Develop Bugs

[ROM] LineageOS-11 [04 May 2019] - Amazon Fire Phone

Code:
[COLOR="grey"]/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included
* in the products you find here before flashing it!
* YOU are choosing to make these modifications.
*/[/COLOR]
Introduction
- This ROM is for the Amazon Fire Phone codenamed Kodiak.
Prerequisites for Installation
- Must be running Safestrap v4
Project Status
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
updated: 07 Jan 2016
Reporting Bugs
- Please report bugs here
- Report only one issue per bug report
- When reporting bugs please post a logcat and/or dmesg containing pertinent information regarding the issue...
Fresh Installation
- From Safestrap, go into Wipe Menu and Swipe to perform a factory reset.
- Installation in the Stock Slot is Mandatory
- Flash the ROM File
- Flash Open Gapps of your choice (any arm 4.4 version) - Except Aroma Version
- Flash the latest SuperSU package if you want root
- Reboot
- Enjoy!
Upgrading to new Version
- Flash the ROM
- Reboot
- Enjoy!
- If you previous had GAPPS it will be preserved automatically
- To preserve root between upgrades, you need to setup SuperSU to survive OTA updates.
Changing from another ROM to this one
IMPORTANT: Do NOT reboot until the end of the process
Within Safestrap
- Copy the latest Lineage ROM, Gapps, SuperSU-2.4.6 and cleansystempartition.zip to your phone
- Factory reset
- Flash cleansystempartition.zip
- Flash the rom
- Flash gapps (use latest opengapps, pico or nano)
- Flash supersu 2.4.6
- Reboot
Downloads
*** Please do NOT create any mirrors ***
- LineageOS-11 for Amazon Fire Phone
- Open Gapps
- Latest Xposed for KitKat
- Solarwarez Patched Xposed
Other Downloads
*** Please do NOT create any mirrors ***
- I modified safestrap to protect the /system partition
- So only use this if you need to do a clean install
- To use you flash this first, then immediately flash new, gapps and supersu before rebooting
- Clean System Partition Flashable zip
Source Code
- Kernel Source: Kodiak stock kernel, build number update-kindle-35.4.6.6_user_466000820
Credits
- Cyanogenmod
- LineageOS
- CAF
XDA:DevDB Information
LineageOS-11 Amazon Fire Phone, ROM for the Amazon Fire Phone
Contributors
ggow
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Stock base of 461-466 and Safestrap v4
Based On: CyanogenMod
Version Information
Status: Stable
Created 2015-07-06
Last Updated 2019-05-04

Release Notes / Changelog
04 May 2019
- Security patches up to April 2019
21 December 2018
- Security patches up to December 2018
30 November 2018
- Retire AOSP Browser due to security holes
- Please install an up to date browser of your choice
- Upgrade external/openssl: 1.0.1e -> 1.0.1j
- ANT+: Update to v4.0.0
- giflib: Update to v5.1.4
- bsdiff: Check for corrupt patch
- jhead: Update to cm-13.0 branch
- libexif: Update to android-5.1.1_r38 branch
- e2fsprogs: Update 1.41.14 -> 1.42.9
2018-09-04
- Security patches up to August 2018
- Fixed Youtube crashing (need more testing to confirm)
2018-06-01
- Security patches up to March 2018
- There are no relevant security patches after this date to now.
- Fix Bluetooth LE issue
2018-02-24
- Security patches up to Feb 2018
2017-10-08
-Ported relevant security patches up to October 2017
Older History
2017-10-03
-Ported relevant security patches up to September 2017
- All bluebourne patches are included
2017-07-20
- Security patches up to July 2017
- Fixed boot-loop on upgrade
- Fixed Xposed compatibility - Standard Xposed Framework Build should work
- Added option in Developer Options to Enable/Disable Signature spoofing
- Download link on OP now lists all Lineage-11.0 releases
- Linked latest KitKat Xposed in OP downloads section.
2017-07-05
- Security patches up to June 2017
2017-06-05
- Security patches up to May 2017
2017-04-24
- Ported security patches up to April 2017
2017-03-25
- Ported security patches up to March 2017
2017-01-05
- Switch to LineageOS repository
- Ported December 2016 Security Patches
- Fixed issues preventing latest gapps from being used
2016-11-22
- Ported November 2016 Security Patches
- Add camera HAL wrapper (Work in progress)
2016-10-16
- Ported October 2016 Security Patches
- Removed CM Updater app (not required for unofficial builds)
- Updated backlight auto adjustment
2016-10-11
- Build logcat from source - can now use logcat -C for colour output
- Clean up media codecs
- Xposed fixed: borked implementation of security update was the cause
2016-10-02
- This is a BETA release
- Fixed bluetooth tethering
- Fixed USB tethering
- Adjusted display auto backlight values
- Fixed bug in dual band WiFi detection
- Enabled WiFi background scanning
- Enabled WiFi batch scanning support
2016-09-15
- Ported September 2016 Security Patches
- bsdiff: Add overflow check when checking for a corrupt patch
2016-08-06
- Ported August 2016 Security Patches
- There will be no more updates from Cyanogenmod in this ROM.
- Going forward I will implement/backport fixes etc as necessary
2016-07-26
- Use liboemcrypto.so from hammerhead
- Fix loading of widevine firmware
- Fix loading of keymaster firmware
- Ported July 2016 Security Patches
2016-06-19
- Fix swipe functionality on AOSP keyboard
- Fix crash of AOSP Keyboard on fresh install
- Updated CM Code
2016-06-09
- June 2016 Security Patches Included
- Enable Swipe functionality on AOSP keyboard (Broken)
- Updated CM Code
2016-05-12
- May 2016 Security Patches Included
- Updated CM Code
2016-04-07
- April 2016 Security Patches Included
- Updated CM Code
2016-03-17
- 01 March 2016 Security Patches Included
- Updated CM Code
2016-03-10
- Implemented new backport of Signature spoofing primarily for microG framework
- Signature spoofing now needs to be enabled in Settings->Developer options->Allow signature spoofing
- Fixed crash on initial Setup Wizard
- Updated CM Code
2016-02-16
- Updated CM Code
2016-02-03
- Updated CM Code
- 01 February 2016 Security Patch Included
2016-01-26
- Updated CM Code
2016-01-18
- Fixed battery stats - readings should be as accurate as with FireOS
- Updated CM Code
2016-01-14
- Switch to using Amazon 4.6.6 US Binaries
- Removed CM Camera App due to instability and Flash not working
- Snap Camera HDR or Open Camera are the most stable options
- Fixed 5 GHz WiFi issue (Amazon 4.6.6 binaries)
- Update CM Code
2016-01-11
- Fixed HDCP for wireless display - Enjoy Netflix via Miracast
- Fixed compass, should now show the correct direction
- Improved GPS accuracy - needs testing
- Add voice-handset-hac entry to mixer_paths.xml from Stock 4.6.3 firmware
- 01 January 2016 AOSP security patches included
- Updated CM-11 Code
2016-01-04
- Cleaned up build.prop
- Add launcher rotation setting to build.prop (disabled by default)
- Add lock screen rotation setting to build.prop (disabled by default)
- Updated CM-11 Code
2015/12/23
- Updated CM-11 Code
2015/12/09
- Updated CM-11 Code
- Making baby steps with Camera
- Now able to load the OV680 firmware but still no benefit at the moment
2015/11/25
- Updated CM-11 Code
- NFC is now working
- Fixed bug which prevents phone from entering Deep Sleep Mode
2015/11/19
- Updated CM-11 Code
- Xposed now installs correctly
- Remaining Stagefright fixes are included
2015/11/15
- Updated CM-11 Code
2015/10/24
- Updated CM-11 Code
- Back port signature faking to enable use of microG framework
2015/09/30
- Updated CM-11 Code
- In camera app, fixed upside down orientation for rear camera in portrait and landscape
- In camera app, fixed video recorder crashes
2015/09/25
- Updated CM-11 Code
- Establish 3G/LTE connection faster
- Switch to using 4.6.3 binaries
2015/09/16
- Updated CM-11 Code
2015/08/29
- Updated CM-11 Code
2015/08/10
- Updated CM-11 Code
- Stagefright patches included
- Dirty Flash should be fine.
2015/07/26
- Added back Stock Browser App
- Added back Stock Calendar App
- Changed recommended Gapps in the OP to PA Gapps Modular Pico
- Added Known Issues to OP
- Remove Stock Camera App
2015/07/25
- Updated CM-11 Code
- Build PowerHAL from source
- Fixed random crash occurring in PowerHAL
- Build memtrack library from source
- Build keystore library from source
- Removed oemcrypto library (Responsible for a lot of google play service crashes)
- Haven't had a single crash yet running HDX Nexus Gapps which had the highest rate of occurrences (But early days)
- Setup hardware key options correctly
- Ignore the stock camera app, I was using it for debugging purposes and forgot to remove it.
2015/07/15
- Camera button fixed for taking photos
- Torch fixed
- Made a change to WiFi config - may help with 5GHz connecting without needing channel changes.
- I don't have 5GHz so can't test
- Disabled NFC for now, this should improve battery life due to no repeated startup and failure of service.
2015/07/08
- Partially fixed up camera: Use Open Camera from Playstore
- Selecting video mode in Google Camera crashes the App, need to clear app data to make it work again.
- Pictures taken with the flash are washed out.
- Fixed Battery Stats
- Implemented NFC - Not working
- Removed Stock Calendar app
- Removed Stock Browser app
- Removed Stock Camera app
- Removed unnecessary media kernel modules just taking up space.
2015/07/07
- Fixed Media Playback
v2015/07/06
- Initial BETA Release

Frequently Asked Questions
Question 1:
I installed HDX Nexus Gapps and now want to use Mini Gapps package. However CM-11 seems to preserve HDX Nexus Gapps. How do I fix this?
Answer:
- Flash this in Safestrap
- This wll clean the /system partition ready for fresh installation.
- You will then need flash a new ROM, Gapps etc.
- This is required, as a result of a change I made in the recovery code to protect Safestrap from been wiped out.
Question 2:
My phone doesn't show up when connecting via USB, what's going on?
Answer
- This may help
- Go into Settings->Storage
- Click on the 3 vertical dots in the top right corner
- Select "USB computer connection"
- Then select Connect as "Media device (MTP)"
- Your phone should then appear as a Media Device
Question 3:
How do I get into Amazon's stock recovery?
Answer
- With the phone powered off
- Whilst holding the volume up key, press the power button.
- When it power's on let go of the power button (still holding the volume up key)
- You should end up in stock recovery.
Question 4:
The camera button isn't working on the 2015/07/25 build, how do I fix it?
Answer
- On the lock screen look for the camera icon in the bottom right corner
- swipe it left and select which camera you want as default
Question 5:
When will we get CM-12?
Answer
- Hold the phone, we only just got CM-11 - enjoy!
- We need an updated kernel so we need FireOS 5 with working root
Question 6:
Contribution by: @hijax2001
How do I reset to Factory Stock 4.6.1 - removing CM11/root/Safestrap in the process?
Answer
1) Downloaded Minimum ADB tools, installed to C:\ADB for convenience
2) Downloaded 4.6.1 stock image from http://fire-phone-updates.s3.amazonaws.com/update-fire-phone-33.4.6.1_user_461013320.bin, saved it to C:\ADB and renamed this file update.bin
3) Followed these steps to gain ADB USB access. Alternately, I found out later I could go to Settings on the phone, then to Device, then to "Get info about your Fire" and then tap on the Model Number several times until "Developer Options" comes up. Clicking that will take you to the option to enable "USB Debugging".
4) I also grabbed the Kindle Fire ADB drivers from here for convenience in Step 7 (below)
4) Rebooted into stock recovery by holding Power and Volume Up. Yes, you can do this from anywhere - phone on or off. And yes, you can still get to stock recovery this way even if you have Safestrap recovery installed
5) Use volume down to reach "Apply update from ADB" option then press Power
6) Open Command Prompt from Windows, reach your ADB folder (mine is C:\ADB in this example), type ADB devices. If you see what looks like a serial number (letters and numbers), then ADB is seeing your phone and you can skip to Step 8. If nothing there, follow Step 7.
7) For me, ADB did not initially detect my phone. I ended up having to go into Control Panel in Windows, to Device Manager, find the Fire phone, choose Update Drivers, then Browse My Computer, Let Me Pick, Show All Devices, Have Disk, then find the folder from Step 4 (above) and add Android Composite ADB Interface by hand. Once I did that, I unplugged and replugged the USB to the phone and then typed "ADB devices" again at the ADB command prompt, like in Step 6. There it is! Ok, next step...
8) Type the command ADB sideload update.bin and let the magic happen. When done, reboot the phone and everything is reset.
9) If you're going to sell the phone, or if you don't want all of your Android apps from before repopulating (because some of them just aren't going to work or work correctly under Fire OS), immediately go to Settings/Device and "Factory reset your Fire" - this will wipe the SD partition where the old apps are saved.
Cool side-note, regarding Step 9... I still had Nova launcher available. Running it under Fire OS works great! Nice to have the stability of the Fire OS the hardware desires, along with a zippy, traditional launcher to navigate.
Question 7:
Contribution by: @DatwasEz
MUTE Button does not work during calls, what can I do about this?
Answer:
- Btw on a side note I have noticed that although mute button doesn't work during calls, you can press the pause button for hold, this acts like mute and they can't hear tested myself last night
-
Question 8
Contribution by: @gooserayos
How do I configure Snap Camera HDR for my Fire Phone?
Answer:
- Click the bottom left menu icon then click the "Other" tab
- Check "Show Advanced Settings"
- Go back to "Photo" tab
- Check "Zero Shutter Lag" and (optional) "Denoise"

Congrats
Sent from my SD4930UR using XDA Free mobile app

I wish best of luck for your work
Do you have donation button? Everybody likes coffee

bufferfree said:
I wish best of luck for your work
Do you have donation button? Everybody likes coffee
Click to expand...
Click to collapse
Thank you. Look on one of my posts and it's the yellow button just below my avatar.

Let the games begin
- The Files are up now.
- Appreciate any testing and feedback/comments
- Please report bugs as per the OP.
- Enjoy - it's been long overdue.

ggow said:
- The Files are up now.
- Appreciate any testing and feedback/comments
- Please report bugs as per the OP.
- Enjoy - it's been long overdue.
Click to expand...
Click to collapse
awsome
thanks for your hard work

I'll use my unlocked fire phone as a guini pig
Now to root flash etc on osx lol

hi cant install cm11.zip with safestrap
get failed
phones rooted

m4nik10 said:
hi cant install cm11.zip with safestrap
get failed
phones rooted
Click to expand...
Click to collapse
Can you tell me what the error is you get?
EDIT: Just tried flashing again and it works fine here.

m4nik10 said:
hi cant install cm11.zip with safestrap
get failed
phones rooted
Click to expand...
Click to collapse
Your phone is rooted, right?

sergio687 said:
Your phone is rooted, right?
Click to expand...
Click to collapse
Hello sergio687, did the zip file flash ok for you?

Package can't install over incompatible data

ggow said:
Hello sergio687, did the zip file flash ok for you?
Click to expand...
Click to collapse
I'm at work right now. I'll see if it flashes tonight (Central Time). Which bugs have been reported?
Thanks for your hard work by the way

m4nik said:
Package can't install over incompatible data
Click to expand...
Click to collapse
Before installing perform a factory reset from Safestrap Wipe menu - that should fix it.
I'll add a instruction to the OP.

m4nik10 said:
hi cant install cm11.zip with safestrap / Package can't install over incompatible data
Click to expand...
Click to collapse
I bet 10$ (@ ggow) that the device is not properly wiped. ^^
@ m4nik10 Please choose "wipe" from the (safestrap) recovery menu ➜ swipe to 'factory reset' ➜ reboot into recovery ➜ choose "install" ➜ try the CM11 zip file again.

sergio687 said:
I'm at work right now. I'll see if it flashes tonight (Central Time). Which bugs have been reported?
Thanks for your hard work by the way
Click to expand...
Click to collapse
I have put some known issues in the OP, nothing more that I have seen yet.
No worries

Bingo Bronson said:
I bet 10$ (@ ggow) that the device is not properly wiped. ^^
@ m4nik10 Please choose "wipe" from the (safestrap) recovery menu ➜ swipe to 'factory reset' ➜ reboot into recovery ➜ choose "install" ➜ try the CM11 zip file again.
Click to expand...
Click to collapse
Snap
I have updated the Fresh install instructions in the OP.

2 more bugs... phone tells me “sim card not present“ and Bluetooth can not be enabled.

