Related
I'm not sure if this is the right place to ask this, please excuse my ignorant.
I have an EVO that won't charge. I've read a lot from Google search results that this is a common problem among many users. However, the port seems to be working, because my computer will recognize the phone and storage when I plug it in. The charge led will come on, and the indicator on the phone will say that it's charging, but the phone is actually only discharging while plugged in. Eventually the led will turn itself off, and the phone stops telling me that it's charging when the battery is down to its last drop.
I hope that someone with similar problem can help me with fixing this, or if anyone cause tell me if it's possible to fix? I want to send it in to HTC since I think the phone is under warranty, even if I don't have the protection plan from Sprint? The problem is the touch glass is cracks, and I don't know if they'll fix the USB port without saying that I broke it and won't cover that under the warranty. I want to buy a new screen and replace the broken one, but if I open up the phone it would void the warranty as well...
So I'm stuck with a discharging phone, cracked screen, and having to carry around 3 separate batteries everyday, and I have no idea what step I need to take.
Please help?
Have you tried plugging it into another charger? It may just be the charger that is screwed up. If this behavior pattern is consistent across multiple chargers then you may want to talk to Sprint to see what options you have.
Concordium said:
Have you tried plugging it into another charger? It may just be the charger that is screwed up. If this behavior pattern is consistent across multiple chargers then you may want to talk to Sprint to see what options you have.
Click to expand...
Click to collapse
Doubt it's the charger as it was stated that the computer connection works - should get a bit of a charge from that. I agree that a Sprint visit is due.
Just went through this myself! Would plug my phone in before bed and wake up with the phone at 2% or so. Thought it was the battery- so i took my battery to have the sprint store check it, they did say it was bad. So i bought 2 batteries off ebay.
I got the batteries and still had the issue. So then I took my phone to the sprint store and had them check the micro-usb port. They said it was fine and they cleaned it out cause dirt/dust was in it. Still had the problem..
So I bought a new micro-usb cable of monoprice (still using the same wall charger) , and that solved the issue! Had a bad cable. Now my phone charges super quickly in matter of 4hrs.
It could still be the charger. The USB cable sends data and power through different pins. So a bad cable could still transfer data while not pushing a charge.
Sent from my PC36100
It's gotta be the port happen to mine and I was able to get it fix as long as the port was still attached to the motherboard, if its not attached then have to go thru the insurance.
EVO with Identity Crisis
I was able to connect to my computer and send data just fine with the old (broken) usb cable.
I've tried three different cable and a car charger, same result; they all say the phone is charging but it only gets discharged. USB/storage connection works. Last time the Sprint store said the battery is faulty, but I have 3 different ones and neither will get charged with the phone plugged in, an external charger will work.
kzn said:
I've tried three different cable and a car charger, same result; they all say the phone is charging but it only gets discharged. USB/storage connection works. Last time the Sprint store said the battery is faulty, but I have 3 different ones and neither will get charged with the phone plugged in, an external charger will work.
Click to expand...
Click to collapse
Definitely sounds like a port issue then. If you return to Sprint and review what you've done, as well as the result of your previous trip, then they should be able to take care of you. If they try to tell you it's the battery again just stand your ground. Good luck.
I had a similar issue. I tried everything. It wasn't until I found my HTC cable that it started charging again. I work in IT and tried cables from everything I could get my hands on (blackberries, external drives etc. ) The cable that came with my phone was the only thing that worked.
Sent from my PC36100 using XDA App
Had same issue except couldnt sync. Eventually couldnt charge at all...Had port replaced ans can charge all day but no sync still....sucks but at least I can charge.
mexigga said:
Had same issue except couldnt sync. Eventually couldnt charge at all...Had port replaced ans can charge all day but no sync still....sucks but at least I can charge.
Click to expand...
Click to collapse
If you replaced the port yourself, I would love to know how to do it!
Took the phone back to Sprint and they said there's nothing they can do. I don't have the protection plan so I couldn't even pay the $100 to get it replaced (although I probably wouldn't as I can upgrade my contract and get a new phone soon). They also told me that HTC wouldn't cover it under their warranty because the screen is cracked and they will blame that on me for misused. I tried to check the warranty policy on HTC, but the page is not even available. Does anyone have experience dealing with HTC? I bought a replacement screen, I'd like to replace the screen but don't want to open up the phone if there's a chance HTC will fix the USB port...
HTC EVO 4G Won't - Stopped Charging Battery Issue
Hey Guys,
Two nights ago I woke up to an EVO that was plugged in with a Cellet
extractable charging cord, as it is just about every night. But, the phone was
still showing that it was charging the battery, animation with lighting bolt,
at only 50% charged after about 6.5 hours of charging. Hmmm....
The latter after trying to charge in the coffee shop first with Cellet chord in the
wall then a portable 3500mah solar portable charger; the phone not seeming to
charge at or past 50% charged.
