Develop Bugs

[KERNEL] HO!NO! Palace...

To avoid mess up in tread i decide to separate kernel from Rom.
This is going to be my Kernel palace
GB Kernel V1 include:
Overclock to max stable 1836 mhz
Under-volt all frequency
New low power level (Saves ~8ma at battery for low fps apps)
Add 5 more frequency table
Use readl_relaxed and writel_relaxed
Add interactive, smartassv2, lagfree governor
Implementation of 2-Phase OnDemand
P930 Gingerbread Kernel V1 (Work on Nitro HD and Bell Optimus LTE)
SU640 Gingerbread Kernel V1
LU6200 Gingerbread Kernel V1
P930 CM9 Kernel V4
Mirror
HO!NO! GitHub

Sweet thank you ! Cant wait for a CM9 hehe
Sent from my LG-P930 using XDA

Thanks for all ur work!
Sent from my LG-P930 using xda premium

Advice
HO!NO! said:
To avoid mess up in tread i decide to separate kernel from Rom.
This is going to be my Kernel palace
GB Kernel V1 include:
Overclock to max stable 1836 mhz
Under-volt all frequency
New low power level (Saves ~8ma at battery for low fps apps)
Add 5 more frequency table
Use readl_relaxed and writel_relaxed
Add interactive, smartassv2, lagfree governor
Implementation of 2-Phase OnDemand
P930 Gingerbread Kernel V1 (Work on Nitro HD and Bell Optimus LTE)
SU640 Gingerbread Kernel V1
LU6200 Gingerbread Kernel V1
P930 CM9 Kernel to come when CM9 will be in RC stage....
Click to expand...
Click to collapse
Sir ,maybe you can improve your kernal for deep searching the cm9 kernal,hoping that would be a good resource for your ref.Meanwhile expecting your new ver Of your home-made kernal. keep up your job！

HO!NO! said:
To avoid mess up in tread i decide to separate kernel from Rom.
This is going to be my Kernel palace
GB Kernel V1 include:
Overclock to max stable 1836 mhz
Under-volt all frequency
New low power level (Saves ~8ma at battery for low fps apps)
Add 5 more frequency table
Use readl_relaxed and writel_relaxed
Add interactive, smartassv2, lagfree governor
Implementation of 2-Phase OnDemand
P930 Gingerbread Kernel V1 (Work on Nitro HD and Bell Optimus LTE)
SU640 Gingerbread Kernel V1
LU6200 Gingerbread Kernel V1
P930 CM9 Kernel to come when CM9 will be in RC stage....
Click to expand...
Click to collapse
Can u change the charging animation of LU6200 when it's power off. The original one is really ugly. Thank you very much.

great job! Thanks very much.

THX 4 UR HARD WORK 4 OUR LU su!
啤酒是必须的~

Can't wait for CM9 kernal! Anyone see an improvement in battery life with the current kernals?

Thank you for all your work in main this phone one of the best out there

HO!NO! said:
To avoid mess up in tread i decide to separate kernel from Rom.
This is going to be my Kernel palace
Click to expand...
Click to collapse
restored my phone to original att nitro hd rom, then flashed the corresponding kernel, wiped dalvik cache and rebooted.. now i dont have root access? any way to resolve this issue besides rerooting it.. the kernel shouldnt affect it right?

kumayam said:
restored my phone to original att nitro hd rom, then flashed the corresponding kernel, wiped dalvik cache and rebooted.. now i dont have root access? any way to resolve this issue besides rerooting it.. the kernel shouldnt affect it right?
Click to expand...
Click to collapse
Your original nitro rom is maybe not rooted...
And no kernel does not change one thing about root.

HO!NO! said:
Your original nitro rom is maybe not rooted...
And no kernel does not change one thing about root.
Click to expand...
Click to collapse
i rooted the stock att nitro rom with super on click, then i made a backup and thats what ive been using, everytime i flash the corresponding kernel, it says i have no root access
Edit: I just rerooted it using super one click and everything works fine now, thanks for everything

rsalan said:
Can't wait for CM9 kernal! Anyone see an improvement in battery life with the current kernals?
Click to expand...
Click to collapse
Wasn't much better than on Bell Stock ROM the first days... but now after some days with tweaking and battery calibration the best battery life i have had so far!

