Does anyone have a flashable ATT E980 20h baseband modem? or Can someone extract the modem form their device?
I have a ATT E980 but I don't use ATT network so I don't get the updates.
thanks much
Related
HI all,
I have the e977 from Venezuela, right now working with CM10.2, but i want to now if i install the KDZ version for EUROPE OPEN will work just fine?
Thanks, and about the LTE band I don't have a problem because right now is not supported in my country
yes, you can install KDZ for E975 without problems
Hi,
I have F400K LG G3 device running Cloudy 2.5. It runs great except that I don't get LTE, only gets HSPA (I am in US on AT&T).
I used to get LTE until 2.3 version.
Can somebody please post a flashable zip of the attached F400 modem from 2.3 as I do not know how to make it.
Modem: https://mega.co.nz/#!Ukcl1IpK!lr36cs_JZDDWSRrg8mF-xf3Z7jn6BIlYT2ZYByZeosg
Thanks for all your help.
Hi, Just wanted to ask, somebody might know around here..
Using LG flash tool
phone LgG3 d852 Telus /// using 6.0 version D85230b
Goal: I want to flash 4.4.2 stock .tot (LGG3/D852/Bell/BIN_LGD852AT-01-V10b-302-610-JUL-14-2014-0.zip) over the existing 6.0 stock, in order to then flash it again with 4.4.2 (BIN_LGD852GAT-01-V10c-302-500-JUL-15-2014-0 (1).zip) to enable the AWS band / 1700Mhz enables for use with WIND mobile......THEN I would flash it with D852G.kdz or ,.tot to get it back to lollipop or marshmallow OS , but the D852G version to have the AWS frequency band enabled on it!!!!!
I am getting MODEL INFO CHECK FAIL, it does not matter, if I use the LGD852AT or LGD852GAT .tot files!!!
Please, advise.. anybody tried this method with LGG3 D852 Telus/Koodo with 6.0 stock installed on it??
THANK YOU
replace hxxp with http below
hxxp://s272.photobucket.com/user/solamentej/media/Android/LG%20flash%20tool%20fail_zps4sw3qstu.jpg.html
Try LGUP tool. it might help you
http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
Jameshere said:
Hi, Just wanted to ask, somebody might know around here..
Using LG flash tool
phone LgG3 d852 Telus /// using 6.0 version D85230b
Goal: I want to flash 4.4.2 stock .tot (LGG3/D852/Bell/BIN_LGD852AT-01-V10b-302-610-JUL-14-2014-0.zip) over the existing 6.0 stock, in order to then flash it again with 4.4.2 (BIN_LGD852GAT-01-V10c-302-500-JUL-15-2014-0 (1).zip) to enable the AWS band / 1700Mhz enables for use with WIND mobile......THEN I would flash it with D852G.kdz or ,.tot to get it back to lollipop or marshmallow OS , but the D852G version to have the AWS frequency band enabled on it!!!!!
I am getting MODEL INFO CHECK FAIL, it does not matter, if I use the LGD852AT or LGD852GAT .tot files!!!
Please, advise.. anybody tried this method with LGG3 D852 Telus/Koodo with 6.0 stock installed on it??
THANK YOU
replace hxxp with http below
hxxp://s272.photobucket.com/user/solamentej/media/Android/LG%20flash%20tool%20fail_zps4sw3qstu.jpg.html
Click to expand...
Click to collapse
Moved post to LgG3 Q&A help
Thank you
GTRanushka said:
Try LGUP tool. it might help you
http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
Click to expand...
Click to collapse
Thank you will try
Hi, Just wanted to ask, somebody might know around here..
Using LG flash tool
phone LgG3 d852 Telus /// using 6.0 version D85230b
Goal: I want to flash 4.4.2 stock .tot (LGG3/D852/Bell/BIN_LGD852AT-01-V10b-302-610-JUL-14-2014-0.zip) over the existing 6.0 stock, in order to then flash it again with 4.4.2 (BIN_LGD852GAT-01-V10c-302-500-JUL-15-2014-0 (1).zip) to enable the AWS band / 1700Mhz enables for use with WIND mobile......THEN I would flash it with D852G.kdz or ,.tot to get it back to lollipop or marshmallow OS , but the D852G version to have the AWS frequency band enabled on it!!!!!
I am getting MODEL INFO CHECK FAIL, it does not matter, if I use the LGD852AT or LGD852GAT .tot files!!!
Please, advise.. anybody tried this method with LGG3 D852 Telus/Koodo with 6.0 stock installed on it??
THANK YOU
replace hxxp with http below
hxxp://s272.photobucket.com/user/solamentej/media/Android/LG%20flash%20tool%20fail_zps4sw3qstu.jpg.html
Jameshere said:
Hi, Just wanted to ask, somebody might know around here..
Using LG flash tool
phone LgG3 d852 Telus /// using 6.0 version D85230b
Goal: I want to flash 4.4.2 stock .tot (LGG3/D852/Bell/BIN_LGD852AT-01-V10b-302-610-JUL-14-2014-0.zip) over the existing 6.0 stock, in order to then flash it again with 4.4.2 (BIN_LGD852GAT-01-V10c-302-500-JUL-15-2014-0 (1).zip) to enable the AWS band / 1700Mhz enables for use with WIND mobile......THEN I would flash it with D852G.kdz or ,.tot to get it back to lollipop or marshmallow OS , but the D852G version to have the AWS frequency band enabled on it!!!!!
I am getting MODEL INFO CHECK FAIL, it does not matter, if I use the LGD852AT or LGD852GAT .tot files!!!
Please, advise.. anybody tried this method with LGG3 D852 Telus/Koodo with 6.0 stock installed on it??
THANK YOU
replace hxxp with http below
hxxp://s272.photobucket.com/user/solamentej/media/Android/LG%20flash%20tool%20fail_zps4sw3qstu.jpg.html
Click to expand...
Click to collapse
Please check the .DLL file you are using!!!
Grazie a Aaron......for those who wish to complete a similar task of enabling of AWS frequency band on LgG3 D852>> try to use LGUP tool and appropriate .kdz files for your phone model.. I tried it.... seems to work fine.. my D852 Bell now working on Wind Mobile frequencies..
the area coverage of WIND is much smaller than BELL.. but then.. the bill is smaller too... it depends on how and where you use your phone!!
Prices of mobile phone plans are ridiculous in Canada.
Jameshere said:
Grazie a Aaron......for those who wish to complete a similar task of enabling of AWS frequency band on LgG3 D852>> try to use LGUP tool and appropriate .kdz files for your phone model.. I tried it.... seems to work fine.. my D852 Bell now working on Wind Mobile frequencies..
the area coverage of WIND is much smaller than BELL.. but then.. the bill is smaller too... it depends on how and where you use your phone!!
Prices of mobile phone plans are ridiculous in Canada.
Click to expand...
Click to collapse
Hey Jameshere,
What kdz file did you use, was it D852G.kdz? Did you have to downgrade back to 4.4.2 first and then to lollipop or did you go straight from Marshmellow 6.0 to Lollipop using the LGUP tool? I am trying to enable AWS for Wind as well with a Fido LG G3. Thanks!
I've been looking for the stock Android Lollipop firmware for the H812 version of the LG G4, but had no results.. Can anyone provide a link so I can downgrade my phone back to Android Lollipop! Thanks!
Also, my phone is from Fido, so I would need the stock firmware for Fido!
LG G4 - Stock Fido Firmware
I've been trying to find the same stock image for my Fido phone, with no luck. Hoping someone has the .kdz file out there. Thanks!