I managed to compile cm12.1 for the D800 using vendor and device files from TheMuppets, and Kernel from Lg-devs.
I dirty flashed over cm12, still discovering issues. You MUST flash a cm12.1 gapps if you had gapps before or you will boot loop. Also highly recommend uninstall/re-install other google apps (like "keep").
Works:
Booting up
Wifi
LTE Data(using T-mobile APN)
Voice
Rotation (be sure you have the latest baseband)
I have the OEM case with the window on it for the watch thing:
The watch thing doesn't appear because that is not implemented(yet) in CM but it does sleep and wake with the magnet thing.
Knock to Wake
Double tap status bar to sleep
Stuff not tested:
LTE or voice on AT&T APN (I use T-mobile on this device) Please provide feedback
pretty much everything else
Not Working:
Does not grant me 3 wishes even if one of those wishes is for an iPhone
Download here:
Removed by OP for now
Contributors
SergeantWagner, cyanogenmod, TheMuppets, CAF
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: LG G2 D800
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-06-30
Last Updated 2015-06-30
reserved
Do you have @Rashed97 consent and permission? Just like the thread below, this will probably get closed.
http://forum.xda-developers.com/lg-g2/development/cm12-1-caf-5-1-1-variants-dt2w-t3122206
I have not. I'll reach out to him and see what's up. Closing this thread in the mean time (if I can figure out how)
Edit: could not figure out how to close the thread so I took down the download links.
SergeantWagner said:
I have not. I'll reach out to him and see what's up. Closing this thread in the mean time (if I can figure out how)
Edit: could not figure out how to close the thread so I took down the download links.
Click to expand...
Click to collapse
It's all good man, just wanted to inform you that Rashed didn't want his CM sources out yet until finished and didn't want ya getting 'punished' so to speak
Pseudo_Soldier said:
It's all good man, just wanted to inform you that Rashed didn't want his CM sources out yet until finished and didn't want ya getting 'punished' so to speak [emoji14]
Click to expand...
Click to collapse
However, there are at least 5-6 roms which are using these sources, so... [emoji14]
Because, as far as I'm concerned - RR, Bliss, 2x Euphoria, AICP and some builds by zg85 (for d802) - all of them are more or less based on lg-devs sources.
Hbohd said:
However, there are at least 5-6 roms which are using these sources, so... [emoji14]
Because, as far as I'm concerned - RR, Bliss, 2x Euphoria, AICP and some builds by zg85 (for d802) - all of them are more or less based on lg-devs sources.
Click to expand...
Click to collapse
From how I understand it, those use official CM sources as Rashed has not pushed CAF into CM yet. Yes they work on the CAF bootstacks but are not fully based on the rest of Rashed CM work. It's confusing to me tbh, I was simply referencing the previous closure not stating rules or anything. No source has been posted for these builds in OP so I can't be sure.
Hbohd said:
However, there are at least 5-6 roms which are using these sources, so... [emoji14]
Because, as far as I'm concerned - RR, Bliss, 2x Euphoria, AICP and some builds by zg85 (for d802) - all of them are more or less based on lg-devs sources.
Click to expand...
Click to collapse
Right, and drgravy is a member of lg devs, so he is allowed to use his own work.
Other ROMs have seaked permission from rashed and the lg devs.
The problem is people go all lolololololololopensource and don't have enough respect to ask the guys working on it, and giving proper credits.
I reached out to @Rashed97 to see what I can do to help move things along, my main goal was to try to get official nightlies kicked off for the D800, and using the sources mentioned in the OP it has been stable for me for about a day so far. It looks like his main concern with the linked post was it may be dangerous to flash with the wrong bootstacks and he doesn't want peeps to claim his work as their own. Perfectly understandable. So I won't upload builds until rashed is cool with it, but if you want to try this yourself you can compile using the sources mentioned above with minimal configuration changes. I got my d800 on the cheap from e-bay so I'm not too worried about bricking it, but if you are worried about yours maybe you should just wait .
Related
Presenting CM13 unofficial. Built from mostly pure CyanogenMod sources, with a few tweaks that I try to keep updated on my github. This is only possible due to the work of Ziyan and MWisBest.
Instructions
First time flashing CM13 to your toroplus (or coming from another ROM)?
Unlock & install a recovery
Wipe data & cache partitions
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Updating from a previous build?
Just install the latest ROM zip. If you had Google Apps installed, they will be reinstalled automatically.
Click to expand...
Click to collapse
Downloads
Latest cm-13.0 build: https://www.androidfilehost.com/?fid=24588212152305191
Final cm-12.1 build: https://www.androidfilehost.com/?fid=24438995911970260
All builds: https://www.androidfilehost.com/?w=files&flid=23531
Unofficial TWRP recovery: https://www.androidfilehost.com/?fid=24459283995311440
Google Apps: http://opengapps.org/
- Platform: ARM
- Android: 6.0
- Variant: pico (recommended), or nano
Bugs
LTE Data does not work. (3G works)
XDA:DevDB Information
UNOFFICIAL CyanogenMod 13.0 (DDK 1.9), ROM for the Samsung Galaxy Nexus
Contributors
musical_chairs
Source Code: https://github.com/CyanogenMod
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2014-09-25
Last Updated 2016-07-15
now with Marshmallow!
