Hi !
I've found a way to downgrade 4.4 to 4.3 with odin!
All you need to do is go to sammobile and download the latest avaliable 4.3 firmware
(I've downloaded a Chinese sw , because it was dated 20/05/2015 and it was 4.3)
After you download it , extract the Zip , put your phone in download mode
And simply flash with odin .
It worked for me !
If you have questions don't be afraid to ask
Knox? 0x0 or increase 0x1
This downgrade work?
Miky500 said:
Knox? 0x0 or increase 0x1
This downgrade work?
Click to expand...
Click to collapse
KnoX is 0x0
are you rooted before?
I had no chance to try 4.3.My N3N come with 4.4 since day 1.
how's the battery life? better or wors than 4.4?
Battery is better from 4.4 .
I wasnt rooted !
Faster and easier than 4.3
Related
Hi I am from Portugal and this is my first post.
I upgraded my mini s4 for 4.4.2 but the battery life is bad, so I wanted to get back to stock 4.2.2. is it possible to downgrade?
Already tried the downgrade I download the 4.2.2 TCL SamMobile put the phone in odin mode and it appears the error and then the mobile phone to say to connect to kies to repair software. so flashing a new recovery and back to normal but with the same 4.4
sorry for my english.:crying:
rmiguel320 said:
Hi I am from Portugal and this is my first post.
I upgraded my mini s4 for 4.4.2 but the battery life is bad, so I wanted to get back to stock 4.2.2. is it possible to downgrade?
Already tried the downgrade I download the 4.2.2 TCL SamMobile put the phone in odin mode and it appears the error and then the mobile phone to say to connect to kies to repair software. so flashing a new recovery and back to normal but with the same 4.4
sorry for my english.:crying:
Click to expand...
Click to collapse
I think it is not possible to downgrade, because of the Knox bootloader, but wait for an expert answer.
Não sou expert na matéria!
rmiguel320 said:
Hi I am from Portugal and this is my first post.
I upgraded my mini s4 for 4.4.2 but the battery life is bad, so I wanted to get back to stock 4.2.2. is it possible to downgrade?
Already tried the downgrade I download the 4.2.2 TCL SamMobile put the phone in odin mode and it appears the error and then the mobile phone to say to connect to kies to repair software. so flashing a new recovery and back to normal but with the same 4.4
sorry for my english.:crying:
Click to expand...
Click to collapse
Ask Him
catelusii said:
Bad experience with KK 4.4.2 brasil
First, wi-fi not working. after 3 fw reinstall with odin and routed, everythink ok, but, I see battery dropping like crazy.
I decide to downgrade from TWRP ... I install 4.2.2 ML1 by Ladyslav.... all thinks OK, but the modem not changed... modem from KK.
I try to reinstall ML1 Modem with odin, and I loose my IMEI/modem not found ( and kernel error or locked ... not shure )
got to service and now it is ok with KK .... battery drop like crazzy ( I`m afraid to downgrade again
Click to expand...
Click to collapse
Hey...I downgraded from germany KK NE6 to Brazil UBUBNE2. I think brazil UBUBNE2 has knox 2.0. I need an expert to confirm this, if you have a look at download mode on any kk firmware you will find this on the second last line :: BOOTLOADER RP SWREV : 2
That is the same revision of knox bl on ububne2 brazil JB firmware. I downgraded from GER NE6 to BRAZIL UBUBNE2 and I confirm this works.
GOOD LUCK.
IMPORTANT :: I need experts and senior users to please have a look at what I mentioned above. Thanks.
sasank360 said:
Hey...I downgraded from germany KK NE6 to Brazil UBUBNE2. I think brazil UBUBNE2 has knox 2.0. I need an expert to confirm this, if you have a look at download mode on any kk firmware you will find this on the second last line :: BOOTLOADER RP SWREV : 2
That is the same revision of knox bl on ububne2 brazil JB firmware. I downgraded from GER NE6 to BRAZIL UBUBNE2 and I confirm this works.
GOOD LUCK.
IMPORTANT :: I need experts and senior users to please have a look at what I mentioned above. Thanks.
Click to expand...
Click to collapse
Hi why you downgrade from NE6 to UBUBNE2 ? Battery ?
I guess that I9195XXUCNE6 will take only 24hours of battery life anf about Max 3:30 hours on display time.
Any tests ?
