................................
2013-07-21 -->> OP update links for download file UPDATE-SuperSU-v1.41.zip.
2013-06-22 -->> OP update links for download file UPDATE-SuperSU-v1.34.zip.
2013-06-08 -->> OP update links for download file UPDATE-SuperSU-v1.32.zip.
2013-06-03 -->> OP update links for download file UPDATE-SuperSU-v1.30.zip.
OP update links for put CWMv6: Direct download CWMv6 (recovery.img) by williegomezt.
For new JB V07 update: Direct download drivers and SP_Flash_Tool_exe_v3.1224.01.
Do you think this will work with other BLU devices? I am thinking about buying a Dash 4.0, but I wouldn't want it without root.
dskrilz said:
Do you think this will work with other BLU devices? I am thinking about buying a Dash 4.0, but I wouldn't want it without root.
Click to expand...
Click to collapse
You searched if there is someone who managed to ROOT your device here in xda?
Root MANY ANDROID! [Upd: 24.04.2013]
I'm also on other forums and had been trying to help a friend who needed to ROOT [BLU Tank 4.5] that has fastboot mode.
[TUTORIAL] Root Blu Dash 4.0
We try ROOT through this process and believe that you can try too. So I do not have these devices, and you must read a lot before making a decision. Before any procedure must have stock ROM or at least a backup of it.
BLU Dash 4.0 has [Chipset Qualcomm MSM8225 Snapdragon]. Furthermore, this procedure Super_Su did not work for with the original recovery BLU VIVO 4.3 ROM JB 4.1.1. With recovery original it says "Installation aborted".
Blu Vivo 910a Jelly Bean generic Rom- How to root
I have a Blu Vivo 4.3 910 a which I updated with the generic Rom from Blu.Did someone root this version.
I tried many like One Click, z4root Version 1.3, root with reset version v.29, but nothing is working.
Also it does not accept update zip Version v.25 it says aborted.
How could it be rooted?
lopestom said:
Download to perform ROOT (if your choice) and place them on your sdcard ---> UPDATE-SuperSU-v1.25.zip
[03.03.2013] SuperSU v1.25 ---> http://forum.xda-developers.com/showthread.php?t=1538053 << --- >> original link -- Thanks for this xda developers.
With the phone turned off, press POWER and VOL +.
Appears CWM v6 -> select install zip from sdcard ---> choose zip from sdcard -> find file with VOL - or VOL + file [UPDATE-SuperSU-v1.25.zip]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Select YES with POWER. There, at the end of the process SU is installed.
Go + ++ Go Back + + + up to find -> reboot system now. Select with POWER.
When you restart the phone, mark in ---> configuration ---> Security --> Unknown sources.
For more details see my other Thread --> Loss IMEIs
So you now have installed a upgraded SuperSU-v1.25.
This it! Your device is ROOTed. :good:
Credit to xda developers for UPDATE-SuperSU-v1.25.zip .
For helping to make it happen => Mario Doce; williegomezt
Click to expand...
Click to collapse
bluvivo said:
I have a Blu Vivo 4.3 910 a which I updated with the generic Rom from Blu.Did someone root this version.
I tried many like One Click, z4root Version 1.3, root with reset version v.29, but nothing is working.
Also it does not accept update zip Version v.25 it says aborted.
How could it be rooted?
Click to expand...
Click to collapse
You must have knowledge of tool SPFT- [SP Flash Tool] to put on BLU VIVO 4.3 device only file "recovery.img" by @williegomezt (CWMv6 - see my signature).
---------------------------------------------------------------------------------------------
Download links are directly updated in the forum.
lopestom said:
You must have knowledge of tool SPFT- [SP Flash Tool] to put on BLU VIVO 4.3 device only file "recovery.img" by @williegomezt (CWMv6 - see my signature).
---------------------------------------------------------------------------------------------
Update links direct in forum.
Click to expand...
Click to collapse
Thanks but there to I get the recovery.img file? The Flash Tool I have.
bluvivo said:
Thanks but there to I get the recovery.img file? The Flash Tool I have.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=33100711&postcount=51
Download [VIVO 910a CMW by williegomezt.rar] unzip the rar file with the password for placed on the post. Inside this file rar have [recovery.img (CWMv6)].