Related

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What does this rom feature? Well it is based off from the latest G935FXXU2ERG2 (Oreo) base, with all apps removed that can be downloaded threw the playstore, so it is debloated as well. I really like touchwiz as it is on 8.0, that's why I only mode some small modifications to samsungs firmware.
In the future I will add some mods as well, but at the moment I'm confident with the mods I got
You have a question and want to check if it already has been answered? Please check the Q&A Post!
Who should install this rom? All people who like samsungs stock interface with some modifications
Also I'd like to make the super fast experience of the s7 even faster, with even more batterylife, let's see if this can be true
Nobody is allowed to take stuff from my rom without asking me! Thank you.
IF YOU FOLLOW MY STEPS BELOW, YOU WILL MAY LOSE YOUR WARRANTY, KNOX WILL DISPLAY 0x1! I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE!
Rom features of V3.0.1 Oreo:
- Based on latest G935FXXU2ERG2 Oreo base
- Latest Busybox installed (1.29.2)
- Aroma installer! with support up to 4GB zip files
- Full edge support features support
- Adblocker enabled or disabled (choose in aroma)
- Full rom control!! V2.1
- Zipaligned
- First fully deodexed rom without odex framework
- Rom informations and logo
- choose IOS or stock emojis in aroma
- DM-Verity disabled
- Force encrypt disabled
- ADB fully working
- Modded SystemUI with many tweaks in RomControl
- Applock feature supported
- Floating Message support
- Many csc tweaks!
- No sms to mms auto convertion
- Auto Call recording
- 3Minit Clock/battery in romcontrol
- Custom clock positions and customizations in romcontrol
- LED indicator in settings
- USB Plug/Unplug disable wake up
- Remove high volume warning for headphones
- Private mode fixed for all kernels
- Enable TouchKey light duration in RomControl
- Knox stuff is removed
- Stock ERH1 Kernel, SuperStock-Kernel or SuperKernel (choose in aroma)
- Based off from latest touchwiz source available at this moment
- Many apps are selectable in aroma debloat menu now
- Selinux permissive on custom kernels
- Sound Mod with lot improvements! (choose in aroma)
- Latest Xposed V90.2 beta 3
- July Security Patch
- Camera Mod included (choose in aroma)
- Many other features, please read changelog to see what changed over the time
Rom review (thanks to @shark jungle):
How to install the rom:
For guys who install roms all day:
1. Be sure you got latest TWRP installed, encryption disabled and OEM Unlock ticked
2. Bootloader and modem should be up to date (can also be updated within aroma installer)
3. Flash rom and don't chose magisk in aroma, it messes with the dalvik-cache build on startup
4. In case you want VoLTE and Wifi calling make sure you got your csc installed
For guys who already have some knowledge about android and Roms:
0. Make sure you have a not encrypted device and OEM unlock is enabled in developer settings!!
1. Download the LATESTTWRP recovery(from here: TWRP) and follow the instructions on the TWRP page to get a working recovery (this step is essential!)
2. Download the rom and put it on your external SD card
3. Backup all your things to your external SD card (apps with Titanium Backup for example)
4. It's recommend to update your bootloader to G930FXXU2ERG2 and modem to G930FXXU2ERG2. You can update manually via odin flashing the files from here or update the Bootloader and modem via the aroma installer (only F/FD models can update BL/CP during flashing progress!)
5. If you have to install the bootloader and modem, boot into download mode and flash the bootloader and modem with latest odin using CP and BL tab
6. After you successfully installed your new bootloader and modem, boot your phone to your TWRP recovery
7. Now wipe everything (in TWRP: wipe, format data (keyboard will pop up), type yes, reboot recovery
8. Install the rom and DON'T chose magisk! That is important as it messes up dalvik-cache build on first boot
9. Install your providers/carriers csc
10. Reboot and wait around 10 minute (deodexed roms need longer to boot the first time)
11. Don't interrupt the process of booting the phone, even when it restarts
12. After successfull boot, setup your phone with the initial screens
13. Reboot your phone into TWRP and flash magisk (find it here)
14. After setting up your account etc. go to romcontrol, grant it root access that my default Settings can be applied!
15. Enjoy the new rom version
For guys who are beginner on android:
1. Start your phone, go to settings, about device, software info and hit build.number around 10 times so developer options will show up
2. Open developer options and tick: OEM unlock
3. Shut your phone off
4. You now need a computer, download latest odin
5. You have two possibilites: 1. Update bootloader and modem during aroma installation of the rom (F/FD/W8 model only!). Or 2. Update bootloader and modem via Odin. To update manually via odin, please do following: Download this two files, BL is bootloader and CP is the modem: Choose your correct model version
6. Boot your phone into download mode by pressing: home+volume down+power on
7. Open the downloaded odin on your windows pc and click on BL tab and add the file that name begins with BL (bootloader), same for CP (modem) tab
8. After this, reboot to download mode again
9. Install TWRP (latest one is needed to support new BL's) will be next step, for this, follow all steps provided in this forum: TWRP Thread (booting into download mode: press home+volume down+power on, booting into recovery mode press: home+volume up+power on)
10. When you got TWRP working: We need to disable encryption, for this you should boot into recovery mode (as described above)
11. To get rid of encryption, go to "wipe", format data (keyboard will pop up) then type "yes" and format it, then reboot to recovery
12. After flashing this, hit wipe, full wipe (this will clean all internal memory and your data will be lost!!)
13. You can test if encryption is still enabled, if TWRP shows error about not mounting /data your phone is still encrypted
14. Now you can download the rom onto your PC and then transfer it via usb to your phone
15. It is rom installing time install the rom! One important thing to mention here: don't chose magisk as root. Why? It messes up dalvik-cache on first boot and that will result in a lagging device. We will setup magisk later on.
16. Install your desired CSC right after rom install! That's the best way. You find the link below.
17. After successfully installing the rom and csc hit reboot and you are good to go!
18. After successfull boot, setup your phone with the initial screens
19. After the initial setup, boot into twrp recovery and install the magisk zip. You can download it from here.
20. After flashing the magisk etc. go to romcontrol, grant it root access that my default Settings can be applied!
21. Enjoy the new rom version
22. If you want you can use my csc selection to get your desired csc, if you want that you can grab it here: CSC Selection V2.4.5
For guys who want to watch with a video (thanks to @aaj!):
Downloads for SM-G930F/FD/K/L/S/W8:
V3.0.1 on Androidfilehost
V3.0.1 via GrifoDev
SM-G935F/FD/K/L/S/W8 Bootloader and Modems
CSC Selection V2.5.0
Latest SuperMan MM release (V1.19.1)
Latest SuperMan N release (V2.9.0)
Useful links:
Question and Answer post
Question and Answer Thread for users under 10 posts
All Changelogs
General useful links and infos
DarkSide of N theme infos
Telegram/GrifoDev Links:
Our own new Forum on grifodev.ch
Telegram SuperMan Chat
Telegram Channel (latest infos)
Known Bugs:
- None
Sources:
- Rom Source
- SuperKernel Source
- SuperStock Source
- RomControl Source
Official XDA signatures made by @Quicksilver:
Credits:
- Samsung for the Source
- SuperR for the Kitchen
- Chainfire for the root access
- Sound mod V19 thanks to zubi182
- amarullz for aroma and nkk71 to make it compatible with bigger zip files
- wubydax and daxgirl for SuperMan control
- topjohnwu for systemless Magisk
- myellow for all the great animations!
- mwilky for his fingerprint after reboot mod and general help
- Asc1977 for all the help on latest N release!
- zeroprobe for his camera mod V8
- "Superman DC Universe Online" by "Fictional-Battle-Omniverse", available under CC BY-SA 3.0
- Credits for settings landscape: Designed by Freepik
- If I forgot someone, please send a private Message to me!
Please hit thanks if you like this work here or you may want to buy me a beer? You can donate down here clicking the image or the link
PayPal
SuperControl Pro on PlayStore​
XDA:DevDB Information
SuperMan-Rom for herolte, ROM for the Samsung Galaxy S7
Contributors
Tkkg1994
Source Code: https://gitlab.com/Tkkg1994/SuperMan-Rom
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Custom Recovery
Based On: Stock Based
Version Information
Status: Stable
Current Stable Version: V3.0.1
Stable Release Date: 2018-08-31
Created 2016-04-11
Last Updated 2018-09-25

