Related
I apologize in advance if any of this makes you roll your eyes at my stupidity.
Good Afternoon
I have an ATT samsung galaxy s3, Because of the glitches with 4.3 I was experiencing I decided to install custom software on my phone. So I looked up guides and got everything I needed. I did manage to get root access, and verified with super user. I also installed TWRP and CWM because each kept giving me errors when I tried to install CM 11 onto my phone. I tried CWM first, and when that didn't work I tried TWRP. It says there was no MD5 information found when I try to install any mod. how ever I have used the md5 file checker program and the MD5 matches up to what was listed in this one for example.
http://forum.xda-developers.com/show....php?t=2518998
Download:
CM 11.0 Unofficial Beta 7 for d2tmo and d2att
MD5: ef93957db1e6704f23f9015231a82826
So the MD5 matches, yet when I try to install it keeps giving me errors. I also tried other versions of CM that I found on here via links. Right now my phone has no OS as another guide I read some where also said to wipe system data (sorry if that was stupid, I was just following a guideline) And even more stupid, no I don't have a backup because in my naivety and stupidity I didn't think I'd need one as it seemed so simple from all the guides and videos I'd seen.
Yesterday a friend of mine knowledgeable with tech stuff took one of the original stock Image ROMs I'd downloaded and using linux and some program he managed to do some crazy stuff I can't even describe on here. All I saw was a lot of typing of command lines and it got my phone working again, how ever it wasn't exactly the stock image I guess because the phone would not make or receive calls/texts.
Since my phone was powering on again and the android OS was loading I figured I could connect it to my computer and use KIES to download the official latest update so my phone would be back on the legit software. But trying to do that...well broke my phone again. So I'm at a loss now of what to do. Right now I can still get to download mode on my phone, but when I try to get into recovery mode I get an error that "firmware upgrade encountered an issue. Please select recovery mode in KIES & try again." Which I've tried, and every time I try it gives me an error message.So I'm at a loss of what to do next.
So I'd like to get a working OS on my phone asap so I can get calls and texts.
Any help would be greatly appreciated. And being new I'm sorry if I broke any taboos or did not give some information that is typically given when describing a problem.
gvazquez82 said:
I apologize in advance if any of this makes you roll your eyes at my stupidity.
Good Afternoon
I have an ATT samsung galaxy s3, Because of the glitches with 4.3 I was experiencing I decided to install custom software on my phone. So I looked up guides and got everything I needed. I did manage to get root access, and verified with super user. I also installed TWRP and CWM because each kept giving me errors when I tried to install CM 11 onto my phone. I tried CWM first, and when that didn't work I tried TWRP. It says there was no MD5 information found when I try to install any mod. how ever I have used the md5 file checker program and the MD5 matches up to what was listed in this one for example.
http://forum.xda-developers.com/show....php?t=2518998
Download:
CM 11.0 Unofficial Beta 7 for d2tmo and d2att
MD5: ef93957db1e6704f23f9015231a82826
So the MD5 matches, yet when I try to install it keeps giving me errors. I also tried other versions of CM that I found on here via links. Right now my phone has no OS as another guide I read some where also said to wipe system data (sorry if that was stupid, I was just following a guideline) And even more stupid, no I don't have a backup because in my naivety and stupidity I didn't think I'd need one as it seemed so simple from all the guides and videos I'd seen.
Yesterday a friend of mine knowledgeable with tech stuff took one of the original stock Image ROMs I'd downloaded and using linux and some program he managed to do some crazy stuff I can't even describe on here. All I saw was a lot of typing of command lines and it got my phone working again, how ever it wasn't exactly the stock image I guess because the phone would not make or receive calls/texts.
Since my phone was powering on again and the android OS was loading I figured I could connect it to my computer and use KIES to download the official latest update so my phone would be back on the legit software. But trying to do that...well broke my phone again. So I'm at a loss now of what to do. Right now I can still get to download mode on my phone, but when I try to get into recovery mode I get an error that "firmware upgrade encountered an issue. Please select recovery mode in KIES & try again." Which I've tried, and every time I try it gives me an error message.So I'm at a loss of what to do next.
So I'd like to get a working OS on my phone asap so I can get calls and texts.
Any help would be greatly appreciated. And being new I'm sorry if I broke any taboos or did not give some information that is typically given when describing a problem.
Click to expand...
