Develop Bugs

[KERNEL 3.1.10] HTC JB Base 3.17.xxx.x Stock & MIUI

Hi there,
lately there have been OTA updates for CID HTC__023 and TELNZ001 which brought a new base (3.17) and some troubles (touch not responding) when using old (3.14) based custom roms.
The OTA brought a hboot update including an update to the touchscreen controller and therefore it only works correctly when using the corresponding 3.17 base kernel.
As slowly various CIDs are getting OTA updates to new base with new touchscreen controller firmware, these devices will have touchscreen issues on 3.14 based roms. But this kernel will help those people out.
adamnz had the initial idea in the thread linked above to try the 3.17 kernel on a 3.14 rom, so I followed up and created a flashable zip with all neccessary modules for those who are stuck with stock HTC ROM atm.
As I am running sense based RD-MIUI, I created a MIUI compatible boot.img, too which incorporates some ramdisk tweaks as init.d-support (busybox run-parts), volume-wake-deep-sleep-fix and run shelld service to prevent MiuiHome FCs.
03.02.2013: Base 3.17.781.2 (CID TELNZ001)
Grab the flashable zip from here: endeavoru_base_3.17.781.2_kernel.zip
Thx to adamnz for providing the OTA file and yumcimil for a full nandroid backup. :highfive:
Base 3.17.728.1 (CID HTC__023)
Grab the flashable zip from here: endeavoru_base_3.17.728.1_kernel.zip
Infos on different boot images
boot.img is the fully untouched 3.17 stock kernel while boot_miui.img has some tweaks as described above.
As the tweaks in boot_miui.img should have no drawbacks when used with non-miui-rom (and users reported that the stock one does not work but the miui one does),
boot_miui.img is the prefered kernel even when not running MIUI (if you do not want to repack).
Repacking
As JB sense roms around use the HTC stock kernel, which ramdisk is quite the same compared to this kernel, you can easily repack this kernel with the one from your favourite ROM. Please use the boot.img for this instead of boot_miui.img and do not forget to flash the zip file with the modules. This way you get all the rom-specific features and tweaks the rom chef included in his ramdisk.
Installation
Make a nandroid before, flash zip from recovery, flash boot.img from within the zip via fastboot, wipe cache and reboot.

Re: [KERNEL][Base 3.17.728.1] HTC JB Stock & MIUI
Thanks for this!
Sent from my One X running Blade v4.6.0. At a mere 240 MB, with tons of AROMA Mods and tweaks, this, is what you want.

Confirmed working with ViperX 3.3.2 using boot_miui.img, on HTC__023.
Touch works
cheers

Working with insert coin 15.1.1 with vid HTC_001!!

fantastic!

Works very well with Blade v4.6.0 (de-sensed) on HTC__023. Battery drain is less than 0.5% per hour in deep sleep.

[KERNEL][Base 3.17.728.1] HTC JB Stock & MIUI
marcosorano said:
Working with insert coin 15.1.1 with vid HTC_001!!
Click to expand...
Click to collapse
Yeah, this kernel works with all CIDs, but there are no real improvements. At least I did not notice any.
But for those with CID 023 and latest OTA update (3.17) this kernel allows them to use 3.14 based roms again. :good:
@all
Thanks for trying this one out and reporting back. Really much appreciated.

hi, i have touchscreen problems. part of my touchscreen not working. but im on 3.14.720 stock rom. and i didn't get the update yet. i want to try this flashable zip. what should i do? does the update fix touchscreen problems?

nevermore6990 said:
hi, i have touchscreen problems. part of my touchscreen not working. but im on 3.14.720 stock rom. and i didn't get the update yet. i want to try this flashable zip. what should i do? does the update fix touchscreen problems?
Click to expand...
Click to collapse
You would need to unlock your bootloader via htcdev, flash custom recovery and then flash the kernel zip in recovery and the kernel image in bootloader with fastboot.