Cromson said:
Wasn't much better than on Bell Stock ROM the first days... but now after some days with tweaking and battery calibration the best battery life i have had so far!
Click to expand...
Click to collapse
What sort of tweaks?

rsalan said:
What sort of tweaks?
Click to expand...
Click to collapse
heres some tweaks
http://androidforums.com/triumph-al...-performance-tweaks-updated-04-03-2012-a.html
http://forum.xda-developers.com/showthread.php?t=1560588
http://forum.xda-developers.com/showthread.php?t=1227269
http://forum.xda-developers.com/showthread.php?t=1289554

init.d support
Any chance of adding init.d support? I have a set of sick tweaks that really promotes battery life and performance.
However, I can only install part of it (manually).

thomas.raines said:
Any chance of adding init.d support? I have a set of sick tweaks that really promotes battery life and performance.
However, I can only install part of it (manually).
Click to expand...
Click to collapse
init.d support is already in my rom, this is why i don't see important to make it native in the first version.
In next release it will be native.

Thank you very much

HO!NO! said:
init.d support is already in my rom, this is why i don't see important to make it native in the first version.
In next release it will be native.
Click to expand...
Click to collapse
Which ROM? I installed Kernelpan1c Nitro HD ROM and my wife is liking it very much (it's her phone). But she wants me to hook it up with my init.d scripts as she knows how much battery life and performance is improved. However, when I tried to add the init.d forlder manually, the phone soft bricked. I guess I should post this in the ROMs thread, but I am using this kernel, and as far as I knew, in order for init.d scripts to work, your kernel has to be compatable.

I love this kernel but I love to use cm9.
I know the developer here wants to wait cm9 to rc stage in order to make the kernel for cm9, I would like to ask if you can change your mind cos cm9 original kernel is so lagging. Pls help!
Sent from my LG-P930 using xda premium

(KERNEL) Team Pecan Kernel V2 For LG Optimus Me P350

TEAM PECAN V2 KERNEL FOR LG OPTIMUS ME P350
HEY USERS BROUGHT TO YOU LATEST LG KERNEL V10i V2 THIS IS COMPILED FROM SOURCE. THIS IS FIRST FROYO MODDED KERNEL FULLY HACKED THIS IS V2 AS I ALREADY GIVEN THE FEATURES SAME THINGS IT HAVE BUT ONE MORE FEATURES ADDED IS MODDED SO IT TOOKED MORE IT IS BEST KERNEL FOR LG PECAN. GUYS YOU WILL SURELY ENJOY THIS KERNEL ALL THE FEATURES OF V2 AS LISTED ALREADY
FEATURES OF V2 :
MODDED KERNEL FULLY HACKED KERNEL SOURCE
KERNEL SOURCE : 2.6.32.9 FULLY MODDED (HACKED) ( THANKS TO RON)
LG V1Oi SOURCE CODE
FASTEST KERNEL EVER FOR FROYO OR CM6
WIFI FULLY STABLE
LATEST MODUELES
OVERCLOCKABLE AT 844 (THANKS TO RON)
NEW GOVERNOR SMARTASSV2 ( THANKS TO RON)
BUGS :
NO BUGS AT ALL
Link to Source Code of Kernel : http://github.com/teampecan
LINK FOR TEAM PECAN V2 KERNEL : http://www.mediafire.com/?r95w2z6lwi6by80
GUYS THIS IS SUPERB KERNEL FULLY STABLE BETTER THAN DRAP KERNEL SPECIAL THANKS TO RON GOKHLE. TRY IT ONCE BEST FOR FROYO LOVERS
Guys If You Think I helped You Plz press Thanks Button On my XDA​

this is froyo kernel but good to post with addition of performance from v10i can u give me a link for v10i.kdz ? thanks in advance

