Develop Bugs

How to revert to stock recovery after install TWRP 2.6.3.5

Hello
when buying P6 original rom was b111 international
then I install KK beta
then TWRP 2.6.3.5
then several custom rom by LightningKat and HYD52ROM a currently LightningKat RC02.
Question:
How install back rom b111?
Which stock twrp recovery we can apply on TWRP 2.6.3.5 for instal JB rom with dload method? eg. b111 international
Thank you for response

mstaskovan said:
Hello
when buying P6 original rom was b111 international
then I install KK beta
then TWRP 2.6.3.5
then several custom rom by LightningKat and HYD52ROM a currently LightningKat RC02.
Question:
How install back rom b111?
Which stock twrp recovery we can apply on TWRP 2.6.3.5 for instal JB rom with dload method? eg. b111 international
Thank you for response
Click to expand...
Click to collapse
in first page u have answer.
http://forum.xda-developers.com/showthread.php?t=2534420

richish said:
in first page u have answer.
http://forum.xda-developers.com/showthread.php?t=2534420
Click to expand...
Click to collapse
Hello
this thread I read but I do not know whether it is possible install twrp stock recovery 2.6.3.0 on twrp 2.6.3.5 from this thread http://forum.xda-developers.com/showthread.php?t=2632542

mstaskovan said:
Hello
this thread I read but I do not know whether it is possible install twrp stock recovery 2.6.3.0 on twrp 2.6.3.5 from this thread http://forum.xda-developers.com/showthread.php?t=2632542
Click to expand...
Click to collapse
oh i thinked that u are looking for stock P6 recovery !
yes u are able to flash TWRP 2.6.3.0 over TWRP 2.6.3.5

richish said:
oh i thinked that u are looking for stock P6 recovery !
yes u are able to flash TWRP 2.6.3.0 over TWRP 2.6.3.5
Click to expand...
Click to collapse
sorry i am layman and my english is very bad
I am installed twrp 2.6.3.5 and I am looking STOCK P6 recovery

richish said:
in first page u have answer.
http://forum.xda-developers.com/showthread.php?t=2534420
Click to expand...
Click to collapse
I actually have the same question. Cannot B118 recovery brick your phone?

Can you any one help me?
On my P6 i have instaled TWRP 2.3.6.5 and custom rom from this thread http://forum.xda-developers.com/showthread.php?t=2631444 in version 2.1
1. I want install stock twrp from this thread http://forum.xda-developers.com/showpost.php?p=49978337&postcount=249 it is a right source? it is possible install this stock twrp on version 2.3.6.5
2. Then i want install KK beta how can i do it? it is posible via dload method (local update) or how?
3. Then i want install back B125 international rom how can i do it? it is posible via dload method when KK beta will be installed. or how
Thanks

Looks like your goal is to go back to B125?
Just flash recovery only from the link you posted:
http://www.androidfilehost.com/?fid=23329332407568599
You don't need to flash KK beta, flash B125 immediately.
Place UPDATE.APP from B125 in dload folder on your external SD card. Turn off the phone.
Turn it back on while holding volume down+volume up+power. Hold for at least 3 seconds. Update should start by itself.
Hope it works for you.
mstaskovan said:
Can you any one help me?
On my P6 i have instaled TWRP 2.3.6.5 and custom rom from this thread http://forum.xda-developers.com/showthread.php?t=2631444 in version 2.1
1. I want install stock twrp from this thread http://forum.xda-developers.com/showpost.php?p=49978337&postcount=249 it is a right source? it is possible install this stock twrp on version 2.3.6.5
2. Then i want install KK beta how can i do it? it is posible via dload method (local update) or how?
3. Then i want install back B125 international rom how can i do it? it is posible via dload method when KK beta will be installed. or how
Thanks
Click to expand...
Click to collapse

thanks
iwtfmcl said:
Looks like your goal is to go back to B125?
Just flash recovery only from the link you posted:
http://www.androidfilehost.com/?fid=23329332407568599
You don't need to flash KK beta, flash B125 immediately.
Place UPDATE.APP from B125 in dload folder on your external SD card. Turn off the phone.
Turn it back on while holding volume down+volume up+power. Hold for at least 3 seconds. Update should start by itself.
Hope it works for you.
Click to expand...
Click to collapse
Thanks
Now I need a phone
Try and write whether it succeeded

