Related
So i messed up when trying to update my watch and somehow deleted the firmware so my watch bootloops upon start-up, any way to fix this?
Im have the same problem. Im stuck in bootloop after trying to flash custom kernel. I can not rech recovery. Not original recovery or TWRP. Fastboot works. What to do?
Is there any restore image to flasH?
Here are three solutions in one answer, because you did not give quite enough info.
First, try holding the button on boot up. Hopefully that will get you into usb mode. If it works, download the sony software, and go to the help section, and download and install the update.
Option two,
Code:
adb reboot recovery
Or, download the version of twrp for your build as well as your original image, and use fastboot.
Code:
Fastboot boot twrp.img
then use twrp to install the factory zip. You can do this directly in fastboot too, but it is more difficult because fastboot only installs each image separately. If I knew what versions of software you had, I could help you find the images you need.
I have tried both fastboot flash and fastboot boot for both original recovery and also TWRP, but non of the recoverys will boot, not even with Fastboot boot.
The command lines says OK on my PC, It is getting downloaded, and it says it is booting / flashed [OKAY].
But all I get on my Smartwatch 3 is bootloop.
My Smartwatch 3 is OEM unlocked. I even tried to lock it, and unlock it again.
I have full contact with fastboot on my PC, all the commands are taken in and seems to work, but my smartwatch won't boot no system or no recoverys. Only USB-mode and Fastboot mode...
I have also tried to clear cache and userdata in fastboot after OEM Unlock.
I will try the Sony Software now. That is my last way out I Think.
The Sony PC Companion software from sony's website worked for me to save my smartwatch from bootloops . I just did a update and installed it over what was already on the smartwatch.
Thanks lekofraggle for quick answeres. I had no idea the PC Companion had this feature.
SimDroid, I am glad that helped. If it hadn't, the next step would be to flash an image through fastboot. That would be scary, because it sounds like your boot loader was corrupt. It's nice to know the usb and PcCompanion piece still worked. Another reason this watch is incredible.
Cheers.
does anyone have a download for the original (5.0.2 im guessing) ROM for this watch? I want off the rubbish 5.1.1 update before i am forced to sell the watch due to the terrible battery
The smartwatch works as it should now, original recovery and everything is back!
So, if i may go back to where it started?
I noticed now that I flashed the custom kernel for the watch built for wrong firmware. Im on 5.1.1, and there doesnt seem to be a developed shared kernel with all four cores unlocked for it.
Im also interested in where I can find those images to flash via fastboot as you mentioned lekofraggle
I've got quite a problem.
A few weeks ago, I unlocked the bootloader on my phone and flashed SuperSu to root it.
Today I decided to lock it back for personal reasons, wiping everything.
After it wiped, the phone kinda softbricked. When it turns on the OnePlus logo flashes for a second and turns off.
Won't let me unlock bootloader again, got stock recovery. Tried to use sideload, but ADB can't read the file. My guess it's too large.
What can I do?
I had same problem. Follow the steps. Unlock it again and reboot to the system.
There enable developer option, enable debugging, enable unlock bootloader option.
Rebooted to fastboot mode
Install stock recovery
Adb sideload 3.2 full firmware.
After that reboot your phone to fastboot mode.
Unlock bootloader.
This should do it.
Sent from my ONEPLUS A3003 using Tapatalk
It's like you didn't even read what I wrote...
I said it doesn't boot to system, OnePlus logo appears for a split second and phone turns off.
Bootloader is locked and I cannot flash anything.
ADB Sideload won't read files. Gives the 'cannot read' error.
You know that you can load to bootloader by pressing volume up and power button right?
Sent from my ONEPLUS A3003 using Tapatalk
Monskiller said:
I've got quite a problem.
A few weeks ago, I unlocked the bootloader on my phone and flashed SuperSu to root it.
Today I decided to lock it back for personal reasons, wiping everything.
