Develop Bugs

[Q] After Update Recovery Mode NO COMMAND

I've updated my phone from 4.1.2 into 4.2.2 via OTA and successful. The problem is after updated the phone is very slow and I'd like to reset. I try to press Volume Up + Home + Power but I can't enter recovery mode menu instead NO COMMAND picture.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Help me please.

alid_abdul said:
I've updated my phone from 4.2.1 into 4.2.2 via OTA and successful. The problem is after updated the phone is very slow and I'd like to reset. I try to press Volume Up + Home + Power but I can't enter recovery mode menu instead NO COMMAND picture.
Help me please.
Click to expand...
Click to collapse
The No command is generated when you don't flash Fix-Recovery.zip after you flash your first custom recovery over samsung's
Take the recovery .tar file from here according to firmware (4.1.2 or 4.2.2) : http://forum.xda-developers.com/showthread.php?t=2315529
Follow the steps in this post : http://forum.xda-developers.com/showpost.php?p=46395577&postcount=19

alid_abdul said:
I've updated my phone from 4.2.1 into 4.2.2 via OTA and successful. The problem is after updated the phone is very slow and I'd like to reset. I try to press Volume Up + Home + Power but I can't enter recovery mode menu instead NO COMMAND picture.
Help me please.
Click to expand...
Click to collapse
Flash CWM and then reboot recovery by pull out battery-insert it-volume up+home+power
NOTE: it will disable ota update and replace your recovery. If you want to enable Ota update, use Wanam Xposed
Sent from my GT-I9082 using Tapatalk

iceyhotguy said:
The No command is generated when you don't flash Fix-Recovery.zip after you flash your first custom recovery over samsung's
Take the recovery .tar file from here according to firmware (4.1.2 or 4.2.2) : http://forum.xda-developers.com/showthread.php?t=2315529
Follow the steps in this post : http://forum.xda-developers.com/showpost.php?p=46395577&postcount=19
Click to expand...
Click to collapse
black87 said:
Flash CWM and then reboot recovery by pull out battery-insert it-volume up+home+power
NOTE: it will disable ota update and replace your recovery. If you want to enable Ota update, use Wanam Xposed
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
Actually my phone still using stock ROM, haven't flashing using other ROM so far

alid_abdul said:
Actually my phone still using stock ROM, haven't flashing using other ROM so far
Click to expand...
Click to collapse
If there 4.2.1 for grand duos (just kidding)
Sent from my GT-I9082 using Tapatalk

black87 said:
If there 4.2.1 for grand duos (just kidding)
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
Oooppss sorry misstype -____-
4.1.2 not 4.2.1 hehehe

alid_abdul said:
Actually my phone still using stock ROM, haven't flashing using other ROM so far
Click to expand...
Click to collapse
If you mean is revert from 4.2->4.1, you need to download from sammobile.com . and flash it with ODIN, make sure the country code is correct.
Be careful when flashing with Odin, its more safe if you flashing on your laptop, because the phone will HARDBRICKED if your usb accidentialy removed or electricity unstable.
If phone goes bootloop, wipe data and cache
Sent from my GT-I9082 using Tapatalk

alid_abdul said:
Actually my phone still using stock ROM, haven't flashing using other ROM so far
Click to expand...
Click to collapse
Doesn't matter if you are on stock or custom ROM, if you want your phone rooted, the process of installing CWM is the same as I mentioned above.

Thanks all,
It solved with weird way, press the vol up+home+power and appear no command, and I just wait around 7-10 minutes then recovery menu appear. Weird -__-

no command nt even rooted
iceyhotguy said:
The No command is generated when you don't flash Fix-Recovery.zip after you flash your first custom recovery over samsung's
Take the recovery .tar file from here according to firmware (4.1.2 or 4.2.2) : http://forum.xda-developers.com/showthread.php?t=2315529
Follow the steps in this post : http://forum.xda-developers.com/showpost.php?p=46395577&postcount=19
Click to expand...
Click to collapse
hello sir,
i tried to root my phone by the method given by explore gadgets to root 4.4.2 running note 2...can't post the link being a new member..
after i flashed twrp recovery using odin...to flash super user file i opened recovery mode..since then it's showing no command error...couldn't even flash the su file...nd i chked the emulator...it is showing the phone is not rooted.
plz tell me what happened and kindly resolve the issue too..thank you.

mansi0312 said:
hello sir,
i tried to root my phone by the method given by explore gadgets to root 4.4.2 running note 2...can't post the link being a new member..
after i flashed twrp recovery using odin...to flash super user file i opened recovery mode..since then it's showing no command error...couldn't even flash the su file...nd i chked the emulator...it is showing the phone is not rooted.
plz tell me what happened and kindly resolve the issue too..thank you.
Click to expand...
Click to collapse
I do not have a note 2 so I can't simply solve it for you.
You should head over to note 2 section of XDA and use the threads dedicated to showing how to root and troubleshooting problems.
Try this: http://forum.xda-developers.com/showthread.php?t=2730764
Good luck sir.

