XDA:DevDB Information
[Rom] Renegade (DISCONTINUED) (G920P)(OJ7-V1)(5.1.1){Aroma}, ROM for the Sprint Samsung Galaxy S6
Contributors
wildjeep, joshwaaa, nyfl2004, ram9200
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: OF7, OFE, OGA, OH1, OI1, OJ7
Version Information
Status: Stable
Stable Release Date: 2015-08-03
Created 2015-08-06
Last Updated 2016-09-18
If you're having issues, PLEASE ask yourself these questions before posting
What stock Firmware version are you running?(OF7, OFE, OGA, OH1, OI1)
Which version of this Rom did you flash?
Did you follow the instructions in the OP to flash?
Are you sure that "DATA" WASN'T Wiped when flashing?
Are you using Xposed?
Have you checked Post#2 to see if any answers were already posted?
1-Why is my phone now showing as a G925P(Edge) Phone?
------*Clarity* This Rom was cooked up by @ram9200 for the G925P device and has been confirmed to work as a custom Rom on your G920P devices. So it will now show up as a 925P in certain info fields.
Since he has integrated our edge Kernel into the Rom, that's why your last installation step to flash the 920P Kernel. I'm not 100% sure what all edge features you will be able to utilize. Edge features are not promoted to work in the OP for the time being, till they can be confirmed working. Only reported features i've seen so far was from @JoeFCaputo113 in post 23
2-Is the red "RECOVERY is NOT SEANDROID ENFORCING" text on boot screen normal?
------*Yes* Consider this text to now be normal
3-Is the red "KERNEL is NOT SEANDROID ENFORCING" text on boot screen normal?
------*Yes* Consider this text to now be normal
4-Recent Apps and Back button do not work
------*Fix* Flash the G920P Kernel again
5-Red text in the top left of boot screen saying "Custom Binary blocked by FRP Lock." and in Boot loop.
------*Fix* Start over @ step 3 of the instructions and unlock Bootloader this time
6-Inverted Touch Screen X Axis After Flashing (Reversed Screen) {Edge Root method was flashed}
------*Fix* Only if the two lines from top are displaying different values for PARTS and PHONE firmware then you would
1- Dial *#2663# in the dialer
2- Click on TSP FW UPDATE (General) it shouldn't need a reboot
3- Make sure PARTS and PHONE show the same values
4- Inverted Touch Screen Fixed
7-Phone boots up, but no service {This Rom was flashed on a 5.0.2 device}
------*Fix* Start over @ step 1 of the instructions
8-Root access seems to be gone after the Rom installation.
------*Fix* Downloading Chainfires' SU again from the Play store HERE
9-Unauthorized actions have been detected message after flash
------*Fix* Freeze securitylogagent 4.x.x with TB after install if you see it.
10-Software version DOESN'T match the Rom version (Build Number) ((Settings-->About Device))
------*Fix* Start over @ step 3 of the instructions.
11-If you've flashed a custom Rom and now are missing the Hotspot, Roaming, Wifi calling options in Settings
------*Fix* Start over @ step 3 of the instructions and be sure NOT to wipe Data this time
------*Alternate Fix* You can restore "Only Data" with TWRP from a previous TWRP backup
------*Alternate Fix* You can reset factory data by dialing ##72786#
12-How to activate Native Hotspot
------*Fix* Download and install this APK. PM me with questions HERE
13-If you've flashed a custom Rom and now are getting an E: Error executing updater binary in zip ' /sdcard/Rom name.zip FAILED in TWRP
------*Fix* Start over @ step 3 of the instructions and be sure to follow each step
14-How do I get Netflix to work?
------*Method*
1-Rename or delete this file. /system/lib/liboemcrypto.so
2-Open the App and enjoy your shows :victory:
15-How do I get "Android Pay" to work?
------*Method* Download Link
1-Installed the app, but do not open it to configure.
2-Instead go to SuperSU, Settings, then unticked Enable SuperSU.
3-Go back to Android Pay and added your credit card info.
4-Now return to SuperSU, re-ticked the box.
16-How do I modify the kernel?
------*Method* Only attempt if you know what you're doing
App for editing these settings is currently in development
1-Look in system folder after install of kernel for unikernel.prop
2-Turbo=true or false
3-Interactive=battery or performance
4-Scheduler=cfq (noop deadline fiops bfq) I would stick with cfq
17-Why did I get a message in TWRP saying that you appear not to be rooted?
------*Method* SU binary has been added to kernel
*-When you see this message... Ignore it
*-Click the do not install button
*-Otherwise you will have to update the SU binary once you load the rom
15-Why is my phone not going into Deep Sleep?
------*Fix* Freeze or Disable with Titanium Backup for now Download Link Uninstall your original Visual Voicemail app and flash this one (Deep Sleep = Better battery Life)
Thanks!
Another cool option!
The network speed indicator gets in the way of the center clock. Is there a zip to either revert back to default or just move the clock back to the right or just remove the indicator lol? Also what is the csc fix?
shawn.irwin said:
The network speed indicator gets in the way of the center clock. Is there a zip to either revert back to default or just move the clock back to the right or just remove the indicator lol? Also what is the csc fix?
Click to expand...
Click to collapse
The Stock system ui will put the indicator and clock back to stock.
Csc fix:=Reverts "Disable home to wake mod"
Since I did the volume fix and fixed permissions my gmail app won't work and just says unknown issue with Google play services.
shawn.irwin said:
Since I did the volume fix and fixed permissions my gmail app won't work and just says unknown issue with Google play services.
Click to expand...
Click to collapse
Try the "Play services updated apk"
Or flash V3.1
Neither of my touch keys will not work or light up now? (menu and back) any idea?
phelony said:
Neither of my touch keys will not work or light up now? (menu and back) any idea?
Click to expand...
Click to collapse
Those are symptoms of not flashing the G920P Kernel
Edit:.. Text of "(Remember to flash your G920P Kernel after)" Changed to Red
Sent from my SM-G925P
i didnt see anywhere where i was supposed to flash a kernel.
i was coming from twisted project.
Do you have a kernel i can flash in TWRP? or can you link a kernel I can odin.
will i need to reset or can i just flash the kernel and be good.
Saafir said:
Is there a problem with the threads labeled [kernel]?
Click to expand...
Click to collapse
Lol :good:
---------- Post added at 12:38 PM ---------- Previous post was at 12:28 PM ----------
wildjeep said:
Try the "Play services updated apk"
Or flash V3.1
Click to expand...
Click to collapse
So I flashed v3.1 but still am having the issue. I installed the apk too. I'm guessing the bottom line is don't fix permissions on this Rom on the 920P. And since that seems to be a requirement for the fixes to work, those are not options either for us. I'll try reflashing v3 then 3.1. Seems like that should fix my issue.
Anyone have an MD5 for 3.1? Also is everyone's fingerprint scanner n private mode working? Thanks!
Wiping data required? So we have to erase absolutely everything (even pics and media) on the phone before we flash? Regardless, thanks for the rom!
edit - talking about coming from 5.1.1
fachadick said:
Wiping data required? So we have to erase absolutely everything (even pics and media) on the phone before we flash? Regardless, thanks for the rom!
Click to expand...
Click to collapse
Not necessary. I dirty flash new versions, but as you probably know, A clean flash is always recommended. Roll the dice if you're comfortable.
:good:
Here to report everything is working fantastic!! Everything works right out of the box. No issues yet.... remember to flash a kernel first guys (for 920P) before you report any issues!
Saafir said:
Is there a problem with the threads labeled [kernel]?
Click to expand...
Click to collapse
Well considering this kernel was working on Twisted project and the OP did not specify a requirement of a specific kernel, and I the kernel i had worked ok on twisted
I wanted to know if this required a specific kernel.
Also I wanted to know if anyone had a recovery flashable version as my video card took a **** yesterday and it's gonna be a couple days before newegg delivers my new one.
But in typical autistic 10 year old fashion, rather than be actually helpful you just had to be a condescending prick.
I bet that works out real well for you offline.
shawn.irwin said:
Lol :good:
---------- Post added at 12:38 PM ---------- Previous post was at 12:28 PM ----------
So I flashed v3.1 but still am having the issue. I installed the apk too. I'm guessing the bottom line is don't fix permissions on this Rom on the 920P. And since that seems to be a requirement for the fixes to work, those are not options either for us. I'll try reflashing v3 then 3.1. Seems like that should fix my issue.
Click to expand...
