Mac Address - Sony Xperia ZL

Hey, since 20th march build, or something close, Cyanogenmod changes something about the mac address, and I can't modify it anymore. Formerly, I just swift the wlan_macaddr0 and wlan_macaddr1, renaming those, and my address was changed. I could reboot and still unchanged, no problem. But now I can't even do that. I tried to turn off Wi-fi, change it, and turn it on, but doens't work. I ask on Google+ cyanogenmod community, however didn't solve the problem. Can someone teach me how to change it now? Thanks a lot!

ifconfig with root and terminal... your mac for wlan right?? why would you have two and, that whole renaming them part!? makes no sense to me...
I tried google and came up with this:
https://play.google.com/store/apps/details?id=com.wireless.macchanger&hl=en
http://android.stackexchange.com/qu...the-permanent-mac-address-on-my-android-phone

ham5 said:
ifconfig with root and terminal... your mac for wlan right?? why would you have two and, that whole renaming them part!? makes no sense to me...
I tried google and came up with this:
https://play.google.com/store/apps/details?id=com.wireless.macchanger&hl=en
http://android.stackexchange.com/qu...the-permanent-mac-address-on-my-android-phone
Click to expand...
Click to collapse
I will send you a screenshot.
In my phone (Maybe in all Xperias), there's a folder where the Mac Adress are listed. There's more than one, as you can see. I just swaped the first and the second. To explain more detailed
wlan_macaddr0: XX:XX:XX:XX:XX:01
wlan_macaddr1: XX:XX:XX:XX:XX:02
wlan_macaddr2: XX:XX:XX:XX:XX:03
wlan_macaddr3: XX:XX:XX:XX:XX:04
Okay. Then I changed the ''wlan_macaddr0'' and ''wlan_macaddr1'' content. So:
wlan_macaddr0: XX:XX:XX:XX:XX:02
wlan_macaddr1: XX:XX:XX:XX:XX:01
wlan_macaddr2: XX:XX:XX:XX:XX:03
wlan_macaddr3: XX:XX:XX:XX:XX:04
In cm11, that works normally. In cm12, it worked to, until builds after 20 march. I tried other roms, and if they were build before that date, it worked too. In stock lollipop, it works, but changes the mac address to a different thing. Anyway, the stock thing doens't matter, because I'm not using it anymore.
So, what I'm asking is: ''how can I change the mac address, even if other methods are necessary, in cm12 lastest builds?''
I tried apks and didn't work. Tried changing by terminal emulator and didn't work either. Tried messing up some system files and got broken wi-fi.
If you know how my phone can process the ''wlan_macaddr1'' instead of ''wlan_macaddr0'', I would appreciate it. Thanks (sorry my bad english)

Related

[Q] Mac Spoofing help needed

So my college uses mac address validation for its wifi. I would try to get my phone registered, but they do not allow phones/game consoles. I want to spoof my laptops mac address to get internet on my phone.
So far I have temp rooted my phone and installed the Android SDK onto my computer, what should I do next? I looked up guides on the internet but could not get them to work. Because I am a new user I cannot post links but here is some text from the site you can google:
This is a HOW TO about how to spoof your MAC address. A MAC address is a combination of numbers and letters that are unique to your own wifi card. I am not responsible for how you use this, I am just putting it out here. Don't flood this thread with how it is illegal because there are legal uses for this (such as pen testing).
Click to expand...
Click to collapse
It would change the mac address temporarily but it would go back to its original right after I try to connect to wifi.
Thanks (p.s. please use noob language, I just got into the whole android thing about a week ago).
Here's a post from the Hero forum that may help: http://forum.xda-developers.com/showthread.php?t=686789
WARNING: do not flash anything from that thread
So would I still need to unlock the SPL (using the G2/desireZ files)? Or would I be able to skip that part?
Sounds like you would need the DZ/G2 ENG HBOOT...
I have never got this to work, anyone else have an idea on how to do this?

