hello my asus zenfone 2 32gb ZE551ML wont boot... im stuck at the usb boot logo.... the problem is it doesnt response.
i have a tool called ( phone flash tool and intel phone flash tool )... but the problem is that i need these file for a complete succeed flash and bring my phone to life :
-OS DnX , OS Image , Modern...
they all bin files...
so if you can help me finding these files i will be greatfull...
many thx...
Hey !
Did you check if you have access to fastboot ?
BackDraft647 said:
Hey !
Did you check if you have access to fastboot ?
Click to expand...
Click to collapse
yes i have acces to it... but i have a tool that called intel phone flash tool lite.....so if i need these 3 files than i can reflash my zenfone 2 with new firmware
Related
Hi everybody,
i have a serious problem with an asus fonepad 7 me371mg model (k004) , basically after trying to flash a custom rom i bricked the phone and now i don't know how to take it back to life , as it is stuck un the usb logo.. no recovery , no droidboot.
i need your help
if someone have the same phone please help me to rebuild it from scratch:crying:
i think the internal partition table is damaged so it needs to be rebuilt.
i have a copy of the stock rom downloaded from the asus website but it's a zip file containing a .Raw file, i would like to extract the boot.img droidboot.img splash.bin system.bin and so on... unfortunately i don't know how to extract those files from the raw file.
Any information will be welcome cause i really don't know where to start from.
the device can only be detected as medfield devices bot i don't have the necessary files to flash the phone with xfstk or similar programs.
Thanks to everybody wanna help me
any budy help me
if your k004 stay at "no usb cable connected!" here is the solution
search and download this file "ME371MG_all_TW_user_V3.2.3-2.raw"
put it into sd card and insert it to k004
turn your k004 off
push "volume+" and "power" together > show "ASUS logo" STILL PUSH> show "no usb cable connected!" > release both button
push "volume+" and "volume-" together > show "DROIDBOOT" > select "SD DOWNLOAD"
choice the file "ME371MG_all_TW_user_V3.2.3-2.raw" > pray
wait till it done~
good luck
brainbooster said:
hi everybody,
i have a serious problem with an asus fonepad 7 me371mg model (k004) , basically after trying to flash a custom rom i bricked the phone and now i don't know how to take it back to life , as it is stuck un the usb logo.. No recovery , no droidboot.
I need your help
if someone have the same phone please help me to rebuild it from scratch:crying:
I think the internal partition table is damaged so it needs to be rebuilt.
I have a copy of the stock rom downloaded from the asus website but it's a zip file containing a .raw file, i would like to extract the boot.img droidboot.img splash.bin system.bin and so on... Unfortunately i don't know how to extract those files from the raw file.
Any information will be welcome cause i really don't know where to start from.
The device can only be detected as medfield devices bot i don't have the necessary files to flash the phone with xfstk or similar programs.
Thanks to everybody wanna help me
Click to expand...
Click to collapse
i have the same trouble.
Need fw dnx ifwi os dnx os image files for asus k004 me371mg
Hardware brick too!
need dnx ifwi os dnx os image files for asus k004 me371mg
My k01n has soft bricked
but it can enter droidboot
It has these options in droidboot :
REBOOT DROIDBOOT
REBOOT
FACTORY RESET
SD DOWNLOAD
POWER OFF
I change the stock firmware name from UL-K01N-WW-5.4.0.0-user.zip to ASUS_BUNDLE.zip and push into extsd and select SD DOWNLOAD but its not work .
Now .I need the raw firmware to use in AFT . AFT supports FE171CG Model .
I need,need,need raw file . Plz plz develop ver 5.4.0.0 and upload plz plz:crying::crying::crying::cryinglz
Help me help :crying:
I believe if we fix the partition for k01n then we can flash the firmware normally.
There is an instruction given in a Japanese forum: http://onehallyu.com/topic/294288-a-fluke-that-save-my-phone-fonepad-7fe171cg-from-hard-brick/
It seems possible to unbricked the device and repair the partition. I have tried the solution but it doesn't work. There is the same error mentioned by other people in that forum.
Anyone know how to solve this ? I'm willing to pay using paypal. I found no solution over the internet on how to fix the corrupt partition.
I tried to install CM13 .zip install finished ok, but after that the phone didnt boot no more.
result Zenfone 2 bricked, no recovery mode
I only have CWM temporary access, no adb.
So i tried to install stock firm from ext memory card the lastest from asus support , and the message was " can t install this package over newer version build.
I tried to flash recovery.img via fastboot and i got remote : permission denied.
Tried asus Flash tool and got permission denied , too.
Some places saids that its because its has lock pin or patern, but i cant remove it without adb access.
So i dont know what to do.
Now i read something about xFSTK, but i dont know what's the use of it.
Sorry for my poor Languaje.
Of course i prefer to have my cm13 working.
If anyone cant help me i ´ll be very greatfull
TKS
Did you unlock your phone?
Try flashing stock zip on ASUS site with temporary TWRP
Yes
HungNgocPhat said:
Did you unlock your phone?
Try flashing stock zip on ASUS site with temporary TWRP
Click to expand...
Click to collapse
It was not easy, lot of things falied.
But finally i could, Tks.
story I am zenfone2 ze551ml ( Z00A ) I am in lineage os and I update but it was stuck in recovery mode (I can"t normally I wipe system ,cache ,data and flash lineage again and I can't normally boot) I start to unbrick use xfstk method and then I am in stockrom
my problem There are some problem in my stockrom
1.sim1,2 can't detect like doesn't insert simcard
2.mybootloader serial is 0123456789abcdef but I can use normally
3.i can't unlockbootload with asus unlocktool or any method
4.I sideload adb but it boot in android lollipop like frist time I unbrick( i sideload android M)
i have no idea to do solve this problem . thank you for help
Hello everyone.
my Lenovo TAB3 Plus (tb3-x70f with an mt8161 chip) is bricked an i need some help.
I think i bricked it when i flashed the boot and recovery partitions via fastboot using the wrong images.
To resore it i tried using the sp flash tools and a firmware i found on the internet.
Sadly the flashing process failed with an error from the sp flash tools:
BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
The chioce of firmwares for the tablet is limited and i thought maybe i got the wrong ones.
So i decided to create my own backup from a new, still operating TAB3 Plus.
There for i followed a tutorial on forum.hovatek.com/thread-21970
But this didnt work neither. Sp flash tool failed with BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032).
I installed like every Mediatek driver i could find, tried different usb-ports (some usb3 and some usb2) and cables, operating systems (Windows 10, 7 and ubuntu) and versions of the sp flash tools. Nothing helped.
I got several questions:
What is the DRAM?
Why is the sp flash tool not able to enable it?
Was anyone able to use the sp flash tool with an mt8161?
What might i have done wrong?
Are there other tools i should try?
Thank you all for your comments in advance!
Mo