Hello,
Is there anybody who has succes with using a 64gb sd card?
This isn't working, https://www.youtube.com/watch?v=JA9fp863d-o
Best regards,
Mark
Yes, I have used a strontium 64GB SD card with FAT32 fiel system and it works normally in Ascend p6.
Most likely any 64GB SD card should work.
downbc1 said:
Yes, I have used a strontium 64GB SD card with FAT32 fiel system and it works normally in Ascend p6.
Most likely any 64GB SD card should work.
Click to expand...
Click to collapse
Yes use this http://www.ridgecrop.demon.co.uk/index.htm?fat32format.htm
I bought a 32Gbytes SD card and it came with ex-fat file system. P6 didn't recognize it, so I format it on fat32 file system and everything was fine since then.
Enviado desde mi P6-U06 mediante Tapatalk
Hello,
That didn't work. The sd card is working fine in my windows pc. Any other sugestions?
Mark
internetuser2004 said:
Hello,
That didn't work. The sd card is working fine in my windows pc. Any other sugestions?
Mark
Click to expand...
Click to collapse
Try this http://www.easeus.com/partition-manager/ its free and format it it to fat32 make sure its a primary partition and that its active
Try it with another ROM, just to test.
Make backup before of all with TWRP.
If you have the same problem, probably the vendor is not compatible in cert way with P6, try to return the SDCARD to seller and explain the sittuation, maybe they change your card to another.
If the problem persists, maybe is a problem in your phone, and that need to been talked with Huawei.
Hope this helps somehow, sorry about bad english
SD card problems
Donno about 64GB,i'm having problem even with my 32GB SD card,every time i restart my smart sd card error message appears -"SD card is damaged.Try reformatting it."After formatting it works ok till the next restart.
Does anybody have the same issue with SD?I guess it's firmware's problem,but not sure,i'm running B708 neoarnet repack or it's just SD card broken and i need to change it?
I'm using a 32gb Samsung evo microsd. Never had any problems with it. I'm on b708 too.
Sent from my P6-U06 using XDA Free mobile app
wards5150 said:
I'm using a 32gb Samsung evo microsd. Never had any problems with it. I'm on b708 too.
Sent from my P6-U06 using XDA Free mobile app
Click to expand...
Click to collapse
Same here. On B709.
Sent from my SM-G850F
You have to format the card USING THE PHONE, not the pc.
Sent from my HUAWEI P7-L10 using XDA Premium HD app
My P6 worked with a 64GB card with some formatting but it turned out to be a fake card
Im using a 64 gb card
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But when I formatted with the phone I experienced issues, I had to use a pc software called. Mini tool. Partition magic and. I formatted the card with fat32 file system, now works flawlessly
Related
Relatively new Android user, running stock EL29 Gingerbread rooted with ClockworkMod on a Samsung Epic 4G Touch (Sprint). I have had major problems with my phone continually rebooting which I'm pretty sure I've confirmed is due to having too many apps moved to the external SD card with the stock App2SD command.
I've read that the only workaround for this is to use Link2SD with a second external SD card partition. I have been trying for many hours to get this working, but Link2SD will never recognize my second partition. I've tried many different options with formatting the external SD card, but nothing ever works.
I've found some posts on this site by d12unk13astard that I read to indicate that Link2SD won't work on the Epic 4G Touch because of the way the internal memory is formatted on this phone. Can anyone confirm that Link2SD can or cannot be used on the Epic 4G Touch? If it can, any idea how I can get it to recognize my 2nd partition? Any help is VERY MUCH appreciated!
I talked to the guy who made link2sd and gave him a logcat of a command he wanted me to type in terminal, still waiting on a confirmation or solution to this problem as well. I would suggest you also ask about this in the Android section of xda under apps/games. Hopefully an update to link2sd will fix our issue were having.
Sent from my SPH-D710 using xda premium
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rsngfrce said:
Will Link2SD work on the Samsung Epic 4G Touch? I am using stock EL29 Gingerbread rooted and Clockworkmod installed. No matter what I have tried (and I've been trying for MANY hours...), I cannot get Link2SD to recognized the 2nd SD card partition. I have followed directions and suggestions from many sources, over and over, but never is the 2nd SD card partition recognized.
