Related
I am new to android phones. And i have no experience about overclock.
Will my cpu easily break down due to keep overclocking?..
Honestly, i seldom change my cell phone model, i want my defy can stay a life at least 1.5yr.
i think overclocking can't really damage your phone, voltage can. so i suggest you keep the voltage around [email protected] (default is [email protected], so this should be fine), and if the phone doesn't hang or reboot, you're good to go but you could try lowering vsels, you know, the lower the voltage, the lower the power consumption, the heat and the chance to fry your cpu but i'm not sure!
Yep, 1 GHz is safe, I'm using [email protected] as well, and the CPU is capable to run easily at [email protected] continuously. The leaked Gingerbread ROM from Motorola uses 1GHz as well, so don't worry, you just have to find the safe vsel settings.
thanks for replying, i m currently using 1GHz @ 58 .. Everything is alright
Should I make the voltage as low as possible?
yeah, just to lower the power consumption and temperature, but it isn't necessary.
Can you share your voltage setting please..?
I do the stability test and it gets successful run for 5min then this means the setting is okay?
i don't overclock, just undervolt, here are my settings (with setvsel):
800MHz - 45vsel
600MHz - 30vsel
300MHz - 18vsel
up_threshold: 90%
actually if you wanna make absolutely sure your device is stable, you should run it like for an hour. but if it runs for 5 minutes without error that's quite okay, you shouldn't have problems with those settings
Thanks so much, i m trying to lower my voltage setting.
Besides, i want to ask about the battery temperature, what is the maximum temperature before getting damage to the cell? I usually goes up to 37~39 degree celsius.. is it normal?
mine is usually around 29-32 °C, but i have it undervolted, so idk. but 37-39 seems a bit high, that means the cpu temp is way over 40 degrees, you should check it out!
EDIT: tried stress testing for 20 minutes with [email protected], it went up to 35°C, so you should definitely find out what's wrong with your device!
I actually underclocked to 600MHz, since I couldn't see a big difference even at 1200MHz in normal usage. A Pentium3 at 4Ghz will still not perform as well as a slower clocked new CPU for example, CPU design is more important - what instructions it supports.
Battery life is more imprtant to me and heat is very bad for Li-ion batteries too.
Also I found changing the CPU governor to "interactive" made a difference in GUI responsiveness and I have had less stuttering.
nisamtetreb said:
I actually underclocked to 600MHz, since I couldn't see a big difference even at 1200MHz in normal usage. A Pentium3 at 4Ghz will still not perform as well as a slower clocked new CPU for example, CPU design is more important - what instructions it supports.
Battery life is more imprtant to me and heat is very bad for Li-ion batteries too.
Also I found changing the CPU governor to "interactive" made a difference in GUI responsiveness and I have had less stuttering.
Click to expand...
Click to collapse
so, what's your standby lifetime after underclocked cpu?
I can see the performance improved when i was watching flash video on browser. But honestly, i dont think there are anymore huge difference after overclocking..
But as the battery life still remains quite well, i will still keep overclocking to 1GHz.. Isn't it a good idea?
nisamtetreb said:
I actually underclocked to 600MHz, since I couldn't see a big difference even at 1200MHz in normal usage. A Pentium3 at 4Ghz will still not perform as well as a slower clocked new CPU for example, CPU design is more important - what instructions it supports.
Battery life is more imprtant to me and heat is very bad for Li-ion batteries too.
Also I found changing the CPU governor to "interactive" made a difference in GUI responsiveness and I have had less stuttering.
Click to expand...
Click to collapse
lol... What happend to HD and THD games... Did u try playing them at 600mhz??
Overclocking to 1 GHz with the right voltage values seems to be absolutely no problem for Defy.
BTW, does anyone know whether it's possible to set scaling governor to "Interactive" mode under Froyo? Gingerbread kernel let me set it, but I haven't found the way under Froyo.
Battery life was a little bit better, the display and 3G always draw a lot of power.
Standby time got better, but I don't use very low vsel any more due to errors in YouTube and dropped connection of radio streams.
Before I used 300-600-800 at 20-30-48, this was very stable in stability test, but for example Youtube would start showing "error playing video". After I increased vsel, it went away.
