Develop Bugs

[Q] Network unlock request unsuccessful (SGH-I747M - Running SlimKat 4.4.4)

Just purchased an unlock code from Telus but it does not work. I know some posts mentioned it only works with a stock dialer app.
Is there anything else I can try before attempting that?
If not, what stock rom can I even use? And is there a guide available?
Sorry if this has been asked before. I had trouble finding any answers.
Thank you.

Just flash your stock firmware with Odin.

The boot loader on your phone will determine which firmware to load on your phone.
If you have the 4.3 bootloader, don't flash 4.1.1 or 4.1.2.

Flashed stock rom, booted with sim inserted, and entered the unlock code when asked. It worked! Thanks for the reassurance, I was hesitant.
Here are some links I came across that might help others.
Downloaded latest ROM for my carrier: http://samsung-updates.com/device/?id=SGH-I747m
Got Odin from this post: http://forum.xda-developers.com/showthread.php?t=1722686
Followed these threads to flash with Odin:
http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
http://forum.xda-developers.com/showthread.php?t=2789917
http://forum.xda-developers.com/showthread.php?t=1722686
Read the CyanogenMod guide to install SlimKat: http://wiki.cyanogenmod.org/w/Install_CM_for_d2att
SlimKat XDA thread: http://forum.xda-developers.com/showthread.php?t=2758209
Root: http://slimroms.net/index.php/faq/slimbean/441-how-do-i-enable-root
Downloaded Texdroider DPI from the play store to change to S3 default (320)
Then I thanked everyone I could! :victory:
Notes
* I forgot to wipe my device before and it still worked.
* TWRP would not read my SD card for some reason.
* Good info threads:
http://forum.xda-developers.com/showthread.php?t=1725839
http://forum.xda-developers.com/showthread.php?t=1802160

Glad to hear you got it to work! Couple things for extra knowledge. ..
You can also get firmware from http://sammobile.com/firmwares. Their downloads are much faster than samsung-updates IME.
Easiest root method ever! - Towelroot (shouldn't trip the warranty bit either)
If I'm not mistaken, the recoveries having problems reading the sd card is due to your hardware version. I believe they found a solution in the Sprint forums, but I haven't had a chance to read up on it yet. If its something I can do I'll probably try to fix the T-Mobile and AT&T recoveries. I may be mistaken on some of that, but its how I understood it after a quick search the other day.

Need help for flashing stock rom
Hi,
Can you please clarify few things for me?
I have an ATT Galaxy S3 (SGH-i747).
I am running CM11 Android 4.4.4 Baseband I747UCDMG2.
I need to go back to stock to SIM unlock the phone.
Latest ATT stock rom is 4.1.1 with I747UCDLK3.
Will flashing to stock ATT ROM brick the phone?
What is the best way to go back to stock ROM?
Thanks,

I have an ATT Galaxy S3 (SGH-i747).
Click to expand...
Click to collapse
My phone was the same; except being the Canadian version.
I am running CM11 Android 4.4.4 Baseband I747UCDMG2.
Click to expand...
Click to collapse
I think I had CM 4.4.4 before going back to stock. It was kitkat for sure tho.
Will flashing to stock ATT ROM brick the phone?
Click to expand...
Click to collapse
It shouldn't. But of course anything can happen.
What is the best way to go back to stock ROM?
Click to expand...
Click to collapse
Using ODIN I believe. I read through all the links I posted above but I guess this one was the easiest to follow.
http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
Hope that helps, it has been a while lol. Maybe someone with more experience will chime in :good:

brando9 said:
My phone was the same; except being the Canadian version.
I think I had CM 4.4.4 before going back to stock. It was kitkat for sure tho.
It shouldn't. But of course anything can happen.
Using ODIN I believe. I read through all the links I posted above but I guess this one was the easiest to follow.
http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
Hope that helps, it has been a while lol. Maybe someone with more experience will chime in :good:
Click to expand...
Click to collapse
Thanks for quick reply.
Bootloader on mine is I747UCDMG2 which is from 4.1.2. Hence I should be ok to go to stock 4.1.1 ROM.
I am reading few other posts before making the move.

Flashing the USA version of the s3 (i747) with any i747 firmware from sammobile in Odin can brick your phone us you have a 4.3 bootloader or higher.
Since you are on 4.1.2 bootloader, flash the stock ATT 4.1.1 ROM from sammobile.com using Odin. After flashing, do a full wipe in recovery. Boot the phone and use the free method to permanently sim unlock your phone.
After unlocking your phone, you can run OTA updates to get to the latest stock ROM, bootloader, and modem.

