Related
Edit: Still not fixed. Any help would be appreciated.
Hi all. I'm currently using MIUI and want to swith to CM7 for 2.3 and 4G. I've been on the Cyanogen forums but to no avail. I have so far tried the following...
1. Flash from MIUI to CM7 #8 through rommanager with wipe.
2. Flash from MIUI to CM7 nightly 8, 12, 17 through Clockwork with full data and cache wipe.
3. Flash from MIUI to CM6 to CM7 through clockwork w/ full wipe.
4. Flash Amons recovery in rommanager and flash from MIUI to CM7 nightly 17 w/ full wipe.
I am currently at a loss. Please throw any suggestions my way.
- Nick
What exactly are you wiping when you say full wipe?
Try flashing calkulin's format_all.zip, then cyanogenmod, then gapps, all within one recovery session (no rebooting/restarting between flashing each one)
Sent from my hand with XDA Premium installed
Try a full wipe, cache, dalvik, and data. Then reflash the rom.
By full wipe I mean data/factory reset, then wipe cache, then dalvik.
Trying Calkulin now. On Cyanogen forum someone suggested a different kernel. I've never flashed only just a kernel. Would I use the same method as flashing other zips?
That's correct, just wipe dalvik and cache before doing so.
So, I did the calculkin format all however I also did something different this time. I started to notice that it would only boot loop after I did a Titanium batch restore. I would normally restore all apps and system data. This time I only restored apps instead of system data and I can reboot just fine... for now.
Would this cause a problem? Restoring system data from a backup inside MIUI and restoring it in CM?
Edit: Now it's stuck at the white screen. Doing a nandroid backup and going to try some other fun stuff. Yay...
I use amon RA recovery and when I was stuck in a boot loop I would wipe data/factory reset, cache, dalvik cache, as well as wipe the system. That did the trick for me. Best of luck!
PS. Not sure of you can wipe system via clockwork mod, I used it briefly before I got aggravated and flashed a better recovery img IMO.
hTC Evo CM7-n17
You can do a full wipe in clockwork:
factory/data reset, and wipe cache from the main screen, then navigate to advanced and then wipe dalvik cache.
The reason I've been using clockwork is because I like using Rom Manager, but I'm not against Amon if it's the answer. Though, I've now tried it, and it doesn't seem to be.
I've been doing the wipes you're suggesting since the beginning. Those aren't doing it. I have a few ideas that I didn't try last night. Gave up after about hour 7 of trying different things.
My next experiment is to switch kernels. But I'm also thinking there could be a problem w/ my Titanium backup. I don't remember specifically, because I didn't notice it at first, but it does seem to only have a problem after I do a restore. Any thoughts on that one??
deaconzero said:
The reason I've been using clockwork is because I like using Rom Manager, but I'm not against Amon if it's the answer. Though, I've now tried it, and it doesn't seem to be.
I've been doing the wipes you're suggesting since the beginning. Those aren't doing it. I have a few ideas that I didn't try last night. Gave up after about hour 7 of trying different things.
My next experiment is to switch kernels. But I'm also thinking there could be a problem w/ my Titanium backup. I don't remember specifically, because I didn't notice it at first, but it does seem to only have a problem after I do a restore. Any thoughts on that one??
Click to expand...
Click to collapse
Well amon_ra isn't the answer. I've used clockwork and had ZERO problems, and still use it. But if you think titanium is your issue, go into it, and click problems, and it'll download the busybox and correct itself. And if you think the kernel may be the problem, it could be, so go for it. Just make sure to use an aosp kernel on an aosp rom, and the same for sense; don't mix them.
Thanks for the advice. Any suggestions on which kernel I could try? On MIUI my kernel is brandon-ThinkPad-T510 #5.
deaconzero said:
Thanks for the advice. Any suggestions on which kernel I could try? On MIUI my kernel is brandon-ThinkPad-T510 #5.
Click to expand...
Click to collapse
Well I would try the a froyo savaged zen kernel. They all play nice from what I hear.
No fix yet even after switching kernels. I found this link when I was looking up more info http://www.shahz.net/android/what-is-dalvik-cache.html and this section interested me.
"This dalvik cache can grow immensely huge as more applications are installed on your phone. It is safe to wipe dalvik-cache. It will be rebuilt again when the phone boots. This also explains why your phone takes ages to start up for the first time. As for my Nexus One, having about 145 applications installed, it takes about 13 minutes to build the cache"
Could this be what's going on? Is the dalvik cache being rebuilt and I'm not actually getting a bootloop? Do I need to let the blue arrow circle around the skating android for 15 minutes?