I mostly did it to lower temperature, optimal temperature for li-ion is around 25°C according to Wikipedia I think.
I don't play 3d games, they would benefit the most from overclock I believe.
Angry birds RIO for example would stutter for a second or two after a level loaded, but it would become as smooth as at higher clocks, when I wait for a second.
I hope flash gets better, when hardware acceleration gets enabled in Quarx's CM7.
I was running [email protected] for a month straight. No issues at all. The highest my temp reached was 112F after playing games for about an hour straight. I now just run it at [email protected], and it's plenty fast for me. I did some "testing" with all the options in SetVsel. It's not science sound, but if you use the Gingerbread Icon in the notification bar, and are running at stock (800 speed) you will notice when the CPU maxes out it doesn't even reach full capacity. I found Words with Friends to really use the CPU, and at 800 it pings the meter in the orange (The notification icon shows green, orange, and red for "zones"). If I overclock it at 1000 or above then the meter goes into the red. I don't know the exact number it switches from orange to red, but being at stock 800 is well below what the chip can really do since it doesn't even max out the meter. I hope I didn't confuse anyone. It makes sense to me.
weird...my cpu at any game reach the 800mhz
yet even in normal situations like browsing through the files on the phone it reaches 800mhz
and also despite the values i use in setvsel are not high(which is:
24 @ 300
34 @ 600
48 @ 800
)
the phone still reaches maximum 38C when i play games and if i set the value in the third vsel the games starts to hang!!
seems like i am the only one who have these problems..but why
anyone have any idea
im running stock arabic froyo btw
if someone can confirm to me that i can keep Arabic language if i installed another rom using custom restore in nandroid then i would be using prays or official 2.3 but no one answered me about that
anyway the important thing is anyone knows why my cpu temp is always high?
Well ambient temperature is important too. If it is 30°C where you live and your phone's temperature is at 35°C I'd say you are good. If the outside temperature is 10°C and your phone is dat 40°C I'd say there is something wrong (unless you were playing games or watching a movie).
in my opinion, it is definitely safe that you overclocking to the leaked moto level.
however, the voltage is still a mystery.
there's no constant conclusion about this.
i'm using [email protected], [email protected], [email protected], and it works fine for me
I'm getting really annoyed. No problems clocking up to 1100mhz with stock voltage (58). But changing the voltage settings, even slightly, makes the phone more or less unstable.
Is there any way to turn the thermal engine off, or partly off?
Ok. I don't want to melt my 1s, but its really annoying, that it doesn't let me decide the cpu freq.
In this state my phone is a piece of ****. So whenever i want to take a photo, or gameing a little bit, its getting hot, and then it takes the cpu freq to 300Mhz and turns off the other 3 cores....
I can't use this phone in the summer, it is alwalys overheated even when i'm just do some light browsig.
I searched topics to this problem, and find some, but neither worked, as i'm using CM 12.1.
At this point i just want to take over the cpu controll. I tried serveral cpu controll app, but none of them was able to lock the cpu freq at max as the device brings it down.
I don't care how hot the device is. This cpu meant to bear 70+ celsius, so 65 celsius shouldn't harm the device.
Please give me some suggestions, i'm lost. I can't use my phone in its full performance
I'm just sad that i thought its solvable.
Hi,
I'm using a Canadian Galaxy S4, SGH-I337M.
Rooted, running on Liquidsmooth 4.4.4 ROM. Also has Ktoonsez kernel. It is currently undervolted+underclock a bit, and is stable (I could overclock it, but I don't. No need).
Been wondering for a long time about the operating CPU temperatures of the Galaxy S4... Never had the possibility to do testing with CPU temperatures before. I do have a LG P500 that I have overclocked a ton in the past, still work just fine, but the LG P500 is old and do not support viewing CPU temperature, so it's my first time experimenting with that.
How hot would be too hot for this phone? There are several opinions, but never figured out if I... "minimize" the risks of my actual temperatures, for some reason. My laptop CPU throttle at 85 celcius for instance. While it's a phone, it's completely different.