Changelog:
Old Marshmallow V1.X Changelogs:
SuperMan-Rom V1.10:
- Rebased on G935FXXS1APG5 firmware
- all mods remade by zero
- added potato clock into aroma options
- updated xposed to V86.2
- updated xposed application
- fixed s7 splash screen not centred
- fixed USSD codes not working for some users
- removed weather on lockscreen (could not find a good way for romcontrol)
- update OTA icon and romcontrol icon in settings (thanks to @myellow)
- added screenshot and screenrecorder buttons to reboot menu
- added settings and qs observer
- Added aroma option for stock or new message app
- some more things I may forgot
SuperMan-Rom V1.10.5:
- Added new RomControl V2.0
- LockScreen Timeout adjustable
- Updated battery bar to V2
- Updated traffic manager (network speed)
- added a button to statusbar (so reboot menu will appear)
- added data usage to statusbar
- added a switch in rom control for multi user avatar
- made a switch for heads up notifications
- added a switch for on ongoing charging and media connected
- enable gear device infos
- enabled carrier lable (color and custom can be set)
- Notification panel background can be set
- rounded or stock notifications can be set in romcontrol (also background of them)
- custom background for incall UI
- Added weather on lockscreen to rom control
- Next alarm will now only be displayed if a new alarm is set (and the icon will not be there if no alarm is set)
- Many more things I may forgot
SuperMan-Rom V1.11:
- Fully rebased to APGO firmware (not rebased to BPH6, reason: no kernel source, not rootable and no edge build...)
- fully remade all mods from scratch
- 3dot lag solved, finally!
- added torch to reboot menu (rom control entry)
- battery percentage is now colorable (rom control)
- added ram bar to recent (rom control)
- enabled lockscreen rotation (rom control)
- low battery warning is now adjustable (rom control)
- flashlight on camera can now be used on low battery too
- Updated SuperKernel to 1.6
- SuperStock updated to 1.2
- private mode now fully working, even after reboot
- fully customize the brightness slider in statusbar (rom control)
- network speed has now two separate colors for up and download
- magisk v3 with PHH's root added (this option needs a FULL WIPE)
- Xposed V86.4 added (only works with magisk)
- long press back key to kill application (rom control toggle)
- cleaned up rom control in general, was a bit messy
- added adaway and ota to settings (thank to @myellow for the icons!)
- added new modded camera thank to @zeroprobe
- updated CSC to APG1
- updated 3minit app
- added f2fs/ext4 selection to aroma. If you do not understand this, just keep default ext4 and change nothing, f2fs is applied to cache and data, system does result in a bootloop
- more things I may forgot
- I did not have time yet to fix the white on white background on notification, for this just change general background in rom control. same for the weather widget, will do this in next release!
SuperMan-Rom V1.12:
- Fully rebased and remodded on BPH6 source (flat users can use the new BL since we got a twrp update)
- removed colorable battery percentage (because of issues with white on white background)
- new gallery app included
- august security patches applied
- superkernel updated to V1.7 and superstock to V1.3
- Added a toggle to remove emergency mode from reboot menu
- Added rom control option to enable music skip
- Update notification background, it can now also be transparent (should fix white on white issue)
- Added carrier label is now colorable on lockscreen
- you can now change the size of the font in settings (so you can read it better when you got two sections)
- magisk updated to V6
- phh's root updated
- xposed updated to V86.5
- added magisk compatible supersu zip
- virtual lock buttons updated
- weather on lockscreen updated, thanks to @tamirda for his help!
- csc updated to ITV BPH1
SuperMan-Rom V1.13:
- Rebased on official BPHJ base
- all mods remade from scratch
- stock kernel updated (BPHJ), superkernel and superstock updated with latest ramdisk
- added autostart option to settings
- removed FOTA (since we don't get any official updates)
- updated supersu to V2.78
- added magisk busybox
- added magisk viper4android
- updated romcontrol to V2.1
- colorable wifi, LTE, airplane, roaming toggle
- added toast notification who are configurable (romcontrol)
- Superkernel has for this special version NO OC and UC (for testing) if it get's better with freezing
- fixed quicklaunch in recent not appearing
- Fix problem that incallui bg is the same as notification bg
- Camera mod to V5 updated
- September patches
SuperMan-Rom V1.13.1:
- fixed 2 times autostart
- fixed gallery crashing
- fixed gear vr crashing
SuperMan-Rom V1.14:
- Fully rebased and remodded on BPIF
- latest BPIF ZTO csc included
- updated supersu to SR1
- updated xposed installer application
- autocall recorder fixed
- Superstock updated to 1.4 (including BPIF ramdisk)
- SuperKernel updated to 1.8 (Prerelease on rom)
- Enabled launcher rotation
- colorable clear and notif buttons
- colorable user text on lockscreen
- hopefully fix applock
- add torch into settings
- last but best feature: use fingerprint after a reboot, biggest thanks to @mwilky for his awesome work he did there!
SuperMan-Rom V1.14.5:
- iOS 10 emojis added
- screenshots are colorable now in romcontrol
- reworked xposed/supersu selection in aroma
- added phh latest supersuser
- updated magisk to V7
- Updated xposed to V86.6
- Updated all magisk mods
- Added TW swipe to modded launcher
- Updated superkernel to 1.8.5
- Updated superstock 1.4.5
- Romcontrol default values adjusted
- zubis sound mod updated to V18
- Adblocker updated
- Phh's apk updated to latest beta (looks much nicer now)
- xposed apk updated
- magisk apk updated
- samsung music apk updated
SuperMan-Rom V1.15:
- Rebased on latest BPJ7
- Remodded and retweaked everything
- Fixed volume rocker problem
- Install supersu before magisk so magisk is compatible now with supersu
- Magisk updated to V8
- Magiskmanager updated
- Remade aroma installer, hopefully little bit clearer now
- UDS and Screencast toggle in statusbar
- InCallUI colorable
- Fixed superman control FC
- Updated both kernels with latest ramdisk base
- Fixed some synapse stuff (eg after clean flash no UCI support showed)
- October security patches included
- CSC updated to latest INS one
- Replaced potato clock with 3minit clock
- Many more things I already forgot again lol
SuperMan-Rom V1.15.5:
- Fixed toast message not working in romcontrol
- fixed contacts crash
- updated sms application (the patched one, should now support more lanuages)
- updated applock
- updated floating message
- added network powersaving
- updated all kernels (except stock) to fix the urgent security issue
- updated phh superuser apk
- changed to DBT csc as default, hopefully for those who had problem with volte it will work now
- changed debloat title, was confusing before
- remind users at the end of installation to flash csc
SuperMan-Rom V1.16:
- Update to base BPJG
- November security patches
- remodded from scratch
- busybox updated to 1.25
- busybox app updated
- launcher rotation disabled (no one seems to like it)
- magisk app updated
- magisk phh root updated to r266-2
- updated all kernels to BPJE source drop base
- Xposed apk updated
- new smali/baksmali method used for deodex
- hidesu phh root added (r266)
- OperaMax apk as debloat in aroma (and without any launcher icon now)
- UPSM apk as debloat app in aroma (to control apps on UPSM)
- added double tap to sleep on statusbar (credits to @tamirda)
- adaway enabled or disabled in aroma (because of 3minit battery)
- fixed AppLock fcs because of signature
- fixed sms patch apk scheduled settings
- added samsung nougat emojis
- added aroma selection for csc. Default would be ITV as it is the base for it. You can also chose to install no csc when you flash the csc selection right after rom install
- eventually some more things I don't remember
SuperMan-Rom V1.17:
- Based on BPKA firmware
- Remodded and retweaked from scratch
- Updated Magisk to V9
- Updated Magisk Manager to V2.5
- Updated SuperSU to SR4 (I know there is SR5 now but I don't want to reupload the rom just cause of this)
- Updated AdBlocker apk to latest official release
- Updated Host file
- Ask in aroma if you want to update modem, will be flashed if you like (BPJG is still latest), so Modem is now updatable in TWRP
- Added BL (bootloader) update to aroma (I added a warning, WHEN UPDATING BL, PHONE DOES AUTOREBOOT AFTER SUCCESSFUL INSTALLATION) Means you need to flash csc after first boot, so my suggestion is: flash rom without BL and flash it in odin. So you can set up your csc correctly
- All ramdisks updated to BPKA
- Changed CSC to AUT (since we never had issues with it)
- Updated baksmali/smali
- Added some files which will may help for wifi calling (please tell me if it worked)
- Changed operamax with official one from playstore (many of you thought it is a spam app)
- Updated Xposed Installer APK
- Updated Xposed Framework to V87
- some things I forgot
SuperMan-Rom V1.18:
- Rebased on latest BPL3 base
- December security patch
- Phh superuser updated to r275
- Many aroma script changes
- SuperKernel updated to 1.9.5
- SuperStock updated to 1.5.6
- host file updated
- Updated build-in bootloader and modem to BPL3 and BPKG
- Backup function! When you reflash V1.18 you now have to option to restore your configs from last time in aroma installer and jump directly to install screen!
- Added kernel adiutor to kernel selection
- No more model choose! Everything is done by my script
- If you have a K/L/S/W8 model, that will be changed in build.prop accordingly
- Added an option in aroma to install full stock settings apk
SuperMan-Rom V1.18.1:
- Updated SuperStock Kernel to V1.6
- Updated SuperKernel to V1.9.6
- Updated SuperSU to V2.79
- Added W8 bootloader and modems to aroma installation as well (auto update), that's why the zip got bigger again lol
- Updated viper4android magisk installation
- Added magisk viper4android apk file
- Added viper4arise sound mod (untested)
- Good lock SystemUI added in aroma
- Updated Xposed to 87.1 by topjohnwu (xposed will show 87.0 but magisk 87.1)
SuperMan-Rom V1.19:
- Fully rebased and remodded on BPLB base
- Probably the most annoying bug: fixed superman romcontrol not working from stock settings (due to package change)
- fixed not installing synapse and kernel adiutor
- added build.prop tweaks selectable in aroma
- Only display csc warning if you did not install default csc which comes with the rom
- Changed ARISE to deuterium which you guys reported working fine
- Updated samsung browser with fixed secret mode thanks to @mwilky
- Some other scripts cleanups
- Changed xposed 87.1 in xposed.prop as well (87.1 will now be display in xposed app )
- Updated phh superuser apk to latest beta 10 (material)
- Updated adblocker hostfile
- Added phone info app as user app
- Updated Samsung music app (and install as user app as well)
- Updated SuperSU to V2.79 SR1
- Another attempt to fix magisk viper4android.. (included a modded audioconfig file)
- Added TWRP recoveries to aroma. You can now choose if you want to update your recovery during aroma or not!
- Updated nougat emojis from latest samsung beta
- Updated BL's to BPLB (CP is still the same)
- Updated stockkernel to BPLB
- Updated Ramdisk of SuperKernel and SuperStock to BPLB (no source code yet)
- Added scrolling launcher background to romcontrol
- Updated Kernel adiutor
- Check rom info tab for little christmas easer egg by @myellow
SuperMan-Rom V1.19.1:
- Updated magisk to V10.2
- Updated Magisk apk to version from playstore
- Updated phh magisk to r2 version by topjohnwu
- Updated phh superuser apk to latest beta
- Updated SuperSU V2.79 SR2
- Readded normal logo in settings (christmas is over )
- Added an option in aroma to keep force encryption enabled
- Updated SuperStock Kernels to V1.6.5 with new base
- Updated SuperKernel to V1.9.7 with new base
- Updated sqlite binary
- Readded max build.prop tweak (removed a few critical, you tell me how they work)
- Added init.d script for sqlite and zipalign only (no more issues)
- Updated iOS emojis to latest update
- Some scripts clean up
Latest Nougat V2.X Changelogs:
SuperMan-Rom V2.0:
- Updated to DQAS (FULL REBASE TO ANDROID N 7.0)
- All kernels updated to DQAS (Stock, Super and SuperStock)
- Latest Busybox 1.26.2 included
- Latest SuperSU SR3 included
- Latest BL DQAS and CP DQA3 included
- Latest Magisk Manager APK included
- Latest TWRP 3.0.2-5 included
- Latest SuperUser Beta11 apk included
- Latest Sound Mod V19 included (updated for Nougat)
- Latest Camera Mod V7 included (updated for Nougat)
- Removed Xposed (not compatible with Nougat)
- Added many additional apps to bloat selection
- Added support to aroma to support 4GB zip files
- ARISE sound mod updated to V2.4
- DAP sound mod included
- Many Nougat CSC features included
- Floating message working
- AppLock working
- Private Mode working
- Aroma Theme reworked
- All SuperMan icons reworked
- Bootanimation reworked
- Splash screen reworked
- Multi User fully functional
- 3minit clock included (romcontrol option)
- Battery bar included
- Safe volume warning removed
- Weather on lockscreen enabled (can be a bit buggy, N just got released LOL)
- Hide or show lockscreen clock (inclusive seconds)
- Quick launch in recents
- Network speed indicator with tint
- Background colors for QS tiles colorable
- Statusbar icons colorable
- 3minit clock aroma choosable
- Virtual lock buttons
- Ambiente display
- Data usage in statusbar
- Dynamic statusbar
- Reboot to recovery, screenshot toggle, screencast toggle etc added
- Gear reboot on statusbar (romcontrol)
- Gear device info
- Latest adblocker included
- 0.25 animation speed in settings added
- Some more things I maybe forgot again
- For all credits please check my V2.0 release Post
SuperMan-Rom V2.1:
- Rebased and retweaked on latest DQB3 release
- Bootloader updated to DQB3 and modem to DQB1
- CSC updated to most recent BTU version as well
- Updated Magisk to V11.1 (removed phh's apk, root for Magisk is now INSIDE Magisk apk)
- Updated Magisk Manager to 4.1
- Fixed a busybox problem which didn't install it correctly
- Updated all kernels with latest ramdisk and source code (DQB3 isn't released yet)
- Updated adblockers hostfiles
- Removed ARISE sound mod, they have their own aroma installer and everything now, download it here
- Updated Camera Mod to V8
- Updated my own romcontrol a bit, changed colors and stuff hope you like it
- Removed knox entry from settings
- Added custom clock settings
- 3Minit clock can now be enabled and disabled inside RC (no need to choose in aroma)
- Clock can now be moved left, in the middle, right or disabled
- Clock can be colored
- Clock style can be choosen
- Date in statusbar can be choosen etc etc (just check the clock settings in RomControl)
- For lockscreen I've fixed the weather issue, however flat users may have some problems since the display is smaller than on edge phones. I got a S7 flat and I know what I'm talking about (let me know what you think)
- Fixed weather widget displaying time twice
- Added 18 different analog clocks in RomControl (to display on lockscreen)
- Added rambar back to romcontrol (it will be displayed at the top so you can't use it at the same time as recent quick launch)
- Volume skip added (skip tracks with volume control)
- Fixed ambient display not working
- Added auto call recording
- Updated pulldown statusbar colorizing
- Fixed alarm on lockscreen
- Added app shortcuts to romcontrol
- Added launcher gestures (all working fine except enabling flashlight)
- Added touchkey light duration in settings
- Added autostart manager in setting
- Added LED indicator in settings
- Updated all toggles in restart menu to match nougat design
- Updated shutdown animation (looks perfect now)
- Added many default superman wallpapers (will only appear after a clean wipe)
- Added the dark side of superman theme
- Someone requested me to add knox apps in aroma. So there you go, knox is in debloat menu but for sure I did not flash that onto my phone
- Added google assistant in aroma choice (debloat settings)
- Added brightness fix
- Updated all additional (none samsung & google) apps to most recent version
- Added CPU-Z and Tapatalk in debloat settings
- Removed amplify in debloat (sorry for confusion!)
- Disabled signature check for apps
- Probably some more things, but I can't remember sorry guys!
- Before someone ask, all credits can be found on V2.1 Release post!
SuperMan-Rom V2.2:
- Updated to latest DQB7 base with February security patch
- Full rebased and remodded since last base
- All mods have been updated
- Kernel are all updated to DQB7 ramdisk
- Kernels do now fake knox 0x0 on running system
- Added a much better selection of build.prop and init.d tweaks in aroma (you will see what I mean)
- Added new 3d boot animations by
- Moved themes into seperate aroma installer by Check this post here
- Added an aroma choice for ambient display (should fix lockscreen lag, please report back to me)
- Added another google assistant, this hopefully fixes the problems (you have to update the google app after installation in google playstore)
- Updated BL to DQB7 (modem is still the same)
- Added new toast animations in romcontrol
- Changed some default values in romcontrol
- reboot background menu is now colorable
- matrix in recents
- Move signal and wifi to the left in romcontrol
- added an option in romcontrol to change your carrier on lockscreen
- Camera mod updated to V8.1
- Possibly some other things I already forgot again sorry
SuperMan-Rom V2.3:
- Rebased on top of DQBO release
- Updated all kernel with latest ramdisk to version V2.2.1
- Added a note to aroma that busybox is needed for romcontrol/synapse
- Removed the cache init.d in aroma which caused bootloop
- Updated bootloader to DQBO
- Reworked SuperMan Settings app (will now show "free" in addition)
- Free means that this is the app with the rom and not the one on playstore, I will release a "pro" app (same functions) with translations and just to donate me
- Added Back to kill option
- Added Recent to kill option
- Fingerprint unlock without enabling display added (works only as long as fingerprint sensor doesn't go to deepsleep)
- New icons inside the SuperMan settings app
- Added blur effect on pulldown menu
- Added clock on lockscreen is now colorable to different colors (MM/H/SECS)
- Added notification colorable with notification text colorable
- Added search bar colorable and hidden switch
- Added fully working secure folder to the rom (will also be display in pulldown menu)
- Added Samsung Pay to Knox in debloat option (since it works together)
- Updated samsung pay and samsung pay framework with latest apps from sammobile, if that doesn NOT work well just uninstall the updates (those are not system files so you can easily uninstall them)
- Added custom icons for Signal/Alarm/Wifi in romcontrol
- Fixed left clock being displayed on lockscreen, is now hidden
- Added "clear all" and "notification settings" colorable
- Added colorable background the notification pulldown
- Basically everything is colorable now in pulldown
- Updated AdAway to most recent version
- Updated included adblocker files
- Updated included bloat apps (as instagram, snapchat, signal etc)
- Updated Magisk Manager to latest 4.2.6 (which fixed all fc's)
- Fixed OTA/Rom Control icon displaying a grey background
- Updated OTA app to match superman design
- Added new superman gifs in romcontrol (black/blue and red/yellow)
- Possibly more things to mod which I already forgot again (sorry )
SuperMan-Rom V2.4.1:
- Updated base to DQCG
- Reworked from scratch!
- March security update included
- Improved permissions in system/bin (rom should now work even better)
- Update stock kernel to DQC5
- Update SuperStock to V2.4.1 (with flicker free included)
- Update SuperKernel to V2.4.1 (with flicker free included)
- Updated Bootloader and Modem to DQCG / DQCG
- Added W8 BL/CP files to be flashed with the rom
- Added font apk (installs many fonts), it's choosable in debloat menu
- Moved romcontrol and OTA to debloat menu too (if you don't want them, don't install them)
- Removed framework selection, ambient is now called a different way
- Ambient is now also working without AOD (thanks to @mwilky)
- Updated Magisk to V11.6 (safetynet shall pass with usb debugging on now)
- Updated Magisk Manager to latest version
- Updated included bloatware apps
- Updated AirMessage and Applock app
- Updated TWRP to 3.1.0
- Added a switch in SuperMan settings to enable or disable RCS (cloud icon) (thanks to @MisterEvo)
- Added a switch in SuperMan setting to toggle 4G/LTE (thanks to @MisterEvo)
- Added a choice in aroma to include software keys
- If you choose knox, tima and knox will be enabled automatically, if not they will be disabled
- Aroma log will be saved at sdcard/SuperMan/aroma/
- Music and the Simcard notification of the FD variants should be colored too (let me know if it works!)
- Adjusted weather on lockscreen to match better, in next version there will be a big rework
- Fixed alarm icon being weird on theme ( @_alex74_)
- Added blur effect on pulldown colorable
- Added a switch to hide brightness slider on pulldown ( @mwilky)
- Added SystemUI tuner thanks to @lyapota (long press on settings icon in pulldown to activate it)
- Added option to color stock battery icon
- Added a switch to enable rounded notifications (aren't colorable for now)
- Added blur effect on recents
- Added many new items on pulldown menu
- Added back "Torch on Lockscreen", it's now in SuperMan settings under "misc systemui"
- Enabled lockscreen notification limit can be raised from 1-3
- Updated smali/baksmali for deodexing
- Updated all social media bloat apps (for example "signal" got secure video call feature)
SuperMan-Rom V2.5.0:
- Rebased on latest DQD3 release
- Remodded everything from scratch (this base had many changes compared to previous updates)
- April Security patch
- Updated Magisk to V12
- Updated Magisk Manager
- Updated phh superuser to r310
- Updated included adblocker host files
- Updated included BL/CP to DQD3/DQD2
- Fixed barometer displaying weird stuff on lockscreen
- Updated all bloat apps such as telegram/snapchat/titanium etc
- Updated Kernels to V2.5.1 version (new linux and new ramdisk)
- Updated included modded camera thanks to @djb77
- Added S8 camera to aroma, thanks to @_alex74_
- This update is mostly for stability and security!
SuperMan-Rom V2.6.0:
- Rebased on most recent DQG1 release
- Updated all included kernels to latest ramdisk/kernel source
- This update includes the July patch already!
- Updated Magisk to v13.3
- Updated SuperSU to 2.82 SR1
- Updated included bootloader to DQG1 and modem to DQF2 (still latest one)
- Updated included BTU csc
- Readded outdoor mode in settings app
- Removed OEM unlock switch with modded settings (so no one can accidentally turn it off)
- Added a switch in romcontrol for immersive mode
- Added support for calculator unit converter
- Added a switch to romcontrol to enable/disable transparent background
- Notification icons can now be colored too in rc
- SMusic app can also be fully colored thanks to @Thereassad
- Updated busybox installer
- Updated all included bloat apps (telegram, tapatalk etc.)
- Removed the "no csc" choice, since this only messes settings entries
- Removed S8 camera, we have a full port for this and the camera doesn't work perfectly on s7 base anyway
- Removed all needless build.prop and init.d tweaks, in my opinion this is the reason for heating and battery drain!!
- Fake system status to official (before was custom) @mwilky
- I simply didn't had the time to investigate into the SystemUI crashing while moving apps to SD with modded UI, I hope you can forgive me as I already promised it before...
- I hope that was all, maybe I forgot something
SuperMan-Rom V2.7.0:
- Based on latest DQIC release by Samsung (full rebase)
- Includes most recent August security patch (Samsung doesn't release the September patch to any device due to Blueborne fix)
- This base includes blueborne fix for bluetooth vulnerability
- Updated included modem and bootloader to DQIC for F/FD devices and BQH2 for W8 models
- Updated kernels to latest V2.9.0 versions build on DQIC source drop
- Updated Magisk to latest V14.2 beta
- Updated SuperSU to latest SR5 beta
- Updated sound mod with latest sound file, this should fix some issues with wifi calling
- Removed viper4android, due to the fact that it broke sound on s8 roms, you should flash ARISE or similar mods after the rom itself
- Updated busybox to latest 1.27.2
- Added some more apps to debloat selection, edge apps for example and some more voice files and for VR
- Removed OTA due to the fact that it wasn't working anymore, we will come up with a better solution in the future
- Added a switch in romcontrol to enable/disable high volume warning
- Added a new function to clear memory in pulldown menu
- Updated romcontrol application, changed name to SuperControl Free
- Updated included CSC
- Updated AppLock, ScreenRecorder and AirMessage
- Updated included bloat apps such as Telegram, Signal, Hike and Snapchat
- Included all fixes from last time, means Weather and alarm on lock screen works fine without any need to flash a file :good:
SuperMan-Rom V2.8.0:
- Based on latest DQK1 base released just a few days ago!
- Includes the latest November security patch
- This base includes Krack fix (if you want more informations about it, check it here: KRACK Attacks: Breaking WPA2)
- Updated included bootloader to DQK1 for F/FD models (modem is still the same)
- Updated kernels to latest V2.10.1 versions build on DQK1 source drop
- Updated Magisk to latest V14.4 beta
- Added Xposed V88.2 magisk (this xposed variant will only work if you select magisk at the same time!)
- Removed many 3rd party bloat apps, like this we save much space
- Added GBInstagram (modded instagram), GBWhatsapp (modded Whatsapp) and modded Youtube to allow background playing!
- Added listview animations to romcontrol
- Added colorable screenshot text to romcontrol
- Fixed long press on settings icon on pulldown not enabling SystemUI tuner + fc
- Fixed imsservice crash with the switchable RCS icon
- Updated the updater script binary
- Fixed notification panel custom image not sticking after a reboot
SuperMan-Rom V2.9.0:
- Rebased on latest DRAG base
- Includes the latest January security patch
- Updated included bootloader and modem to DRAG for F/FD models
- Updated kernels to latest V2.11.0 versions build on DRAG source drop
- Updated Magisk to latest V15.3 stable
- Updated Xposed to V89.2 magisk
- Install Xposed app as user app, before it got installed as system app
- Updated TWRP to latest 3.2.1-1 version
- Updated GBInstagram, GBWhatsApp and modded Youtube (to play background videos)
- Updated busybox
- Updated included csc
- Updated applock, airmessage, screenrecorder
- Updated zeroprobe camera mod
- Added quicktiles for VoLTE and Wificalling