Click to collapse
same error happened to me yesterday and spent the whole day figuring it out. get into download mode. boot up ODIN and reflash your preferred custom recovery. after that, i couldn't find anything else to restore my phone with so i installed 4.3 leaked from here. doesn't matter which one you select. http://forum.xda-developers.com/showthread.php?t=2498233. place it on your sd card and head into recovery mode, wipe data/factory reset and cache. head to install zip from sd card and select the 4.3 zip you downloaded. reboot system and it should work. the at&t boot screen takes a while so be patient
MrHaPpY66 said:
same error happened to me yesterday and spent the whole day figuring it out. get into download mode. boot up ODIN and reflash your preferred custom recovery. after that, i couldn't find anything else to restore my phone with so i installed 4.3 leaked from here. doesn't matter which one you select. http://forum.xda-developers.com/showthread.php?t=2498233. place it on your sd card and head into recovery mode, wipe data/factory reset and cache. head to install zip from sd card and select the 4.3 zip you downloaded. reboot system and it should work. the at&t boot screen takes a while so be patient
Click to expand...
Click to collapse
First of all thank you for trying to help me, I hope you are having a good Thanks Giving.
I used the thread you linked to, and downloaded the version with out knox. I followed the instructions
transferred ROM and flashed kernel file to SD card
used odin to flash TWRP,
used twrp to flash rom and kernel file.
and it takes the file thankfully, there's only one issue. My phone can't make or receive calls/texts. Is yours able to?
I messed up and was playing with things That I had no business playing with and decided that I should do a restore of a backup (TWRP) I made as soon as I rooted the 4.3 OTA. well it has soft bricked my phone. it was a TWRP 4.3 Nandroid and has me messed up a little.
so far I tried My nandroid (no dice now a soft brick) cleared cache and dalvik, It was booting as far as the white at&t spinning thing,
Factory reset same on booting,
Tried a format of the internal sd this is where it gets sketchy it now goes as far as the second samsung screen(the one that says Samsung GALAXY S III)
4.3 OTA .zip (no dice TWRP wont flash it) same on the booting 2nd samsung boot screen
Tried the files in the link above and got a Hard brick
Used the debricking .IMG file and got TWRP and download mode back
Any suggestions?
Looks like I might need a JTAG/RIFF BOX for this one. If nothing else I spent many Hours of darkness discovering the darkness of android 4.3
If I get recovered from this and with a different rom like 4.1.2 I will be happy. the 4.3 OTA was very stable but I did miss wifi tether and the whole hardbrick thing was kind of a bummer. it would be real nice to have an ODIN file to fix this (AHEM samsung) or atleast perhaps stopped the progression of it to a hard brick.
New update
I got my phone booting up again however there is a catch. That unbrick.img file on my 16GB sd card is still required to boot the phone and I have no cell service what so ever. Tried to check apn settings because at home I sometimes get poor service and I run net10 so I was going to fix my apn and it says insert sim??? the sim is properly inserted???
Next Update
the bootloader I flashed apparently flashed to the external sd card? I flashed another one and it is booting from the internal sd. I had to flash a different modem the one in the bootloader/modem file I flashed from the link above didnt take? I got most everything sorted out, but im getting tired, it has been an all night adventure. its 08:23 est now
sorry for the delay in updating this I had to get some rest.
theramsey3 said:
I messed up and was playing with things That I had no business playing with and decided that I should do a restore of a backup (TWRP) I made as soon as I rooted the 4.3 OTA. well it has soft bricked my phone. it was a TWRP 4.3 Nandroid and has me messed up a little.
so far I tried My nandroid (no dice now a soft brick) cleared cache and dalvik, It was booting as far as the white at&t spinning thing,
Factory reset same on booting,
Tried a format of the internal sd this is where it gets sketchy it now goes as far as the second samsung screen(the one that says Samsung GALAXY S III)
4.3 OTA .zip (no dice TWRP wont flash it) same on the booting 2nd samsung boot screen
Tried the files in the link above and got a Hard brick
Used the debricking .IMG file and got TWRP and download mode back
Any suggestions?
Looks like I might need a JTAG/RIFF BOX for this one. If nothing else I spent many Hours of darkness discovering the darkness of android 4.3
If I get recovered from this and with a different rom like 4.1.2 I will be happy. the 4.3 OTA was very stable but I did miss wifi tether and the whole hardbrick thing was kind of a bummer. it would be real nice to have an ODIN file to fix this (AHEM samsung) or atleast perhaps stopped the progression of it to a hard brick.
New update
I got my phone booting up again however there is a catch. That unbrick.img file on my 16GB sd card is still required to boot the phone and I have no cell service what so ever. Tried to check apn settings because at home I sometimes get poor service and I run net10 so I was going to fix my apn and it says insert sim??? the sim is properly inserted???
Click to expand...