I have the img.file and the flash tool all goes well but and the download and the phone conected it does not have the driver for the USB.
So there is no download.I download the driver but still is not working.Any help?
lopestom said:
http://forum.xda-developers.com/showpost.php?p=33100711&postcount=51
Download [VIVO 910a CMW by williegomezt.rar] unzip the rar file with the password for placed on the post. Inside this file rar have [recovery.img (CWMv6)].
Click to expand...
Click to collapse
Correct procedures to install the drivers.
bluvivo said:
I have the img.file and the flash tool all goes well but and the download and the phone conected it does not have the driver for the USB.
So there is no download.I download the driver but still is not working.Any help?
Click to expand...
Click to collapse
What system you are using Win XP/Vista/7/8?
I'll pass the correct procedures to install the drivers:
On the computer:
Go to the Drivers folder and run "InstallDriver" (for the file I'm sending you).
On your device:
Connect the device to your computer, go to Settings, Options programmer, Activate and check "USB Debugging" and press OK.
On your computer:
1 - Go to device manager, click on unknown device or wrongly recognized (MT65XX Preloader);
2 - MT65XX Preloader updating drivers, click browse for driver software on this computer;
3 - Type of Device, click Show All, and then click Have Disk and browse to the folder "Driver\ADB" and select the file [android_winusb.inf];
See this image for [android_winusb.inf]:http://forum.xda-developers.com/showpost.php?p=38864558
4 - Select Android Composite ADB Interface;
5 - If message appears, requesting confirmation to install, confirm, appear to Windows Security box, asking if you want to install Google Inc, Select Always Trust and install;
6 - Now just do the procedure in SPFT to put only the recovery (CWMv6).
Remember that with Win7 installations should always be run as administrator!
Check this with @tanmay5 in mmxA110 #38 ------->>>> http://forum.xda-developers.com/showthread.php?t=2167244&page=4
For Win8 disable UAC:
3. open control panel in win8 the metro you one not classic one. I think u all might be knowing how to go there.
There click on general tab then click - advanced startup n press restart.
then go to troubleshoot option in press option 7 i.e disable driver signature. Thats the most Important step.
4. your pc will get restarted null enter in the in that option.
5. your UAC (User Account Control) must be enabled atleast to the recommended level/2nd one from the top.
Click to expand...
Click to collapse
This is information within [VIVO 4.3 Tool\Driver_Auto_Installer\Driver_Auto_Installer]:
Driver_Auto_Installer_v1.1208.00
ReadMe.txt
Click to expand...
Click to collapse
Code:
This application will install USB com port driver for MediaTek's device those IDs are listed below:
1."VID_0E8D&PID_0003" (FeaturePhone & Smartphone BootROM - MTK USB Port)
2. "VID_0E8D&PID_0023&MI_00" (FeaturePhone - MTK USB Modem Port)
3."VID_0E8D&PID_0023&MI_02" (FeaturePhone - MTK USB Debug Port)
4. "VID_0E8D&PID_2000" (SmartPhone - PreloaDer USB Port)
5. "VID_0E8D&PID_2001" (SmartPhone - DA USB Port)
6. "Vid_0E8D&PID_2006&MI_02" (SmartPhone - Kernel Gadget USB port, Please customize your kernel VID/PID)
"Vid_0E8D&PID_2007"
"Vid_0E8D&PID_200a&MI_02"
The application user must belong to Administrator group or have the privilege to install driver.
the execution of the InstallDriver.exe will install the driver, and the UninstallDriver.exe is special for remove driver.
the InstallDriver.exe will remove the legacy version of driver before install current driver automatically.
Notes:
1. Windows 2003 use the INF files which under the 2K_XP_COM
2. The device which generates two com ports (USB Modem Port Driver & USB Modem Debug Driver) only support Systems after Win XP sp3 version.