Click to expand...
Click to collapse
This^^
Heres a couple pics proving why this app has not been working for our phones(epic 4g touch)
As I thought, link2sd can only see our internal memory card that Samsung has put in our phones mounted as /sdcard. Instead of our external sdcard which has the 2nd partition needed for link2sd to work.
Since the internal memory being mounted as /sdcard cant be partitioned link2sd fails to work. As you can see it fails to see my external 32GB class 10 sdcard on link2sd app.
Sent from my SPH-D710 using xda premium
Sent from my SPH-D710 using xda premium
Directory bind might be able to help. Just search it and read up on it.
Sent on HyDrA using Tapatalk 2
killaphatboy said:
Directory bind might be able to help. Just search it and read up on it.
Sent on HyDrA using Tapatalk 2
Click to expand...
Click to collapse
Tried that already still dont work. Thanks for your input tho.
Sent from my SPH-D710 using xda premium
I'm not sure what the problem is here. I'm running CM9A6 via the RobotoMod 1.0.2 ROM, and I couldn't get the default S2E to work at all. I installed link2SD as a workaround, and while I know it has it's limitations, I can't determine why it won't link an app.
I downloaded Where's my Perry? for my kids, and due to it's size (50+ MB), I wanted to get it out of my internal storage. It isn't working, though - link2SD is throwing an error saying there's "insufficient storage". I'll let the screenshots speak for themselves:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Perry?free is already on the SDCard. You are trying to install it to internal memory and then getting Link2SD to link it back to the SDCard. As you only have 51.18MB free on your internal storage and Perry?free is 52.73MB it won't work. Leave it where it is.
Dan in SA said:
I'm not sure what the problem is here. I'm running CM9A6 via the RobotoMod 1.0.2 ROM, and I couldn't get the default S2E to work at all. I installed link2SD as a workaround, and while I know it has it's limitations, I can't determine why it won't link an app.
I downloaded Where's my Perry? for my kids, and due to it's size (50+ MB), I wanted to get it out of my internal storage. It isn't working, though - link2SD is throwing an error saying there's "insufficient storage". I'll let the screenshots speak for themselves:
Click to expand...
Click to collapse
Hi,
For CM9, use Ext4 on 2nd partition on SDcard. Do you have it?.
Link2sd was working fine with me when I had CM9Alpha7. Try only with Link2sd(don't have multiple SDcard apps).
Select 'Autolink' on Link2sd settings. If you do right, all apps will be installed on SD card.
Senthamil said:
Hi,
For CM9, use Ext4 on 2nd partition on SDcard. Do you have it?.
Link2sd was working fine with me when I had CM9Alpha7. Try only with Link2sd(don't have multiple SDcard apps).
Select 'Autolink' on Link2sd settings. If you do right, all apps will be installed on SD card.
Click to expand...
Click to collapse
2nd part is formatted Ext2. It works fine other than this one program, and I have it configured to install to SD.
I'll try linking just the dalvik-cache and library, and see if that works, leaving the app on the SD card.
Senthamil said:
Originally Posted by Senthamil View Post
Hi,
For CM9, use Ext4 on 2nd partition on SDcard. Do you have it?.
Link2sd was working fine with me when I had CM9Alpha7. Try only with Link2sd(don't have multiple SDcard apps).
Select 'Autolink' on Link2sd settings. If you do right, all apps will be installed on SD card..
Click to expand...
Click to collapse
If you bothered to look at the images provided by the OP, you will see that Link2SD is working fine. Changing the partition to Ext4 will not magically create more internal space.
See tats the problem wit link2sd. I used it for a long time after using data2sd. Now I'm back to daya2sd. It may boot slower but it gives u happiness.