Thank you very much
it is work.
Can you say me if i want install again twrp 2.6.3.7 it is necessary install first KK beta for unlock bootloader or bootloader is still unlocked and i can install twrp 2.6.3.7 directly on b125?
If is it still unlocked, it is also possible install twrp 2.6.3.3 for testing any JB custom rom?
Thanks
iwtfmcl said:
Looks like your goal is to go back to B125?
Just flash recovery only from the link you posted:
http://www.androidfilehost.com/?fid=23329332407568599
You don't need to flash KK beta, flash B125 immediately.
Place UPDATE.APP from B125 in dload folder on your external SD card. Turn off the phone.
Turn it back on while holding volume down+volume up+power. Hold for at least 3 seconds. Update should start by itself.
Hope it works for you.
Click to expand...
Click to collapse

mstaskovan said:
Thank you very much
it is work.
Can you say me if i want install again twrp 2.6.3.7 it is necessary install first KK beta for unlock bootloader or bootloader is still unlocked and i can install twrp 2.6.3.7 directly on b125?
If is it still unlocked, it is also possible install twrp 2.6.3.3 for testing any JB custom rom?
Thanks
Click to expand...
Click to collapse
As I understand surdu_petru stated that you can flash TWRP 2.6.3.7 only on KK Beta, and 2.6.3.3 only on B118 unlocked firmware.
For flashing any custom ROM you have to read what ROM developer says. If developer of the custom ROM says "you can only flash it on B118", then you must be on B118. I would not try to flash it on B125 unless I was brave/dumb!

want to go back to JellyBean B125 from Kitkat beta
installed kitkatbeta > rooted > installed twrp > installed gapps > now device is too laggy & slow..
want to go back to stock jellybean B125 firmware

huzaif_a said:
installed kitkatbeta > rooted > installed twrp > installed gapps > now device is too laggy & slow..
want to go back to stock jellybean B125 firmware
Click to expand...
Click to collapse
I'd advice you to flash HYD52ROM KK. Great performance
Sent from my P6-U06 using XDA Premium 4 mobile app

huzaif_a said:
installed kitkatbeta > rooted > installed twrp > installed gapps > now device is too laggy & slow..
want to go back to stock jellybean B125 firmware
Click to expand...
Click to collapse
First, please install stock recovery KitKat, than you are able to flash any firmware you want by : external sdcard/dload/UPDATE.APP method !
Good luck !

unable to go stock recovery
kindly give some elaborated tutorial link as how to go back to stock recover & stock rom

[Q] eXistenZ v2 Error 7

Hi guys i have a problem when I instaling the eXistenZ v2 on LT26. I rooted my phone i have recovery and when i install a rom have error nr 7 in revovery, any ideas?

Flash the kernel file from the rom itself
Try flashing the kernel from the rom itself bro this works most of the time Extract it first from the zip file of the ROM you want to install then install the kernel usually it is the boot.img file Flash it via fastboot mode using flashtool then voila you have the kernel of the ROM you want to use and most of the time the recovery comes with it too :good:

ksmalcuga said:
Hi guys i have a problem when I instaling the eXistenZ v2 on LT26. I rooted my phone i have recovery and when i install a rom have error nr 7 in recovery, any ideas?
Click to expand...
Click to collapse
Are You on stock firmware? Existenz requires You to be on stock 6.2.b.1.96 firmware. Also, You have to flash v1 and then flash v2, not the v2 directly.
11:55 said:
Try flashing the kernel from the ROM itself bro
Click to expand...
Click to collapse
Do check, this ROM is stock based, so it doesn't have a separate kernel.

I flashed witth stock 6.2.b.1.96, and try to flash V1 witch recovery v6.0.3.0 but still error ''Error in /sdcard/xperia_s_existenz_v1.zip (status 7)'' Maybe try with other kernel?

ksmalcuga said:
I flashed witth stock 6.2.b.1.96, and try to flash V1 witch recovery v6.0.3.0 but still error ''Error in /sdcard/xperia_s_existenz_v1.zip (status 7)'' Maybe try with other kernel?
Click to expand...
Click to collapse
Huh, weird. Just to verify, could You try downloading the v1 again? Or else, do You have a unlocked bootloader? If yes, then You can flash the DoomKernel.

