When i wanted to install TWRP via ImageprepGUI I accidentally chose D850 instead of D855 and now my screen won't turn on only the LED is flashing green and blue.
And when i try to go to download mode with a USB cable plugged in my pc sees it as a android ADB fastboot interface
Can anyone please help me?
~Update 1~
I've made some screenshot's with some explanation what is going on when doing some different things
dropbox . com /sh/ umcq797xujznrm5 / AADsyKFvDCXFCxlcrDQ5WLLoa?dl=0
also when going into recovery mode the LED turns red
I hope somebody can save my phone
~update 2~ i managed to mirror the screen on airdroid and the phone is working like normal exept the screen on the phone is not working so it's not bricked but does anyone know how to fix it
bad mainboard - servis
FIXED IT!!!!
~update 3~
IT'S ALIIIIIVE!
I just rebumped the TWRP recovery with ImageprepGUI but this time choosing D850 and now it works! :laugh:
Related
Hello!
I have one LG G3 D815 16GB wich is stuck on fastboot mode, all I can do on it is to enter the Hard Reset menu, but even if I choose Yes from that menu, nothing happens.
When I try to put it in Download Mode it does nothing, but after few moments after the phone is connected to PC on screen appears "[211630] Fastboot mode started".
Can anyone help me? The phone has get bricked from nothing, I didn't do anything to him to get it bricked.
If I try to power it on normally it remains stucked with LG logo on the screen.
Can anybody help me? With a tutorial or something?
Thx!
PS: I didn't installed any custom firmware or something like this on this phone. I attached down there a photo with the screen wich appears after I connect it to PC.
The same problem as me: http://forum.xda-developers.com/lg-g3/help/lg-g3-hard-break-t2977485
No one can help me?
Do you have warranty?
I believe jtag is only option here as you cant enter anywhere.
Happened to me today, this one worked! http://forum.xda-developers.com/showpost.php?p=57655028&postcount=15
Hi guys,
I was running CloudyG3 2.5 on my D855. Today I wanted to go back to stock using LG Flash Tool with D85520h firmware file (lollipop) (in Windows 10). It got stuck at 4%. After waiting for close to an hour, I just unplgged the device. Now when I power it up, I get the secure boot error message and it starts blinking the notification LED (alternating red and blue). Going into download mode also brings up the same blinks, as does attempting to go into recovery mode.
All the threads I have gone to seem to assume that the phone can boot, or enter recovery mode or enter download mode. My phone can do neither.
I desperately need help.
Thanks in advance
ling_c said:
Hi guys,
I was running CloudyG3 2.5 on my D855. Today I wanted to go back to stock using LG Flash Tool with D85520h firmware file (lollipop) (in Windows 10). It got stuck at 4%. After waiting for close to an hour, I just unplgged the device. Now when I power it up, I get the secure boot error message and it starts blinking the notification LED (alternating red and blue). Going into download mode also brings up the same blinks, as does attempting to go into recovery mode.
All the threads I have gone to seem to assume that the phone can boot, or enter recovery mode or enter download mode. My phone can do neither.
I desperately need help.
Thanks in advance
Click to expand...
Click to collapse
you go to this page (http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359)
i also same your problem but i ald fix that.
thurasisyein said:
you go to this page (http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359)
i also same your problem but i ald fix that.
Click to expand...
Click to collapse
Thanks a lot mate. I used the willcracker tool attached in the OP of the thread and it worked like a charm. My phone could go into the Qualcomm HS-USB mode but one of the following factors could have been at play:
1. The BoardDiag tool I was used was fake (as mentioned in the thread you referred me to.
2. The PC I was working on has all ports as USB 3.0 (I'm not sure if that was issue or the fact that I had other devices connected-- just a mouse adaptor, but I could see my phone in Device Manager)
So, I went ahead and changed all of the above: used the newly-found BoardDiag (willcracker), on a another PC with a USB 2.0 port and made sure no other devices were connected.
My phone is now back to life!
So i have a Rogers lg g3 (model d852)
The thing is i interrupted it in the middle of an update which was taking too long (was at 20 pourcent and didnt move)
So now its not working, its at a black screen with a flashing red and blue LED.
I was able to fix it before by entering download mode and reflashing the tot but now its worse than ever, before when i plugged it in to charge it showed the charging screen then blacked out and the LED turned on, now it goes to a backlight screen and then continues to a black screen with the LEDs, also i cant access factory reset or download mode.
However there is something Crazy with this phone when i plug it in on the black screen with the blue and red LED and i press volume up my pc detects it as qualcomm HS-USB qdloer however when i try boardiag 3.99 it says error device was not found in dload trying flash programmer.
So do i have to abandon and buy a new phone or can i do something about it
Any help is apreciated
Eghtesad
SO guys the thing is that i was able to run an sdram test that the phone past (willcrack 2.99) however still no dnload mode nor factory reset
I have a D851. I can't recall exactly what led to this point but I can no longer get my screen to power on. Depending on which mode I try to boot into I get various color LED notifications. I think it happened after a kdz flash of D85110R_00.kdz and then following up by flashing the modfied 30E zip found here on XDA using ArtX TWRP. Then trying to downgrade back to 10C(because I was still having random reboots) but I had to use a different DLL(LGUP8974.dll). Here are the LED colors based on boot mode. Can any one help? I have tried going in to download mode but none of the Utilities seem to recognize the device. What can I do? Anything?
Download Mode - Blue Flashing
Normal Mode - Blue and Red Flashing
Recovery Mode - Blue and Red
Can anyone help?!
Xplorer4x4 said:
Can anyone help?!
Click to expand...
Click to collapse
I can try...
When you plug it into your PC/laptop what does it show up as in the device manager?
*If it says anything like qualcomm9008 or qualcomm9006 then you are hard bricked and will need to do some work to get download mode working again. Guide to unbrick(don't mind the variant - just use yours)... https://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
*If it says anything like lge mobile device or lge android mtp device then you should be ok to do a .tot restore. (Do a tot over kdz - they are the better option.)
But if the buttons do nothing(no lg system recovery menu w/ power/vol button combo & no download mode w/ vol up + usb plug in) it sounds like one or more of your partitions are screwed, so the unbrick option may be your only solution.
Good luck:good:
So when I try to install TWRP (for Lineago OS) I was getting the "fastboot_init" screen and wasn't able to pass it. After some research I found out that my software may be the issue, so to turn the normal state of my phone I flashed this kdz file with LG Flash Tool 2014 in Download Mode.
After that, I booted. I was able to hear the constant starting song with black screen right after I saw the LG logo. After restarting the phone, I'm only able to see charging info and a red light when I plug a usb.
Notes:
- I tried to force restart with Power + Volume Up combination.
- First photo is not mine (shows the same thing)
Problem solved. Try the keyword "soft bricked".
Note that you enter the download mode if you, unplug battery & USB and press Volume Up connect the usb that you attached it to a PC.