Will this be updated to work with the new GPU drivers? Thank you!
Sent from my LG-LS980 using XDA Free mobile app
illinoissparks18 said:
Will this be updated to work with the new GPU drivers? Thank you!
Sent from my LG-LS980 using XDA Free mobile app
Click to expand...
Click to collapse
Short answer: yes. I'm going to try grabbing the relevant code from MWisBest's githib. If it turns out to be too involved for my limited skills, it will have to wait until Ziyan submits the changes to CM.
musical_chairs said:
Short answer: yes. I'm going to try grabbing the relevant code from MWisBest's githib. If it turns out to be too involved for my limited skills, it will have to wait until Ziyan submits the changes to CM.
Click to expand...
Click to collapse
OK I am going to be on board with testing for sure. I left a post in the now no longer current official thread that I flashed the last official build yesterday and I had perfect 3G to LTE to 3G handoff, rock solid WiFi strength, basically everything seemed to work very well. I am looking forward to seeing how things progress. I haven't been able to keep any of the official CM builds from bootlooping until now. Hopefully you stick with it because I am getting better performance from this device than I have seen in a long while
Sent from my Galaxy Nexus using Xparent Gray Tapatalk 2
musical_chairs said:
Short answer: yes. I'm going to try grabbing the relevant code from MWisBest's githib. If it turns out to be too involved for my limited skills, it will have to wait until Ziyan submits the changes to CM.
Click to expand...
Click to collapse
Awesome!! Thank you!!
Sent from my LG-LS980 using XDA Free mobile app
I should've had a machete to hack through the jungle of build errors from pulling a modified OmniROM device tree into a CyanogenMod build. Looks like the build is rolling now though, with any luck it might just complete successfully - who knows, it might even boot.
The only thing slower around here than me is my poor old computer.
Its kind of ironic that the Galaxy Nexus was the first official LTE device for Sprint and I am only just recently starting to get LTE on a semi regular basis.
@musical_chairs, take your time with your builds. I assure you that they are appreciated. Now that this device is actually getting decent (for Sprint) signal and still has current builds makes it more enjoyable to use than just about any time I can remember....I just miss Imoseyon's Lean kernels. I got GREAT battery on those. They were compiled in the now deceased (I think) CMRemix ROMs but the LTE is definitely a plus
Update: For now, I have stopped working on building CyanogenMod with the DDK 1.9 drivers. I was ending up with a completely unsustainable mess of a device tree, and was still running into build errors. If new drivers are what you want, use FML. I'll focus on keeping the regular CM builds updated for the time being.
musical_chairs said:
Update: For now, I have stopped working on building CyanogenMod with the DDK 1.9 drivers. I was ending up with a completely unsustainable mess of a device tree, and was still running into build errors. If new drivers are what you want, use FML. I'll focus on keeping the regular CM builds updated for the time being.
Click to expand...
Click to collapse
Link to toroplus build for fml?
Zeinzu said:
Link to toroplus build for fml?
Click to expand...
Click to collapse
I'm following its developements, but haven't had time to try it personally yet.
http://forum.xda-developers.com/galaxy-nexus/sprint-develop/rom-fml-fork-life-10-13-2014-t2903695
Thanks for trying anyhow. I'm glad cm11 still has a fighting chance with the GNex, thanks to you, and all the others who are able to help out.
We're all waiting for cm12 to get to a buildable state. In the meantime, I've been working on upgrading my build box. My old machine was just barely capable of building android, the 'new' one isn't new but it was a real beast in its day. Time for a clean build has dropped from a day and a half to two and a half hours. I'm happy...
jd14771 said:
just curious, how difficult is it to compile roms? Do you need to know how to write your own code or is it over glorified copy and pasting with packages and stuff?
Click to expand...
Click to collapse
I do a lot of copying and pasting, a lot of reading guides, and a whole lot of google-ing. I don't know how to write my own code, but I have lots of experience with applying patches. Compiling roms is not that hard if you're a Linux user, have a working knowledge of the command line, and have a basic understanding of git. Take away any one of those things and it becomes a whole lot harder.
jd14771 said:
Yeah i haven't gotten to play with linux, nor do i know what git's are (i think they are large batch's of code posted in plain text?) . always wanted to try but don't have the time.
Click to expand...
Click to collapse
git is the software the devs use to keep track of changes in the code. Most Android devs have their git repositories on Github, those are probably what you are thinking of. Every little change (called a 'commit') has its own unique hash number. It's pretty amazing, you can look through somebody else's commits and find one that fixes a bug you are working on, or split tens of thousands of changes in half, then in half again, then in half again, etc., and pinpoint the exact commit that causes a bug on your system - though that's more useful in Linux kernel development than in Android.