Helo sir my phone model Samsung galaxy grand neo in recovary mode says no command error and my recovery not working....help me to fix this problem and solved out.......mail my Gmail I'd. [email protected]
..
I wait your mail with your ans

[HOW TO][GUIDE] Flashing 4.3 Roms

This Thread is a W.i.p...
Please PM me for any changes that needs to be made here. Or anything you can think of or any info that needs to be added ...
This tutorial for only those user, who recently updated their device with the Android 4.3 Jelly Bean I317UCUBMK6 firmware. Cf-Auto-root is one of the easiest and fastest way to root Samsung devices, it does nothing but install and enable SuperSU on your system, so apps can gain root access. Rooting has lots of benefits, after rooting your device you can install lots free rooted app on your device, install Custom ROMS etc.
---WARNING!!!!---
Your warranty is void if you follow the given instructions in this guide!!!!!
SOME SMALL REQUIREMENTS REQUIRED!!!!
Please Read about what your doing to your device if your new at this!!!!!
Make sure you understand how Android works.
Knowledge of basic flashing rules is something good to know!!
Using Custom Rom's, Recoveries, Odin, Etc..
Reading/Searching is your friend when doing anything to your device...
Before following the below Mention guide, It’s always recommended to follow the requirements to stay safe.
Click to expand...
Click to collapse
1. BACKUP YOUR ANDROID DATA
Make a Full Backup of your Android Apps, SMS, Contacts, Call Logs, Bookmarks. This one is one of the most important step that you have to follow, as we don’t want anyone losing their personal data or apps. For help on Backup and Restore check out the below mention guides.
[Guide] Backing up your data basics. Go >>[HERE]<<
Titanium Backup
Titanium Backup is the most powerful backup tool on Android, and then some.
Rom Toolbox
ROM Toolbox is THE MUST HAVE APP for every root user. Get ROM Toolbox Pro to unlock all the features!
2. INSTALL GALAXY NOTE 2 DRIVERS
You need these drivers to connect your device with the computer to follow this guide. Without these USB drivers you can’t connect your device to the PC, first download and install these drivers on your system.
[DOWNLOAD ANDROID USB DRIVERS]
3. ENABLE USB DEBUGGING MODE
Now you need to enable USB debugging mode. Without enabling USB debugging mode on your device you can’t start the root, Custom ROM or Unlock process.
HOW TO ENABLE USB DEBUGGING MODE ON ANDROID DEVICES
Enable-USB-Debugging
Go to setting, General tab, Developers Options.
(If no developers options visible. Then go to About Device, then scroll down to Build number and click it 7-times to have the developer options come up)
4. CHARGE YOU ANDROID
If your device switched off during this process, it could damage or brick the device. Make sure that your Android battery is full charge or near about 50-70% battery level.
How To Update Galaxy i317 via Kies
Make sure you have stable internet connection on your computer.
Now download and install>>[Samsung Kies]<<on your computer.
Turn on your device (if it off) and then connect it to computer with USB cable.
Run Samsung Kies and wait for it to detect your device.
You should see a New Firmware Upgrade is available at Samsung Kies home screen.
Press the Firmware Upgrade button to proceed.
Follow on screen instruction and soon you will see your device running upgrade and reboot automatically. Once done, you can disconnect your device from computer.
Again! If you see “This is the latest firmware” in Samsung Kies, then your device yet to receive the latest update on Kies. Its good time to go for manual update instruction that located below.
Part:1
ROOT GALAXY NOTE 2 AT&T SGH-I317 RUNNING ON ANDROID 4.3
Step 1. Download the Cf-Auto-Root Package for Galaxy Note 2 >>[HERE]<< and extract the folder on your desktop and you will get the CF-Auto-Root-t0lteatt-t0lteatt-samsungsghi317.tar.md5 file.
Step 2. Download the ODIN flash tool >>[HERE]<< and extract the folder on your desktop. You need this tool to flash the root package on your device.
Step 3. Now turn off you device and wait for few seconds. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 4. Now your Note is in download mode, Connect your device to the PC with USB cable.
Step 5. Launch Odin on the computer and the ID: COM box of your ODIN Screen will turn to light blue with the COM port number. This means your device is connected successfully with the app.
Step 6. In Odin, click the PDA button and select the CF-Auto-Root-t0lteatt-t0lteatt-samsungsghi317.tar.md5 file (Same File that you extracted on your desktop on Step 1)
ODIN Screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Next, ensure that the check boxes “Auto Reboot”, “F. Reset Time” and “PDA” are the only check boxes checked and the rest are not. And Make sure re-partition is NOT ticked on the ODIN application
Step 7. Click start and wait for some time to run the root process.
Once the process is finished on your device you will see the a PASS message with green background on the ODIN application
Now you can disconnect your device from the computer and your device is rooted now....
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Part:2
Now for flashing a New Custom Rom Steps
If you have done the above^^^^^^^ steps and you've successfully Rooted . Then proceed to Step 1
1. First make sure you have a custom [>>[Recovery]<<] installed.
You can find the Recovery files here:
http://techerrata.com/file/twrp2/t0lteatt/openrecovery-twrp-2.6.3.1-t0lteatt.img.tar Flash this via Odin
http://techerrata.com/file/twrp2/t0lteatt/openrecovery-twrp-2.6.3.1-t0lteatt.zip
2. Then choose your Rom of choice to install.
For those looking for stock 4.3 pre-rooted firmware go>>[HERE]<< Thanks to Zen Arcade
For All Custom Roms look >>[HERE]<< and also >>[HERE]<< for the Original Development Section.
3. After choosing your Rom. You can reboot into recovery now.
Recovery Instructions Below
a. Wipe your system= Factory Data Reset
b. (Goto Advance) Wipe your cache/dalvik, Data, System, Internal 3x
c. Wipe Internal storage for a clean install. [BACK UP your stuff you want before wiping Internal!!!!!]
d. Locate Rom file on your ext SD card, flash Rom, let it finish. Should be about 5 minutes or less.
After you reboot let the Rom settle for about 5-10 minutes minimum. Before setting up your device.[Google Account]
Fix Boot Loop Issue On i317.
If your Note2 is stuck at booting animation for more than 10 minutes after Step 7 Part1 then follow below instructions:
Go to recovery mode. To do so, press and hold the Volume Up, Home and Power buttons together.
Now perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode wipe cache/dalvik one last time before reboot.
Please note, performing wiping task will erase your device internal memory data and not external SD card data.
That’s it! Let us know about your latest Android 4.3 Jelly Bean experience.
Click to expand...
Click to collapse
To downgrade 4.3 I317UCUBMJ4 bootloader...( ATT only for now)
Thanx to @Seanscreams
Go here for instructions and >>[LINK]<<
For some FAQ answers go >>[HERE]<<
Thank you this^^^^^^Zen Arcade
Donations
Donation from kdiff 0GX436403M4020453