At night, while connected to charger, it would be pretty cool, at 25-30 degrees when I wake up;
I would say that most of the time, my CPU is running at 50 celsius, and rarely ever exceed 65-70 under normal use, or even gaming. Plus, the CPU is undervolted and a bit underclock, so I do feel like it run cooler than usual.
Quoting Meowmix from Rogers forums:
It varies on the usage of everyone else & how you handle the phone ( cases & such). Also if you are in extreme heat or having the device in direct sunlight.
Click to expand...
Click to collapse
So, the case does matter? I do have that Otterbox case which is pretty tight and enclose the phone pretty well, I would believe that the phone would get less.. air.. but I mean, it's just a case, didn't thought it would affect much..?
Quoting Ahmed from AndroidCentral Forums, I would say that I have a quite similar situation.
No, just when i ran AnTutu when it runs the 4 cores at the maximum frequency the temperature is between 80-91c, and at normal use while surfing the internet the temp. 45-55c and the battery reaches 38c after an hour of continuous using.
Click to expand...
Click to collapse
I CAN reach 80-90 celsius, but only if I really want it to happen. 38 celsius for the battery is also correct, I never exceeded 41 degrees yet, on any Android phone (I don't know the dangerous battery temps.. But when I reach 40 degrees I try to put it down as fast as possible). With benchmarks, usually at the max frequency, or testing my undervolt with Stability Test, I CAN reach 80-90 celsius, which look really high. Additionally, I would remind that I don't overclock, and the CPU is undervolted so seems a bit cooler.
So on AndroidCentral, this is the reply Ahmed got, from "CR6" user:
I had to use my temp converter to look up & convert them to Fahrenheit. 80-91c equates to 176-195 Fahrenheit and that's extremely dangerous. These temps will not only physically burn you, but will fry your phone if you continue using it at these temperatures. 45-55c equates to 113-131 degrees Fahrenheit, and that is normal under really heavy usage. Optimally, you'd like to keep it at 38-45c. You may have a defective device if you regularly see temps over 80c and I would advise checking on a replacement.
Click to expand...
Click to collapse
THAT dangerous? Well, I don't phisically feel the heat - I do feel it, but since I have that phone case, that doesn't hurt at all. But like I mentionned, I never reach 80 celcius or more unless doing benchmarks. Usually I never exceed 65-70. But still it left me wondering - Why does Android allow such high temperatures in first place? Isn't the system suppose to shut down at some point in case of danger, and when?
I've also experimented with thermal throttling in the Ktoonsez kernel, and the throttling values of the ROMs. Touchwiz Stock ROM with DVFS disabled, seems to throttle at 80 celsius, look decent. Liquidsmooth AOSP ROM, stock kernel, does not seem to throttle at all (Huh)! Once, and that was exceptionnal, I've reached 100 CELSIUS using Wifi, connect to a charger after like 2 hours, room temperature was very warm, was not surprised, but when I noticed I reached 100 CELSISUS, I was WOAW, I should shut down. I did reached 100 degrees again, using Stability Test at max frequency after a few minutes. Needless to say I manually stopped the test, because I had no idea how much heat the phone could handle...
So been aware of this, "Ktweaker" app, for the Ktoonsez kernel I use now, does have a thermal throttling option, but I wondering which thermal value should I enter for best "performance"? Default was 70 degrees, I set mine at 80, I've heard of people even putting 90 for the same kernel. Besides, maybe I worry about it too much, because in no way the phone should exceed 70 degrees celcius under normal use anyway, or even gaming. Only way to reach insane temperatures would be benchmarking/stress testing...
Still, first time seeing these CPU temperatures also. I've overclocked my LG P500 several times in the past, dealing sometimes with random reboot, so make stability/overheating questionnable, but the device did not supported seeing the actual CPU temp. So I don't know which temperatures would be considered normal - probably, nothing above 75-80, correct (For the Galaxy S4, actually)?
(Jason) said:
(From another thread)
I do know it can run up to about 180 before hitting critical and shutting down
Edit: its about a 75 degree ambient temp where im at.
Tapped² from my I5³5
Click to expand...
Click to collapse
At which point is the device supposed to shut down? Is that in the kernel or a hardware CPU trigger? Because heck, I've reached 100 degrees 2 times, I mean, how far/close was I from a shut down? I'm quite surprised.