If you want to support these devices in Win XP Sp2, add these patchs:
http://support.microsoft.com/kb/918365/
http://support.microsoft.com/kb/935892/
lopestom said:
Download to perform ROOT (if your choice) and place them on your sdcard ---> UPDATE-SuperSU-v1.34.zip
[03.03.2013] SuperSU v1.34 ---> http://forum.xda-developers.com/showthread.php?t=1538053 << --- >> original link -- Thanks for this xda developers.
Works for both models BLU VIVO 4.3 - D910a and D910i. If you are not with this device, then you should search or create CWM for your own device.
For put CWM v6 in BLU VIVO 4.3 see this: HOW TO PUT CWM v6.0.1.2 by williegomezt
For more details to put "recovery.img" using SPFT see Flashing only part of the ROM: [TUT]MTK Android (Sp flash tool ) tutorialhttp://forum.xda-developers.com/showthread.php?t=1982587
Download SP_Flash_Tool_exe_v3.1224.01 and INSTALL drivers: VIVO 4.3 Tool 20130322.rar
On your device ---> configuration ---> Security --> check the option=> Unknown sources.
Instructions after putting CWMv6: With the phone turned off, press POWER and VOL +.
Appears CWM v6 -> select install zip from sdcard ---> choose zip from sdcard -> find file with VOL - or VOL + file [UPDATE-SuperSU-v1.34.zip]
Select YES with POWER. There, at the end of the process SU is installed.
Go + ++ Go Back + + + up to find -> reboot system now. Select with POWER.
So you now have installed a upgraded SuperSU-v1.34.
That's all! Your device is ROOTed. :good:
Credit to xda developers for UPDATE-SuperSU-v1.34.zip .
For helping to make it happen => Mario Doce; williegomezt
Click to expand...
Click to collapse
I have an error when I use SPFT. I downloaded and installed the MT6577 USB VCOM drivers from http://www.filecrop.com/MT6575-USB-VCOM-drivers.html and they installed fine.
I then followed your instructions for loading your recovery.img file to my phone. I got as far as the blue load line and then I got an SPFT error
BROM EROR : S_FT_NEED_DOWNLOAD_ALL_FAIL (4050)
and then it stops.
Any ideas?
rederikus said:
I have an error when I use SPFT. I downloaded and installed the MT6577 USB VCOM drivers from http://www.filecrop.com/MT6575-USB-VCOM-drivers.html and they installed fine.
I then followed your instructions for loading your recovery.img file to my phone. I got as far as the blue load line and then I got an SPFT error
BROM EROR : S_FT_NEED_DOWNLOAD_ALL_FAIL (4050)
and then it stops.
Any ideas?
Click to expand...
Click to collapse
This is something related to installing drivers. Another interesting case is USB plug behind the PC.
Check this for more drivers MT6577. Download your version for SO (W8/W7/Vista/XP )--> [TUT] Instructions MTK6577 USB VCOM Driver Installation
I read in other posts that you have Win8 and this is not good. But many friends managed. Read post # 10, disable UAC, see picture of correct installation and try again. See this for correct install drivers: http://forum.xda-developers.com/showpost.php?p=38864558
Another attempt is to use scatter file this on my forum [TUT] HOW TO INSTALL ROM 4.1.1 JB - BLU VIVO 4.3 D910i. Download the BLU_D910i_V06_GEN_T8113_20130322_CWM.rar, unzip. In SPFT, select only the option [RECOVERY].
Root blu dash 4.0
dskrilz said:
Do you think this will work with other BLU devices? I am thinking about buying a Dash 4.0, but I wouldn't want it without root.
Click to expand...
Click to collapse
Watch this video: youtube-->How to root Blu Dash 4 0
follow his link to get the rootme pack...
You will need the adb driver... since BLU doesn't provide this anywhere you can install it via installing pdanet...
search google for "topnotchtablets installADBDriver"
I first installed ADB, then I ran the root script and voila my BLU DASH 4.0 was rooted... took me a while to find this out.. searched everywhere for the correct adb driver...
enjoy!:good:
I cannot post links yet because I just registered to this forum today... I would have posted the links tho.. sorry
zachpainter77 said:
Watch this video: youtube-->How to root Blu Dash 4 0
follow his link to get the rootme pack...