My EVO is rooted but still with the stock ROM and the gingerbread 2.3.3 OTA
update. The battery is a Seido 1750mah and SetCPU is at 245 - 998mhz. The
phone has only been rooted for a few weeks, but I don't see where rooting
would interfere with battery charging.
I've pulled the battery out, several times to no avail. Switched back to the
stock battery, same results. However, if the battery is less than 50% full
the phone will charge the battery to 25% or 50%, weird. If the battery is
at 75% or more full, the phone will top off the charge to a green LED at 100%,
sometimes. Sometimes it won't fully charge the battery. Weird.
I read different posts regarding poor USB chords so I pulled out the stock
micro USB to USB, a charge only chord I figured, and am trying to top
off the Seido battery, which it seems to be doing as it's now full green but
still charging as the animation shows the bolt in the battery and the LED
is still orange.
If put the batteries in the Seido wall charger, the thing the size of a deck
of cards, both batteries fully charge.
I also use Screen Off by Iwashi Soft. That app has worked pretty well with just
a little funkiness now and then. However, while plugged in, I hit the power
button, instead of the home button to turn on the home screen. The phone
wouldn't open to any screen nor would turn on or off. So I ended up
yanking the battery to turn it off then reinstalled battery and turned phone back
on. I don't know if that had any effect on the charging issue, but I took
the icon off the homescreen and am using the power button only, for now.
I don't think both batteries are faulty at the same time at this point. I
don't know if the screen off app caused some wake issue that interferes with
charging the battery.
I do know that when plugging in the phone to charge there's a bit of clunkiness
initially as the phone locks for a second before allowing use for screen or app
and that's always been the case since the gb update. Also, the LED doesn't
always turn green from amber when fully charged with the screen off until
you reboot or use the phone in some way while still plugged in. So there is
some kind of wake issue in the stock ROM. But the latter has never stopped
the battery from charging.
I do know that Plume, the twitter app, started acting clunky with not updating
in the background unless I opened the app at least once after a reboot. But
I don't know if the latter is a wake issue.
Battery still seems normal. Heavy normal use, lots of SMS, tweets, Pulse reading,
Dolphin browsing, I'll kill 50% or more of the battery in 4+ hours. Otherwise, the
phone mostly in standby with periodic email and twitter reads, the battery lasts
all day or more than 24 hours. But the latter rarely happens anymore because I'm
a user.
The battery just went full charge with the stock charging cable just now.
This morning, I woke up with a dead phone, auto shutoff even though it was
plugged in which I did after solitaire and before going to sleep; as a charging
test.
I don't know if it's the phone or the Cellet retractable cord or both that's
stopping the battery from fully charging normally and consistently. I'll need
to get another data-charge combo chord and do more testing; and a new ROM.
Any ideas anybody?
try a new rom and also try using the stock charger and usb cable. Check inside your usb port on your phone for dust as well. Also go into recovery and wipe your battery stats. In the wipe menu for amonRa and under advanced (maybe here, i dont use cwm on my phone) in clockworkmod. also wipe your dalvik-cache just to clear any issues you may have, restart and give it a test. good luck
I just bought a phone with a broken charger port. Broke clean off the board, so my next step is to try to get liquid solder and stick it to the board. Did you take ur phone apart to see if the port is lose?
So I used the stock USB charging chord. Sure enough, it charged the phone.
Then I tried the portable charger at the coffee shop, worked. So the Cellet retractable
chord obviously had a short or something damaged/shorted for the charging part of
the cable after a year + of use and abuse.
What I don't understand, and haven't researched, is why there are charge only
chords; the stock USB HTC chord charges the phone, but the PC won't recognize
the phone's Micro SD card or the phone as an external drive. I presume the duo use
chords have a data path as well as a charging path. And yes, I know to switch the
phone from charge only to disk drive. The Cellet chord would provide the PC with
recognition for the phone's drive.
Considering the latter, what I'm not sure of, and haven't researched, is why when
the phone stopped charging, the chord eventually stopped charging, the phone
status still showed it as charging; the amber LED light on and the battery icon
in charging animation with white bolt showing? I presume that the charging path
still triggered the charging status, except once when I turned the screen back
on the battery icon was not animated and the white bolt not showing so I unplugged
the chord then plugged it back in where the battery icon animation continued.
Fortunately, or not, this forum returned 600+ results for 'battery not charging' and after
sifting through a few, the charging chord was mentioned which prevented a Sprint trip
and me contacting Seido; thankfully.
So I think manufacturers and ROM/kernel developers should visit this issue as a chord
that actually is not charging, or charging at an absurdly low rate, should trigger some alert
and not show a battery icon animation that appears to be charging normally.
Hey Guys,
Over the last year or so I've had intermittent charging issues with my Galaxy Nexus. About 4 months ago is when it first started happening, the phone would either not charge or only charge when it is turned off. Somehow the issue was resolved through tons of troubleshooting, I'm not even sure what fixed it or why it started working again.
Same thing happened about 2 weeks ago, except this time it won't charge at all. Then 2 days later all of a sudden started charging again. Now it's happening again today, I have no idea what is going on or why this handset won't charge properly. The phone won't turn on with just the charger in and the battery out either.