Useful posts and links
App on PlayStore:
Find my own SuperMan app on PlayStore: SM Settings App
Odin:
Find all latest odin and samsung tools on this link: Samsung-Tools
In case you need help:
Try to take a look at my Q&A Thread where hopefully some general questions are already answered.
TWRP links:
TWRP S7 Thread
Official TWRP website for s7
Bootloader and Modems:
SM-G930F/FD/K/L/S/W8 BL and CP (all models in one folder!)
SM-G930F/FD BL and CP
SM-G930K BL and CP
SM-G930L BL and CP
SM-G930S BL and CP
SM-G930W8 BL and CP
Xposed Threads (MM ONLY):
Wanam Xposed V87
Systemless Magisk Xposed V86.6
Official Xposed V87 (DOES NOT WORK ON SAMSUNG DEVICES) visit this website only for changelogs and infos from rovo!
Material Xposed Installer
General Xposed Discussion
In case you want to use systemless xposed, but don't want to switch to magisk, install last magisk free Xposed V86.2. Download is here.
Magisk related Threads:
Magisk V13.3
Magisk Discussion
How-To create a Magisk module
Phh magiks superuser
Magisk module collection
Root related Threads:
Sound Mod V19
Camera Mod V8.1
How to encrypt on custom rom (MM ONLY)
Phh's superuser
Phh's hidesu
Phh's official apk
Phh's material APK
Stable SuperSU releases
Beta SuperSU releases
Chainfires suhide
Kernels Threads:
Kali Nethunter
TGP Kernel
SuperStock Kernel
Prometheus Kernel
SuperKernel
Voltaqe kernel
Roms made by me:
SuperMan-Rom which you are currently on its thread
HydraRom which is a full note 7 rom compatible with our s7.
SuperStock-Rom which is as close to stock as possible with some nice additions.
Samsung Links:
Sammobile Website
Latest samsung apks
Samsung Opensource Center
Live samsung updates
Fast firmware downloads
Good Lock:
Latest Good Lock APK can always be found on Apk Mirror.
Thread about CSC:
Download latest CSC from CSC Selection V2.4.0
All CSC's ever released
How to donate:
Donation via normal PayPal
Donate via PayPal.me
Batterylife with V1.16:
Geekbench 4 Results with V1.16:
Antutu Benchmark Results:

HERE WE GOOOOOOOOOOOO!!!!!!!!
Sent from my SM-G930F using Tapatalk

Questions and Answers
Basic Questions:
Q: How to get into Download Mode?
A: Power off your phone, than hold: home + volume down + power on button until you see the download mode.
Q: How to get into Recovery Mode?
A: Power off your phone, than hold: home + volume up + power on button until you see the recovery mode.
Q: My Phone is stuck at boot and doesn't start, what to do??
A: Update your bootloader and modem. Also make sure you have made a fresh install of the rom. Bootloader and Modem can be found in the OP. Another problem can be that you are didn't decrypt your phone. To fix this read below how to disable encryption.
Q: Do I need to update bootloader and modem after every update?
A: It's recommend to update your bootloader and modem everytime there is a new base yes. The developer will tell you if necessary on every rom changelog.
Q: I get verification failed at start up!?!? My phone is broken now?
A: Yes, you have to buy a new phone now. Just kidding You did not disable force encryption in TWRP (how to do so you will find below in how to decrypt your phone).
Q: I get verification FRP LOCK? WHYYYYYY???
A: Very simple answer, you did not enable OEM Unlock in developer options. Now you need to flash full rom with odin again and start from scratch. But don't forget to enable OEM Unlock this time!
Q: Which devices are supported at the moment?
A: Current supported devices are: SM-G930F/FD/K/L/S/W8. Snapdragons are NOT supported
Q: Is this rom working on Snapdragon 820 variants?
A: No, sadly not.
Q: I want to change something in my rom setup, how can I do that?
A: Simply reflash the same rom version without any wipe and than choose the correct things you want.
Q: Some features are not present in this rom, but they are on stock rom, so where are they?
A: In aroma installer you have the option to select bloat you want to install or not, you probably didn't select all package, this is why it's missing now.
Q: After a clean install my phone is overblated with many custom settings. What to do?
A: Open my romcontrol, grant it root permissions and then my default settings will be applied.
Q: Will you add X or Y feature?
A: You can kindly ask in the thread for that, if I like your suggestion I will think about adding it to the rom.
Q: You said you fixed SD card RW but Titanium Backup can't write to external SD card, why???
A: This is because of googles changes concerning SD card, to fix this open Titanium Backup, Menu, Preferences, Backup Folder Location, Storage provider and than hit DocumentProvider Storage and select your SD card. Problem solved
Q: I can't find X and Y mod. Please help
A: I've added many links and useful stuff to this post here. Hope that's what you have been looking for!
Q: I want to have my external storage like an internal as well. Google introduced it with android Marshmallow, but I can't see this option?
A: Just follow this Guide here and you can setup your SD card as normal storage
Q: I got a new strange icon appearing after nougat update. What's that?
A: This is a new advanced calling feature introduced in android nougat. Should make your call quality better or something like this. To hide it please visit following forum: Get rid of RCS icon
Q: I installed Viper or other sound mods, but they won't work, why?
A: You most likely missed to freeze sound alive, if you did this and it's still not working you it's due to the kernel. Stock kernel doesn't support these mods since we need a permissive kernel!
Questions concerning rom updates:
Q: Do I have to do a full wipe for the new version?
A: It is always the best option to make a clean install, otherwise please don't come and report bugs!
Q: But I don't want to make a full wipe when only small stuff changed!
A: For updates using the same bases you can install the rom with a dirty flash. BUT with a new base a clean install is highly recommend!
Q: What steps should I do to update to a new version with a full wipe but keep all data?
A: There are some different ways. One way is to make a backup with Titanium Backup, you can backup all Apps and Preferences there. Make sure to store this backup on external SD card (if you have one). Second way would be to save your data onto a google account or samsung cloud and restore it after a clean install.
Q: I miss an apk after rom update, how can I get it back?
A: Simply reflash rom and select "dirty flash" in aroma + select the app this time in aroma.
Q: My battery life is so bad and performance is very poor after an update!?!?
A: This comes actually not form the rom itself, dirty flash can cause problems even if only some small things have been changed. So simply install it clean again and it will solve your problem.
Q: Performance and battery is very poor even after clean install. What should I do now?
A: I assume you installed Xposed than, some modules can cause batterydrain and performance problems. So try to make a clean install of the rom WITHOUT xposed installed.
Questions about log and logcats:
Q: I got FC's and other Problems with the rom, what to do?
A: Take a logcat for me, developers use to say: without a log, it never happened . A logcat can be grabed with a PC and ADB installed, simply type: adb logcat > log.txt while your phone is connected and the error is happening. Same can be done if you have a terminal installed on your phone. Simply type adb logcat > log.txt and you will have the same output as on the PC.
Q: What kind of logs can I provide to help you?
A: Logcat: This one is for general infos about FC's
DMESG: this is for kernel related things
Last_Kmsg: this can be used after a random reboot
Q: How to get logs?
A: 1. Connect your phone to your pc
2. Make sure you got usb debugging enabled
3. Install Minimal ADB tool
4. After install open it and type: adb logcat > logcat.txt, adb shell dmesg > dmesg.log, adb shell cat proc/last_kmsg kmsg.log
5. Send me the file you got
You can also send me a log created by your phones terminal with the exact same commands!
Questions about RomControl:
Q: None of my romcontrol changes do anything, why are you such a bad dev!?!?
A: The problem is not on my end, you installed stock systemUI (which is STOCK and does not support one single mod). Use another one in aroma instead. The same thing can happen with good lock!
Q: Romcontrol gives FC's to me. HELP!
A: Very simple answer here: wipe data and cache from superman control application. Also make sure storage permissions are given to the romcontrol.
Q: Romcontrol still FC after cleaning data and cache!
A: Make sure you allow storage permission in main settings.
Q: I try to backup my current RomControl setup, but it won't work?
A: It works. Just make sure to enable storage permission in main samsung applicatoin settings. You will find it in internal sdcard under RomControl folder.
Q: I can't restore SuperMan control settings after a clean base update, why?
A: Backup for SuperMan control only works as long as you use the same version of the app, I mostly change very much things in new releases that's why it won't work there.
Q: SystemUI reboot doesn't work in SuperMan settings app, why?
A: Since Nougat update, you need to install busybox in order to get this button working. Without busybox the button will just do nothing.
Q: I enabled weather on lockscreen but I can't see anything...
A: You probably didn't setup or even installed samsungs weather widget. Without it weather on lockscreen won't work too. So reflash the rom with the widget installed this time and set it up.
How to go back to stock:
Q: I like to go back to stock rom, how is this possible?
A: I can provide you here all steps which are needed to go back to a full stock rom.
0. Make a backup and than wipe all partitions in TWRP
1. Go to Sammobile and choose your country
2. Download the file and the attached Odin on sammobile
3. After downloading, put your phone into download mode
4. Make sure drivers are installed and your pc can detect your phone in odin
5. If the box in odin turns blue, add the AP file to AP tab, BL file to BL tab, CP file to CP tab and CSC_HOME to CSC tab
6. Hit start and wait until it is finished.
7. Reboot and you have a stock rom again
Questions about Encryption:
Q: On TWRP there is an error about /data mount, what to do?
A: Your device is encrypted, follow the steps below to get rid of your encryption.
Q: Help, I never had a code and now after installing the rom my phone asks for a password??
A: Your device is still encrypted, on step 0 of my rom instructions it tells you to be sure you're not. So, what do you need to to in case you are still encrypted.
A: HOW TO DISABLE ENCRYPTION:
1. Boot into TWRP
2. Select Wipe
3. Select format data
4. Then you manually need to type "yes" with the keyboard
5. Confirm the wipe (this will remove the encryption)
6. Reboot your recovery
Q: Is there a way to get rid of encryption which is simpler?
A: Not really, you could also wipe data with stock recovery but this is quite a big hassle so above method works better.
Q: And if I want to use this rom with encryption?
A: Normally we can use the stock kernel to encrypt our device, but since the Android 7.0 Nougat update samsung makes a check kernel sides to block deodexed roms from booting. This means that even the stock kernel is build by me to disable knox and tima. So encryption won't work there and you have to encrypt your device after you set up your phone. After that go to settings, security, encrypt device. It may need some additional steps to work...
Questions about CSC/Signal:
Q: Where has the CSC selection gone?
A: To include all csc files, the rom get way to big, so it got it's own thread now, take a look here: CSC installer
Q: I have a weak cellular signal, what can I do against it?
A: Two things: first, install your providers CSC using CSC installer and flash in TWRP or flashing stock CSC with Odin. Second Thing: You can install the modem from your provider, also find your modem on Sammobile and install it with Odin in CP tab.
Q: I don't have all sHealth features, how come?
A: Not all CSCs include this feature. I recommend to use AUT or DBT as it has the best compatibility!
Q: Can I flash MM CSC on N and vis a verse?
A: No, this is clearly not recommend! You can and will face call fc's!
Questions about Xposed:
Q: Does Xposed work yet on Android N 7.0?
A: No it does not! You will end up in a bootloop when you flash it on android N
Q: I selected xposed but now I don't see an app for it?
A: Maybe there went something wrong with installing the app to /data/app from my installer script. But xposed is actually installed only the app is missing, so head over to the download page of xposed app: Material Xposed Thread
Q: I selected xposed but the app shows not active or something else with xposed is not working.
A: This can have 2 reasons:
1. You have installed latest xposed version without installing magisk, magisk is required for most recent xposed version!
2. You used 86.2 xposed (which does not need magisk) but you did not install supersu. Since 86.2 does not use magisk to be systemless it uses supersu instead!
Questions about Magisk:
Q: How can I pass safetynet?
A: 1. Make sure to fully uninstall SuperSU by chainfire
2. Flash most recent 2.4.3 SuperStock Kernel
3. Flash Magisk V12
4. install latest Magisk Manager from playstore
5. Open Magiks Manager, go to settings
6. Enable MagiskHide, systemless hosts and systemless busybox
7. Reboot the phone and check safetynet!
Q: I got out of date binary issue?
A: Since Magisk V11.1 there is no need for phh root anymore. Everything is handled inside the MagiskManager apk!
Q: Where can I configure the root settings in Magisk?
A: Since Magisk V11.1 Magisk uses MagiskSU, you can find it in latest Magisk Manager V4.1
Questions about Snapchat:
Q: Even when I did not use xposed during my setup in rom I can't login to snapchat anymore!
A: Snapchat got updated and now detects even root access on your phone!
Q: What to do to login to snapchat then?
A: Clean install the rom without root and xposed and login to your snapchat, save the app with titanium backup, flash back xposed and root. For the next update of the rom just restore snapchat backup in TB.
Q: Any other possibility?
A: You could enable MagiskHide and check Snapchat inside it so root will be hidden from Snapchat. You will be able to perfectly login without any issues.
Q: I want to discuss this problem a bit deeper. Should I do so?
A: Do that, but this has nothing to do with this rom, so please go ahead and post your experience here on this Snapchat Thread.
Questions about Kernels:
Q: I want to switch kernel, how?
A: Since we have systemless xposed and systemless supersu, we have patches in ramdisk of boot.img. This means you have to reflash Magisk and supersu (or any other zip that changes some stuff in ramdisk partition) after every change of kernel!
Q: Synapse shows no UCI support!
A: Most comon issue is that no busybox is installed. Download the one from here: Latest busybox and flash it in recovery.
Q: I got random reboots, heeelp!
A: This is most likely from a custom kernel, if you face random reboots please check if you have the latest kernel installed or switch back to the stock kernel included in the rom.
Q: My screen is kind of yellow/orange and the touchscreen doesn't work at all!
A: You have chosen the wrong kernel in aroma selection. Reflash the rom without any wipe selecting the right kernel version.
Questions about Root:
Q: I lost root after installing this rom. What to do?
A: All mods (like supersu, phh's root, xposed and magisk) are stored in ramdisk of kernel boot.img. So if you flash this rom, and after this another kernel, simply reflash your preferred root method and it will work again!
Q: I selected phh root but my phone tells me I am not rooted!!
A: There are two possibilities:
1. You have mixed supersu/phh with magisk.
2. You did not install phhs root app from playstore.
Q: I get a warning about binary out of date. Help!
A: That happens on latest Magisk V11.1. Reason: Root has fully moved into Magisk Manager, no additional app required. Uninstall phh or supersu apps and only use magisk!
Q: I want to use su hide on my phone, how to do so?
A: Both below variants are outdated, I recommend to use Magisk with its build in MagiskHide. Check the thread: Magisk Thread
Link to phh's hidesu: Phh's thread
Link to chainfires suhide: Chainfires thread

Tkkg1994 said:
Exactly Rom is now online and ready for using
Click to expand...
Click to collapse
God bless you man!!!!! Let's get this show on the road!!
Sent from my SM-G930F using Tapatalk

Hey mate is this rom faster then stock and have better battery and is it stable

broyza said:
Hey mate is this rom faster then stock and have better battery and is it stable
Click to expand...
Click to collapse
It's definitely stable as said in the title of the thread.
Sent from my SM-G930F using Tapatalk

barondebxl said:
God bless you man!!!!! Let's get this show on the road!!
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
Finally a working S7 rom here on xda
broyza said:
Hey mate is this rom faster then stock and have better battery and is it stable
Click to expand...
Click to collapse
I think so, but I think that anyone can decide by himself. I would say: Try it mate
Stable for sure

Ok great will definitely try it now so do i have to flash bootloader and modem first them rom?

broyza said:
Ok great will definitely try it now so do i have to flash bootloader and modem first them rom?
Click to expand...
Click to collapse
I think the guide on the OP is very clear, or to which step do you have a question?

So i download that bootloader file first and flash through odlin then rom through twrp ? And will it work fine with my network?
---------- Post added at 02:47 AM ---------- Previous post was at 02:35 AM ----------
And the only problem i have is i dont have a sd card installed to move rom and stuff there ??

broyza said:
So i download that bootloader file first and flash through odlin then rom through twrp ? And will it work fine with my network?
---------- Post added at 02:47 AM ---------- Previous post was at 02:35 AM ----------
And the only problem i have is i dont have a sd card installed to move rom and stuff there ??
Click to expand...
Click to collapse
Than you put it on your phone and wipe everything except internal storage

Ok great thanks il try this now

Installed this rom and is working great no problems so far ? when you gonna make some more modern and make this even better ?