Click to collapse
Go into Settings, About Phone, Status and check to see if your IMEI and Serial Number are present. If you only lost your IMEI there's a guide on how to inject it back (I'm not sure where the guide is). However if you've lost your serial number and don't have a Nandroid that can restore it I don't know what to do.
spongdangly said:
Go into Settings, About Phone, Status and check to see if your IMEI and Serial Number are present. If you only lost your IMEI there's a guide on how to inject it back (I'm not sure where the guide is). However if you've lost your serial number and don't have a Nandroid that can restore it I don't know what to do.
Click to expand...
Click to collapse
i have my serial number showing but no IMEI number. So is that all that's needed for me to be able to call and text again?
gvazquez82 said:
i have my serial number showing but no IMEI number. So is that all that's needed for me to be able to call and text again?
Click to expand...
Click to collapse
I updated my post above and showed my soultion. I simply had to flash a new modem and almost everything was kosher. I also had to flasah a different kernel but that was for preference not because things werent working.
http://forum.xda-developers.com/showpost.php?p=47817339&postcount=23 Modem download
I used that modem, flash it and see if your problems go away. I use Net10 so after I flashed the Modem I had to create an APN aswell, but that is nothing new for me.
theramsey3 said:
I updated my post above and showed my soultion. I simply had to flash a new modem and almost everything was kosher. I also had to flasah a different kernel but that was for preference not because things werent working.
http://forum.xda-developers.com/showpost.php?p=47817339&postcount=23 Modem download
I used that modem, flash it and see if your problems go away. I use Net10 so after I flashed the Modem I had to create an APN aswell, but that is nothing new for me.
Click to expand...
Click to collapse
I will give that a shot, but what's an APN, sorry. And how do I create one, and is it needed for me to do so?
gvazquez82 said:
i have my serial number showing but no IMEI number. So is that all that's needed for me to be able to call and text again?
Click to expand...
Click to collapse
It should be, I'm working right now so I don't have time to fine the guide on how to inject your IMEI. If I remember correctly it involves using QPST. If you have an old (or any) working Nandroid backup that should fix the problem.
FYI, make sure you don't use the guide for the international S3 as it has different hardware and folder structure/contents.
As for the APN, it should automatically fill itself in since it reads it off the SIM Card (I might be wrong).
theramsey3 said:
I updated my post above and showed my soultion. I simply had to flash a new modem and almost everything was kosher. I also had to flasah a different kernel but that was for preference not because things werent working.
http://forum.xda-developers.com/showpost.php?p=47817339&postcount=23 Modem download
I used that modem, flash it and see if your problems go away. I use Net10 so after I flashed the Modem I had to create an APN aswell, but that is nothing new for me.
Click to expand...
Click to collapse
I tried it and it work!!!!!!!!!!!!!!!!!
67 texts just came in. Sir, I thank you oh so kindly. You have made this gloomy rainy day oh so joyous.
No problem. Glad I could help you.
The real credit should go to -Mr.X-, loserskater and anyone else(no disrespect there were alot of files) whose stuff I tried to flash lastnight thank you all in the dev community who contribute.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
So I guess the next question, do I try again to install kit kat on my phone.
I've already made bucks of my existing working phone haha....but I'd still like to have kitkat in place. I believe the issue of my phone not reading MD5 confirmations would still be in place, does anyone know how to remedy that situation?
At the same time I'm more than happy to leave my phone as is.
gvazquez82 said:
So I guess the next question, do I try again to install kit kat on my phone.
I've already made bucks of my existing working phone haha....but I'd still like to have kitkat in place. I believe the issue of my phone not reading MD5 confirmations would still be in place, does anyone know how to remedy that situation?
At the same time I'm more than happy to leave my phone as is.
Click to expand...
Click to collapse
Pretty sure you can turn off MD5 checks in TWRP. Probably in CWM too. Sorry if this has been mentioned. Didn't have time to read the whole thread. Just skimmed through.
2nd, there is a major difference between an IMEI that reads 0 and an IMEI that shows unknown. If it shows an unknown simply reflash your ROM and modem and you will be good to go. Sometimes a reboot is all you need. If your IMEI is showing a 0 on the other hand its gone and will require that it be injected back in which is a messy situation that usually results in tour phone being stuck on EDGE.
3rd, as someone mentioned on the previous page, restoring a working nandroid will NOT reinject your IMEI if it shows up as 0. No amount of flashing anything will get it to come back. Not even stock. It needs to be reinjected manually.
flexfulton said:
Pretty sure you can turn off MD5 checks in TWRP. Probably in CWM too. Sorry if this has been mentioned. Didn't have time to read the whole thread. Just skimmed through.
2nd, there is a major difference between an IMEI that reads 0 and an IMEI that shows unknown. If it shows an unknown simply reflash your ROM and modem and you will be good to go. Sometimes a reboot is all you need. If your IMEI is showing a 0 on the other hand its gone and will require that it be injected back in which is a messy situation that usually results in tour phone being stuck on EDGE.