[Q] spoof/change MAC (final thread)

Since I first bought my Desire, the first thing I wanted to do is to change it's MAC to whatever MAC I wanted. I wasn't able to do it then, and after a year and a half I am still not able to do it.
Most of the threads here in XDA don't give an answer to this question, and the ones that do give an answer, seem to be intended for other devices than HTC Desire.
I have found this thread at androidforums (I am still not allowed to post a link, but I would like everyone to be able to see this information: http androidforums com /t-mobile-g1/3506-changing-spoofing-mac-address.html) to have the most information, but none of this methods worked for me; namely:
Code:
su
ip link set eth0 address 00:12:f0:dd:cc:dc
or
Code:
su
busybox ifconfig eth0 hw ether 00:12:f0:dd:cc:dc
Once again, none of the above methods worked for me. The commands are accepted, but when I check the MAC with "ip link show eth0", the MAC is still the same...
So, to the experts out there, PLEASE: what is the correct way to change the MAC address of our HTC Desires' MAC?
Thank you all in advance.
I forgot to mention one more appearance in the MAC spoofing scene.
I recently found this application in the market: (once again, linking restrictions apply for me...)
https market.android com/details?id=com.GadgetWorkshop.MACSpooferForHD2
I haven't tried this app because it is not meant for my phone and as I don't fully understand how does this work, I don't want to risk misconfiguring my phone.

Manually Change Wlan0 Mac Address Stock ICS

Hi everyone. I need to change my Mac Address on a stock rooted ICS SGS3 Sprint.
None of the apps work in changing the mac address on this device I tried them all.
To my understanding there is a .conf file somewhere in the /system/ dir.
Any help on witch directory this is located and the file name to edit?
Thanks!
Strange that I read this from you. I read your post in the "things to do with your GS3". Didnt you have a mac address spoofer in there? BTW I liked everything you made us aware of especially wifikill thanks.
evoer said:
Strange that I read this from you. I read your post in the "things to do with your GS3". Didnt you have a mac address spoofer in there? BTW I liked everything you made us aware of especially wifikill thanks.
Click to expand...
Click to collapse
Yea I had not used that app on this device yet. It used to work on my Evo. I think I may have figured this out.
This method has worked fine for me:
http://forum.xda-developers.com/showthread.php?t=1385577
Make sure you are not connected to anything before hand
Tekara said:
This method has worked fine for me:
http://forum.xda-developers.com/showthread.php?t=1385577
Make sure you are not connected to anything before hand
Click to expand...
Click to collapse
The command works fine and I did it while not connected to my network. However when I go to connect I get authentication failure. The mac also does not change. I wonder why. I will keep digging.
busybox ifconfig wlan0 hw ether 00:11:22:33:44:55
Thanks!

modifying mac address (Viper Rom 3.20) (android 6.0.1)

Ok so essentially im trying to spoof my mac address on my newly purchased verizon HTC 10 its a great phone but of course i got caught up in how pretty the phone was and purchased it without realizing that Verizon prevents you from unlocking the bootloader ( cant say i'm surprised it is verizon after all ) no big deal so i purchased sunshine to get s-off which worked very well, flashed twrp recovery and easily installed viper rom, after installing all my apps, i thought that surely spoofing my mac would be no problem, after all i spoofed the mac on my jailbroken iphone with a simple terminal command that modifed the mac in NVRAM. Then the great train wreak began, first i started with the play store apps which would spoof the mac however they failed to authenticate with any network that had any kind of security so that was a no-go, then i used busy-box commands to try and attempt to spoof the mac same issue failed to authenticate, so then i just figured id go into the filesystem and modify some files, however every tutorial i could find pointed to a /efs directory which was not present at all or a /persist directory which was also not present there were a few other directories none of which i could find. Eventually i just got so pissed i took the wifi firmware files ( and if anyone was wondering the model of the chip is a bcm 4359 which is apparently a really good chip ) and went into a hex editor and found macaddr=%2 and changed %2 to equal the mac im trying to spoof. Of course when i applied the modified firmware files the wifi failed to turn on at all, so i thought maybe its the viper rom, perhaps it lacks directorys that a stock 6.0.1 rom does, but after restoring my backup its the exact same root directory as viper, what i don't understand is why its so easy too spoof a mac address on an IOS DEVICE, but on an open source operating system such as android its giving me this much trouble, maybe i'm just stupid and missing something really obvious but surly it cant be this difficult to spoof a mac on android, any help would be greatly appreciated.

