Stuck on startup - Galaxy Tab S Q&A, Help & Troubleshooting

I rooted my tablet and then ran Titanium Pro to freeze some applications. I then had problems and tried to rest the tablet but forgot to unfreeze first. Now when it boots up I get "Unfortunately Samsung setup wizard has stopped. I can't get into it to use Titanium Pro. Can't get to desk top.
I can force a shutdown and start up but get no further .
This is my 1st time at rooting anything. I would be happy to get it back to original especially as only 3 days old.
I am novice so need step by step instructions. Any help appreciated.
Thanks

I'm sure I've already replied to this.
Wipe data/reset in recovery then install the stock rom.
Be aware this wipes your internal storage.

ashyx said:
I'm sure I've already replied to this.
Wipe data/reset in recovery then install the stock rom.
Be aware this wipes your internal storage.
Click to expand...
Click to collapse
How do I get into recovery when it sticks on the logo? Sorry I probably sound dumb

Hold POWER + HOME + VOL DOWN.
As soon as it restarts change to VOL UP whilst still holding the other buttons until recovery mode boots

ashyx said:
Hold POWER + HOME + VOL DOWN.
As soon as it restarts change to VOL UP whilst still holding the other buttons until recovery mode boots
Click to expand...
Click to collapse
Thank you. Will try it this afternoon

korimakonz said:
Thank you. Will try it this afternoon
Click to expand...
Click to collapse
I did this Wipe data/reset in recovery then install the stock rom but when started up it stopped at the Samsung logo, not moving Odlin said OSM> All threads completed. (succeed 1 / failed 0)
I can't get into recovery - only restart by holding home, vol down and on buttons.

korimakonz said:
I did this Wipe data/reset in recovery then install the stock rom but when started up it stopped at the Samsung logo, not moving Odlin said OSM> All threads completed. (succeed 1 / failed 0)
I can't get into recovery - only restart by holding home, vol down and on buttons.
Click to expand...
Click to collapse
It takes 10mins first boot.

ashyx said:
It takes 10mins first boot.
Click to expand...
Click to collapse
It sat there for 30mins or so before I tried to switch it off or reboot. It just continues to sit at the log if I force a reboot. No shut down or anything.

You've may have flashed the wrong rom or still need to wipe data/reset.
Which rom are you flashing which device do you have and a screen shot of flash process with Odin please.

ashyx said:
You've may have flashed the wrong rom or still need to wipe data/reset.
Which rom are you flashing which device do you have and a screen shot of flash process with Odin please.
Click to expand...
Click to collapse
I am running Samsung Galaxy Tab S Wi-Fi SM-T700
Odlin said OSM> All threads completed. (succeed 1 / failed 0). I don't have a screen shot.
I used T700XXU1ANE9_T700NZC1ANE2_HOME.tar.md5. Wish now that I had tried T700XXU1ANL1_T700AUT1ANL1_HOME.tar.md5.
It has gone flat after sitting on Samsung for 7 hours

korimakonz said:
I am running Samsung Galaxy Tab S Wi-Fi SM-T700
Odlin said OSM> All threads completed. (succeed 1 / failed 0). I don't have a screen shot.
I used T700XXU1ANE9_T700NZC1ANE2_HOME.tar.md5. Wish now that I had tried T700XXU1ANL1_T700AUT1ANL1_HOME.tar.md5.
It has gone flat after sitting on Samsung for 7 hours
Click to expand...
Click to collapse
Okay it is only charged a little but just tried to see if I could get it in recovery and looks like I can so will wait now until charged.

korimakonz said:
I am running Samsung Galaxy Tab S Wi-Fi SM-T700
Odlin said OSM> All threads completed. (succeed 1 / failed 0). I don't have a screen shot.
I used T700XXU1ANE9_T700NZC1ANE2_HOME.tar.md5. Wish now that I had tried T700XXU1ANL1_T700AUT1ANL1_HOME.tar.md5.
It has gone flat after sitting on Samsung for 7 hours
Click to expand...
Click to collapse
You are downgrading from lollipop?

Yes

Well I don't quite know how, but have got into recovery, wiped & reset and now has come up working.
Thank you so much for your patience with me.

korimakonz said:
Well I don't quite know how, but have got into recovery, wiped & reset and now has come up working.
Thank you so much for your patience with me.
Click to expand...
Click to collapse
You always have to wipe data after downgrading from lollipop to kitkat.