After it wiped, the phone kinda softbricked. When it turns on the OnePlus logo flashes for a second and turns off.
Won't let me unlock bootloader again, got stock recovery. Tried to use sideload, but ADB can't read the file. My guess it's too large.
What can I do?
Click to expand...
Click to collapse
You should be fine so long as you didn't deactivate the"OEM UNLOCK " option from the developer setting....
do the following
1. press and hold the volume up an power buttons simultaneously to enter the boot loader menu.
2.select start option from the bootloader menu sorry that menu is the boot loader.
3. now connect to pc and use the "fastboot devices" command to see if your pc recognizes you op3 as an android device.
4.type "fastboot oem unlock"
5. flash the custom recovery thru fastboot
5. enter custom recovery and flash your desired rom.
hope this works for you!
ajaysoranam said:
You should be fine so long as you didn't deactivate the"OEM UNLOCK " option from the developer setting....
do the following
1. press and hold the volume up an power buttons simultaneously to enter the boot loader menu.
2.select start option from the bootloader menu sorry that menu is the boot loader.
3. now connect to pc and use the "fastboot devices" command to see if your pc recognizes you op3 as an android device.
4.type "fastboot oem unlock"
5. flash the custom recovery thru fastboot
5. enter custom recovery and flash your desired rom.
hope this works for you!
Click to expand...
Click to collapse
And if by mistake I have deactivate the "OEM UNLOCK " what can I do?
I relocked the bootloader. Which wiped to factory reset.
That wipe deactivated the ability to unlock bootloader until reactivated from the system, which I cannot get to because the phone turns off/bootlops before loading it.
This happened quite a few times on this forum, there is really no reason to relock the bootloader on the op3, it is covered through warranty, but u will have to contact oneplus and they should walk u through and send u files to unbrick it if u r lucky
ovidiu1982 said:
And if by mistake I have deactivate the "OEM UNLOCK " what can I do?
Click to expand...
Click to collapse
then you better get in touch with the op customer service. they will, from what i know, fix it thru a remote connection sitting.
I have no solution for you, but I wonder if you went back to stock recovery first before you relocked the bootloader? I think if you have TWRP and try to relock the bootloader, this happens. NOT that its helpful to you, but if this is the case and you can verify it, might help others avoid making the same mistake.
As far as your problem is concerned, I would look for unbricking guides. I know I saw at least one guide that lets you recreate the entire partition table manually and make it just like new for the OP2 (and has the company's blessings to do so). So it should apply here as well. Sorry, do not remember where I saw this, but must have been either on xda or the oneplus forums.
karthikrr said:
I have no solution for you, but I wonder if you went back to stock recovery first before you relocked the bootloader? I think if you have TWRP and try to relock the bootloader, this happens. NOT that its helpful to you, but if this is the case and you can verify it, might help others avoid making the same mistake.
As far as your problem is concerned, I would look for unbricking guides. I know I saw at least one guide that lets you recreate the entire partition table manually and make it just like new for the OP2 (and has the company's blessings to do so). So it should apply here as well. Sorry, do not remember where I saw this, but must have been either on xda or the oneplus forums.
Click to expand...
Click to collapse
I have stock recovery. I did boot TWRP first and let it change system by mistake, but reflashed stock later. That's what might have caused the bootloop once I relocked.
So I guess if you decide to relock in the future, don't flash TWRP, cause it bootloops, even if stock is reflashed.
Bro don't worry now.
I am gonna guide you out of this.
First install an adb package like this.
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Now get a toolkit like this.
http://forum.xda-developers.com/oneplus-3/development/toolkit-oneplus-3-toolkit-unlock-t3398799
Try to connect to fastboot and check for your device in the toolkit.
If failed then kill process adb in your task manager.
Now once connected.
Check OEM status and bootloader status.
Unlock if required.
Now.
Push twrp to your phone .
Then boot into it through the toolkit.