Uconnect 8.4 ver 17.11.07 trying to "root"

I was posting some questions in the "Rooted Jeep Cherokee '14 Uconnect" thread but I've started this new thread for the 17.xx versions because the methods (if we are able to identify them) aren't the same as the 16.33.29 and earlier firmwares...
I am still trying to crack into that unit with the 17.11.07 software. I have a D-Link USB Ethernet but its a HW revision D and I believe I would need a B if we can get ethernet enabled at all.
Also, if we can get Ethernet enabled we will still need to get SSH password or key.
devmihkel said:
For good or for bad NOT everything appears correct, except the running 17.x version... As of now neither the "commercial jailbreak" supports new versions (well yes they were using exactly the same file to start with Also 16.51.x or newer appears to be no go: uconnect-8-4-8-4an-update
EDIT: haven't got 17.09.07 to try, but on 17.11.07 manifest.lua has changed and the last block/ search keyword is "ota_update" instead. Otherwise all the same, image valid after the edit and script.sh gets fired - at least on 16.33.29 that is @HanJ67 Did you actually try to mount installer.iso after the edit and checked /etc/manifest.lua for the end result before?
Click to expand...
Click to collapse
devmihkel said:
Yeah, 2nd attempt is much better as last lua block is correctly terminated and your script might actually run, but unfortunately no successful 17.x runs have been reported so far SWF scripts are not involved in update/jail-breaking run, these ones become relevant only once you are in (and need to enable some app or wifi or navi features etc). Afaik 17.x blocks ethernet dongle usage as well, but let's see if even the USB driver/link gets activated at all?
Click to expand...
Click to collapse
Do you have a 16.33.29 version I can try this on? I'm wondering if it will get me far enough to execute the "manifest.lua HD_Update" hack you and @HanJ67 were discussing.
I've used the 17.43.01, then finally found a 17.11.07 and had no luck there either.
In my latest attempts on the 17.11.07, I was able to hex edit the "ifs-cmc.bin" on the UPD and replaced the SSH-RSA key with my own. I think this bin will be flashed to the MMC during an update.
That SWDL.UPD got past the initial check and rebooted into update mode, but then it fails the second ISO check and loops. I had to use an unmodified image to finish the update and get back up and running.
I keep reading about making changes only after the 2048 Byte mark in the older versions with the "S" at 0x80. Is this still relevant
in later ISO/UPD images and to the second ISO check?
Right now, I'm looking to find a way to disable that check so that my modified .bin will be written to disk? I think this route would work to also modifying and getting WiFi enabled after a flash of the edited image.
If I had I 16.33.29 or similar older UPD version to attempt the HD_UPDATE hack in the Manifest.lua file I would give that a shot to be thorough.
Do You have an idea how to connect by USB2LAN adapter to uConnect ?
Do You know if there is an UART pins on the mainboard ?
itsJRod said:
I was posting some questions in the "Rooted Jeep Cherokee '14 Uconnect" thread but I've started this new thread for the 17.xx versions because the methods (if we are able to identify them) aren't the same as the 16.33.29 and earlier firmwares...
I am still trying to crack into that unit with the 17.11.07 software. I have a D-Link USB Ethernet but its a HW revision D and I believe I would need a B if we can get ethernet enabled at all.
Also, if we can get Ethernet enabled we will still need to get SSH password or key.
Do you have a 16.33.29 version I can try this on? I'm wondering if it will get me far enough to execute the "manifest.lua HD_Update" hack you and @HanJ67 were discussing.