Mine.....
Here is theOne Click Odin File...
Please Note The above^^^^^^ file does include Knox security!!!
Its the original Leak 4.3 firmware
Instructions for using the above file.
Follow Part 1 from above. Steps 3-5
Step 3. Now turn off you device and wait for few seconds. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 4. Now your Note is in download mode, Connect your device to the PC with USB cable.
Step 5. Launch Odin File above on the computer and the ID: COM box of your ODIN Screen will turn to light blue with the COM port number. This means your device is connected successfully with the app.
Click to expand...
Click to collapse
Then hit start Odin will do it's thing, and then you'll have the 4.3 Bootloader.

Reserved...

And 1 more just in case...

Well done.
Sent from my SAMSUNG-SGH-I317 using Tapatalk

mindmajick said:
Well done.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Thanx man appreciate it!

Wrong Thread, please ignore me
Geeve

mindmajick said:
Well done.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Awesome! This should end some of the questions that are.......um......repeated? maybe? Nice work!

dmxinc said:
Awesome! This should end some of the questions that are.......um......repeated? maybe? Nice work!
Click to expand...
Click to collapse
Nah.. lol. But now I can yell at people and tell them they haven't searched hard enough
Sent from my SAMSUNG-SGH-I317 using Tapatalk

geeve420 said:
Thank you so much for this!! I was wondering just today if this was possible yet. It is nice to see it all in one place!
So does triangle away work to clear the binary? I know knox is undoable as of now, but wondering about the other counters.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Thanx:thumbup:
As far as the triangle away working, I actually haven't ran it in awhile. Flashing much all the time.
But last time I used it, was on my TMO GN2 after I Odin back to stock.
But I'm getting ready to clean out my phone soon. So I'll test it and see if it works...