nevermore6990 said:
hi, i have touchscreen problems. part of my touchscreen not working. but im on 3.14.720 stock rom. and i didn't get the update yet. i want to try this flashable zip. what should i do? does the update fix touchscreen problems?
Click to expand...
Click to collapse
What CID do you have?
The offical 3.17 base update only rolled out for CID HTC_023 atm. As this update brought something new to the touchscreen controller, this 3.17 kernel is needed to run 3.14 based roms.
If you have a CID different from HTC_023 (OR did not yet installed the official 3.17 OTA), running this kernel will not change anything regarding to your problem. But of course you can try, it will not cause any harm. Just follow the instructions in OP.
EDIT: Just overread the STOCK in your post. Need to grab a cup of coffee.
But gffmac is right: Just need to mention that unlocking the bootloader will wipe your /data-Partition (userdata).

nevermore6990 said:
hi, i have touchscreen problems. part of my touchscreen not working. but im on 3.14.720 stock rom. and i didn't get the update yet. i want to try this flashable zip. what should i do? does the update fix touchscreen problems?
Click to expand...
Click to collapse
It's unlikely to fix a touchscreen problem that was present on a stock rom especially if you haven't unlocked it previously. You maybe have a hardware problem with it

JohnnyInBriz said:
It's unlikely to fix a touchscreen problem that was present on a stock rom especially if you haven't unlocked it previously. You maybe have a hardware problem with it
Click to expand...
Click to collapse
Absolutely... Did not even think about that...
REALLY need to grab a cup of coffee. Now! :silly:

hi man!
can i use this kernel on my HOX?
ROM:Nocturnal JellySense+ v5.0 (3.14)
CID: HTC_044
thanks for reply

mrberni said:
Yeah, this kernel works with all CIDs, but there are no real improvements. At least I did not notice any.
But for those with CID 023 and latest OTA update (3.17) this kernel allows them to use 3.14 based roms again. :good:
@all
Thanks for trying this one out and reporting back. Really much appreciated.
Click to expand...
Click to collapse
With the stock kerneli ave some touchscreen problem when connected to usb now with your kernel it's solved

omer_hyltz said:
hi man!
can i use this kernel on my HOX?
ROM:Nocturnal JellySense+ v5.0 (3.14)
CID: HTC_044
thanks for reply
Click to expand...
Click to collapse
This kernel should work with every jb sense based rom.

marcosorano said:
With the stock kerneli ave some touchscreen problem when connected to usb now with your kernel it's solved
Click to expand...
Click to collapse
Really glad to hear that it helped you out. :highfive:

can this be worked on h boot unsupported version too or its just for the people who are already updated their h boot ??

Nani2000 said:
can this be worked on h boot unsupported version too or its just for the people who are already updated their h boot ??
Click to expand...
Click to collapse
Of course you need a jb compatible hboot the run this kernel.

Working fine on Venom ViperX JB 3.3.2
CID: H3G__001
HBOOT: 1.39

What's battery life using this on Viper like compared to Skydragon?

[Q] WIFI problem !! :( E980 at&t

Facing wifi problem on every custom rom I installed on my LG optimus G pro..
Working perfect on stock based roms.. Anybody know whats the issue ? Using cwm 6..0.4.7 and new phillz touch recovery to install roms but facing same problem.. When phone take first boot after installation the wifi is working but after some hours or next reboot the wifi will no more working.. Found something in build.prop
ro.wifi,channels= "blank"
I put some values of channel in it but it wont work
Plz help me..
Sorry for bad english