Now load a full ROM.
http://forum.xda-developers.com/oneplus-3/development/rom-op3lite-debloated-tweaked-fast-t3404996
Just copy paste it using your file manager on PC.
Them flash first make it boot and then root.
Hope this helped.
Monskiller said:
I have stock recovery. I did boot TWRP first and let it change system by mistake, but reflashed stock later. That's what might have caused the bootloop once I relocked.
So I guess if you decide to relock in the future, don't flash TWRP, cause it bootloops, even if stock is reflashed.
Click to expand...
Click to collapse
Nah, I think this happens only if you let TWRP modify the system partition. But, I have not and am not willing to test it out
karthikrr said:
Nah, I think this happens only if you let TWRP modify the system partition. But, I have not and am not willing to test it out
Click to expand...
Click to collapse
Don't test it. I've already done it by mistake.
It replaced recovery with TWRP by allowing the modification of system and even after reflashing stock it'll bootloop on relocking recovery.
So I found something useful then.
Hey, i think i found a solution for you. I don't know if i can post here xda thread links, so search "EDL Mode xda" on Google and the first link it is. Hope i helped
The backstory: I have no experience with rooting and or flashing custom ROMs. Prior to today my ze551ml was completely stock, running on the official android M update. I had a need to do a factory reset, but the phone would simply reboot. I assumed this was a problem with the update so I download and attempted to install the downgrade to l. Naturally it crashed mid downgrade and I thought it to be bricked. So, I started Googling and realized I was able to get into fastboot mode, but not recovery. Following a guide I located I attempted to flash the preroot ROM located at the link below:
http://forum.xda-developers.com/zenfone2/development/rom-pre-root-img-t3079590
Well, it appeared to have worked, but now the phone refused to boot at all after being turned off. So, more Googling and I proceeded to follow the full unbricking guide below:
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Partway through step 1.3 the phone restarted itself and booted right up into Android L! Success I thought to myself, but it was not to be. I proceeded to download the FOTA L update and it downloaded fine, but when I clicked to install it simply rebooted the phone. Tried a couple of other times with the same result. I realized that Supersu was installed so I did the full unroot assuming that was the problem, but to no avail. It appears that the updates can't install because the phone is incapable of entering fastboot or recover mode. Anytime I attempt to enter fastboot via hard key or through adb the phone hangs on the ASUS logo. Adb detects the phone when it's connected via USB, but of course fastboot can't because I can't get it into fastboot mode at all.
Any tips on how to get fastboot operational again so I can start applying updates again? Every guide I've located has started with "boot into fastboot/recovery" which simply isn't an option. Any help is appreciated.
Edit: Well, I think I've reached the end of the internet trying to google for a solution. The phone works, but it looks like it's stuck on build 2.13.40.13 until the end of its life. If anybody has any ideas I'm still hoping for a solution, but I can't find anything describing how to restore fastboot if the OS is intact.
kidnova said:
The backstory: I have no experience with rooting and or flashing custom ROMs. Prior to today my ze551ml was completely stock, running on the official android M update. I had a need to do a factory reset, but the phone would simply reboot. I assumed this was a problem with the update so I download and attempted to install the downgrade to l. Naturally it crashed mid downgrade and I thought it to be bricked. So, I started Googling and realized I was able to get into fastboot mode, but not recovery. Following a guide I located I attempted to flash the preroot ROM located at the link below:
http://forum.xda-developers.com/zenfone2/development/rom-pre-root-img-t3079590
Well, it appeared to have worked, but now the phone refused to boot at all after being turned off. So, more Googling and I proceeded to follow the full unbricking guide below:
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Partway through step 1.3 the phone restarted itself and booted right up into Android L! Success I thought to myself, but it was not to be. I proceeded to download the FOTA L update and it downloaded fine, but when I clicked to install it simply rebooted the phone. Tried a couple of other times with the same result. I realized that Supersu was installed so I did the full unroot assuming that was the problem, but to no avail. It appears that the updates can't install because the phone is incapable of entering fastboot or recover mode. Anytime I attempt to enter fastboot via hard key or through adb the phone hangs on the ASUS logo. Adb detects the phone when it's connected via USB, but of course fastboot can't because I can't get it into fastboot mode at all.