Looks great - nice job!
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

Exelent contribution...
Enviado desde mi GT-N7105 mediante Tapatalk

mataflakitas said:
Exelent contribution...
Enviado desde mi GT-N7105 mediante Tapatalk
Click to expand...
Click to collapse
Thanx bro...:thumbup:
SENT FROM MY SAMMY TO YOUR EYES USING TAPTALK?

Nice guide bro well done ?
Sent from my SGH-I317 using XDA Premium 4 mobile app

Thanks for the great step by step! I have one question just for clarification before proceeding on my wifes phone. Can I flash any rom or am I stuck with only 4.3 based roms? My wife absolutely hates all changes in the stock 4.3 update and wants back to the 4.1 she was on before.

scottyb0721 said:
Thanks for the great step by step! I have one question just for clarification before proceeding on my wifes phone. Can I flash any rom or am I stuck with only 4.3 based roms? My wife absolutely hates all changes in the stock 4.3 update and wants back to the 4.1 she was on before.
Click to expand...
Click to collapse
same question. plus if i do this, would it change my knox status?

scottyb0721 said:
Thanks for the great step by step! I have one question just for clarification before proceeding on my wifes phone. Can I flash any rom or am I stuck with only 4.3 based roms? My wife absolutely hates all changes in the stock 4.3 update and wants back to the 4.1 she was on before.
Click to expand...
Click to collapse
Any rom.
xuanphucn said:
same question. plus if i do this, would it change my knox status?
Click to expand...
Click to collapse
It won't reset it to 0x0 if that's what you are asking.
Sent from my SAMSUNG-SGH-I317 using Tapatalk

mindmajick said:
Any rom.
It won't reset it to 0x0 if that's what you are asking.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
my knox status is 0x0. would it still remain 0x0 if I do this?

xuanphucn said:
my knox status is 0x0. would it still remain 0x0 if I do this?
Click to expand...
Click to collapse
If you root or install custom recovery or do practically anything (if you are on stock 4.3)... Knox will be tripped. No takebacks.
Sent from my SAMSUNG-SGH-I317 using Tapatalk

mindmajick said:
If you root or install custom recovery or do practically anything (if you are on stock 4.3)... Knox will be tripped. No takebacks.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
thats unfortunate

ROM [20140920]VUPMP.GPRO.sG3.Stable for LG GPRO: F240 L/S/K, E98x, Gx.

*/ ROM INFORMATION:
→ Full theme LG G3
→ Support all hottest functions of LG Smartphone: Split window, Slide aside, GuestMode, LG G3 Weather theme, Lgmemoplus, ...
→ Latest GApps
→ Stable
→ Support English and Vietnamese
→ and more...
*/ DOWNLOAD:
- Download link (1,0Gb - MD5: C61D1EAC - D9D30E47 - 761D9431 - 4C60299A)
*/ INSTALL:
- Install lastest stock firmware
- Root and install Recovery
- Download rom → Copy rom into internal memory or SD card
- Boot into Recovery mode
- Full Wipe (Dalvik, Cache, System & Data)
- Install the ROM by choose your variant in Aroma
- Reboot and run first install
- Input 5457#*988# from dial pad
- Find "Network Mode" set value "Global + LTE"
- Find "CDMA Subsciption" set value "USIM"
- Reboot
- Enjoy
*/ DONATE:
If you like my work, please click here to buy me a beer. Thank you!
*/ FAQs:
*/ PATCH FIX-UPDATE:
→ Fix Video Recording (Specical thanks to Chairizkuro)
*/ IMAGES:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

whats the difference between this rom & 3.0 final?

coldfear00 said:
whats the difference between this rom & 3.0 final?
Click to expand...
Click to collapse
Base on latest stock rom, Lgmemoplus, Weathertheme g3,...

Which languages are supported?

zaldax said:
Which languages are supported?
Click to expand...
Click to collapse
+1

how can i get Russian and Turkish languages?
i m using close beta. is the stable better?

Can i just flash this over stable 3.0..? I use an e988
Sent from my LG-E988 using XDA Free mobile app

Can i flash it on e988 version

alok1663 said:
Can i flash it on e988 version
Click to expand...
Click to collapse
:good:

I tried to install your rom. I was on stock 4.1.2 rooted and I have e980 at&t. I had twrp 2.6.3 installed and in options I chose to keep the recovery as it is. After flashing the zip, file Installation of zip file failed appeared and I ignored it and rebooted the mobile hoping to run the rom. But since then my phone is stuck on Lg logo. I can't boot into Twrp recovery as well and I try to boot into recovery it doesn't boot up instead phone is again stuck on Lg logo. I can't boot to bootloader either. What should I do to recover my phone? Please help !!!