Just confirmed bootloader and baseband are I747UCDMG2.
I will update here how everthing goes.
PS: I DON'T want to go to I747UCUEMJB bootloader after unlock. That will mean, I will not be able to downgrade in future. AFAIK, I747UCUEMJB bootloader is also locked.

yoonus said:
Just confirmed bootloader and baseband are I747UCDMG2.
I will update here how everthing goes.
PS: I DON'T want to go to I747UCUEMJB bootloader after unlock. That will mean, I will not be able to downgrade in future. AFAIK, I747UCUEMJB bootloader is also locked.
Click to expand...
Click to collapse
correct in that you will not be able to downgrade (serious risk of bricking your device).
bootloader is not locked on the S3 AFAIK. (bricked my s3 on mj2 trying to 'unlock' an already unlocked bootloader.).
"all i can really do , is stay out of my own way and let the will of heaven be done"

mrrocketdog said:
correct in that you will not be able to downgrade (serious risk of bricking your device).
bootloader is not locked on the S3 AFAIK. (bricked my s3 on mj2 trying to 'unlock' an already unlocked bootloader.).
"all i can really do , is stay out of my own way and let the will of heaven be done"
Click to expand...
Click to collapse
I agree that the bootloader is unlocked.
I think at times people are calling the newer bootloaders locked because they are unable to downgrade them. Whereas we are calling them unlocked because we can still root them and flash custom/unsigned ROMs.

ATT has been locking the bootloader on other phones such as the Note 3, HTC One XL, and the Moto G so I'm not surprised that owners think their bootloader is locked.

audit13 said:
ATT has been locking the bootloader on other phones such as the Note 3, HTC One XL, and the Moto G so I'm not surprised that owners think their bootloader is locked.
Click to expand...
Click to collapse
True. I have an ATT S5 and is really annoyed with locked bootloader.

flash to stock successful
yoonus said:
Just confirmed bootloader and baseband are I747UCDMG2.
I will update here how everthing goes.
PS: I DON'T want to go to I747UCUEMJB bootloader after unlock. That will mean, I will not be able to downgrade in future. AFAIK, I747UCUEMJB bootloader is also locked.
Click to expand...
Click to collapse
Thanks all for the assurance and support.
I was able to ODIN to stock ROM and SIM unlock the phone.
Background: My ATT S3 i747 was running CM11 Android 4.4.4. Baseband and Bootloader was I747UCDMG2.
Steps:
1. Flashed rooted stock ROM (root66_ATT_I747UCDLK3.7z) using odin from http://forum.xda-developers.com/showthread.php?t=1739426
Followed the steps in OP.
After flash ODIN showed PASS and phone rebooted. It was stuck in Samsung logo. I booted into recovery. Performed a wipe cache and factory restore.
Phone rebooted successfully after that.
2. Inserted non-ATT SIM and it asked for the unlock code. I had obtained the code from ATT before. Used the code and phone was unlocked.
The same code did not work while I was running CM11.
NOTE: When running stock ROM you can follow steps in below threads if direct unlock did not work for you.
1. http://forum.xda-developers.com/showpost.php?p=58671214&postcount=152
2. http://forum.xda-developers.com/showthread.php?p=38767845#post38767845 This works only with stock 4.1.1 image (LK3 modem).
See http://forum.xda-developers.com/showpost.php?p=59029460&postcount=323
NOTE: If you need TWRP recovery, see http://forum.xda-developers.com/showthread.php?t=1739426 and search for "Odin Flashable TWRP Recovery" in OP.
You can download ODIN flashable TWRP from there.

How to manually update I747 to 4.4.2

Hey guys,
I got a I747 I want to give to my mother as a gift.
I downgraded 4.1.2 to 4.1.1 and ran the secret menu unlock to unlock the sim card, that worked perfectly.
Now I want to update this out of 4.1.1 to 4.4.2 but I cannot find a stock firmware to run on odin anywhere.
Do I need to go to 4.3 first? Is there a stock firmware for that?
SamMobile stops at 4.1.2... OTA obviously doesn't work.
How Can I get this done..

Iz3man said:
Hey guys,
I got a I747 I want to give to my mother as a gift.
I downgraded 4.1.2 to 4.1.1 and ran the secret menu unlock to unlock the sim card, that worked perfectly.
Now I want to update this out of 4.1.1 to 4.4.2 but I cannot find a stock firmware to run on odin anywhere.
SamMobile stops at 4.1.2... OTA obviously doesn't work.
How Can I get this done..
Click to expand...
Click to collapse
You can just flash stock 4.1.2 firmware from sammobile and then run OTA updates.
I also found this on sammobile: Canada (Bell Mobile) (Black Edition), Version: Android 4.4.2, PDA: I747MVLUFNE6
CSC: I747MOYCFNE6, MODEM: I747MVLUFNE6

audit13 said:
You can just flash stock 4.1.2 firmware from sammobile and then run OTA updates.
I also found this on sammobile: Canada (Bell Mobile) (Black Edition), Version: Android 4.4.2, PDA: I747MVLUFNE6
CSC: I747MOYCFNE6, MODEM: I747MVLUFNE6
Click to expand...
Click to collapse
Will it work though.
I have it already on my pc, I updated my wife's with it.
If I update to 4.1.2 will OTA come? Even with the I747(not the I747m) on the Bell network?