zohaibkhan143 said:
Facing wifi problem on every custom rom I installed on my LG optimus G pro..
Working perfect on stock based roms.. Anybody know whats the issue ? Using cwm 6..0.4.7 and new phillz touch recovery to install roms but facing same problem.. When phone take first boot after installation the wifi is working but after some hours or next reboot the wifi will no more working.. Found something in build.prop
ro.wifi,channels= "blank"
I put some values of channel in it but it wont work
Plz help me..
Sorry for bad english
Click to expand...
Click to collapse
It's not unusual for that entry in the build.prop to be blank, and shouldn't cause issues. I think the default there should be '11 11', though having it blank should be fine (pretty certain).
> Working perfect on stock based rom
Which roms are you flashing that are giving you problems? Many of the e980 roms are bugged out in various ways, maybe it's just a quirk of the one(s) you flashed? I had a similar problem recently, wifi just would *not* stay enabled, would not behave. I don't remember which rom it was though; I flash too much.
You've flashed the Kitkat 20g modem, yes? If all else flails, you could always flash back to Kitkat stock and start over, that's guaranteed to tell you whether its a hardware or software problem (if it persists after that: hardward, got to be).

help
culot said:
It's not unusual for that entry in the build.prop to be blank, and shouldn't cause issues. I think the default there should be '11 11', though having it blank should be fine (pretty certain).
> Working perfect on stock based rom
Which roms are you flashing that are giving you problems? Many of the e980 roms are bugged out in various ways, maybe it's just a quirk of the one(s) you flashed? I had a similar problem recently, wifi just would *not* stay enabled, would not behave. I don't remember which rom it was though; I flash too much.
You've flashed the Kitkat 20g modem, yes? If all else flails, you could always flash back to Kitkat stock and start over, that's guaranteed to tell you whether its a hardware or software problem (if it persists after that: hardward, got to be).
Click to expand...
Click to collapse
thanks for reply
I installed cm11 cm12 blisspop v1.0 1.1 .12 1.3 all these roms got same problem that is wifi
I m on JB 4.1.2 stock e98010p a&t
there is no wifi bugs in these custon roms.. only me facing this issue in every custom rom... Can u give me the kitkat firmware link e98020g ? I m gonna flash that rom then I will root my device on KK then I will try to flash custom roms and tell you about results.. thanks
plz provide link..
sorry for bad english

zohaibkhan143 said:
thanks for reply
I installed cm11 cm12 blisspop v1.0 1.1 .12 1.3 all these roms got same problem that is wifi
I m on JB 4.1.2 stock e98010p a&t
there is no wifi bugs in these custon roms.. only me facing this issue in every custom rom... Can u give me the kitkat firmware link e98020g ? I m gonna flash that rom then I will root my device on KK then I will try to flash custom roms and tell you about results.. thanks
plz provide link..
sorry for bad english
Click to expand...
Click to collapse
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).

help
culot said:
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).
Click to expand...
Click to collapse
Ok bro thanks for helping me

zohaibkhan143 said:
Ok bro thanks for helping me
Click to expand...
Click to collapse
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?

culot said:
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).
Click to expand...
Click to collapse
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?

zohaibkhan143 said:
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?
Click to expand...
Click to collapse
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.

culot said:
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.
Click to expand...
Click to collapse
Thanks I will try it soon..!

culot said:
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.
Click to expand...
Click to collapse
Installed sucesfully but one problem in this cwm..external_sd mounting failed cwm ver 6.0.4.4
help plz

zohaibkhan143 said:
Installed sucesfully but one problem in this cwm..external_sd mounting failed cwm ver 6.0.4.4
help plz
Click to expand...
Click to collapse
Oh, no, you misunderstood: you don't use the CWM, you only install it and then quickly install *over* it with one of Freegee's recoveries. Never use the Sphinx CWM, as you'll get errors when you go to flash roms. You only insatll the Sphinx CWM so that Freegee will recognize your device and function, it's only a stepping stone to Freegee, not a recovery you should use on its own.
And, in light of recent developments on the TWRP 2.8 front, I'd say give that a try instead. It mounts your external SD just fine. THe only things I've flashed with it are BlissPop builds and Gapps, but all without an issue yet. Go for the one with the Play theme and enjoy its gorgeous colors.

Thanks buddy.. Freegee recognized my device and installed cwm succesfully
Sent from my LG-E980 using XDA Free mobile app

help
after kitkat update now I m installed those custom roms again but still there is a same wifi problem sick off totally !

[Q] upgradE to newest firmware(4.16.401.10) and still run 4.4.4?

