Related
I'm trying to make my own monthly Calendar in Zooper, but i have a big problem. When i say, in advanced parameters, to calculate the day of the week with this string: #D$(#DyMM#010000)$f# i obtain 0 if it's sunday, 1 if it's monday and so on. The problem is that i need to obtain 7 if it's sunday, becaus in italian format week start on monday and finish on sunday.
I can't check it in this way: $#D$(#DyMM#010000)$f#=0?7$ because zooper doesn't recognize nested $...
I think the only way is to change the $(expression)$ for math expressions using another char (maybe § or similar).
Any suggest?
N3V3RM1ND said:
I'm trying to make my own monthly Calendar in Zooper, but i have a big problem. When i say, in advanced parameters, to calculate the day of the week with this string: #D$(#DyMM#010000)$f# i obtain 0 if it's sunday, 1 if it's monday and so on. The problem is that i need to obtain 7 if it's sunday, becaus in italian format week start on monday and finish on sunday.
I can't check it in this way: $#D$(#DyMM#010000)$f#=0?7$ because zooper doesn't recognize nested $...
I think the only way is to change the $(expression)$ for math expressions using another char (maybe § or similar).
Any suggest?
Click to expand...
Click to collapse
Is your system locale set to italian or are you using it another language (like english for example)? If the later, did you try setting the widget locale to italian?
kwerdenker said:
Is your system locale set to italian or are you using it another language (like english for example)? If the later, did you try setting the widget locale to italian?
Click to expand...
Click to collapse
It's italian.
N3V3RM1ND said:
It's italian.
Click to expand...
Click to collapse
Then it's probably a bug with Zooper. You should get in touch with the developer to clear it up.
kwerdenker said:
Then it's probably a bug with Zooper. You should get in touch with the developer to clear it up.
Click to expand...
Click to collapse
I'll wait for Richard's reply, if anyone have suggestions...
kwerdenker said:
Is your system locale set to italian or are you using it another language (like english for example)? If the later, did you try setting the widget locale to italian?
Click to expand...
Click to collapse
Hey can you provide full tutorial for make monthly calendar in zooper? Thanx:good:
N3V3RM1ND said:
I'm trying to make my own monthly Calendar in Zooper, but i have a big problem. When i say, in advanced parameters, to calculate the day of the week with this string: #D$(#DyMM#010000)$f# i obtain 0 if it's sunday, 1 if it's monday and so on. The problem is that i need to obtain 7 if it's sunday, becaus in italian format week start on monday and finish on sunday.
I can't check it in this way: $#D$(#DyMM#010000)$f#=0?7$ because zooper doesn't recognize nested $...
I think the only way is to change the $(expression)$ for math expressions using another char (maybe § or similar).
Any suggest?
Click to expand...
Click to collapse
Sorry; but I don't understand where is the problem...
(I'm Italian)
Why is it important for you have 7 on sunday instead 0?
Could you explain why for you this is important?
HyperAbarth said:
Sorry; but I don't understand where is the problem...
(I'm Italian)
Why is it important for you have 7 on sunday instead 0?
Could you explain why for you this is important?
Click to expand...
Click to collapse
Because the whole calendar is out of layout. I have the 7th day after saturday... i can't do a screenshot now, 'cause i removed the widget... if you nedd one i can reinstall it.
I'm having the same problem. Using the code [ox]44*#D$(#DyMM#050000)$f#-30[/ox]
[oy]22*#D$(#DyMM#050000)$W#[/oy]
Zooper automatically put the number in the correct position in a grid, but this cause many problem with Sunday.
I was wondering if there's a way to change 0 to 7 using advanced code, but no success til now...
Inviato dal mio Nexus 5 utilizzando Tapatalk
Please make a tutorial video
Sent from my SPH-L710 using xda app-developers app
I added days to shift Sundays to end and used % operator to move the remaining days. Now Sundays have to be moved to previous week as well, which required a different technique to compute y offset. Lastly hide 29, 30, 31st if they aren't valid for current month.
Example for day 31 is
[ox]12+23* ((#D$(#DyMM#310000)$f# +5)%7)[/ox]
[oy]2+19*(floor( (#D$(#DyMM#010000)$f#-3+31)/7)+1)[/oy]
[c]$#Dl#<31?#00000000$[/c]
Complete widget is also attached.
