Hey friends,
Hi from Istanbul to everyone. I have a rediculus issue with my HTC Desire GSM.
Incall volume is too low. I mean, I'm adjusting to high level and close the settings. Then I'm making a test call. It's again low. Then I'm opening the settings and again seeing that it got low level by itself.
Why it's always getting to low level by itself. I can't hear my calls.
pLS HELP ME
I believe some ROMs (maybe all, not sure) automatically lower the volume of the ringtone when the phone detects that it was moved.
Maybe the accelerometers get triggered to soon on your phone? Try calling your phone, but make sure it's laying still on the table or something...
Grtz
Thank you very much friend... but I am still having this issue
I am having this issue with the custom ROM 'InsertCoin CM7'.
I can barely hear anyone I speak to on the phone and this was not an issue with the stock ROM I had before.
If there was a way to set the in-call volume, that would be incredibly helpful.
Looking to see who else out there is using Groove IP and what settings you have found to work the best. I can't seem to pin down the right combo so I am going to try crowdsourcing.
http://snrblabs.com/snrb/grooveIp.aspx
https://play.google.com/store/apps/details?id=com.gvoip&hl=en
Are you having issues w/ sound distortion over WiFi?
The default settings work fine on most devices, and the changes I've made are minor.
Using version 1.2.21:
-Allow 3G/4G calling
-Accept calls on answer
-turned off DTMF feedback under Audio/Echo settings
-turned on Keep Screen On and Sync Voice under Troubleshooting
What are your Speaker and Mic gain settings? I am only calling over WiFi
Phillip Fry said:
What are your Speaker and Mic gain settings? I am only calling over WiFi
Click to expand...
Click to collapse
Speaker vol: 10
Mic gain (bluetooth as well): 0
Echo Cancellation: On, with Auto Detect
I haven't noticed any issues on my end by tweaking these settings, but can also say things worked fairly well on default.
Phillip Fry said:
What are your Speaker and Mic gain settings? I am only calling over WiFi
Click to expand...
Click to collapse
What kind of issues are you running into? Defaults should be good for the Galaxy Nexus. One thing to watch out for is by default the Galaxy Nexus puts the wifi into a power saving state when the screen turns off. You can change that from the android settings->wifi settings->advanced wifi settings, or enable Keep Screen Alive in GrooVe IP.
I get noticeable lags using Groove IP on my Galaxy Nexus. The extent varies - it's sometimes less than half a second, but often close to two seconds. Happens both incoming and outgoing. I am using the default settings except for the volume. If this matters, the lag is there both on Wi-Fi and 3G.
Phone: Galaxy Nexus (GSM Unlocked)
Carrier: T-Mobile
Region: Seattle
Any advice would be appreciated.
daihard said:
I get noticeable lags using Groove IP on my Galaxy Nexus. The extent varies - it's sometimes less than half a second, but often close to two seconds. Happens both incoming and outgoing. I am using the default settings except for the volume. If this matters, the lag is there both on Wi-Fi and 3G.
Phone: Galaxy Nexus (GSM Unlocked)
Carrier: T-Mobile
Region: Seattle
Any advice would be appreciated.
Click to expand...
Click to collapse
Few things can cause lag. First would be latency on the data connection. Apps running on the device that use cpu or data...or battery manager or task killer apps could also cause problems with calls. We are also working on a new update that should improve the in-app delay for audio. On our Galaxy Nexus it seems to work pretty good so far. I think we'll have a beta for it ready sometime this weekend. We'll likely be posting it on our facebook page when it's ready. Oh, something on the device going into a power saving state would also cause delay. Keep Screen Alive can help with that.
snrb Labs said:
Few things can cause lag. First would be latency on the data connection. Apps running on the device that use cpu or data...or battery manager or task killer apps could also cause problems with calls. We are also working on a new update that should improve the in-app delay for audio. On our Galaxy Nexus it seems to work pretty good so far. I think we'll have a beta for it ready sometime this weekend. We'll likely be posting it on our facebook page when it's ready. Oh, something on the device going into a power saving state would also cause delay. Keep Screen Alive can help with that.
Click to expand...
Click to collapse
Thanks for the update! I will await the new beta version. I'll keep an eye out on your FB page.
Besides the Keep Screen Alive option, are there other options that may help reduce the lag? I see things like Synchronize Voice and Mic Buffer. For instance, will it reduce delay if I change the Mic Buffer size from medium (default) to small?