I've tried various chargers including the OEM charger, I've tried up to 6 different chargers and 7 seperate micro-USB B cords. Nothing. I've tried a brand new battery that a friend bought for his phone before he threw it in and no results.
At this point I think it's the USB charger board, however I'm not sure why it would not work and then work again. Does anyone have any ideas or any solutions? I've read thousands of threads on this, from this forum and many others and have gone through some ridiculous troubleshooting methods.
SCH-I515 Korean Version.
Seriously, anyhelp is appreciated.
As of now, all of a sudden it will charge while it's off. But only to about 4% then it just stops charging. It will not charge while it is on at all.
Because it's getting worse and worse?
Relock bootloader, and return it in for warranty, if you can. I'm afraid there's not much help if you already checked for damage to the USB port.
sent from my Google Galaxy Nexus
hi
had the same problem until a few minutes ago.
received my usb/charging flex part today and changed it just before to post here.
took me like 20 min, really easy to do, everything works perfectly and i also took time to clean up a bit the phone inside of some dirts and change the housing i bought with the flex part.
As my screen is under protection since the beginning (4 months old), and that i recently bought a 2000mah battery, well i have to say that i have a new phone ready to handle the new year easily!
operation is easy and you will find plenty of videos on youtube showing how to change the usb flex (7€/$ , +/-) so pretty cheap.
Good luck
Why not buy an external battery charger and a spare battery?
Sent from my Galaxy Nexus using xda app-developers app
I'd get a replacement daughterboard and switch it out yourself. It's easy dude, just like a previous poster already said. I just did it myself, took me all of 20 minutes and cost me $10. ifixit.com has a step by step direction sheet, if you have any questions feel free to contact me about it.
Try the following:
1.) Turn off your phone.
2.) Get a flat head screwdriver (small one)
3.) Push the flat connector inside the microusb port up. (It often gets bent downwards because it's so thin compared to other phones...)
4.) Boot into the bootloader
5.) Hit volume down until restart bootloader appears. Press power button.
6.) Start phone manually.
farshad525hou said:
Try the following:
1.) Turn off your phone.
2.) Get a flat head screwdriver (small one)
3.) Push the flat connector inside the microusb port up. (It often gets bent downwards because it's so thin compared to other phones...)
4.) Boot into the bootloader
5.) Hit volume down until restart bootloader appears. Press power button.
6.) Start phone manually.
Click to expand...
Click to collapse
i dont know why, but this fixed it for me, for a short while. now the charging is intermittent and seems to come and go as it pleases.
Hi,
I had the same problem of ghost charging, it started with phone not charging when connected to charger and then randomly showing charging...
Now discovered it causes vbus_tuna_otg wake lock, resulting in high system usage in settings> battery and not letting phone go to deep sleep, causing battery drain.
Sent from my Galaxy Nexus using Tapatalk 2
Same Problem
I've come into the same problem with my Galaxy Nexus as well. If my phone is turned on, my phone will recognize that a charger is plugged in but the battery will not charge at all. If the phone is off and plugged in, the charging screen won't appear. I've tried multiple chargers and cords, 2 different batteries, and even replaced the micro usb and board, but the problem hasn't changed at all. I've managed to charge my batteries with an external charger but would like to get my phone back to normal working condition. Does anyone think that changing the actual motherboard itself might solve the problem?
Sayword said:
I've come into the same problem with my Galaxy Nexus as well. If my phone is turned on, my phone will recognize that a charger is plugged in but the battery will not charge at all. If the phone is off and plugged in, the charging screen won't appear. I've tried multiple chargers and cords, 2 different batteries, and even replaced the micro usb and board, but the problem hasn't changed at all. I've managed to charge my batteries with an external charger but would like to get my phone back to normal working condition. Does anyone think that changing the actual motherboard itself might solve the problem?
Click to expand...
Click to collapse
I had this problem before, using something small and flat to push the charging connector off the housing will work for awhile. The pin in the charging port is bent down and is very thin it's easy to lift up just use a tiny bit of force to lift it up. The pin touching the housing is causing a short and that is causing your no charge while it's on and mine even went as far as draining my battery very quickly. I did research and found alot of people having this issue on the gnex. I eventually had to turn mine in for replacement, no problems since. Hopefully yours is still under warranty or you can buy the peice that is broken and replace yourself, there is a post above saying what to do for that.
Looks like my phone developed this problem. It sometimes won't charge be it via my pogo dock or USB cord. It seems to start taking a charge after I pop out the battery and then put it back in. I'm going to order another battery and see if that is the problem.
Thank yoiu!!
solved my problem!! I am in your debt
popping the battery out just worked for me too
hlaalu said:
Looks like my phone developed this problem. It sometimes won't charge be it via my pogo dock or USB cord. It seems to start taking a charge after I pop out the battery and then put it back in. I'm going to order another battery and see if that is the problem.