Thanks button click?
For those who want to understand code:
12 is x margin, 23 is column width, every day is shifted by 5 so Sunday(1) becomes 6 and week days range between 0 and 6
2 is y margin, 19 is row height, add the day number(31) to the location of 1st day of month and divide by 7 to get week number. floor to discard fraction part. 3 is subtracted to cater for certain changes like 1-7 range change to 0-6 range, Sunday shift etc. first week is 0, 1 is added to all weeks to have week range 1-5 , instead of 0-4
Yesterday I downloaded the template and "installed" on my Smartphone (just for test) but I had a problem.
In your attached image I see a correct Montly Calendar but if I create a Widget using your Template I obtain a Montly Calendar but there is a problem:
(unfortunately I can't post one image because I've already deleted widget and template from my smartphone)
I've same header (Mo, tu, we, etc)
But all the days of the month are "shifted" !?!?! for example 18th isn't under "Sa" Column but is under "Fr" Column ... 19th isn't under "Su" Column but is under "Sa" Column ... etc.
The same error for all days.
I didn't have investigated about the reason of this mistake because I don't need this Widget; I've made only a test ...
HyperAbarth said:
Yesterday I downloaded the template and "installed" on my Smartphone (just for test) but I had a problem.
In your attached image I see a correct Montly Calendar but if I create a Widget using your Template I obtain a Montly Calendar but there is a problem:
(unfortunately I can't post one image because I've already deleted widget and template from my smartphone)
I've same header (Mo, tu, we, etc)
But all the days of the month are "shifted" !?!?! for example 18th isn't under "Sa" Column but is under "Fr" Column ... 19th isn't under "Su" Column but is under "Sa" Column ... etc.
The same error for all days.
I didn't have investigated about the reason of this mistake because I don't need this Widget; I've made only a test ...
Click to expand...
Click to collapse
That is a know bug. It's because the "day of the week (number)" tag #Df# produces different numbers based on the locale of the device it's used on. Sometimes Sunday is 0, sometimes it's 7 for example.
The developer is aware of it but has not yet provided a solution.
On my Smartphone #Df# for Sunday return 0 (in some widget I make tests on 0 or 6 to color Saturday and Sunday).
You speak about " the locale of the device" to set 0 or 7; where can I set this "locale"?
I'm Italian and I set Language, time, date format, etc. for Italy ... but in Zooper Sunday is 0.
HyperAbarth said:
On my Smartphone #Df# for Sunday return 0 (in some widget I make tests on 0 or 6 to color Saturday and Sunday).
You speak about " the locale of the device" to set 0 or 7; where can I set this "locale"?
I'm Italian and I set Language, time, date format, etc. for Italy ... but in Zooper Sunday is 0.
Click to expand...
Click to collapse
Locale is the language option set for the device. I have mine set to English (US) and for me sunday is 1. If I set it to German it's 0. So maybe I got the 7 wrong and it was 0 and 1 but I'm sure I also read something about a 7... I have to check up on that.
Either way: there is no constant way of determining the value of #Df# and that is why calendar templates based on this method are screwed up on some devices.
Know if upcoming updates will correct this bug?
Enviado desde mi LG-P700 mediante Tapatalk
joseelche said:
Know if upcoming updates will correct this bug?
Enviado desde mi LG-P700 mediante Tapatalk
Click to expand...
Click to collapse
No, the developer has not yet announced anything specific about this.
It also has to be said that this isn't a bug strictly speaking. Different cultures have different ideas when a week "starts". In europe it's mainly on monday while in north america sunday is the first day of a new week. So the different output of #Df# is actually correct. It just produced unexpected behavior when used for something like this monthly calendar.
Normal Calender
qaiser said:
I added days to shift Sundays to end and used % operator to move the remaining days. Now Sundays have to be moved to previous week as well, which required a different technique to compute y offset. Lastly hide 29, 30, 31st if they aren't valid for current month.