Thanks a lot for this rom. If I may suggest to add links to tweaks that are tested and working with the rom. Tweaks like dual speaker, viper, xposed and so on.
Skickat från min SM-G930F via Tapatalk

THX it's seams the rom's start to appear !
Thanks Sir

Great bloatet Rom, but Gear VR doesn't work correctly - representation does not fit.
Som few edge features would be great.

Can someone please help me?
After i installed twrp, the recovery cant mount data,
Please help

MrJiM said:
Thanks a lot for this rom. If I may suggest to add links to tweaks that are tested and working with the rom. Tweaks like dual speaker, viper, xposed and so on.
Skickat från min SM-G930F via Tapatalk
Click to expand...
Click to collapse
I will add some of those mods in my rom by default
AlphaAnimal said:
Great bloatet Rom, but Gear VR doesn't work correctly - representation does not fit.
Som few edge features would be great.
Click to expand...
Click to collapse
I will test this on my own gear vr, thanks.
weedeater84 said:
Can someone please help me?
After i installed twrp, the recovery cant mount data,
Please help
Click to expand...
Click to collapse
You have an encrypted device. You have to decrypt it first
Sent with my Nova powered SM-G901F

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Optimized LineageOS 14.1 for the Samsung Galaxy S4 (Qualcomm variants)
Brought to you by the Jflte DevConnection Team​
Code:
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
JDCTeam
Diego Monaco - @alucard_24
Dimitris Katikaridis - @side
Franck Rohée - @franzyroy
Ray Daley - @gadget!
Jim Silverlock - @Jimsilver73
Marco Zanin - @-+BB+-
Matthew Booth - @MattBooth
Mattia D'Alleva - @AntaresOne
Mike Atkins - @FernBch
Oliver - @angelcalibur
Paul Harris - @hawkerpaul
Paul Keith - @javelinanddart
Simeon Ivanov - @smstiv
Stefano Meroni - @smeroni68
Yannis Menexes - @SkL*
FEATURES
Faster than a rocket!
Based on LineageOS 14.1 - Android 7.1 Nougat
F2FS support
Improved speed, stability, RAM usage & battery drain
LEDify by JDCTeam - choose your favorite notification LED pattern at device's boot!
Toolbox by JDCTeam - the all-in-one device manager
Powered by Alucard kernel
All Galaxy S4 variants with Qualcomm Snapdragon 600 are supported:
GT-I9505
GT-I9505G
GT-I9507
GT-I9508
SCH-I545
SCH-R970
SGH-I337
SGH-M919
SPH-L720
SGH-S970G
SM-S975L
Many, many more! Install and see yourself!
All Variants with a locked bootloader are currently unavailable until the unified tree is further updated.
GT-I9515 is not supported (slighty different hardware)
GT-I9500 is not supported (completely different hardware)
AT&T USERS: since your bootloader is locked, you must be on the UCUAMDB or UCUAMDL bootloader.
VERIZON USERS: since your bootloader is locked, you must be on the VRUAMDK bootloader.
Do 'getprop ro.bootloader' in Terminal Emulator or through ADB shell to find out which bootloader you have.
DOWNLOAD
Optimized-LineageOS-14.1 at AndroidFileHost: [HERE]
Official TWRP Recovery v3.1.0-0 for jfltexx: [HERE]
INSTALLATION
If you are coming from any previous Optimized LineageOS 13/14 version or any other ROM, please do a clean install!
FULL WIPE (with external microsd card)
Move any files you want to keep to your External MicroSD Card – ! Or you will lose them !
Download your Optimized LineageOS Rom and GApps Package
Move your Optimized LineageOS Rom and GApps Package to the external microsd storage
Boot into Recovery Mode (Hold volume up, Home, and Power button for 1 second after the vibrate)
Wipe > Advanced Wipe > Select On (Enable tick) for Dalvik / Art Cache, System, Data, Internal Storage, Cache
Swipe to Wipe at Bottom of Screen
Back to Main start screen
Wipe > Format Data
Type ‘Yes’ and press blue checkmark at the bottom-right corner
Back to Main Start Screen Install to Rom and Gapps
After you have finished installing the Rom and GApps > Wipe Cache/Dalvik > Swipe to Wipe
Reboot System! Enjoy!
FULL WIPE (without external microsd card with NO Home PC access)
Move any files you want to keep to a safe folder - ! Or you will lose them !
Download your Optimized LineageOS Rom and GApps Package
Move your Optimized LineageOS Rom and GApps Package to the internal storage
Boot into Recovery Mode (Hold volume up, Home, and Power button for 1 second after the vibrate)
Wipe > Advanced Wipe > Select On (Enable tick) for Dalvik / Art Cache, System, Data, Cache
Swipe to Wipe at Bottom of Screen
Back to Main start screen
Wipe > Format Data
Type ‘Yes’ and press blue checkmark at the bottom-right corner
Back to Main Start Screen Install to Rom and Gapps
After you have finished installing the Rom and GApps > Wipe Cache/Dalvik > Swipe to Wipe
Reboot System! Enjoy!
FULL WIPE (without external microsd card with Home PC access)
Move any files you want to keep to your Home PC - ! Or you will lose them !
Download your Optimized LineageOS Rom and GApps Package
Move your Optimized LineageOS Rom and GApps Package to the internal storage
Boot into Recovery Mode (Hold volume up, Home, and Power button for 1 second after the vibrate)
Wipe > Advanced Wipe > Select On (Enable tick) for Dalvik / Art Cache, System, Data, Internal Storage, Cache
Swipe to Wipe at Bottom of Screen
Back to Main start screen
Wipe > Format Data
Type ‘Yes’ and press blue checkmark at the bottom-right corner
Back to Main Start Screen Install to Rom and Gapps
After you have finished installing the Rom and GApps > Wipe Cache/Dalvik > Swipe to Wipe
Reboot System! Enjoy!
Once first boot is completed you can safely move your files back onto your Internal Storage
NOTICE: First boot after an install/update takes a while, wait at least 5 minutes for it to boot.
If the LED stops flashing and goes solid with any color then SuperSU did not correctly trigger the reboot.. You can either pull the battery -OR- hold down the power button for 15 seconds till the led/screen goes blank, then let go of the power button.. Then after another 4 seconds it will automatically boot and vibrate and everything is 100% normal.. It only happens that one time on a new Rom install with SuperSU.​-----------------------------------------------------------------------------------------------------------------------------------------------
AROMA-BOOTANIMATION -- By Creeper36
(Does Not Contain the Rom)
This is an Aroma installer if you want to change your BootAnimations.
This is a completely seperate and optional Aroma from the Rom installer.
I created this to give you the option of easily changing your BootAnimations.
Take a look at the Previews below and I will be creating more of these and will continue to update it.
ANIMATION PREVIEWS:
(Note: Quality may be reduced for Preview GIFs.. Final version is flawless)
ZOMBIE
OPT LINEAGE
OREO
PIXEL WHITE
PIXEL BLACK
BIOS
S ENERGY
BLUE STREAKS
HEART
WATCH DOGS
New Aroma-BootAnimations-v.1.0 >> https://www.androidfilehost.com/?w=files&flid=178732
-----------------------------------------------------------------------------------------------------------------------------------------------
SOURCES
Available on:
JDCTeam GitHub​
CREDITS
Side - Lead developer
JDCTeam
LineageOS
OpenGApps
SPECIAL THANKS
Optimized-LineageOS-14.1 Test Team
Donators
AndroidFileHost
All of you!
XDA:DevDB Information
Android 7.1.2 | Optimized LineageOS 14.1 builds, ROM for the Samsung Galaxy S4
Contributors
side, creeper36, smeroni68, alucard_24, -+BB+-, MattBooth, hawkerpaul, angelcalibur, Jimsilver73, javelinanddart, franzyroy,SkL*, smstiv, FernBch
ROM OS Version: 7.x Nougat
Version Information
Status: Testing
Created 2016-10-13
Last Updated 2019-01-20