#venkat v10i.kdz is not released lg just released it's sources i compiled it
#venkat v10i.kdz is not released lg just released it's sources i compiled it from sources of v10i bro can u help me in adding new governors and overclocking any kernel as im new to this stuff

kdmaru said:
#venkat v10i.kdz is not released lg just released it's sources i compiled it from sources of v10i bro can u help me in adding new governors and overclocking any kernel as im new to this stuff
Click to expand...
Click to collapse
hmmm i know how to compile the kernel and i am too getting learn of adding governors and i will surely help u on that work almost i learned it overclocking is easy

So venkat bro can u teach me overclocking my v10i kernel
Sent from my LG-P350 using XDA

wow no one need this kernel? no comment,no thanks ( that 1 thanks is my) well i wasted my time to add 844mhz and new gov on kernel

Rite Bro Now Im much Disappoint

Guys nO rEPLY nOTHING VEERY MUCH DISAPPOINTEED :'(

gUYS PLZ POST UR REVIEWS !

Does it work for cm7?
Sent from my XPERIA X8 using Tapatalk 2

It works With CM7 but Wifi Will not Work !!

rom2maru said:
It works With CM7 but Wifi Will not Work !!
Click to expand...
Click to collapse
I send grats from Poland
i used this kernel, its really nice ...
governor smartassv2 works for me fine
for now i thank U for the good work
peace
PS . wifi works fine for me, like others stuff

bernardblack76 said:
I send grats from Poland
i used this kernel, its really nice ...
governor smartassv2 works for me fine
for now i thank U for the good work
peace
Click to expand...
Click to collapse
you used on cm7?

ron gokhle said:
you used on cm7?
Click to expand...
Click to collapse
no, im used this at froyo 2.2.2 v10a ... once i have a CM, some old version, i dont like it .. i kno, im the only one ... i wait for a NIghtly with this .35 kernel
- back the topic: OC 806MHz stable, antutu benchmark passed etc - i will test higher later
- wifi works perfectly, and i supose wifi responds a little quicker then on oryginal kernel
- rest i see is working with no bugs
- OC with antutu CPU Master
- battery life with no bigger drain
thx ron

Ok ron good work, the phone is a little better but on games it lags is the kernel or the rom stock v10e?

This is a bit off-topic but kinda relevant. Here's the deal, somewhere I read that V10I is not rootable, so just to confirm, up to which version of stock rom is rootable? V10G? Wanna go back to stock rom, root, load kernel (making it relevant)...

So I just went ahead and played safe... Flashed V10G, rooted it and installed the kernel... All I can say is thanks! Blazing fast even the first day it wasn't overclocked... Dont run benchmark tests, I dont trust them, but compare experiences, and by far this is the best!

I'm testing this kernel with Froyo 2.2.2. Do you planning to release kernel v3? Battery life is still bad.
Thanks.
Sent from my LG-P350 using Tapatalk 2

nikolaiffb said:
I'm testing this kernel with Froyo 2.2.2. Do you planning to release kernel v3? Battery life is still bad.
Thanks.
Sent from my LG-P350 using Tapatalk 2
Click to expand...
Click to collapse
How long does it lasts on your device? My batt can go for day and a half on normal usage...

dbarrera said:
How long does it lasts on your device? My batt can go for day and a half on normal usage...
Click to expand...
Click to collapse
Same to me but battery is drying at night while I sleep.
12% was consumed in 8 hours of sleeping.
Maybe Dev of kernel can add more Governors, like ondemandX, interactiveX.
Edit : I changed governor to conservative and now it's a bit better.

[KERNEL][CM9,Cm10] AminKernel Series

AminKernel Series For the Nozomi (Xperia S)​
Introduction:
This Kernel is based of Latest Sony Sources, Reworked by Cm/Fxp....it's made for Cm9 and Cm10 and both Versions includes Latest Cm Ramdisks...I'll try to always keep this kernel up to date with latest Sony and Cm/Fxp sources...The Goal is to make the Fastest, Best and Most Optimized Kernels For This Device...many Hacks will be added to this kernel to make it fly high Faster and optimized...it'll be open source so everyone is welcomed to join me and work on it...
Features:
Drived from fxp Sources
Swap Support
Deadline sched
Cfq sche
Swiqi Support
Wake lock Support
Ntfs , Ext3 ,Ext4
Unlocked many Cpu Freq
Cpu Voltage Table
Cpu OC Upto 1912000
Set Default Freqs to 192000-1566000 (ramdisk)
Gpu OC
.
.
.
Downloads:
not avail for now

reserved

Great
Great to see some modified kernels for CM again
When can we see the CM10 kernel rolling out?