Sent from my HTC Wildfire S A510e using Xparent ICS Tapatalk 2
******* picture upload bug. Why won't xDA Fix it?
Sent from my HTC Wildfire S A510e using Xparent ICS Tapatalk 2
Hey guys,
Just got my new microSD card (64GB) and when I went to put it in the S3, it said that it was damaged and needed to be formatted. Formatting didn't work on the phone so I read up on the issue and someone suggested formatting it with EaseUS Partition tool. Did so ... formatted to FAT32. When I then insert into the phone, no issues ... or at least no warnings.
Put on a test video file and insert into the phone and use Root Explorer to go to external_sd in the root menu ... nothing shows up.
Any thoughts?
AOKP JB Milestone 1
I'm not completely sure about this but I think the 64gb cards need to be formatted as exFat, which I believe only stock touchwiz kernels support. So if I'm right you can't use it with an aokp or CM rom. Like I said though, I'm not totally sure about it.
Sent from my SGH-T999 using xda app-developers app
Found a solution.
1. Download and install EaseUS Partition Master (http://www.partition-tool.com/download.htm). I used the Home Edition. One slight thing to note is that EaseUS asks you for a series of things to do to the SD card before it actually does them. So you tell it to delete a partition, create a partition, format it a specific way and THEN you apply all the actions and it runs it like a batch file.
2. Delete any existing partitions on the SD card.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Create a partition
4. Create the partition as the Primary Partition and set the File System as FAT32
5. Apply the changes
6. Choose Yes
You should now be able to plug the MicroSD card into your S3 and have it recognized. If you are using Root Explorer, you can find your external SD card in the root menu under ... you guessed it ... external_sd.
Hope this helps. Cheers
Thanks for posting your solution! Definately good to know you can use the 64gb card this way. Could've sworn id seen folks say it had to be exFat, but I'm glad you put that rest for me!
Just to be sure though, you can see the full available storage correctly?
Thanks again and glad you got it figured out. :thumbup:
Sent from my SGH-T999 using xda app-developers app
DocHoliday77 said:
Thanks for posting your solution! Definately good to know you can use the 64gb card this way. Could've sworn id seen folks say it had to be exFat, but I'm glad you put that rest for me!
Just to be sure though, you can see the full available storage correctly?
Thanks again and glad you got it figured out. :thumbup:
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Yes, I can see the full available storage capacity. It currently shows as 249.88MB used (2 video files) and 59.22GB free. The missing space is normal due to the drive manufacturers claiming larger capacities than is actually usable.
Not to thread jack or anything, I figured it was relevant to the topic instead of making a new one. I'm having the same exact issue, except my card isn't 64gb its only 4gb. I formatted to fat32 and the phone acts like it wants to load, but Doesn't do anything.
Any idea or suggestions? Should I change to the stock kernel? I'm on liquid smooth rc7 btw.
Sent from my Samsung Galaxy S3 via Tapatalk
SimeonAS89 said:
Not to thread jack or anything, I figured it was relevant to the topic instead of making a new one. I'm having the same exact issue, except my card isn't 64gb its only 4gb. I formatted to fat32 and the phone acts like it wants to load, but Doesn't do anything.
Any idea or suggestions? Should I change to the stock kernel? I'm on liquid smooth rc7 btw.
Sent from my Samsung Galaxy S3 via Tapatalk
Click to expand...
Click to collapse
You could give that a shot, but I can't think of any kernel not supoirting fat32.
You could also try using the sd formatter tool from www.sdcard.org
Or try what the op did to get his 64gb card working.
Sent from my SGH-T999 using xda app-developers app
When trying to perform a backup with clockworkmod recovery I get a error message saying
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Checked mounts and can't mount sd card
Link to log I posted
http://forum.xda-developers.com/showthread.php?p=34141417
Please help
I bet your card is formatted exFAT.
Cwm and twrp dont support this im afraid.
Sent from my SGH-T999 using xda app-developers app
DocHoliday77 said:
I bet your card is formatted exFAT.
Cwm and twrp dont support this im afraid.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
What should I do?
s_special said:
What should I do?
Click to expand...