Yes, i downloaded rom again, and i have lock bootloader witch no posibly to unlock 'allowed-no'' something like this, but this rom can be flash without unlocked bootloader.

ksmalcuga said:
Yes, i downloaded rom again, and i have lock bootloader witch no posibly to unlock 'allowed-no'' something like this, but this rom can be flash without unlocked bootloader.
Click to expand...
Click to collapse
Well, since You have a locked bootloader, You can't flash other kernels. Try this recovery, If even this one doesn't work, then try going back to full stock(no root, no recovery) and root using DoomLord's method and try above recovery again as it had worked for Me earlier.

ksmalcuga said:
Hi guys i have a problem when I instaling the eXistenZ v2 on LT26. I rooted my phone i have recovery and when i install a rom have error nr 7 in revovery, any ideas?
Click to expand...
Click to collapse
This is waaaay late but, may help someone.
As I understand it, this is an issue with the kernel/recovery you have. You need to flash a boot.img with a combined kernel/recovery that is compatible with the rom you wish to flash. You use fastboot for that:
Code:
fastboot flash boot boot.img
fastboot reboot
So, for official CM11, grab boot.img from the rom zip file and you should get (a rather old but fine for CM11) CWM recovery.
For many other Acro S (hikari) roms you find - e.g. @deedwar's BeanStalk - you will get TWRP recovery if you flash the included boot.img file.
Once you've got the kernel/recovery flashed, then you flash the full rom after the reboot.

MiyagiSan said:
This is waaaay late but, may help someone.
As I understand it, this is an issue with the kernel/recovery you have. You need to flash a boot.img with a combined kernel/recovery that is compatible with the rom you wish to flash. You use fastboot for that:
Code:
fastboot flash boot boot.img
fastboot reboot
So, for official CM11, grab boot.img from the rom zip file and you should get (a rather old but fine for CM11) CWM recovery.
For many other Acro S (hikari) roms you find - e.g. @deedwar's BeanStalk - you will get TWRP recovery if you flash the included boot.img file.
Once you've got the kernel/recovery flashed, then you flash the full rom after the reboot.
Click to expand...
Click to collapse
I think You didn't notice, but He said He has locked bootloader. So He cannot follow the procedure You mentioned.

Mirhawk said:
I think You didn't notice, but He said He has locked bootloader. So He cannot follow the procedure You mentioned.
Click to expand...
Click to collapse
Yes, this is for unlocked bootloader only.
Just noticed OP mentions a locked bootloader in a later post.

[Q] help please.im almost dying

hi every one
last night when i wanted to sleep.my phone suddenly restart .when the os wants to load.it reamins at huawei logo
i think i have this os :SelfieP6 by Reyncla
so i decided to install another rom
i found this one interest :
[ROM][4.4.4][ Unofficially Omni ROM
in order to install this rom.it said :ive to first install kk beta .to install kk beta i have to go back to stock recovery.i had twrp.so ive installed these 2 by twrp : Stock Firmware Huawei B506 CN KitKat boot and recovery.zip
first i install boot then recovery.
and now what ever i do .it reamains in huawei logo.my twrp gone,my os gone
i cant do anything with adb commands cuz it says :device not found
am i bricked my phone >?

v.mohamadtaghi said:
hi every one
last night when i wanted to sleep.my phone suddenly restart .when the os wants to load.it reamins at huawei logo
i think i have this os :SelfieP6 by Reyncla
so i decided to install another rom
i found this one interest :
[ROM][4.4.4][ Unofficially Omni ROM
in order to install this rom.it said :ive to first install kk beta .to install kk beta i have to go back to stock recovery.i had twrp.so ive installed these 2 by twrp : Stock Firmware Huawei B506 CN KitKat boot and recovery.zip
first i install boot then recovery.
and now what ever i do .it reamains in huawei logo.my twrp gone,my os gone
i cant do anything with adb commands cuz it says :device not found
am i bricked my phone >?
Click to expand...
Click to collapse
Boot into bootloader and reflash twrp.
1) I dont remember the key combination required to get into fastboot, could anyone help out on this one
2) When in fastboot your phone should get stuck on the huawei screen, then you run fastboot flash recovery recovery_twrp.img
recovery_twrp.img being the twrp file from surdus thread.
3) fastboot restart and you should be able to access twrp

TNX
tauio111 said:
Boot into bootloader and reflash twrp.
1) I dont remember the key combination required to get into fastboot, could anyone help out on this one
2) When in fastboot your phone should get stuck on the huawei screen, then you run fastboot flash recovery recovery_twrp.img
recovery_twrp.img being the twrp file from surdus thread.
3) fastboot restart and you should be able to access twrp
Click to expand...
Click to collapse
hi buddy tanx for your help.thats quite helpful.when i have twrp ,i want to use dlod methode.but i cant .can u help me what to do >?