Iz3man said:
Will it work though.
I have it already on my pc, I updated my wife's with it.
If I update to 4.1.2 will OTA come? Even with the I747(not the I747m) on the Bell network?
Click to expand...
Click to collapse
I have a Motorola Atrix from Bell. I flashed it with stock ATT firmware and received OTA updates from ATT over wi-fi.
Since you have the i747, start with stock pre-rooted ATT 4.1.1. This will flash the stock recovery, radio, and bootloader. Run triangle away, flash a stock unrooted ATT stock 4.1.1 ROM, and take the OTA updates.
http://forum.xda-developers.com/sho...mctr=(not provided)&__utmv=-&__utmk=135374642

audit13 said:
I have a Motorola Atrix from Bell. I flashed it with stock ATT firmware and received OTA updates from ATT over wi-fi.
Since you have the i747, start with stock pre-rooted ATT 4.1.1. This will flash the stock recovery, radio, and bootloader. Run triangle away, flash a stock unrooted ATT stock 4.1.1 ROM, and take the OTA updates.
http://forum.xda-developers.com/sho...mctr=(not provided)&__utmv=-&__utmk=135374642
Click to expand...
Click to collapse
Ok, so I guess it wasn't clear, my bad.
I have 4.1.1 stock firmware on my att 1747. It has never been rooted.
I run the Ota and I got an error, now it tells me "Your software is up to date".
Can I flash a bell i747m 4.4.2 image onto this i747 or will it brick?

Iz3man said:
Ok, so I guess it wasn't clear, my bad.
I have 4.1.1 stock firmware on my att 1747. It has never been rooted.
I run the Ota and I got an error, now it tells me "Your software is up to date".
Can I flash a bell i747m 4.4.2 image onto this i747 or will it brick?
Click to expand...
Click to collapse
You can flash i747m firmware on your phone but DO NOT flash the radios or bootloader from an i747m to an i747 and vice versa. Bricking is a really possibility if you do that.
Do you have a custom recovery? If you do, you will need to install a stock recovery.
Try resetting the phone (wiping cache, data) in recovery or through the ROM itself.

audit13 said:
You can flash i747m firmware on your phone but DO NOT flash the radios or bootloader from an i747m to an i747 and vice versa. Bricking is a really possibility if you do that.
Do you have a custom recovery? If you do, you will need to install a stock recovery.
Try resetting the phone (wiping cache, data) in recovery or through the ROM itself.
Click to expand...
Click to collapse
Alright, I have the stock recovery. How do I not flash the radio and boatloads when using the firmware from sammobile?

You cant. You cannot flash another devices firmware. Odin wont let it happen and if it did youd end up hard bricked due to mixed firmware. For example your sbl1, modemst and param partitions (plus others) would be i747 and youd be flashing sbl2, sbl3, rpm, etc from an I747M.
The only thing you could use are the system partition and kernel, nothing else. There are two ways to accomplish this, one is to build a rom from the firmware and flash that. The other is to flash with mobile odin, but that requires root and youd still have to be very careful.
Another priblem I see you encountering is you cannot run 4.4.2 without 4.3 or newer firmware. It will not boot otherwise.
You need to go to the General section and follow one of enewman17's tutorials to get to either 4.3 or 4.4.2. Personally, I dont see any other way you will be able to accomplish it.

audit13 said:
You can flash i747m firmware on your phone but DO NOT flash the radios or bootloader from an i747m to an i747 and vice versa. Bricking is a really possibility if you do that.
Do you have a custom recovery? If you do, you will need to install a stock recovery.
Try resetting the phone (wiping cache, data) in recovery or through the ROM itself.
Click to expand...
Click to collapse
Alright, based on Doc holiday, and others they say It cannot be done and from my experience I beleive them.

Thank you,
It's very difficult to do this when others are giving bad advice.
So for the record, cannot flash i747m firmware to i747.
Thanks!
The annoying part here is I can do it with my m7, I just flashed the Dev edition onto my Bell m7 with no problems.

All devices are different in many ways. What is perfectly safe to do with one brand or model can brick another.
And I wouldnt call it "bad" advice... I've seen audit13 and others helping lots of folks with very good advice. We all make mistakes and we all have more we can learn about these devices. No one knows everything about this stuff and shouldnt let that prevent them from trying to help.
Those who are trying to help are doing so with the best of intentions and tell people what they think could be the best way to solve a given problem. In cases like this one, its easy to see how anyone would think its ok to flash different firmware between similar models based on being able to do so on other devices they are familiar with. (If I had gone into those forums I wouldve been telling people the opposite and ended up being wrong there.)
All I can say is chalk it up as a new lesson on a different device, and I hope you still appreciate that someone was trying to help.
@audit13 I hope none of this discourages you from helping. Ive seen plenty of threads where your advice was sound and appreciated, and I am glad you have been around to help so many people out!
Now, back on the problem at hand... if you want to be running the latest 4.4.2 kk, you will have the option to use the OS (/system and kernel) from either the I747 or I747M firmware. But first you must fully update to a minimum of the 4.3 MJB firmware for the I747. Once you have this running for your base firmware/bootloader, you can then run the Bell or AT&T (4.3 or 4.4.2) system. (I hope this is making sense!)
So first, update the full 4.3, MJB, firmware via Odin. (Theres a thread in General with the file, ill post the link in a min).
If you want to update to 4.4.2 firmware, you can then follow enewman17's tutorial to do so via OTA.
You can then either stay with that, or use Mobile Odin to flash ONLY the system and kernel from the Bell firmware.
Let me know if any of that needs better clarification! Also let us know what your ultimate goal is. From the options you have, where do you want to end up?
---------- Post added at 10:32 AM ---------- Previous post was at 10:26 AM ----------
Ok, here are some links.
Stock MJB firmware (flash in Odin)
http://forum.xda-developers.com/showthread.php?t=2722660
enewman17's thread for updating to 4.4.2 (high success rate)
http://forum.xda-developers.com/showthread.php?t=2789917
Official, unmodified 4.4.2 OTA
http://forum.xda-developers.com/showthread.php?t=2788012
After updating with the 4.3 firmware, you can first try using the official ota to update. Then, if that fails you can go to enewman17's thread and try his method.