Click to collapse
You'll need to reformat the card to Fat32. This of course will wipe it clean, so id take it out of the phone and plug into the computer, and back up any important data. Then format to FAT32. You can format on the phone, so it may be best to do it that way.
What size is the card?
DocHoliday77 said:
You'll need to reformat the card to Fat32. This of course will wipe it clean, so id take it out of the phone and plug into the computer, and back up any important data. Then format to FAT32. You can format on the phone, so it may be best to do it that way.
What size is the card?
Click to expand...
Click to collapse
Isn't it the internal sd storage?
I have a 32gig external sd
Ooops.....my bad!
disregard previous posts. Sorry bout that!
Try deleting the .android_secure folder as is mentioned here: http://forum.xda-developers.com/showthread.php?t=1908178
If that doesnt work, I would suggest trying TWRP instead of CWM.
How much space is left in your storage?
DocHoliday77 said:
Ooops.....my bad!
disregard previous posts. Sorry bout that!
Try deleting the .android_secure folder as is mentioned here: http://forum.xda-developers.com/showthread.php?t=1908178
If that doesnt work, I would suggest trying TWRP instead of CWM.
How much space is left in your storage?
Click to expand...
Click to collapse
5 gig free in internal
s_special said:
5 gig free in internal
Click to expand...
Click to collapse
Thats pkenty, obviously.
Did you try removing that folder? Id copy it to external just so you have it still. Its hidden toi so youll have to enable show hidden folders in your file browser.
Sent from my SGH-T999 using xda app-developers app
DocHoliday77 said:
Thats pkenty, obviously.
Did you try removing that folder? Id copy it to external just so you have it still. Its hidden toi so youll have to enable show hidden folders in your file browser.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I deleted the folder but I'm pretty sure the backup file produced isn't right at 21mb.
Damn I need to figure this out
Its fine. Cwm works differently now. The 1st backup will be a full backup. All subsequent ones wikk only backup whats changed.
Not sure how good it is. I use twrp personally.
Sent from my SGH-T999 using xda app-developers app
After I installed IceJelly rom my SD card was formatted
So I was transfering my music back when suddenly I got a "No space" error
I checked the SD cards properties, and it said all my 25GB are taken
I went into the SD card and checked properties of each and every folder in there, and well, It adds up to about 6GB :3
Whats taking my space?
Pic:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In android 4.2.1 the sd card handling has been changed. Now default folder sdcard/0 . So no space on sdcard itself.
Sent from my HTC One X using xda premium
{< r o N o $ said:
In android 4.2.1 the sd card handling has been changed. Now default folder sdcard/0 . So no space on sdcard itself.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
There is no '0' fodler :3
SrebX said:
There is no '0' fodler :3
Click to expand...
Click to collapse
Is it IceColdJelly on 4.1.2 or 4.2.1 version of Android?
Sent from my HTC One X using xda app-developers app
ViktorN said:
Is it IceColdJelly on 4.1.2 or 4.2.1 version of Android?
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
4.2.1 version
Here's a picture:
Sent from my HTC One X using xda app-developers app
Some folders may show incorrect space usage, try mounting as usb from recovery and checking on a computer,
if it still shows as 6GB then something is wrong with your SD formatting or the software, and you need to re-install the rom wiping everything
Vcek said:
Some folders may show incorrect space usage, try mounting as usb from recovery and checking on a computer,
if it still shows as 6GB then something is wrong with your SD formatting or the software, and you need to re-install the rom wiping everything
Click to expand...
Click to collapse
Thats a good idea, why didn't I think of it? ><
Anyway thanks a lot it really helped me
Apparently I wasn't able to see anything inside my SD card out of the '0' folder, therefore not being able to see the '0' folder, and since it was recognized in my computer as a media device, not mass storage, I wasn't even able to see it in the computer :|
So I'm transfering all my sd card content into '0' folder
Thanks this should pretty much solve it
Though, why the hell is my device recognized as a media device and not mass storage USB? ><
Support for mass storage mode was dropped in Android 4.2. For now on you can use MTP.