Any tips on how to get fastboot operational again so I can start applying updates again? Every guide I've located has started with "boot into fastboot/recovery" which simply isn't an option. Any help is appreciated.
Edit: Well, I think I've reached the end of the internet trying to google for a solution. The phone works, but it looks like it's stuck on build 2.13.40.13 until the end of its life. If anybody has any ideas I'm still hoping for a solution, but I can't find anything describing how to restore fastboot if the OS is intact.
Click to expand...
Click to collapse
You have to use full unbrick method(xfstk + raw) to restore ur device fully
xfstk will restore ur fastboot image
yakub234go said:
You have to use full unbrick method(xfstk + raw) to restore ur device fully
xfstk will restore ur fastboot image
Click to expand...
Click to collapse
Thanks for the response. I've tried this a dozen times, but unfortunately (this is going to sound weird) since it's not completely bricked it is only detected as Moorefield for a few seconds when started. This allows the xfstk tool to detect it and begin the download, but not long enough to complete the process so it times out. The only development access I have to the phone now is via adb, but since I don't have root I'm very limited in what I can do via command line. Since I can't access fastboot I can't achieve root. It's just a comedy of errors now.
kidnova said:
The backstory: I have no experience with rooting and or flashing custom ROMs. Prior to today my ze551ml was completely stock, running on the official android M update. I had a need to do a factory reset, but the phone would simply reboot. I assumed this was a problem with the update so I download and attempted to install the downgrade to l. Naturally it crashed mid downgrade and I thought it to be bricked. So, I started Googling and realized I was able to get into fastboot mode, but not recovery. Following a guide I located I attempted to flash the preroot ROM located at the link below:
http://forum.xda-developers.com/zenfone2/development/rom-pre-root-img-t3079590
Well, it appeared to have worked, but now the phone refused to boot at all after being turned off. So, more Googling and I proceeded to follow the full unbricking guide below:
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Partway through step 1.3 the phone restarted itself and booted right up into Android L! Success I thought to myself, but it was not to be. I proceeded to download the FOTA L update and it downloaded fine, but when I clicked to install it simply rebooted the phone. Tried a couple of other times with the same result. I realized that Supersu was installed so I did the full unroot assuming that was the problem, but to no avail. It appears that the updates can't install because the phone is incapable of entering fastboot or recover mode. Anytime I attempt to enter fastboot via hard key or through adb the phone hangs on the ASUS logo. Adb detects the phone when it's connected via USB, but of course fastboot can't because I can't get it into fastboot mode at all.
Any tips on how to get fastboot operational again so I can start applying updates again? Every guide I've located has started with "boot into fastboot/recovery" which simply isn't an option. Any help is appreciated.
Edit: Well, I think I've reached the end of the internet trying to google for a solution. The phone works, but it looks like it's stuck on build 2.13.40.13 until the end of its life. If anybody has any ideas I'm still hoping for a solution, but I can't find anything describing how to restore fastboot if the OS is intact.
Click to expand...
Click to collapse
seems like you did not install droidboot.bin correctly... only way is use xFSTK again.i have updated the link to latest raw firmware 2.20.40.194 and use the same guide and commands..
sukhwant717 said:
seems like you did not install droidboot.bin correctly... only way is use xFSTK again.i have updated the link to latest raw firmware 2.20.40.194 and use the same guide and commands..
Click to expand...
Click to collapse
The problem is that it's only recognized as Moorefield for a few seconds which isn't enough time for xFSTK to complete the install. Do you know of a way to force the device to stay connected as Moorefield?
kidnova said:
The problem is that it's only recognized as Moorefield for a few seconds which isn't enough time for xFSTK to complete the install. Do you know of a way to force the device to stay connected as Moorefield?