Click to collapse
And here you are as well, you had a chance to clarify.
Instead you doubled down on being a little **** too.
Congratulations. You and your autistic friend can sit around and discuss the ramifications on windows 10 telemetry.
as for your problem....
I was able to fix this by rolling back a google play services version and then updating by the way. Took a few trys but it stuck.
phelony said:
Well considering this kernel was working on Twisted project and the OP did not specify a requirement of a specific kernel, and I the kernel i had worked ok on twisted
I wanted to know if this required a specific kernel.
Also I wanted to know if anyone had a recovery flashable version as my video card took a **** yesterday and it's gonna be a couple days before newegg delivers my new one.
But in typical autistic 10 year old fashion, rather than be actually helpful you just had to be a condescending prick.
I bet that works out real well for you offline.
And here you are as well, you had a chance to clarify.
Instead you doubled down on being a little **** too.
Congratulations. You and your autistic friend can sit around and discuss the ramifications on windows 10 telemetry.
as for your problem....
I was able to fix this by rolling back a google play services version and then updating by the way. Took a few trys but it stuck.
Click to expand...
Click to collapse
Dude are you serious? YOUUU sound/look like 5yr old here. Stop being childish and take this crap somewhere else. This is for development purposes, not childish BS.
Glad you fixed the problem you were having though :good:
@phelony
I sincerely apologize if I've done anything to offend you. Not my intentions at all.
The reason you need to flash a G920P Kernel after is that as stated in the following change log. The Rom already includes a Kernel, which is for the G925P .
I'm not familiar enough with the G920P to recommend a Kernel . If your device has one that is highly used, I can add it to the OP.
OFE-deodexed v3.1
Added libs from G925PUPU2BOGA to fix lib Stagefright hack
Disable increasing ringer-assuming this was happening.
Removed carrieriq
Build.Prop tweaks for media added
Added unikernel v6 0001- thanks @djvoleur
Good work on the rolling back of the google play services version :good:
JoeFCaputo113 said:
Here to report everything is working fantastic!! Everything works right out of the box. No issues yet.... remember to flash a kernel first guys (for 920P) before you report any issues!
Click to expand...
Click to collapse
Did you dirty flash? If not, what did you wipe? tia
Related
TeamDevDigitelV3 5.0.1 BOB7
Odexed/Deodexed
Stockish Debloated, Rooted, Optimized, Removed Setup, Quickboot, Minimalist
Hotspot ect..
(Deodexed is Revision 2 and up)
Stock Touchwiz Android L 5.0.1
@tx_dbs_tx ( finally got everything sorted with stock kernel/su not being installed correctly awsome work.)
All of the bloat has been removed but all the samsung features/applications have remained intact (Spen ect)
All apps removed can be returned from Playstore as a user app.
WARNING I AM NOT RESPONSIBLE FOR ANYTHING THAT YOU CHOOSE TO DO TO YOUR DEVICE.
●If you have Private mode or Fingerprints setup, always remove prior to making a backup, it will result in the saved info getting curupt●
**********************************
○○○INSTRUCTIONS○○○
***********************************
YOU MUST BE ON THE 5.0 FIRMWARE THIS WILL INSTALL STOCK BOB7 KERNEL.
1.) Suggested that each build is always flashed after a full wipe has been completed. If you have bugs, issues and didnt wipe then you now know why.
*Please only flash roms with ample charge to support a full boot and set-up.*
2.)Flash the provided zip and wait for it to complete. I always flash from the sd card because i wipe my internal storage each time i flash a build.
3.) Once completed reboot system and wait for it to present the home scren. It takes aprox. 3-5 minutes to boot.
4. Update apps and set up phone as usual. Enjoy and provide feedback
¤¤¤¤¤¤¤¤Known Bugs:¤¤¤¤¤¤¤¤¤
1)N/a
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤
I will be including over time update zips to help you modify the system.
Please see post #2 containing flashable zips.
And as usual please hit thanks button to keep the development coming motivation to continue updates.
#############################
Rom Downloads
#############################
[BOB7 Odexed]
VERSION 3 Final :
https://www.androidfilehost.com/?fid=95916177934547089
VERSION 2:
https://www.androidfilehost.com/?fid=95916177934542988
VERSION 1:
https://www.androidfilehost.com/?fid=95916177934542949
[BOB7 DeOdexed]
VERSION 2:
https://www.androidfilehost.com/?fid=95916177934543301
♤ThankYou Millerboy3 for doing this and uploading it!♤
ABOUT:
Version: 5.0.1 Lolipop
Firmware: N910PVPU1BOB7
Release Date: 3/27/15
Devs : Please feel free to use this base, at this point most/all bugs have been cleared. Please just give credit when due there is no permission needed to use.
(THANK YOU)
#2
$$$$$$$$ FLASHABLE ZIPS $$$$$$$$$
Private Mode Fix (N/a build 2 and up)
http://www.mediafire.com/download/h41ldmcmjv2si2k/PrivateModFix.zip
Volume Adjustment
10% increase
https://www.androidfilehost.com/?fid=95916177934543062
Stock
https://www.androidfilehost.com/?fid=95916177934543063
Toggles
Add Data Toggle
https://www.androidfilehost.com/?fid=95916177934543064
Toggles Exploded
"Don't expect them all working yet"
https://www.androidfilehost.com/?fid=95916177934543065
MobileData/Toolbox toggles
https://www.androidfilehost.com/?fid=95916177934547113
○●○●○●○●○●○●○●○●○●○●○●○●○●○●○●
Hotspot Mod/Remove Volume Warnings / Themes Ect:
** Be Aware with 5.0 in its infancy the mods all may not be avaliable yet as a full flashable zip, alot of them just need restructured for the 5.0 filesystem and can be manualy moved over to 5.0**
Please see here :
http://forum.xda-developers.com/showthread.php?p=57124981
[ROM] [Sprint Hybrid X-Series]
Thanks & Resources
*
*
*
*Millerboy3
*MasterZen88
*ArchiKitchen
*TekHd
*LMMT
*tx_dbs_tx
*AxAtAx
*
*
Mine
Team DevDigitel said:
Flashables
Click to expand...
Click to collapse
you can include these to help those coming directly from NK2
BOB7 Bootloader/Modem ODIN Flashable Tars
Awesome!!!!
Flashing ael kernel fixes Su prompt issues. So I would assume it's something kernel related. How this helps to get the issue fixed
Team DevDigitel said:
I'm just waiting for the offical img.)
This is a custom build off of the
5.0.1 BOB7 Touchwiz Firmware 5.0 tar provided by @millerboy3 , ill be using this base until the official image is available.
Click to expand...
Click to collapse
The official TAR is out: http://forum.xda-developers.com/showthread.php?p=59483780
Exciting times[emoji2]
Yeah i seen thanks..
I already dl it..just too tired to mess with tonight.. was slow today and built this while at work and just had to put everything online before i called it a night
Been running your 4.4 ROM as my go to after messing with other ROMs. Thank you for your work and look forward to a polished release to have when things get buggy elsewhere. Keep it up
Im not sure whats happening , but I flashed the bootloader and modem manually and wiped in TWRP, but it would not boot up, not sure what's causing this? help
treo4life said:
Im not sure whats happening , but I flashed the bootloader and modem manually and wiped in TWRP, but it would not boot up, not sure what's causing this? help
Click to expand...
Click to collapse
Try to reflash after wipe.. or flash rom then Kernel after rom flash.
I havent had anyone report it is booting for them or not. .
Cant see the captcha on media fire. Even if i put the browser on desktop mode, the captcha shows up and when i type it in and click on authorize download it takes me back to mobile view
infamouzwt said:
Cant see the captcha on media fire. Even if i put the browser on desktop mode, the captcha shows up and when i type it in and click on authorize download it takes me back to mobile view
Click to expand...
Click to collapse
Do you have ad away or other ad blocker enabled? I would suggest dl using operah browser or chrome..
Sorry for captcha on mediafire.. ill get the next versions on afh
I deodex'd this. Seems to work well so far, aside from that given FC from time to time.
millerboy3 said:
I deodex'd this. Seems to work well so far, aside from that given FC from time to time.
Click to expand...
Click to collapse
If you could toss it onto afh ect and send a link id be happy to include..
I set kitchen up from the offical tar but im just busy as f right now to do anything atm. Glad to hear it flashed well for you
Team DevDigitel said:
If you could toss it onto afh ect and send a link id be happy to include..