I don't really have the time either, but it's such a fun hobby...
Using quickboot?
Coming from Vanir. Really like the facility quickboot gives. Anyone "enabled" it? I can't seem actually show the field to turn it on. Settings search finds it, but that's it... Noticed Dev options is hidden also. What's up?
Props for keeping CM11 updated. Really like I can actually use SMS in Hangouts.
I haven't been following the nightly changes since toroplus went dark, but I ran a build today--nothing special, just the latest cm...whatever changes they are. I could post it but don't know if I should make another thread or just link to it in here.
Anything substantial get added to general cm in the last few months?
I tried to run a build of cm12 but it looks like things still aren't ready for building yet, either that or I'm not sure how to switch back and forth between the cm11 repo and cm12 without getting repo update errors.
yotvb531 said:
I tried to run a build of cm12 but it looks like things still aren't ready for building yet, either that or I'm not sure how to switch back and forth between the cm11 repo and cm12 without getting repo update errors.
Click to expand...
Click to collapse
I got cm12 built and booting for toro for the first time today. I'm trying to get mobile data working on that, then I'll give toroplus a shot. Looks like it shouldn't be too much trouble. Feel free to post any of your builds here, or start your own thread if you prefer.
Here's my cm11 build from yesterday--equivalent to a plain nightly. It's been running fine since I dirty flashed it last night. Md5sum is linked as well and noted below.
https://www.dropbox.com/s/lp4j3yayuktmlot/cm-11-20141227-UNOFFICIAL-toroplus.zip?dl=1
https://www.dropbox.com/s/z1b72j7oh70eg5w/cm-11-20141227-UNOFFICIAL-toroplus.zip.md5sum?dl=1
MD5 Sum: e6c265c57e00b4949362d6ff53c9a799
Well I got cm12 built and booting on toroplus, unfortunately the RIL is completely borked, so no cell service at all at this point. I'll keep working on that, in the mean time check out the updated cm11 build in the post right above this one.
SlimRoms is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by the public Gerrit to submit patches of any type.
Important links:
slimroms.org - The official webpage where you find everything you need to know about SlimRoms.
Downloads - Download the rom for S6 from here
Kernel Source - The source of your device's kernel.
Get in touch! - Contact SlimRoms at these places if you have questions, requests or feedback.
Google+
Twitter
Facebook
Thanks!
The entire team who helped with the device tree to make this device get CM. Hats off guys. Really appreciate your hard work.
For dual boot, kindly follow this link.
If you have any other queries, kindly see this link for any issues other users face before posting here.
Working and Not working:
Everything as in CM
/* Supported devices */
Galaxy S6 International (SM-G920F/I, zerofltexx)
Galaxy S6 SK (SM-G920S, zeroflteskt)
Galaxy S6 KT (SM-G920K, zerofltektt)
Disclaimer: SlimRoms are not responsible for any damages to your device.
XDA:DevDB Information
SlimRom 6.0 for Galaxy S6 , ROM for the Samsung Galaxy S6
Contributors
a2441918
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Testing
Current Beta Version: 0.2
Beta Release Date: 2015-12-21
Created 2015-12-16
Last Updated 2015-12-23
No offense but you're the 3rd one to release a rom that has the exact same source as the original CM13 thread, and all others have been shutted down. You should invest your time helping the main branch fixing their stuff instead of dividing everybody. Releasing a ROM that is exactly the same with a different name is a total lack of respect to those who really worked hard to make this happen, plus your sources are not even public :/
virulentt said:
No offense but you're the 3rd one to release a rom that has the exact same source as the original CM13 thread, and all others have been shutted down. You should invest your time helping the main branch fixing their stuff instead of dividing everybody. Releasing a ROM that is exactly the same with a different name is a total lack of respect to those who really worked hard to make this happen, plus your sources are not even public :/
Click to expand...
Click to collapse
I have no sources. I have published the link to the kernel source. Every Rom is based off CM tree and it is not the same. Its SLIM.
a2441918 said:
I have no sources. I have published the link to the kernel source. Every Rom is based off CM tree and it is not the same. Its SLIM.
Click to expand...
Click to collapse
I'm pretty sure it's an XDA rule to publish the source of every rom/kernel. Otherwise it could contain malware/keylogger or could be fake. I took a look at SLIM's github and i didn't see anything related to the S6.
Dude you dont get it. According to XDA you should publish a source for the kernel and I did. Go ahead with the link I posted and it will direct you to the kernel source. It is not necessary that the kernel should belong to Slim.
I see no official source on your GitHub. Is this just a rebrand of CM 13 for S6?
Nevermind keep it coming
Sent from my SM-G920F using Tapatalk
bio4554 said:
I see no official source on your GitHub. Is this just a rebrand of CM 13 for S6?
Click to expand...