Update is out
Version 11
20180320 / (20-Mar-2018)
MD5 for aroma build - a71b6dc9f08064ceb067f7f3363dac3d
MD5 for non-aroma build - c92a40be0de17975999df738e276b948
Changelog
Upstream merge until 19-March-2018
Update stock kernel to 19-March-2018
Updated Alucard kernel and Ramdisk
Reset Alucard kernel to version 8 source
Update security patch to March
BT edits
Google Apps related edit from upstream
Aroma: Do not delete Stock Dialer if Google Dialer is selected
Update magisk
Update mixplorer
Introduce Spectrum implementation
Fix the proximity sensor (That time for real
Resize user data partition to allow crypto work
Update our wallpaper
Update stock kernel
Update aosp and Snap camera
Update our flashables
old changelogs:
Version 10
20171020 / (20-Mar-2018)
Upstream merge until 3-Jan-2018
Update stock kernel to 3-Jan-2018
Updated Alucard kernel and Ramdisk
Minor edits here and there and some clean up
Version 10 wallpaper
Speed up some things around, like animations
Implement SideCore kernel to aroma
Update Stock camera
Update our flashables
Version 9
20171020 / (20-Oct-2017)
MD5 for aroma build - 37e9b19dc975aa5263ed3d47b19d228d
MD5 for non-aroma build - 6b39a9de65cef4395cbb4ce04af4fd64
Upstream merge until 12-Dec-2017
Update stock kernel to 12-Dec-2017
Updated Alucard kernel and Ramdisk
Update to _r36 revision
Minor edits here and there and some clean up
Update mixplorer app
Add runtime themer (Settings->Display->Theme
Version9 wallpaper
propush the dex even more
Add 4G/LTE switch at tweaks section
SystemUI:Set recents taskbar delay to 0
config:Enable lockscreen rotation(Display/Rotation
Version 8
20171020 / (20-Oct-2017)
MD5 for aroma build - ff5bad8283fc608c7f324b15b8bfaffd
MD5 for non-aroma build - 94d11e511f8a3f0abc8054a6af74bbfe
Update stock kernel to 19-Oct-2017
Updated kernel
Fix a known BlueTooth bug
October security patches
Updated ramdisk
Completely resize partitions
Update aroma packages
Stable 8 wallpaper
Update our flashables
Add burnIn option
BT Audio edits from upstream
Add CMSettings package to power_off_alarm_apps
Enable variable button brightness
aroma:Add SamsungOne fonts
aroma:Add Pixel2 Contacts/Dialer/Messages
Please READ THE DESCRIPTION AT AROMA
Version 7b
20170916 / (16/17-September-2017)
MD5 for aroma build - 25c0d82a9cc8d504df0f0b94fe05d1af
MD5 for non-aroma build - 01e4c8e3a7f01efea943e37601c07d93
Upstream merge until 16-Sep-2017
Update stock kernel to 16-Sep-2017
September security patches
Updated Ramdisk
20170906 / (6-September-2017)
MD5 for aroma build - 8873d4ec9ee4a63954ad69dd3fead255
MD5 for non-aroma build - 8245c1281cb0c6146106cbae976b3418
Changelog:
Upstream merge until 6-Sep-2017
Update stock kernel to 6-Sep-2017
Version 7 wallpaper
Updated Alucard kernel
Updated Linaro ToolChain for Alucard
init:Sprint edits from LineageOS
Fix BT audio stream for car sets and headsets
Overlay:Set config_deviceHardwareKeys to 83
Revert "Overlays: capacitive keys: light up only when pressed."
Update Pixel Launcher to rootless 2.1
Allow to ignore presentation indicator of outgoing calls
GPS:Set XTRA version check to AUTO
Update mixplorer.apk 24/08/2017
Revert "system.prop:debug.hwui.use_buffer_age=false"
prop:Boost dex2oat process
Build bionic with O3 flags
Updated webview
20170816 / (16-August-2017)
MD5 for aroma build - dbbe359729941cd5f3b38501b0bec59a
MD5 for non-aroma build - e4c886ff43cfcdecaf548b7c6b0b1ef8
Changelog:
Upstream merge until 15-August-2017
Update stock kernel to 15-August-2017
Stable 6 wallpaper
Update to _r29
PhoneToggler: Update preferred network mode setting
Update Alucard kernel
More Sprint variant edits on signal
Build Alucard with 7.1.1 Linaro TC
device:capacitive keys: light up only when pressed
device:animate screen lights
Doze: Use pure Samsungs app
Pin camera app in memory for faster executions
Allow GMS power saving
Hack to make YouTube 4K videos work
aroma:Update Magisk to 13.3
Enable "Panic Detection" mode
Aroma:Fix an unexpected format on removing option
ramdisk-tweaks/cortexbrain:make script less aggresive
Kernel: Default profile:Enable power_efficiency_workqueue
All profiles:Slightly reduce voltages
default/battery/exbattery profiles:Set maxcoreslimit_sleep=1
APNs:Add freedomLTE
Bluetooth:Fix car audio (?)
Pure CAF Gallery
Update our flashables
More SafetyNet patches
Reduce DEFAULT_MIN_BOOST_FREQ at alucard kernel
debug.hwui.use_buffer_age=false Affects display updates
Fix a Sprint connections property overwrite
Speed up PlayStore installations
Enable GLONASS (?)
Add some stock system prop flags
HDR workaround.Works?i see no difference
Modify 480p profile
20170711 / (11-July-2017)
MD5 for aroma build - dbbe359729941cd5f3b38501b0bec59a
MD5 for non-aroma build - e4c886ff43cfcdecaf548b7c6b0b1ef8
Upstream merge until 9-July-2017
Update stock kernel to 9-July-2017
Update to revision 24
SuperSU to 2.82
Core edits from upstream
Ramdisk edits
art: switch to -O3 completely
Kernel optimized ToolChain edits
default.prop:Enable MTP by default
Update alucard kernel
Custom scrolling values at OptCM Settings
Add more sensitive apns
Remove decay time hack
Update Magisk
Updated wallpaper
CarrierConfig overlay.affects data connections
Even more bt edits
Switch to chromium patched webview
Update aroma packages
Update flashables from optcm settings
bdroid_buildcfg:enable BTM_WBS_INCLUDED
bluetooth:vnd_jf: Do not set SCO_WBS_SAMPLE_RATE
Changelog:
20170605 / (07-June-2017)
MD5 for aroma build - d16bbe2a05a642d1b5b3b4ade3931356
MD5 for non-aroma build - 5137ea26182f651e281c669da8680ca9
Upstream merge until 3-June-2017
Update stock kernel to 3-June-2017
Update to _r17 android 7.1.2
Update builder PC to java9
Remove SDCARDfs again
Fix tethering on some devices
Reenabled logcat-no qmuxd drain
Use S8s sounds (Notifications/UI/ringtones)
Use S8 wallpaper
Remove some ugly sounds from stock
SettingsProvider:Always allow non-play store apps installations
aroma:Split aroma to 2 pieces (Install/Remove sections
proc: Remove additional SafetyNet flags from /proc/cmdline
Allow apps to read statistics from /proc/stat
Big kernel changes affecting sot and heat
Webview:always use the latest beta version
Fixes on pegasusq and hyper governors
Support two themes for aroma
Back to default bootanimation
Back to 450mhz max gpu-less heat
Revert some audio flags
Enable wifi on first boot
Remove old IR driver
Set freeze timeout to 2 seconds
Debouncing of the light sensor
Disable Dreams by default
Double tap to lock screen to sleep option
Enable power save config for system apps too.Select your apps
Updates on Substratum core
20170507 / (07-May-2017)
MD5 for aroma build - 0204933401f84706ababb6d9a216d070
MD5 for non-aroma build - 617222b57f22ba0834173145d00f7236
Upstream merge until 7-may-2017
Update stock kernel
Updated Alucard kernel
Remerge 7.1.2 to avoid issues
Update to r8
Stable3 Wallpaper
STweaks profiles edits
Add the new HealthD flag to device tree
jflte: turn off carrier provisioning and allow tethering for everyone
Dex2oat speed edits
Edits on audio
Updated default bootanimation
Aroma installer buttons, icons, and colors change
system.prop:Enable use.voice.path.for.pcm.voip
Quick unlock on lockscreen password
Edits on ramdisk affecting battery life
Stweaks:New variable about mediaserver killer
STweaks:Allow user to select other IO while sleeping
CameraWrapper:Increase camera open retries
Add ldjcdo to test team/Remove SkL
Add hyper,pegasusq and slim CPU governors
Wifi Edits from upstream
SystemUI: Use AOSP AutoBrightness implementation
GsmCdmaPhone: Fix GSM SIM card ICCID on NV sub CDMA devices
Speedup the dex2oat operation
Edit on BlueTooth HPF overlay
Truly enable sdcardfs
(IF YOU HAVE ISSUES REMOVE THE ro.sys.sdcardfs=true FROM YOUR /system/build.prop AND REBOOT)
Enable and tweak KSM
Update our flashables
Update aroma-installed packages
Update WebView
Support Custom QS rows/columns
QS Tile which support partial screenshot
GPU MAXIMUM FREQUENCY IS SET TO 200Mhz.Change it if you want from STweaks
Drop stock browser.Use Jelly
prop:set persist.bluetooth.disableabsvol=false
profiles:Fix camera and headset mic volumes
Introduce Aroma-BootAnimations.See it at Optimized LineageOS Settings
Revert "telephony:Hack GSM and LTE signal strength
post-init:Speedup the profiles loading after boot
Update backuptool scripts(Dirty installations are even stabler)
Settings:Add changelog tile(About phone section)
20170413 / (13-April-2017)
MD5 for aroma build - daa09690b2ea350a3cd75d1b98e9708f
MD5 for non-aroma build - 8816663fddf8c97e73ecdaa2a0f335ef
Upstream merge until 12-April
Update stock kernel to 11 April
Update to 7.1.2
Stable2 Wallpaper
Kernel:Enforce kernel to read users edits
Kernel:Huge updates regarding battery life
Readd Logger switch.Default: OFF.REBOOT WHEN CHANGED.(Stweaks/OTHER/Logger)
Kill mediaserver on boot
system.prop: Disable 2 audio-voip flags.Fixes some VOIP apps
Recalculate the lights values
Add HPF bt profile
Reorganize the contributors list
Fix panorama mode on Snap camera
Enable night mode.New QS Tile
Edits on lockscreen's charging message
aroma:Allow user to select Magisk
Faster boot speed
Faster reboot to recovery
Edits on doze
Add lekiaM to contributors
Allow user to select different LED color when device is fully charged
Add some extra infos on some STweaks menus
Edits on Gapps killer
Update ThemeInterfacer
Get latest Substratum commits
Bypass SafetyNet check
Updated ramdisk scripts for Magisk root
Fixed CVE-2017-0583
Show USB mode dialog when USB is inserted
BatteryStatsService:Stop logcat spam about modem
CPU usage overlay:Relocate it,make its interval faster,remove temperature
telephony:Hack GSM and LTE signal strength
Timezone bug is now fixed(Partially?)
Reduce reboot delay by 4 seconds
Edits on LTE tile
Still doesnt work,for a strange reason.to make it work
From Settings use 3g as prefered network
Now the QS tile should be disabled.
It now works
Speed up the UI feeling without affect the animation speeds
Remove the icon from 'Clean all' tweaks
Update Webview
Remove Soft Reboot option
Details here:https://github.com/JDCTeam/android_...mmit/86306fb5df2cdb7932b51a0dbe88b096cb7ac913
Advanced reboot is automatically enabled when you enable dev options
Support microG Gapps by supporting fake signature spoofing
20170120 / (13-February-2017)
MD5 for aroma build - 8198edab63f3e45d81e26773903a7930
MD5 for non-aroma build - 0073655d738380181050645e7771898a
Upstream merge until 13-Feb-2016
Update stock kernel to 13-Feb-2016
Fixes on cellular issues.Affects Sprint variants
Fix device behavior when lid case exist
Overlay:Add some BT profiles
Keep WiFi on during sleep by default
Set backKill time to 250ms
kernel: Disable CPUSET code
system.prop:Enable quick power on
system.prop:Set delay of ringing while calling to 0
fix f2fs for alucard kernel when using SuperSU
[Test]PermissionGrant: added missing permission for gapps
sepolicy: Fix denials after restore of ROM backup
OMS updates
Removed HexoLibre.RIP Theme Engine
Substratum does NOT come with ROM.Please get it from PlayStore
Use 4 cores while installing apps
Updated flashables and aroma packages
Updated webview
Some camera stability edits(Placebo?You tell me)
Fix a buggy situation while Lid case cause freeze
Edited icon when no recents apps,at recents panel
Do not show clear icon when no recent apps
Edited sound steps
Long press Power to activate Torch
Vibrate when connecting or disconnecting a power source
20170120 / (20-January-2017)
MD5 for aroma build - 4caf50d8ec345e25815c30c5210539fe
MD5 for non-aroma build - 08cd79f2277580ab639057849333e5ca
Upstream merge until 20-Jan-2016
Update stock kernel to 20-Jan-2016
LineageOS
Revision r9
Reconstruct the way that ROM is provided
Kernel and ramdisk big updates
STweaks is updated
Refresh Snap preview after photo shoot
Edits on Doze
Substratum support
Edit SMS Limit and restrictions
Wallpaper
Several device edits(affects partitions)
Updated Snap camera
Completely remove CMStats and its drain
Stop some logcat spams
Disable LiveDisplay by default
SuperSU to 2.79 SR3
Give persistent SU access to system apps
Fix WiFi Hotspot
Enable Google Assistant
Add an advanced Google Play Services killer(Default) 'Stweaks/OTHER tab"
SystemUI:Remove 'x' sign from signal icon
Update Wallpaper app
Update ES file manager app
Updated bootanimation
Updated WebView
Add ability to download flashables from Opt-LineageOS menu
Give the proper permissions to your browser
Many transitions from CM to LineageOS
Fix SuperSU related logcat spam
Add membar to OptLineage tweaks
Set back button kill timeout to 500ms
Increase timeout to compile GMS core
Add ability to restrict app data/wifi usage
LineageOS official bootanimation
Add CPU info overlay at developer options
Add mattgyver to Test Team
bluetooth:Allow HFP protocol
Edit Straight Talk APN
Enable Blur feature
Add unlink volumes feature
Some notes about the new build....
F2FS is known to cause issues when we use SuperSU.I hardly suggest to use ext4 for all partitions
On the first boot u may have some browser and music FCs...not constantly though.Select the option to mute the notification until next reboot.
So ,give all the permissions to those apps and reboot when u setup ur device
On the next reboot you wont have such issues.
The folder link contains 2 ZIP files.1 is the aroma 1 is the NON aroma build for those who got issues with it.
Non-aroma build contains :
Alucard kernel
CM File manager
No Nexus apps
No SuperSU
AOSP camera only
Optimized LineageOS settings has got options to download all the aroma installer packages.To do that ,simply click on the desired package.
To make this work,u must have already give the proper permissions to your browser.You can download any package ,even if you installed aroma zip
Dont you want to make a fully clean install ? no problem.BUT.keep in mind that dirty install will keep ur old kernel changes even i made changes to kernel.
So
if u really want to make a dirty install and keep your kernel settings,simply flash the zip over the old one.(optional:delete system and dalvik before that )
if u really want to make a dirty install with the new kernel settings,delete the folder /data/.b--b/ from twrps file manager and then flash the rom as situation 1)
The late reboot time is a known issue on s4 with nougat roms.
Changelog:
20161224 / (24-December-2016)
MD5- 5484ab6d746c2bc8601b5172d01f5d69
---------------------------------------------------
Upstream merge until 24-dec-2016
Update stock kernel to 24-dec-2016
Settings apk:Back to stock colors
APN changes
Kernel and ramdisk changes
RIL/Network changes from upstream
Changed wallpaper
Updated SuperSU to 2.79 SR1
Fix SElinux switch at STweaks
Disabled SDCARDfs again
No scrolling cache-I need smoothness.not speed
Always show battery percentage when charging
Increase sms limit
Removed Gello app
20161210 / (10-December-2016)
MD5- 0db973ada05a5c3800194e8f5308ac64
Upstream merge until 9-dec-2016
Update stock kernel to 9-dec-2016
Update to Android 7.1.1_r4
Ramdisk and profiles updates
Kernel updates
F2FS and sdcard edits
Supersu:Update to v2.78-SR5
STweaks:do not dex preopt
Update ril-service daemon
Add Recents Panel tweaks from OptCM13
New wallpaper
Brand new Snap camera
-Still buggy.Its not ROMs issue.Snap camera is
under development.USE IT AT YOUR OWN RISK!!!
Bugs:
HDR not working.Its N issue.not Snap.wont work
with any app
1 shot with back camera
= freeze of camera preview.
App does NOT freeze.Camera preview DOES.
solution:
Switch to front camera,and back again
OR
press home button to minimize and run it
again to be back
Add OptCM13s camera wrapper
Resetting proximity sensor on every ROM flash
Replace charging string on keyguard(Help me translate
Improve scrolling cache
Speed up background transitions
Add LTE tile(Works but not visible to Settings app
Hold click to get in Network preference menu
Add Sound tile
Add Switch to disable/enable wake on plug
More edits affecting dirty installations
Change the base main color of ROM
Settings icon has got our custom color
Fix circle battery icon
Fix network switch(Preferred network type
Turn off some default CM display features
Implement press home to answer call
Remove STweaks and SuperSU from JDCSettings if not installed
Settings:LED capabilities
Aroma
Add Nexus Launcher & Wallpaper capability
Also clean on installing:
-/sdcard/Android
-/sdcard/DCIM/.thumbnails
-/sdcard/LOST.DIR
Add Camera selection capability
Add file manager selection capability
Fully edited UI
20161121 / (21-November-2016)
MD5- aa8fc17391deed6b3cf8a8b83b5578fb
Big upstream until 21-nov-2016
Stock kernel updated kernel until 21-nov-2016
Alucard kernel updated
Ramdisk changes
Wallpaper changed
Add contributors to Settings/About phone
Remove CM updater
Add S7's UI touch/unlock/lock sounds
Battery save color is now light gray
Disable tap2wake by default(Not supported by kernel)
Disable captive portal by default
Force fast UI experience
Remove useless CM's features
Add JDCTeam's custom scripts(eMMC Trim,LEDify)
Add Samsung's stock notification/alarm sounds from lollipop
Remove snap camera/use aosp one
Edits on camera.(Video recording is partially working)
Edits on ramdisk that affects charging
Fix f2fs
Allow dirty installations(A custom script ensures /system wipe)
Introduce JDCSettings Settings section
Build with -O3 flag on clang
Expose ROM's name at ABOUT PHONE section
Storage manager is enabled by default
Add Google Assistant property
Updates on blobs/graphics
Default STweaks theme is Sammy one
Fix unified tree(All device are now supported!)
20161013 / (13-October-2016)
MD5- dontcare
Initial test release

OptCM13/14 Test Team
@Creeper36
@Chibbo
@-Deco-
@Feedmeeeee
@Pwnycorn
@sjamie
@mattgyver
@lekiaM
JDCTeam's members
Do you have plenty of time and android knowledge?Drop me a PM.i may need you to my team
OptCM Slack channel is closed due to inactivity.Seems like that people prefer an already-chewed food to eat than,cook it.

Many thanks for your generous donations !
All donators are welcome to join the optcm test team and / or get access to beta versions built every couple of days, PM me for details.
Differences compared to nightly so far
JDCToolbox
ROM built with Linaro toolchain
Stock kernel built with Linaro toolchain
Custom Setup Wizard
faster transitions
Unified tree(didnt test CDMA.please report me back)
Custom boot animation
Holding home button presents recents menu
Odexed
Aroma installer
Alucard kernel
STweaks
Some tweaks out of lineageOS
Enable logcat on stock kernel
Code:
adb shell
su
start logd
exit
adb logcat > mylog.txt
Google assistant guide
by @Apad121
thanks for that mate
Apad121 said:
Hi everyone
Just wanted to say that I got Google Assistant working on this ROM and it seems fast to work really well!
BTW the bug above happens to all devices that aren't pixel or nexus.
THE BUG WITH OK GOOGLE IS WORKING NOW..... SEE BELOW IN STEP 9:
GUIDE ---- I had to find lots of articles and looked through many guides because CM14.1 was slightly different to CM14 and android nougat. Because of how we flashed different Gapps it made the installation quite difficult. However after a bit of problem solving and determination I succeeded in getting Google Assistant on this great ROM.
1 Go to build.prop (I just used BuildProp Editor from the Play store, once in the app I pressed the edit button on the top right)
2 I changed "ro.product.name=cm_jflte" to "ro.product.name=Pixel XL" (I am not convinced this is neccassary but I did it anyway and it works)
3 Add "ro.product.model=Pixel XL" at the bottom (the ROM didn't have the ro.product.model bit that most phones seem to have...)
4 Add ro.opa.eligible_device=true after the above (Add this underneath the 3rd step)
5 Save the build prop then Reboot phone (Almost there)
6 Clear Google app data (This is to help ensure the process works)
7 Launch Google assistant as if you would launch now on tap so go to settings>functions> select home button >long press >select search assistant (OR SET IT TO ANY OTHER BUTTON YOU WANT)
8 Go to Google app settings and check you have enabled Google assistant
9Install the application and setup (credit to @masterchop for making this app ) ChopAssistant https://play.google.com/store/apps/details?id=choplabalagun.blogspot.com.chopassistant&hl=en
10 FINISHED! :laugh: (Please read the rest below)
IF IT STILL DOESN'T WORK DO NOT WORRY ---- IF YOU FLASHED A SMALL GAPPS SUCH AS PICO GAPPS THEN THERE IS STILL 1 MORE STEP!!!
11 Now if you had to install the google app when you first setup the phone, then you need to move the file "com.google.android.googlequicksearchbox-1" from data/app to system/priv-app
Google Assistant for CM14.1, this guide covers most errors and problems you will face for installing it on any device including CM14 and Android 7.x
Reboot and NOW GOOGLE ASSISTANT should work with "OK Google" working too!
PLEASE LEAVE A LIKE IF THIS HELPED! :laugh:
Click to expand...
Click to collapse

Hehe! Jdc did it again!

Today is a good day ?
Enviado desde mi GT-I9505 mediante Tapatalk

angelcalibur said:
Hehe! Jdc did it again!
Click to expand...
Click to collapse
thaaaaaaats true mate

Where is the download link? It says its on drive but I don't see a link? ?
Sent from my SGH-M919 using Tapatalk

It's Awsome thank you

Xplorer4x4 said:
Where is the download link? It says its on drive but I don't see a link? ?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Try again.my fault.thanks!

Downlaoding

Wow, huge deal, thanks JDCTeam! Very excited to have this on my phone!
----Sent from my phone----

For who have installed the rom: wich gapps are you using ? Thanks :cyclops:

AlfaTeam Corporation said:
For who have installed the rom: wich gapps are you using ? Thanks :cyclops:
Click to expand...
Click to collapse
Please use the suggested package which is OpenGapps.read first post

I'm trying to download but it never downloads successfully. Can you use a different host maybe?
Sent from my SGH-M919 using Tapatalk

Xplorer4x4 said:
I'm trying to download but it never downloads successfully. Can you use a different host maybe?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
not now.i have made 20gb upload today

side said:
Please use the suggested package which is OpenGapps.read first post
Click to expand...
Click to collapse
Okay, thanks The Galaxy S4 i9505 is ARM64 ?

AlfaTeam Corporation said:
Okay, thanks The Galaxy S4 i9505 is ARM64 ?
Click to expand...
Click to collapse
ΑRM

AlfaTeam Corporation said:
Okay, thanks The Galaxy S4 i9505 is ARM64 ?
Click to expand...
Click to collapse
No just arm
Sent from my SGH-M919 using Tapatalk
---------- Post added at 03:18 PM ---------- Previous post was at 03:14 PM ----------
Can any one upload this to a mirror?
Sent from my SGH-M919 using Tapatalk

Based on CyanogenMod 13.0 - Android 6.0.1 Marshmallow
Click to expand...
Click to collapse

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Evolution X 7.2 for the Asus Zenfone 5Z [Z01R]
Code:
/*
* Your warranty is void. Or valid, probably?
*
* I am not responsible for bricked devices, dead SD cards, Ebolation X,
* thermonuclear war, or the current economic crisis caused by you following
* these directions. YOU are choosing to make these modificiations, and if
* you point your finger at me for messing up your device, I will LMAO at you.
*/
Living, Breaking, Keep Evolving.
Pixel UI, customization and more, we are Evolution X!
- Team Evolution X -
@joeyhuab
@peaktogoo (Now RealAkito)
Reach us on Twitter! @EvolutionXROM
What are our features?
- Just flash and check "The Evolver"
- Report in comments if you find any
DO NOT FLASH GAPPS, ALREADY INCLUDED
First Time Install / Clean Flash
1. Reboot to Recovery
2. Download the proper ZIP for your device
3. Wipe Data/Cache/System when coming from non-AOSP ROMs
4. Flash the ROM and TWRP.
5. Reboot to System and #KeepEvolving
Update / Dirty Flash
1. Reboot to Recovery
2. Download the proper ZIP for your device
3. Flash the ROM and TWRP
4. Reboot to System and #KeepEvolving
Light Screenshots / Dark Screenshots / Download
Donate to me! / Official Chat / Device Support
Android OS version: 13.0.0_r11
Security patch level: October 2022
Build author: Aryan Arora
Source code: Evolution-X
Kernel Source code: Kernel
ROM Developer: joeyhuab

Downloads
Official Download Link: https://sourceforge.net/projects/evolution-x/files/Z01R
For guide on how to flash, make use of the following guides:
Rohan's Guide
My Guide
Screenshots have been attached below and in the op.