Example for day 31 is
[ox]12+23* ((#D$(#DyMM#310000)$f# +5)%7)[/ox]
[oy]2+19*(floor( (#D$(#DyMM#010000)$f#-3+31)/7)+1)[/oy]
[c]$#Dl#<31?#00000000$[/c]
Complete widget is also attached.
Thanks button click?
For those who want to understand code:
12 is x margin, 23 is column width, every day is shifted by 5 so Sunday(1) becomes 6 and week days range between 0 and 6
2 is y margin, 19 is row height, add the day number(31) to the location of 1st day of month and divide by 7 to get week number. floor to discard fraction part. 3 is subtracted to cater for certain changes like 1-7 range change to 0-6 range, Sunday shift etc. first week is 0, 1 is added to all weeks to have week range 1-5 , instead of 0-4
Click to expand...
Click to collapse
Alright so you got the calender to work for Monday throught Sunday, How would the advanced parameters look for a calender Sunday throught Saturday. I can't seem to adjust your calender to work that way. I also could not figure out the X and Y margins. Nothing shifted correctly everytime I tried to change the X and Y for a larger widget. Thanks
Can yor macke .zw fail pls.
I've imported this widget, but there's a problem: in months where the first (of jan, of feb,of mar...) is on Sunday = the last day in week, it is shown in the same row with day names (you can see it in SS).
Does anybody know how to solve it?
I have a sort of agenda made in Zooper of my upcoming calendar appointments, but some events last more than a day (weekend away etc). How can I make this show a start and end date, instead of just the start? At the moment I have, for example:
Saturday 23 November - buy sausages - 11.00
Friday 29 November - weekend away - all day
Wednesday 4 December - do a big poo - all day
How could I make it say:
Saturday 23 November - buy sausages - 11.00
Fri 29 Nov - Sun 1 Dec - weekend away - all day
Wednesday 4 December - do a big poo - all day
Is this even possible? To normally show the date, but if the apoointment lasts more than a day make it show the start and end date? I'm trying to learn it but programming isn't my strong point! Thanks for any help.
edithswanneck said:
I have a sort of agenda made in Zooper of my upcoming calendar appointments, but some events last more than a day (weekend away etc). How can I make this show a start and end date, instead of just the start? At the moment I have, for example:
Saturday 23 November - buy sausages - 11.00
Friday 29 November - weekend away - all day
Wednesday 4 December - do a big poo - all day
How could I make it say:
Saturday 23 November - buy sausages - 11.00
Fri 29 Nov - Sun 1 Dec - weekend away - all day
Wednesday 4 December - do a big poo - all day
Is this even possible? To normally show the date, but if the apoointment lasts more than a day make it show the start and end date? I'm trying to learn it but programming isn't my strong point! Thanks for any help.
Click to expand...
Click to collapse
Zooper has two date tags per calendar event #C0S...# for the start date and #C0E...# for the end date. What you have to do is compare if the day/month combo of the start is equal to that of the end date and then show different strings based on that. In Zooper conditionals, this should look like this:
Code:
$#C0SddMM# = #C0EddMM#?<your same day string here>:<your different day string here>$
Hope this helps you out
Hi, thanks for that, but I'm afraid I'm totally lost still. I have this at the moment. So I'd change the first part (C0SEEEE dd MMMM, C1SEEEE etc) to what you said, but what exactly am I putting in the same/different day string bit?
Code:
[b]#C0SEEEE dd MMMM#[/b] - #C0TITLE# - $#C0D#=1?All Day:#C0SHH.mm#$
[b]#C1SEEEE dd MMMM#[/b] - #C1TITLE# - $#C1D#=1?All Day:#C1SHH.mm#$
[b]#C2SEEEE dd MMMM#[/b] - #C2TITLE# - $#C2D#=1?All Day:#C2SHH.mm#$
I'm away for a couple of days so if I don't reply soon I'm not being rude. Thanks again.
edithswanneck said:
Hi, thanks for that, but I'm afraid I'm totally lost still. I have this at the moment. So I'd change the first part (C0SEEEE dd MMMM, C1SEEEE etc) to what you said, but what exactly am I putting in the same/different day string bit?