Click to collapse
Dude, I used Slim rom sources and this device kernel and vendor tree and built the rom. There is no need for sources in my github. And Slim and CM are different. I am not just rebranding. I am building this from source.
a2441918 said:
Dude, I used Slim rom sources and this device kernel and vendor tree and built the rom. There is no need for sources in my github. And Slim and CM are different. I am not just rebranding. I am building this from source.
Click to expand...
Click to collapse
It's like steeling the bigmac sauce's receipe to make your own burger restaurant, but saying that you use a different bread.
Omg whats the issue with you guys? I gave credit for the developers, linked to the kernel tree of the actual developer and now what is that you people need?
a2441918 said:
Omg whats the issue with you guys? I gave credit for the developers, linked to the kernel tree of the actual developer and now what is that you people need?
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...yanogenmod-13-galaxy-s6-t3269984/post64321767
Having a second ROM with same issues doesn't help at all. Why wouldn't you wait for it to be stable instead of releasing another alpha rom?
virulentt said:
http://forum.xda-developers.com/gal...yanogenmod-13-galaxy-s6-t3269984/post64321767
Having a second ROM with same issues doesn't help at all. Why wouldn't you wait for it to be stable instead of releasing another alpha rom?
Click to expand...
Click to collapse
You could have pointed that out in the first post itself rather than us spamming this thread. I will remove the download link and keep this thread closed for now.
virulentt said:
I'm pretty sure it's an XDA rule to publish the source of every rom/kernel. Otherwise it could contain malware/keylogger or could be fake. I took a look at SLIM's github and i didn't see anything related to the S6.
Click to expand...
Click to collapse
The only source required to be posted by GPLv2 and XDA requirements is kernel source. Also Slim and CM both have posted open permissions to build.
New build up. See OP for download link.
Download Link is dead for me.
a2441918 said:
New build up. See OP for download link.
Click to expand...
Click to collapse
ripv2 said:
Download Link is dead for me.
Click to expand...
Click to collapse
Try it out now mate.
Up and reachable Ill give it a shot!
a2441918 said:
Try it out now mate.
Click to expand...
Click to collapse
Any changelog ? and is this usable for edge version ? or it has same screen issue ?
bigbossclk said:
Any changelog ? and is this usable for edge version ? or it has same screen issue ?
Click to expand...
Click to collapse
I guess its usable. But a different build for S6 Edge is in the works.
Doesnt Boot on my 920f latest recovery clean install with and without gapps. Never finnishing Boot animation.
So I've been building some roms for this device for a while now and figured I'd share my personal builds. I do not have the time to officially maintain these or provide any support which is why I'm posting them here. Hopefully it doesn't get removed. These have been tested on the US variant.
ROMs I'm currently building weekly-ish:
CM13 - credits to the CM team. Moved. Please see this thread for updates.
Bliss - credits to the CM and Bliss team. As of 8/12/16 this ROM is currently discontinued until if/when the source starts working again. Nothing I can do about this. Last build can be downloaded here.
Resurrection Remix - credits to the CM and RR team. Moved here.
CAF-AOSP - See main thread here.
The device tree, kernel, and vendor stuff is all coming from @surdu_petru He's done an outstanding job on this device. We should all be thankful for the work he has done which has allowed things like CM to work on this device. I have rolled back some of the changes in his latest version to fix some of the issues introduced on his most recent sources. You should all buy him a beer if/when he returns
I'd also like to give credit to @EarlyMon and ncrypt3d for their guidance and willingness to teach a newbie.
Disclaimer: I am not responsible if you break your phone using these files. Educate yourself before using them.
Installation: Same as the CM13 requirements found here: http://forum.xda-developers.com/gx8/development/rom-t3342802
Gapps: I've only tested these with opengapps.
Sources:
CM: https://github.com/CyanogenMod
Bliss: https://github.com/BlissRoms
Resurrection Remix: https://github.com/ResurrectionRemix
Device: https://github.com/Huawei-Dev/android_device_huawei_rio
Kernel: https://github.com/Huawei-Dev/android_kernel_huawei_msm8939
Vendor: https://github.com/Huawei-Dev/android_vendor_huawei_rio
9/24/16 - Thread created for resurrection remix in the appropriate forum. This thread is effectively obsolete.
9/17/16 - Now helping build weeklies for the main CM13 thread. Resurrection Remix updated to include latest device fixes and snapdragon camera.
9/8/16 - CM13 discontinued now that the dev has returned. Please see his thread for future updates and give him your thanks. Bliss is still broken. Resurrection remix has been updated to latest sources and includes Sept 2016 security patches. DT2W should be working.
9/1/16 - Weekly updates.
Can you work on his MM Emui version so that it does not cause the flickering issue when flashed? As you have the US model {RIO-L03} i hope.
Huawei has not released M for the US and I haven't heard of any plans to update it. Nothing I can do about that. Unfortunately these roms require the tz.img from the foreign M release for the fingerprint to work. These builds will check to make sure the tz.img matches or the install will fail. Again this is all work done by @surdu_petru.