Installation zip corrupted error

munirshah77 said:
I tried to install your rom. I was on stock 4.1.2 rooted and I have e980 at&t. I had twrp 2.6.3 installed and in options I chose to keep the recovery as it is. After flashing the zip, file Installation of zip file failed appeared and I ignored it and rebooted the mobile hoping to run the rom. But since then my phone is stuck on Lg logo. I can't boot into Twrp recovery as well and I try to boot into recovery it doesn't boot up instead phone is again stuck on Lg logo. I can't boot to bootloader either. What should I do to recover my phone? Please help !!!
Click to expand...
Click to collapse
Soft brick, you need to tot back to stock, there is no other way. This rom doesn't exactly play well with e980 since it is based on f240, and to avoid that brick you have to install Phils recovery

luisoman2000 said:
Soft brick, you need to tot back to stock, there is no other way. This rom doesn't exactly play well with e980 since it is based on f240, and to avoid that brick you have to install Phils recovery
Click to expand...
Click to collapse
How do I flash the tot file for stock? I can't get into download mode. All I get is the phone stuck on Lg screen. How do I flash philz recovery?

munirshah77 said:
How do I flash the tot file for stock? I can't get into download mode. All I get is the phone stuck on Lg screen. How do I flash philz recovery?
Click to expand...
Click to collapse
go to the main section, find the topic on going back to stock. Instructions are clear in that post. If you decide to try this rom again, don't select keep current revory. the rom is good, but installing on e980 is a bit tricky. Some people have no problems with it.

Home button LED stops working after 10mins of boot, it used to work fine in 3.0 final.
which file controls the LED function? it might start functioning again if i swap it with the 3.0 final version.

luisoman2000 said:
go to the main section, find the topic on going back to stock. Instructions are clear in that post. If you decide to try this rom again, don't select keep current revory. the rom is good, but installing on e980 is a bit tricky. Some people have no problems with it.
Click to expand...
Click to collapse
I can't get into download mode. Whenever I try to get into download mode using the volume up and power key, I end up on the same lg screen. All methods for installing stock rom that I have seen involve booting into download mode. Please help!!!!!!!!!!!!!!!!!!!!!

munirshah77 said:
I can't get into download mode. Whenever I try to get into download mode using the volume up and power key, I end up on the same lg screen. All methods for installing stock rom that I have seen involve booting into download mode. Please help!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
where did u read that download mode is accessed by volume up & power key?
anyways to get into download mode u have to press volume up & volume down at the same time & plug in the usb cable.

coldfear00 said:
where did u read that download mode is accessed by volume up & power key?
anyways to get into download mode u have to press volume up & volume down at the same time & plug in the usb cable.
Click to expand...
Click to collapse
turn off your phone → hold Volume up + volume down and plug in the usb cable:good:

datphu2811 said:
turn off your phone → hold Volume up + volume down and plug in the usb cable:good:
Click to expand...
Click to collapse
is it possible to edit the dual window menu, asking this because its showing 3 contacts icon in that menu & i want to remove the extra 2 icons, aint an issue just looks annoying

Camera fix
Is there a known fix for the camera issue on E980? Video recording being broken is very sad...

M8 Stock recovery

hey XDA, I've got an M8 on Wind Mobile with clockworkmod and a stock ROM, and there's a system update I can't take without the stock recovery. I searched all over the place, but couldn't find the correct recovery. Can someone point me to the download or upload the stock recovery from their phone pretty please? The CID on this phone is GLOBA001. Bootloader unlocked, and S-ON.

Download OTA, select install later. Copy OTA zip from internal storage/Download to PC.
Open OTA zip with 7-zip, open firmware.zip, extract out recovery.img
Use this extracted recovery.img then continue OTA

Ninja'd......

ckpv5 said:
Download OTA, select install later. Copy OTA zip from internal storage/Download to PC.
Open OTA zip with 7-zip, open firmware.zip, extract out recovery.img
Use this extracted recovery.img then continue OTA
Click to expand...
Click to collapse
I'll give that a try, thanks

Hey, I downloaded the OTA but I cant find the file anywhere. I tried OTA snatcher, but nothing happens. I cant even find the file at all. I do have root. how else can I get the OTA onto my PC?
EDIT: Never mind I got it. flashed the recovery but its still not taking the update, it just hangs on the white htc screen. cant boot into the stock recovery at all.
Maybe I'll just start a new thread then...