v.mohamadtaghi said:
hi buddy tanx for your help.thats quite helpful.when i have twrp ,i want to use dlod methode.but i cant .can u help me what to do >?
Click to expand...
Click to collapse
dload method can be used only with stock recovery.
TWRP is for flashing custom ROM's.

install
XDAvatar said:
dload method can be used only with stock recovery.
TWRP is for flashing custom ROM's.
Click to expand...
Click to collapse
how can i install stock recovery ? .in surdu's post .there are 2 types of stock recovery.which one of them should i install?

v.mohamadtaghi said:
how can i install stock recovery ? .in surdu's post .there are 2 types of stock recovery.which one of them should i install?
Click to expand...
Click to collapse
Try both. See which one is working.

official rom

hello
i download and install unofficial rom 4.4.4 from here
but have alot of problems and i want install official rom again can any body help me and tell me how ??
waaaaaaaaaaaiting

Instructions for official jelly bean and kitkat
mido_nasser said:
hello
i download and install unofficial rom 4.4.4 from here
but have alot of problems and i want install official rom again can any body help me and tell me how ??
waaaaaaaaaaaiting
Click to expand...
Click to collapse
Goto the huawei site(consumer(dot)huawei(dot)com/en/) and look for support section, then select your device (assuming its the p6-u06) select smartphone then the p6-u06 from the drop down list then click submit, then choose downloads and download the b111 firmware, then get the official jelly bean recovery from this forum(easiest would be to google "p6 stock jellybean/4.2.2 recovery xda") then make sure you follow these instructions http://forum.xda-developers.com/showthread.php?t=2636231 to flash stock recovery,then after you flashed stock recovery reboot the phone into recovery by holding power button+vol up+vol down till you see the recovery it should automatically start reflashing the phone , (before booting to recovery make sure you put the downloaded .app file onto your sd-card in the download folder.
For kitkat
follow these instructions
forum(dot)xda-developers(dot)com/ascend-p6/general/official-b511-ota-update-android-4-4-2-t2803873
just substitute . for (dot)

solutin
you must downground your phone befor you install an official rom
make search on google about a file of downground.make it on your sd card run your phone like you flash rom and restart it
after that instalany official rom you went

Lenovo A7000 STOCK MARSHMALLOW [Android 6.0] FLASHING WITHOUT SP FLASH TOOL

I recommend using the SP FLASH TOOL method for flashing stock ROM if possible.
TO FLASH THIS STOCK FIRMWARE via SP Flash TOOL Click here
THIS is Lenovo A7000 Stock "MARSHMALLOW [Android 6.0]" OTA UPDATE.
version : A7000-a_S223_160405_ROW_WC814D6764
This method is the alternative method to the SP Flash tool.
I have tested it and it works:-
First, when I am on stock Lenovo rooted lollipop ROM(ver.S153_151127_ROW).
Secondly, it also worked when I am on marshmallow rooted ROM (ver.S223_160405_ROW).
The third time it works when I am on vibe 3.5 custom ROM [MM based] with custom kernel.
If you have a rooted device, your device will unroot after installing the update.
If your device is not rooted then also it works like a charm.
To install or flash this OTA ROM
1. You should have Lenovo stock recovery installed. Use any one between method a or b
(a)If you want you can Flash stock recovery via TWRP. Click here
(Procedure is the same as installing zip file in TWRP).
(b)Flashing stock recovery via SP flash tool. Click here
(Run spflash tool Download and unzip the package, load the scatter file and flash it in "download only" mode)
After flashing recovery immediately boot into a recovery check if the recovery is installed or not if not then flash recovery again.
2. Download the stock ROM from the Lenovo server.
DOWNLOAD LINK: click here
3. Now make the two copies of the downloaded package first one in internal storage(not in any folder).
4. Rename the package to update.zip to the one in internal storage.
5. Then Boot into recovery (Power + half a second the two volume buttons), then select English as recovery language.
6. Now select install update package. It will give some warning click yes then the update will start.
In between, you will feel that update is stuck don't worry it is updating, after update your phone will reboot automatically. (update may take 10-15 minutes)
WHATEVER YOU DO AT THIS AT YOUR OWN RISK. NEITHER I NOR XDA WILL BE RESPONSIBLE IN CASE OF ANY HARDWARE/ SOFWARE DAMAGES CAUSED BY YOU TRYING THESE METHODS. YOU WILL BE SOLELY RESPONSIBLE.
IF THIS THREAD REALLY HELPS YOU THEN PLEASE TAP THANKS.