3rd, as someone mentioned on the previous page, restoring a working nandroid will NOT reinject your IMEI if it shows up as 0. No amount of flashing anything will get it to come back. Not even stock. It needs to be reinjected manually.
Click to expand...
Click to collapse
do you know of a good stable kit kat like ROM I could use for the s3? And any speculation as to why the ROMs werent taking for me?
Hello everyone. I'm quite new to this whole fiddling with my S3 thing. I mean, I successfully flashed a previous version of Danvdh's Dandroid ROM a few months ago but was not pleased when it would not pick up ANY GPS satellites even after 20 minutes of waiting to get a fix. Of course I tried everything from tightening screws (none of my screws were loose) to that aGPS patch (for which it gave me the wrong location even after trying what the notes suggest).
Having said that, yesterday, I tried flashing other ROMs (like Beanstalk) in hopes of getting better GPS. Now Beanstalk worked fine and gave me GPS, but with that I then ran into problems mounting and formatting a new SD card. So then I flashed the newest version of Dandroid and successfully mounted the SD card, but it still gave me GPS problems, at which point I was kind of disheartened and decided to give saranhai's StockMOD ROM a try.
I ran into all kinds of problems.
1. I'm sure this isn't the dev's fault, but my CWM version 6.0.3.7 (is that old?) won't recognize any kind of change in my internal SD card since late yesterday. My desktop and ES file explorer both register the same files and folders, but CWM still sees old files like the zip files for Beanstalk and Dandroid which don't appear on my computer??? And it won't see any new files??? What did I do wrong? Therefore, I flashed things from my external SD card from there. (Was that wrong to do?) Also, every time I try to reboot through CWM, it says root access may have been lost and asks if I want to try and fix it. I say no because my SuperSU still works?
2. After FIRST flashing Dandroid 5.1 I noticed Wi-Fi wasn't working. A post from the Dandroid thread said to flash a kernel "or update to the newest bootloaders." I flashed the kernel he provided and found out too late that it was for T999L or something and my phone is T999. I'm kinda surprised my phone didn't brick then. Anyway, I got Wi-Fi, but whenever I tried to turn on mobile data, it said to insert a SIM card?? I'm sure it's because I flashed that wrong kernel. When I go into Settings > About Device it says the Baseband version is unknown and the Kernel version is as follows:
3.0.31-1804024
[email protected]
Sat Oct 5 00:13:48 KST 2013
and the build number: JSS15J.T999UVUEMJC
EDIT: I FOUND OUT MY PHONE WAS ACTUALLY T999L NOT T999. Currently trying to fix things. I'll get back to the thread.
3. So hoping saranhai's StockMOD ROM would give me the fresh start I so desperately needed, I followed his instructions step by step from flashing the right modem FIRST then flashing the ROM, but alas, the same "Insert SIM card...." error still plagued me. You would not believe how sad I got. (I'm still pretty sad.) At that point I tried REALLY hard to familiarize myself with what I was doing, reading the thread carefully, looking through that glossary thread to help me keep up with the techie terms, and searching for instructions on how to get it fixed, but I couldn't find anything and I was stuck.
4. This morning I flashed the Insecure kernel the StockMOD ROM thread provided and I still get the error.
5. I tried to restore from a backup I made last week on CWM, but it kept saying "checking MD5 files" and them giving me an error about not being able to restore.
As you all can see, I probably made a HUGE mess out of my phone and it might come as a huge surprise that I haven't bricked it completely. I'm extremely desperate at this point and I've admitted that I don't know what I'm doing. :crying:
It's come to the point where I just want a stable handset that will give me the services I want (GPS, mobile data, Wi-Fi, etc.) and I'm beginning to think this root lyfe isn't for me. I searched for guides on how to return to stock and unroot, but all the guides are different and I'm so confused and overwhelmed as to what I should do at this point. Please, please, please! A little guidance would be GREATLY appreciated!
Thanks for your time!
First off don't get disheartened. You did demonstrate a genuine attempt to help yourself and try your best on your own. Yes mistakes happen. We all do that. For what its worth, no one is born knowledgeable in these areas. We all learn.
Ok so what do we do next ? Lets start with a clean slate and put that all behind you. Yes your current recovery CWM is indeed dated and that's the reason for some of the issues you have.
Follow these steps.
1. Take UVDMD5 version of Root66 from here. Use ODIN to flash it to your phone. If you need a guide on how to use ODIN, read this thread carefully.