I set kitchen up from the offical tar but im just busy as f right now to do anything atm. Glad to hear it flashed well for you
Click to expand...
Click to collapse
Just doing some general testing first and I'll be sure to link it for you.
Team DevDigitel said:
Do you have ad away or other ad blocker enabled? I would suggest dl using operah browser or chrome..
Sorry for captcha on mediafire.. ill get the next versions on afh
Click to expand...
Click to collapse
I used opera browser and when i click on download and choose the path where to save, it says failed right away
infamouzwt said:
I used opera browser and when i click on download and choose the path where to save, it says failed right away
Click to expand...
Click to collapse
Mirror:
https://www.androidfilehost.com/?fid=95916177934542949
Team DevDigitel said:
Mirror:
https://www.androidfilehost.com/?fid=95916177934542949
Click to expand...
Click to collapse
Thank you very much. Cant wait to try it out
I know mastergrillo already has a thread similar to this, but I didn't see an option that had everything I wanted. I'm just sharing the version I made for myself in case anyone needs it. Flash at your own risk.
This is simply a stock Samsung Lollipop 5.0 rom (N900TUVUFOB6) for the T-Mobile Galaxy Note 3 (N900T) that includes the following features:
Features:
Rooted (SuperSU and Busybox included)
KNOX removed (it will still trip KNOX 0x1, but it won't annoy you about a security issue)
Deodexed (makes the system easier to MOD and is currently required for installing the Xposed framework)
Zipaligned (optimizes apk alignment to reduce memory usage)
Rom based /etc/init.d script support (doesn't require a kernel with init.d support, but it will still work fine if your kernel does [scripts shouldn't get run twice])
Untouched stock Samsung kernel
It was not debloated because what's bloat to me may be useful to someone else and vice versa. You can easily debloat it yourself using Titanium Backup or a debloating script.
Nothing else was touched, and all T-Mobile based features like wifi calling work fine.
Issues:
No issues that I know of.
Installation instructions
Note: This rom does not include the lollipop bootloader or modem, so it's recommended to update both of those first if you haven't already.
Do a full backup
Flash with TWRP recovery (other custom recoveries may work, but it hasn't been tested)
Wipe dalvik cache, system, data, and cache partitions before installing. You probably don't have to wipe the data partition if you're coming from the original Samsung Lollipop 5.0 (this will preserve your apps and settings), but I haven't tested it.
May take 10 to 20 minutes for first boot (it will stay on the t-mobile logo for a while). Just be patient.
Stagefright vulnerability fix
There's a patch available to fix the stagefright vulnerabilities (credit goes to mastergrillo for this). The patch can be installed with TWRP immediately after installing the rom (you don't need to reboot first).
Other MODs that are compatible with this ROM (not included)
External sdcard write fix (allows apps to write to the external sdcard)
Android 6.0 Marshmallow boot animation (here's a video of what it looks like)
Xposed framework
Note: Xposed is still in alpha status for Lollipop, so some modules may still have issues.
First install XposedInstaller_3.0_alpha4.apk (or newer) from here
And then flash xposed-v75-sdk21-arm-arter97-snapdragon.zip (or newer) from here using TWRP. The important parts of the filename that should stay the same are "sdk21" (for Lollipop 5.0.x) and "snapdragon" (for our chipset).
If you have any questions or issues with Xposed, please ask them in arter97's Xposed thread.
Download ROM
XDA:DevDB Information
N900TUVUFOB6-frequentc, ROM for the T-Mobile Samsung Galaxy Note 3
Contributors
frequentc
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2015-10-02
Created 2015-10-01
Last Updated 2015-11-17
Reserved
1st yes
Downloading now.
I'm a fan of straight stock look. I'll came back with any more input.
Xposed is a new idea with lollipop but I'll give it a go.
Thanks!
BOOM, shalakalaka
dirtybudha said:
Downloading now.
I'm a fan of straight stock look. I'll came back with any more input.
Xposed is a new idea with lollipop but I'll give it a go.
Thanks!
BOOM, shalakalaka
Click to expand...
Click to collapse
Here's arter97's version of xposed that will work with Samsung deodexed touchwiz roms: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
You tha man!
I followed the link in the OP, thanks.
frequentc said:
Here's arter97's version of xposed that will work with Samsung deodexed touchwiz roms: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
Click to expand...
Click to collapse
UPDATE: I seem to got be getting data after installation. I've installed twice. I cannot just say this is bogus, but I'm just sharing that I can't get data with this ROM in the OP.
dirtybudha said:
UPDATE: I seem to [not] be getting data after installation. I've installed twice. I cannot just say this is bogus, but I'l just sharing that I can't get data with this ROM in the OP.
Click to expand...
Click to collapse
@dirtybudha
The data service problem has been fixed in version 1.1 (OP updated with link).
The bug happened because I forgot to include the CSC files from the original Samsung rom. I didn't notice the bug because I manually flashed the CSC files after flashing the rom, which fixed the problem for me.
Anyways, I reflashed the new version myself using the flashing instructions in the OP to verify that it was corrected. It should work fine now.
..
Thanks! Will flash and report back.
Update: Data works! Bluetooth won't turn on. I'm sending a pm with a logcat.
BOOM, shalakalaka
dirtybudha said:
Update: Data works! Bluetooth won't turn on. I'm sending a pm with a logcat.
Click to expand...
Click to collapse
Hey, I just tested bluetooth on my phone, but I can't replicate your problem. It's working fine for me. You may want to try clearing the caches if you haven't already. I did a full wipe (system, data, cache, and dalvik cache) when flashing version 1.1.
How did you flash version 1.1? Was it a clean install? Can you please tell me what you wiped? Have you tried this bluetooth device on the stock lollipop before?
If anyone else has tried bluetooth, please post your results.
Thanks
And can you please tell me the device you tried to pair with the phone, or would bluetooth just not turn on at all when you tried to enable it?
Edit:
btw.. are you running the lollipop bootloader and modem?
It was a clean install, wiped caches, data, system. I do this ever time i flag a ROM. I do have the bootloader and modem for Lollipop. I'm currently running stock Lollipop,and have been for a while.
I was trying to pair my Asus Zenwatch. Problem is that the Bluetooth Jay wouldn't turn on at all.
Let me try again. Could have been a bad a download or the moon wasn't in the right place last night.
Update: it was a bad download, apparently. Seems like everything is working so far.
About to backup everything and flash Xposed.
BOOM, shalakalaka
I've actually been looking for exactly this. Being that it is bone stock is it safe to assume that Wifi calling and everything else works?
If you read through the OP you will see that this ROM is almost entirely stock for the T-Mobile Note 3. That means WiFi Calling works. I just turned it on and everything is in order.
RelayTech said:
I've actually been looking for exactly this. Being that it is bone stock is it safe to assume that Wifi calling and everything else works?
Click to expand...
Click to collapse
Xposed took some thinking, all anyone needs to do is flash the Alpha 4 file. So far it shows that it is up and running. Although my multi window manager wasn't able to work, it may not be compatible with lollipop. I'll have to go through and test some of the apps later. I just left the FC Dallas soccer game and I'm headed home to watch the Dallas Cowboys play.
Great work! I, as well as the community, appreciate your contribution.
BOOM, shalakalaka
dirtybudha said:
Xposed took some thinking, all anyone needs to do is flash the Alpha 4 file. So far it shows that it is up and running. Although my multi window manager wasn't able to work, it may not be compatible with lollipop.
Click to expand...
Click to collapse
I believe you also have to install arter97's xposed-v71-sdk21-arm-arter97-V6-snapdragon.zip in order for xposed to work properly on Samsung roms.
I thought that was already done? What was done to make this ROM Xposed ready?
frequentc said:
I believe you also have to install arter97's xposed-v71-sdk21-arm-arter97-V6-snapdragon.zip in order for xposed to work properly on Samsung roms.
Click to expand...
Click to collapse
BOOM, shalakalaka
dirtybudha said:
I thought that was already done? What was done to make this ROM Xposed ready?
Click to expand...
Click to collapse
Nothing was done except deodexing it, which is what is needed for arter97's xposed files to work. When I mentioned that you'd still need to install arter97's stuff, I thought that would be clear (but I may have added that after you downloaded it).
I didn't want to include arter97's xposed files in case some people didn't want it, it's still in alpha status stability wise and gets updated often, and it can also easily be added by flashing arter97's latest file. I simply mentioned xposed ready, so people would know that it could be installed.
I've updated the OP to make it clearer.