You will need the adb driver... since BLU doesn't provide this anywhere you can install it via installing pdanet...
search google for "topnotchtablets installADBDriver"
I first installed ADB, then I ran the root script and voila my BLU DASH 4.0 was rooted... took me a while to find this out.. searched everywhere for the correct adb driver...
enjoy!:good:
I cannot post links yet because I just registered to this forum today... I would have posted the links tho.. sorry
Click to expand...
Click to collapse
I have helped some users BLU. Since then sought to unite all and maybe we can do a full forum here on xda.
So, see this #47: Blu Dash 4.0 D270i Rom damaged after Root
and this: [Q] Custom ROM for the BLU Dash 4.0???
BLU Users Unite
lopestom said:
I have helped some users BLU. Since then sought to unite all and maybe we can do a full forum here on xda.
So, see this #47: Blu Dash 4.0 D270i Rom damaged after Root
and this: [Q] Custom ROM for the BLU Dash 4.0???
Click to expand...
Click to collapse
y this is a good idea . . . There is not enough support for BLU devices out there . . .
ROOT in BLU VIVO 4.3 - JB 4.1.1 - without using SPFT
Hello I did otherwise the root device of people who do not know or do not want to use SPFT.
So read the instructions well and be happy. I researched other ways, but just found this one with Chinese software. Remember: It will install an application Chinese. But I made a tutorial that this app can be removed later.
TUTORIAL ROOT in BLU VIVO 4.3.pdf
VRoot_1.2_Setup.rar
Or see more images here: Guide - How to Root BLU VIVO 4.3 with JB 4.1.1
HOW TO INSTALL ROM 4.1.1 JB - BLU VIVO 4.3 D910a
"Follow my instructions:
- Start again with a new download of the official file.
The battery must be at least half the load.
1. Visit the website: blu.kiwibed.com You must enter the username and password to access the folders
Username: blusoft
Password: aplic10
2. Enter the folder Aplic Software / Software Vivo 4.3 generic.
3. Select the model of your phone (BLU-D910I or BLU-D910A)
4. Download the zipped file on your computer
5. After downloading the file, upload it to the direct sdcard. No need to unpack
6. Turn off the phone and turn it back on leaving the keys pressed simultaneously volume + and power.
7. Menu will appear in the android recovery. With the volume buttons you browse options in this menu and the power button validates the selected option.
8. Appear => Execute/Press --> Wipe factory
9. Appear => Execute/Press --> Wipe cache
10. Choose the option: "apply update from sdcard"
11. Browse by sdcard and choose the file you downloaded.
12. Then the phone will restart and update the new version of android."
I followed the above instructions, now my phone won't boot. Message was; Installation Aborted. So I re-boot it and got stuck to the "Blu Logo". Any help is greatly appreciated to go back to stock rom (ics).
Fherby said:
I followed the above instructions, now my phone won't boot. Message was; Installation Aborted. So I re-boot it and got stuck to the "Blu Logo". Any help is greatly appreciated to go back to stock rom (ics).
Click to expand...
Click to collapse
You're writing in the wrong place. Furthermore, the update should be placed with the original recovery. If you have a BLU VIVO 4.3, then you should not fear anything. So many people make the direct download to phone. This is wrong!
First on the PC and then put the sdcard. It may be that the file you downloaded came with errors.
If you have CWMv6 and backup, is back to normal. If not, try again another update file. If not, put JB version 6 in forum [TUT] HOW TO INSTALL ROM 4.1.1 JB - BLU VIVO 4.3 D910i. Read all the posts and see how to put the JB version 7.
Do not write here again on other matters, that is not the issue ROOT!
lopestom said:
You're writing in the wrong place. Furthermore, the update should be placed with the original recovery. If you have a BLU VIVO 4.3, then you should not fear anything. So many people make the direct download to phone. This is wrong!
First on the PC and then put the sdcard. It may be that the file you downloaded came with errors.
If you have CWMv6 and backup, is back to normal. If not, try again another update file. If not, put JB version 6 in forum [TUT] HOW TO INSTALL ROM 4.1.1 JB - BLU VIVO 4.3 D910i. Read all the posts and see how to put the JB version 7.