Long story short, nothing I can do. Yell at Huawei for providing no support in the US for this phone.
You should do a separate topic with changelogs for every rom.
It would look better and cleaner.
Going to test ressurection and bliss.
Where do we report for any bugs?
Best of luck.
AndroidNewb666 said:
You should do a separate topic with changelogs for every rom.
It would look better and cleaner.
Going to test ressurection and bliss.
Where do we report for any bugs?
Best of luck.
Click to expand...
Click to collapse
Please re-read second sentence in the OP.
redbeard1083 said:
Please re-read second sentence in the OP.
Click to expand...
Click to collapse
Yeah sorry ,i did end up reading it and forgot to edit...
Anyways, too bad you dont have time... You did a very nice job on the ROMs.
The Bliss rom is just outstanding
Cheers.
AndroidNewb666 said:
Yeah sorry ,i did end up reading it and forgot to edit...
Anyways, too bad you dont have time... You did a very nice job on the ROMs.
The Bliss rom is just outstanding
Cheers.
Click to expand...
Click to collapse
Have you tried all of them? Which one did you like Best?, is less glitchy
Snarfer90 said:
Have you tried all of them? Which one did you like Best?, is less glitchy
Click to expand...
Click to collapse
They are all the same but each one has its own features regarding customization.
The Bliss Rom and Ressurection were the best ones because they are packed with features that CM doesn't have.
I'd go for Bliss.
Big thanks for the builds... great work... Can someone confirm that d2tw works... For me this option seems to be broken... I tried RR bliss and cm
Gesendet von meinem HUAWEI RIO-L01 mit Tapatalk
Is this build actually working with RIO-L01 (Single-Sim)?
Thanks!
alex636 said:
Big thanks for the builds... great work... Can someone confirm that d2tw works... For me this option seems to be broken... I tried RR bliss and cm
Gesendet von meinem HUAWEI RIO-L01 mit Tapatalk
Click to expand...
Click to collapse
It's currently broken. These are essentially running an older version of @surdu_petru's code before I started seeing wifi and ril issues on my device.
Can you provide a download link for the bliss rom... Thanks @AndroidNewb666
KobySam87 said:
Can you provide a download link for the bliss rom... Thanks @AndroidNewb666
Click to expand...
Click to collapse
See link at bottom of OP. Speaking of bliss, that seems to be broken since the last big CM update. New builds are no good until the bliss team fixes it (if they even choose to fix it with CM14 on the horizon).
redbeard1083 said:
See link at bottom of OP. Speaking of bliss, that seems to be broken since the last big CM update. New builds are no good until the bliss team fixes it (if they even choose to fix it with CM14 on the horizon).
Click to expand...
Click to collapse
Will you advise that I wait for a stable rom????
KobySam87 said:
Will you advise that I wait for a stable rom????
Click to expand...
Click to collapse
You should do whatever you think is best. I have no opinion on whether or not it's the right decision for you.
d3nni said:
Is this build actually working with RIO-L01 (Single-Sim)?
Thanks!
Click to expand...
Click to collapse
I don't know. Did the CM13 builds ever work on your device? This uses the same kernel. If it worked there, these should also work.
d3nni said:
Is this build actually working with RIO-L01 (Single-Sim)?
Thanks!
Click to expand...
Click to collapse
Yes, it is working well.
new weeklies uploading now.
krispin said:
Yes, it is working well.
Click to expand...
Click to collapse
Good to know. Thanks.
I'm creating this thread to post personal builds to those that want to try them. Just an FYI I'm choosing this approach instead opening numerous unoffical build threads because 1)I'm unsure how much time I'll be able to invest 2) I'm too much of a flashaholic to stay with one rom long enough to properly support it 3) I'm not a dev, I'm just someone with a linux laptop that enjoys putting pieces together. Also If anyone would like to share their builds or assist with others that want to learn to compile. (JUST PLEASE DO EVERYONE A FAVOR AND MAKE SURE THE ROM BOOTS FIRST AND ARE NOT GOING BRICK DEVICES ALONG WITH SOURCES)(BUGS are expected this is a newbie.....as in Me thread)
Note:
I used SuperSU for root on this rom with no problems what so ever, Mileage may very with those that use Magisk.
Maintaining of rom may be here nor there depending on if I grow tired of the rom and decide to go to bigger and better things or if time allows, so please don't expect or request updates......I'm doing this just to share my personal builds and hopefully spark interest with others.