Code:
[b]#C0SEEEE dd MMMM#[/b] - #C0TITLE# - $#C0D#=1?All Day:#C0SHH.mm#$
[b]#C1SEEEE dd MMMM#[/b] - #C1TITLE# - $#C1D#=1?All Day:#C1SHH.mm#$
[b]#C2SEEEE dd MMMM#[/b] - #C2TITLE# - $#C2D#=1?All Day:#C2SHH.mm#$
I'm away for a couple of days so if I don't reply soon I'm not being rude. Thanks again.
Click to expand...
Click to collapse
Here is my solution for the first day. Didn't test it in Zooper though.
HTML:
[b]$#C0SddMM# = #C0EddMM#?#C0SEEEE dd MMMM#:#C0SEEE dd MMM# - #C0EEEE dd MMM#$[/b] - #C0TITLE# - $#C0D#=1?All Day:#C0SHH.mm#$
Perfect, thanks very much!
And then a new problem arrives! The 1-day (all day) events are shown as a 2-day event, as here http://forum.xda-developers.com/showthread.php?t=2522974 I can't find the other thread he started, I'm guessing there's no workaround for that yet then if it's a Google matter?
Is it possible in Zooper Widget Add days to Date to obtain one other date?
If I set a Text in this way:
#DyMMdd#
today I see 20140112
If I write:
$(#DyMMdd#+10)$ I see 20140122
If I write:
$(#DyMMdd#+20)$ I see 20140132
This is a wrong Date; whitch is the correct syntax to add days to Date and obtain a correct date?
HyperAbarth said:
Is it possible in Zooper Widget Add days to Date to obtain one other date?
If I set a Text in this way:
#DyMMdd#
today I see 20140112
If I write:
$(#DyMMdd#+10)$ I see 20140122
If I write:
$(#DyMMdd#+20)$ I see 20140132
This is a wrong Date; whitch is the correct syntax to add days to Date and obtain a correct date?
Click to expand...
Click to collapse
Currently. no. But if I remember it correctly there was something like that announced for the next release of Zooper. Probably have to wait till then
kwerdenker said:
Currently. no. But if I remember it correctly there was something like that announced for the next release of Zooper. Probably have to wait till then
Click to expand...
Click to collapse
I downloaded Zooper Pro a long time ago and only used it at its most basic. Now that I am trying to dig a bit deeper, I've come to learn Zooper appears to be dead with respect to future improvements. Did this improvement adding to a Date to result in a new date ever happen? Did anyone determine a way to do this? I would like to do some conditional Ifs to determine if I want today's weather, tomorrow's weather or the next day based on the current time of day. The only way I can see doing this is with a way to do a "DateAdd" for lack of a better word. Is it possible yet?
Thanks!
I think
$(#D+28800yMMdd#)$
Where 28800= 20days * 24 hours * 60 min
Is there a way to highlight today's events in a different color font using the Zooper Themer Widget? I know this can be done using the integrated Zooper Calendar Widget (old Simple Calendar Widget) but I like the flexibility afforded by the Themer version. Perhaps using conditionals to test if an event occurs today?
thunderboy19 said:
Is there a way to highlight today's events in a different color font using the Zooper Themer Widget? I know this can be done using the integrated Zooper Calendar Widget (old Simple Calendar Widget) but I like the flexibility afforded by the Themer version. Perhaps using conditionals to test if an event occurs today?
Click to expand...
Click to collapse
bump!
Hi.
I use this code under Advanced Parameters to highlight (bright yellow) today events:
[c]$#C0SD#=#SDATED#?#ffffff00#$[/c]
if you have several lines in your calendar showing next events you have to change the number 0 in C0SD to the apropiate one (0=first event, 1=second event and so on)
@cierzo I tried what you suggested, but that's just not working. So by trial and error, I got this, and its working. It highlights the "Today Events" in white otherwise they're left gray (default color, in my case)
[c]$#C0SEEEE#=#DEEEE#?#ffffffff$[/c]
@thunderboy19 hope this helps.
Was thinking of the same issue yesterday, until I found your post.
sent from my BatPhone.
According to this page
w w w .zooper.org/wp/android/zw/variables-reference[/url]
(sorry, can't post links so, please, remove spaces to get there)
#DEEEE# stores the name of the day in long format so I think that your code will highlight any future event at the same weekday than today.