Do not write here again on other matters, that is not the issue ROOT!
Click to expand...
Click to collapse
Sorry for writing my comments in the wrong place. Anyway, thanks for the additional info you've provided.
Hello guys...
We all know that a custom recovery is far more important thing i rooted phone. But since we're talking about mediatek,its hard to find a suitable recovery.
Now these days,its very easy to create CWM based recovery through Mtkdroidtools. But,CWM is quite a oldschool yo!!
But TWRP is awesome!! Cuz its touch based and far more easy to use...but its so hard to find mediatek TWRP,so this guide will be helpfull i guess!!
~~Requirements~~
1.A computer with Windows 7 32 bit
2.The stock recovery.img[it can be found in your phone's stock rom]
3.TWRP script>>
Download link>> htt p://www .me diafire.com/folder/ca6 n5bb8 ocu87/TWRP_an d_CWMR
Download "Port-TWRP-V2.4.4.0-MT6589.7z" file from that link!!!
Now extract that 7z file and put the folder in your computer's C:// drive.....and put your stock recovery.img in C:// too.
Now open That extracted folder and you'll see a .exe file. Run that file as administration and a command window will appear.
Now it'll ask you to put your recovery.img in C:// and that is already done. So press Enter and follow the next steps. It'll ask you too put your device's chipset,resolution....so enter correctly.
When it is all done, close that Window and you'll see a folder is created called "Ported TWRP" open it and you'll get your newly created TWRP recovery.img. Copy that in your sdcard and flash it via latest Mobile Uncle Tools and voila!! You'll be rebooted to your TWRP custom recovery!!!!!
N.B>> this process is only for mt6577,mt6589 and mt6575.
Hit thanks if you like it.
Android Devilzz[root n stuffs]
Click to expand...
Click to collapse
This seems so easy I will try it
bro it shows error found please help me
Hello
Yesterday I tried (Xperia XZ2 Compact H8324) to flash on the new Android 9.
My device was built in Hong Kong.
I went like this:
First I downloaded the current German Android 9 Stock Rome via Xperifirm. H8324_Customized DE_1313-6204_52.0.A.3.84_R2B
Before the flash, I created the * .ftf file in flash tool 0.9.25.0, as shown in a Youtube video. The whole thing worked fine.
Then I put my device into Flash mode and integrated the latest drivers into my PC.
Before I could start the flash process, I had to move the *. Fsc script from the folder "devices \ H83XX" in the folder "my devices" and rename in the current firmware. Since he gave me the message when starting the flash process that no update script would be available.
Then the flash process started asking if he should skip certain things stored in the script. Of course I confirmed that.
The flash process ran without any further error message and ended with the message that the flash was successful.
However, after starting the Xperia, the message "Your device is corrupted - it can not be trusted" was displayed. The device shuts down after 5 seconds.
Fortunately, I was able to recover my original firmware through the PC Companion.
Can someone tell me where I might have made a mistake on the way and how can I fix this? I would like to have Android 9, but that has not arrived in Hong Kong yet.
This is my first tutorial, hope you enjoy it and take you further.
Thank you first to juandiazmora
So you get Android 9 on your smartphone without any regional restrictions.
The following programs are required: Xperifirm, flashtool 0.9.25.0
1. Download the Rome at Xperifirm which is compatible with your device and you want it. For me, the firmware was unpacked directly by Xperifirm otherwise uses Flashtool Tools> Bundles> FILESET Decrypt
!!! Important with the downloaded files the "fwinfo.xml delete" !!!
2. In the Flash tool go to Tools> Bundles> Create
2.1 There you choose the folder in which the firmware is located.
2.2 Then select your device at Device.
2.3 When branding enter your country version. In my case Germany.
2.4 In version your firmware version you want to install.
2.5 Now important and careful. With folders list you add all files except * .ta files to the firmware content.
2.6 Then click Create and wait.
3. Adapt Flashtool. Go to the folders "Users" \ flashTool \ devices \ H82XX and the
"User". \ Flash tool \ devices \ H83XX
3.1 Copies the 52.fsc from the H82XX to the H83XX
Deletes the 51.1.fsc
3.2 Then copy the complete folder H83XX into the folder "User" \. FlashTool \ mydevices
4. Connect the mobile phone in Flash mode to the PC. Do not forget to install the appropriate driver. Flashtool also provides drivers and Xperia Companion.