Click to expand...
Click to collapse
I just did the remove battery trick as well and it worked. I just noticed my battery not charging yesterday but figured it was because I was trying to use a different charging in my dad's car. got to work where i left my normal charger and no luck.
thefayeride said:
I just did the remove battery trick as well and it worked. I just noticed my battery not charging yesterday but figured it was because I was trying to use a different charging in my dad's car. got to work where i left my normal charger and no luck.
Click to expand...
Click to collapse
That's good, I tried it a few times but the issue still pops up. To be fair though, I've had this phone and battery since launch day... Almost three years old. I ordered a new battery so hopefully I won't have the issue anymore... And I won't be surprised if my battery life is a little better too.
Sent from my Nexus 10 using Tapatalk 2
hlaalu said:
That's good, I tried it a few times but the issue still pops up. To be fair though, I've had this phone and battery since launch day... Almost three years old. I ordered a new battery so hopefully I won't have the issue anymore... And I won't be surprised if my battery life is a little better too.
Sent from my Nexus 10 using Tapatalk 2
Click to expand...
Click to collapse
The Galaxy Nexus is nowhere near three years old. Your phone would be 18 months old if you had it since launch.
Sent from my Nexus 7 using Tapatalk HD
Excuse me, two years. According to Samsung their lithium batteries have a life of about 500 cycles. So my point is still valid, my battery is probably just on it's way out. I'll find out for sure when my new one comes tomorrow.
Sent from my Nexus 10 using Tapatalk 2
Yeah, since battery life hasn't exactly been the strong point of the GN and some of us had to go though a complete cycle daily, I suspect a lot of folks are going to be seeing more and more issues. Not too long ago, I had a battery that failed in such a way that it would randomly crash the phone and had to be pulled in order to allow a reboot. I would've suspected anything but the battery in that case.
Sent from my SCH-I545 using Tapatalk 2
farshad525hou said:
Try the following:
1.) Turn off your phone.
2.) Get a flat head screwdriver (small one)
3.) Push the flat connector inside the microusb port up. (It often gets bent downwards because it's so thin compared to other phones...)
4.) Boot into the bootloader
5.) Hit volume down until restart bootloader appears. Press power button.
6.) Start phone manually.
Click to expand...
Click to collapse
This kind of worked for me, but the "boot into bootloader and restart it" killed my phone, don't know why. After a lot of a hassle i got it on, with 2% left, again not charging...tried to repush the connector towards the center and now i cant get my charger into the phone, maybe overbend it...what to do?...
I have a strange problem, my Gnex does not charge the battery, first i thought that it was the battery so, I tested the battery on other phone and it charged just fine, and then i ordered the usb/charging assemble from ebay and replaced on my gnex, and still not charging the battery, but when i connect the phone to the pc it recognize it immediately, but still won't charge the battery, anybody has an idea of what my problem is?? and how can i solve it?
Please help!!!
is there anyone with problems charging the t320?
it goes fine until 40%, above that or stops charging or is really slow, like 1% in one hour.
i thought it was a rom issue, so i flashed the original rom from sammobile
the charging at this moment is 56%, 150mA average, when isn't negative - 200
this is stock usb and charger, and also with other charger/cable is the same
Me too
monteiro-ribas said:
is there anyone with problems charging the t320?
it goes fine until 40%, above that or stops charging or is really slow, like 1% in one hour.
i thought it was a rom issue, so i flashed the original rom from sammobile
the charging at this moment is 56%, 150mA average, when isn't negative - 200
this is stock usb and charger, and also with other charger/cable is the same
Click to expand...
Click to collapse
I was just searching the forums as bought mine yesterday and have a similar problem, mine got to 56% then stopped charging. If i turn off the tablet it does start to charge again so will fully charge with it powered down and see what happens.
soon i'll be testing another charger
you can see the charging voltage on the galaxy charging current available on playstore
most likely i will use warranty
monteiro-ribas said:
soon i'll be testing another charger
you can see the charging voltage on the galaxy charging current available on playstore
most likely i will use warranty
Click to expand...
Click to collapse
@tidy01
Pop the back off gently and disconnect the battery from the main board. When you reconnect it, let it charge up fully before turning it back on. After this, it will behave normally for the rest of time.
Thanks
dottat said:
@tidy01
Pop the back off gently and disconnect the battery from the main board. When you reconnect it, let it charge up fully before turning it back on. After this, it will behave normally for the rest of time.
Click to expand...
Click to collapse
Thanks for the reply but it seems my issue was caused by a faulty outlet socket. The socket works fine for everything else but would only charge the tablet when it was powered down. Tried charging off my laptop and desktop usb and it was the same, but tried some other outlet sockets and they charge fine. I understand the usb outlets might not provide enough to charge the tablet but hadn't considered the socket as I know it works, must be just enough high resistance to prevent it charging a working tablet but provides enough current to charge it when it's powered down. The fact it was showing a 56% charge was just co-incidence.