I was hoping to upgrade my firmware(3.32.531.2) to the newest version(4.16.401.10). My baseline nand back up is the original htc tmobile 4.4.4 rom after it was boot loader unlocked, rooted, and s-offed, but nothing else.
If I upgrade to the latest and greatest firmware will that rom still run, or can that only work with android 5.x?
Basically I wanted to upgrade the firmware, make sure that all works, then move to a 5.x rom. I've tested a few 5.x roms and they worked with the older firmware, but I was curious if people knew if it worked the other way?
Thanks!
Device:
Tmo 4.4.4 m8
current firmware 3.32.531.2
Mostly stock - unlocked bootloader, rooted, and s-offed. Still on original htc image

Sartan4455 said:
I was hoping to upgrade my firmware(3.32.531.2) to the newest version(4.16.401.10). My baseline nand back up is the original htc tmobile 4.4.4 rom after it was boot loader unlocked, rooted, and s-offed, but nothing else.
If I upgrade to the latest and greatest firmware will that rom still run, or can that only work with android 5.x?
Basically I wanted to upgrade the firmware, make sure that all works, then move to a 5.x rom. I've tested a few 5.x roms and they worked with the older firmware, but I was curious if people knew if it worked the other way?
Thanks!
Device:
Tmo 4.4.4 m8
current firmware 3.32.531.2
Mostly stock - unlocked bootloader, rooted, and s-offed. Still on original htc image
Click to expand...
Click to collapse
It does work the other way, better than old firmware and new ROM. With old FW and a newer ROM, you will possibly have data connection issues, particularly WiFi.

xunholyx said:
It does work the other way, better than old firmware and new ROM. With old FW and a newer ROM, you will possibly have data connection issues, particularly WiFi.
Click to expand...
Click to collapse
So to be clear: old firmware and new rom works(and I've tried it) but may have issues(I had lte issues but was fine with wifi) but also new firmware old rom shouldn't cause real issues(aka unbootable)? When I was doing this with my old htc sensation sometimes that wasn't the case(but this was back in the good old gingerbread days). New rom(ics) and old firmware was bad news.
If something goes wrong, I want to be able to roll back to my working nand back up of 4.4.4, but if the firmware doesn't allow it, I could have some serious issues.

Sartan4455 said:
So to be clear: old firmware and new rom works(and I've tried it) but may have issues(I had lte issues but was fine with wifi) but also new firmware old rom shouldn't cause real issues(aka unbootable)? When I was doing this with my old htc sensation sometimes that wasn't the case(but this was back in the good old gingerbread days). New rom(ics) and old firmware was bad news.
If something goes wrong, I want to be able to roll back to my working nand back up of 4.4.4, but if the firmware doesn't allow it, I could have some serious issues.
Click to expand...
Click to collapse
Yeah, don't worry. I had 4.16.401.10 on a 4.4.4 ROM for a month or more.

xunholyx said:
Yeah, don't worry. I had 4.16.401.10 on a 4.4.4 ROM for a month or more.
Click to expand...
Click to collapse
Great That's what I wanted to know! I had to wait months to s-off..(sunshine 3.x+) after having free reign with my sensation. I'm just so excited!

Nice to know.
And what about Xposed? If i don't get wrong, it doesn't work on Lollipop because Lollipop is ART-based.
So it should not be any way related to firmware, meaning that I could have the latest firmware (able to support a Lollipop ROM), a Kitkat based ROM AND working Xposed.
Could it be?

xunholyx said:
Yeah, don't worry. I had 4.16.401.10 on a 4.4.4 ROM for a month or more.
Click to expand...
Click to collapse
It worked just fine. Rocking 4.16.401.10 and skydragon 4.2.5 for now! Much thanks!

sbiricuda said:
Nice to know.
And what about Xposed? If i don't get wrong, it doesn't work on Lollipop because Lollipop is ART-based.
So it should not be any way related to firmware, meaning that I could have the latest firmware (able to support a Lollipop ROM), a Kitkat based ROM AND working Xposed.
Could it be?
Click to expand...
Click to collapse
I don't use Xposed, but I believe it will work fine with new firmware as long as you are still on a 4.4.4 base. Xposed modifies /system which is part of the ROM.