If you want to flash through SP Flash tool the go to this thread:-http://forum.xda-developers.com/android/development/lenovo-a7000-as223160405-row-andoid-6-0-t3360467/post66404777#post66404777

i am on A7000-a_plus_S141_190902_ROW.zip. will this procedure works on my device? or i need to upgrade to S153 first?

bigostoo said:
i am on A7000-a_plus_S141_190902_ROW.zip. will this procedure works on my device? or i need to upgrade to S153 first?
Click to expand...
Click to collapse
No you cannot use this and also cannot use any thread of lenovo a7000.
Because Your device is lenovo a7000 plus.
So go for lenovo a7000 plus

PrashantRana said:
THIS is Lenovo A7000 Stock "MARSHMALLOW [Android 6.0]" OTA UPDATE.
version : A7000-a_S223_160405_ROW_WC814D6764
This method is the alternative method to the SP Flash tool.
I have tested it and it works:-
First when I am on stock lenovo rooted lollipop rom(ver.S153_151127_ROW).
Secondly it also work when I am on marshmallow rooted ROM (ver.S223_160405_ROW).
If you are on rooted your phone will be unroot after installing the update.
If you are on non rooted then also it works like a charm.
To install or flash this ota ROM
1.You should have Lenovo stock recovery installed.
(a)If you don't have you can Flash stock recovery via TWRP click here
(Procedure is same as installing zip file).
(b)Flashing stock recovery via SP flashtoolclick here
(Run spflash tool Download the package,load the scatter file and flash it in "download only" mode)
After flashing recovery immediately boot into recovery.Check the recovery is installed or not if not then flash recovery again.
2.Download the stock ROM from lenovo server.
DOWNLOAD LINK:click here
3.Now make the two copy of downloaded package first one in internal storage(not in any folder)and other in micro SD(for backup).(This is my personal recommendation because if update fails we do not have to download again.)
4.Rename the package to update.zip to the one in internal storage.
5.Then Boot into recovery (Power + half a second the two volume buttons),then select English as recovery language.
6.Now select install update package.It will give some warning click yes then the update will start.
In between you will feel that update is stuck don't worry it is updating,after update your phone will reboot automatically.(update may take 10-15 minutes).
WHATEVER YOU DO AT THIS AT YOUR OWN RISK. NEITHER ME NOR XDA WILL BE RESPONBILE IN CASE OF ANY HARDWARE/ SOFWARE DAMAGES CAUSED BY YOU TRYING THESE METHODS. YOU WILL BE SOLELY RESPONSIBLE.
THANKS.
IF THIS THREAD REALLY HELP YOU THEN PLEASE TAP THANKS.
Click to expand...
Click to collapse
Sir where is mm update?
I use cm12 but i want the latest update,
Should i flash the s153 stock rom before flashing the latest update?
Or can i flash directly the MM update via twrp?
Can you provide a link the mm update for us
And the step by step procedure?
Thanks a lot sir.

I m on miui7.
Rooted
Twrp recovery
Can I follow this procedure for MM upadate??
Pls tell me.
Thanks

android_digger said:
I m on miui7.
Rooted
Twrp recovery
Can I follow this procedure for MM upadate??
Pls tell me.
Thanks
Click to expand...
Click to collapse
Till now I have not tested it upon custom ROM.
I will test it soon.It will take time. For now I advised you to use spflash tool methodhttp://forum.xda-developers.com/android/development/lenovo-a7000-as223160405-row-andoid-6-0-t3360467/post66404777#post66404777

PrashantRana said:
Till now I have not tested it upon custom ROM.
I will test it soonfor now I advised you to use spflash tool methodhttp://forum.xda-developers.com/android/development/lenovo-a7000-as223160405-row-andoid-6-0-t3360467/post66404777#post66404777
Click to expand...
Click to collapse
Sir im using cm12 custom rom too, but can i flash the stock rom s153 through twrp in this link?

