaded SU 3 as suggested in the third post and it worked. Good Luck.
I used the fastboot to root method and did not install TWRP.
http://forum.xda-developers.com/pixel-xl/help/bootloop-t3498140
Thanks, Mike01680. trying now
When i go into sideload i can see the device listed on adb devices!
Okay. Booted into recovery, found my firmware for NMF26O. Downloaded and ADB Sideloaded it can once again boot. thanks for all of your help!!!
I have no idea how to root or anything like that, I bought this oneplus 3 and had a update a week later.. so when I did the software update it took me into teamwin recovery mode and now I don't know how to get back into my phone please help....
Did you buy the phone second hand or did you try to flash TWRP yourself? It shouldn't have TWRP installed by default.
Regardless, you can use TWRP to flash the latest update.
Given that you have TWRP, I'm assuming that you have an unlocked bootloader. Did you notice a warning pop up everytime you reboot your phone before? It should say something along the lines of "your device has been unlocked and can't be trusted". If not, you'll have to unlock it (it wipes your phone in the process).
If the bootloader is unlocked, you can simply download and flash the latest zip for OOS 4.0.3 in TWRP. This will update you phone and replace TWRP with the stock recovery (so you don't run into this problem again in the future when installing an OTA). If you don't intend to modify your phone in any way, then this is all you need to do, your phone should be functional.
There are plenty of threads with detailed guides on how to do all of this.
I'm also stuck on TWRP after stupidly downloading the latest OTA and I don't know what to do!
Phone won't boot normal, just goes off.
Situation:
- Bootloader, Fastboot and TWRP wil load.
- Device seen by windows
- Zip install in TWRP gets stuck at 'patching zip unconditiontally'
- Another zip flashes, but gets stuck at the end, no reboot option (manually but that's not the way)
Can someone please point me in the right direction? I don't care if I lose data, just want my phone back!
not helping:
Saying i'm a dipsh-t I know, I know, I will do better in the future, for now, help a brother out please
sndr1384 said:
I'm also stuck on TWRP after stupidly downloading the latest OTA and I don't know what to do!
Phone won't boot normal, just goes off.
Situation:
- Bootloader, Fastboot and TWRP wil load.
- Device seen by windows
- Zip install in TWRP gets stuck at 'patching zip unconditiontally'
- Another zip flashes, but gets stuck at the end, no reboot option (manually but that's not the way)
Can someone please point me in the right direction? I don't care if I lose data, just want my phone back!
not helping:
Saying i'm a dipsh-t I know, I know, I will do better in the future, for now, help a brother out please
Click to expand...
Click to collapse
Simple, check the OnePlus D/L sites for this one http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3.img and flash it by TWRP or fastboot to RECOVERY. Boot once with the official Recovery and all ist fine again.
This is issue of using a faulty twrp so for that when ur phone us booting up go to fastboot and flash twrp 3.0.4-1 and everything will work
emuandco said:
Simple, check the OnePlus D/L sites for this one http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3.img and flash it by TWRP or fastboot to RECOVERY. Boot once with the official Recovery and all ist fine again.
Click to expand...
Click to collapse
Similar Problem here:
just wanted to flash latest OOS 4.0.3, so I flashed back stock recovery with flashify and rebooted into recovery mode to flash the already downloaded OOS 4.0.3. zip. That's when it began to go poop! After rebooting it just went dark with no Chance to power it on again! No dice with power button, Volume up/down + power button, nothing! Not even the LED's are blinking when plugged in. So this one seems to be basically dead!
I got it once booting again after randomly pushing the buttons (after x minutes!?), but everytime I reboot the phone it just shuts off without beeing able to power it on again. At the Moment it's dead!
Any ideas what might happened? If I get it on again, should I immediately reset it to factory Settings?
I am kinda lost here! Any help/ideas would be much appreciated!
Flashify? Never used it and never trusted apps which flash stuff on a running system. Use fastboot and reflash the recovery partition. Link to recovery is in my former post.
fastboot flash recovery PATHTOIMGFILE
Thank you for your advice! Still a lot to learn! Got it up again, will try as you suggested!
It appeared that my stock recovery file was corrupted , but all is fine again! Thank you very much!