DocHoliday77 said:
All devices are different in many ways. What is perfectly safe to do with one brand or model can brick another.
And I wouldnt call it "bad" advice... I've seen audit13 and others helping lots of folks with very good advice. We all make mistakes and we all have more we can learn about these devices. No one knows everything about this stuff and shouldnt let that prevent them from trying to help.
Those who are trying to help are doing so with the best of intentions and tell people what they think could be the best way to solve a given problem. In cases like this one, its easy to see how anyone would think its ok to flash different firmware between similar models based on being able to do so on other devices they are familiar with. (If I had gone into those forums I wouldve been telling people the opposite and ended up being wrong there.)
All I can say is chalk it up as a new lesson on a different device, and I hope you still appreciate that someone was trying to help.
@audit13 I hope none of this discourages you from helping. Ive seen plenty of threads where your advice was sound and appreciated, and I am glad you have been around to help so many people out! ]
:thumbup::beer::sly:
err on the side of kindness
Click to expand...
Click to collapse

[Q] Need Absolutely Pure AT&T 4.4.2

I apologize in advance if this seems like a repeated question.
I have a carrier-locked Galaxy S3 from AT&T. I have a modified 4.4.2 image running. As a result it appears the network unlock code does not work. I've tried a couple of alternatives ways to unlock but none have worked. I'm on my fifth attempt... and if this doesn't work the device will be permanently locked to AT&T's network.
I'd like to flash with ODIN a completely stock 4.4.2 image. No root, no busybox, no additions, no subtractions, no changes whatsoever.
I cannot seem to find a link which has an absolutely pure AT&T image. If someone would post a link to a pristine 4.4.2 image I'd appreciate it. Thank you in advance
I'm running 4,4,2 baseband NE4, The "about" shows "Device status Custom".

From everything I have seen and read, there is no such thing as a pure stock ATT 4.3 or 4.4.2 ROM. ATT never released a full 4.3 or 4.4.2 Odin flashable ROM for the i747. 4.3 and 4.4.2 were only available as OTA updates.
Now that you are on 4.4.2 bootloader and modem, don't flash anything that attempts to downgrade the bootloader.
When you say "modified image", do you mean a custom ROM?

The closest I have seen is the stock rom posted by enewman17. However, it does still have busybox and root. He does give a download of the stock recovery. Maybe it would be possible to install, remove root and busybox, then go back to stock recovery. Keep in mind that you only have one attempt remaining and I have not tried this.
http://forum.xda-developers.com/showthread.php?t=2789917
http://forum.xda-developers.com/showthread.php?t=2788357

Audit13, I say modified because, as best I can remember, I used this process: http://forum.xda-developers.com/showthread.php?t=2789917
I typically keep records of what I do to my phones but I figured that 4.4.2 would be the last upgrade from AT&T. I never expected network unlocking to be such an ordeal.

Dawgdoc, I think I will try to reflash the OTA. I think I saw a post suggesting it can't be done twice. I'll do a little research and report what I find.
I suspect this phone will end up a gift to one of my niecies or nephews. Thanks for your advice.

You can't reflash the ota. You MUST be running stock MJB for it to work because all it does is patch the files on your device.
It'll be late before I can try, but I'll try to put up a purely stock NE4 rom. I've seen several people needing one, and am sure it will be needed again down the road...
Sent from my SAMSUNG-SGH-I747 using Tapatalk

Bootloader.

Just bought my wife a sgs3 and its on UCDLK3.
I know how very important it is to get this in the right order.
Can someone please list the order I need to follow to get this i747 to NJ1.
I can't find a list, just lots of scattered "update from this to this".
(I already carrier unlocked it!)

I'm an idiot,never mind!

In case there s another idiot around!

The simplest and safest, although not the shortest way, would be to flash back to stock 4.1.1 using firmware from sammobile.com and running OTA updates until you are running the latest.

I rooted it already. It won't ota update. Says "interrupted".

For OTA updates, you'll need to unroot and be running stock recovery.
If you have not upgraded to the mjb bootloader, you can flash the stock 4.1.1 ROM from sammobile using Odin and OTA that way.
Alternatively, you can flash the bootloader and modem in tandem.