Thought it might be worth posting this as it's not something I've come across before.
tidy01 said:
Thanks for the reply but it seems my issue was caused by a faulty outlet socket. The socket works fine for everything else but would only charge the tablet when it was powered down. Tried charging off my laptop and desktop usb and it was the same, but tried some other outlet sockets and they charge fine. I understand the usb outlets might not provide enough to charge the tablet but hadn't considered the socket as I know it works, must be just enough high resistance to prevent it charging a working tablet but provides enough current to charge it when it's powered down. The fact it was showing a 56% charge was just co-incidence.
Thought it might be worth posting this as it's not something I've come across before.
Click to expand...
Click to collapse
Here's the thing. When mine was misbehaving I could get it to start charging again by switching outlets or even reversing polarity on the wall plug. It was a temporary fix as within days the problem would be back. I thought I had it fixed so many times. It always came back. If it happens to you again just remember the above post. It's been four months since I did it and never once has it been quirky. Something in the hardware needed reset that only disconnecting the battery could do.
dottat said:
Here's the thing. When mine was misbehaving I could get it to start charging again by switching outlets or even reversing polarity on the wall plug. It was a temporary fix as within days the problem would be back. I thought I had it fixed so many times. It always came back. If it happens to you again just remember the above post. It's been four months since I did it and never once has it been quirky. Something in the hardware needed reset that only disconnecting the battery could do.
Click to expand...
Click to collapse
Thanks once again, I will keep this in mind if does happen again.
dottat said:
@tidy01
Pop the back off gently and disconnect the battery from the main board. When you reconnect it, let it charge up fully before turning it back on. After this, it will behave normally for the rest of time.
Click to expand...
Click to collapse
Hi, I have this problem also, as well as random reboots. I just want to ask you on how to take the back off of the Tab Pro 8.4?
Cheers
Zakanam said:
Hi, I have this problem also, as well as random reboots. I just want to ask you on how to take the back off of the Tab Pro 8.4?
Cheers
Click to expand...
Click to collapse
Very gently use something like a guitar pick or a credit card to pry it up around the edges
dottat said:
Very gently use something like a guitar pick or a credit card to pry it up around the edges
Click to expand...
Click to collapse
Thanks for your reply. Would you pry the back faux leather cover from the back, or from the front via the glass screen (like in note 10.1 2014)?
I wouldn't want to break my tab he he thanks
Zakanam said:
Thanks for your reply. Would you pry the back faux leather cover from the back, or from the front via the glass screen (like in note 10.1 2014)?
I wouldn't want to break my tab he he thanks
Click to expand...
Click to collapse
It's the faux leather thing you pry off. Keep the angle that you pull on the cover shallow and work it slowly.
dottat said:
It's the faux leather thing you pry off. Keep the angle that you pull on the cover shallow and work it slowly.
Click to expand...
Click to collapse
with no other solution i did too pop the back off gently and disconnect the battery from the main board, now it's working OK, let's see how long
cabel pull
hoping this works. I just filled out a warranty email today for same issue on 12.2 Tab Pro. It pried the case open with a credit card. Very slow, took about 7 minutes. Pulling the power cable in the middle, probably behind green tape. Use needle nose pliers or something small behind the wires and pull up. The pins are tiny and will f*ck the whole thing up if bent.
I get the feeling that the screen turns itself on even when eye tracking settings are off or closed in case. I hear the annoying sound at night when charging. Why Sammy does not have a smart current sensor built in is insane. Asking you to unplug when most people will leave on and charge overnight. Just dumb.
I can't get past 57% charging for last 2 weeks. Stock, unrooted for first time in a long time, so I am pissed to hear ROM had not effect. This is likely undocumented hardware issue Sammy doesn't want to admit to.
even on my T325 I had the same problem but I solved it this way ...
I have worn the battery completely until turn off my device, I loaded the battery overnight to device OFF.
wipe and install rom custom samsung
I launched and used app "battery calibraton" (root)
I have now done 4 cycles of charging to 1600/1750 mA
house66 said:
even on my T325 I had the same problem but I solved it this way ...
I have worn the battery completely until turn off my device, I loaded the battery overnight to device OFF.
wipe and install rom custom samsung
I launched and used app "battery calibraton" (root)
I have now done 4 cycles of charging to 1600/1750 mA
Click to expand...
Click to collapse
The battery "unplug" works....
monteiro-ribas said:
with no other solution i did too pop the back off gently and disconnect the battery from the main board, now it's working OK, let's see how long
Click to expand...
Click to collapse
Still good?
mgp53 said:
The battery "unplug" works....
Click to expand...
Click to collapse
There is no need for physical interventions on the hardware, maybe someone does not know in depth the behavior of lithium ions
house66 said:
There is no need for physical interventions on the hardware, maybe someone does not know in depth the behavior of lithium ions
Click to expand...
Click to collapse
Perhaps not, but I and MANY others have encountered the same problem. Across multiple Roms, fully discharging and recharging, running the so called calibration apps. Rebooting, unpluggin, replugging. The problem NEVER fully went away. It would work for a charge cycle or two or three, then would reappear.