Still not working. Tried the kernel switch and the above idea of letting the boot screen run for over 20 minutes. Nothing.
Anyone w/ any thoughts?? Thanks.
Are you flashing the new kernel the same time you flash the rom. What you should do is wipe everything, factory/data, cahe, dalvik cache, then flash the rom. Give it a couple of minutes to boot up. After it eventually boots up, back it up, then flash the new kernel, just wipe the cache and dalvik before you do so.
deaconzero said:
So, I did the calculkin format all however I also did something different this time. I started to notice that it would only boot loop after I did a Titanium batch restore. I would normally restore all apps and system data. This time I only restored apps instead of system data and I can reboot just fine... for now.
Would this cause a problem? Restoring system data from a backup inside MIUI and restoring it in CM?
Edit: Now it's stuck at the white screen. Doing a nandroid backup and going to try some other fun stuff. Yay...
Click to expand...
Click to collapse
Restoring system data through Titanium Backup is almost a certain recipe for disaster - especially when switching between different ROMs. Use TB only to restore user apps, and the data associated with only those apps.
The other thing you may want to try is to repartition/format your SD card. Make sure you back it up to your computer first, then use whatever recovery (I know Amon Ra will do it, think CWM will too) to partition and format the SD card. This helped me out when I was getting bootloops...
Good luck!
BigJohn
I had flashed Warm TwoPointThree. Didn't really like it so I restored to my nandroid back up. Now the phone randomly crashes for no apparent reason. It is sitting next to me on my desk and just now it crashed, wasn't even touching it. Secondary to the crashes is that after it happen and I try to report the phone is registering no charge and then immediately shuts down till I put it on a charger, regardless of actual battery charge.
Edit
More info. It has never crashed while on the charger. Don't know if that is relevant.
Did you wipe properly prior to restoring your nandroid? Also, what recovery are you using? If it's not Amon-ra, you need to get it! Make sure when doing a nandroid restore you have the appropriate items checked for restore (Assuming you did this when making the nandroid to begin with). Usually Boot, System, Data, and SD ext if partitioned.
Im using Amon-ra and I have an unpartitioned SD card. What do you mean by wipe? I'm a new to the entire rooting thing.
You need to wipe all data factory reset, boot, system, and dalvik cache in recovery three times each. Then restore your nandroid. You can also use a superwipe script but I feel manually wiping them is best.
Sent from my PC36100 using XDA
dieselford said:
You need to wipe all data factory reset, boot, system, and dalvik cache in recovery three times each. Then restore your nandroid. You can also use a superwipe script but I feel manually wiping them is best.
Sent from my PC36100 using XDA
Click to expand...
Click to collapse
Can I use the wipe feature in Amon-ra to do this?
Yes. That is the way to do it.
Sent from my PC36100 using xda premium
Try fix permissions, I think RA has it under other, or if u have Rom manager there is an option to fix permissions
Sent from my Synergized Aggressive Lionfish Evo using the XDA app
I think I may have found a problem with the backup I was using. For some reason the backup file had 2 copies of every entry.
Under the other tad in RA recovery there was options to fix apk uid mismatches and move recovery.log to SD.
I selected the fix apk uid mismatches. Im hoping that is the fix permissions that the previous poster was talking about. If not then can I get some direction in doing it properly?
SabaBoBaba said:
I think I may have found a problem with the backup I was using. For some reason the backup file had 2 copies of every entry.
Under the other tad in RA recovery there was options to fix apk uid mismatches and move recovery.log to SD.
I selected the fix apk uid mismatches. Im hoping that is the fix permissions that the previous poster was talking about. If not then can I get some direction in doing it properly?
Click to expand...
Click to collapse
Yes that's it.
Well the crashes have started again. They seem to start slow, one crash then like 3 days later another and then just increase in frequency, today it crashed 5 times before noon. I'm at the point that I think perhaps I need to wipe and not attempt to do a restore. My concern is will I lose my root if I do that?
Will I lose root if I do wipe with out restoring afterward?
SabaBoBaba said:
Will I lose root if I do wipe with out restoring afterward?
Click to expand...
Click to collapse
If you wipe without restoring, you won't have a ROM on your device. You'll have to flash one, and as long as it's a custom or rooted stock ROM, you'll be fine.
Well I did a factory reset tonight so we'll see how that goes. Thanks to those people who contributed.
Well I did the factory reset and this morning it crashed again. I'm at a loss. All this started after I installed the Warm 2.3 ROM and then restored back to a backup to get the stock ROM back. Any thoughts on what to try now?
Any further help that anyone can offer on this. I'm at the end of what I can think of to do
SabaBoBaba said:
Any further help that anyone can offer on this. I'm at the end of what I can think of to do
Click to expand...