Mannycolon85 said:
I have no idea how to root or anything like that, I bought this oneplus 3 and had a update a week later.. so when I did the software update it took me into teamwin recovery mode and now I don't know how to get back into my phone please help....
Click to expand...
Click to collapse
I may have been the person you traded with to get the OnePlus 3, but I took the phone back and after 5 hours I got it up and running.
The phone would boot to TWRP, but even after wiping the entire system and dragging a ROM zip to the internal storage, reinstalling did nothing. It just kept booting back to recovery.
The solution entailed the following.
Download stock recovery IMG. Flashed through TWRP. Rebooted recovery and now was back to stock recovery.
Download the official OxygenOS ROM zip from the OnePlus website and changed the name to update.zip
Next I downloaded Android studio for access to ADB. I had never used ADB before, but I knew this was needed to push a file to the phone.
Needless to say, ADB kept freezing my computer when I would type in the commands to side load.
I deleted Android studio and installed a minimal ADB/Fastboot I found online. I opened my command prompt, typed the command for sideloading, and immediately got my installation starting. It took about 10 minutes to fully install. When it was finished, I rebooted and had a fully functioning OnePlus 3
Sent from my ONEPLUS A3000 using Tapatalk
Hi everybody,
I try to root my Blackview BV9500 by installing first TWRP recovery. I use fastboot mode on a linux laptop to do that.
I successfully flash the twrp recovery image, but after that, the phone don't boot in recovery anymore.
It try to boot into recovery, but it reboot in normal mode a few second after.
I tried also with the cmd "fastboot boot recovery.img".
When i flash back the original recovery image, it work, i can boot the original recovery without any problem.
Does anyone have the problem?
Some one can help me to find a solution?
I, too, am trying to do this. I have not yet flashed it... I was going to use the fastboot boot command to boot the recovery kernel before permanently flashing it, to make sure it would work, and in my googling I stumbled across this post. Serendipity! [Edit 3: Although, reading your post again, I see you tried that as well and it didn't succeed for you. For me, it simply tells me remote: command not found, so how were you able to even get that to work?]
All that said... I have the BV9500 Pro, specifically for the two-way radio, so I'm going to try to keep that little tidbit of hardware working in the process. I mainly just want to tweak the menus a bit, tweak the quick settings, get root, delete the Google crapps I won't be using...
On to your problem, though, I can't help much but maybe if we post back and forth our successes and failures we might be able to stumble through it together?
First, I assume you already have unlocked your bootloader? [Edit: Honestly, I'm not sure flashing the recovery would be allowed without first unlocking the bootloader]
[Edit 2: Perhaps this thread might be of help. Different model, but often the hardwares used by manufacturers are similar enough that the same steps generally work. ]
Thank you for the link, maybe i need to flash the complete rom with the twrp recovery with spflash tools, and it will work.
I will try and let you know, but i will make a backup of my rom before flashing it!
For your problem with fastboot, maybee it's because you need to install it. You can use the command "sudo apt-get install fastboot" on a terminal window if you are on linux.
If you want to enter the recovery mode, you don't need to use fastboot, you can simply enter it by pressing Volume Up and Power buttons together for a couple of seconds when your phone is off.
When Boot Mode appears release all keys.
To flash recovery with fastboot, you need first to enable the developer mode on your phone (go to "Settings > About phone" and make 7th tap on the build number, the Developer options will be unlocked and available), and unlock the bootloader of course.
here what is the process i made to flash the recovery :
- i use the command "adb devices" to check if the phone is well connected. (response is like "BV9500S320001179 device")
- then i enter in fastboot mode with "adb reboot bootloader" (phone reboot and ask confirmation for fastboot mode)
- check with command "fastboot devices"
- unlock the bootloader with the command "fastboot oem unlock" or "fastboot flashing unlock".
- flash the phone with the twrp recovery with "fastboot flash recovery recovery.img"
- reboot the phone in recovery mode with "fastboot boot recovery.img"
Normally the phone boot in twrp recovery.
Hope that will help you too.
I am too facing this problem. In case you got any solutions please let me know too.
Yves596 said:
For your problem with fastboot, maybee it's because you need to install it. You can use the command "sudo apt-get install fastboot" on a terminal window if you are on linux.
Click to expand...