I finally took the back off, unplugged and replugged the connector., closed up the case, charged it for several hours before turning it back on.
Not ONCE has the problem occurred since that intervention. That was over a month ago.
Maybe it's not lithium ion behavior, it might be in the charging circuit and hardware.
If you have a suggestion, then by all means share it so others can solve their problem.
mgp53 said:
Perhaps not, but I and MANY others have encountered the same problem. Across multiple Roms, fully discharging and recharging, running the so called calibration apps. Rebooting, unpluggin, replugging. The problem NEVER fully went away. It would work for a charge cycle or two or three, then would reappear.
I finally took the back off, unplugged and replugged the connector., closed up the case, charged it for several hours before turning it back on.
Not ONCE has the problem occurred since that intervention. That was over a month ago.
Maybe it's not lithium ion behavior, it might be in the charging circuit and hardware.
If you have a suggestion, then by all means share it so others can solve their problem.
Click to expand...
Click to collapse
I've already written how I solved the problem, but in 5 years and dozens of Android rom installed on various devices, this problem for me was very frequent.
Always the same. On my ST325 I solved like other times in the past.
No news I found on this battery, battery charger of the same problems since I know Android
*mgp53
sorry for my bad English ...
for this device I've tried all the roms available (CM11 or not)
the problem is very acute especially after CM11> Pro Plus V2, but the problems had already occurred some time with the various installations buil CM11
about a week I did the operation described above (already done in the past even on my previous samsung device, Note 1, Galaxy s4, Galaxy Mega, Galaxy tab 3 g3 ) with the same result ...
The battery charges very quickly with the device ON to 1700 mA (monitored with "Monitor battery widgwt pro")
again sorry for my english
Hello XDA members. I have a very troublesome issue with my galaxy tab 3 7.0 inch tablet. It will NOT turn on at all, no battery charging, no device power on, no comp recognition, nothing. I have already tried:
Letting it charge overnight (factory charger along with others) with several known working cables
Unplug battery for 5 minutes
Press and hold power, Vol Down, and home for 10 sec, 30 sec, and 1 minute
Press and hold power and vol down for 10,30,60 seconds.
I sent it in for repair and they wouldnt fix it because it's rooted. When I got it back it briefly turned on to the battery charging, but nothing since. I'm thinking there must have been some way they got it on.... All proper drivers are installed on PC and it's never been dropped, water damaged, etc.
Would anyone be able to provide insight as to why and provide a fix?
My 8 inch tab 3 wasn't coming on either a few days back, I got it back on by holding home and the power button for a while. I was about to give upwhen the battery charging image came on. I think I did the same again and it came on normally.
a97antonio said:
My 8 inch tab 3 wasn't coming on either a few days back, I got it back on by holding home and the power button for a while. I was about to give upwhen the battery charging image came on. I think I did the same again and it came on normally.
Click to expand...
Click to collapse
Was that from computer or wall?
From wall, it was about 3/4 charged by then
a97antonio said:
My 8 inch tab 3 wasn't coming on either a few days back, I got it back on by holding home and the power button for a while. I was about to give upwhen the battery charging image came on. I think I did the same again and it came on normally.
Click to expand...
Click to collapse
a97antonio said:
From wall, it was about 3/4 charged by then
Click to expand...
Click to collapse
Still no luck... I can feel the tablet getting hot down at the charge port so I know it's charging, and i know the lcd isn't damaged.
Mine is in the same condition. Anyone know how or why this happens and how to fix it?
Sent from my LG-LS980 using Tapatalk
Not sure if this will help, but just like with phones, sometimes android tablets just need a battery pull. My kids xo tablet went dead and before I tossed it in the trash I took the housing off and had to clip the + wire since it was soldered to the board. Twisted it back together to check and sure enough the tablet powered on like normal. Ive had to pull the battery on an Sm-t217a and it was a lot easier. They have a removable clip that attaches to the board.
Sent from my SAMSUNG-SM-T217A using XDA Premium 4 mobile app
I think it might be the battery itself. Just for giggles I left it plugged in for days and i just checked back on it and the Battery charging screen kept flashing on and off. Won't hold any charge. Probably will just order a new battery and see what happens. I pulled the battery a couple times and nothing happened. Closer inspection found that the tech that looked at it damaged the battery cord (unless it came with the copper on the wiring already exposed...)
xkn0s said:
I think it might be the battery itself. Just for giggles I left it plugged in for days and i just checked back on it and the Battery charging screen kept flashing on and off. Won't hold any charge. Probably will just order a new battery and see what happens. I pulled the battery a couple times and nothing happened. Closer inspection found that the tech that looked at it damaged the battery cord (unless it came with the copper on the wiring already exposed...)
Click to expand...
Click to collapse
You might be right about the battery being dead, although they usually don't just go all at once like that. The charge indicator flashing is odd. The only thing close I've seen is an "x" over the icon when there aren't enough amps (my tab needs 2 amps. 1 amp chargers and some pc usb ports give me the x.