Click to collapse
Just stop restoring and flash a ROM from scratch. Do a full wipe (everything except SD card), and then flash the ROM (custom or stock) or your choice. It seems that the restore is at the root of your problem, so it may be time to give up on that.
Current ROM (BootManager Slot 5): ICS-Deck-PreBeta20 | Kernel: Mason v0.14 SBC (FSO)
Captain_Throwback said:
Just stop restoring and flash a ROM from scratch. Do a full wipe (everything except SD card), and then flash the ROM (custom or stock) or your choice. It seems that the restore is at the root of your problem, so it may be time to give up on that.
Current ROM (BootManager Slot 5): ICS-Deck-PreBeta20 | Kernel: Mason v0.14 SBC (FSO)
Click to expand...
Click to collapse
Well Im going to flash this http://forum.xda-developers.com/showthread.php?t=1455340&highlight=stock+rom and see if that works. Thanks for the assist.
After wiping last night and loading the rooted version of the latest stock ROM it crashed again today. Next idea?
Try wiping in recovery by flashing Edify_Format_ALL (found on xda). I manually wipe Dalvik, habit... Flash rom from scratch. I use Titanium Backup to back up apps and data just for these situations. Some caches are moved to SD card, maybe delete these folders and let system rebuild them. (ie android_secure).
Hope you get it sorted out.
Grizraz said:
Try wiping in recovery by flashing Edify_Format_ALL (found on xda). I manually wipe Dalvik, habit... Flash rom from scratch. I use Titanium Backup to back up apps and data just for these situations. Some caches are moved to SD card, maybe delete these folders and let system rebuild them. (ie android_secure).
Hope you get it sorted out.
Click to expand...
Click to collapse
Ill give that a shot. I hope I can fix what ever I did to foul this thing up.
Just from searching the forums I really dont understand this edify thing. Can you help be get some clarity on it?
I tried installing a rom last week on my Galaxy Note II (Rogers), i followed orders (this isn't my first time flashing roms), and it has been stuck in a constant boot loop.
I've tried everything, wiping cache, factory reset, tried to flash different roms, etc....
I am a mac user (which means Odin isn't an option).
If you guys have any suggestions on how to fix this it would be greatly appreciated.
What rom were you on and what rom were you trying to flash originally? Also what recovery are you using? Need a little more info because usually wiping caches dies the trick. Provide a link to the rom you were trying to flash of your can.
jethro650 said:
What rom were you on and what rom were you trying to flash originally? Also what recovery are you using? Need a little more info because usually wiping caches dies the trick. Provide a link to the rom you were trying to flash of your can.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1986893
This is the rom, i was using CMW to flash it, then it made me switch to TWRP (think its called that)......hope that helps.
Sorry I can't be of more help aside of redoing the installation of your recovery and redownloading the rom ( bad downloads happen) and making sure you do all the wipes (cache, dalvik cache and factory reset). If none of that works I'm sure someone more knowledgable than myself will chime in.
I've never run into a bootloop problem myself, but this might help you out :
hxxp://galaxynote2root.com/galaxy-note-2-tutorials/how-to-unrootunbrick-galaxy-note-2-with-stock-firmware/
Good luck
Have you had any luck with this yet? I've been unable to get my phone back up.
QuantumPSI said:
Have you had any luck with this yet? I've been unable to get my phone back up.
Click to expand...
Click to collapse
No luck, but then again i am a Mac user, so its a little more difficult for me to solve this problem.
Anirchy said:
I tried installing a rom last week on my Galaxy Note II (Rogers), i followed orders (this isn't my first time flashing roms), and it has been stuck in a constant boot loop.
I've tried everything, wiping cache, factory reset, tried to flash different roms, etc....
I am a mac user (which means Odin isn't an option).
If you guys have any suggestions on how to fix this it would be greatly appreciated.
Click to expand...
Click to collapse
Put another ROM on an sdcard. Take your battery out then press the button combo for recovery mode before you slip your battery back in. Then it'll force download mode. Reflash the new ROM after full wiping and you should be good.
Sent from my SGH-I317 using xda premium
Definitely a bad ROM. Run a MD5 checker against it prior to copying to the SD card. Note: your SD card could be the culprit.
If you have a recovery installed, ensure you WIPE everything, Fix permissions (i'm on CWM) and reflash the modem and carrier files POST rom install.
I experienced my first boot loop yesterday but I was able to recover from it thanks to a little common sense and patience. :fingers-crossed:
Good luck!
first of all, don't freak out, a bootloop isn't the end of the world. Sounds like it was a bad flash.
ppl above have obviously told you to wipe caches, and all that stuff and if it hasn't worked then you are still down and out.