@heget
back then when i flashed kk firmwares the modem did not upgrade...it remained on ububne2. as a result of this i faced hell of a lot issues....i thought it was something wrong with the rom...later i realised the modem was at fault..then flashed it and it worked...right now i am on xxucnf7 deodexed stock kitkat...its superb..very good battery life..check out the "post battery results" thread in general section..u will find my report there..
here it is
forum.xda-developers.com/showpost.php?p=54454891&postcount=40
YES 100% working ............i installed Brazilian firmware on my galaxy s4 mini my all issue + battery drain issue resolved try......everyone should try which have these type issues with this KITKAT is completely useless .....BEst of luck to all
http://www.sammobile.com/firmwares/download/30561/I9195UBUBNE2_I9195ZTOBNE2_ZTO/
Hello to all the community, I have a question, I need to know if it is possible to downgrade from a room with Android 4.4.4 to 4.4.2 or 4.3 with .. Basically I installed the next room:
http://forum.xda-developers.com/showthread.php?t=2541860
The rom works perfectly, but I wonder if it is possible to downgrade?
Sorry for my English ..
A rooted version of the 4.4.2 or 4.3 rom can be used to downgrade. ..if using a touchwiz based build. ..but the bootloader cannot be downgraded if you flashed or updated to official 4.3 or 4.4.
Knox flag will be tripped and any warranty will be voided. ..g
You can Root your E700H (Lollipop 5.1.1) Version easily using CF Autoroot, Link for the thread:
http://forum.xda-developers.com/showthread.php?t=1980683
Don't Try it on Lollipop version other than E700H Model or you may brick your device. For the list of supported devices/Download look here:
https://autoroot.chainfire.eu/
CF Auto Root for SM-E700H 5.1.1
Not working properly because
It said "set warranty bit karnel"
In every restart
You're in India and installed 12/28/15 Update? (290mb)
No actually, I downloaded from Samfirmware.com
Latest update of SM-E700H,
E700HXXU1BOL1_E700HODD1BOL1
and Fresh Flashed using Odin 3.10.7
Ask it in the Central thread, link in main post
OK but you checked it or not?
anyone checked it?
In your same device worked it or not?
Succesfully Tested On Glaxy E700H Running Lollipop
It Requires E700HXXU1BOL1-20151222100159 Firmware
See My Video On Confirming this Official Root On Galaxy E7 youtube.com/watch?v=g87hwrithNQ
Just Copy paste the Link plz subscribe
ThankYou!:good:
I am not telling you it not rooted
Device gone rooted but when just
Device reboot it shows "set warranty bit karnel"
With yellow colour font top left corner of
Screen at every booting time
But same not show in android 4.4.4
h
thanks for this tread my e700h was succesfully rooted. hope there will be custom rom
Need Help
phonglhie said:
thanks for this tread my e700h was succesfully rooted. hope there will be custom rom
Click to expand...
Click to collapse
Do You have the latest firmware the BOL1
I need To flash it via odin.. Plz Upload it to google drive and Msg me the Link (PS: you download the Region as INS/INDIA)
No No I have official B0L1 which you told
and Samfirmware.com provide us at top
My knox have 0x1 (4) position
after that I have same problem again
anybody know how to reset knox flash counter
0x1 (4) to 0x0
Samsung Galaxy E7 SM-E700H
update
can i installed sam firmware directly on my rooted e7 via odin..i am on kitkat
pkdubai20 said:
anybody know how to reset knox flash counter
0x1 (4) to 0x0
Samsung Galaxy E7 SM-E700H
Click to expand...
Click to collapse
thats impossible
If I will make root on my s5 mini and then I will sell it but efoare I will flash back a stoch formware (so taking away the root) do u know if the upgrade will be ok 100% or will see that the knox is not more 0x0 and will not upgrade exaple : from kitkat to lollipop and so on?
Thank'
s
Helen
Hi @ all,
I need a little help to upgrade my SM-T805 from 4.4.2 to 6.0.1 (T805XXU1CPH5).
I had rooted my SM-T805 in the past with this [GUIDE] How to root without tripping knox - Kitkat and Lollipop, Locked bootloader
Now my question is - It is possible to upgrade to 6.0.1 with keeping root an knox at 0x0?
And when it is possible i need some hints.
My first idea was to download the firmware and flash it with Flashfire but I do not know if this is the right way and whether there are certain things to consider.
Thanks in advance
Cookie
P.S.: Sry 4 my bad english, I'm a german guy
I think you cannot. since mm need new bootloader. and kingroot no longer working.