Related

[Q] Status 7 has become something worse.

S3 i747m (virgin)
Using TWRP, I have wiped/factory reset, cleared cache, dalvik, so forth, kept getting status 7.
found this thread: http://forum.xda-developers.com/showthread.php?t=1985156 and tried out his zip fix.
Flashed "buildpropfix.zip from goomanager. Phone reboots, gets to the "Samsung Galaxy S3" screen, then just turns off.
Computer is not detecting phone through USB.
What can I do?
Thanks guys >.<
ultrashaun said:
S3 i747m (virgin)
Using TWRP, I have wiped/factory reset, cleared cache, dalvik, so forth, kept getting status 7.
found this thread: http://forum.xda-developers.com/showthread.php?t=1985156 and tried out his zip fix.
Flashed "buildpropfix.zip from goomanager. Phone reboots, gets to the "Samsung Galaxy S3" screen, then just turns off.
Computer is not detecting phone through USB.
Click to expand...
Click to collapse
That's... for a completely different phone; you've probably soft-bricked your device.
Can you boot into TWRP (Vol Up + Home + Power) or into download mode (Vol Down + Home + Power)? If the former, you can either use adb to try to replace your build.prop with something usable - probably by reflashing whatever ROM you have installed, unless you want to go through the trouble of extracting it from the ROM image and transferring it over. If the latter, you can flash a rooted stock image and start over again.
ultrashaun said:
S3 i747m (virgin)
Using TWRP, I have wiped/factory reset, cleared cache, dalvik, so forth, kept getting status 7.
found this thread: http://forum.xda-developers.com/showthread.php?t=1985156 and tried out his zip fix.
Flashed "buildpropfix.zip from goomanager. Phone reboots, gets to the "Samsung Galaxy S3" screen, then just turns off.
Computer is not detecting phone through USB.
What can I do?
Thanks guys >.<
Click to expand...
Click to collapse
Try this. I hope will work.
smelenchuk said:
That's... for a completely different phone; you've probably soft-bricked your device.
Can you boot into TWRP (Vol Up + Home + Power) or into download mode (Vol Down + Home + Power)? If the former, you can either use adb to try to replace your build.prop with something usable - probably by reflashing whatever ROM you have installed, unless you want to go through the trouble of extracting it from the ROM image and transferring it over. If the latter, you can flash a rooted stock image and start over again.
Click to expand...
Click to collapse
Okay great, so I truly am the greatest noob.
Neither boot combos will work. I do have a good backup on my external sd. Is there a way perhaps that I can force it to restore without turning on? Or reset to factory?
Try pulling the battery from your phone, then put the battery back in and use one of the boot combos. What happens afterwards?
smelenchuk said:
Try pulling the battery from your phone, then put the battery back in and use one of the boot combos. What happens afterwards?
Click to expand...
Click to collapse
Same thing. Flashes SAMSUNG and then SAMSUNG GALAXY S3, and goes black. no LED activity
norbarb said:
Try this. I hope will work.
Click to expand...
Click to collapse
Going to give it a shot...
ultrashaun said:
Same thing. Flashes SAMSUNG and then SAMSUNG GALAXY S3, and goes black. no LED activity
Click to expand...
Click to collapse
How long are you holding down the buttons for? You need to do so until you see the first Samsung logo; you should see blue text in the upper left corner if everything is going well.
smelenchuk said:
How long are you holding down the buttons for? You need to do so until you see the first Samsung logo; you should see blue text in the upper left corner if everything is going well.
Click to expand...
Click to collapse
Oh my god I could kiss you. I wasn't holding the buttons down long enough. I'm so embarassed.