Touche.
Well it worked great!
frequentc said:
Nothing was done except deodexing it, which is what is needed for arter97's xposed files to work. When I mentioned that you'd still need to install arter97's stuff, I thought that would be clear (but I may have added that after you downloaded it).
I didn't want to include arter97's xposed files in case some people didn't want it, it's still in alpha status stability wise and gets updated often, and it can also easily be added by flashing arter97's latest file. I simply mentioned xposed ready, so people would know that it could be installed.
I've updated the OP to make it clearer.
Click to expand...
Click to collapse
BOOM, shalakalaka
hey i flashed your rom and everything is working good for now, its just i cant find xposed framework. i get to one thread, it leads me to some other post, that post leads to other thread and so on, and im losing my mind.
pls explain me like to a 6yr child what should i do to install framework or put direct links
Ultimate Note7 Hybrid aka UN7The next generation ROM for the Sprint Galaxy Note 4!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About ROMWarning: This ROM is ONLY for the Sprint SM-N910P!!! DO NOT FLASH THIS ROM ON ANY OTHER MODEL!!! If you do then please don't ask for help in this thread. You are on your own! Know what you are doing before flashing and modifying your phone!!! Yes this is an amazing rom BUT it is for the Sprint network model SM-N910P ONLY!!! Please resist the urge to flash this rom on any other model. This is your fair warning.
Initial Release: v1.0
This is a "stock" build with no custom mods other than unlocked native hotspot
Fully deodexed framework and system apps
I built the entire rom and made underhood adjustments as needed. There is way too much work to list here!!!
Root by @Chainfire
Busybox
Init.d support
100% Sprint Note 7 framework and system apps.
100% Sprint Note 4 system files for hardware & feature dependecies.
This rom is guaranteed to bring new life into your Note 4 and make you love it again!
Software version: N930PVPU1APGC
Kernel: Official Samsung N910PVPS4DPJ1 modified to support Samsung UX software
FeaturesThis is a mostly stock rom running the stock Samsung kernel. Although there are no major problems in the rom, I do plan to continue making fine adjustments in order to make this rom as perfect as I can. However, it is a port and many things have been done precisely for the smoothest and most trouble-free operation. Expect minimal issues. Currently this rom is amazing. In the future it will be even more amazing. The ROM includes all working features of the Sprint Note 7 software version N930PVPU1APGC excluding items listed below.
(other than iris and fingerprint scanner and fm radio)
All stock Samsung and Google apps as well as the main Sprint apps like Visual Voicemail and Sprint Zone
Native Hotspot unlocked
Disabled High Volume Warning
5-way Reboot mod for convenience
Removed Itson
Removed/Disabled Knox and related apk's & libs/modules
Removed Sprint bloat installer and Sprint ID
Removed WhatsAppDownloader
Removed Facebook and facebook feature apps (can be downloaded from Google Play)
Removed Samsung Pay and Payment Framework (they are useless on rooted roms since they don't work if you have a rooted system or have tripped knox flag)
There are a few csc tweaks as well as build.prop tweaks. The usual. Nothing far from stock.
Added the following apps:
Peel Smart Remote ( Why not? The Note 4 has a IR blaster unlike the note 7 )
GifMaker app (is an add-on feature for the stock Samsung photo gallery and can be found in the stock gallery's menu)
Samsung fonts package (can be accessed from fonts settings. There's a lot so it takes a few seconds to load them all. When you open fonts settings be patient, they will load)
S7 Edge Nougat TW Launcher
Chinese Smart Manager because it's prettier!
Added Features:
None at this time
Known issues:
This is the list of known minor issues upon initial release.
Always On Display aka "AOD", Edge Lighting and Night Clock are obviously not gonna work properly.
(I have it turned off by default. You can enable it and play with it as well as try different "AOD "fixes" that may be available)
Fingerprint Scanner not working (Workaround added)
No Iris Scanner (I removed instances of Irus scanner in setting because obviously the N4 has no Iris scanner module)
FM radio is broken (I plan to fix this in the future as time permits. (I simply did not make this a priority )
WiFi calling is impossible to fix. (The IMS versions of N4 and N7 are very different. No way to fix this with the N7 dialer)
Update PRL and Profile is not working yet. I plan to fix this when I have more time. Fixed by @jc.m !!!
Launcher swiping left and right has a glitch where it sticks if you press to swipe between home screens
(use short "flicks" instead and there's no issue swiping left & right) Fixed! Flashable zip fix is in post #2
Lockscreen pin/password entry causes reboot.. Fixed by @carlosggb !!!
There are probably a few more minor things that i'm forgetting so I will work on a more precise bug list as I get to them.
***Please report any issues or bugs if you find something. Also PM me so your report doesn't get overlooked in the thread***
Changelog***v1.0 Initial release (rom features listed above)******v1.1 Aroma Update***REBOOT UNLOCK ISSUE FIXED!!!! @carlosggb
PRL UPDATE FIXED!!!! (Thanks @jc.m!!!!)
3minit Battery and Clock Added!!!
Default DPI changed to 560 (from 640)
MTP Dialog removed
Call Recording (With auto call recording to all numbers or specific numbers!)
AOD Tweaks added (Including custom brightness)
Added Fingerprint workaround (Instructions Detailed on Post #5)
Gestures and TWSwipe added to Stock Launcher
Launcher flicker fixed (Thanks @tx_dbs_tx!!!!)
Added Viper4Android
UHQ Modded Camera
DolbyAtmos added
Camera Flash mod under 15%
Added Extra Toggles!! (Thanks @ianmb!!!)
All apps multiwindow and multi-instance
USB Plug/Unplug disable wake up
Installing app older versions over newer allowed
A Couple of bootanimations included
Fixed Gallery bug (Thanks @ianmb!!!)
Fixed Calendar bug (Thanks @ianmb!!!)
Fixed Keyboard bug (Thanks @ianmb!!!)
Added Updated PhotoStudio (Thanks @ianmb!!!)
Added RomControl
Home button Wake via romcontrol
Inmersive Mode via RC
Permanent Notifications Removable (Toggle in RC)
IME Notifications Removable (Toggle in RC)
Custom Screen Off Timeout added to RC
Added DBeditor, Adaway and Texdroider DPI Changer apps
More Csc tweaks
And a few things more i don't remember
Flashing instructions:Before you flash this rom you absolutely MUST be running the latest N910PVPS4DPJ1 firmware for the Sprint Note 4. Specifically the bootloader and modem. Your phone needs to be fully activated prior to flashing any custom rom to ensure a trouble-free transition to this rom. Before you flash this rom, while on a stock Sprint N4 rom, go to Settings/System updates and update PRL then update Profile. Reboot your phone and then go to Settings/Activate this device and launch it to properly activate your phone on the Sprint network. Once this completes, make sure data, calls messaging/mms and gps works as it should. Once everything is activated and working, then proceed with the flashing instructions below. If you ignore this requirement please expect issues and don't ask for help until you do these initial steps.
If you are running software older than PJ1 then you can either take the ota updates in order on your phone via OTA updates, or use odin to flash the software in order of release until you are fully updated. OTA updates on your phone are installed differently than odin packages therefore you may only have to take one or two updates to become current. The OTA updates run scripts to patch your current rom unlike odin tar packages that completely write the entire partition replacing everything clean. I will not go into great detail about that here. I have covered this many times in my other threads so if you aren't sure then do some searching here in the Note 4 forums. If you already updated your software past the PJ1 version then you can try to flash the rom BUT you could possibly have hardware issues with wifi, etc. So if you want to play it safe, revert to the official PJ1 firmware which can be done by odin flashing the stock N910PVPS4DPJ1 software on your PC or a custom firmware only package that can be packaged for this purpose. Just ask if you need help finding it there's a couple of people here that can help with that. My advice is to run this rom with the PJ1 firmware for the best results since the kernel, modules and hardware specific software is based on version PJ1.
***Before you flash this rom, please make sure your battery has at least 30% charge***
OK... Lets begin!
1. Download the rom
2. Check the MD5!!! Use a MD5 checksum tool on your pc or phone (Google is your friend)
3. Copy the downloaded rom to your phone's internal storage or micro-sd card
Note: It has become apparent to me that if you are coming from another custom rom, especially another port rom, that you MUST also wipe your internal storage. Left over data from other roms DO cause major problems! So if you want the best trouble-free experience with this rom, I highly recommend that you backup anything you need from you internal storage and wipe it in recovery. You should do this before placing this rom on your internal storage or else put the rom zip on your micro-sd card.