I want to justflash the modem and bootloaders. If m gunna toss srx3 on it for her. I won't have to touch it again and she totally doesn't care about anything but stability.
I know that stuff is all here but I can't find them both. I found the modems yesterday, couldn't download them due to me being on a cell phone. What I have is the bootloaders and not the modems.
Them things ain't stickied nowhere all together?

Did you look here: http://forum.xda-developers.com/galaxy-s3-att/general/rooted-ucufnj1-stock-rom-t2985006?

Help me downgrade my galaxy s3 i747

Hi all.
Two weeks ago I got this device (sgh i747) was rooted and was stock 4.1.1. I installed cwm and made A backup of stock room. And flash AOKP custom kitkat rom. Now I want to downgrade back to stock. or if I cannot downgrade please suggest me a stable lollypop rom.
Things I have!
1:- rooted cwm installed (sgh i747)
Backup of stock rom 4.1.1
Please help .
Thanks

mango man said:
Hi all.
Two weeks ago I got this device (sgh i747) was rooted and was stock 4.1.1. I installed cwm and made A backup of stock room. And flash AOKP custom kitkat rom. Now I want to downgrade back to stock. or if I cannot downgrade please suggest me a stable lollypop rom.
Things I have!
1:- rooted cwm installed (sgh i747)
Backup of stock rom 4.1.1
Please help .
Thanks
Click to expand...
Click to collapse
If you are still on the original bootloader and modem you should be able to revert to stock 4.1.1 by simply restoring the backup from your recovery. Before you attempt to do so verify that you are indeed on the 4.1.1 bootloader. This can be done with the Phone Info *Samsung* app by VndNguyen (?sp) from the playstore or by a couple of terminal emulator commands:
Code:
getprop ro.bootloader
getprop | grep version.baseband
If you do not already have terminal emulator installed, it may have come with the ROM, you can get it from the Playstore. It may also be a part of CWM recovery, it is part of TWRP I know for sure.
If it turns out you are on a newer bootloader and modem then go with a stock ROM that matches the bootloader and modem on the phone. To run a lollypop rom you will need to be on at least the NE4 bootloader and modem.

Thanks for a very helpful reply. I m going to follow your instructions. Will soon replay. Thanks again.

dawgdoc said:
If you are still on the original bootloader and modem you should be able to revert to stock 4.1.1 by simply restoring the backup from your recovery. Before you attempt to do so verify that you are indeed on the 4.1.1 bootloader. This can be done with the Phone Info *Samsung* app by VndNguyen (?sp) from the playstore or by a couple of terminal emulator commands:
Code:
getprop ro.bootloader
getprop | grep version.baseband
If you do not already have terminal emulator installed, it may have come with the ROM, you can get it from the Playstore. It may also be a part of CWM recovery, it is part of TWRP I know for sure.
If it turns out you are on a newer bootloader and modem then go with a stock ROM that matches the bootloader and modem on the phone. To run a lollypop rom you will need to be on at least the NE4 bootloader and modem.
Click to expand...
Click to collapse
Okay got Samsung phone info app.
Boot loader version -------I747UCDLK3
Baseband version -----I747UCDLK3
And please explain LATEST NE4 BOOT LOADER.
Thanks

You are currently running the LK3 bootloader and modem. If I am not mistaken that's a pretty old one (original?). You will have to update to NE4 or newer firmware before you can flash any of the newer roms. They will not boot in the older ones.
Your firmware is actually the only one available for download so I recommend flashing it via Odin and factory resetting. Then update using the Software Update option in Settings > About Device.
You can download your LK3 firmware here: http://www.sammobile.com/firmwares/database/SGH-I747/
You may have to run Software update several times to fully update.
That is probably the safest and easiest course you can take.
After that, flash the latest custom recovery of your choice, then flash the rom you want.
Sent from my SGH-T999 using Tapatalk
---------- Post added at 12:17 PM ---------- Previous post was at 12:13 PM ----------
BTW, after flashing the LK3 firmware, you might want to consider using the free Sim unlock method. (Should be pretty easy to find).
Once you update past 4.3 you can no longer use it. It will allow the device to be used on other carriers networks, which can be beneficial if you ever want to sell it or switch carriers.
Sent from my SGH-T999 using Tapatalk

What DocHoliday77 suggests is probably the safest method to get what you want. After each update the system will force you to wait 24 hours before you can make the next update. That would be three days to get to NE4, the first 4.4.2 release by AT&T, which you need to run lollipop ROMs. If you want to update to the current release (NJ2) that would be two additional days.
You can shortcut the required waiting period by manually advancing the system date after each update.
In addition to not allowing you to use the free unlock, once you take the 4.3 bootloader it prevents you from downgrading bootloaders. Newer bootloaders do the same, downgrading will be a thing of the past. (I never took the official 4.3 bootloader until the stagefright scare came along and I went from my older custom ROM to a new release.)