[Q] HELP having a blank screen

I had rooted my note 10.1(2014 edition) SM-600. I wanted to unroot it and recover it to stock. When I started the process my computer shut off and stopped the process. I tried doing it all again but it then it went through a boot loop were it just kept rebooting and now it just has a blank screen. I am new to this but I made sure that all the things that I was using were for my device. I'm just stuck on what to do now to get it back. I do not care about saving data or anything I just want it to start working.
mikepm6 said:
I had rooted my note 10.1(2014 edition) SM-600. I wanted to unroot it and recover it to stock. When I started the process my computer shut off and stopped the process. I tried doing it all again but it then it went through a boot loop were it just kept rebooting and now it just has a blank screen. I am new to this but I made sure that all the things that I was using were for my device. I'm just stuck on what to do now to get it back. I do not care about saving data or anything I just want it to start working.
Click to expand...
Click to collapse
If you can get into recovery( holding power+volume up till "Samsung Galaxy Note logo appears ), then go to wipe data/ factory reset & choose yes , then reboot
lsherif said:
If you can get into recovery( holding power+volume up till "Samsung Galaxy Note logo appears ), then go to wipe data/ factory reset & choose yes , then reboot
Click to expand...
Click to collapse
Thanks isherif for helping out. I have done what you told me and after I did it. It just goes to a blank screen. The screen is on. There is just no picture. What other things could I do?
mikepm6 said:
Thanks isherif for helping out. I have done what you told me and after I did it. It just goes to a blank screen. The screen is on. There is just no picture. What other things could I do?
Click to expand...
Click to collapse
Try to get into download mode (vol down and power button) and flash a stock rom from sammobile via odin
Gesendet von meinem SM-P600 mit Tapatalk
benni2903 said:
Try to get into download mode (vol down and power button) and flash a stock rom from sammobile via odin
Gesendet von meinem SM-P600 mit Tapatalk
Click to expand...
Click to collapse
Ok i can do that. My only question with that is do I check flash in Odin or do I leave everything the same?
mikepm6 said:
Ok i can do that. My only question with that is do I check flash in Odin or do I leave everything the same?
Click to expand...
Click to collapse
No don`t check any thing else in odin rather the default checked one.

[Q] Samsung Tab SM-T800 STUCK AFTER FLASHING

Hey gus i need your help.
I got a SM T800X demo version which i had Android 5.02 installed, but I wanted german language, so i tried to flash it and failed.
Before flashed it was this Version:
Galaxy Tab S
Android 5.0.2
Build number: LRX22G.T800XXU1BOCC
Kernel Version: 3.4.39-4403645
Then i flashed it with odin, and it said succsess. But then it gets stuck on SAMSUNG Screen.
Odin and Recovery mode still work.
I used this Firmware: T800XXU1ANK1_T800XAR1ANI1_HOME.tar.md5
I also tried this one: T800XXU1ANF8_T800XAR1ANF6_HOME.tar.md5
can anyone help me to get it running again?
whuamai said:
Hey gus i need your help.
I got a SM T800X demo version which i had Android 5.02 installed, but I wanted german language, so i tried to flash it and failed.
Before flashed it was this Version:
Galaxy Tab S
Android 5.0.2
Build number: LRX22G.T800XXU1BOCC
Kernel Version: 3.4.39-4403645
Then i flashed it with odin, and it said succsess. But then it gets stuck on SAMSUNG Screen.
Odin and Recovery mode still work.
I used this Firmware: T800XXU1ANK1_T800XAR1ANI1_HOME.tar.md5
I also tried this one: T800XXU1ANF8_T800XAR1ANF6_HOME.tar.md5
can anyone help me to get it running again?
Click to expand...
Click to collapse
I have had this happen to me, read this thread for help http://forum.xda-developers.com/galaxy-tab-s/help/stuck-sudden-bootloop-t3067280
Also try press and hold power, home and volume up and down together to power of and then press and hold power, home and volume up to get to recovery where you can data factory reset and wipe cache which is what I did and mine did boot up eventually.
you had a different problem.
yours worked fine before and you couldnt get into recovery mode.
Mine doesnt boot after installing new ROM,
but recovery and odin mode stil work.
I made factory reset and wiped cash already before. Doesnt work.
whuamai said:
you had a different problem.
yours worked fine before and you couldnt get into recovery mode.
Mine doesnt boot after installing new ROM,
but recovery and odin mode stil work.
Click to expand...
Click to collapse
When I flashed the Lollipop rom for the first time is when I had the problem of not booting up so get your self into stock recovery and wipe and then restart and wait for it to boot up it did take a while to boot up.
that didnt work, but
ITS SOLVED
i installed this one:
T800XXU1BOCC_T800OXA1BOC4_XEF
and it worked. and its german
omfg im so happy.
whuamai said:
that didnt work, but
ITS SOLVED
i installed this one:
T800XXU1BOCC_T800OXA1BOC4_XEF
and it worked. and its german
omfg im so happy.
Click to expand...
Click to collapse
Ok well done
maxal said:
I have had this happen to me, read this thread for help http://forum.xda-developers.com/galaxy-tab-s/help/stuck-sudden-bootloop-t3067280
Also try press and hold power, home and volume up and down together to power of and then press and hold power, home and volume up to get to recovery where you can data factory reset and wipe cache which is what I did and mine did boot up eventually.
Click to expand...
Click to collapse
You saved me!
Thank you
maxal said:
I have had this happen to me, read this thread for help http://forum.xda-developers.com/galaxy-tab-s/help/stuck-sudden-bootloop-t3067280
Also try press and hold power, home and volume up and down together to power of and then press and hold power, home and volume up to get to recovery where you can data factory reset and wipe cache which is what I did and mine did boot up eventually.
Click to expand...
Click to collapse
I just wanted to say thank you. This also worked for me just now (i had flashed stock 6.02 back in as i was having issues seeing 5Ghz networks with my current image). It did take a while to boot, and had me thinking the procedure would not work...good thing you pointed out to wait patiently! :good:

Phone cannot boot after update

I updated my Zenfone 2 some minutes ago after recieving an update notification.
The phone is not booting anymore, its stuck at the "ASUS IN SEARCH OF INCREDIBLE" screen
princennamdi said:
I updated my Zenfone 2 some minutes ago after recieving an update notification.
The phone is not booting anymore, its stuck at the "ASUS IN SEARCH OF INCREDIBLE" screen
Click to expand...
Click to collapse
I've had that a few times. Clearing the cache always fixed it for me. The only reliable method that worked for me was
Turn off your phone
Hold the power and volume up buttons
When the phone vibrates, release the power button
That will get you into pre-recovery where you can use fastboot. You need to have fastboot functional on your PC/laptop/device first, then you can connect the phone via USB and run
Code:
fastboot erase cache
It should only take a couple of seconds and when you reboot it should work fine.
gavin19 said:
I've had that a few times. Clearing the cache always fixed it for me. The only reliable method that worked for me was
Turn off your phone
Hold the power and volume up buttons
When the phone vibrates, release the power button
That will get you into pre-recovery where you can use fastboot. You need to have fastboot functional on your PC/laptop/device first, then you can connect the phone via USB and run
Code:
fastboot erase cache
It should only take a couple of seconds and when you reboot it should work fine.
Click to expand...
Click to collapse
Hi, thanks for the reply. However, immediately i plug in the usb cord to the system, my phone changes from
FASTBOOT CMD WAITING
To
RESULT: FAIL(unknown command)
I always had the USB cable connected before rebooting so I have never seen that message before. You should still be able to run the fastboot command regardless of the error. IIRC it'll say RESULT: OK if it works.
princennamdi said:
Hi, thanks for the reply. However, immediately i plug in the usb cord to the system, my phone changes from
FASTBOOT CMD WAITING
To
RESULT: FAIL(unknown command)
Click to expand...
Click to collapse
did you root your phone before update?
Ninjakura said:
did you root your phone before update?
Click to expand...
Click to collapse
Yea
For wipe cache partition and hardware reset procedure, please see the following: http://www.asus.com/us/support/FAQ/1011956/
Sincerely
ASUS_USA
princennamdi said:
Yea
Click to expand...
Click to collapse
i follow this thread. ok for me.
princennamdi said:
Yea
Click to expand...
Click to collapse
You have to unroot before updating OTA or else this will happen.
problem solved....thanks @all
Asus_USA said:
For wipe cache partition and hardware reset procedure, please see the following:
Sincerely
ASUS_USA
Click to expand...
Click to collapse
Hi, Followed the instruction from the link posted here and still back to the same point, Asus Zenfone 2 still cant get pass the boot stage. This is the ZE551ML, Please need some help.
Thanks
I did like as you said but still I cant get pass through the boot.
did u @princennamdi factory reset or just cleared the cache
divyanshsh01 said:
did u @princennamdi factory reset or just cleared the cache
Click to expand...
Click to collapse
I did factory reset but mo use. Still on boot screen.
How did you fix it?
same problem on rooted asus zenfone 2 i have install system update , now device is stuck in reboot mode in asus incredible screen,
tried factory reset and clear cache . does anyone have any solution?????