4. Backup anything you need to backup from your internal storage and copy it to your pc or sd-card (DO NOT RESTORE BACKED UP APPS! INSTALL THEM FRESH FOR THE BEST TROUBLE-FREE EXPERIENCE!)
5. Reboot to TWRP custom recovery. Press "Wipe". Do the "Factory Reset" several times then go into "Advanced Wipe" options and wipe Dalvic-Cache, System, Data, and Cache several times.
6. Go to recovery home screen and select "Install" and select the rom zip that you have already copied to your phone in step 3 above. Install the rom and the script will prompt you to reboot system when it is finished flashing.
7. The initial boot process will take around 12 minutes. Please be patient. It WILL boot.
8. Once the phone has booted and you will see "Installing Applications". The phone will reboot once during this process then continue installing upon reboot.
9. Once you reach the setup wizard ...
10.Reboot to Recovery and Flash Modset, pick your options in the Aroma!!
11.Once you are back to the Wizard Proceed as usual and setup your phone. At the very last step when allowing the weather location access the phone will reboot one more time. Upon reboot you will be at the home screen.
12.If you picked Magisk as your root method, go to the Download folder and install MagiskManager apk or you wont have root access!
13.That's it! You're done! You are now going to smile as you experience the best ROM for the Sprint Galaxy N4 to date.
Note: Immediately upon reaching the home screen you may notice some lagginess. This is due to Google and Samsung accounts syncing all of their respective account features at once. I highly recommend that you first go to cloud/sync settings and set these account options right away to conserve battery and data usage Uncheck the things you don't want or need.
Enjoy the official Note 7 port ROM for the Sprint Samsung Galaxy Note 4! Please feel free to post rom feedback and support questions.
CreditsWithout the following people NONE of this would be possible. Period.@Chainfire for root and SuperSU. Thank you!@iBotPeaches for the continued development and support of apktool. Thank you!@JesusFreke for smali/baksmali tools! Thank you!
ROM Developmenttx_dbs_tx
Modset Developmentcarlosggb
Hybrid ROM Testing & Troubleshooting TeamThe following XDA members contributed to the success of this ROM(in alphabetical order... more people will be added)@Cflynt@freeza@ianmb@ipodhacked86@jc.m@Jhill110@kenjesse@LMMT@Qubanaso@SaintZ93@samep@wantedman76@Zaileion
Follow me on my google hangouts for current and up to date discussions on current and future rom projects! We have fun and talk about anything! Just PM me your gmail address and I can add you to my Hangouts. Don't forget to introduce yourself with your XDA username so other people will know who you are. See you there!
Donate(Click the paragraph below or the orange "donate" button below my avatar from any of my posts)I want to kindly ask that each person who downloads this rom to please consider making a donation for all of my time and hard work! I spent months on this and many long nights getting thing working right for everyone here to enjoy. It was grueling at times. It's not the amount that counts, it's the fact that you took the time to donate that means the most to me. It is truly appreciated and it shows me that people do appreciate what I do for the community. Without this kind of gesture developers like myself are not inclined to continue devoting this kind of work in the future. Depending on the downloads-to-donations ratio for this rom, I will take this into consideration when deciding on any future projects. Thank you to everyone for your continued support!P(lease enter your XDA username in the "Notes" section of you PayPal transaction)
Top Supporters@radjay@Hec1N1
DOWNLOAD( MD5 checksums are provided below. They are the same regardless of link used )Ultimate Note7 Hybrid SM-N930P v1.0MD5: F44AB6C8CB762CD912FDA26610233293
UN7 Modset v1.1MD5: 65ABD93452608DD53B91EE18F8A34AD9
Alternate linksUltimate Note7 Hybrid SM-N930P v1.0UN7 Modset vv1.1
XDA:DevDB Information
ULTIMATE Note 7 Hybrid [N930PVPU1APGC], ROM for the Sprint Samsung Galaxy Note 4
Contributors
tx_dbs_tx, carlosggb
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: N910PVPS4DPJ1_N910PSPT4DPJ1_N910PVPS4DPJ1_HOME
Based On: AP_N930PVPU1APGC_CL8706608_QB10377011_REV00_user_low_ship_MULTI_CERT_meta
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2017-05-12
Created 2017-01-14
Last Updated 2017-08-25
Holy cow it's TX... Sup man? I have moved on to an unlocked Note 9 (Snapdragon) that I'm using on a tracfone related service. For which I got a t-mobile tracfone sim for easier compatibility with wifi calling. Which now works by the way. Saving $$ on a phone bill has actually freed up $ for other cool things/projects like doing some TV repair. Haven't felt any need to root actually. I use it for work big time now & don't want to complicate things. Moved away from Sprint which was the only issue with this ROM but you had a solution for that too.
Sprint gone now (on its way out)
Sent from my SM-N960U1 using Tapatalk
Fixes and Additional Files
SMS/MMSDuring testing a few people had issues with sms/mms not sending after a reboot. The guys figured out a fix for this problem so I created a flashable fix which will be copied to your sd card upon flashing the rom. If you definitely have a problem sending sms/mms and it becomes a constant thing then you need to flash this fix. It's a simple edit in one xml file in csc. Simply flash AlternateSmsMmsSendingFix_UN7_Hybrid_by.txdbstx.zip
and reboot. That should fix the sms/mms sending problem.
==========================================================================
Root & SuperSU after a factory resetThe original SuperSU root package will also be copied to your sd card during the rom flash. You will need this if you do a factory reset because you will lose root. Simply flash SR1-SuperSU-v2.78-SR1-20160915123031.zip in recovery AFTER you have done a factory reset AND rebooted your phone at least once.
==========================================================================
Samsung GalleryIf your photo thumbnails disappear in Samsung Gallery then wipe the data and cache for Gallery in "Applications" section of Settings. This should fix the problem. :good:
==========================================================================
The Notorious TouchWiz Launcher Swipe GlitchFlash this UN7-TW-Launcher-Fix-by-tx_dbs_tx.zip and the bug will be gone. You can use any compatible TW launcher without worrying about the launcher swipe glitch. Remember, this fix took me a while to figure out. It should work on other N7 port roms that have the same issue. But please do NOT reupload or post other links to my fixes in other rom threads. Instead, direct people here to this post and make sure people understand that there is a real fix for this problem and I am the one who took the time to fix it 100%. Thank you and enjoy!
Kernels
I highly recommend that you NOT flash kernels from other N4 variants. They likely have different configs for those models. It's not worth it. If you didn't listen to this advice and flashed a different kernel and need to flash the original kernel, check out the recovery flashable kernels here.
==================================================Original Ultimate Note7 PJ1 KernelThis is the original PJ1 kernel that is specifically modified for this UN7 Hybrid ROM. (Includes original root package)UN7_Hybrid_SM-N930P-PJ1-KernelOnlyPlusRoot.zip==================================================BeastMode r61 PJ1 Kernel exclusively for Ultimate Note7 Hybrid ROMThis is a custom tweaked Samsung PJ1 kernel that is specifically modified for this rom by none other than @freeza.BeastMode-Kernel-r61-MM-N910P-PJ1-RAGE-UN7-Hybrid-ROM
==================================================BeastMode r61 PJ1 Kernel "ZEROLEMON" exclusively for Ultimate Note7 Hybrid ROMThis is the exact same kernel as above except it supports ZEROLEMON and other extended capacity batteries.BeastMode-Kernel-r61-MM-N910P-PJ1-RAGE-ZL-UN7-Hybrid-ROM
For kernel source & details on BeastMode Kernel vist freeza's THREAD
Rules for this thread
I want to keep this thread 100% positive with zero negativity. So I ask that everybody here please treat others with respect and don't post rude or insulting comments towards other people. Nobody here is perfect and I know for a fact that everybody has something to offer so never underestimate the other girl/guy. I have learned that the best people are those who have not been given the chance to shine. Trust me. Thanks for keeping the thread awesome!!! :highfive:
My fellow dev friends will help out as much as they can. So if you ask a question and I haven't replied, most likely someone here will see your post and try to lend you a hand. So just know that the guys who are part of my private dev group are patrolling these forums and they have my permission to offer advice etc in my absence. They are familiar with the rom and it's progression from the beginning so you can trust their input. Thank you. And don't forget to rate this thread at the very top!