I've also read of people complaining of S4 overheating, especially maybe after it was released - It's possible that it heats up more than other phones, but honnestly I have no idea.
Thanks for your answer =)
Going thru this exact same thing. Same temps. This is not normal. Mines just started happening one day. Idk how or exactly when
Kennii said:
Going thru this exact same thing. Same temps. This is not normal. Mines just started happening one day. Idk how or exactly when
Click to expand...
Click to collapse
Thank you for your answer;
Used to think some temps look normal to me - Besides, since I've undervolted last week, it's stable and run cooler, maybe better battery as well. I never can exceed 70 degrees even when gaming I supose..
I can reach 80 degrees, but only when benchmarking or stability testing, so I'm not worried, but I do wonder;
I've reached 100 degrees 2 times, once while doing a stability test at 1,89 GHz for like 5 minutes (or more), I had to manually stop. And last time was long ago, watched YouTube videos in bed, like under covers ha, maybe as well connected to charger. Not even surprised I've reach such temps after a while in such conditions, under covers, just no air (Used to do it with my LG P500 too. While I never was able to see the CPU temps on this device. Even then, LG P500 still works, but guessing build quality was much better). Needless to say I was like WOAW when I've noticed 100 degrees, and just put the phone down. Probably went from 80 to 100 quickly, didn't noticed that fast. But yeah, that 100 degrees was.. almost expected under such conditions.
I just really wonder about thermal throttling. Like I've mentionned, stock Touchwiz with DVSF disabled seems to throttle at 80, while KTweaker app for a different AOSP kernel have the default temp limit set to 70. Liquidsmooth ROM, AOSP, does not seem to have a throttling point, since I've reached 100 degrees 2 times with it (Don't intend to test 100 degrees again, huh). What would be the maximum ideal temp for throttling? Maybe I think about it too much, since under normal circumstances, I never exceed 70 degrees, besides benchmarks.
Also wondered at which temp is the phone supposed to shut down... 120 degrees?! XD Because 100 seems ridiculous to me, probably is, but yeah, my laptop throttle at 85, and it's a laptop (Intel Core i3) - Can't imagine a phone going any higher without any risk.
Thanks for the feedback
Hello, i ordered a white sexy g3 32gb despite reading all about its problems like throttling, rebooting, freezing, lag, bad battery life and overheating. I lcouldnt help but order it, iike its screen to body ratiio, and how it looks. And always wanted to try it.
Currently i have sony z1 and it does run warm, and does heat up, but nothing annoying.
Here i did few tests, using stability test.
1st starts at all core @2.2 ghz
2nd @ about 60 Celsius throttles @1.7 ghz
3rd @ 70 Celsius it throttles @ 1.2 ghz
And finally cpu z screenshot showing you normal usage temps
No lag when using stability test even @1.2ghz, multitasking in background.
How about lg g3?
And did i make good decision buying the G3
Edit: room temp~25 degree (air conditioner)
Code:
/*
* Your warranty is now void.
* I am not responsible for bricked devices thermonuclear war, or you getting fired because the alarm app failed
* Please do some research if you have any concerns about what this MOD does before flashing it
* YOU are choosing to make these modifications, don't point fingers at me if something goes wrong
*/
Ladies and gentlemen,
A small modification for you with great and HOT results.
Changes I made to the thermal configuration:
-The default Virtual-SKIN-based throttling threshold was starting at 39 Celsius, that was removed and the "first" threshold value is now 55 Celsius (at 55C it will HARD throttle, throttling is not completely eliminated here on purpose and at 55C it will behave the same as the default throttling mechanism at that temperature).
Keep in mind that SOC will throttle regardless of when it hits its own TjMax values so you don't need to worry about any "meltdown". lol
- Display won't switch to 60Hz anymore and neither will the maximal possible brightness be reduced as it is normally happening with stock throttling thresholds.
So far I'm using this on EvoX ROM but this should work basically on ANY ROM as the throttling is relying on the same file and as far as I managed to observe (amount of ROMs checked out) it's the same on those ROMs.