G928T Major Issues :(

Hello XDA community.
I need your help guys :/
So I purchase an S6 Edge Plus from someone who said they tried to root it but failed. Now it is either stuck on the TMOBILE Logo forever, or the Starting Apps. I restored with odin with this
Version : G928TUVU2COJ5_G928TTMB2COJ5_G928TUVU2COJ5_HOME.tar.md5
But the same thing happens. Now, I was told to flash Arter Kernel, so i downloaded it and managed to flash a Recovery + Kernel + Super SU 2.46 via ADB push command when in the recovery.
(Kernel I used : arter97-kernel-g928tw8-4.1.zip)
(Recovery: twrp-2.8.7.1-noblelte.img.tar AND arter97-recovery-g928tw8-11.0-philz_touch_6.59.0.tar.md5)
Same thing happens where if i flash it I get Starting Apps 1 of 1 stuck. I've tried this on the phone for 2 hours at one point connected to charger and no luck...
Not sure about what messing around with EFS or what not the previous owner might have done? (I have a Z3X box if that helps at all)
Please help I want my Baby back and working
Any help would be appreciated!!!
:crying:
zakikawas said:
Hello XDA community.
I need your help guys :/
So I purchase an S6 Edge Plus from someone who said they tried to root it but failed. Now it is either stuck on the TMOBILE Logo forever, or the Starting Apps. I restored with odin with this
Version : G928TUVU2COJ5_G928TTMB2COJ5_G928TUVU2COJ5_HOME.tar.md5
But the same thing happens. Now, I was told to flash Arter Kernel, so i downloaded it and managed to flash a Recovery + Kernel + Super SU 2.46 via ADB push command when in the recovery.
(Kernel I used : arter97-kernel-g928tw8-4.1.zip)
(Recovery: twrp-2.8.7.1-noblelte.img.tar AND arter97-recovery-g928tw8-11.0-philz_touch_6.59.0.tar.md5)
Same thing happens where if i flash it I get Starting Apps 1 of 1 stuck. I've tried this on the phone for 2 hours at one point connected to charger and no luck...
Not sure about what messing around with EFS or what not the previous owner might have done? (I have a Z3X box if that helps at all)
Please help I want my Baby back and working
Any help would be appreciated!!!
:crying:
Click to expand...
Click to collapse
Try flashing the lastest firmware for our device in odin - G928TUVS2COKC
- after its finished completely in odin, force reboot into recovery/ volume down + power + home button, when screen goes black, quickly hold volume up + power + home and it will boot into stock recovery. ... Factory reset and wipe cache! Reboot and you should be good to go
Goody68 said:
Try flashing the lastest firmware for our device in odin - G928TUVS2COKC
- after its finished completely in odin, force reboot into recovery/ volume down + power + home button, when screen goes black, quickly hold volume up + power + home and it will boot into stock recovery. ... Factory reset and wipe cache! Reboot and you should be good to go
Click to expand...
Click to collapse
I just tried that still at the boot logo...
zakikawas said:
I just tried that still at the boot logo...
Click to expand...
Click to collapse
Only other thing i can think of is, install twrp from odin, boot into recovery and do a full wipe in advanced wipe / system/ data and both caches and then format data in the other advanced wipe option...Then reboot into download and start over with above instructions in odin!
zakikawas said:
I just tried that still at the boot logo...
Click to expand...
Click to collapse
Any luck getting it to boot?
Goody68 said:
Any luck getting it to boot?
Click to expand...
Click to collapse
Sadly no i didnt. I paid someone to try to fix it and it didnt end up working. Ppl are saying something with EFS? When i wipe it via recovery says
Unable to mount /preload??
same thing happened to my phone.
wow, I am so depressed.
did all the suggestions, but still stuck at t-mobile logo.
what shall i do? I am so sad...
Loaded G928TTMB6ERH1
Stock on T-Mobile. Nothing seems to be working/ reset and wipe not helping.
Anyway to completely reformat unit ? I am talking about re-partition, certificate, Sboot, boot , recovery and system. Whole thing so thing is like brand new.
Anyway to do it ?

Categories

Resources