2. Once that Stock firmware has been updated and your phone boots fine, check if you have GPS and all the other features working to your satisfaction. Given your problems with GPS, I strongly recommend taking a GPS fix at this time.
3. Once that's working fine, flash the latest CWM Touch Recovery (version 6.0.4.5 for D2TMO). You can use Rom Manager from Play store.
4. Take a Nandroid before proceeding. When you do, uncheck the generate MD5 and enable Compression.
5. Now its your choice. You could flash Saranhai's Stock Mod or Danvdh's Dandroid. Both are good Roms and its your call. Check the GPS working after you flash Rom of your choice.
If you do choose to go after Saranhai's Rom and get into the Wi-Fi Problems, post here before you try any solutions. With Danvdh's Rom, there are certain steps to enable Root. You can't just flash SuperSU and hope to gain Root.
Perseus71 said:
First off don't get disheartened. You did demonstrate a genuine attempt to help yourself and try your best on your own. Yes mistakes happen. We all do that. For what its worth, no one is born knowledgeable in these areas. We all learn.
Ok so what do we do next ? Lets start with a clean slate and put that all behind you. Yes your current recovery CWM is indeed dated and that's the reason for some of the issues you have.
Follow these steps.
1. Take UVDMD5 version of Root66 from here. Use ODIN to flash it to your phone. If you need a guide on how to use ODIN, read this thread carefully.
2. Once that Stock firmware has been updated and your phone boots fine, check if you have GPS and all the other features working to your satisfaction. Given your problems with GPS, I strongly recommend taking a GPS fix at this time.
3. Once that's working fine, flash the latest CWM Touch Recovery (version 6.0.4.5 for D2TMO). You can use Rom Manager from Play store.
4. Take a Nandroid before proceeding. When you do, uncheck the generate MD5 and enable Compression.
5. Now its your choice. You could flash Saranhai's Stock Mod or Danvdh's Dandroid. Both are good Roms and its your call. Check the GPS working after you flash Rom of your choice.
If you do choose to go after Saranhai's Rom and get into the Wi-Fi Problems, post here before you try any solutions. With Danvdh's Rom, there are certain steps to enable Root. You can't just flash SuperSU and hope to gain Root.
Click to expand...
Click to collapse
Thanks so much for your detailed reply!
After a little bit of browsing the forum, I found that my IMEI seems to be missing and simply flashing the correct modems/kernels/whatever you call them does not fix it. I will go through your instructions and then report the results.
I read on here that sometimes it just happens randomly after flashing 4.3 ROMs? Well I certainly hope I get back my IMEI and hope it's not blacklisted :/ Apparently I can't access signal or data without it.
Thank you again!
EDIT: Does an "Unknown" IMEI mean I've totally lost it?
EDIT 2: Okay now I know God hates me. I downloaded the Root66 file and Odin will NOT let me flash it onto my phone. Keeps giving me aboot (???) errors no matter what port I use! I know I took a risk tinkering with my phone but I don't think I deserve this!
Honestly now I don't want anything to do with rooting and custom ROMs anymore. I think I'm too stupid for this. I think I just want it back to the way it was when I bought it. Could you please help me to do that?
I'm done with this root stuff, I can't do it anymore.
Sorry, I honestly don't mean to come off as whiny or ungrateful, I've just spent two days trying to figure this stuff out and it's getting me VERY tired and VERY irritated.
Oops I think I forgot to mention that you will have to put the phone in Download mode before you plug it in for ODIN. In order to get into Download mode you turn off the phone and press Volume Down AND HOME AND POWER simultaneously. If you are doing it for the first time, it may seem hard. Be patient.
Yes I suspected you to be "Missing IMEI". That's why suggested going to Stock. Your Call & Data problems come from there.
My steps do take you back to Stock.
I really apologize if this in the wrong section, or forum, but I am very worried. Earlier I was messing around and I tried flashing the Xposed framework for lollipop. I have TWRP and I made a nandroid backup, I flashed it, all was well, and I rebooted. Well It was hanging for a while, too long, on the cyanogenmod booting screen. It was active, it wasnt frozen, the circle kept coming out from the logo.
I was like "damn, it must not have worked." So I powered off, hopped into recovery, and flashed the nandroid backup I had made.
Well now I have the same problem, It gets to the logo, and continuously flashes the circle, just nothing ever happens. Ive had it trying to boot for probably 10 mins now while I am typing this. I can get to recovery no problem, and have nandroid backups made, so I mean there has to be a way to fix it.
Can anyone help? Also, I'm working with a mac computer but I can pull up parallels desktop if need be.
Thanks in advance.
ALSO,
Where can I download a stock rom for 4.4.2 for The Galaxy Tab 8.4 T320
The only link I found is on some weird 3rd party website and is gonna take 9 hours to download. It is a .zip file and I need it to be able to work with odin, so hopefully there is a .tar in the zip correct?