Thanks again!
daihard said:
Thanks for the update! I will await the new beta version. I'll keep an eye out on your FB page.
Besides the Keep Screen Alive option, are there other options that may help reduce the lag? I see things like Synchronize Voice and Mic Buffer. For instance, will it reduce delay if I change the Mic Buffer size from medium (default) to small?
Thanks again!
Click to expand...
Click to collapse
Synchronize Voice can help, I don't really use it on the Nexus. Changing the mic buffer to small should also help, that's one of the things we're changing. Small seems still too large. So we're going to be adjusting small to be smaller and make it the default.
snrb Labs said:
Synchronize Voice can help, I don't really use it on the Nexus. Changing the mic buffer to small should also help, that's one of the things we're changing. Small seems still too large. So we're going to be adjusting small to be smaller and make it the default.
Click to expand...
Click to collapse
Thanks! I will make adjustments to those settings to see how it goes.
I wonder if there is plan to support more than one google voice login in Grooveip soon? Something that we can switch from one to another quickly?
testrider said:
I wonder if there is plan to support more than one google voice login in Grooveip soon? Something that we can switch from one to another quickly?
Click to expand...
Click to collapse
Might not be soon but it is something we're working on. Right now you can switch users pretty quickly by going into the menu and pressing change user. But that's not the same as supporting multiple accounts. Battery life is also an issue with multiple sign ins, still working on it.
Hey is this beta or new version addressing the latency available yet? I have an Epic Touch 4G & have tried everything (spoken to support repeatedly over email - thanks!) & still get 1-2 second delay. Difficult to have a normal conversation as we keep cutting each other off as we think we're done speaking.
snrb Labs said:
Might not be soon but it is something we're working on. Right now you can switch users pretty quickly by going into the menu and pressing change user. But that's not the same as supporting multiple accounts. Battery life is also an issue with multiple sign ins, still working on it.
Click to expand...
Click to collapse
elcidroyale said:
Hey is this beta or new version addressing the latency available yet? I have an Epic Touch 4G & have tried everything (spoken to support repeatedly over email - thanks!) & still get 1-2 second delay. Difficult to have a normal conversation as we keep cutting each other off as we think we're done speaking.
Click to expand...
Click to collapse
The latest version on the market has all our improvements for latency. There will still be latency from your network or from the device. Stopping apps running in the background can improve the device latency.
Well I downloaded that version and most of that lag seems to be gone. Yippee!
elcidroyale said:
Well I downloaded that version and most of that lag seems to be gone. Yippee!
Click to expand...
Click to collapse
Glad that improved things. Thanks for the update.
I just purchased this after months of debate. Are there any settings to reduce the static on the other caller's end? I did some test calls with a friend's phone, except I was holding both devices in each hand. It doesn't matter who initiates the call, but they'll hear a static noise that doesn't happen if the call is made via mobile network. Could very well be Google Voice itself because people have mentioned it to me before before I purchased Groove IP, but I just want to be sure.
Also, sending and receiving bluetooth calls do work through my car stereo. But if I'm receiving a call, something is missing to tell the radio to pause/mute the music and start the ringer. The phone itself still rings and vibrates, but it's easy to miss a call if the music is loud enough. Is there an additional setting I'm missing? The function works properly if I'm using the regular phone app.
binglejellsx2 said:
I just purchased this after months of debate. Are there any settings to reduce the static on the other caller's end? I did some test calls with a friend's phone, except I was holding both devices in each hand. It doesn't matter who initiates the call, but they'll hear a static noise that doesn't happen if the call is made via mobile network. Could very well be Google Voice itself because people have mentioned it to me before before I purchased Groove IP, but I just want to be sure.
Also, sending and receiving bluetooth calls do work through my car stereo. But if I'm receiving a call, something is missing to tell the radio to pause/mute the music and start the ringer. The phone itself still rings and vibrates, but it's easy to miss a call if the music is loud enough. Is there an additional setting I'm missing? The function works properly if I'm using the regular phone app.
Click to expand...
Click to collapse
The static could be because both phones were in close proximity to each other. Have you tried it with normal calls?
For incoming calls were you using the native music app or another app like pandora? We broadcast that a call is being made or received, the native music app should detect that, but an app like pandora may not since the app isn't the same as the native phone system.
snrb Labs said:
The static could be because both phones were in close proximity to each other. Have you tried it with normal calls?
