Related
Hello guys, i recently installed the DN3 RC2 ROM and none of my XPOSED modules are working. Does any one know of a fix?
tabbishmahmood said:
Hello guys, i recently installed the DN3 RC2 ROM and none of my XPOSED modules are working. Does any one know of a fix?
Click to expand...
Click to collapse
Have you updated the framework?Open xposed installer and click on framework and then click on install/update and reboot your phone,if that's done make sure the modules you've selected a reboot is done after check marking them.
singhpratik87 said:
Have you updated the framework?Open xposed installer and click on framework and then click on install/update and reboot your phone,if that's done make sure the modules you've selected a reboot is done after check marking them.
Click to expand...
Click to collapse
Hi I fixed it by reinstalling the framework through recovery
Hi All
Today i want to share you all a simple modding file to disable annoyed Mobile Data Notification. Flash in recovery
Test on my Z5D, MM 6.0.1 rooted, deodexed.
devilmaycry2020 said:
Hi All
Today i want to share you all a simple modding file to disable annoyed Mobile Data Notification. Flash in recovery
Test on my Z5D, rooted, deodexed.
Click to expand...
Click to collapse
It would be nice if you could disable the Sync pop-up message as well when you turn it OFF/ON from the Notification.
Work for z1?
Glex01 said:
Work for z1?
Click to expand...
Click to collapse
I don't know, just try it and see. Backup before flash file.
I use an xposed module called xphoneplus to disable it. I'm using other xposed modules any way.
venomxob said:
I use an xposed module called xphoneplus to disable it. I'm using other xposed modules any way.
Click to expand...
Click to collapse
You are welcome.
venomxob said:
I use an xposed module called xphoneplus to disable it. I'm using other xposed modules any way.
Click to expand...
Click to collapse
Which module disables this plz ? Does it work in 6.0.1 ?
GryTEcHoG said:
Which module disables this plz ? Does it work in 6.0.1 ?
Click to expand...
Click to collapse
Xphone plus disables it. It works on 6.0.1. I'm currently using it on stock .575
Work on my M2 2303 5.1.1 nice.
Works on MM beta .238 Z3C (manual install)
devilmaycry2020 said:
Hi All
Today i want to share you all a simple modding file to disable annoyed Mobile Data Notification. Flash in recovery
Test on my Z5D, MM 6.0.1 rooted, deodexed.
Click to expand...
Click to collapse
Works fine by manual install.
Flashing zip did not work.
Thanks!
@devilmaycry2020,want to ask,if want remove it permanently,which apk should be edited sir?
Mirza_H said:
@devilmaycry2020,want to ask,if want remove it permanently,which apk should be edited sir?
Click to expand...
Click to collapse
It's permanent already mate. It's a easy method. If you don't want to use this method you can edit file TeleService.apk. I've tried to edit TeleService.apk before but it's seem have problem with sim card. It didn't recognize carriers network.
I use module in Xposed
DTN Disabler
https://goo.gl/tgT65g
devilmaycry2020 said:
It's permanent already mate. It's a easy method. If you don't want to use this method you can edit file TeleService.apk. I've tried to edit TeleService.apk before but it's seem have problem with sim card. It didn't recognize carriers network.
Click to expand...
Click to collapse
thanks, I just want to try it without using this overlay, but I've tried to use this overlay and it works well .
another xposed module to look into would be notify clean, works for all android notifications.
working on m4 aqua (e2306) 6.0.1
the zip is installing the overlay in /system/oem/overlay
that folder is not used in many roms, the real one is /system/vendor/overlay
that's why is not working in some models
thanks for sharing!!
sergioslk said:
working on m4 aqua (e2306) 6.0.1
the zip is installing the overlay in /system/oem/overlay
that folder is not used in many roms, the real one is /system/vendor/overlay
that's why is not working in some models
thanks for sharing!!
Click to expand...
Click to collapse
Thanks for the info. Just update the right file.
Thank you @devilmaycry2020 .. now it works on my Xperia Z2...
Hey guys. I haven't messed with Xposed framework since there was an alpha for Tab S when we got 5.0.1. I've been using the same one since.
Anyway, I'm wondering if there is a version that I should be using that is compatible. Really the only reason I need this is so that I can change the dpi for several apps.
https://www.androidfilehost.com/?fid=24591000424962808
steamrollerpark said:
https://www.androidfilehost.com/?fid=24591000424962808
Click to expand...
Click to collapse
Thanks! Is there an xda thread to keep track of this?
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Wanam xposed for Touchwiz
Thanks!
Anyone got v4a running on 9.0 with magisk?
Cowbell_Guy said:
Anyone got v4a running on 9.0 with magisk?
Click to expand...