Click to expand...
Click to collapse
Plug the phone to the PC, be sure the phone is completely off and then hold power + vol- for a few seconds. You must see the "Moorefield" driver permanent in the device manager.
Btw... I got the same problem (four lines, not bootloader, not OS; xFSTK FW+OS failed) and I'm stuck in this step :/
mrperalta said:
Plug the phone to the PC, be sure the phone is completely off and then hold power + vol- for a few seconds. You must see the "Moorefield" driver permanent in the device manager.
Btw... I got the same problem (four lines, not bootloader, not OS; xFSTK FW+OS failed) and I'm stuck in this step :/
Click to expand...
Click to collapse
I've tried this many times, but it only shows Moorefield for a few seconds. I'm assuming this is because it has a fully operational OS so it doesn't stay in the generic USB device mode.
EDIT: I misread your original post. Holding power and volume DOWN does keep connect it in Moorefield. Thanks so much for that. The problem now is that once xFSTK gets to downloading the OS it reboots the phone which takes it out of USB mode and disconnects the tool. I'm still stuck where I was before, but that's a little progress. Any other thoughts?
New update. I'm able to get to the point of loading the OS from xFSTK by skipping the FW part, however it continuously fails. My assumption is because it can't overwrite the existing OS. Any other ideas?
kidnova said:
New update. I'm able to get to the point of loading the OS from xFSTK by skipping the FW part, however it continuously fails. My assumption is because it can't overwrite the existing OS. Any other ideas?
Click to expand...
Click to collapse
Kidnova, reading this post I could fixed my problem. The "issue" was in the xFSTK where you put the flag (0x800000807). A guy on the threat said to put "0x80000807" instead of "0x800000807" (note that there is "0" from difference).
"those who are not able to keep device connected. take care of few steps
1. in xFSTK option menu change the flag override value to 0x80000807 not 0x800000807 ( don't forget to click gp value over ride)
2. while connecting to xFSTK attach usb to computer. hold power button for 20 seconds to make sure it power downs completely. then hold the power button down and click power button. wait till device vibrate or computer makes detection sound. leave power button but keep holding the volume button for few seconds"
Click to expand...
Click to collapse
-sukhwant717
mrperalta said:
Kidnova, reading this post I could fixed my problem. The "issue" was in the xFSTK where you put the flag (0x800000807). A guy on the threat said to put "0x80000807" instead of "0x800000807" (note that there is "0" from difference).
-sukhwant717
Click to expand...
Click to collapse
You guys are lifesavers! I've got fast boot again. Now to see if I can continue without screwing it up.
FINAL EDIT: I have a 100% functional stock Zenfone 2. Thanks everybody for your help.
kidnova said:
You guys are lifesavers! I've got fast boot again. Now to see if I can continue without screwing it up.
FINAL EDIT: I have a 100% functional stock Zenfone 2. Thanks everybody for your help.
Click to expand...
Click to collapse
Hi, got the same issues, I've read many posts. Tried all of the million options. What was your final way of doing it, do you remember?
Hello, has been a w hile since I was here last time. However, my moto g 5g plus gives me a hard time now. I was using it and at some point the power button stopped working. First it worked only randomly but now it is dead. Before the phone shut down i was able to test the fingerprint sensor and it worked. The last few days i noticed that the connection resets randomly from 5G to 4G to H+ and sometimes i had to restart the phone to have a working connection. I was thinking there is a firmware bug in the stock firmware that continues showing up over time. Last time i did a firmware recovery using the motorola rescue tool but that doesen't work anymore because i cant enter boot loader mode. I have seen that there is the qualcom flash tool out there and im wondering if im able to flash the device without bootloader mode as im not able to start it. And if the problem is software related or not. For the qualcom flash tool i probably need the "firehose" files, where can i find the right one for my device?
