Zenfone 2 ZE551ML, rooted with 1-Click Root method, stock everything else, nothing touched, Developer Mode and USB Debugging on.
Here's what it shows when the device is plugged in. I have Intel Android USB Drivers installed. I have tried uninstalling the drivers through Device Manager, but the same driver keeps getting reinstalled.
MTP Mode is selected under USB Settings/Storage whatever it's called, so it should show up in My Computer but it doesn't.
Thanks!
EDIT: I think I solved it, just have to disable USB Development, unplug then replug with MTP or PTP enabled.
When I connect my phone to my computer via a known working and rapid charging capable, A>C cable the phone starts out as charging rapidly when plugged into a known working USB 3.0 port, or charging normally on a 2.2 port, but as soon as Windows recognizes the device, it stops charging completely.
The phone can be used as an MTP or PTP device, but doesn't charge on any of the modes. USB Debugging is enabled and I have the Android SDK installed on Windows, it is rooted, but is otherwise stock, with the latest security update.
Windows shows no errors in the eventlogs and the phone shows up as a mobile device in Windows device manager.
Does anyone have any idea where I can dig for more information about what's happening? Or, even better, some idea how to fix it?
Thanks in advance.
It's very possible that you do not have the Drivers installed for the device. Just because you have the SDK installed doesn't mean that you've installed the drivers. Try opening up the SDK and installing Google USB Driver. I also have provided a link below of a location where you can download the driver directly.
Google USB Driver
Good Luck!
Finally caught the driver bug! W10 x64. Take one PC that would concurrently connect N10(Omnirom 6), N9 (rooted) and stock N5 and connect a Pixel C. Connects as a Pixel C in Device Manager under "Portable Devices" - enable USB debugging and W10 says "The last USB device you connected to this computer malfunctioned and Windows doesn't recognise it". Could write a book on the steps taken. Tried to add "Android Composite ADB Interface" via install legacy hardware and pointing to Googles USB drivers (v11) I get a no x64 compatible files error. Even cleaned out W10 driver store of relevant drivers via the command prompt ( and then discovered RAPR windows front end to pnputils.exe at https://driverstoreexplorer.codeplex.com/). Nexu5 with USB debugging + MTP connects perfectly haven't tried N9 or N10.
Any bright ideas?
Don't think this has any relevance with MTP working - Using Anker USB-C to USB3 cable with rounded edges on connectors - AFAIK this version has the correct resistor
download a copy of USBDeview for x64
open it, sort the list on vendorid
uninstall every driver with vendorid of 18d1
close the program, unplug all USB devices, reboot
make sure you have the newest google drivers on the pc
plug in pixel c and let drivers install, unplug pixel c and reboot
it should now work correctly
this routine has helped me every time i had issues with the pixel c and pc recognition
most of the steps came from wugfresh's nexus root toolkit advice on how to get proper drivers
i think what happens is drivers from other devices combine to create a situation windows can not fix so need to start over.
each device plugged in will get the install routine.
Friends,
I've searched through all the threads here and on zentalk but still no good.
I have a ze551 with Superzen, phone works fine however I cannot get it to detect in Windows.
Nothing shows up in device manager, I've tried USB Debugging, MTP and PTP. I've tried 3 different computers (2 x W10 and 1 x W7) and still no good.
The only detection I manage to get is a split second of MOOREFIELD showing up when powering the phone on.
I want to flash MM but cannot adb sideload due to this USB detection issue, any ideas?
What drivers did you install? When I first connected the phone to a pc I installed the Asus drivers but nothing worked. Everything began to work after installing the Intel drivers
h0mbre_au said:
Friends,
I've searched through all the threads here and on zentalk but still no good.
I have a ze551 with Superzen, phone works fine however I cannot get it to detect in Windows.
Nothing shows up in device manager, I've tried USB Debugging, MTP and PTP. I've tried 3 different computers (2 x W10 and 1 x W7) and still no good.
The only detection I manage to get is a split second of MOOREFIELD showing up when powering the phone on.
I want to flash MM but cannot adb sideload due to this USB detection issue, any ideas?
Click to expand...
Click to collapse
try to revoke all usb debugging authorizations from developer options. then disable usb debugging and disable developer option and enable again. now enable usb debugging again. now connect to computer. now run command "adb devices" and authorize from phone.if u still have issue try changing usb cable.
I've tried the Intel drivers., the problem is the phone doesn't even get detected by windows, there's nothing showing up in device manager.
I do however get charging from USB.
I've tried USB 2.0 and 3.0 ports in 3 different computers, no detection.
It used to work fine, now it has just stopped working. Maybe the USB chip is fried or something.
h0mbre_au said:
I've tried the Intel drivers., the problem is the phone doesn't even get detected by windows, there's nothing showing up in device manager.
I do however get charging from USB.
I've tried USB 2.0 and 3.0 ports in 3 different computers, no detection.
It used to work fine, now it has just stopped working. Maybe the USB chip is fried or something.
Click to expand...
Click to collapse
may or may not. may be usb cable broke down data wire, may be connector issue. have you tried above said tips?
Hey,
I got the same problem, and the quick charging takes 7 hours or so, but I should mention previously that in my case the USB port was damaged, so I changed the whole dock. After change tried all other cables including the Asus official cable, still no joy. It looks like some updates made a big fuss in the phone or ... the motherboard is burnt? I tried on different computers with and without Android Intel USB drivers installed, but the problem is the computer cannot see the phone - I'm getting the message that the phone is not sending its designator. I have not rooted my zennfone, but when I try adb to see if the phone is mounted it's not. I was planing to root it now, but it looks like I cannot do anything. I'm affraid that there is something wrong with the hardware. I did started also SMMI test and it loops testing bluetooth, so definitely there is something wrong, but yet I have not figured out.
sukhwant717 said:
try to revoke all usb debugging authorizations from developer options. then disable usb debugging and disable developer option and enable again. now enable usb debugging again. now connect to computer. now run command "adb devices" and authorize from phone.if u still have issue try changing usb cable.
Click to expand...
Click to collapse
Hey mate, thanks for the tip.
I tried this and it did not work.
Still only getting MOOREFIELD if I hold volume down+power but no other detection what so ever
h0mbre_au said:
Hey mate, thanks for the tip.
I tried this and it did not work.
Still only getting MOOREFIELD if I hold volume down+power but no other detection what so ever
Click to expand...
Click to collapse
did you installed intel isoc driver??? if so uninstall it and install intel android usb driver
sukhwant717 said:
try to revoke all usb debugging authorizations from developer options. then disable usb debugging and disable developer option and enable again. now enable usb debugging again. now connect to computer. now run command "adb devices" and authorize from phone.if u still have issue try changing usb cable.
Click to expand...
Click to collapse
sukhwant717 said:
did you installed intel isoc driver??? if so uninstall it and install intel android usb driver
Click to expand...
Click to collapse
I have tried all drivers, the phone was working fine on my windows install and suddenly stopped.
I believe this is not a driver issue, it is hardware issue with the port or with the rom (superzen).
I will try to flash other rom as I have custom recovery and see if it fixes otherwise the port is busted.
Hello,
This is my first post.
I have a MI MAX 3 and when i plug it to my pc, it charges only
I get no popup with any other usb option like MTP
USB debuging is on and in developper options, i have chosen "file transfer" as default usb connection option (itried PTP too = same result)
Wiaomi usb drivers and ADB/fastboot are set up
When i connect my childs redmi note 7 phones, it immediatly works with the same cable
As i would like to unlock bootloader and root this phone, i need ot to be seen by the pc
Can you please help ?
Thanks