OREO BUILD ......CARDINAL-AOSP
rom: https://github.com/Cardinal-AOSP
more info:https://plus.google.com/communities/110928715574226998482
Launcher used in screenshot: https://www.androidheadlines.com/20...ixel-2s-pixel-launcher-with-new-features.html
Missing gallery app, use simple gallery or one your choose from playstore.
bugs....same as anyother oreo rom at the moment as this is built one top lineage and vache device tree and HAL's
download: https://drive.google.com/file/d/0B2AnAjPZx9hjYnBrZEJmdFBSWVE/view?usp=sharing
MD5: 36f091041cf70dd03ce8e7c4b37c4397
XPERIENCE 12.0 OREO!!
rom: https://github.com/XPerience-AOSP-Lollipop
website: http://thexperienceproject.com/
download: https://drive.google.com/file/d/0B2AnAjPZx9hjckNWQllFQjZ2Q3c/view?usp=sharing
md5sum: b7bbf632b76deb74d35336bf47466f77 xperience-12.0.0-20171015-HOMECASE-potter.zip
Bugs bluetooth app may FC on initial boot but once in the rom it seems to be working fine
Thanks and Happy Flashing.......or sharing which ever you choose.
PS yeah I know I need to make this OP a little more easy to find builds and I'll get to that shortly
Source:
Device: https://github.com/boulzordev/android_device_motorola_potter
Vendor: https://github.com/boulzordev/android_vendor_motorola_potter
Kernel: https://github.com/boulzordev/android_kernel_motorola_msm8953
Rom: https://github.com/CypherOS
Here is my Device Folder for those that want to download and tinker https://drive.google.com/drive/folders/0B2AnAjPZx9hjeVVzVWNrajV6MTg?usp=sharing
Very handing DYI that I've used back with I was building roms for my LG phone https://forum.xda-developers.com/showthread.php?t=2223690
older nougat builds:
-CypherOS 4.1.2 release
-Camera fixes thanks and cherry picked from gregor160300 along with his version of CMActions that are better suited for aosp based roms.
Rom: https://drive.google.com/file/d/0B2AnAjPZx9hjdUwwR0pHdzZoU1k/view?usp=sharing
MD5:93a5e9a1435051f18b799dd794898a1b
SlimRoms Build 1.11
synced to give us the up to date slim since our beloved potter has been dropped from official status.
https://drive.google.com/file/d/0B2AnAjPZx9hjb1RhaTdkODlzclE/view?usp=sharing
md5sum: 01eec677fc705ef5432cda7597c0aebf
Working like a charm
NEW UPDATE! 9/25 this is a new upload any previous update is now obsolete and will probably be my last build for the nougat version of this rom as I'm looking at other build possibilities
Thanks alot. Will flash ROM and let you know.
SlimRoms build 1.11
new SlimRoms build is up:good:
I Feel like playing
feeling the urge to pull out some more hair and scream a few more swear words at my computer:silly:
Oppps I slipped
just a teaser of things to come for those that check this thread
tuxattack80 said:
just a teaser of things to come for those that check this thread
Click to expand...
Click to collapse
Awesome :good: But why don't you create a thread in the Rom section? BTW What Linux distro are you running?
McKellen said:
Awesome :good: But why don't you create a thread in the Rom section? BTW What Linux distro are you running?
Click to expand...
Click to collapse
I'm running Ubuntu mate 16.04 at the moment but I hop distros from arch to fedora. And that kind of answers your other question, I'm to A.D.D to stick with one rom for long and I open a thread I'm committing to that rom. This is more or less a hobby for me and when get a chance I'll build but it doesn't happen very much between the kids and the girlfriend lol.
Is that cardinal 8.0
syrkles said:
Is that cardinal 8.0
Click to expand...
Click to collapse
Yep
Xperience 12.0 oreo!!
New build up in OP, ENJOY!
Hey thanks for sharing I'll test one out this weekend .
Cardinal Update is in the oven
Had a ittle bitty stump in the build but don't worry I made it up to you all by adding a couple of additional features
PS....why is it so quite in here?? Feels like I'm talking to myself.........this is a discussion/build form lol! crickets!!crickets!! crickets!! Believe me all I don't mind a little off topic as long as you keep it clean and nice and android focused. Just don't blow up the thread with screenshots or links
Soooooo........thinking about a rebase to another linux distro soon...any input on with one? Thinking Fedora because it's also a great distro for building on but I do miss Solus and Arch
Hi!! I'm that guy from g+ remember me?? The one asking for the cypher os build? Well I've come to ask again, sorry if that sounded a little rude.
No, but my DUDEE! I think cypher 5.0 sources are up already. Can you make a build? Please? I don't if you take request like this but at least I tried.
Also that cardinal build is ? supper smooth, just one thing fingerprint gesture didn't work either. I hope you fix that in the update. Thank you for all this ROMs that no one are building, just you
RonaldRND said:
Hi!! I'm that guy from g+ remember me? The one asking for the cypher os build? Well I've come to ask again, sorry if that sounded a little rude.
No, but my DUDEE! I think cypher 5.0 sources are up already. Can you make a build? Please? I don't if you take request like this but at least I tried.
Also that cardinal build is supper smooth, just one thing fingerprint gesture didn't work either. I hope you fix that in the update. Thank you for all this ROMs that no one are building, just you
Click to expand...
Click to collapse
delete
RonaldRND said:
Hi!! I'm that guy from g+ remember me? The one asking for the cypher os build? Well I've come to ask again, sorry if that sounded a little rude.
