Hello,
I have a N910V, works great but have of course verizon Rom ( Stock ). Currently use it on cricket, which is AT&T. Is there any way to install the AT&T rom or something to get rid of all verizon's crap, and so it will function properly?
Thanks !
currently running verizon ( ota ) 5.0.1 lollipop. want to make it run AT&T.
BIggest problem is that all incoming calls put a ( + ) sign before any numbers and its really annoying ... Tried Prefixer from the app store, but it doesnt remove it properly. .... any ideas ?
I would use titanium backup and freeze the verizon apps or any apps u don't want. You can do a search on which apps are safe to delete or freeze.
Related
I hope this is the correct section for this question. I rooted my s3 installed a custom rom. more than once! switched recovery a few times. basically played with my phone. Well now i need the stock att rom. I have the stock recovery. Yes i did search for Stock recovery but there are no ATT apps with them? Im on ST right now and have a guy who wants it for his att account. but wants all the apps?? odd yeah. So where d i get the stock att apps that came with the phone originally?
mcspaulding said:
I hope this is the correct section for this question. I rooted my s3 installed a custom rom. more than once! switched recovery a few times. basically played with my phone. Well now i need the stock att rom. I have the stock recovery. Yes i did search for Stock recovery but there are no ATT apps with them? Im on ST right now and have a guy who wants it for his att account. but wants all the apps?? odd yeah. So where d i get the stock att apps that came with the phone originally?
Click to expand...
Click to collapse
Welcome to the forum! Would you recall what Android version you were on prior to flashing the custom ROM? Ideally you would want to return to the same version in order not to risk a brick. You can also check your phone settings and see what the firmware parameters are. If your baseband says UCUEMJB, then you would have to go to 4.3 but if it's UCDLK3, then you could go to 4.1.1 or 4.3. Flashing a complete stock image should install the basic AT&T apps and settings. Anything else, you can add from the Play Store
The strangest thing happened to my G3. I had it rooted and since i was having a few problems with bloatware from my carrier MEO from Portugal) i decided to install the stock version to see if i could get rid of it. Installed .kdz file for V10a-EUR-XX and did a factor reset.
After that i still have all the bloatware of my carrier but lost root and all the Quick apps from LG (Quick Note, Q remote, and probably a few more and cant remember the name). Now getting it rooted again is easy, but where can i find those apps again since they aren't on Play Store?
Can someone help me out?
Click to expand...
Click to collapse
Solution i found was to install a new firmware, installed the V10g and the apps where back and the bloatware was gone.
Hello people finally got back to HTC , long wait from HTC ONE MAX to the M9, so I'm running on cricket- data throttle sucks . But only issue I'm having so far is no VVM , running current OS 6.0 att ruu. Stock no root no soff. Yet... stock art vvm not working , Dow loaded cricket Vvm , still not working , it's trying to sync , text comes comes back as status but fails to provision need some help guys thanks
Cricket vvm does not work with stock roms sadly, att vvm is tightly coupled into the rom and it breaks alot if you remove it. Your only option for vvm is a 3rd party rom without the att crap that you have.
How about getting att vvm working with cricket , or native 6.0 marshmallow vvm
Cricket says it's not going to work since not cricket phone
Thinking of going to go phone
Problem solved after root and Rom flash , man things sure did change from M7- M9. Bootloader is different, then I ran in to the no Sim firmware issue, flashlling the firm ware took a few hours to figure out, then after thinking everything was good to go , get in the road figure let me try the 10 port, twrp is gone
Okay, so long story short, I have a SM-G928A I brought over from ATT to Tmobile. Before, I was running the 6.0 ATT Rom, and WIFI Calling would not enable, although I BELIEVE it was working. (I could see the symbol in the call status screen when I made a call.) You also need Wifi calling to use advanced messaging features. Yesterday I flashed the newest 7.0 ATT Rom to the phone, everything works fine, however Wifi calling still can't be enabled.
I read a couple places that even if I put the TMobile ROM on it, WIFI Calling still won't work. I need some advice. I really want this to work, however the phone is working fine besides that.
Right now I am on G928AUCU4EQC6.
I also read something about flashing a PIT file with the TMOBILE rom, but it was not clear at all, very confusing. I need some advice on what to do next.
Forgot also want to remain on Nougat.
How did you manage to flash ATT rom on it? i've been trying and keep getting "Secure check fail pit" Im on tmobile rom with Nougat 7.0
braddman said:
Okay, so long story short, I have a SM-G928A I brought over from ATT to Tmobile. Before, I was running the 6.0 ATT Rom, and WIFI Calling would not enable, although I BELIEVE it was working. (I could see the symbol in the call status screen when I made a call.) You also need Wifi calling to use advanced messaging features. Yesterday I flashed the newest 7.0 ATT Rom to the phone, everything works fine, however Wifi calling still can't be enabled.
I read a couple places that even if I put the TMobile ROM on it, WIFI Calling still won't work. I need some advice. I really want this to work, however the phone is working fine besides that.
Right now I am on G928AUCU4EQC6.
I also read something about flashing a PIT file with the TMOBILE rom, but it was not clear at all, very confusing. I need some advice on what to do next.
Click to expand...
Click to collapse
So, how was the flashing process because people told me that flashing the s6 series was not a good idea since it was not universal like the s7 series. Also, did volte work because that's what I mainly need to enable on my s6 edge which I'm taking from atnt to tmobile
I just bought the Moto Z2 Force today (ATT version yuck). Basically I need to be able to restore data from google's automatic backup since I have apps and data there that cannot be reproduced (my launcher was discontinued etc). Since the ATT version cannot upgrade past android 7.1.1 it cannot restore from my old phone which was at a newer version of android.
Is there a way to kill two birds with one stone here? I don't want ATT on my phone but my main priority is to restore from google backup. What ROMs allow google restore? Is there a stock unlocked (not carrier version) of android for the Z2 Force that I can flash? This would be optimal for me since I like the android experience.
Would Lineage or Resurrections Remix work? (I have never used those so Idk how close to android they are. As long as I can backup I'd be happy to try).
Any help is appreciated, thank you!
further questions...
I see this post:
https://forum.xda-developers.com/z2-force/development/att-ocxs27-1094717-xml-zip-grabbed-t3905967
which sounds like it forces an update on the att phone. If I follow these steps I'll be able to at least restore from my old phone? But then is there a way to unlock / remove att bloatware after that?
EDIT: update. I'm using the LMSA to flash a newer version as found in this thread:
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
hopefully this will let me restore. But I still need to unlock the phone and remove bloatware.