There is no need for a new thread. Keep everything in one thread. So anyone willing to help you can easily find info on your problem.
Have you try press & hold both power and volume up button, when it goes black quickly release both buttons and press & hold volume down button. This will take youto hboot then select recovery and check whether stock recovery is properly installed.

ckpv5 said:
There is no need for a new thread. Keep everything in one thread. So anyone willing to help you can easily find info on your problem.
Have you try press & hold both power and volume up button, when it goes black quickly release both buttons and press & hold volume down button. This will take youto hboot then select recovery and check whether stock recovery is properly installed.
Click to expand...
Click to collapse
tried that many times. When I select recovery, it just hangs on the white htc screen forever, never booting into the recovery and I have to force reboot it. The only recovery that seems to boot is clockworkmod...

Just forget about entering the stock recovery for awhile as there is no reason for you to go in there except to check the error log when doing update.
After you installed the stock recovery (fastboot flash recovery recovery.img), reboot and do OTA again, download and select install ... what happen then ?

ckpv5 said:
Just forget about entering the stock recovery for awhile as there is no reason for you to go in there except to check the error log when doing update.
After you installed the stock recovery (fastboot flash recovery recovery.img), reboot and do OTA again, download and select install ... what happen then ?
Click to expand...
Click to collapse
Exactly the same thing...reboots, and just hangs on the white screen until I force reboot

bbmaster123 said:
Exactly the same thing...reboots, and just hangs on the white screen until I force reboot
Click to expand...
Click to collapse
Then it boot back to your old version without OTA updating ?
What's your old version no. ?
I know WIND is a rare version around here, don't see any stock backup anywhere.

ckpv5 said:
Then it boot back to your old version without OTA updating ?
What's your old version no. ?
I know WIND is a rare version around here, don't see any stock backup anywhere.
Click to expand...
Click to collapse
Yes, then it boots back up normally into the old version, 4.4.2 and asks to apply the update again.

bbmaster123 said:
Yes, then it boots back up normally into the old version, 4.4.2 and asks to apply the update again.
Click to expand...
Click to collapse
I feel it's odd that it didn't go to recovery when you correctly installed a stock recovery. If the recovery image is wrong version, it still go to recovery and give error mark (the famous red triangle) but yours it just hang .. I run out of idea.
If you have time, maybe you can make a nandroid backup of boot & system (don't need data as it contains your data) and upload for me to have a look at it. Then I can rebuild the nandroid for others too. So far I don't see any Wind backup at all on XDA or anywhere on the internet. So it's up to you. If you do, you can put in dropbox or Drive and PM me the link.

ckpv5 said:
I feel it's odd that it didn't go to recovery when you correctly installed a stock recovery. If the recovery image is wrong version, it still go to recovery and give error mark (the famous red triangle) but yours it just hang .. I run out of idea.
If you have time, maybe you can make a nandroid backup of boot & system (don't need data as it contains your data) and upload for me to have a look at it. Then I can rebuild the nandroid for others too. So far I don't see any Wind backup at all on XDA or anywhere on the internet. So it's up to you. If you do, you can put in dropbox or Drive and PM me the link.
Click to expand...
Click to collapse
okay, I'll do that next time I have the phone (its actually my friend's and I'm helping him out). I'll post the link in this thread when I upload it.

bbmaster123 said:
okay, I'll do that next time I have the phone (its actually my friend's and I'm helping him out). I'll post the link in this thread when I upload it.
Click to expand...
Click to collapse
In case anyone wondering what happen to this case ....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
all files will be uploaded in a few days time.

TUTORIAL- How To- Downgrade To Lolipop 5.1.1, Galaxy S6 edge+ [UPDATED GUIDE]