PrashantRana said:
Till now I have not tested it upon custom ROM.
I will test it soon.It will take time. For now I advised you to use spflash tool methodhttp://forum.xda-developers.com/and...andoid-6-0-t3360467/post66404777#post66404777
Click to expand...
Click to collapse
Can u please tell me step by step process??
I know it's silly question but I have not tried it yet so..
Please tell me.
Once I tried but my phone is n detected.

Worked Perfectly.....Thanks a Ton !!

PrashantRana said:
THIS is Lenovo A7000 Stock "MARSHMALLOW [Android 6.0]" OTA UPDATE.
version : A7000-a_S223_160405_ROW_WC814D6764
This method is the alternative method to the SP Flash tool.
I have tested it and it works:-
Firstwhen I am on stock lenovo rooted lollipop rom(ver.S153_151127_ROW).
Secondly it also work when I am on marshmallow rooted ROM (ver.S223_160405_ROW).
If you are on rooted your phone will be unroot after installing the update.
If you are on non rooted then also it works like a charm.
To install or flash this ota ROM
1.You should have Lenovo stock recovery installed.
(a)If you don't have you can Flash stock recovery via TWRP click here
(Procedure is same as installing zip file).
(b)Flashing stock recovery via SP flashtoolclick here
(Run spflash tool Download the package,load the scatter file and flash it in "download only" mode)
After flashing recovery immediately boot into recovery.Check the recovery is installed or not if not then flash recovery again.
2.Download the stock ROM from lenovo server.
DOWNLOAD LINK:click here
3.Now make the two copy of downloaded package first one in internal storage(not in any folder)and other in micro SD(for backup).(This is my personal recommendation because if update fails we do not have to download again.)
4.Rename the package to update.zip to the one in internal storage.
5.Then Boot into recovery (Power + half a second the two volume buttons),then select English as recovery language.
6.Now select install update package.It will give some warning click yes then the update will start.
In between you will feel that update is stuck don't worry it is updating,after update your phone will reboot automatically.(update may take 10-15 minutes)
TO FLASH THIS STOCK FIRMWARE via SP Flash TOOLClick here
WHATEVER YOU DO AT THIS AT YOUR OWN RISK. NEITHER ME NOR XDA WILL BE RESPONBILE IN CASE OF ANY HARDWARE/ SOFWARE DAMAGES CAUSED BY YOU TRYING THESE METHODS. YOU WILL BE SOLELY RESPONSIBLE.
THANKS.
IF THIS THREAD REALLY HELP YOU THEN PLEASE TAP THANKS.
Click to expand...
Click to collapse
can i directly flash this marshmallow 6.0 ota to my old twrp? im currenly on LP rooted with twrp 3.0
thanks

g4rc1 said:
can i directly flash this marshmallow 6.0 ota to my old twrp? im currenly on LP rooted with twrp 3.0
thanks
Click to expand...
Click to collapse
No the ota package can only be flashed by stock recovery.or use spflash tool method

I m on miui7
Twrp
But can I flash stock recovery then install the update???

android_digger said:
I m on miui7
Twrp
But can I flash stock recovery then install the update???
Click to expand...
Click to collapse
I cannot say anything now since I have not tested it on custom ROM.you can it on your risk.I will try soon

PrashantRana said:
I cannot say anything now since I have not tested it on custom ROM.you can it on your risk.I will try soon
Click to expand...
Click to collapse
Okkey bro...thankss
---------- Post added at 11:07 AM ---------- Previous post was at 11:07 AM ----------
PrashantRana said:
I cannot say anything now since I have not tested it on custom ROM.you can it on your risk.I will try soon
Click to expand...
Click to collapse
I sent u a PM. Please check that...and please give suggestions towards that if u know.

Sir can i flash the stock rom using twrp in step 2 link?
Im using cm12.1 rom
Pls answer

PrashantRana said:
No the ota package can only be flashed by stock recovery.or use spflash tool method
Click to expand...
Click to collapse
I downloaded your stock recovery i've flashed using rashr and update from setting. As you said "works like a charm"!
thank you, keep up the good work.

Flashing Stock Rom [SP Flash Tool][Step by Step]
Instruction For Flashing Stock Rom Via SP Flash Tool Step by Stepclick here

PrashantRana said:
Instruction For Flashing Stock Rom Via SP Flash Tool Step by Stepclick here
Click to expand...
Click to collapse
after flashing and rooting i format my sdcard as internal and i notice that no zip/img file appear on twrp. has anyone encounter the same problem?

Thanks