STEPS TO SETUP FINGERPRINT (LONG BUT VERY DETAILED TO PREVENT ISSUES )
1. ALL FILES NEEDED ARE PUSHED TO YOUR PHONE DOWNLOAD FOLDER WITH THE INSTALLATION OF THE MODSET
RESPECT THE SEQUENCE, DON'T CHANGE ORDER AND DON'T SKIP STEPS!!!
2. install and Open Applock ( apk is in internal storage/Download)
3. open AppLock / set master pin
4. go to settings tab then password settings
5. Select lock type (make sure password(pin) is set by default or change to one of the other options)
6. go to settings / Enable Service - Tick / App Lock - Tick (but it should be ticked by default)
7. go to Home Screen Lock / Switch on Home Screen Lock
8. Setup Authorization email (required)
9. Select AppLock as Launcher (then app lock will ask you what launcher you wish to use, you can change this later if you install a different launcher)
10. App lock will close / reopen app lock and enter pin
11. Apply Lock Convenience Feature - Tick
12. exit AppLock by pressing home button
13. go to phone settings / accessibility / scroll down to services and switch on AppLock / enter pin
MAKE SURE TO GIVE ACCESSIBILITY ACCESS TO THE APP BY GOING TO THE SYSTEM SETTINGS ->ACCESSIBILITY, SCROLL TO SERVICES AND SWITCH ON APPLOCK BEFORE DOING STEP 14!!!!!
14. reboot into recovery / flash N4settings.zip (internal storage/Download) and reboot
***It is CRITICAL that you follow these next steps VERY SPECIFICALLY and DO NOTHING ELSE***
15. go to UN7 RomControl / Misc and Launcher Tab / Select Fingerprint Management
16. Select Fingerprint manager to register fingerprints / click ok
17. swipe down on home button repeatedly until it says complete (should be 10 times)
18. Setup Backup Password
19. Do NOT Enable Fingerprint Lock (select cancel)
20. Add 2nd and 3rd fingerprint (you can use this to add additional fingers)
21. Reboot into recovery / flash N7settings.zip (internal storage/Download) then reboot
22. Open App Lock / Enter Pin
23. Select settings tab then password settings / Use fingerprint - Tick
24. Go into phone system settings / Lock Screen and Security / Select Screen Lock type NONE
25. Open UN7 RomColtrol and open Mod Centeral / Select AddBlocker and enable
26. Reboot
27. Profit!!
Thank you! Can't wait to try this out. Downloading now and have to update bootloader. Will report back later on.
Enjoy this guys...long time in the making!
Yeah guys, you're in for a treat. This one's a game changer.
Sent from my SM-N920P using Tapatalk
Just out of curiosity as I wait for everything to download, does this have themes working?
OMG, It's here! :victory:
I was feeling depressed today, and then i saw this!
Downloading now, can't wait to flash.
:highfive: Thank you @tx_dbs_tx and team, for all your hard work and time involved to bring us this awesome rom!
I'm sure it'll be great! :good:
fredgar75 said:
Just out of curiosity as I wait for everything to download, does this have themes working?
Click to expand...
Click to collapse
This is the real deal. Themes absolutely work!
aaron74 said:
OMG, It's here! :victory:
I was feeling depressed today, and then i saw this!
Downloading now, can't wait to flash.
:highfive: Thank you @tx_dbs_tx and team, for all your hard work and time involved to bring us this awesome rom!
I'm sure it'll be great! :good:
Click to expand...
Click to collapse
And Thank you Ohio for making America Great again! Enjoy!
tx_dbs_tx said:
And Thank you Ohio for making America Great again! Enjoy!
Click to expand...
Click to collapse
For Sure!!! plus also Donation Sent! :good:
ok currently i am at the restoring screen restoring a bunch of apps. i'm asssuming that means they get installed fresh and not as restored from a backup. When you said dont restore from backup you were refering to titanium backup or similair?
He has done it again....good work
Im still runnin Hybrid 3.0 im looking forward to this.
Thank you very much...I have been waiting for this.
I am now on PK1... Anyone tried it on PK1?
If I want to downgrade to PJ1 via odin my device won't brick?
anees02 said:
Thank you very much...I have been waiting for this.
I am now on PK1... Anyone tried it on PK1?
If I want to downgrade to PJ1 via odin my device won't brick?
Click to expand...
Click to collapse
just odin bl/fw is the easiest/fastest way rather than odin the entire stock rom.
i odin'd from PG1 to PK1 and vice versa
KLPFL said:
just odin bl/fw is the easiest/fastest way rather than odin the entire stock rom.
i odin'd from PG1 to PK1 and vice versa
Click to expand...
Click to collapse
Then I will delete all files from the PJ1 tar file except aboot file only and flash?
anees02 said:
Then I will delete all files from the PJ1 tar file except aboot file only and flash?
Click to expand...
Click to collapse
if you know how... you would need to have two tar file.. one for baseband and one firmware.
---------- Post added at 04:16 PM ---------- Previous post was at 04:12 PM ----------
give me a second.. i'll upload the PJ1 bl/fw for you...
---------- Post added at 04:20 PM ---------- Previous post was at 04:16 PM ----------
here is the BL/FW i created:
uncheck auto reboot under Option on Odin app...
load the firmware or baseband doesn't matter which one is first... pull battery after you odin one of them, then reboot in download mode volume down + home + power keys at the same time. odin the other file, pull out battery then reboot into recovery then flash your rom... of course your rom has to be in External SDcard and make sure you follow Ops installation instructions.
https://www.dropbox.com/s/juzvlftjbeltrfr/N910P-PJ1-baseband.tar?dl=0
https://www.dropbox.com/s/pf62zcb422nnqfn/N910P-PJ1-firmware.tar?dl=0
Updated download link.. go here.
https://forum.xda-developers.com/no...-baseband-file-to-flash-t3573701/post71463151
I finally got this up and running. Thank you thank you thank you! It is running great so far. Gonna give it a couple of days to settle and will report back if I find anything. And yes, themes are working great.
100% Stock, DeOdexed N910PVPS4DQB3With GSM Support!Now with Rom Control!
First Off About Me:
First off, Let me state, I'm a full-time construction worker and also a full-time Dad. I'm not a Dev, like the peeps I learned from. So don't expect this Rom to get massive updates or often updates. My main purpose of this Rom is to deliver a Newer Stock Base for anyone to play with. But I do intend on adding small basic updates, as this interest me as a hobby! Thank You for your understanding, and Enjoy!
About ROM
Warning: This ROM is ONLY for the Sprint SM-N910P!!! DO NOT FLASH THIS ROM ON ANY OTHER MODEL!!! If you do then you are on your own! Know what you are doing before flashing and modifying your phone!!! You have been Warned!! I am not responsible for your phone breaking or blowing up!!
It has come to my attention that not everyone would want Root or Any customizations. So what I did was supply a True 100% Stock Deodexed QB3 Rom with NO Mods, Except for being Knox and Its-On Free. You can use it alone or as a base to flash my other mods!!
Version: 2.0
This is a "100% stock" build with no custom mods!
Fully deodexed framework and system apps
Removed Knox
Removed ItsOn
Zip-Aligned
100% Stock Kernel
Software version: N910PVPS4DQB3
Kernel: Official Samsung N910PVPS4DQB3
ROM Features
This ROM will stay 100% STOCK besides above mentions. So this Rom could be used as a base for anyone who chooses. I do plan on releasing some minor updates of my own but They will be listed below!
Changelog
v2.0 Stock Released 03/15/2017
ADD-ON Features!
Heres a little bit about what add-ons I have so far! No big write up on them, they are self explaining!
1. GSM zip: Makes Rom work with GSM service! Removes some cdma stuff from CSC files. Removes unneeded apps. Replaces apns and build.prop edits.
2. Mods zip: This installs all the modded framwork files. (ex. Advanced power menu, Open Once/Always) This one will get updated time to time, as I add stuff!! SEE POST 2 FOR MORE INFO!!
3. Root zip: Installs Systemless SuperSU and Systemless Busybox.
4. Hidden Apps: Restores Hidden Apps. (For Sprint only)
Flashing instructions:
Before you flash this rom you should be on the N910PVPS4DQB3 firmware. Specifically the bootloader and modem. You can get that HERE! Flash it with ODIN!
Also, You need a custom recovery to Flash this Rom!
***Before you flash this rom, please make sure your battery has at least 30% charge***
OK... Lets begin!