11th October 2019
1. Initial Ten build.
2. Kernel upstreamed to 4.9.196
27th November 2019
1. Right side notch fix (credits @Rohan purohit)
2. Version bumped to Evo 3.3
3. November security patch.
5th December 2019
1. Update Evo version from 3.3 Wicked to 3.4 Storm.
2. December security patch.
17th December 2019
1. Bump version to 3.5 Wonderland.
2. Add user selectable VoLTE icons
3. Force show date and weather info on lock screen.
And much more…
25th December 2019
1. Upstream kernel version to 4.9.206 (credits: Kailash and @G.S.T)
2. Added asus cam pre-built (credits @Rohan purohit)
13th January 2020
1. January Security patch.
2. Apex supported (Google play security updates enabled)
3. Asus Gallery included (had to remove Google voice recorder, can be installed via play store anyways)
4. Bumped version to Evo 4.0
5. Tons of ROM side changes.
18th January 2020
-Fix Notch Hide(thanks Rohan and GST)
-Start using vendor overlay
-configure vsync event phase offsets
-enable notcutout overlay
-add tweaked init.qcom.post_boot.sh and define contexts
-build powerhal to vendor overlay
-enable UXE in perfconfigstore
-BoardConfig:switch to cortex a-75 CPU_VARIANT
(Credit: GST)
Update 24th February 2020
* Feb Patch.
* Upstream kernel to 4.9.214 (Kailash's Kernel)
* Improve notch.
* Tons of source side changes
Update 4th March 2020
* March Patch.
* Switched to stock kernel 4.9.206
* Evo version bumped to 4.1.69
* Better notch.
Update 14th March 2020
- Fix slow app opening times
- Re-enable apex
- Bring back older vibration pattern
Update 31st March 2020
- Smart Charging Test
- Latest Source
- Upstream stock kernel to 4.9.216
Update 8th April 2020
- Update to Coral's Apr 2020 build fingerprint
- Version bumped to 4.20
- Touchscreen gestures now work
- Use gcc 9.3 to build kernel
- SHRP prebuilt instead of TWRP
- April patch.
- Face unlock and gradients introduced.
Update 1st May 2020
- Re-enable Asus Doze and Pocketmode (Display > Lockscreen > Advanced Settings)
- Added aptx overlay (by Rohan)
- Add pixel offline charging animation (beta)
- Enable wifi_ext
- Move to Derpfest kernel 4.9.220 (by Kailash)
- Removed Smart Charging (didn't work anyway)
- Nuked Snap Cam
Update 20th May 2020
- Introduce Asus Settings (multi vibrations support, log tile and fps overlay tile)
- Add SIM disable toggle
- Fixed touch gestures
- Nuked Asus Cam and Gallery (available as Magisk Module)
- Kernel upstreamed to 4.9.223 (By Kailash)
Update 19th June 2020
- Fix WFD (by Jackeagle).
- Upstream kernel to 4.9.227 (by Kailash).
- Updated to latest touchscreen drivers from 87 update (by Kailash)(should improve gaming).
- Improve face unlock.
Update 18th July 2020
- Add more touchgestures
- Kernel upstreamed to 4.9.230 (by Kailash) and built using gcc 10
- Enable Zygote Preforking (makes app launch faster)
- Add lottie animation in DeviceSettings
- TWRP 3.4 is now prebuilt.
Update 17th August 2020
- Add support for battery health
- Introduce Doze menu in Asus Settings
- Upstream kernel to 4.9.232 (by Kailash)
Update 19th December 2020
- Initial A11 release
- Fixed Bluetooth Audio
- Added Notch Hide (in Developer Options)
- Added DeviceSettings from Android 10
- Add support for battery health
- Upstream kernel to 4.9.247 (by Kailash)
Update 25th January 2021
- Enabled NFC
- Added Touchgestures
- Fixed Notification LED
- Updated kernel to the latest CAF Tag (4.9.227) (by Kailash)
- Minor fixes to improve stability
Update 28th February 2021
- Fix APEX (Google Play Security Update)
- Fixed OK Google Detection
- CTS now passes even if unrooted
- Added Glove Mode ('Increase Touch Sensitivity' in Display Settings)
- Merge latest CAF Tag into kernel (4.9.227) (LA.UM.9.3.r1-01000-sdm845.0)
Update 14th March 2021
- Fixed Biometric Authentication for all apps (by adeveloper79)
- [TEST] ldac audio support for compatible headsets
Update 12th June 2021
- Based on newer LOS based trees and vendor (by Marc)
- Support encryption and enforcing
- Fixed WFD
- Fixed the camera crash bug in some apps
- Nuked NFC till it's fully fixed
- Slightly faster app opening times
- Bring back snap cam
- Hid magisk better (more banking apps should work now)
Update 21st August 2021
- Fixed NFC
- Fixed Google Play System Update and FPS Info for enforcing builds
- Better Deep Sleep
- Upstreamed kernel to 4.9.273 (by Kailash)
- Misc stability fixes
Update 21st December 2021
- Initial Release based on Android 12
- Implemented Signed Build
- Added padding so clock doesn't cutout
- Upstream kernel to 4.9.292 (by Kailash)

There is no evolutionX customisation option in settings.
There is no evolutionX customisation option in settings.

MR.SHEKHARROY said:
There is no evolutionX customisation option in settings.
Click to expand...
Click to collapse
This is just the initial release build, features will be added in later builds.

i think this update messed up my phone because i cant flash any custom rom now. im just getting (ErrorCode:KPostinstallRunnerError) updater process ended with ERROR: 1

idk_anymore said:
i think this update messed up my phone because i cant flash any custom rom now. im just getting (ErrorCode:KPostinstallRunnerError) updater process ended with ERROR: 1
Click to expand...
Click to collapse
That error comes when you don't wipe correctly. Follow the guide correctly and you should be good to go.

AryanAA said:
That error comes when you don't wipe correctly. Follow the guide correctly and you should be good to go.
Click to expand...
Click to collapse
i did wipe dalvik cache, data and system but its not working

idk_anymore said:
i did wipe dalvik cache, data and system but its not working
Click to expand...
Click to collapse
Can you elaborate the exact process you followed?

AryanAA said:
Can you elaborate the exact process you followed?
Click to expand...
Click to collapse
1. I change slot to my inacctive slot
2. installed twrp and went into recovery
3. change back to the first slot and wiped data, dalvik and system
4. installed disable force encryption on both slots
5. tried to install the rom on the first slot and sencond slot

idk_anymore said:
1. I change slot to my inacctive slot
2. installed twrp and went into recovery
3. change back to the first slot and wiped data, dalvik and system
4. installed disable force encryption on both slots
5. tried to install the rom on the first slot and sencond slot
Click to expand...
Click to collapse
You need to reboot to recovery after changing slots. You didn't do it in step 3. You only need to flash ROM on inactive slot.

idk_anymore said:
1. I change slot to my inacctive slot
2. installed twrp and went into recovery
3. change back to the first slot and wiped data, dalvik and system
4. installed disable force encryption on both slots
5. tried to install the rom on the first slot and sencond slot
Click to expand...
Click to collapse
I always had a similar issue even doing all the steps right; in your case, don't do the step 3, rest is fine.
Apparently i found, you need to wipe internal storage via fastboot after flashing DFE.
If I flash DFE (even after wiping internal via twrp) and try to flash a ROM I get similar error 1, wiping internal via fastboot seems to work.

Xadus said:
I always had a similar issue even doing all the steps right; in your case, don't do the step 3, rest is fine.
Apparently i found, you need to wipe internal storage via fastboot after flashing DFE.
If I flash DFE (even after wiping internal via twrp) and try to flash a ROM I get similar error 1, wiping internal via fastboot seems to work.
Click to expand...
Click to collapse
thank you. i followed your step but i wiped both slots after i installed DFE, I then installed twrp and flashed the rom

idk_anymore said:
thank you. i followed your step but i wiped both slots after i installed DFE, I then installed twrp and flashed the rom
Click to expand...
Click to collapse
Cool, glad it worked.
You wiped both the slots from fastboot or twrp?

Xadus said:
Cool, glad it worked.
You wiped both the slots from fastboot or twrp?
Click to expand...
Click to collapse
i wiped them from fastboot

mine says " Updater process ended with ERROR :1 error installing zip file

nimajneb25 said:
mine says " Updater process ended with ERROR :1 error installing zip file
Click to expand...
Click to collapse
Take a little effort to read, the issue was literally discussed in the preceding few posts.

Hello, i tired clean flashing the 3.0 (1011) and for some reason it doesn't boot.
I can see the Google boot animation and the bar below Google logo loading but the ROM doesn't boot; even after keeping it like that for 15-20 mins.
I tired doing this twice, same result; am I doing something wrong, because the 2.1 (0916) version works perfectly fine which I was using until now.

Xadus said:
Hello, i tired clean flashing the 3.0 (1011) and for some reason it doesn't boot.
I can see the Google boot animation and the bar below Google logo loading but the ROM doesn't boot; even after keeping it like that for 15-20 mins.
I tired doing this twice, same result; am I doing something wrong, because the 2.1 (0916) version works perfectly fine which I was using until now.
Click to expand...
Click to collapse
Hmm that shouldn't happen. Can you elaborate your flashing process as pie and ten have the same procedure

AryanAA said:
Hmm that shouldn't happen. Can you elaborate your flashing process as pie and ten have the same procedure
Click to expand...
Click to collapse
I literally followed the tutorial from scratch.
I was on 2.1 previously and flashed stock .98 vendor; followed the entire guide (except flashing DFE because it never works for me even after -w from fastboot) and flashed the ROM in twrp, flashed permanent twrp on both slots, rebooted to twpr and rebooted to system.
I can then see the Google boot animation and that's it, it just keeps loading.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 17.1 for Galaxy S10 Series​
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working:
- Wifi
- Sound
- mali drivers
- USB tethering
- Video Playback
- Fingerprint Sensor
- Ril (Mobile data,calls, sms and stuff)
- Sensors
- Bluetooth
- Wifi HotSpot
- MTP
- 2D and 3D gpu acceleration
- HW encoding/decoding
- GPS
- Cameras (All of them)
- HWcomposer (HWC)
- Signal indicator
- Double tap to wake
- Wireless PowerShare
Not Working
- VoLTE and VoWiFi will not be implemented (for now) as they heavily depand on samsungs framework
To properly report a bug (Please dont report things already on the Not Working list)
a) Logcat
b) /proc/last_kmsg (or /proc/kmsg)
c) /data/tombstones
d) dmesg
Please do not report bugs if you have performed any system modifications excluding gapps installation
Installation instructions
Make sure you are on Q stock firmware (All of the Q firmwares are tested and confirmed to be working, This should be the case with new fws too as long as Samsung doesnt significantly change bootloader trustzone bits)
Download Q twrp from this thread
flash twrp as per given instructions
if you are coming from stock and have encryption enabled format data (Note i said format, Wiping it in twrp is not the same as formating it)
wipe cache, dalvik cache and system
flash LineageOS
If you want to have gapps flash them right after flashing the rom before first booting
Reboot the device
Downloads:
Google drive
Mega.nz
(Select build coresponding to your devices codename, S10e = beyond0lte | s10 = beyond1lte | s10+ = beyond2lte)
sha256 checksums
Code:
93ca94478bd8fa8e95fd513d8aae82b8e3aa0d21484e31ba2098c1e5e6693990 lineage-17.1-20210112-UNOFFICIAL-beyond2lte.zip
afb505986373bbeb10ade91f67765d800f504a933c6b94d88c4013382ab32270 lineage-17.1-20210112-UNOFFICIAL-beyond1lte.zip
06a334e091bdaac91f6c64559b5c9746559178facc7364b5676c39ddaa826a18 lineage-17.1-20210112-UNOFFICIAL-beyond0lte.zip
4668a9cc55f6135403120370e668548a beyond2lte-boot-magisk.img
4954c5f2cbedbc2bbd90362745d93a1d beyond1lte-boot-magisk.img
84ec49e64560477e1df87417dbc4890e beyond0lte-boot-magisk.img
If you need general help or questions feel free to join Telegram group
Gapps
READ BEFORE INSTALLING MAGISK
I do this in my free time so bear that in mind when you notice I didn't fix known bug in next available build, Currently i work on this alone and i am not one of those kangers that just copy source and claim it as their own work,
if you want to support the project feel free to buy me some coffee paypal.me/ivanmeler
Based On Android Q
Changelog
01.12.2021.
- Merged january security update
- Updated magisk boot image to magisk 21.2
- Misc performance and security updates
12.12.2020.
-Merged december security update
- Merged december vendor security update
- Updated magisk images to 21.1
- Synced with los source
11.09.2020.
- Updated vendor to XXU9DTJA
- Switched to more calibrated sensor for Adaptive Brightness
- Merged November 2020. Security update
- Synced with LOS source
10.08.2020.
- Updated vendor to FXXS9DTI8
- Fixed camera and bt issues present in previous build
- Merged october 2020 security update
- Synced with LOS source
- Updates magisk images to latest canary build (turns out it was more stable than beta version)
09.10.2020.
- Merged OneUI 2.5 Kernel and vendor (DTH7)
- Enabled 5GHz tethering
- Updated Magisk images
- Merged September 2020 Security update
- Tuned little core optimizations
- Enabled vibrator intensity control (under accesibility)
- Misc performance and stability improvements
- Synced with LOS source
08.05.2020.
- Imported G97*FXXU8CTG4 vendor changes
- Merged August 2020 system and vendor security updates
- Improved system security and stability
- Synced with LOS source (Check out new extended volume panel)
07.08.2020.
- Imported G97*FXXS7CTF3 vendor changes
- Merged July 2020 security update for both system and vendor
- Misc performance and stability improvements
06.11.2020.
- Merged G97*FXXU7CTF1 kernel source
- Imported G97*FXXU7CTF1 vendor changes
- Removed proximity from always on display (again)
- Updated magisk images to G97*FXXU7CTF1
- Camera and wifi stability and performance improvements
- HWC stability and performance improvements
- Fixed issue where USB tethering under linux would cause kernel panic
- Synced with LOS source
06.03.2020.
- Merged June 2020 System security patch
- Merged June 2020 Vendor security patch (G97*FXXU3ASJD)
- Improved completely back theme
- Misc performance improvements
- Synced with LOS source
05.21.2020.
- Fixed DT2W on AOD
- Added completely black theme (You can access it thru styles settings entry)
- Removed blinking proximity sensor from AOD
- Added usb trust hal that can prevent usb devices from being used if plugged in while device is locked
- Exposed mdnie screen tuning modes
- Moved pin entry area above fingerprint on s10 and s10+ so they dont overlap with sensor
- Cleaned up DT2W implementation
- Added high touch sensitivity mode (Glove mode) (This can also help when using screen protectors)
- Implemented mDNIe powered color calibration (Settings>Display>LiveDisplay)
- Implemented color profiles so you can use natural colors if you wish to do so (Settings>Display>LiveDisplay)
- Next update should add even more color modes powered by mDNIe like negative and greyscale
- Updated magisk kernel images
- Synced with LOS source
05.15.2020
- Fixed boot on latest CTD1 firmware
- added ctd1 dtbo
- exposed all camera instances to external apps
- started working on HRM sensor
- merged CTD1 kernel source
- updated magisk images
- misc performance and stability improvements
05.05.2020.
- Merged G97*FXXS5CTD1 blobs with may 2020 security update
- Merged may 2020 system security update
- Fixed usb tethering issues
04.14.2020.
- Fixed significant motion sensor detection
- merged April system security update
- Added vbmeta into the zip
- Removed unused radio(ril) interfaces
- Merged Note and s10 5g kernels into same tree for easier maintanance
- Switched to source built dtbo
- Updated magisk kernel images
03.31.2020.
- April vendor security update (System is still march as april tags havent been released on aosp yet)
- Rebased kernel on top of G97*FXXU4CTC9
- Added dt and dtbo images to rom
- merged G97*FXXU4CTC9 vendor binaries
- Removed simstat service as samsung fixed dual sim device detection
- Updated boot images to Magisk 20.4
- Misc performance and stability improvements
03.03.2020.
- Merged march system security update
- Merged latest feature drop
- Synced with los source
- merged G97*FXXS4BTB3 vendor binaries
02.27.2020.
- Fixed camera cutout on S10
- Enabled proximity sensor in all apps with proper permissions
- Rewrote sensor impl
- Removed unused parts of lights hal
- Added vendor to the build (This is why rom is larger now)
- Cleaned up lights overlays and power hal handling
(This means vendor partition also gets built from source and can be more customized per aosp needs
instead of relaying on bind mounting over existing drivers)
02.19.2020.
- Fixed BT calls on some devices that had issues with WBS
- Fixed issue where on clean install or after factory reset there were no default notification sounds and ringtones set
- Synced with LOS source
02.11.2020
- Merged 4BTA8 kernel source
- Merged February security update
- Fixed MTP/USB tethering while ADB is enabled
- Synced with LOS source
02.05.2020.
- Rebased kernel on top of samsungs G975FXXU3BSKO source
- Fixed kernel not properly reporting deep sleep state to userspace
- Reimplemented sensor reporting to allow access to proximity sensor to more apps
- Updated build fingerprint to Q one
- Updated TARGET_BOARD_PLATFORM flag to reflect samsungs changes to same
- Removed releasetools which was failing on new-ish twrp releases anyway
- Removed P vndk libs
- Fixed power hal race condition
- Fixed manual network selection
- Performance and stability improvements
26.11.2019.
- Added FOD icons for S10 and S10+
(This will show up any time system or app needs to use fp sensor and will help users locate the sensor)
- Fixed detection of dual sim devices
- Misc performance and stability improvements
20.11.2019.
- Initial public release
XDA:DevDB Information
[ROM] LineageOS 17.1 for S10E/S10/S10+ Exynos , ROM for the Samsung Galaxy S10
Contributors
Ivan_Meler
Source Code: https://github.com/ivanmeler/android_kernel_samsung_beyondlte/tree/lineage-17.1
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Any stock Q firmware, Latest is recommended
Version Information
Status: Stable
Current Stable Version: 1.7.5
Stable Release Date: 2020-11-09
Created 2019-11-20
Last Updated 2020-11-09

Reserved
Reserved

Reserved
Magisk boot images are provided within each device folder named beyond*lte-boot-magisk.img you can flash them on boot slot and install magisk manager, No need to worry about rebooting to recovery or not having TWRP and magisk at the same time, Just make sure you dont try to boot to system with magisk patched TWRP as that might cause issues but as long as you have stock twrp and have flashed beyond*lte-boot-magisk.img image to boot slot you are fine, Source for given kernel is available at GitHub if you want to compile kernel yourself just run source build.sh devicename e.g. source build.sh beyond2lte, It will produce new boot image in build/ folder, To update magisk you can follow instructions given at this commit enjoy
Do note that you will have to reflash magisk boot image when updating rom

Great job, thank you so much!