I've used the 17.43.01, then finally found a 17.11.07 and had no luck there either.
In my latest attempts on the 17.11.07, I was able to hex edit the "ifs-cmc.bin" on the UPD and replaced the SSH-RSA key with my own. I think this bin will be flashed to the MMC during an update.
That SWDL.UPD got past the initial check and rebooted into update mode, but then it fails the second ISO check and loops. I had to use an unmodified image to finish the update and get back up and running.
I keep reading about making changes only after the 2048 Byte mark in the older versions with the "S" at 0x80. Is this still relevant
in later ISO/UPD images and to the second ISO check?
Right now, I'm looking to find a way to disable that check so that my modified .bin will be written to disk? I think this route would work to also modifying and getting WiFi enabled after a flash of the edited image.
If I had I 16.33.29 or similar older UPD version to attempt the HD_UPDATE hack in the Manifest.lua file I would give that a shot to be thorough.
Click to expand...
Click to collapse
Hello, any news about it?
hi,
can you explain how to change SSH key in "ifs-cmc.bin" file?
thanks a lot
itsJRod said:
I was posting some questions in the "Rooted Jeep Cherokee '14 Uconnect" thread but I've started this new thread for the 17.xx versions because the methods (if we are able to identify them) aren't the same as the 16.33.29 and earlier firmwares...
I am still trying to crack into that unit with the 17.11.07 software. I have a D-Link USB Ethernet but its a HW revision D and I believe I would need a B if we can get ethernet enabled at all.
Also, if we can get Ethernet enabled we will still need to get SSH password or key.
Do you have a 16.33.29 version I can try this on? I'm wondering if it will get me far enough to execute the "manifest.lua HD_Update" hack you and @HanJ67 were discussing.
I've used the 17.43.01, then finally found a 17.11.07 and had no luck there either.
In my latest attempts on the 17.11.07, I was able to hex edit the "ifs-cmc.bin" on the UPD and replaced the SSH-RSA key with my own. I think this bin will be flashed to the MMC during an update.
That SWDL.UPD got past the initial check and rebooted into update mode, but then it fails the second ISO check and loops. I had to use an unmodified image to finish the update and get back up and running.
I keep reading about making changes only after the 2048 Byte mark in the older versions with the "S" at 0x80. Is this still relevant
in later ISO/UPD images and to the second ISO check?
Right now, I'm looking to find a way to disable that check so that my modified .bin will be written to disk? I think this route would work to also modifying and getting WiFi enabled after a flash of the edited image.
If I had I 16.33.29 or similar older UPD version to attempt the HD_UPDATE hack in the Manifest.lua file I would give that a shot to be thorough.
Click to expand...
Click to collapse
sofro1988 said:
Hello, any news about it?
Click to expand...
Click to collapse
I have not had had much time to work on this.
I actually had an idea last week that brought me back to this. I plan to use a custom flash drive to present an unmodified ISO for verification, then swap nand to an identical image that has been he's edited to enable usb Ethernet and add a custom key for ssh access.
I thought to stack a NAND on top of the original on a is flash drive, then breakout the Chip Enable pin to a switch. I've seen this done for with guys modifying game consoles to be able to run modified firmware.
Once the 2nd NAND is in place I will restore an image of the original nand containing the unmodified update, then hex edit the required portions to allow access after updating.