dawgdoc said:
What DocHoliday77 suggests is probably the safest method to get what you want. After each update the system will force you to wait 24 hours before you can make the next update. That would be three days to get to NE4, the first 4.4.2 release by AT&T, which you need to run lollipop ROMs. If you want to update to the current release (NJ2) that would be two additional days.
You can shortcut the required waiting period by manually advancing the system date after each update.
In addition to not allowing you to use the free unlock, once you take the 4.3 bootloader it prevents you from downgrading bootloaders. Newer bootloaders do the same, downgrading will be a thing of the past. (I never took the official 4.3 bootloader until the stagefright scare came along and I went from my older custom ROM to a new release.)
Click to expand...
Click to collapse
1:- Okay I fully understood what I have to do to flash lolly pop . But confused a little bit . If I have original boodloader than it should be easier to restore my stock 4.1.1 . Backup (still not clear) .
2:- I am out of USA. The device in unlocked. I am using ZONG sim on it. So the question is can I still update the device via OTA.
Thanks

mango man said:
1:- Okay I fully understood what I have to do to flash lolly pop . But confused a little bit . If I have original boodloader than it should be easier to restore my stock 4.1.1 . Backup (still not clear) .
2:- I am out of USA. The device in unlocked. I am using ZONG sim on it. So the question is can I still update the device via OTA.
Thanks
Click to expand...
Click to collapse
When you say original bootloader I don't know which you have. My i747 came with 4.1.1 but before I could get it out of the clerk's hands they had taken the OTA to change it from DLK3/4.1.1 bootloader and stock rom to MG2/4.1.2 bootloader and stock rom. Even more confusing I have read reviews that state the SGS3 was originally released with android 4.0.4.
If your original bootloader was older than 4.3 (MJB) AND you have never upgraded to MJB or newer, then you can safely return to stock 4.1.1.
To get OTAs you need to be on the stock ROM, at least you do in the USA. I don't know if that holds true elsewhere.

I can confirm the S3 was originally shipped with 4.0.4! We were updated pretty quickly though.
As for the OTA'S, you do have to be full stock, not rooted. But you also have to be on AT&T network.
I don't know how far back the OTA'S are hosted around here, but enewman17 has several threads that provide the more recent ones. Hopefully someone will have the older ones. If I am not mistaken, you will have to update incrementally once you reach 4.3. (it's probably safe to jump straight to a 4.3 build if you can find the right firmware for it. But don't hold me to that as I am not 100% certain.
I'll look to see if I can find something you can use too.
Sent from my SGH-T999 using Tapatalk

dawgdoc said:
When you say original bootloader I don't know which you have. My i747 came with 4.1.1 but before I could get it out of the clerk's hands they had taken the OTA to change it from DLK3/4.1.1 bootloader and stock rom to MG2/4.1.2 bootloader and stock rom. Even more confusing I have read reviews that state the SGS3 was originally released with android 4.0.4.
If your original bootloader was older than 4.3 (MJB) AND you have never upgraded to MJB or newer, then you can safely return to stock 4.1.1.
To get OTAs you need to be on the stock ROM, at least you do in the USA. I don't know if that holds true elsewhere.
Click to expand...
Click to collapse
DocHoliday77 said:
I can confirm the S3 was originally shipped with 4.0.4! We were updated pretty quickly though.
As for the OTA'S, you do have to be full stock, not rooted. But you also have to be on AT&T network.
I don't know how far back the OTA'S are hosted around here, but enewman17 has several threads that provide the more recent ones. Hopefully someone will have the older ones. If I am not mistaken, you will have to update incrementally once you reach 4.3. (it's probably safe to jump straight to a 4.3 build if you can find the right firmware for it. But don't hold me to that as I am not 100% certain.
I'll look to see if I can find something you can use too.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Thanks men for quick response.
now I m fully confused. Don't know what to do. because I don't want to stuck on this battery enemy rom. (Aokp kitkat. Custom rom )
I am not clear about boootader version (PHONE INFO SAMSUNG APP SAYS ITS i747ucdlk3 ) but I know when got this thing. It was android 4.1.1 . Which I have back a backup. As per I am out of att network and I can't get OTA,s so I don't need to revert to 4.1.1 backup. I think I have to find out 4.3. For my device. So kindly please inform me if some one knows about . Iwill be very thankful to u people.
Again thanks

DocHoliday77 said:
I can confirm the S3 was originally shipped with 4.0.4! We were updated pretty quickly though.
As for the OTA'S, you do have to be full stock, not rooted. But you also have to be on AT&T network.
I don't know how far back the OTA'S are hosted around here, but enewman17 has several threads that provide the more recent ones. Hopefully someone will have the older ones. If I am not mistaken, you will have to update incrementally once you reach 4.3. (it's probably safe to jump straight to a 4.3 build if you can find the right firmware for it. But don't hold me to that as I am not 100% certain.
I'll look to see if I can find something you can use too.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
I got this while searching online. Please tell me if it is helpful for.me.
http://androidromupdate.com/att-samsung-galaxy-s3-sgh-i747-odin-stock-firmware/