- WARNING -
This Guide is not failproof, if you do anything wrong with your device while following this guide, i won't be held responsible if you brick or hard damage your device. I insist about that but you must extract all of your data (Photos, Videos, Music, Apps, Accounts, Messages, ETC) Before proceeding or else you will end up with a loss of data, again i'm still not responsible if you lose all of your data without backing up. I WARNED YOU.
Well, you have a Galaxy S6 edge+ lying around and you want to get back to Lolipop? You want to downgrade? Well then you're in the right place!
So......downgrading to lolipop...... some people claimed it can be done by deleting some file in the odin .tar but that never worked for me.
If you have the sw rev check fail error upon downgrading....this is the guide for you!
This will wipe all your data including internal storage (depending on how you do it)
Confirmed working on my Galaxy S6 edge+ SM-G928F [It should work on Note5 but no promises from now on]
Advantages :
Downgrade procedure is safe, simple.
Your phone should boot faster
battery life should last longer [i said it should]
You can get the animated lock screen animations back.
Get old touchwiz back. [i like the 5.1.1 version]
disadvantages:
1. You cannot boot TWRP while on the downgraded bootloader
2. You will only have system-wide root. DO NOT flash systemless or it will not boot (but nobody cares)
3. Fingerprint is not working (still working on that)
4. You can only flash stock nougat from odin. You cannot flash lolipop, marshmallow tar,twrp tar,cf auto root tar or anything else [except if you have a combination firmware]
Ok, let's get started.
Requirements :
A laptop or home PC : At least running Windows 8/8.1 or Windows 10
Your device
Genuine Samsung charging cable [NOT SPONSERED]
Stable internet connection.
Files :
The lastest SAMSUNG Drivers which can be found here : https://developer.samsung.com/android-usb-driver
Odin3 : https://www.samsungodindownload.com/fr/download-for-windows
The firmware you want to downgrade to : I will link my ROM so u can install it.
TWRP [Newest version] : https://twrp.me/samsung/samsunggalaxys6edgeplus.html
Classy Kitchen [for bulding your rom] : https://forum.xda-developers.com/t/...kitchen-for-android-roms-development.3862584/
Now let's get started!
Let's start first by cooking the ROM! Open Classy Kitchen, and then open the ROM you want to use :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Normally the first time you open the program, there shouldn't be any project [except if you used this app before]
Next click "Create new project", "From PC (Browse for one)"
And then chose the path where you saved your firmware. After chosing your firmware, Classy Kitchen will open the firmware automaticly.
After the ROM is now open, click on "ROM utils" and then click on "Deodex ROM" After you Deodex the ROM, we will have to de-bloat it.
On Classy Kitchen, click on "Debloat / Re-Bloat ROM" to Debloat your ROM.
Last step [optional] We will have to De-Knox our ROM. (again optional) But De-Knoxing our ROM can save a lot of space in our phone storage. So i recommend you do.
After De-Knoxing our ROM, we will have to disable DM-Verity Force Encryption in order to Boot into the ROM [Otherwise if you don't your phone will never boot]
Click on "Remove DM-Verity / Force Encryption"
Next that we disabled DM-Verity, We will have to remove the "meta-inf installer"
Click on "Re-Build META-INF installer" and click on remove.
Finally once we have done the modifications on our ROM, we just have to save.
Click on "Build (system.new.dat) ROM (for recovery)"
and then we are done cooking our ROM!
But the guide is not done yet. We will have to install TWRP in the phone.
HOW-TO-PROCEED?
Step-1 Press and hold the power button on your device
Step-2 Chose "Power Off"
Wait for your device to completly Shut-Off.
Step-3 Re-Boot in download mode "odin mode"
Step-4 connect the phone to your computer
Step-5 open Odin3
In Odin, we will have to install TWRP, click on the AP box and chose your TWRP file [the one that you downloaded]
Don't forget to disable "Auto-Reboot" after installation, otherwise your phone will re-boot normal into Android.
At this point, Knox is tripped in your device meaning that your warranty is now expired. Also the Knox features are no longer usable.
On TWRP, click on wipe, "Format Data". A keyboard will pop-up, type "yes"
Type "yes"
Once Data Format is completed, hit home, reboot, recovery.
your phone will reboot into recovery again, hit wipe again, this time we won't format data. Instead we're going to wipe the phone's partitions
Chose in TWRP,
Then swipe to wipe. Then hit home again. Next hit "Install"
Install the ROM you just made with Classy Kitchen. It can be found in "Documents" - "Output" - "Your-ROM"
Transfert it to your phone
Click on the ROM / ZIP file and "swipe to confirm flash"
After the flashing procedure is complete, you will have to wipe the "cache" / Dalvik.
Hit "wipe dalvik/cache"
Then "swipe to wipe"
After you wiped the cache, hit "Reboot System" and hit "Do Not Install"
One last step before you get back to Lolipop. You will need a custom Bootloader in order to boot.
Just download my "custom Bootloader" https://drive.google.com/file/d/1207Guvk8J_L9FSJv2C9BpkeLpWkXtViQ/view?usp=drive_link
After you downloaded my "custom bootloader" you will have to install it.
so get Odin3 and install my bootloader!
After the Bootloader installation is complete, you just have to reboot your device, cross your fingers and hope it boots!
Congratuations! You are back on Lolipop! Enjoy!
1 : If you want to flash a mod in TWRP, you will have to put your phone in download mode, install the stock bootloader in BL tab, install TWRP in AP tab and then click on "start"
2 : If you want to get back into marshmallow / Nougat, you just have to flash stock firmware in Odin3
If you have any issues or any questions, you can DM me but it isn't guaranteed that i will reply.