Poesini said:
Great
Great to see some modified kernels for CM again
When can we see the CM10 kernel rolling out?
Click to expand...
Click to collapse
cm10 kernel uploaded...
it will be way more than just a modified kernel trust me

Flashable zip for CM10 available?
Sent from my Jellybean Xperia S

CM10 kernel not booting...
Flashes okay, recovery works but it just hangs with the white LED strip on the bottom lit

May I use kernel CM9 with stock rom of sony?!

dmh1 said:
May I use kernel CM9 with stock rom of sony?!
Click to expand...
Click to collapse
This is so wrong in many ways...
CM kernels are not to be used on stock Sony ROMs...
BTW, confirmed CM10 kernel not booting, just flashed back FXP 147 kernel and it booted normally

Poesini said:
CM10 kernel not booting...
Flashes okay, recovery works but it just hangs with the white LED strip on the bottom lit
Click to expand...
Click to collapse
it must be max freq...the device can't handle max freq on boot , I have set default freq on safe values in cm9's ramdisk but not in cm10...did you test cm9 kernel?
thank you for testing
dmh1 said:
May I use kernel CM9 with stock rom of sony?!
Click to expand...
Click to collapse
I'm releasing another one for stock...

No i haven't tested CM9 kernel because i'm not using CM9 anymore
NP, i love to test

dmh1 said:
May I use kernel CM9 with stock rom of sony?!
Click to expand...
Click to collapse
I made a new thread for stock version:http://forum.xda-developers.com/showthread.php?t=2007276

What happened to the kernels?

Poesini said:
What happened to the kernels?
Click to expand...
Click to collapse
Maybe being updated new kernel came with stock .55 update
Sent from my LT26i using xda premium

When to except cm9 kernel download link????
Sent from South Africa using Sony Xperia S

precardo said:
When to except cm9 kernel download link????
Sent from South Africa using Sony Xperia S
Click to expand...
Click to collapse
How about right now?
here you go guys!
these are for cm9 !!!
the .elf
The Zip
but this is a test version!...so once you test it please come here and report!

Waiting for cm10 version,
Happy to see this new family kernel.
I guess it will rock!

ok this is test version for Cm10!
http://www.mediafire.com/?3v00hwa735st0ws
please test and report!
and don't ask for zip file.

Cm10 kernel download
Cwm versión
Thanks

CM9 Kernel showing washed out colors from boot kernel boot screen

cm 10 kernel is not working
after the recovery stage light up
then the lcd goes black(turned of) and the led bar light up
and....bootloop
using cm147
thx for your kennel anyway:]

(Q) Which Kernel?

Which kernel is best and most stable to use with stock ROM as I'm new to this device just seeing what other users opinions are that have been using it for some time.
Also does Odin have to be used for flashing is can it be done threw the standard procedure of going into recovery and flashing via install zip?
Thanks in advance
Sent from my GT-I9195 using Tapatalk

Most stable is the kernel by arco68 made for rooted stock roms.
Yes, some kernels can be flashed via CWM provided they are the correct format.