Pros:
- Throttling thresholds are drastically increased, meaning if you experienced any HIGH FPS drops during playing any "heavy" games, this will prevent that from happening to an extent and time.
- Any apps that rely on high processing power, will have more space and time to work without being affected by thermal throttling
Cons:
- Depending on your usage and what exactly you do on your phone, the device could get uncomfortably warm in your hands, and battery temperature will raise MORE than you got used to it since the SOC won't be throttled that fast as it does on the stock. Keep in mind that high battery temps are not healthy, and they will cause faster degradation. Degradation occurs anyways, the question is only how fast based on the temps the battery is being exposed to. Many OEMs allow such temps, so, Pixel 7 series with this mod isn't anything different compared to them.
- If you're a heavy "gamer" and play some games like Genshin, TOF, COD (at 120fps), etc... (you'll have a smoother experience (less FPS drops) based on slower/weaker throttling) but I recommend always using a Peltier cooler to keep that battery and the device as cool as possible (regardless if this phone or another).
Why did I create this mod?
I personally use an app called MotionCam Pro. It's basically a RAW video recording app that relies on HIGH processing power (it records RAW DNG frames) and it heats up the device pretty fast, well, Pixel 6/Pro hits the throttling threshold really fast and it's causing the recording to drop A LOT of frames to a point that the footage recorded is not "usable".
With this mod, I can now shoot RAW videos for longer periods with almost no dropped frames and under higher ambient temps. Yes, the phone warms up much more, but it does the JOB for me and that's all that matters to me anyway. I don't care if I'll need to replace my battery after 1 year instead of 2 years because I lost maybe 15-20% of the battery capacity (I upgrade my phones almost yearly).
Have fun frying eggs on your phone.
Installation
- Flash via Magisk
- Reboot your device
- Enjoy
Keep in mind that this is a TEST MOD because I don't own the device and can't test it myself.
Feedback is appreciated.
Reserved
JohnTheFarm3r said:
Keep in mind that this is a TEST MOD because I don't own the device and can't test it myself.
Feedback is appreciated.
Click to expand...
Click to collapse
This module increased the performance of pixel 6 pro by 25 % in the same temperature. Previously within 1/2min cpu would get 150-165k GIPS but after flashing module performance is stable around 200-220k GIPS . But the X1 cores aren't still being utilized to their fullest . It's still being limited to 1.5 Ghz even thou it can reach 2.8 Ghz . It there a way to tweak the module to completely remove this throttling at such low temperatures ? Even the awful snapdragon 888 doesn't even begin throttling before 40 °C
Mahbubur Rahman Siam said:
This module increased the performance of pixel 6 pro by 25 % in the same temperature. Previously within 1/2min cpu would get 150-165k GIPS but after flashing module performance is stable around 200-220k GIPS . But the X1 cores aren't still being utilized to their fullest . It's still being limited to 1.5 Ghz even thou it can reach 2.8 Ghz . It there a way to tweak the module to completely remove this throttling at such low temperatures ? Even the awful snapdragon 888 doesn't even begin throttling before 40 °C
Click to expand...
Click to collapse
No, because the prime core is probably hitting the TJMax, hence it's throttling down. AFAIK, TjMax on Tensor G1 is set at 90c.
The cooling design inside the Pixel devices can't handle too much heat (thermal capacity is weak) so it's normal behavior for the CPU to scale down the frequencies based on the temperature limit on the CPU.
Also, don't mix the battery temps with the CPU temps. CPU reaches temperatures up to 90c on G1.
Also, even the 888 throttles when it hits the TJMax. That's completely normal throttling behavior to protect the chip from cooking up.
JohnTheFarm3r said:
No, because the prime core is probably hitting the TJMax, hence it's throttling down. AFAIK, TjMax on Tensor G1 is set at 90c.
The cooling design inside the Pixel devices can't handle too much heat, so it's normal behavior for the CPU to scale down the frequencies based on the temperature limit on the CPU.
Click to expand...