Click to collapse
Yup. Already had fastboot installed for the LG G5 this phone replaced, the Galaxy Note 4 the LG replaced, the MyTouch 4G Slide the Galaxy replaced, my wife's old Galaxy S5 I used in the interims... LOL, I've got a working install. No, the "Remote: command not found" was returned from within.... Whether fastboot or adb, I forget now, but I was able to get the file to flash eventually, after reading your first post, but unfortunately the phone would not boot to it (nor Android). I thought I'd bricked it. Twice this happened. Each time, after about 5 minutes, it eventually booted to Android.
I flashed the recovery from the ROM in the link Blackview sent me and was able to boot their recovery just fine, so there's something in the TWRP that my particular phone doesn't like.
If you want to enter the recovery mode, you don't need to use fastboot, you can simply enter it by pressing Volume Up and Power buttons together for a couple of seconds when your phone is off.
When Boot Mode appears release all keys.
Click to expand...
Click to collapse
Thanks, I keep forgetting which keys to hold for recovery versus bootloader, so I use the adb command to be sure without having to keep a notepad nearby.
Clearly I don't do this as often as I used to.
(snip)
- flash the phone with the twrp recovery with "fastboot flash recovery recovery.img"
- reboot the phone in recovery mode with "fastboot boot recovery.img"
Normally the phone boot in twrp recovery.
Hope that will help you too.
Click to expand...
Click to collapse
Now that was something I haven't done since the T-Mobile G1 days. My understanding was that you CAN boot a recovery without flashing it first if you"fastboot boot {image filename}" but that didn't work for me either. I'm also assuming that the filename to flash can be anything because the device stores it to a partition, so it shouldn't have to be specifically "recovery-verified.img".
The recovery you have... Were you ever able to boot to it? If so, would you be willing to share a link to its download source, please?
I've got to run for a prior engagement, I'll check back later.
Thanks!
veronicadavis said:
I am too facing this problem. In case you got any solutions please let me know too.
Click to expand...
Click to collapse
I guess i find the reason why the modified recovery image won't boot.
I find an interesting information in a post of osm0sis (https://forum.xda-developers.com/showthread.php?t=2073775) were he say : "some newer MediaTek (MTK) devices use special image signing that adds a "BFBF" pre-header signature, so images will unpack/repack but most likely won't boot unless run through their internal signing tool."
After more search, i find an interesting publication (http://www.lieberbiber.de/2015/07/04/mediatek-details-partitions-and-preloader/) witch confirm that.
They say in conclusion of the publication :
"Yes, I can confirm that SignTool is able to add digital signature information to firmware images. Signed images have an additional header “BFBF” and some fluff which SP Flash Tool checks on a secure device. Apparently some manufacturers merely used the default MTK key for signing the images, making them no better off than a typical insecure MTK device."
So we have to find another way to install magisk to root it.
Root 9500/pro
Mine rooted already....you guys can check on 4pda russian forum
Note : do not use the 17.1 version of magisk there because after reboot the device will freeze if you resboot after twrp 1st install...instead flash 17.3+ or 18+ right after first install of twrp...
EDIT : dont mind the russian language in TWRP as you can change it to english once there
Yves596 said:
Hi everybody,
I try to root my Blackview BV9500 by installing first TWRP recovery. I use fastboot mode on a linux laptop to do that.
I successfully flash the twrp recovery image, but after that, the phone don't boot in recovery anymore.
It try to boot into recovery, but it reboot in normal mode a few second after.
I tried also with the cmd "fastboot boot recovery.img".
When i flash back the original recovery image, it work, i can boot the original recovery without any problem.
Does anyone have the problem?
Some one can help me to find a solution?
Click to expand...
Click to collapse
Hello I have same problem... Do you have that original recovery file? I don't have and I would like to get that back. Thanks.