All this crap because of stupid Xposed. omg.
Sorry guys, im freaking out.
Also, I think I have an idea why it wont boot..
I cannot clear the Cache, or the dalvik cache. It says "E/ Failed to mount : ' Cache" and same for dalvik cache.
And When I try to "repair filesystem" it also cannot mount cache and says the cache size it 0, and free space is 0. Someone please help. I don't want to cry myself to sleep tonight.
Also, I am downloading a stock rom right now, but it is one from Canada, I couldnt find one from the USA. But it was the one with the most downloads, so it doesnt matter where it's from as long as it is for my model, SM-T320, correct?
NOBODY, has any suggestions? God I'm gonna end up trying this on my own and ending up with a hard brick. Please, out of any of the 30 people who have viewed this, anybody?! :/
-Disregard this post-
I did it, ****ers!
Thanks for all the help!
As in, I flashed the stock rom with odin, and It was sucessfull.
Then I flashed TWRP and restored my nandroid. All was well.
A little late since you fixed it, but for future reference incase someone else has the problem.
XAR firmware is for the USA wifi models,
you could also flash with Samsung kies back to stock (downloads off samsung servers), though odin works too.
you could of disabled xposed with this command line if you had a custom recovery like twrp,
TWRP - Advanced - Terminal command
touch /data/data/de.robv.android.xposed.installer/conf/disabled
There is also a key combination that can disable it too not sure if it works with the lolipop beta though
http://forum.xda-developers.com/showpost.php?p=51306764&postcount=9883
Quick explanation of the safemode: It was developed by @Tungstwenty and makes it possible to disable Xposed by repeatedly pressing one of the hardware buttons during early startup. The phone will vibrate twice when the first key press has been detected. Then you have five seconds to press the same button four more times. Each key press will be confirmed with a short vibration; the final one with a long vibration. It creates /data/data/de.robv.android.xposed.installer/conf/disabled, which prevents most of Xposed's actions (e.g. no hooks are made and no modules are loaded). There's no 100% guarantee that this will get you out of a bootloop, but in most cases it should.
Click to expand...
Click to collapse
otyg said:
A little late since you fixed it, but for future reference incase someone else has the problem.
XAR firmware is for the USA wifi models,
you could also flash with Samsung kies back to stock (downloads off samsung servers), though odin works too.
you could of disabled xposed with this command line if you had a custom recovery like twrp,
TWRP - Advanced - Terminal command
touch /data/data/de.robv.android.xposed.installer/conf/disabled
There is also a key combination that can disable it too not sure if it works with the lolipop beta though
http://forum.xda-developers.com/showpost.php?p=51306764&postcount=9883
Click to expand...
Click to collapse
Thanks man, but I think my whole problem was something was corrupted with the Cache, it said I had 0 cache memory, with 0 free,
And I couldnt clear the cache, or dalvik cache for the life of me. Or even mount it for that matter.
I'm really thankful for all the posts I found on this website though, that's where I got the idea to flash it with Odin.
I've had a horrible run of luck these past couple weeks.. Deep 2nd degree burns, two broken s6 edges from sliding off surface, and a drop all at short Heights, even with case on.. So now that I was laid up in bed recovering from work accident I decided to get my tmobile p607t I just picked up and my edge all sorted out.. This is what I did:
Downgraded from 4.4.4 to 4.4.2
Towelroot and supersu
Installed titanium backup
Decided to install custom rom and make nandroid backup
Installed flashify
Erroneously installed twrp for nexus 6 (it's a real ****ty mistake I wasn't paying enough attention, probably pain killers had something to do with it and didn't realize that for all the mentions of the note in the article that they were actually linking to nexus 6 twrp)
Flashed twrp with flashify, reboot, and would only boot into download mode
Booted into odin tried flashing the same stock 4.4.2 knowing it probably wouldn't fix problem, errored out, unsuccessful
Read something about flashing twrp with odin so tried that, it didn't work, heard cwm may work with odin, Unplugged tablet from pc, power cycled, started up with black screen.
Found out it was on by plugging back into pc and odin showed "Added"
Power cycle odin shows removed and added again.
Installed adb/fastboot and drivers via installer (win7 x64)
Just so see what was going on with tab figured I would try to flash stock again to see what error was, so I would be able to mention it in this post, says no pit partition and screen is still black..