Don't know where I found the code that I posted but definetly is not correct thought worked for me.
Try this one instead:
[c]$#C0SyD#=#DyD#?#ffffffff$[/c]
"y" stands for year and "D" stands for day of year.
This should work fine
@cierzo my parameter is working just fine actually.
sent from my BatPhone.
karanrajkapur said:
@cierzo my parameter is working just fine actually.
sent from my BatPhone.
Click to expand...
Click to collapse
Try creating your next event (must be the first one as you are using C0S, can be in second, third,... using C1S, C2S...) on next friday, please.
cierzo said:
Try creating your next event (must be the first one as you are using C0S, can be in second, third,... using C1S, C2S...) on next friday, please.
Click to expand...
Click to collapse
@cierzo Well I have fb sync enabled, so I just changed the system date to 11th (as you might see in the screenshot) & it's just working fine. And its not that I'm arguing our trying to challenge your skill set, it's just what I came across over my usage experience. I may or may not be correct, but I'd learn by making corrections whenever this'd give any issues. No offence. Peace.
sent from my BatPhone.
No offence, dont' worry.
FIY I just tested your code and it's working as I said before: it highlights future events.
Anyway it's a fantasting widget with lots of possibilities.
I'll keep reading.
Cheers.
cierzo said:
No offence, dont' worry.
FIY I just tested your code and it's working as I said before: it highlights future events.
Anyway it's a fantasting widget with lots of possibilities.
I'll keep reading.
Cheers.
Click to expand...
Click to collapse
I suppose you're not changing the parameter values for the succeeding events. Like
C0SEEE for 1st,
C1SEEE for 2nd and,
C2SEEE for 3rd.
Cz all the events would be highlighted if you'd have set "C0SEEE" in all the lines. Hope you understood.
>>XPERIA Neo V<<
karanrajkapur said:
I suppose you're not changing the parameter values for the succeeding events. Like
C0SEEE for 1st,
C1SEEE for 2nd and,
C2SEEE for 3rd.
Cz all the events would be highlighted if you'd have set "C0SEEE" in all the lines. Hope you understood.
>>XPERIA Neo V<<
Click to expand...
Click to collapse
Let me explain:
Today is Saturday, April 5th
Imagine you have three events shown in your calendar and those events are today, next monday and next saturday
The #DEEEE# variable stores today's value: Saturday
#C0SEEE# stores 1st event day: Saturday. As #C0SEEE# = #DEEEE# ==> Highlighted
#C1SEEE# stores 2st event day: Monday. As #C1SEEE# != #DEEEE# ==> Normal
#C2SEEE# stores 3st event day: Saturday. As #C2SEEE# = #DEEEE# ==> Highlighted
(!= stands for not equal)
If you use other date values:
#DyD# stores 201495 (year 2014, 95th day of the year)
#C0SyD# stores 201495
#C1SyD# stores 201497
#C2SyD# stores 2014102
As you can see, only the first event value is equal to today's value.
@cierzo Now I got exactly what you meant.
Apologies.
Thanks bro.
>>XPERIA Neo V<<
I just came across this post and was hoping someone could fill me in. If my first event occurs today, then all the events are highlighted. Please let me know what I did wrong.
For the rich text I did edit text manually:
Code:
[tr=0,40][b ]#C0TITLE#[/b][/tr]
[c=#ffcccccc][tr=55][sr=0.7]#C0SMMM d HH:mm# - #C0EHH:mm# #C0LOC#[/sr][/tr][/c]
[tr=0,40][b ]#C1TITLE#[/b][/tr]
[c=#ffcccccc][tr=55][sr=0.7]#C1SMMM d HH:mm# - #C1EHH:mm# #C1LOC#[/sr][/tr][/c]
[tr=0,40][b ]#C2TITLE#[/b][/tr]
[c=#ffcccccc][tr=55][sr=0.7]#C2SMMM d HH:mm# - #C2EHH:mm# #C2LOC#[/sr][/tr][/c]
With advanced parameters:
Code:
$#C0SyD#=#DyD#?[c]#ffb8860b[/c]$
$#C1SyD#=#DyD#?[c]#ffb8860b[/c]$
$#C2SyD#=#DyD#?[c]#ffb8860b[/c]$
I'm trying to design a homescreen that's fairly compact and functional. Rather than displaying the actual events that will be occuring, I want to try and get my widget to tell me how many events are occuring today and tomorrow ie:
x events today, y events tomorrow.