Here are some screenshots of Lolipop :

Here the device i used.

what about system sound because on 6.1.1 (sorry 6.0.1) sound was weird and glitchy idk why
oh btw i need a access the drive to download bootloader

iskender4444 said:
what about system sound because on 6.1.1 sound was weird and glitchy idk why
oh btw i need a access the drive to download bootloader
View attachment 5922017
Click to expand...
Click to collapse
Nevermind. This comment is deleted

iskender4444 said:
what about system sound because on 6.1.1 sound was weird and glitchy idk why
oh btw i need a access the drive to download bootloader
View attachment 5922017
Click to expand...
Click to collapse
Actually
iskender4444 said:
what about system sound because on 6.1.1 sound was weird and glitchy idk why
oh btw i need a access the drive to download bootloader
View attachment 5922017
Click to expand...
Click to collapse
Try download downloading my bootloader again. I made it public

TheWiiGuy said:
Actually
Try download downloading my bootloader again. I made it public
Click to expand...
Click to collapse
Why sound coming like creepy from buzzer only on 6.1.1 interesting..

iskender4444 said:
Why sound coming like creepy from buzzer only on 6.1.1 interesting..
Click to expand...
Click to collapse
Have you downgraded to Lollipop yet?

TheWiiGuy said:
Have you downgraded to Lollipop yet?
Click to expand...
Click to collapse
i had bootloop on samsung galaxy s6 edge plus here the photo:

and can you share the twrp? and is this correct one?
"twrp-3.1.1-0-zenlte.img"

iskender4444 said:
and can you share the twrp? and is this correct one?
"twrp-3.1.1-0-zenlte.img"
Click to expand...
Click to collapse
Yes. This is The Good TWRP. Are you trying to get into recovery? If not then there is a problem with my bootloader
Mind if i upload the New bootloader tomorrow?

iskender4444 said:
i had bootloop on samsung galaxy s6 edge plus here the photo:
Click to expand...
Click to collapse
It looks like the phone is trying to get into stock recovery.

TheWiiGuy said:
It looks like the phone is trying to get into stock recovery.
Click to expand...
Click to collapse
idk and i dont get it why doing this i just re-download twrp official website and still same issue i just flash the twrp but can't enter twrp recovery right know.

iskender4444 said:
idk and i dont get it why doing this i just re-download twrp official website and still same issue i just flash the twrp but can't enter twrp recovery right know.
Click to expand...
Click to collapse
Actually i forgot to mention that you can't boot into TWRP on My custom bootloader. Get back in odin. Re-flash stock bootloader in BL Tab and flash TWRP in the AP Tab. Then try to re-boot onto Custom recovery. Tell me some news.

TheWiiGuy said:
Actually i forgot to mention that you can't boot into TWRP on My custom bootloader. Get back in odin. Re-flash stock bootloader in BL Tab and flash TWRP in the AP Tab. Then try to re-boot onto Custom recovery. Tell me some news.
Click to expand...
Click to collapse
Oh yes. Have you backed up all of your partitions on TWRP?

TheWiiGuy said:
Oh yes. Have you backed up all of your partitions on TWRP?
Click to expand...
Click to collapse
i solved twrp but can't boot same as issue on picture

iskender4444 said:
i solved twrp but can't boot same as issue on picture
Click to expand...
Click to collapse
So you can boot onto TWRP ?
OK. I see the problem.
I Will upload my New bootloader tomorrow.
The current bootloader does not allow to Boot onto TWRP and it can't boot into stock recovery either.
Hopefully the New bootloader should fix your problem. It has stock recovery

TheWiiGuy said:
So you can boot onto TWRP ?
OK. I see the problem.
I Will upload my New bootloader tomorrow.
The current bootloader does not allow to Boot onto TWRP and it can't boot into stock recovery either.
Hopefully the New bootloader should fix your problem. It has stock recovery
Click to expand...
Click to collapse
i have another problem i was trying to flash stock 7.0 rom but gives error same like this.

iskender4444 said:
i have another problem i was trying to flash stock 7.0 rom but gives error same like this.
Click to expand...
Click to collapse
Nevermind this comment is deleted

TheWiiGuy said:
What is your phone model number? I see you are installing firmware for a sm-g780f.
Click to expand...
Click to collapse
no this is for example man mine was g928c