1. Download the rom and all the other mods you want!
2. Check the MD5!!! Use a MD5 checksum tool on your pc or phone (Google is your friend)
3. Copy the downloaded files to your phone's internal storage or micro-sd card
4. Backup anything you need to backup from your internal storage and copy it to your pc or sd-card
5. Reboot to TWRP custom recovery. Do "Advanced Wipe" options and wipe Dalvick-Cache, System, Data, and Cache. I also advise deleting /Android directory from Internal storage and SD card!
6. Install the rom!
7. Dont Reboot If Installing any Mods.
8. Install Mods in this Order following ROM:
a. GSM FIX(If your using GSM) or Hidden Apps Fix(If Sprint)
b. MODS ZIP!
c. ROOT ZIP!
9. REBOOT!!
10. The initial boot process will take around 12 minutes. Please be patient. It WILL boot.
11. The phone might reboot once from SuperSU.
12. Once you reach the setup wizard proceed as usual and setup your phone.
13. You're done! Enjoy!!
Credits
Without the following people NONE of this would be possible. Period.
In no particular order!
@SuperR. for his awesome kitchen, @Chainfire for root and SuperSU, @iBotPeaches for apktool, @JesusFreke for smali/baksmali tools, and @asc1977 & @edzamber & @tdunham for all their amazing collection of guides!
Also @tx_dbs_tx, @carlosggb, @SaintZ93, @hsbadr, @osm0sis, @freeza, @ianmb, @LMMT, @samep, and @wantedman76 for all their work that I've learned much from! And SO Many more here at XDA!
Thank You All !!
DOWNLOADS
(Click the link below)
Stock, DeOdexed N910PVPS4DQB3 - v2
MD5: e4d9ef38aefb76eb362cec8e2d9947fe
MODS
See Post 2!
Rom Control
See Post 3!
I need this confirmed! Please report!
Contribited By: aaron74
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: N910PVPS4DQB3_N910PSPT4DQB3_N910PVPS4DQB3_HOME
Based On: Stock N910PVPS4DQB3
Created 2017-03-06
Edited 2017-05-01
Add-on mods downloads!
1. GSM Fix!
2. Systemless Busybox&Root Mod!
3. MODS ADD-ON Zip:
Includes the following mods so far:
Advanced Power Menu
Remove Permanet Notifications
Once/Always Default App Selection
Hot Spot Mod included!
4. Hidden Apps!
Rom control!
A great Dev @ROBERT CM made a Rom Control for our stock roms.
Goto his Thread below to Download and don't forget to Thank him and leave him a reply!
Here's his Main Thread!
Here's the Current Rom Control Post!
I also need this tested, please let me know it works!
Thank you, & Enjoy!
Nice!
Thanks @aaron74 I know we've had some requests for latest rooted stock ROM.
This sounds like what they're looking for. With developers leaving and Note 4 closing in on EOL, this device needs more developers. Best wishes for success and your endeavor to learning more.
Sent from my SM-N920P using Tapatalk
Good job! Thanks for sharing your work with the community.
Sent from my SM-N920P using Tapatalk
@samep @LMMT
I hope I can spend the time I'd like to on it.
But Thanks for your support !
any screenshots
أرسلت من SM-N930V بإستخدام تاباتلك
If someone tries adding the hotspot in, can you please let us know how it works?
alisaeed072 said:
any screenshots
أرسلت من SM-N930V بإستخدام تاباتلك
Click to expand...
Click to collapse
I can add some.
I didn't because it's just stock.
lmcmann said:
If someone tries adding the hotspot in, can you please let us know how it works?
Click to expand...
Click to collapse
I'm working on it.
Thank you for sharing. Downloading now.
Thank you for taking time from your schedule in real life to contribute to the xda and for keeping note 4 THE best phone available to date . I was just wondering if you would know how to fix the root switch barrier i have come accross when trying to load pokemon app , when i was on stock pk1 odexed i used root switch app to disable root and i played the game fine using flygps with this build and being deodexed when i try to do the same it fails , first the gps says cannot be found thats because im using mock location app and second pokemon app itself tells me it cannot authenticate the account im guessing cause it cannot pass the safety net test, so my question is ...is it a easy fix or is it something that would take weeks of work if it is dont even bother buddy ill just roll back to my backup its no biggie but if its easy i'd like to keep this build and have the pokemon working thanks.
bigbabo said:
Thank you for taking time from your schedule in real life to contribute to the xda and for keeping note 4 THE best phone available to date . I was just wondering if you would know how to fix the root switch barrier i have come accross when trying to load pokemon app , when i was on stock pk1 odexed i used root switch app to disable root and i played the game fine using flygps with this build and being deodexed when i try to do the same it fails , first the gps says cannot be found thats because im using mock location app and second pokemon app itself tells me it cannot authenticate the account im guessing cause it cannot pass the safety net test, so my question is ...is it a easy fix or is it something that would take weeks of work if it is dont even bother buddy ill just roll back to my backup its no biggie but if its easy i'd like to keep this build and have the pokemon working thanks.
Click to expand...
Click to collapse
Thanks!
But No I wouldn't have a clue about that. I'm not quite that talented yet. Ive just started learning some of the more technical stuff about modding.
If you do find out the possible fix, I'd be more than happy to incorporate it into the rom!
Thanks!
Edit: I'm just taking a stab in the dark here, but since we're dealing with root. I'm wondering if it has anything to do with su.d or system less root or dmverity.
What exact rom were you on when it worked?
I'm not home right now, but try extracting the stock kernel from the qb3 firmware.
Flash it then flash Super su again.
Then try the root switch.
Let me know if that does anything?
bigbabo said:
Thank you for taking time from
Click to expand...
Click to collapse
I managed to put together a fix to try. I'm just quessing but this will let me rule out if its related to the kernel.
Its stock PK1 Kernel (all i have on phone right now).
Download it,
Uninstall the Root switch app.
Flash the kernel zip. Reboot!
Then install Root switch.
Let me know if it works. :fingers-crossed:
EDIT- SEE Post BELOW!!
Pokeman and snapchat won't work with root... Not rom related.
Sent from my SM-N910P using Tapatalk
kaos420 said:
Pokeman and snapchat won't work with root... Not rom related.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Thanks for the info!!
kaos420 said:
Pokeman and snapchat won't work with root... Not rom related.
Click to expand...
Click to collapse
I didnt say with root i said when i turn root off using the app it worked fine so did the samsung pay as well ,i know that while root is active it wouldnt work
---------- Post added at 05:31 PM ---------- Previous post was at 05:28 PM ----------
aaron74 said:
Thanks!
But No I wouldn't have a clue about that. I'm not quite that talented yet. Ive just started learning some of the more technical stuff about modding.
If you do find out the possible fix, I'd be more than happy to incorporate it into the rom!
Thanks!
Edit: I'm just taking a stab in the dark here, but since we're dealing with root. I'm wondering if it has anything to do with su.d or system less root or dmverity.
What exact rom were you on when it worked?
I'm not home right now, but try extracting the stock kernel from the qb3 firmware.
Flash it then flash Super su again.
Then try the root switch.
Let me know if that does anything?
Click to expand...
Click to collapse
Im on pl1 build stock rooted odexd, all i did is odined pl1 and root it nothing else been done to it i will try what u recommended see if that works
---------- Post added at 05:36 PM ---------- Previous post was at 05:31 PM ----------
aaron74 said:
I managed to put together a fix to try. I'm just quessing but this will let me rule out if its related to the kernel.
Its stock PK1 Kernel (all i have on phone right now).
Download it,
Uninstall the Root switch app.
Flash the kernel zip. Reboot!
Then install Root switch.
Let me know if it works. :fingers-crossed:
EDIT- SEE Post BELOW!!
Click to expand...
Click to collapse
I can post screeny of the safety net so you can see what message comes up when i turn root off on my setup and i can play pokemon and than ill take one of the safety net with your rom maybe that will give you some details ,once again im not applying any pressure on you at all like i said before its no biggie i was just wondering if it could be something simple than why not have the latest rom and still be able to play pokemon
These are from my own setup stock pl1 build stock everything root turned off is green turned on is red im going to upload screenies on your rom in different post so i dont confuse you and after than ill try the fix you suggested .
bigbabo said:
These are from my own setup stock pl1 build stock everything root turned off is green turned on is red im going to upload screenies on your rom in different post so i dont confuse you and after than ill try the fix you suggested .
Click to expand...
Click to collapse
You are running stock kernel right?
And also, you are NOT running xposed?