4.1 If everything is ready then go to step 5.
*
5. Flashing
5.1 Click on the flash symbol in the flash tool.
5.2 Select flash mode
5.3 For Source folder, select the folder with the previously created firmware file in * .ftf.
5.4 Select Device for Device Filter.
5.5 At Firmwares, select your created firmware.
5.6 For Wipe Sin, select APPSLOG / USERDATA
5.7 Select Disable final verification.
5.8 Flash
6. When flashing, he asks if he should use the 52.fsc.
Simply confirm everything then works well.
For me it all worked out but of course I take no guarantees. Everything at your own risk.
Double that. I havent flashed pie too, requesting a little guide how to do it properly to have full stock firmware.
I think you should use a fsc for 52 firmware, not just remane the 51.1. On github page is available the data for create that specific file. Also you can use xperifirm to download the firmware easily and safely
52.fsc
juandiazmora said:
I think you should use a fsc for 52 firmware, not just remane the 51.1. On github page is available the data for create that specific file. Also you can use xperifirm to download the firmware easily and safely
Click to expand...
Click to collapse
Hi, I need help on the flashscript thingie.
Don't have a clue where to get it from.
Thanks in advance.
I'm with Customized CE1 in my H8314 and I'm still in Oreo. It would be possible do this steps with my same firmware without doing wipe? Only deleting the country restricion.
Regards
Why can't we just flash using the downloaded and unpacked firmware from Xperiafirm? Why this need to exclude some specific .ta files and disable final verification checks?
Quarzkopf said:
Hello
Yesterday I tried (Xperia XZ2 Compact H8324) to flash on the new Android 9.
My device was built in Hong Kong.
I went like this:
First I downloaded the current German Android 9 Stock Rome via Xperifirm. H8324_Customized DE_1313-6204_52.0.A.3.84_R2B
Before the flash, I created the * .ftf file in flash tool 0.9.25.0, as shown in a Youtube video. The whole thing worked fine.
Then I put my device into Flash mode and integrated the latest drivers into my PC.
Before I could start the flash process, I had to move the *. Fsc script from the folder "devices \ H83XX" in the folder "my devices" and rename in the current firmware. Since he gave me the message when starting the flash process that no update script would be available.
Then the flash process started asking if he should skip certain things stored in the script. Of course I confirmed that.
The flash process ran without any further error message and ended with the message that the flash was successful.
However, after starting the Xperia, the message "Your device is corrupted - it can not be trusted" was displayed. The device shuts down after 5 seconds.
Fortunately, I was able to recover my original firmware through the PC Companion.
Can someone tell me where I might have made a mistake on the way and how can I fix this? I would like to have Android 9, but that has not arrived in Hong Kong yet.
This is my first tutorial, hope you enjoy it and take you further.
Thank you first to juandiazmora
So you get Android 9 on your smartphone without any regional restrictions.
The following programs are required: Xperifirm, flashtool 0.9.25.0
1. Download the Rome at Xperifirm which is compatible with your device and you want it. For me, the firmware was unpacked directly by Xperifirm otherwise uses Flashtool Tools> Bundles> FILESET Decrypt
!!! Important with the downloaded files the "fwinfo.xml delete" !!!
2. In the Flash tool go to Tools> Bundles> Create
2.1 There you choose the folder in which the firmware is located.
2.2 Then select your device at Device.
2.3 When branding enter your country version. In my case Germany.
2.4 In version your firmware version you want to install.
2.5 Now important and careful. With folders list you add all files except * .ta files to the firmware content.
2.6 Then click Create and wait.
3. Adapt Flashtool. Go to the folders "Users" \ flashTool \ devices \ H82XX and the
"User". \ Flash tool \ devices \ H83XX
3.1 Copies the 52.fsc from the H82XX to the H83XX
Deletes the 51.1.fsc
3.2 Then copy the complete folder H83XX into the folder "User" \. FlashTool \ mydevices
4. Connect the mobile phone in Flash mode to the PC. Do not forget to install the appropriate driver. Flashtool also provides drivers and Xperia Companion.