This is the point where I decided to post, during all that I did read a lot and did try searching around for something model specific, but am really concerned about doing anything else without advice.. Not really sure if it's even fixable, but hoping that because odin still sees it, maybe it's not a lost cause.. Even if it is just pointing me in the right direction it'd be helpful. I'd be willing to donate to xda's server costs if it takes really in depth help, I've benefited a lot from the site over many years and never really had to post before because I've never had any real issues, usually much more thorough with reading things. Thanks in advance.
I have family coming over so will more than likely be back to working on it tonight..
Edit:
Jesus in doing a horrible job at life.. Posted in wrong sub.. Should be in note 10.1 2014 forum, please move to correct forum.. Sorry
Edited to add:
It's fixed, I located pit partition file, loaded that and stock rom in odin, attempted to flash but it failed, power cycled and download mode appeared on tablet, without error and odin automatically began flashing, everything is back to normal..
defcomexperiment said:
I've had a horrible run of luck these past couple weeks.. Deep 2nd degree burns, two broken s6 edges from sliding off surface, and a drop all at short Heights, even with case on.. So now that I was laid up in bed recovering from work accident I decided to get my tmobile p607t I just picked up and my edge all sorted out.. This is what I did:
Downgraded from 4.4.4 to 4.4.2
Towelroot and supersu
Installed titanium backup
Decided to install custom rom and make nandroid backup
Installed flashify
Erroneously installed twrp for nexus 6 (it's a real ****ty mistake I wasn't paying enough attention, probably pain killers had something to do with it and didn't realize that for all the mentions of the note in the article that they were actually linking to nexus 6 twrp)
Flashed twrp with flashify, reboot, and would only boot into download mode
Booted into odin tried flashing the same stock 4.4.2 knowing it probably wouldn't fix problem, errored out, unsuccessful
Read something about flashing twrp with odin so tried that, it didn't work, heard cwm may work with odin, Unplugged tablet from pc, power cycled, started up with black screen.
Found out it was on by plugging back into pc and odin showed "Added"
Power cycle odin shows removed and added again.
Installed adb/fastboot and drivers via installer (win7 x64)
Just so see what was going on with tab figured I would try to flash stock again to see what error was, so I would be able to mention it in this post, says no pit partition and screen is still black..
This is the point where I decided to post, during all that I did read a lot and did try searching around for something model specific, but am really concerned about doing anything else without advice.. Not really sure if it's even fixable, but hoping that because odin still sees it, maybe it's not a lost cause.. Even if it is just pointing me in the right direction it'd be helpful. I'd be willing to donate to xda's server costs if it takes really in depth help, I've benefited a lot from the site over many years and never really had to post before because I've never had any real issues, usually much more thorough with reading things. Thanks in advance.
I have family coming over so will more than likely be back to working on it tonight..
Edit:
Jesus in doing a horrible job at life.. Posted in wrong sub.. Should be in note 10.1 2014 forum, please move to correct forum.. Sorry
Edited to add:
It's fixed, I located pit partition file, loaded that and stock rom in odin, attempted to flash but it failed, power cycled and download mode appeared on tablet, without error and odin automatically began flashing, everything is back to normal..
Click to expand...
Click to collapse
Really unlucky but in my country we use to say good end everything good. I hope to have better days from now on.
Sent from my GT-N7100
Thank you, yes things are starting to look much better. Burn is healed, my devices are working as they should..
Like many other sprint users, I experienced serious problems with 5.1.1. This resulted in battery pulls and even a downloading boot. I starting looking into a fix. After flashing about every ROM for sprint N910P on this website, I either result in bootloop or the same problems persist. The problems are as follows:
-Can't boot, so I have to wait ~5 minutes to try again
-Boots straight to downloading, mmc read fail
-Boots fine
-Crashes to black screen around 80-90% battery (back to problem 1)
I cannot figure how to use odin anymore because it fails on nearly every rom I attempt. My reactivation lock is OFF.
I'll try to provide as much detail as I can, but I'm at my wits end with this phone.
Thanks!
If you can Odin OK1 stock tar, there is another root alternative: root stock with Chainfire Auto Root. CFAR has been updated for Android 5.1.1 Note 4
http://forum.xda-developers.com/showpost.php?p=55865442&postcount=3
Custom ROMs will take longer than 5 minutes to boot initially after flash. TWRP has been known to fail to flash or not properly flash after trying repeatedly to flash wrong tar with Odin or flash with reactivation locked. Which, if any, apply to you? I hope it's not hardware failure...
Sent from my SM-N910P using Tapatalk
Chainfire was going to be my next option. I think the first time I attempted using chainfire through odin, it ended in a bootloop. I haven't tried the update version though. I'll give that a shot.
Is there any way to fix this problem with TWRP (delete it and reflash)?
I'm starting to think its a hardware failure, which would suck because knox is tripped and warranty expired a few days ago anyway I believe.