Click to collapse
Yep :good:
https://forum.xda-developers.com/pixel-2-xl/how-to/viper-dd-atom-t3724096/post77270012
+1 via magisk module download.
madscribblerz said:
+1 via magisk module download.
Click to expand...
Click to collapse
Which module?
Cowbell_Guy said:
Which module?
Click to expand...
Click to collapse
Here's what I'm using
Cowbell_Guy said:
Which module?
Click to expand...
Click to collapse
This one
Doesn't work for me.. at least I don't see.. I don't hear any difference.. any advice?
bnbagiz said:
Doesn't work for me.. at least I don't see.. I don't hear any difference.. any advice?
Click to expand...
Click to collapse
Uninstall viper and the audio modification module. Install the viper fx module and choose original at install don't reboot. Install the audio modification module reboot. If viper has an update do this again. Hope it helps.
miked2332 said:
Uninstall viper and the audio modification module. Install the viper fx module and choose original at install don't reboot. Install the audio modification module reboot. If viper has an update do this again. Hope it helps.
Click to expand...
Click to collapse
the last time i have used viper i did not install any audio modification module. so maybe that was the problem. can you recommend one?
bnbagiz said:
the last time i have used viper i did not install any audio modification module. so maybe that was the problem. can you recommend one?
Click to expand...
Click to collapse
They're in the Magisk Module Repo.
You only need to install the modification library if you install other audio mods aside from Viper. What you might've been missing is the Audio Compatibility Patch(also in the repo). This is needed to allow all audio(such as Soundcloud that uses it's own EQ) to go through Viper. The only downside with the compatibility patch on the P2XL, it causes stuttering when 2 audio sources try to overlap each other for a good, lets say 10 seconds?
miked2332 said:
Uninstall viper and the audio modification module. Install the viper fx module and choose original at install don't reboot. Install the audio modification module reboot. If viper has an update do this again. Hope it helps.
Click to expand...
Click to collapse
..
I use this viper and have to remove and reinstall this audio mod Everytime there is a viper update. I forgot to mention I had overlap over Bluetooth about 50% of the time for the duration of use. I disabled music fx and it fixed it. For viper I choose new and original theme.
Sorry to bump an old post, but does anyone who has viper working on pie when they reboot their phone viper opens up automatically? I installed through magisk and am still on the initial release of pie. It works I just never had this happen before and curious if I'm the only one.
Fe Mike said:
Sorry to bump an old post, but does anyone who has viper working on pie when they reboot their phone viper opens up automatically? I installed through magisk and am still on the initial release of pie. It works I just never had this happen before and curious if I'm the only one.
Click to expand...
Click to collapse
You could always try this V4A version and installation. Haven't seen the issue that your reporting on this particular version and setup :good:
https://forum.xda-developers.com/pi...iper4android-compatible-t3929914/post80185220
Badger50 said:
You could always try this V4A version and installation. Haven't seen the issue that your reporting on this particular version and setup :good:
https://forum.xda-developers.com/pi...iper4android-compatible-t3929914/post80185220
Click to expand...
Click to collapse
Thank you, I'll try it out after work.
I just put this mod in with my Zip Mod Installer but since it works without having to install one of my bases I thought I would put it out here. This mod doesn't affect the navbar like my first one (where it turned black also) so you don't have to remove it if you don't want to. Flash in TWRP. A Magisk version is available also but it too must be installed via TWRP. STOCK ONLY
Regular uploaded 2-9-19
https://www.androidfilehost.com/?fid=1395089523397888331
Regular edge sense compatible (don't flash edge sense module, just install the app)
https://www.androidfilehost.com/?fid=1395089523397888333
Magisk uploaded 2-9-19
https://www.androidfilehost.com/?fid=1395089523397888329
Magisk edge sense compatible (don't flash edge sense module, just install the app)
https://www.androidfilehost.com/?fid=1395089523397888327
Tulsadiver said:
I just put this mod in with my Zip Mod Installer but since it works without having to install one of my bases I thought I would put it out here. This mod doesn't affect the navbar like my first one (where it turned black also) so you don't have to remove it if you don't want to. Flash in TWRP. A Magisk version is available also but it too must be installed via TWRP.
Regular uploaded 1-17-19
https://www.androidfilehost.com/?fid=11410963190603903070
Magisk uploaded 1-17-19
https://www.androidfilehost.com/?fid=11410963190603903075
Click to expand...
Click to collapse
Thanks for mod. Somehow the magisk version doesn't do anything on my device... It's activated in magisk but status bar stays as it was before.
Donric13 said:
Thanks for mod. Somehow the magisk version doesn't do anything on my device... It's activated in magisk but status bar stays as it was before.
Click to expand...
Click to collapse
Do you have edge sense installed?