I have an update, I think it is a software problem. I have tried unlocking the bootloader and as soon I did everything worked same before. Then I flashed linageos and as as able to use it for one day until (when playing pokemon go it happened again) now the power button responds with delay. But it responds. I have tried to reflash lineage and stock using rescue assistant but nothing helps. Then I tried reboot in edl mode for blankflash but that one also doesent work. It starts the process when it sees the device but it terminates with an error. I have dumped all partitions using the recovery shell. But not sure where to search for as I don't have a dump of the stock partitions. I think there has been some corruption of one of the data in _a slot and now _b slot too. Someone knows what and where to look for? Maybe I need a dump of stock device?
It seems there is something wrong with bootloader. Now I'm not able to flash in fastboot mode. But it works when I flash the gpt.bin after restart in fastboot. I start the download on the PC and then connect the phone and power up in bootloader mode. After that I can flash as normal but after reboot everything same before, no fastboot working. And if I flash stock ROM and lock the bootloader it says no operating system found. I have tried using blankflash from lolinet but that one also doesent work. It recognises the device but then it stops. Is it possible that I have got this sort of thing ota? This is so weird. The power button works but just delayed. Is it on a different chip what is maybe broken? But that would be very strange. I have another phone I treat not as nice as this one and that works like new.
Ah I enter edl by using linage recovery
Deleted all the partitions, now it seems the device doesn't boot the stock ROM if I flash it. What are the essential partitions needed to boot the stock ROM? How can I restore the missing partitions? Thanks
Hello,
I usually come here to root my phone and choose the best ROM, but this time I'm here because of a problem with the official ROM. I did a simple OTA android update this weekend, and the phone never restarted. There was enough battery so nothing to report during the install. I'm stuck on an infinite bootloop and the recovery commands take me to a no command.
Beyond having lost all my data, I'm worried because no command is working. I have already followed all the tutorials on youtube (including the most improbable techniques of hitting the back of the smartphone or putting it in the freezer for 10min, I know it's stupid, but when you're desperate you try everything).
So I'm coming here to ask for your help, hoping that someone will give me a solution to at least flash a basic image and start over.
Regards
Thiiibs said:
Hello,
I usually come here to root my phone and choose the best ROM, but this time I'm here because of a problem with the official ROM. I did a simple OTA android update this weekend, and the phone never restarted. There was enough battery so nothing to report during the install. I'm stuck on an infinite bootloop and the recovery commands take me to a no command.
Beyond having lost all my data, I'm worried because no command is working. I have already followed all the tutorials on youtube (including the most improbable techniques of hitting the back of the smartphone or putting it in the freezer for 10min, I know it's stupid, but when you're desperate you try everything).
So I'm coming here to ask for your help, hoping that someone will give me a solution to at least flash a basic image and start over.
Regards
Click to expand...
Click to collapse
Since you can get into bootloader and it's locked, go to platform tools and unlock the bootloader. Then you can flash the factory image and proceed from there. This will wipe data.
The other image is the screen prior to entering recovery via pressing power button and vol up.
I would recommend turning on USB debugging first thing when getting any phone.
Android Flash Tool
flash.android.com
The No Command Screen is normal. You just need to press and hold the Power Button and while doing, so press and release the Volume Up key (after about 5 seconds) and then release the Power key as well. This will take you to stock recovery. From there, you could sideload the OTA package [works on a locked bootloader as well] but as already told in a post just above mine, you need to have enabled USB Debugging beforehand.
The bootloader is locked but you can access it, so go to platform tools and unlock it. After that, you can flash the factory image and carry on. It will erase all data.
To sideload an OTA in stock recovery you shouldn't need to have USB Debugging enabled. Being in sideload mode enables a very limited set of ADB commands on Pixels, including adb sideload <imagename>.zip. I'm not aware that this has changed.
To unlock your bootloader you will need to have OEM Unlocking enabled in Developer Options beforehand.