I would suggest you get yourself into recovery - not going to explain that here as you said you were able to flash other roms and it didn't work and try flashing your nand backup - hopefully you have a nice clean backup from before you flashed. if so, clear caches, etc and then try flashing it it should be back to at least working.
your nand backup will have all your stuff in it as you would have had to backup from recovery, which means you'll at least still be rooted. you can then go ahead and get another rom - check the md5 and flash it
Long story short, I was running out of space and was thinking of deleting the backups from titanium backup but I think I accidently clicked Delete all user data and app.
Right now I can only access Download mode and CWM, whenever I tried to wipe install zip from sdcard it reboots, when I try to wipe data/factory reset it reboots, wipe cache partition it reboots, wipe davik it reboots help!!!
Lol. Flash stock with Odin
been there done that, doesn't work
nite4evr said:
been there done that, doesn't work
Click to expand...
Click to collapse
I don't see why odin shouldn't work
So your factory reset doesn't work?
Just dirty flashing a rom.
But really, odin should work at all times unless your phone's hard bricked
I found an old nandroid backup from when I first got my phone. Early when root, recovery etc came out. Flashed it once, it worked half way before reset, done it again and it worked.
Thank god!!!!!!! ALWAYS BACKUP KIDS, ALWAYS BACKUP!!
I tried to flash CWM through odin many times, CWM was still giving me trouble. It was wierd!
Dirty flash didn't work, it kept resetting.
Hi,
I was frustrated with the delay in T-Mobile's release of KitKat for the GSIII, so I decided to root my phone last night in order to try flashing CM11 on it. Rooted my phone with Towelroot, installed ROM Manager and CWM, and created backups on Kies and through CWM. Then I proceeded to do data wipe/factory reset, cache wipe, and /system format. Tried to flash CM11, but got a status 7 error.
I freaked out, so I decided to restore everything from the backup I'd created. Restoration seemed like a success, but now I get the error "Unfortunately, the process com.google.process.gapps has stopped" in an endless loop, and it prevents me and any apps from doing anything. I tried clearing dalvik cache in recovery, but the problem still persists. Read on a few threads that I should flash to stock firmware via Odin, but I'm currently on a macbook, so I can't install it.
tl;dr - Prepped to flash CM11, reached status 7 error, got freaked out, and did restore via CWM, only to get infinite loop of gapp crashes. No access to Odin or PC. Not hard bricked or soft bricked, but essentially useless phone. Help? );
if you can still get to recovery, download latest gapps and flash that
Did you factory reset before or after you restored your back up?
Yeah, I've tried flashing gapps--no avail.
And yeah, I did factory reset/data wipe, cache wipe, /system format 3x each before attempting to restore. Was that wrong? /:
Try to factory reset again
vvnn said:
Yeah, I've tried flashing gapps--no avail.
And yeah, I did factory reset/data wipe, cache wipe, /system format 3x each before attempting to restore. Was that wrong? /:
Click to expand...
Click to collapse
If I'm not mistaken, there is some device ID that will change each time you flash a new rom. It may be something to do with this ID not matching the one in the restored data. Purely a guess but seems logical to me.
Anyway, factory resetting will most likely solve this for you, but I wanted to add that except in certain circumstances, you shouldn't ever manually format /system. (and one format on any partition is sufficient. There shouldn't be any need to format multiple times). If you format /system, you are wiping the O/S off of your device. Then what happens if you have problems flashing a rom, or firmware? I've seen it happen many times and I often end up spending a couple of days working with them just to get the thing to boot up again!
When you flash a rom, the first thing it does is format /system. So there is just no need to do this manually. At least if the rom fails to flash (such as failing the assert checks), youll still have something to boot into. Hope this helps in the future!
I have had the exact same issue. I have a Samsung note 2 N7105. I rooted made a backup in CWM and flashed ditto n3/s5 rom made another backup in CWM. No issues. Got a bit cocky seen as it was my first time doing anything like that. My next adventure was to try a custom kernel (agni). This didn't go so well, so I tried to do a restorw to my working backup of ditto n3/s5 rom through CMW. restore went smoothly and the phone booted. once I opened the lock screen I got the gapps error as described. I had to do a factory reset to get the phone working and then re-flashed ditto n3/s3. I've since flashed other roms and when ever I try to do a restore, I get the issue described. Note I am using the latest CWM. I putting off flashing and trying any other ROMs because of this issue. I do love dn3/s5 but id love to try others. Anyone can help it would be appreciate.