DL this:
needrom. com/ download/bv9500pro- bv9500-root/ (delete spaces)
- Copy Magisk-v18.0.zip and disable_encryption_9500.zip to external SD-Card or OTG device
- backup your data from internal SD-Card
- do a factory reset and turn off phone without entering the setup guide after reboot, or wipe via recovery and power off
- Flash recovery.img using scatter.txt with SP Flash Tool
- boot into recovery with hold down vol + and power
- switch TWRP to your language and install Magisk-v18.0.zip and disable_encryption.zip
- reboot and update or install MagiskManager-v6.1.0.apk
Thanks to Jemmini from 4pda.ru
kanadali said:
DL this:
needrom. com/ download/bv9500pro- bv9500-root/ (delete spaces)
- Copy Magisk-v18.0.zip and disable_encryption_9500.zip to external SD-Card or OTG device
- backup your data from internal SD-Card
- do a factory reset and turn off phone without entering the setup guide after reboot, or wipe via recovery and power off
- Flash recovery.img using scatter.txt with SP Flash Tool
- boot into recovery with hold down vol + and power
- switch TWRP to your language and install Magisk-v18.0.zip and disable_encryption.zip
- reboot and update or install MagiskManager-v6.1.0.apk
Thanks to Jemmini from 4pda.ru
Click to expand...
Click to collapse
Thank you for your help and Jemmini help too, it work fine.
But on the firmware version 20180629.
Yves596 said:
Thank you for your help and Jemmini help too, it work fine.
But on the firmware version 20180629.
Click to expand...
Click to collapse
you can just download latest firmware and simply backup NVRAM etc with sp flash tool also flash with sp tool, you will have then working twrp with disabled encryption. there are tons of post regarding using sp flash tool on this forum
im using same phone and did these actions on first day and did not have any problem with twrp or magisk
Hi,
I've bought this phone in Pro version. I rooted my phone using needrom.com/download/bv9500pro-bv9500-root/ and adb after unlocking bootloader. Then I failed with errors. Then I used SPFlashTool in root mode with official 2018092919_s32v63c2k_jk_pro.rar rom (I don't find it anymore on the net but 1) I got it on Blackview official forum and 2) I have the file on my own PC) with format+Download and replace recovery with TWRP from Jemmini from 4pda.ru before flashing. OK.
Then I rooted again: format /data with TWRP, then install disable_encryption.zip, wipe dalvik, reboot on TWRP, then install Magisk, wipe dalvik, reboot normally.
Beware: TWRP is in Russian language at first boot, so to get it in English, first slide the first slide (allowing writing), then select 'Настройки', then the globe on top, then English, then 'Установитъ Язык'.
Hope this helps.
Then, this is my first rooted phone, so I plan to make a custom rom without Gapps (then maybe without Mediatek Ones and agold too) and remake all functionning with apps from Fdroid. Help needed on a manner of removing a system/vendor app properly. Help needed too to add V4A, as I could see max version supported is Nougat. I announce this here as my first post, but my project will be a full post. If someone want help please ask here or MP me
Note: an update of magisk is out (official 18.1), I installed it and my phone tells me a message that facial recognition was not working anymore then it only boots on TWRP... I reflashed it and my phone boots normally again. Wait and see...
Thanks to Jemmini from 4pda.ru again.
Bests Regards
nr0000000 said:
Hi,
I've bought this phone in Pro version. I rooted my phone using needrom.com/download/bv9500pro-bv9500-root/ and adb after unlocking bootloader. Then I failed with errors. Then I used SPFlashTool in root mode with official 2018092919_s32v63c2k_jk_pro.rar rom (I don't find it anymore on the net but 1) I got it on Blackview official forum and 2) I have the file on my own PC) with format+Download and replace recovery with TWRP from Jemmini from 4pda.ru before flashing. OK.
Then I rooted again: format /data with TWRP, then install disable_encryption.zip, wipe dalvik, reboot on TWRP, then install Magisk, wipe dalvik, reboot normally.
Beware: TWRP is in Russian language at first boot, so to get it in English, first slide the first slide (allowing writing), then select 'Настройки', then the globe on top, then English, then 'Установитъ Язык'.
Hope this helps.
Then, this is my first rooted phone, so I plan to make a custom rom without Gapps (then maybe without Mediatek Ones and agold too) and remake all functionning with apps from Fdroid. Help needed on a manner of removing a system/vendor app properly. Help needed too to add V4A, as I could see max version supported is Nougat. I announce this here as my first post, but my project will be a full post. If someone want help please ask here or MP me
Note: an update of magisk is out (official 18.1), I installed it and my phone tells me a message that facial recognition was not working anymore then it only boots on TWRP... I reflashed it and my phone boots normally again. Wait and see...
Thanks to Jemmini from 4pda.ru again.
Bests Regards
Click to expand...