Never been to that site, but it looks OK to me. Nice find in fact! All the usual firmware sites stopped getting the AT&T firmware a while back.
Anyway, just to clarify, LK3 is 4.1.1. UCDLK3 is just the build number.
If you want to get fully updated, I suggest Odin flashing the MJB (4.3) firmware. Then flash each of the OTA's until you are updated to where you want to be. (I would fully update, but that'll be up to you.) The OTA'S are intended to be flashed from stock recovery, but there is another option if you want to try it. Mobile Odin is an app by chainfire. It does require you to be rooted, but it will flash the OTA. Read his thread here on xda to learn more. It's one of my favorite apps tbh! Once you learn how to use it it makes flashing quite easy.
So my recommendation would be this:
Flash MJB with Odin.
Root using Towelroot (easiest root ever)
Install Mobile Odin and flash the OTA'S.
I hope that clears things up a bit!
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
Never been to that site, but it looks OK to me. Nice find in fact! All the usual firmware sites stopped getting the AT&T firmware a while back.
Anyway, just to clarify, LK3 is 4.1.1. UCDLK3 is just the build number.
If you want to get fully updated, I suggest Odin flashing the MJB (4.3) firmware. Then flash each of the OTA's until you are updated to where you want to be. (I would fully update, but that'll be up to you.) The OTA'S are intended to be flashed from stock recovery, but there is another option if you want to try it. Mobile Odin is an app by chainfire. It does require you to be rooted, but it will flash the OTA. Read his thread here on xda to learn more. It's one of my favorite apps tbh! Once you learn how to use it it makes flashing quite easy.
So my recommendation would be this:
Flash MJB with Odin.
Root using Towelroot (easiest root ever)
Install Mobile Odin and flash the OTA'S.
I hope that clears things up a bit!
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Yup! I think it is. Will try . Thanks

mango man said:
Yup! I think it is. Will try . Thanks
Click to expand...
Click to collapse
Update:- I am stock 4.1.1 now . I restored the device from custom AOKP kit kat rom using the stock 4.1.1 backup which I have made via CWM recovery. The device is running perfectly.
*****tried to run OTA but it says ur. Device in up to date . Means I cant get any OTA up date . So the question is can I get any custom lollypop rom using this older bootloader. ? (LK3)

DocHoliday77 said:
Never been to that site, but it looks OK to me. Nice find in fact! All the usual firmware sites stopped getting the AT&T firmware a while back.
Anyway, just to clarify, LK3 is 4.1.1. UCDLK3 is just the build number.
If you want to get fully updated, I suggest Odin flashing the MJB (4.3) firmware. Then flash each of the OTA's until you are updated to where you want to be. (I would fully update, but that'll be up to you.) The OTA'S are intended to be flashed from stock recovery, but there is another option if you want to try it. Mobile Odin is an app by chainfire. It does require you to be rooted, but it will flash the OTA. Read his thread here on xda to learn more. It's one of my favorite apps tbh! Once you learn how to use it it makes flashing quite easy.
So my recommendation would be this:
Flash MJB with Odin.
Root using Towelroot (easiest root ever)
Install Mobile Odin and flash the OTA'S.
I hope that clears things up a bit!
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Update:- I am stock 4.1.1 now . I restored the device from custom AOKP kit kat rom using the stock 4.1.1 backup which I have made via CWM recovery. The device is running perfectly.
*****tried to run OTA but it says ur. Device in up to date . Means I cant get any OTA up date . So the question is can I get any custom lollypop rom using this older bootloader. ? (LK3)

mango man said:
Update:- I am stock 4.1.1 now . I restored the device from custom AOKP kit kat rom using the stock 4.1.1 backup which I have made via CWM recovery. The device is running perfectly.
*****tried to run OTA but it says ur. Device in up to date . Means I cant get any OTA up date . So the question is can I get any custom lollypop rom using this older bootloader. ? (LK3)
Click to expand...
Click to collapse
To be able to run a lollipop rom you will need to update bootloader and modem. Update them together, this is important once you reach the 4.4.2 level of bootloader and modem that you will need to run lollipop roms. Once you reach 4.4.2 you will brick your phone if the bootloader and modem versions are not the same.
Before starting to flash any of the files you need to get you up and running on lollipop, I strongly suggest you download all you need from start to finish. Store the files you will need in the upgrade process either on an external sdcard or on the root of your internal sdcard. I haven't used CWM Recovery on my SGS3 since shortly after rooting it, I have been using TWRP since then, and I don't recall all of the capabilities of CWM recovery. If the CWM version you have will not let you flash from an external sdcard you will need to store the files you will use on the root of the internal card to be able to flash them. It will be easier to do this before you start, unless you are comfortable with pushing files from a computer using adb.
BEFORE DOING ANYTHING I AM SUGGESTING read enough that you thoroughly understand what I am saying. After reading, ask questions for clarification. Be sure you have no doubts.
Decide if you intend to install a rom along with the bootloader and modem at each upgrade; or if you are going to install updating only bootloader and modem until you get them to them point that you can run a lollipop ROM. Since you said you can not do OTA updates, either way will work. Whichever you decide, you can not skip directly to the bootloader and modem you need for lollipop.
If you are installing bootloader and modems without the rom:
From the stock 4.1.1 rom and bootloader you can go straight to 4.3 bootloader and modem, skipping the 4.1.2 (MG2) version. I have personally done this with no ill consequences. After 4.3, install the first bootloader and modem version for 4.4.2, that is NE4. Lollipop will run with the NE4 bootloader. As DocHoliday stated, you can go on the the current bootloader and modem. After NE4 is NJ1. After NJ1 you come to the current bootloader and modem, which is NJ2
If you plan to install the full ROM at each step.
The page you linked to should work if all of the downloads are available. Go from 4.1.1 to 4.3 to 4.4.2 (NE4). If you want the newer versions (NJ1 or NJ2) do them in sequence, do not skip any that are mentioned. Read the instructions on your linked page carefully. If you want NJ1 and then NJ2 they can be found in threads by enewman17, as can NE4 and maybe 4.3. I didn't provide the links so that you will hopefully read the pages carefully after searching and before downloading. Be sure you understand what you are downloading to flash and how it should be used.