If you have an old cable you can cut, you could try to charge the battery itself to see if it takes a charge (or at least use a multimeter on it to check for voltage). Then you could narrow it down a bit to whether it is the battery or possibly the charge port/hardware..... I saw a bit of exposed wire just before the clip of mine too, made me extra careful pulling the clip up.
rmntruexjr said:
You might be right about the battery being dead, although they usually don't just go all at once like that. The charge indicator flashing is odd. The only thing close I've seen is an "x" over the icon when there aren't enough amps (my tab needs 2 amps. 1 amp chargers and some pc usb ports give me the x.
If you have an old cable you can cut, you could try to charge the battery itself to see if it takes a charge (or at least use a multimeter on it to check for voltage). Then you could narrow it down a bit to whether it is the battery or possibly the charge port/hardware..... I saw a bit of exposed wire just before the clip of mine too, made me extra careful pulling the clip up.
Click to expand...
Click to collapse
I wouldn't even know where to start with the wiring. Multimeter isn't something I have access to, and it seems a little complicated for me to spend time on.
When I say it's flashing, I mean the device powers on to the battery charging screen, then dies, wash rinse repeat. If I go into recovery, same thing. It all happens within a couple seconds, so it's hard to describe.
My dad has one that I can pull the battery from, I might do that. Batteries are like 20 bucks on amazon, so I think I'll test with my Dads and if it works just order a battery and report back here.
similar problem here
rmntruexjr said:
You might be right about the battery being dead, although they usually don't just go all at once like that. The charge indicator flashing is odd. The only thing close I've seen is an "x" over the icon when there aren't enough amps (my tab needs 2 amps. 1 amp chargers and some pc usb ports give me the x.
If you have an old cable you can cut, you could try to charge the battery itself to see if it takes a charge (or at least use a multimeter on it to check for voltage). Then you could narrow it down a bit to whether it is the battery or possibly the charge port/hardware..... I saw a bit of exposed wire just before the clip of mine too, made me extra careful pulling the clip up.
Click to expand...
Click to collapse
My daughters tab 3 7 inch T210 also refuses to start. First time it was fixed by opening the device and disconnecting the battery. Now that doesn't help anymore. If I attach the original charger and measure the voltage when the device has rested for some months I can see that the voltage slowly rises so it seems to do the charging even if there is no sign of charging on the screen. After some hours of charging I measure 3,78V on the battery, after disconnecting the battery.
If I attach the battery and turn on the device I measure 3,76V before I push the start button and 3,74V directly after pushing the button. After about 15s the voltage goes back to 3,76V. Nothing happens on the screen... Tried with different combinations of pushing on-button and volume up, volume down, menu....
So -the best thing would of course be a quick visit to local shop to buy a new device of another brand but for some reason I refuse to give up.
Any advice would be appreciated.
(I Have made no significant modifications but the 4-year old daughter may have contributed in an unknown way )
magnusn68 said:
My daughters tab 3 7 inch T210 also refuses to start.
So -the best thing would of course be a quick visit to local shop to buy a new device of another brand but for some reason I refuse to give up.
Any advice would be appreciated.
(I Have made no significant modifications but the 4-year old daughter may have contributed in an unknown way )
Click to expand...
Click to collapse
The better way to test if your tablet can turn on: buy a new battery, under $15 on Ebay since your old battery is dead or completely drained.
Use the new battery to turn on your tablet. If it's on, check the build number of your device after go to About My Device: if it's not end with OB1, the latest firmware which fix charging issue.
It's more likely your build number is MK1 to NI1, the build numbers count by alphabet order. Upgrade the software via Wifi, battery must be at least 25%, otherwise your tablet won't allow you to upgrade. Bring the firmware to the current OB1, your tablet should take charge normally, otherwise the USB charging port is defective or damaged. This micro USB is cheap, around $2, but it need to solder to motherboard to replace the defective one.
A while back, after sweating profusely into my phone during a workout session, my gnex started behaving badly when I wanted to charge it. Needless to say I've got a battery app installed that is able to detect the plugin state (whether the phone is on battery, whether the charger is plugged in or whether it's just a usb connection such as a computer) and actual % voltage the thing has in the status bar. The app itself is: Battery by MacroPinch.
Well I figured the usb port was probably going so I got a new one of those (i.e. flex cable microusb etc.) for my sch-i515. I also decided to get a new battery just in case... so I replaced the battery (it's an oem samsung one) and fwiw, the thing stabilized its behavior! I've since swapped them back and forth with no apparent issues. However, I took my phone out with me on a run and it started acting flakey again. I've (in the past) had to clean out the port with a toothpick, I've had to on occasion bend the flap in there, do battery pulls (which believe it or not worked for a while), and so on. This time however was different. The phone wouldn't wake when I plugged in or unplugged the charger... and in no way shape or form would the charge indicator come on (you know, lightning bolt in the batter icon etc.) and to make matters even worse this time, my laptop simply didn't recognize the phone was plugged in. So I bit the bullet and and did the surgery and replaced the usb board and mic.