This is the only way i know to get Safetynet green.
The dev from Magisk is working real hard to let us keep root on for Safetynet Passing, but on the xposed side we still have that big problem.
carlosggb said:
You are running stock kernel right?
And also, you are NOT running xposed?
This is the only way i know to get Safetynet green.
The dev from Magisk is working real hard to let us keep root on for Safetynet Passing, but on the xposed side we still have that big problem.
Click to expand...
Click to collapse
No xposed just stock everything like if i took ota and than rooted it than i use root switch app and turn root off and voila pokemon works like im not rooted but on this build when i turn root off with that app and try the pokemon it doesnt work so im about to try to flash the pk1 kernel with this new build and see if that works
TeleNougat V4.5 for Sprint
@tdunham managed to get the stock deodexed Nougat rom which is based on the Sprint QC5 7.0 Nougat Note 5. I have everything tweaked in this rom specifically for the s6+ Sprint users.
"Features:
- Pre-Rooted with Magisk
- Hotspot enabled
- Knox Removed
- ItsOn Removed
- Extra Toggles added
- MSL disabled in ##DATA menu"
- S8 Apps:
Calculator/Calendar/Camera/Clock/Contacts/DownloadUi/Email/Galaxyapps/Gallery/Launcher feat. Hello Bixby/Lockscreen/Phone/SamsungInterent/Messages/Music/MyFiles/Phone/Video/Voicerecorder
Known Issues
1. language settings inside of Language and Input fc. (the issue is in systemui if someone wants to play around with it, may not get fixed anytime soon since no one really changes it from english anyway.
2. Hello Bixby app (uncheck video to not get a fc)
3. Night Clock and AOD doesnt work (due to kerne)
ROM INFO
Since this is stock based, everything Sprint related works. (prl, profile update, wifi calling, voicemail)
Personally prefer you to be on QC5 everything first (check general section in you need help odin to Nougat stock.)
Fresh wiped phone is always preferred before installing roms.
Flashing tutorial if needed:
1. Grab a cold one. (Key step)
2. Boot into twrp and WIPE SYSTEM, dalvik cache, cache in TWRP before flashing
3. Flash rom
4. Reboot
*dont forget that Android 7.0 is API 24 which means XPOSED will not work, there isn't an unofficial or official build for it yet.*
Rom Links:
V2 TeleNougat_V2Final4/20
V3 TeleNougat_V3
V4 TeleNougatV4_4/27Build
V4.5 TeleNougat4.5
V4.5 changelog: since noone has been complaing about the test 4.5, here it is. Bixby is pretty much perfect (if fc, clear data/cache for the app) + a few sammy updates (NOTHING MAJOR FROM 4)
V4 changelog: updated ALL SAMSUNG APPS, added samsung members, samsung flow, reminder app, added media ui sounds for rom, Galaxy themes fixed, briefing tab in Bixby working, bootscreen, few edits in build prop.
V3 changelog: updated touchwiz, calendar, clock app, s8 ringtones & media, calculator, phone app, shealth root fix, etc from S8 port base.
V2 changelog: NewStuffAddons is now built in, debloated system, s8 lockscreen, more stock features in stock mms app, no fc for device maintenance (smart manager), 3mini battery/clock, etc.
V1 changelog: Stock Deodexed
Credits:
@SuperR. for the rom kitchen and his ongoing support
@topjohnwu For Magisk root"
@tdunham for deox rom
@Jacobh25 for S8 apps, etc
SlidderG3, MorganTaylor, and others for troubleshooting and help
For discussion and updates join https://telegram.me/n7ton920p
“I don’t always drink, but when I do, I prefer dark liq”
https://www.paypal.com/cgi-bin/websc...=QJDY6W6PGBEAJ
Reserved
RESERVED
Everything is working great. I dirty flashed, though, being on QC5 already is why I did. Saved time from setting everything back up again.
Yuwei01 said:
Everything is working great. I dirty flashed, though, being on QC5 already is why I did. Saved time from setting everything back up again.
Click to expand...
Click to collapse
Glad to hear, yea if you are already on nougat, i usually only wipe /system in twrp since im flashing another system that way all my settings still there and its a lil cleanier to me. But lemme know how battery life is after a day or 2.
your file only 137 kb
SM-G928P_QC5_Deodexed_v1.1.zip"]SM-G928P_QC5_Deodexed_v1.1.zip
your file only 137 kb, i can not download your file in china ,can you upload it to mega or google drive
@bihailantian655
They are both on mediafire. They are 1.65GB and 70mb for the addon
Others have it downloaded already (the links are good, i just rechecked them) , try refreshing? Or redownloading.
thank very much. testing
l have tried two different pc and two vpn. :crying:137kb :crying:
Just Curious?
Do you think there's a possibility of something like this being ported over to the standard galaxy s6 (SM-G920P). I just happened to stumble upon this while doing some google searches.
even i have flashed the 70m file still .can not use data and shealth
AlienMerc said:
Do you think there's a possibility of something like this being ported over to the standard galaxy s6 (SM-G920P). I just happened to stumble upon this while doing some google searches.
Click to expand...
Click to collapse
I doubt it, though you could try, ive never messed with s6 Devices 920P.
Question to OP or anyone who would like to give feedback: If I Backup my Stock-Rooted(SU) in TWRP, then decided to use this ROM, and then also Backup this Rom. Should there be any issues on going back and fourth between the 2? Thanks in advance to anyone willing to give me feedback on this!
SprintBama said:
Question to OP or anyone who would like to give feedback: If I Backup my Stock-Rooted(SU) in TWRP, then decided to use this ROM, and then also Backup this Rom. Should there be any issues on going back and fourth between the 2? Thanks in advance to anyone willing to give me feedback on this!
Click to expand...
Click to collapse
No I didn't have any issues when I'd swapped backups. :good:
Custom Rom QC5
Yuwei01 said:
Everything is working great. I dirty flashed, though, being on QC5 already is why I did. Saved time from setting everything back up again.
Click to expand...
Click to collapse
Do I have to be rooted to flash this ROM ? I am on Stock QC5 .
Thanks.
Mulzac said:
Do I have to be rooted to flash this ROM ? I am on Stock QC5 .
Thanks.
Click to expand...
Click to collapse
Yes, if you install twrp without rooting with the Magisk-v12.0 zip. Stock recovery will replace twrp recovery at least it did for me. If you try to install this Rom without root in twrp I believe your get a not rooted error. You could try it? And also that Rom is prerooted FYI.
Is there a way to add Avatar for sent messages? I tried frash install and still no luck
Great Rom, Thank you!
SM-G928P Custom NougatFirmware G928PVPU3DQC5
drewiskee said:
RESERVED
Click to expand...
Click to collapse
I flashed the ROM and everything is working great, but how do I get rid of Sprint Hands Free Activation in the installed GT Idoneapps.
When I click on Samsung DM Manager all I get is :" idoneapps is granted super user rights. No permissions to enter OMADM Hidden menu"
Thanks Again .......great rom
Mulzac said:
I flashed the ROM and everything is working great, but how do I get rid of Sprint Hands Free Activation in the installed GT Idoneapps.
When I click on Samsung DM Manager all I get is :" idoneapps is granted super user rights. No permissions to enter OMADM Hidden menu"
Thanks Again .......great rom
Click to expand...
Click to collapse
what are you trying to do exactly?
Maybe that will help me. I clicked it and it said the same for me
So far so good. Is there any way to disable the data usage stats on pull down? I have unlimited and don't need it. It will just bug me. Thanks a bunch
EDIT: I figured this one out myself. I am including the change in case anyone else wants the data stats removed from quick settings.
1) use ES File explorer or another root explorer.
2) copy others.Xml from "system/ csc"
3) change permissions (not sure if needed but just to be safe)
4) edit others.xml. Near bottom are the new entries for mod and I just changed <CscFeature_SystemUI_SupportDataUsageViewOnQuickPanel>FALSE</CscFeature_SystemUI_SupportDataUsageViewOnQuickPanel>. Was originally true.
5) copy over the existing file
6) reboot
7) profit.
Thanks for Rom. can't wait to get it just the way I want.
drewiskee said:
Glad to hear, yea if you are already on nougat, i usually only wipe /system in twrp since im flashing another system that way all my settings still there and its a lil cleanier to me. But lemme know how battery life is after a day or 2.
Click to expand...
Click to collapse
The Rom hasn't had a battery drain impact in anyway for me. Thanks again it's running buttery smooth.