Tulsadiver said:
Do you have edge sense installed?
Click to expand...
Click to collapse
Yes. Aha this seems the problem i think..... Any solution?
Donric13 said:
Yes. Aha this seems the problem i think..... Any solution?
Click to expand...
Click to collapse
I'll make an edge sense version when I get to work.
Donric13 said:
Yes. Aha this seems the problem i think..... Any solution?
Click to expand...
Click to collapse
Did you try edge sense after you installed my mod and uninstalled active edge module? I didn't think he did any smali editing so it should work with just using his app.
Tulsadiver said:
Did you try edge sense after you installed my mod and uninstalled active edge module? I didn't think he did any smali editing so it should work with just using his app.
Click to expand...
Click to collapse
Edgesense is still working after installation of your mod. Both modules are active in magisk. I'll try disabeling his mod and report.
No success. Disabeling his mod and edge sense app isn't working. But also your mod isn't working. Deinstalled edge sense mod (deleted modul in magisk) and reinstalled your mod. Didn't work. Here some screenshots
Donric13 said:
No success. Disabeling his mod and edge sense app isn't working. But also your mod isn't working. Deinstalled edge sense mod (deleted modul in magisk) and reinstalled your mod. Didn't work. Here some screenshots
Click to expand...
Click to collapse
You might have other modules interfering. Looks like you have quite a few.
Tulsadiver said:
You might have other modules interfering. Looks like you have quite a few.
Click to expand...
Click to collapse
Hmm... Deactivated all other modules than yours. Still no success. Maybe something still remains somewhere... Anyway thanks for your good work for all those devices. Gonna try again after a clean flash (propably next security patch....).
Donric13 said:
Hmm... Deactivated all other modules than yours. Still no success. Maybe something still remains somewhere... Anyway thanks for your good work for all those devices. Gonna try again after a clean flash (propably next security patch....).
Click to expand...
Click to collapse
Here is how you should do it after I upload a edge sense version.
Flash flash-all.bat after taking out the -w so data won't wipe.
Reboot
Boot back into bootloader
fastboot boot TWRP.img
Flash TWRP.zip
Flash Magisk uninstaller
Flash kernel if you like
Flash magiskv18
Reboot verify root
Boot into TWRP
Flash my regular edge sense mod, not Magisk version
Reboot
Proceed to install all of your modules minus edge sense module
Done
Okay. Let's flash... Gonna start already with flashing factory image to be prepared. Thanks.
Donric13 said:
Okay. Let's flash... Gonna start already with flashing factory image to be prepared. Thanks.
Click to expand...
Click to collapse
I just uploaded what should be edge sense compatible mods.
Tulsadiver said:
I just uploaded what should be edge sense compatible mods.
Click to expand...
Click to collapse
:good: working perfect. Just installed the non magisk module and now it works as intended (black status bar and edge sense) ! Big thanks. Now gonna install other modules (exept edge sense).
Tulsadiver said:
I just uploaded what should be edge sense compatible mods.
Click to expand...
Click to collapse
Hello,
thanks for making this. i tried installing for magisk and its not working for me (stock/rooted 3XL). no edge sense apps/magisk modules installed. I'm willing to try the non-magisk version, but i don't see anything in the OP about how to remove this if i don't like it.
Also, does this enable two rows of notifications like in your screenshot? Thanks!
hochoch said:
Hello,
thanks for making this. i tried installing for magisk and its not working for me (stock/rooted 3XL). no edge sense apps/magisk modules installed. I'm willing to try the non-magisk version, but i don't see anything in the OP about how to remove this if i don't like it.
Also, does this enable two rows of notifications like in your screenshot? Thanks!
Click to expand...
Click to collapse
I can give you a restore to flash. The two rows of statusbar are available in my other thread (ADB and Zip installer). If you haven't installed any modules then the regular one would be the right one.
Works great with Round Screen app from the Play Store. It's the only rounded corner overlay app I've tried that doesn't have a persistent notification. @Tulsadiver any plans on making native round corners in the mod?
widezu69 said:
Works great with Round Screen app from the Play Store. It's the only rounded corner overlay app I've tried that doesn't have a persistent notification. @Tulsadiver any plans on making native round corners in the mod?
Click to expand...
Click to collapse
It is native as is. I didn't make the screen square. All I did was change the status bar black. I've tried a few things to try and get it rounded but so far it hasn't worked.
Anybody tried this mod on february security update? I'm on holiday and cant update to february build before saturday...
Edit: seems SystemUI.apk has no changes in february update. So i think the mod will work with no issues.
SystemUI changed. So flashing this mod on february update leads to bootloop... But is no problem because now this mod seems to be integrated in flashable zips in Tulsadiver's main thread. There all is updated to february patch. So no need to update this mod.