Sartan4455 said:
It worked just fine. Rocking 4.16.401.10 and skydragon 4.2.5 for now! Much thanks!
Click to expand...
Click to collapse
How's it going on so far? Still fine?

sbiricuda said:
How's it going on so far? Still fine?
Click to expand...
Click to collapse
Oh yah. Going great. I've settled on LeeDroid as my daily driver, but want a gpe/aosp version that works better in the end. CM12, Blisspop, skydragon(and I've tried others) have all had an issue or two for me that pulled me back to leedroid's. I've not wanted to make the switch to full GPE conversion yet, but maybe one day...

[Solved] I'm ROM-less :(

I accidentally forgot to make a backup before flashing a new ROM and now I'm stuck with no ROM! Please help if you can. Here's my phone's info:
HTC One M9 (Telus Canadian phone) Unlocked with S-ON.
Rooted with SuperSU and TWRP v2.8.7.0.
Currently, I only have access to fastboot and TWRP. I tried flashing Revolution HD and Viper and both of them install just fine, but right after installation, my phone boots to the bootloader and will not boot to the system no mater what I do. I tried going back to full-stock but I think I need S-Off for that which I have no clue how to do with no ROM. Plus fastboot won't even show me what my CID/MID numbers are to download the right stuff for my phone if I wanna go back to stock.
I just need a ROM to work. I don't care which one. What are my options? Is there a way unbrick my phone?
Thanks in advance!

Flash an lollipop ROM and all will be fine, you can't use MM without MM firmware
Powered by SkyDragon ROM

2WildFirE said:
Flash an lollipop ROM and all will be fine, you can't use MM without MM firmware
Powered by SkyDragon ROM
Click to expand...
Click to collapse
Excuse my partial knowledge in this area, but what is MM firmware?

mozer0 said:
Excuse my partial knowledge in this area, but what is MM firmware?
Click to expand...
Click to collapse
Marshmallow Firmware is what you would need to run latest rom. You could pay $25 and use sunshine to make yourself s-off and flash the latest marshmallow Firmware.

BR7fan said:
Marshmallow Firmware is what you would need to run latest rom. You could pay $25 and use sunshine to make yourself s-off and flash the latest marshmallow Firmware.
Click to expand...
Click to collapse
Thanks to you, now I have a ROM
But what's a near-stock Lollipop ROM you'd recommend? Because I just installed Candy5 and Sunshine didn't like it for being too far from stock.

mozer0 said:
Thanks to you, now I have a ROM
But what's a near-stock Lollipop ROM you'd recommend? Because I just installed Candy5 and Sunshine didn't like it for being too far from stock.
Click to expand...
Click to collapse
For the original look you get when you buy it,I'd go with leedroid rom. For AOSP I'd go with slimroms or candy.

FYI, you can install a Marshmallow rom with firmware 2.1x when AOSP only. I tried a Cyanogenmod and was working perfectly with actual nightlies.
But for Sense rom, you will have to install firmware 3.x

Thank you guys for your help! @BR7fan you're a real life saver! Just a quick update:
I managed to get S-Off and now I guess I have to wait until firmware 3.x is released for Canadian phones as I could not get it on the HTC website as of yet. @gortys I ran Cyanogenmod all day today and got annoyed with the WiFi drops. It happens so frequently and as I understand, there's no stable build for the M9 yet. So I'm taking @BR7fan's advice and going with LeeDroid for now. Thanks for pointing out that I can get Marshmallow ROM's with my old firmware.