4.1 If everything is ready then go to step 5.
*
5. Flashing
5.1 Click on the flash symbol in the flash tool.
5.2 Select flash mode
5.3 For Source folder, select the folder with the previously created firmware file in * .ftf.
5.4 Select Device for Device Filter.
5.5 At Firmwares, select your created firmware.
5.6 For Wipe Sin, select APPSLOG / USERDATA
5.7 Select Disable final verification.
5.8 Flash
6. When flashing, he asks if he should use the 52.fsc.
Simply confirm everything then works well.
For me it all worked out but of course I take no guarantees. Everything at your own risk.
Click to expand...
Click to collapse
@Quarzkopf I know this thread is a bit old but I ran into similar "Your device is corrupted..." error when trying to flash US customization to my UK Xperia 1 ii. I was wondering how you got resolved this to a clean flash without this error at the end? Wasn't clear from instructions. Much appreciate your help
Hi All,
I want to install Lineage OS on a MT6580 device with 3.10.72 kernel. I have the stock rom available. I've found a suitable Lineage rom, and I know I just need to swap the boot.img and system.img (after conversion from system.new.dat) into SP Flash Tool, but I don't know how to create a new scatter file.
The scatter file from the stock rom doesn't work, I believe because the system.img and boot.img file sizes differ from the stock rom.
Can anyone give me a step by step guide how to create a new scatter file, or post a link to a tutorial. I can't find the procedure anywhere!
Thanks in advance.
Peter
What Lineage OS Rom did you find? I also have a device with a MT6580 and 3.10.72 kernel and I'm looking for a new ROM because the stock one seems to have chinese spyware.
Steps to Create a Scatter File for MediaTek Android Phone
After downloading and installing the MTK Droid Tool file on your PC, launch and run it.
Now, connect your Android Mediatek Device to your PC via a USB Cable.
Make sure you have the USB Debugging enabled on your device.
You will see the Device Info on the MTK Droid Tool, just click on the Blocks Map option.
A new window will open. Click on the Create Scatter button.
Select the directory where you want to save your Scatter File and click on Save option.
You’re done. Enjoy!
Hello XDA users, since some time we all heard about the annoncement of Android Pie for A8+ 2018
but the A8 2018 still without it yet, and also the A8 2018 korean model is in beta program which is an identical model of the a8 2018 international model, so today i wanted to explain how you guys can install it
BEFORE WE START:-
im not responsable of any demage that can happen to your phone
so get a backup first !! and use your mind
this wont be a step by step guide and it needs TWRP to be installed
LETS START: at the down you need to download the SM-A530N dump HERE which we will be using
after that extract the zip and you will find a system.img, boot.img and a modem
you will need a kitchen to extract the system img and make a zip from it, i recommend using Superr Kitchen
once you extract the system img put the boot img inside the project folder
then go to the system folder and try to debloat it a bit from korean stuff in app and Priv-app folders
then you can pack a zip using the kitchen then transfer it to your phone and flash
flash the rom then DONT REBOOT you need to flash the rmm status blocker by mesa and vertify zip 6.0
then you can reboot
once you reboot you might see a black screen with only your led light on
its normal just wait for it you will see a white boot animation
the rom is not stable much because its a beta software and also its from a korean model so somethings might be messed up
like the media server which will cause your phone to crash sometimes when for example you play a song and run a video at the same time
wish you all a good luck
credits :-
to mohit and a sm a530n user who shared this dump to make this guide possible
once i get their handles i will post em here :laugh:
Flash
can i skip the kitchen using twrp to flash system/boot/modem?
dpoloa said:
can i skip the kitchen using twrp to flash system/boot/modem?
Click to expand...
Click to collapse
no need anymore to do this since offical is released for SER csc