Click to collapse
Well that's just bad design on Google's part can't do anything about that . Still this is huge improvement from the dog **** performance previously. Even throttled it's like a snap 865 . Unthrottled it would be like a snap 888
work well on my pixel 6 Pro ，March update
Mahbubur Rahman Siam said:
Well that's just bad design on Google's part can't do anything about that . Still this is huge improvement from the dog **** performance previously. Even throttled it's like a snap 865 . Unthrottled it would be like a snap 888
Click to expand...
Click to collapse
Do you have the unthrottled magisk module,I want give it a try
Juuuuune said:
work well on my pixel 6 Pro ，March update
Do you have the unthrottled magisk module,I want give it a try
Click to expand...
Click to collapse
You need a cooler for that . Also cpu will thermal throttle regardless of outside temperature as soon as it hits internal TJ max value . Your best bet is to use a aluminum foil inside your case to help with heat dissipation
So far so good. Will give feedback if there's anything weird.
All the work so far is normal, thank you very much for your work! I shared it with some of my friends (China, also using pixel6pro). Strangely, some of their mobile phones will be stuck in the start-up loop (boot Google Logo loading interface) after flashing into this mod. As far as I know, this problem has nothing to do with the system version.
JohnTheFarm3r said:
Code:
/*
* Your warranty is now void.
* I am not responsible for bricked devices thermonuclear war, or you getting fired because the alarm app failed
* Please do some research if you have any concerns about what this MOD does before flashing it
* YOU are choosing to make these modifications, don't point fingers at me if something goes wrong
*/
Ladies and gentlemen,
A small modification for you with great and HOT results.
Changes I made to the thermal configuration:
-The default Virtual-SKIN-based throttling threshold was starting at 39 Celsius, that was removed and the "first" threshold value is now 55 Celsius (at 55C it will HARD throttle, throttling is not completely eliminated here on purpose and at 55C it will behave the same as the default throttling mechanism at that temperature).
Keep in mind that SOC will throttle regardless of when it hits its own TjMax values so you don't need to worry about any "meltdown". lol
- Display won't switch to 60Hz anymore and neither will the maximal possible brightness be reduced as it is normally happening with stock throttling thresholds.
So far I'm using this on EvoX ROM but this should work basically on ANY ROM as the throttling is relying on the same file and as far as I managed to observe (amount of ROMs checked out) it's the same on those ROMs.
Pros:
- Throttling thresholds are drastically increased, meaning if you experienced any HIGH FPS drops during playing any "heavy" games, this will prevent that from happening to an extent and time.
- Any apps that rely on high processing power, will have more space and time to work without being affected by thermal throttling
Cons:
- Depending on your usage and what exactly you do on your phone, the device could get uncomfortably warm in your hands, and battery temperature will raise MORE than you got used to it since the SOC won't be throttled that fast as it does on the stock. Keep in mind that high battery temps are not healthy, and they will cause faster degradation. Degradation occurs anyways, the question is only how fast based on the temps the battery is being exposed to. Many OEMs allow such temps, so, Pixel 7 series with this mod isn't anything different compared to them.
- If you're a heavy "gamer" and play some games like Genshin, TOF, COD (at 120fps), etc... (you'll have a smoother experience (less FPS drops) based on slower/weaker throttling) but I recommend always using a Peltier cooler to keep that battery and the device as cool as possible (regardless if this phone or another).
Why did I create this mod?
I personally use an app called MotionCam Pro. It's basically a RAW video recording app that relies on HIGH processing power (it records RAW DNG frames) and it heats up the device pretty fast, well, Pixel 6/Pro hits the throttling threshold really fast and it's causing the recording to drop A LOT of frames to a point that the footage recorded is not "usable".
With this mod, I can now shoot RAW videos for longer periods with almost no dropped frames and under higher ambient temps. Yes, the phone warms up much more, but it does the JOB for me and that's all that matters to me anyway. I don't care if I'll need to replace my battery after 1 year instead of 2 years because I lost maybe 15-20% of the battery capacity (I upgrade my phones almost yearly).
Have fun frying eggs on your phone.
Installation
- Flash via Magisk
- Reboot your device
- Enjoy
Click to expand...