If this method works, I should be able to pass the verification with the original nand chip, then switch it (hopefully there's a big enough window to do this by hand) then present the modified nand before it begins the flash procedure.
Hopefully someone more intimately familiar with the update scripts can verify I'm not missing anything in the process
Tajadela said:
hi,
can you explain how to change SSH key in "ifs-cmc.bin" file?
thanks a lot
Click to expand...
Click to collapse
I used a hex editor to find the Ssh RSA key and replace it. This passed the initial check to reboot into update mode, but wouldn't pass the full check in update mode. I'm hoping my attempt below will pass that check and still update with the modifications.
itsJRod said:
I used a hex editor to find the Ssh RSA key and replace it. This passed the initial check to reboot into update mode, but wouldn't pass the full check in update mode. I'm hoping my attempt below will pass that check and still update with the modifications.
Click to expand...
Click to collapse
thanks for answer.
I saw an ssh key with the hex editor, but I would like to see exactly what you have replaced.
if it's not too much trouble, it would be interesting to see with some screenshots the changes you've made.
So we could work on two fronts. The idea of the double nand is good, but not very simple to make ...
Just thinking out loud here, when you say it passes the initial check, does it then give you any confirmation of that or any message on the screen before rebooting to upgrade mode?
Sent from my CLT-L09 using Tapatalk
SquithyX said:
Just thinking out loud here, when you say it passes the initial check, does it then give you any confirmation of that or any message on the screen before rebooting to upgrade mode?
Sent from my CLT-L09 using Tapatalk
Click to expand...
Click to collapse
I tried much the same thing -- the swdl.upd is another CDROM filesystem:
martinb$ file swdl.upd
swdl.upd: ISO 9660 CD-ROM filesystem data 'CDROM'
It contains three more .iso files : installer.iso, primary.iso, and secondary.iso
installer.iso is a CDROM image, but is not mountable on my linux system
primary.iso is a CDROM image, and has the usual /bin, /etc/, and /usr filesystem for an install
the /bin directory has one file - update_nand
the /etc directory has the usual mfgVersiontxt, nand_partion.txt, system_etfs_postinstall.txt, system_mmc_postinstall.txt and version.txt
the /usr/share directory is all the firmware for various components - EQ, HD_FIRMWARE, IFS, MMC_IFS_EXTENSION,OTA,SIERRA_WIRELESS,V850, and XM_FIRMWARE
What's interesting to me is that they did update the SIERRA_WIRELESS firmware -- and have done some housecleaning:
Code:
#---------------------------------
# sierra_wireless_disable_flowcontrol.file
# \d == 1 second delay
SAY " Send AT \n"
'' AT\r
OK \d
SAY "Disable flow control\n"
'' at+ifc=0,0\r
OK \d
SAY "Send SMS command CNMI\n"
'' at+cnmi=2,1,0,1,0\r
OK \d
SAY "Clear emergency number list\n"
'' AT!NVENUM=0\r
OK \d
SAY "Set emergency number to 911\n"
'' AT!NVENUM=1,"911"\r
OK \d
SAY "Save Setting\n"
'' at&w\r
OK \d
#---------------------------------
Also in the IFS directory, when you hexedit the ifs-cmc.bin file it reveals another little treat... an SSH root public key ( not as nice as a private key, but hey )
(Sorry about the formatting, this is cut/paste right out of the hex editor)
Code:
ssh-rsa [email protected]
2E..IwU.Q....njle8r9nrJ7h8atg4WfqswU0C0Rk/Ezs/sQs5ZA6ES82MQONjHBd7mw
uo8h0xfj3KeeSHMXCEBpmU26guNE4EqfvdioLFCDUxtvMYswlUZjsvd/NYz9lnUZg2hy
pwzFQjXgSzmHVrHjkKKvq7Rak/85vGZrJKxlvHnowA8JIl1tVNVQjPMNgDDJabaETtfw
LL1KlvAzI81cKOG/3IRn9lU6qyYqyG+zYoza0nN\..7/AtxdL481k81Go5c3NQTnkl2U
