Please Help,
my previous SKU TW and has been updated to SKU WW, after that i root and no problems
problems arise when an update after the completion of the update ota, afterrestart and appeared logo usb
I turn off HH then I try to get in recovery (press vol up + power) persists logo usb
I unplug and then I turn to normal as usual there is no problem and can get android os
but at the time of press the power button + vol up always appear usb logo
sorry for my bad english
Related
Hi, the only thing I can do with my phone is to put it in ''Download Mode'' and make a ''Factory Reset''
I tried to kdz 3 times but when it complete, the phone restart and bootloop in the very first LG logo and the red led is on...
When the phone is unplugged, i press the power button, but nothing happen...i cannot access to recovery mode...only download mode by pressing both Vol+ & Vol- while plugging to computer...
EDIT: Resolve ( thanks to adfurgerson). Mod, you can delete this thread.
hi every one
i have samsung sm-110 i have rooted it using odin3 and its goes smothing succes
after maybe 1 month i got update for superuser (i press update by cwm or some thing like this HTC
then the device boot on recovery mood v6.0.4.8 and when ever i restart its boot on recovery mood after show device model logo its boot on recovery so i try to flash the device using oden3 i download offical rom and when i make device on download mood i click start on odin i get failed
so i try to Disconnect and reconnect then press start no thing happen i just Disconnect and try to restart the sm-t110 br press (v down +home + power)
i got black screen (when i connect the sm-t110 to the laptop i got usb sound but with black screen)
i try to press (v up + power + home ) i get ( Disconnect and reconnect usb sound with black screen on sm-t110)
and odin3 didnt read the device any more
sry for bad english i hope u guys understand and thanks
I was provided this device to try and help resolve the issue. I am not sure how it got to this point. I believe that it was rooted with a custom ROM, then the individual tried to install a stock ROM (method unknown).
The current situation is:
Galaxy Tab S 10.5 SM-T800 stuck in a bootloop with the TWRP logo on the screen. I can not get the tablet to go into download mode. I have tried all of the different methods to enter download mode, i.e. Power & Vol - & Home, Drain the battery > Plug into PC while holding Vol - & Home, Power & Vol + & Vol -. None of these combinations do anything. The only thing I can do to get a response is to press Power & Vol +, which reboots the device right back into the TWRP loop after the Samsung Logo. Power button alone does nothing.
The device is seen by Windows with the Samsung Drivers but is not mounted to a drive letter, and I can not mount it.
ADB , fastboot and Odin do not see the device.
I would like to flash a new rom either custom or stock, but I need to be able to get the device into download mode so it can be seen by odin.
Any help would be great.
Mike
Probably just timing and pilot error this one. I've never known of any Samsung device boot but be incapable of booting to download mode as download mode is bootloader related.
No working bootloader means dead device.
No matter what state the device is in at the moment with the usb cable removed, hold POWER + VOL DOWN (not up) + HOME until the Samsung boot logo comes up, hold for another couple of seconds then release. Download mode should appear.
I know it should be easy....
I know it should work but it is not, I will make a vid of the process and post. I can not make heads or tails.
Mike
ashyx said:
Probably just timing and pilot error this one. I've never known of any Samsung device boot but be incapable of booting to download mode as download mode is bootloader related.
No working bootloader means dead device.
No matter what state the device is in at the moment with the usb cable removed, hold POWER + VOL DOWN (not up) + HOME until the Samsung boot logo comes up, hold for another couple of seconds then release. Download mode should appear.
Click to expand...
Click to collapse
Is the home button actually working, are you pressing it firm enough?
If the home button doesn't register then the tablet will simply reboot.
Its a bit odd why twrp doesn't fully boot though unless it's the wrong one.
Does it hang at the twrp logo or continually reboot?
Hi folks
Anyone seen this issue before (see pic) ?
When I try to enter download / bootloader mode I get stuck on red text 'entering fastboot mode... ".
Odin cannot detect the phone connected to PC
The only way out is to press and hold power and volume down for 5 seconds to reboot normally
Tried factory reset and also tried clear data & clear cache partitions in recovery mode.
FYI I'm on O2 UK branded July 2020 stock firmware
With this steps the problem will be solved:
Power Off
Insert cable on pc
Press Vol Up + Vol Down
Insert cable on phone without releasing the buttons
But I agree, the 'old' method does not work anymore, I am getting the same message as the OP.
M1LL3R said:
With this steps the problem will be solved:
Power Off
Insert cable on pc
Press Vol Up + Vol Down
Insert cable on phone without releasing the buttons
Click to expand...
Click to collapse
Amazing worked first time ! Thanks
Is this a very recent change by Samsung? I ran various Google searches but could not find any relevant article on the web or on xda forums
I followed this guide to get my S20+ rooted: https://forum.xda-developers.com/t/...root-s20-series-and-upgrade-firmware.4079353/
I wanted to return my phone to it's original state so I tried uninstalling Magisk through the app but am now stuck in a bootloop where I can't seem to enter recovery or download mode.
The screen pops up and shows the logo, followed by the bootloader unlocked warning, back to the logo, and then restarts this process.
I can't seem to turn it off either. Have to wait for it to be 0%, but once I connect it to a charger, it automatically turns on again.
Can anyone help me solve this problem?
Recovery mode: volume up button and plug it into PC via cable, press power
Download mode: both volume buttons and plug it into PC via cable, press power
both modes only work if you have a cable connected