I downloaded the updated CFAR last night to verify it was updated. It's bundled with Odin 3.10.6 Use the defaults with that for stock OK1 tar.
You should know that CFAR is primarily for rooted stock.
If you want a custom ROM, you may have to use Philz CWM touch recovery for Note 4. TWRP just gets inoperative for some time for some users when tars fail in repeated attempts. Philz' seems to flash where TWRP doesn't if that's the case.
http://downloadandroidrom.com/file/GalaxyNote4/CWM/philz_touch_6.59.0-trlte.tar
Sent from my SM-N910P using Tapatalk
Sorry to be the bearer of bad news, but this is most likely a hardware problem. I've had two Note 4's do exactly this. Flashed the stock rom on both with Odin, problems still persisted. It would just get random restarts and sometimes boot into "panic mode", whatever that is. The quality control on these phones is terrible. I baby them and never rooted any of them, yet two of them messed up like that, and all 3 of course have GPS issues. If it worked like it's supposed to it would be amazing, my friend has had one since my first Note with 0 issues, super jealous.
I hope its ok for me to post this here i couldnt find any threads on this issue and i didnt want to make new one just for this one problem so i figure i post it here since the post doesnt really point out to nothing specific and its on note 4 thread so i know ill get faster response than if i posted it in help thread ,but if i'm in wrong please feel free to delete this post at once . With that out of the way heres my issue and i hope theres an easy fix for it i was on latest pl1 build of 6.0.1 stock rooted i got tired of playing pokemon so i decided i want my themed look back so i restored my backup of 5.1.1 cog5 build ,everything works fine but my wifi ,its grayed out and when i try to turn it on it stays in "turning on " possition but it never does come on it eventualy goes back to " to see the list of networks turn on the wifi" .Now my question is is there any way to fix this wifi without flashing srock 5.1.1 i know there used to be fix for it back when i was on note 3 but this was yeaaaaars ago and i dont have that file any more thanks a million.
bigbabo said:
I hope its ok for me to post this here i couldnt find any threads on this issue and i didnt want to make new one just for this one problem so i figure i post it here since the post doesnt really point out to nothing specific and its on note 4 thread so i know ill get faster response than if i posted it in help thread ,but if i'm in wrong please feel free to delete this post at once . With that out of the way heres my issue and i hope theres an easy fix for it i was on latest pl1 build of 6.0.1 stock rooted i got tired of playing pokemon so i decided i want my themed look back so i restored my backup of 5.1.1 cog5 build ,everything works fine but my wifi ,its grayed out and when i try to turn it on it stays in "turning on " possition but it never does come on it eventualy goes back to " to see the list of networks turn on the wifi" .Now my question is is there any way to fix this wifi without flashing srock 5.1.1 i know there used to be fix for it back when i was on note 3 but this was yeaaaaars ago and i dont have that file any more thanks a million.
Click to expand...
Click to collapse
To fix the WiFi and camera focus, get the bootloader for OG5 from OP in this thread and flash it in Odin.
https://forum.xda-developers.com/showthread.php?p=66352412
The ones labeled firmware are bootloaders. You don't have to flash the whole OG5 stock tar but you still could. Just make sure the flash restores that bootloader and you should be set.
Likewise, you could still restore a MM backup and restore its bootloader.
I think you should backup your keepsakes in internal memory and wipe internal memory before restoring a backup that crosses Android versions. With backups on extSdCard, you could wipe everything but that but I'd think you could factory reset, wipe internal memory plus the Android folder on extSdCard and have a good transition with the bootloader flash. Otherwise, a factory reset would be the minimum step but may leave some residual information you may not need cluttering your memory along with what you want to keep. Seems I recall some having issues coming back to lollipop from MM without wiping internal memory?
Just curious, do you recall what you wiped going back to lollipop?
Sent from my SM-N920P using Tapatalk
Nothing i just go back n forth between lp and mm depending on lvl of interest in pokemon lol i have backups of 6.0.1 and 5.1.1 i just restore backups without wiping it restores fine aside from wifi not turning on i have no other issues
Edit: sorry meant to quote the post above me
bigbabo said:
Nothing i just go back n forth between lp and mm depending on lvl of interest in pokemon lol i have backups of 6.0.1 and 5.1.1 i just restore backups without wiping it restores fine aside from wifi not turning on i have no other issues
Edit: sorry meant to quote the post above me
Click to expand...
Click to collapse
Gotcha. Just an old question in the back of my mind from early days of MM. I researched the TWRP thread, the developers recommended a factory reset.
If you've ever noticed internal memory available seemingly smaller than usual, it could be the extraneous folders.
Thanks.
Sent from my SM-N920P using Tapatalk