No, but my DUDEE! I think cypher 5.0 sources are up already. Can you make a build? Please? I don't if you take request like this but at least I tried.
Also that cardinal build is supper smooth, just one thing fingerprint gesture didn't work either. I hope you fix that in the update. Thank you for all this ROMs that no one are building, just you
Click to expand...
Click to collapse
Thanks for the feed back, I'll look into the fingerprint thing again soon but probably wont be in this build as its already building after being up all night trying to wrap my head around a feature that due to sleep will have to wait lol. I'll see if I cant get a cypher build out soon as well:good:
Cardinal AOSP Update 10/19
Alright peps, sorry for the long delay....but the build is ready. Not exactly what I want to upload because I was wanting to add a certain feature but with sleep deprivation kicking in I was forced to put it on the back burner and do a clean build. So with that said I'm going to get some rest and I will update the OP with changes and so on tomorrow...HAPPY FLASHING :cyclops::silly::victory:
download : https://drive.google.com/file/d/0B2AnAjPZx9hjbV93M2N1Q0pJcEk/view?usp=sharing
md5sum: f7c99b93e53163e4533e55e66b687be8
Quick observation snapdragon camera force closes, so you footej or whatever alternate camera app you like, will revert back to camera2 in next build
tuxattack80 said:
Cardinal Update is in the oven
Had a ittle bitty stump in the build but don't worry I made it up to you all by adding a couple of additional features
PS....why is it so quite in here?? Feels like I'm talking to myself.........this is a discussion/build form lol! crickets!!crickets!! crickets!! Believe me all I don't mind a little off topic as long as you keep it clean and nice and android focused. Just don't blow up the thread with screenshots or links
Soooooo........thinking about a rebase to another linux distro soon...any input on with one? Thinking Fedora because it's also a great distro for building on but I do miss Solus and Arch
Click to expand...
Click to collapse
Arch
Thanks going to try this but you should move your thread to Moto G5+ Development Section. I think no one checks ROMs on Discussion section.
Edit - Your Drive Link is not working - https://goo.gl/7yBr7e
Who are we?YAAP is a project founded by Adhitya Mohan (@poad42) and Ido Ben-Hur (@idoybh) with the goal of staying close to AOSP in design goals, offer a clean interface, do as much as original development as possible and avoid becoming a kitchen sink and cherry picked mess.
Bug reporting:
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab dmesg . (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Downloads
Downloads
cheeseburger (OP5) : https://drive.google.com/file/d/11S4K-_SGOJLyHFd9hX_P_Uj_2Ai4wzQL/view?usp=sharing | https://yaap.angerycat.tk/YAAP-11-Alpha-yaap_cheeseburger-20201025.zip
dumpling (OP5t) : https://drive.google.com/file/d/1B4JIzRcl3iLmq7imzYvhrNQ3ESjfRe8U/view?usp=sharing| https://yaap.angerycat.tk/YAAP-11-Alpha-yaap_dumpling-20201025.zip
Flashing ProcedureInstall TWRP (Latest codeworkx is recommended)
Coming from a different rom / OS you'll need to clean flash:
1. Wipe data (Factory reset)
(1.1.) If coming from stock OS you may need to format internal storage
2. Flash rom
(2.1.) Flash mods (magisk, no veirty if on ext4 decrypted.)
3. Rejoice
For dirty flash just skip step 1, 1.1
and possibly 2.1 if your mods support addon.d (ex: Magisk)
It does not matter when you flash the firmware zip, and you only need to flash it once per firmware version
XDA:DevDB Information
Yet another AOSP project, ROM for the OnePlus 5
Contributors
poad42
Source Code: https://github.com/yaap
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: OOS stable 10.0
Based On: AOSP
Version Information
Status: Alpha
Created 2020-09-15
Last Updated 2020-09-15
Working:
Camera/Video/Mic
Fingerprint
Dash Charging/USB stuff
DRM(Netflix,prime video playback)
IMS (VoWIFI/VoLTE)
RIL
Video playback
Wi-Fi
Alert slider, Panel modes, HBM stuff
Permissive kernel
SafetyNet
Broken:
Encryption
Note: The ROM includes gapps with some pixel additions .
Feel like buying me some coffee for my efforts?
Donation link: https://paypal.me/generichandle
Join our chat : https://t.me/yaapop5 or https://t.me/yaapcommon
Screenshots
Congrats and Thanks for the Wonderful Support. Downloading the same...
woah! thank you so much for you work. I'm excited!
Great job Devs thank you
awesome, this is not a alpha, this is a beta :good: (my first post)
>barebones AOSP
>includes Gapps
Ok
d1n0x said:
>barebones AOSP
>includes Gapps
Ok
Click to expand...
Click to collapse
Barebones AOSP in regards to the UI because the dev's previous NitrogenOS had a bunch of customisations. I don't think that's very hard to understand. The objective is to be as barebones as possible, Gapps have nothing to do with being barebones or not.