mozer0 said:
Thank you guys for your help! @BR7fan you're a real life saver! Just a quick update:
I managed to get S-Off and now I guess I have to wait until firmware 3.x is released for Canadian phones as I could not get it on the HTC website as of yet. @gortys I ran Cyanogenmod all day today and got annoyed with the WiFi drops. It happens so frequently and as I understand, there's no stable build for the M9 yet. So I'm taking @BR7fan's advice and going with LeeDroid for now. Thanks for pointing out that I can get Marshmallow ROM's with my old firmware.
Click to expand...
Click to collapse
It's true that wifi isn't as responsive as with a Sense rom. I am actually running Android Revolution HD (Lollipop 5.1) with Elementalx kernel and I'd say that Sense rom are quite always more optimized. Waiting for official OTA to firmware 3.x to flash their marshmallow version of the rom.
Patience for all!!

mozer0 said:
Thanks to you, now I have a ROM
But what's a near-stock Lollipop ROM you'd recommend? Because I just installed Candy5 and Sunshine didn't like it for being too far from stock.
Click to expand...
Click to collapse
Hello, i have the same problem , S-ON twrp 2.8.6.0 rooted, what stock rom do you used in your phone?

samuspr1me said:
Hello, i have the same problem , S-ON twrp 2.8.6.0 rooted, what stock rom do you used in your phone?
Click to expand...
Click to collapse
I used LeeDroid. It's basically stock with a few tweaks.

mozer0 said:
I used LeeDroid. It's basically stock with a few tweaks.
Click to expand...
Click to collapse
Thanks for answer
but my problem is update to 3.35 i cannot find update compatible with cid telus0001, what update do you used?
Thanks in advance.

samuspr1me said:
Thanks for answer
but my problem is update to 3.35 i cannot find update compatible with cid telus0001, what update do you used?
Thanks in advance.
Click to expand...
Click to collapse
Looks like the old Lollipop based LeeDroid has been taken down. I have a backup of it on my phone though. I'm uploading it to Google Drive right now but it's a 2 GB file so it won't be ready till tomorrow. I hope you find something else in the meantime, but if you didn't, check your inbox tomorrow, I'll share the link with you so you can download it.

Thanks, i'll be waiting

samuspr1me said:
Thanks, i'll be waiting
Click to expand...
Click to collapse
Check your inbox

Kernel explain

My question is
Can i install kernel when ive got working phone like right now?? Or i have reflash all thing again?? What woukd happen if i will flash kernel right now ?? And just only kernel. And what adv gives me to install custom kernel pls explain

Hi,
Based on your post, I don't have enough information to say one way or the other. To flash another kernel you need to have an unlocked bootloader and TWRP installed. If you meet both of these conditions, then yes you can install a different kernel regardless of the fact that you aren't installing a ROM and Kernel at the same time. As always, make sure you take back ups before you proceed.
The next step is working out with kernel. You can not install a kernel designed for a stock based ROM on CM13 or vice versus.
Regards,
Ravi

well i mean yes. Ivgot fully unlocked lg g4 h815 and this phone working good but if i will flash that kernel do i need to flash again all things. Or i just simply take a switch to recovery flash only my kernel and the all soft should working ? Do u gotta me ? And ofcourse ive got stock firm from lge and ive got kernel which support my rom

Kernel
Oki ive flash and everything working good xd my question is what gives me to install a new kernel ??;p what advantages?

klisza1993 said:
well i mean yes. Ivgot fully unlocked lg g4 h815 and this phone working good but if i will flash that kernel do i need to flash again all things. Or i just simply take a switch to recovery flash only my kernel and the all soft should working ? Do u gotta me ? And ofcourse ive got stock firm from lge and ive got kernel which support my rom
Click to expand...
Click to collapse
Flashing a kernal is simple. Just head into recovery and flash. You'll keep all your data and everything would look like the same like before.
klisza1993 said:
Oki ive flash and everything working good xd my question is what gives me to install a new kernel ??;p what advantages?
Click to expand...
Click to collapse
Not too sure about the question here.

Kernel
Advantages to instll custom kernel is it worth or not

klisza1993 said:
Advantages to instll custom kernel is it worth or not
Click to expand...
Click to collapse
Read the thread of that kernel and you'll see
Sent from my LG G4