I wait for m'y s10e will i be able to keep the original samsung theme from the menu ect ..?

Very nice, thanks for your hard work

:fingers-crossed::fingers-crossed::fingers-crossed:
Welcome LOS 17.0 to S10 exynos family.

thank you ivan u d the best for our samsuung s10, can't wait for the s10 reguler edition

Finally
Btw, magisk still doesn't work?

My only concern is the camera, is there a way we can install the stock S10 camera or a Google camera port on this?

Thanks Ivan!

does magisk work on this buld?

Builds for S10e and S10 are up

Thanks @Ivan_Meler. Nice work, much appreciated. Two questions: Will encryption work? Would you consider releasing the source so we can build and patch in some things?

catormeme said:
does magisk work on this buld?
Click to expand...
Click to collapse
I will post working magisk soon
wora92 said:
Thanks @Ivan_Meler. Nice work, much appreciated. Two questions: Will encryption work? Would you consider releasing the source so we can build and patch in some things?
Click to expand...
Click to collapse
Encruyption will work if you manually enable it in fstab as multidisbaler disabled it, I will release source in near in near future, Just want to sort out note10 series first

Screenshots?
Thanks to the nice work !

Encryption
Ivan_Meler said:
I will post working magisk soon
Thanks Ivan!
Encruyption will work if you manually enable it in fstab as multidisbaler disabled it, I will release source in near in near future, Just want to sort out note10 series first
Click to expand...
Click to collapse
Alternatively you can enable full disk encryption:
Download multidisabler-samsung-1.7
Open the Zip file and navigate to META-INF\com\google\android\
Open update_binary with a text editor
Search for fileencryption=. . . 2/g and add "footer"
so that the line looks like:
fileencryption=[^,]*\(.*\)$/# &\n\1encryptable=footer\2/g
Save the changed update_binary
Install (flash) multidisabler-samsung-1.7 now with the changed fileencryption instructions with TWPR.
Unmount the data partition in TWRP (if it is mounted).
Goto Advanced and open the Terminal in TWRP or use the ADB shell alternatively.
Find your data partition. For the S10/512 GB it should be sda31...
Enter "e2fsck -f /dev/block/sda31".
For the 512 GB device there will be 122804224 blocks.
Resize with "resize2fs /dev/block/sda31 122804220" (in order to make 4 blocks available for the FDE keys).
Check with "e2fsck -f /dev/block/sda31" if all went well. You should see now the size of 122804220 blocks.
Clear Cache and reboot to System.
Now you should be able to encrypt your data in LOS17 with full disk encrpytion.

Magisk guide has been posted here make sure you read it and understand what you are doing before installing it, also do not post any bug reports if you are running any magisk modules that might have caused them

byteXpression said:
Alternatively you can enable full disk encryption:
Download multidisabler-samsung-1.7
Open the Zip file and navigate to META-INF\com\google\android\
Open update_binary with a text editor
Search for fileencryption=. . . 2/g and add "footer"
so that the line looks like:
fileencryption=[^,]*\(.*\)$/# &\n\1encryptable=footer\2/g
Save the changed update_binary
Install (flash) multidisabler-samsung-1.7 now with the changed fileencryption instructions with TWPR.
Unmount the data partition in TWRP (if it is mounted).
Goto Advanced and open the Terminal in TWRP or use the ADB shell alternatively.
Find your data partition. For the S10/512 GB it should be sda31...
Enter "e2fsck -f /dev/block/sda31".
For the 512 GB device there will be 122804224 blocks.
Resize with "resize2fs /dev/block/sda31 122804220" (in order to make 4 blocks available for the FDE keys).
Check with "e2fsck -f /dev/block/sda31" if all went well. You should see now the size of 122804220 blocks.
Clear Cache and reboot to System.
Now you should be able to encrypt your data in LOS17 with full disk encrpytion.
Click to expand...
Click to collapse
Thanks. Did you try FBE too? I tried FBE on LOS 16 but this ended up in a bootloop.

Thx Ivan ! Great work... :good:I really love your work and appreciate the afford.
Looking forward to the source code release making signature spoofing for microg possible.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 18.1 for Galaxy S10 Series​
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working:
- Wifi
- Sound
- mali drivers
- USB tethering
- Video Playback
- Fingerprint Sensor
- Ril (Mobile data,calls, sms and stuff)
- Sensors
- Bluetooth
- Wifi HotSpot
- MTP
- 2D and 3D gpu acceleration
- HW encoding/decoding
- GPS
- Cameras (All of them)
- HWcomposer (HWC)
- Signal indicator
- Double tap to wake
- Wireless PowerShare
Not Working
- VoLTE and VoWiFi will not be implemented (for now) as they heavily depand on samsungs framework
To properly report a bug (Please dont report things already on the Not Working list)
a) Logcat
b) /proc/last_kmsg (or /proc/kmsg)
c) /data/tombstones
d) dmesg
Please do not report bugs if you have performed any system modifications excluding gapps installation
Installation instructions
Make sure you are on Q stock firmware (All of the Q firmwares are tested and confirmed to be working, This should be the case with new fws too as long as Samsung doesnt significantly change bootloader trustzone bits)
Download Q twrp from this thread
flash twrp as per given instructions
if you are coming from stock and have encryption enabled format data (Note i said format, Wiping it in twrp is not the same as formating it)
wipe cache, dalvik cache and system
flash LineageOS
If you want to have gapps flash them right after flashing the rom before first booting
Reboot the device
Downloads:
Google Drive
Mega.nz
(Select build coresponding to your devices codename, S10e = beyond0lte | s10 = beyond1lte | s10+ = beyond2lte)
sha256 checksums
Code:
c8b961734a7972e9db9110785ba622d48c65a3c8ada9c611165864b0411f6699 lineage-18.1-20211111-UNOFFICIAL-beyond2lte.zip
fea1d76cb049cf3d83b9863da19dd0c46b70f91cec7c2a820915adb8943a671c lineage-18.1-20211111-UNOFFICIAL-beyond1lte.zip
540c111583147e94076959fdf3ff51c3f8fc2f29ec98949c6a105d936882f8ce lineage-18.1-20211111-UNOFFICIAL-beyond0lte.zip
If you need general help or questions feel free to join Telegram group
READ BEFORE INSTALLING MAGISK
Gapps
I do this in my free time so bear that in mind when you notice I didn't fix known bug in next available build, Currently i work on this alone and i am not one of those kangers that just copy source and claim it as their own work,
if you want to support the project feel free to buy me some coffee paypal.me/ivanmeler
Due to requests from some users I added signature spoofing support to the rom which allows usage of MicroG
you can simply install MinMicroG and grant it needed permissions for signature spoofing to make it work as intended
Based On Android R
Changelog
12.11.2021.
- Merged November 2021. security update
- Further Improved bluetooth in call handling
- Added more advanced burn in protection
- Misc performance and stability improvements
- Synced with LOS source
06.10.2021.
- Merged October 2021. security update
- Improved bluetooth in call handling
- Synced with LOS source
10.09.2021.
- Merged September 2021. Security update
- Synced with LOS source
06.08.2021.
- Merged August 2021. Security update
- Synced with LOS source
10.07.2021.
- Merged July 2021. Security update
- Performance and stability improvements
- Changed sensors handling in doze mode to prevent battery drain
- Synced with LOS source
10.06.2021.
- Merged June 2021. Security update
- Synced with LOS source
06.05.2021.
- Added wifi and portable hotspot overlays
- Merged May 2021. Security update
- Synced with LOS source
08.04.2021.
- Fixed USB C audio input/output
- Fixed charging with device powered off (It also has nice new animation now)
- Merged April 2021. Security update
- Misc performance and stability improvements
- Synced with LOS source
08.03.2021.
- Added signature spoofing support
- Synced with LOS source
05.03.2021.
- Merged March 2021. Security update
- Performance and stability improvements
- Synced with LOS source
06.02.2021.
- Merged February 2021. Security update
- Misc performance and stability improvements
- Modernized AdvancedDisplay app codebase
- Cleaned up the source
- Updated magisk boot images
- Synced with LOS source
06.01.2021.
- Merged January 2021. Security update
- Fixed OpenGapps installation from lineage recovery
- Fixed features that broke with initial 18.1 merge
- Misc performance and stability improvements
- Synced with LOS source
09.12.2020.
- Merged December 2020. security update
- Merged December 2020 feature drop
- Merged S9DTK9 vendor blobs
- Switched to full vndk30 vendor
- Fixed ADB inside of lineage recovery
- Improved brightness handling even more
- Performance and stability improvements
- Updated recovery images provided in 3rd post
- Synced with LOS source
10.11.2020.
- Further improved auto brightness handling
- Merged November 2020. security update
- Performance and stability improvements
- Updated recovery images provided in 3rd post
- Synced with LOS source
03.11.2020.
- Fixed issues with overlays and s10 camera cutout
- Enabled access to fingerprint for apps that were looking for secure biometics device (e.g. paypal)
- Improved automatic brightness handling (Switched to calibrated sensor virtual device which calculates brightness more precisely)
- Pinned SystsemUI and SurfaceFlinger to ram to imrpove responsivness
- Added blur to dropdrown notifications panel
- Enabled device controls from power menu
- Synced with LOS source
- Misc performance improvements
22.10.2020.
- Merged october security update
- Added back mDNIe display tuning options
- Added back a lot of previously non working los features
- Misc performance and stability improvements
- Synced with los source
07.10.2020.
- Initial public release
XDA:DevDB Information
[ROM] LineageOS 18.0 for S10E/S10/S10+ Exynos , ROM for the Samsung Galaxy S10
Contributors
Ivan_Meler
Source Code: https://github.com/ivanmeler/android_kernel_samsung_beyondlte/tree/lineage-18.0
ROM OS Version: 11.0
Version Information
Status: Stable
Created 2020-10-07

Reserved

Magisk
Magisk boot images are provided in this google drive folder named beyond*lte-boot-magisk.img you can flash them on boot slot and install magisk manager, No need to worry about rebooting to recovery or not having TWRP and magisk at the same time, Just make sure you dont try to boot to system with magisk patched TWRP as that might cause issues but as long as you have stock twrp and have flashed beyond*lte-boot-magisk.img image to boot slot you are fine, Source for given kernel is available at GitHub if you want to compile kernel yourself just run source build.sh devicename e.g. source build.sh beyond2lte, It will produce new boot image in build/ folder, To update magisk you can follow instructions given at this commit enjoy
Do note that you will have to reflash magisk boot image when updating rom

Wow ! Man, very nice job !
So, you stop release for Lineage 17 ?

troufiniou said:
Wow ! Man, very nice job !
So, you stop release for Lineage 17 ?
Click to expand...
Click to collapse
Nah will update that too, Just felt like releasing this because i had some time to sort out issues with it

The version of gapps doesnt matter even if this is android R right?
I can still flash android 10.0 gapps right?

Eidluci said:
The version of gapps doesnt matter even if this is android R right?
I can still flash android 10.0 gapps right?
Click to expand...
Click to collapse
there is link for android 11 gapps in first post under download section

Ivan_Meler said:
there is link for android 11 gapps in first post under download section
Click to expand...
Click to collapse
Oh thank you, my bad

Hi @Ivan_Meler i'm looking to change rom (i'm on hades rom but this one is not support anymore). And i just want to know if i need a custom kernel to improve battery life on LoS rom (this one or 17.1)?
Thanks for your precisions and your work to maintain on devices uptodate !

[Legenda] said:
Hi @Ivan_Meler i'm looking to change rom (i'm on hades rom but this one is not support anymore). And i just want to know if i need a custom kernel to improve battery life on LoS rom (this one or 17.1)?
Thanks for your precisions and your work to maintain on devices uptodate !
Click to expand...
Click to collapse
Battery life should be fine with stock kernel too as most of things are improved power hal side of things

Ivan_Meler said:
Battery life should be fine with stock kernel too as most of things are improved power hal side of things
Click to expand...
Click to collapse
Great. Thanks. I'll go on 17.1 LoS for awhile and will install this one when it will be more "polish".

Hi I don't know why but on previous lineage os ROMs, when I use TWRP and boot.img it would always boot back to recovery everytime I flashed a ROM.

Can you use lineage recovery to flash ROMs?

Ivan_Meler said:
If you want to root build you will have to use Magisk Canary from here, Once in app download Lineage Recovery for your device from Google Drive or Mega Patch image within manager and flash patched image to recovery partition, When booting hold recovery key combination till you get to first warning screen after that release keys and let system continue booting normally
Magisk curently has some issues properly detecting 2si devices so thats why we cant use boot.img without need for key combo for magisk right now, I will look into that in coming days but till then this is viable solution
Click to expand...
Click to collapse
Tried but says magisk still isn't installed please help.

Il be installing it soon to test it, very hype for android 11

FreeRunner2017 said:
Tried but says magisk still isn't installed please help.
Click to expand...
Click to collapse
make sure you followed instructions closely
1. Download recovery image
2. Download magisk canary app and patch recovery image
3. Flash magisk patched recovwry image (lineage recovery) to recovery partition
4. reboot and hold key combination for recovery until first warning screen shows up, after that release key combo
5. you should be in system with root
if you need further assistance im sure someone from telegram group can help you a bit more

Ivan_Meler said:
make sure you followed instructions closely
1. Download recovery image
2. Download magisk canary app and patch recovery image
3. Flash magisk patched recovwry image (lineage recovery) to recovery partition
4. reboot and hold key combination for recovery until first warning screen shows up, after that release key combo
5. you should be in system with root
if you need further assistance im sure someone from telegram group can help you a bit more
Click to expand...
Click to collapse
I did that but I still have no magisk

SD cards on the s10e just dont work, they keep saying its corrupted even after you format them in android itself ive also tried formatting in windows and twrp but same problem.
network traffic indicator can be turned on but never actualy shows up.
after installing magisk it takes apps 20 seconds to open.
if you need logs i will be happy to do so (if i can remember how to do so)

Wow, already an android 11 ROM ? Nice !
Is there the same issues as on L17 regarding bluetooth and front camera ?

Hi Ivan
Thanks for the great work! Awesome to have Android R available so early. Rom is solid.
On S10e i can confirm, it does not read MMC, i also tried formatting etc, not a biggy
On Bluetooth i can confirm that devices working, headphone sound, speakers etc. But on call when phoning, the sound does not come over to the headset.
HDMI Out is glitchy, creates flickering on secondary display, but is random....
Other than that, the rom is smooth and fast. Still checking battery...
Looking forward to developments...