dawgdoc said:
To be able to run a lollipop rom you will need to update bootloader and modem. Update them together, this is important once you reach the 4.4.2 level of bootloader and modem that you will need to run lollipop roms. Once you reach 4.4.2 you will brick your phone if the bootloader and modem versions are not the same.
Before starting to flash any of the files you need to get you up and running on lollipop, I strongly suggest you download all you need from start to finish. Store the files you will need in the upgrade process either on an external sdcard or on the root of your internal sdcard. I haven't used CWM Recovery on my SGS3 since shortly after rooting it, I have been using TWRP since then, and I don't recall all of the capabilities of CWM recovery. If the CWM version you have will not let you flash from an external sdcard you will need to store the files you will use on the root of the internal card to be able to flash them. It will be easier to do this before you start, unless you are comfortable with pushing files from a computer using adb.
BEFORE DOING ANYTHING I AM SUGGESTING read enough that you thoroughly understand what I am saying. After reading, ask questions for clarification. Be sure you have no doubts.
Decide if you intend to install a rom along with the bootloader and modem at each upgrade; or if you are going to install updating only bootloader and modem until you get them to them point that you can run a lollipop ROM. Since you said you can not do OTA updates, either way will work. Whichever you decide, you can not skip directly to the bootloader and modem you need for lollipop.
If you are installing bootloader and modems without the rom:
From the stock 4.1.1 rom and bootloader you can go straight to 4.3 bootloader and modem, skipping the 4.1.2 (MG2) version. I have personally done this with no ill consequences. After 4.3, install the first bootloader and modem version for 4.4.2, that is NE4. Lollipop will run with the NE4 bootloader. As DocHoliday stated, you can go on the the current bootloader and modem. After NE4 is NJ1. After NJ1 you come to the current bootloader and modem, which is NJ2
If you plan to install the full ROM at each step.
The page you linked to should work if all of the downloads are available. Go from 4.1.1 to 4.3 to 4.4.2 (NE4). If you want the newer versions (NJ1 or NJ2) do them in sequence, do not skip any that are mentioned. Read the instructions on your linked page carefully. If you want NJ1 and then NJ2 they can be found in threads by enewman17, as can NE4 and maybe 4.3. I didn't provide the links so that you will hopefully read the pages carefully after searching and before downloading. Be sure you understand what you are downloading to flash and how it should be used.
Click to expand...
Click to collapse
Thanks **** I need to be extra careful before taking any step. I am going to collect all relesed OTA,s. By now I onky need the links for ota. Thanks

Flash MJB and NE4 from the site you linked to above. Then use enewman17's thread for the NJ1 and NJ2 updates. He also has NE4, in case you want to get all the OTA'S from him. (Downloads will be a lot faster) They've all been used many times. I'll try to post a direct link in a few...
Sent from my SGH-T999 using Tapatalk
---------- Post added at 09:48 PM ---------- Previous post was at 09:39 PM ----------
NE4
http://forum.xda-developers.com/gal...are-update-t2808654/post53984772#post53984772
NJ1
http://forum.xda-developers.com/showthread.php?t=2941792
NJ1 and NJ2
http://forum.xda-developers.com/showthread.php?t=2985006
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
Flash MJB and NE4 from the site you linked to above. Then use enewman17's thread for the NJ1 and NJ2 updates. He also has NE4, in case you want to get all the OTA'S from him. (Downloads will be a lot faster) They've all been used many times. I'll try to post a direct link in a few...
Sent from my SGH-T999 using Tapatalk
---------- Post added at 09:48 PM ---------- Previous post was at 09:39 PM ----------
NE4
http://forum.xda-developers.com/gal...are-update-t2808654/post53984772#post53984772
NJ1
http://forum.xda-developers.com/showthread.php?t=2941792
NJ1 and NJ2
http://forum.xda-developers.com/showthread.php?t=2985006
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
I got this site having all ota, s . And is linked to the enewman17.
www.androidayos.com/samsung-galaxy-s3-stock-firmware-2/

Lol, I guess they thought they had to provide it somehow! It's a shame they didn't at least acknowledge enewman17 in their article there, but at least they direct linked to his thread.
Anyway, good luck! And if you have any other questions come up, let us know.
Sent from my SGH-T999 using Tapatalk