Whosat said:
Most stable is the kernel by arco68 made for rooted stock roms.
Yes, some kernels can be flashed via CWM provided they are the correct format.
Click to expand...
Click to collapse
Would you be able to link that kernel thread as the 1 I have found closest to that was 1 based on arco68 kernel.
Thanks again for the help and responses much appreciated.
Sent from my GT-I9195 using Tapatalk

Scopewiz said:
Would you be able to link that kernel thread as the 1 I have found closest to that was 1 based on arco68 kernel.
Thanks again for the help and responses much appreciated.
Sent from my GT-I9195 using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=43622999
Optional: Flash GT-I9195_Kernel_v1.zip to use a custom stock kernel, which might fix battery drain for some.
Kernel changelog: https://github.com/arco/android_kernel_samsung_msm8930-common/commits/stock
Click to expand...
Click to collapse
Its an attachment in the post

I noticed that before as I used that guide for rooting but was looking for a kernel with a few more features but if this is the best to date I'll stick with that, thanks again.
Sent from my GT-I9195 using Tapatalk

You're looking for stability so that's the most stable.
I'm personally using f4ktion's 1.3.6 but that version is currently only for AOSP roms. Sticking with Samsung stock roms you only have f4ktion's 1.3.0 to play with but some have reported that its features (BLN) are not working.

Vikinger Kernel is based on arcos modified stock kernel with the extra of bln-feature. Should be as stable as arcos. Never faced unstability and I am using it since release

junkyde said:
Vikinger Kernel is based on arcos modified stock kernel with the extra of bln-feature. Should be as stable as arcos. Never faced unstability and I am using it since release
Click to expand...
Click to collapse
Are you talking about his kernel? http://forum.xda-developers.com/showthread.php?p=47893414
Sent from my GT-I9195 using Tapatalk

yes

My favourite would be F4ktion's, and I spent the last week on it.
Unfortunately the wifi seems to be broken - works at first, but sooner or later (typically within a few hours) something happens, phone becomes hot, wifi can't be switched off, and everything becomes laggy.
Battery will last two-three hours once that happens and the phone will blame wifi for 90% of battery usage.
Only reboot fixes it, until it happens again.
During the last week I was experimenting with different solutions such as using stock's configuration files (the stuff under etc/firmware/wlan/prima) as well as trying to replace the prima kernel module from other kernels. Nothing helped.
(well, most of my attempts made wifi not work lol, the few that worked didn't fix the problem)
If anyone has any ideas what else to try, it would be great -- the kernel was great otherwise (after lowering minimal frequency down to 160-ish MHz battery prediction exceeded 6 days, and that's before I undervolted anything).
In the meantime I'm on Vikinger's kernel - not because I use its features but because installing it was the easiest way to get wifi working again,

Does Vikinger's custom kernel support performance control where you can change clock support etc?
Sent from my GT-I9195 using Tapatalk

Scopewiz said:
Does Vikinger's custom kernel support performance control where you can change clock support etc?
Click to expand...
Click to collapse
No
No clock change beyond what stock has, no undervolting.
It doesn't have any interesting governors either.

like I said. It's just arcos kernel with the extra of bln support. you could have get that information from the first post of the vikinger kernel thread. all features are mentioned there

[HELP] conservative/ondemand settings revert after screen lock

Hello everybody,
I'm having a hard time keeping my settings for the two governors. Kernel is stock, I'm using interactive for the little cores and want either conservative or ondemand for the BIG cores. Problem is, the settings keep reverting after locking the phone and waiting like 30 seconds. I tried both the EX Kernel Manager and Kernel Adiutor apps, so it shouldn't be it.
Any suggestions? I would really appreciate your help!
Thanks in advance.

MeggaMortY said:
Hello everybody,
I'm having a hard time keeping my settings for the two governors. Kernel is stock, I'm using interactive for the little cores and want either conservative or ondemand for the BIG cores. Problem is, the settings keep reverting after locking the phone and waiting like 30 seconds. I tried both the EX Kernel Manager and Kernel Adiutor apps, so it shouldn't be it.
Any suggestions? I would really appreciate your help!
Thanks in advance.
Click to expand...
Click to collapse
I have never tried anything with the stock Kernel but Yes EX Kernel & Blu_Spark Kernels are the best out there. You can try them & they give much updates to them & are very much stable for Daily Use.

qasimtb said:
I have never tried anything with the stock Kernel but Yes EX Kernel & Blu_Spark Kernels are the best out there. You can try them & they give much updates to them & are very much stable for Daily Use.
Click to expand...
Click to collapse
Thank you for the answer, I have tried elementalx and the problem is still there, any way you can test this on the current kernel you are using? Thanks