Click to collapse
It'd be great to have another rom but I'm facing a problem with battery life. Basically mobile network standby drains 5000mah battery every day i turned off from developer option but still problem is there. I have checked every single post on Google but nobody has solution for this. U guys face this problem too?
kanadali said:
It'd be great to have another rom but I'm facing a problem with battery life. Basically mobile network standby drains 5000mah battery every day i turned off from developer option but still problem is there. I have checked every single post on Google but nobody has solution for this. U guys face this problem too?
Click to expand...
Click to collapse
New update has been released today. It solves some battery issues, but be very careful.
I installed it, having TWRP and now I'm stuck in TWRP. I've tried to wipe everything but I'm still in TWRP.
I'll try SPFlashTool ... hope it works.
Everything restored & updated.
Using SPFlashTool I flashed all files included in 2018092919_s32v63c2k_jk_pro.rar (including original recovery instead of TWRP).
After that, Android booted and then, using OTA, I updated to latest version.
Reflected_God said:
New update has been released today. It solves some battery issues, but be very careful.
I installed it, having TWRP and now I'm stuck in TWRP. I've tried to wipe everything but I'm still in TWRP.
I'll try SPFlashTool ... hope it works.
Click to expand...
Click to collapse
Could you please send me the link? Can't find it on blackview forum
kanadali said:
Could you please send me the link? Can't find it on blackview forum
Click to expand...
Click to collapse
The latest version is not on the forum. I installed via OTA.
But if you mean the previous firmware, there is one link on the blackview forum: http://bbs.blackview.hk/viewtopic.php?t=480235#p795494
SP Flash tools are well documented here: https://forum.xda-developers.com/showthread.php?t=1982587
And a complete list of blackview bv9500 / bv9500 pro files and instructions (in russian): https://4pda.ru/forum/index.php?showtopic=931296
Hope you find what you are looking for.
@kanadali,
for the moment I'm not facing battery drain because there is not simcard in it at this state of my modifications, sorry.
@Reflected_God,
I think this is the link I used, I use the 2018092919_s32v63c2k_jk_pro.rar rom for base.
For all others who faces big problems like me (facial recognition not working then reboot on twrp only, I could reflash my phone with SPFlashTool, the rom and twrp from Jemmini/4PDA in russian only (others don't work for me). I used Format + Download in root mode on Linux. Then format /data with TWRP, then install disable_encryption.zip, wipe dalvik, reboot on TWRP, then install Magisk, wipe dalvik, reboot normally. Do other things. To remove gapps I disabled/force stop it before remove with TWRP. Others apps I can't disable simply remove with TWRP. I test if I encounter bugs but none for the moment. If someone wants to know what I do I've made a LibreOffice Calc sheet log, which evolve when I have time
Hope this helps
Bests Regards
Need Files or a GOOD guide. bv9500 NOT PRO.
If someone could upload the exact files that they used, and the exact same steps, that would be great. Please mention what stock version you have and a link to the image if possible as well. I've followed numerous different guides, with multiple different rom versions, multiple different recovery imgs, used sp flash tool and adb/fastboot multiple times, tried making sure everything was unlocked before each try, have all the necessary drivers, and the closest I get to a functional twrp recovery is a green line that appears at the top of the boot screen before it reboots. Ive tried going to the source, the russian site, but all of the links are 404ed. if not for me, then it would be great to just have this all in one place. Thank you please future hero.
Please include exact program versions (ex SP Flash) as well if not zips of them. I am sorry to be asking so much in one post however I truly didn't know what else to do. And I am typically very good with my google fu xD
I currently have build number BV_BV9500_V1.0_20181026. That seems to matter I believe.
I second the notion.
I have the pro model. I have considered rooting it, but honestly, the phone works well enough as-is without root (for me). However, I'd LOVE to be able to play with different ROMs on this device **AS LONG AS I CAN MAINTAIN THE TWO-WAY UHF TRANSCEIVER FUNCTIONALITY** (i.e. not some "needs-a-network-of-some-kind" "walkie talkie app" like Zello but the real UHF two-way), and I'd LOVE the ability to play with the files associated with the radio to really explore the hardware's capabilities.
Unfortunately, this phone seems more popular in [North]eastern Asia than anywhere else so I don't think we're likely to get much on this forum regarding it unless and until BV become a popular name in the western hemisphere.