It could not have gone more smoothly, unfortunately (as might have guessed) all is not well... so now:
if the screen is dark -
the phone will wake when the charger is plugged in
the phone will wake when the charger gets unplugged
Using a moto droid cable (from my og droid)
the phone/computer realize they are plugged in together and Wug's NRT works and so on.
BUT the battery STILL won't charge.
I guess the phone is a couple of years old and it doesn't really owe me anything (I guess) but I'd really like this thing working better until I can get a new one. Does anybody out there have any ideas on what I might have missed? The phone works as before, exactly fine except it won't chare so I'm pretty sure I managed to get all the connectors back together properly... I suppose the usb port I replaced the original with might be defective but....
Any help is greatly appreciated...
Oh I'm rooted but stock, android 4.2.2
No advice at all??
I WOULD have said bad usb port, MAYBE try another? They are cheap enough, mine has been broken forever and I do not want to take device apart to change it because crack in my screen I'm worried will get worse if I take device apart.
so since its impossible for me to charge battery in device, I'm NOT worried about THAT tho, BECAUSE a LONG while back I had purchased 2 extra OEM batteries, PLUS a OEM samsung EXTERNAL CHARGER/stand which ALSO came with a battery. so I NOW have 4 total batteries, and I charge them up in the external charger, then just swap them out as needed.
which honestly is GREAT, cuz if I'm going out all day, I can just bring my extra fully charged batteries with me, and not have to worry about battery drain from heavy use cuz I have 3 other fully charged ones WITH me.
that's really all I can say, if you would like help finding the exact external charger that comes with a battery as well let me know, I had bought mine on amazon couple YEARS ago for only like 25-30$ BRAND NEW, I'm guessing TODAY that price would be like ten bucks
Thanks... that may be the way to go but I use this thing for my gps... but the thing doesnt get power when plugged in at all it seems (I plug it in, pull the battery and it does not stay on) so far I've been using my wife's gnex to charge my main and spare... but like I said the thing is, the phone doesn't even stay on when plugged in and I pull the battery (hers does so I'm thinking that there may be something deeper in that's failed here). I cracked the thing back open last weekend to make sure all the connectors were engaged, but I did not find any issues with them past that point.
Does anyone know if there is a hidden connecter somewhere in there that i could possibly have accidentally unhooked that prevents input power from reaching the guts of this thing?
OK it's getting crazier all the time...
Since my gnex was "working" except for charging (also, the phone would not stay powered on with the usb plugged in and the battery removed) I decided to go for a long run yesterday... I take the phone with me for music, tracking and general "safety". About half-way through my run, I look at the window in the neoprene armband I'm using and it looks like a sauna... the bluetooth cuts out on me... so I pull the phone out and with a minimum of fiddling I get the music back on... regarding the charging issue ... I was using my wife's gnex to charge my two oem batteries.
Well after this run, I try and use voice to text in a text message after I got home... well guess what... the phone records NOTHING. It's like I'm not talking. So I try a few phone calls... the display shows the call in progress, but I hear nothing! So I use my land-line to call the phone... NOTHING NOTHING NOTHING.
I had previously replaced the usb port, so I took out the tools and disassembled the phone. there was some moisture in there... anyway I dry it out as best I can and reassemble. Now I plug in the headphones, and guess what... I make calls... i.e. the damn phone works as a phone. I pull the jack out and nothing. I turn on speaker mode ... I can hear the phone ringing when I place a call... turn off speaker nothing. Bluetooth works with the phone fine, and the volume control for multimedia makes no sound when I toggle it...
Fast forward to today. I disassemble it again thinking I might have not reconnected one of the straps... I disconnect the volume rocker connector and the usb port connecter plus I remove and re install the antenna housing.
NOW the phone CHARGES but no lightning bolt indicator in the battery... but the battery level is CLEARLY increasing! Also when I plug into a laptop, the usb debugging symbol comes on (since I have it enabled) but when I unplug it does NOT go away... I unplug, disable usb debugging it goes away... reenable usb debugging and the symbol comes back without the phone plugged in until reboot.... but now the phone WORKS again as a phone!
so now the phone:
charges but without any visual indication (other than the % reporting of the battery widget I use)
phone recognized by my laptop (which wasnt' working either until I reset some of the connectors today), but unplugging doesn't make usb debugging indicator in status bar go away.
Phone speaker and mic now working without having to use bluetooth, plug-in headphones or speaker phone. (mic was not working with speakerphone turned)
This is just too messed up. My sweat does carry a lot of salt.... and Im wondering if I managed to shake something loose... I did also pry the usb tab up a bit as well...
Is there some way... some fluid I can dunk the phone into, which might clean the thing without destroying it?
My galaxy nexus after some drops not charging.
It can only work only when i have connected with my laptop, charger.
I think usb port is ok.
I must buy a charging port to make that work?