Hello! Thank you in advance for doing this great project. It is possible to make a ROM Similar to Oxygen OS 11? I really liked this new Oxygen aesthetic. Thank you again for doing this for us.
Spider-Vice said:
Barebones AOSP in regards to the UI because the dev's previous NitrogenOS had a bunch of customisations. I don't think that's very hard to understand. The objective is to be as barebones as possible, Gapps have nothing to do with being barebones or not.
Click to expand...
Click to collapse
Yes it does. It isn't as barebones as possible in its current state because GApps is unnecessary for Android to run. It also increases the file size of the rom. False advertisation.
Besides, I've never, ever seen an initial AOSP rom for a new Android version that includes GApps on XDA. Heck, I've never seen a "barebones" AOSP rom that includes GApps. I think that's quite telling.
poad42 said:
Working:
Camera/Video/Mic
Fingerprint
Dash Charging/USB stuff
DRM(Netflix,prime video playback)
IMS (VoWIFI/VoLTE)
RIL
Video playback
Wi-Fi
Broken:
Alert slider, Panel modes, HBM stuff (all need source side changes)
Permissive kernel
SafetyNet
Note: The ROM includes gapps with some pixel additions .
Click to expand...
Click to collapse
So what can be done for broken (how can we do side changes .. Permissive kernel any link for that
Tq exited for ur reply
SirSoviet said:
Yes it does. It isn't as barebones as possible in its current state because GApps is unnecessary for Android to run. It also increases the file size of the rom. False advertisation.
Besides, I've never, ever seen an initial AOSP rom for a new Android version that includes GApps on XDA. Heck, I've never seen a "barebones" AOSP rom that includes GApps. I think that's quite telling.
Click to expand...
Click to collapse
Well, actually a lot of 'AOSP' roms are just 'LineageOS based but with the AOSP interface'. Even in this case some repos are based on the LineageOS repos:
https://github.com/yaap/device_oneplus_cheeseburger/commit/62baf1aa2596ecc100b36890f2245ba832ff3cfc
robertogl said:
Well, actually a lot of 'AOSP' roms are just 'LineageOS based but with the AOSP interface'. Even in this case some repos are based on the LineageOS repos:
https://github.com/yaap/device_oneplus_cheeseburger/commit/62baf1aa2596ecc100b36890f2245ba832ff3cfc
Click to expand...
Click to collapse
The device tree was created by los yes, but has been extensively reworked both in Q and R, the cheeseburger tree is just a bunch of makefiles. The common tree is the one that has most of the stuff. So its not los based with an aosp interface or anything like that lol. Its just its own thing.
Thank you for freely sharing your great work. It is much appreciated! :highfive:
poad42 said:
Working:
Camera/Video/Mic
Fingerprint
Dash Charging/USB stuff
DRM(Netflix,prime video playback)
IMS (VoWIFI/VoLTE)
RIL
Video playback
Wi-Fi
Broken:
Alert slider, Panel modes, HBM stuff (all need source side changes)
Permissive kernel
SafetyNet
Note: The ROM includes gapps with some pixel additions .
Click to expand...
Click to collapse
It's purely already amazing bro, thx
Will redo a donation soon, keep my NOS Nand Backup for trying this A11
poad42 said:
The device tree was created by los yes, but has been extensively reworked both in Q and R, the cheeseburger tree is just a bunch of makefiles. The common tree is the one that has most of the stuff. So its not los based with an aosp interface or anything like that lol. Its just its own thing.
Click to expand...
Click to collapse
1st thing first: Congrats for working so frequently to bring up Android 11 for oneplus 5 & 5t. Brother I've suggestion not to react for users who don't understand the efforts of dev's hard work, I know how much time it takes and from where that time we manage? We cut down that time from our family, our rest and by changing our sleeping pattern. It's not our business, We're doing this just for hobby not for money. But instead of appreciation getting questions. I haven't seen if anyone has asked politely that " Sir please correct barebones word because you've included GApps". Brother again I'll say don't answer to users who always seeking your writing mistakes but not measuring your efforts and hard work.
[Thread Cleaned]
As outlined in our Forum Rules:
15. Keep threads / posts on-topic
Whilst a minor amount of off-topic posting may be overlooked, the general rule is that your posts / threads must be relevant to the Forum / thread in which you are posting.
Click to expand...
Click to collapse
Please respect the wishes and decisions of the developer. You may provide constructive criticism but spewing disbelief for a feature or module that is or isn't present does not comply with the above rule.
Keep in mind there are plenty of alternatives to choose from and realize how lucky you are with a device that gets so much development love.
If you are wondering why your post was removed or edited, please feel free to drop me a PM.
Have a great day and keep it safe!
Thanks for your work mate! Great to have R for OP5. I planned to change my phone, but if I can have R as daily driver, I may wait a bit more
Do you plan to stay "barbone" or will you gradually port nitrogen's features to R?