68lbu8CpnwrYCU098owLmxdI4kF5UOL4R61ItJuwz30JSESgT..!8RDgM6XEiHUpK9yW
vvRg+vbGWT/oQn0GQ== [email protected]
in /usr/share/MMC_IFS_EXTENSION/bin/cisco.sh and dlink.sh there's another good hint - what adapter you need for USB ethernet
Code:
#!/bin/sh
# Handle an Ethernet connection via the CISCO Linksys USB300M adapter
or
Code:
#!/bin/sh
# Handle an Ethernet connection via the D-Link DUB-E100 adapter
The static IP it brings up if no DHCP is offered is : 192.168.6.1
There's tons more in there -- like the V850 chip has access to the Sierra Wireless CDMA modem, but can configure it for voice calls through the car speakers:
"AT!AVSETPROFILE=8,1,1,0,5" ( embedded in the cmcioc.bin update file )
secondary.iso is a CDROM image and only has /etc/ and /usr
the /etc/ directory has speech_mmc_preinstall.txt and xlets_mmc1_preinstall.txt
the /usr/ directory has /usr/share/speech and /usr/share/xlets ( tons of information about sensors in the car, etc in xlets )
martinbogo1 said:
I tried much the same thing -- the swdl.upd is another CDROM filesystem:
martinb$ file swdl.upd
swdl.upd: ISO 9660 CD-ROM filesystem data 'CDROM'
It contains three more .iso files : installer.iso, primary.iso, and secondary.iso
installer.iso is a CDROM image, but is not mountable on my linux system
primary.iso is a CDROM image, and has the usual /bin, /etc/, and /usr filesystem for an install
the /bin directory has one file - update_nand
the /etc directory has the usual mfgVersiontxt, nand_partion.txt, system_etfs_postinstall.txt, system_mmc_postinstall.txt and version.txt
the /usr/share directory is all the firmware for various components - EQ, HD_FIRMWARE, IFS, MMC_IFS_EXTENSION,OTA,SIERRA_WIRELESS,V850, and XM_FIRMWARE
What's interesting to me is that they did update the SIERRA_WIRELESS firmware -- and have done some housecleaning:
Code:
#---------------------------------
# sierra_wireless_disable_flowcontrol.file
# \d == 1 second delay
SAY " Send AT \n"
'' AT\r
OK \d
SAY "Disable flow control\n"
'' at+ifc=0,0\r
OK \d
SAY "Send SMS command CNMI\n"
'' at+cnmi=2,1,0,1,0\r
OK \d
SAY "Clear emergency number list\n"
'' AT!NVENUM=0\r
OK \d
SAY "Set emergency number to 911\n"
'' AT!NVENUM=1,"911"\r
OK \d
SAY "Save Setting\n"
'' at&w\r
OK \d
#---------------------------------
Also in the IFS directory, when you hexedit the ifs-cmc.bin file it reveals another little treat... an SSH root public key ( not as nice as a private key, but hey )
(Sorry about the formatting, this is cut/paste right out of the hex editor)
Code:
ssh-rsa [email protected]
2E..IwU.Q....njle8r9nrJ7h8atg4WfqswU0C0Rk/Ezs/sQs5ZA6ES82MQONjHBd7mw
uo8h0xfj3KeeSHMXCEBpmU26guNE4EqfvdioLFCDUxtvMYswlUZjsvd/NYz9lnUZg2hy
pwzFQjXgSzmHVrHjkKKvq7Rak/85vGZrJKxlvHnowA8JIl1tVNVQjPMNgDDJabaETtfw
LL1KlvAzI81cKOG/3IRn9lU6qyYqyG+zYoza0nN\..7/AtxdL481k81Go5c3NQTnkl2U
68lbu8CpnwrYCU098owLmxdI4kF5UOL4R61ItJuwz30JSESgT..!8RDgM6XEiHUpK9yW
vvRg+vbGWT/oQn0GQ== [email protected]
in /usr/share/MMC_IFS_EXTENSION/bin/cisco.sh and dlink.sh there's another good hint - what adapter you need for USB ethernet
Code:
#!/bin/sh
# Handle an Ethernet connection via the CISCO Linksys USB300M adapter
or
Code:
#!/bin/sh
# Handle an Ethernet connection via the D-Link DUB-E100 adapter
The static IP it brings up if no DHCP is offered is : 192.168.6.1
There's tons more in there -- like the V850 chip has access to the Sierra Wireless CDMA modem, but can configure it for voice calls through the car speakers:
"AT!AVSETPROFILE=8,1,1,0,5" ( embedded in the cmcioc.bin update file )
secondary.iso is a CDROM image and only has /etc/ and /usr
the /etc/ directory has speech_mmc_preinstall.txt and xlets_mmc1_preinstall.txt
the /usr/ directory has /usr/share/speech and /usr/share/xlets ( tons of information about sensors in the car, etc in xlets )