However, I can't seem to find any method of possibly achieving this. Is it possible to get Zooper to count events between now and say, midnight?
I've searched around and i couldn't find anything (or I'm just bad at searching). Any help would be much appreciated!
brownenvelope said:
I'm trying to design a homescreen that's fairly compact and functional. Rather than displaying the actual events that will be occuring, I want to try and get my widget to tell me how many events are occuring today and tomorrow ie:
x events today, y events tomorrow.
However, I can't seem to find any method of possibly achieving this. Is it possible to get Zooper to count events between now and say, midnight?
I've searched around and i couldn't find anything (or I'm just bad at searching). Any help would be much appreciated!
Click to expand...
Click to collapse
As far as the exact syntax, I'd have to think on/test it, but logic-wise I might have a solution and from it you can hack through the syntax to make it work.
Firstly, Zooper can't count or support arrays or loops, etc. So, you'd have to find a way to get each event to equal a "(1)" and then add them all together.
The easiest way to do this would be with Tasker and then send over a single variable to Zooper, but Tasker's native Calendar app integration is somewhat hit or miss depending on device and Android version, etc.
So, how can we do this in Zooper? Well as I was typing this I tried testing a few different way and realized each time you perform a mathematical operation in Zooper the result is a display result and not a new number you can then add or subtract from something else.
Maybe someone has a solution though. Would be interested to see how it can be done without Tasker.
It seems the following would work for counting today's remaining events. All-day events may mess it up. The basic idea is to test if event n is today and event n+1 is not today. It would look like this
...
$#CnSyyyyMMdd#<=#DyyyyMMdd#&&#Cn+1SyyyyMMdd#>#DyyyyMMdd#?n+1$
...
Or,
$#C0SyyyyMMdd#>#DyyyyMMdd#?0$
$#C0SyyyyMMdd#<=#DyyyyMMdd#&&#C1SyyyyMMdd#>#DyyyyMMdd#?1$
$#C1SyyyyMMdd#<=#DyyyyMMdd#&&#C2SyyyyMMdd#>#DyyyyMMdd#?2$
$#C2SyyyyMMdd#<=#DyyyyMMdd#&&#C3SyyyyMMdd#>#DyyyyMMdd#?3$
$#C3SyyyyMMdd#<=#DyyyyMMdd#&&#C4SyyyyMMdd#>#DyyyyMMdd#?4$
$#C4SyyyyMMdd#<=#DyyyyMMdd#?5+$
You can expand it up if you want, but all this has to be on one line. You can probably shorten it with yy instead of yyyy. Now as far as tomorrow's events, good luck.
Wrong thread
Mokum020 said:
I came up with a similar solution for todays events as ewcrider (also should be one line in Zooper):
$#C0SddMMyy#=#DddMMyy#&&#C1SddMMyy#!=#DddMMyy#?1$ $#C1SddMMyy#=#DddMMyy#&&#C2SddMMyy#!=#DddMMyy#?2$
$#C2SddMMyy#=#DddMMyy#&&#C3SddMMyy#!=#DddMMyy#?3$
$#C3SddMMyy#=#DddMMyy#&&#C4SddMMyy#!=#DddMMyy#?4$
$#C4SddMMyy#=#DddMMyy#&&#C5SddMMyy#!=#DddMMyy#?5$
The difficulty is that the event number order changes so that the first upcoming event will always be C0, second C1 etc.
So for instance if you create the first event tomorrow it will be C0 but if you then create a event for today this will become C0 and the event for tomorrow will become C1.
Click to expand...
Click to collapse
This solution worked for me, as a simple cut and paste. Very crafty!!
Wrong thread
Mokum020 said:
Wrong thread
Click to expand...
Click to collapse
Why does every thread you posted in say "wrong thread" now?