For incoming calls were you using the native music app or another app like pandora? We broadcast that a call is being made or received, the native music app should detect that, but an app like pandora may not since the app isn't the same as the native phone system.
Click to expand...
Click to collapse
You mean to a landline? I haven't. I did try with another person a few hundred feet away with the same results. I also talked to someone else for a few seconds, but the only thing they asked was if I was whispering. After I had posted on here, I changed my settings to the ones recommended from the "other" forum: http://rootzwiki.com/topic/32464-voip-apps/page__st__10#entry902020. My voice was probably just low due to the low mic gain setting, but I'll leave things the way they are until I get more comments from people's calls.
As for the bluetooth issue, I'm not using my phone to play music. The music is through the radio, which utilizes bluetooth to make phone calls. Normal operation of incoming calls cuts the audio and rings through the car speakers until I pick up. With Groove IP calls enabled, only the phone is ringing and the music/car audio is still playing (which is usually louder than the phone's ringer). Hope that clears things up a little.
Happy Holidays!
I have set Call Connect Vibration on, however, when the call is connected, the vibration is weak, sometimes unnoticable. Is there any solution/Xposed that helps increase intensity of Vibration?
Thanks
I'm on H818p and tried Android Vibration xposed module but didn't help!
I feel you my friend. Unfortunately I'm also suffering on G4's weak vibration. :'(
Sometimes it feels like it didn't vibrate at all! What's the point LG?
Nexus 5X, Stock 8.1.0 with security patch level 5 April 2018.
If I make or receive a call, the other party cannot hear me, my voice is severely muted and garbled. I've tested this by leaving messages on my home phone and all suffer from exactly this.
Now the microphone itself seems to be fine - WhatsApp voice messages are perfectly clear, I installed a voice recorder app to check and the recordings are good. Google voice searches also work fine.
I've done a factory reset. I've uninstalled updates to the Google Phone app. I've swapped SIMs. I've tried alternative dialers. I've turned on/off 2G /3G /4G. But my voice calls are always rubbish.
Anyone have any ideas as to what might be going on or suggestions as to what else to try?
Thanks!
Hi
I'm just visiting here with the same problem. I've been getting complaints about call quality from my end for a little while and it's driving me mad trying to be heard, often it starts off okay, then degrades rapidly after a few minutes, other times its from the start of the call. I've done the same as you, the mic tests fine in other apps, and sometimes it works okay. I did a complete factory reset which did seem to improve things but the problems returned, and no, I hadn't added any apps in between it working and going back to being terrible.
I've also tested calling my home answer phone and leaving a message to see what people are complaining about, and it is just constant drop outs. This happens over Wi-Fi calling, and over the network (EE network/UK), so it's not a reception problem. I've also used a plug in headphones with microphone and it's the same problem.
I really didn't want to buy another device at this time, but to me it's looking like a hardware problem.
Regards
Phil
same problem
same problem bro . noise canceling problems ??
Hi
nadun92 said:
same problem bro . noise canceling problems ??
Click to expand...
Click to collapse
Before I did the factory reset I had tried turning off noise reduction in the build.prop as recommended to try but it made no difference.
It sounds to listen too as though it's a faulty connection, and I'm thinking now this might be related to the reboot loops caused by connection problems, and this has the same cause, broken connections on the main chip. It's odd the sound is okay when recording sound or video, however that might simply be because the sound is being routed and processed elsewhere, and it's only when it's compressed for a call and routed via the Qualcomm modem that it's affected by a faulty connection. This would explain why sometimes for me it is okay, or starts of on a call okay then as the phone warms up the connection starts breaking.
Regards
Phil
Hi
I've now upgraded to a Pixel XL 2 as I needed to be able to be heard on calls and the 5X was out of warranty and LG didn't want to know. I really didn't want to upgrade quite so soon. The XL with the same SIM card on the same mobile network is all good and everyone can hear me, plus I have the benefit of VoLTE.
I believe the microphone problem is hardware related, most likely the same cause as the boot loop issues where the CPU or board has some broken solder connections. It sounds like a broken connection, and explains why it has progressively become worse. It's a pain as usually when I upgrade my phone gets handed over to another family member, but I can't do that with the broken 5X.
Regards
Phil