Click to collapse
This module has done wonders for the flagship experience of pixel 6 pro but after flashing this charging speed has gone total whacked . Normally pixel 6 pro would charge around 23W with screen turned off but after flashing this module the device charges around 9w max with screen turned off and with screen on it charges around 3w !!! Literally took 3.5 hours to charge with just music playing in background. I think it has someone to do with thermal threshold mismatch between charging and non-charging state . Changing the charging state thermal threshold to non charging thermal threshold should fix this behavior. I tried making my own module with this file but got bootloops . Can you a similar module for charging ?
Mahbubur Rahman Siam said:
This module has done wonders for the flagship experience of pixel 6 pro but after flashing this charging speed has gone total whacked . Normally pixel 6 pro would charge around 23W with screen turned off but after flashing this module the device charges around 9w max with screen turned off and with screen on it charges around 3w !!! Literally took 3.5 hours to charge with just music playing in background. I think it has someone to do with thermal threshold mismatch between charging and non-charging state . Changing the charging state thermal threshold to non charging thermal threshold should fix this behavior. I tried making my own module with this file but got bootloops . Can you a similar module for charging ?
Click to expand...
Click to collapse
What cable/charger do you use?
I use a 100w rated Basesus C to C cable, with a 120w Basesus Power Supply, and my charge time is around 40 minutes from 30-40 percent with this mod installed.
I know SOME cables/chargers can be a littttttleeee bit touchy when it comes to power mods.
What is really annoying is the premature current limit. I use Xiaomi GaN-33W charger + CtoC cable/ Up to 6A cable. When the device is low temperature and low battery, the current of the rechargeable battery can reach 4.5A and the power reaches 20W +. However, once the temperature rises slightly（about 39℃？）, or the battery reaches about 65+, everything will deteriorate, and the current will drop sharply, with less than 3A remaining, and only 2A when it reaches 80 At this time, the power is only about 10W. The worst thing is that once the battery is higher than 90, the charging current will hover at 1A or even lower. You know that my Xiaomi 11X (4500mAh / Up to 33w) which only need 47 minutes to charge from 0 to 100, a huge gap， right？Google do a bad work for their phone.
Gytole said:
What cable/charger do you use?
I use a 100w rated Basesus C to C cable, with a 120w Basesus Power Supply, and my charge time is around 40 minutes from 30-40 percent with this mod installed.
I know SOME cables/chargers can be a littttttleeee bit touchy when it comes to power mods.
Click to expand...
Click to collapse
Gytole said:
What cable/charger do you use?
I use a 100w rated Basesus C to C cable, with a 120w Basesus Power Supply, and my charge time is around 40 minutes from 30-40 percent with this mod installed.
I know SOME cables/chargers can be a littttttleeee bit touchy when it comes to power mods.
Click to expand...
Click to collapse
Stock google charger with stock cable .
I made some changes to thermal file to fix charging throttling as well . Now charging won't get throttled because of temperature. Phone charges at full speed regardless of temperature I also made TEST file to disable throttling related to TJmax . Let me know if there are any issues.
Mahbubur Rahman Siam said:
I made some changes to thermal file to fix charging throttling as well . Now charging won't get throttled because of temperature. Phone charges at full speed regardless of temperature I also made TEST file to disable throttling related to TJmax . Let me know if there are any issues.
Click to expand...
Click to collapse
So I want to keep the temperature control instead of disabling it which one should I use?
Juuuuune said:
So I want to keep the temperature control instead of disabling it which one should I use?
Click to expand...
Click to collapse
The one without the word "TEST"
TeeJae360 said:
The one without the word "TEST"
Click to expand...
Click to collapse
Thanks
Mahbubur Rahman Siam said:
You need a cooler for that . Also cpu will thermal throttle regardless of outside temperature as soon as it hits internal TJ max value . Your best bet is to use a aluminum foil inside your case to help with heat dissipation
Click to expand...
Click to collapse
would aluminium foil actually help?
Mahbubur Rahman Siam said:
I made some changes to thermal file to fix charging throttling as well . Now charging won't get throttled because of temperature. Phone charges at full speed regardless of temperature I also made TEST file to disable throttling related to TJmax . Let me know if there are any issues.
Click to expand...
Click to collapse
Would love to have one where it throttles MORE to keep device cooler for those who don't want more heat, basically the opposite of what you already have