Click to expand...
Click to collapse
Have you tried connecting to it?
Sent from my iPhone using Tapatalk
sofro1988 said:
Have you tried connecting to it?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I managed to connect with the cisco adapter (usb / ethernet), but I don't know the root password. is the problem at the moment insurmountable ..
Using a cisco connector, I have gotten the ethernet to come up, but that's it. At the moment, there doesn't seem to be anything I can connect to.
@Tajadela - sounds like you at least were able to either SSH or telnet in to a port... I'm on software version 17.43.01 .. which are you on, and what year vehicle? ( Jeep Grand Cherokee, 2015, Uconnect 8.4AN with the 3G Sierra Aircard modem for Sprint )
martinbogo1 said:
Using a cisco connector, I have gotten the ethernet to come up, but that's it. At the moment, there doesn't seem to be anything I can connect to.
@Tajadela - sounds like you at least were able to either SSH or telnet in to a port... I'm on software version 17.43.01 .. which are you on, and what year vehicle? ( Jeep Grand Cherokee, 2015, Uconnect 8.4AN with the 3G Sierra Aircard modem for Sprint )
Click to expand...
Click to collapse
I connected in telnet on a uconnect 6.5 with firmware 15.xx.xx. You can connect to Uconnect with static IP it brings up if no DHCP is offered is: 192.168.6.1
itsJRod said:
I used a hex editor to find the Ssh RSA key and replace it. This passed the initial check to reboot into update mode, but wouldn't pass the full check in update mode. I'm hoping my attempt below will pass that check and still update with the modifications.
Click to expand...
Click to collapse
after rsa key replaced, do you have recalculate the checksum of UPD file?
have you replaced the first 64 bytes of the file?
thanks
@itsJRod, isn't it that you would like to explain the procedure to replace the RSA key in the swdl file? thank you
Hello,
have you made any progress? I am a bit lost. I put the EU uconnect MY15 to US dodge charger MY16 and Perf Pages were working fine even on 16.16.13, although after upgrade to 17.x (17.46.0.1 right now) I am meeting the problem of expired subscription (which is not possible to have on EU radio).
I am considering basically three solutions:
a) going back to US radio, but modify the language pack/nav/FM frequencies (it is doable, but I do not know how, although I can pay for it relatively less than time invested)
b) downgrade to 16.16.13 - I have no clue how to do it, I tried to put swdl.upd with swdl.iso as and installer.iso with no luck of course.
c) take xlets from KIM2/ of 16.16.13 to KIM23 of 17.46.0.1 secondary.iso - this is probably preferred way but I do not know how to make it to pass ISO validation.
Of course root on uconnect is extremely nice to have but I will be fully satisfied with Perf Pages working again.
Hello.
I'm hoping the community can help me out. I have a RAM 1500 with the RA4 (was running the 17.11.07 software that I got pushed to me OTS style a couple years ago. Since them problems, radio turn on delay, no GPS and cellular phone warning popup.
I was told to do the 18.45 update which I got from driveuconnect.com, but this has essentially bricked my radio with the "bolo update failed" error and it is looping continuously
I have tried many ways to modify the update software's manifest.lua script to try to get rid of the sierra wireless portion by manually editing, hex editing, etc but always get the "please insert the USB card" screen.
Uconnect is obviously completely worthless to help me and the dealer wants me to pay them money to tell me what I already know. I know I can pay 300 and send my radio to infotainemnt.com to get it repaired, but I would like to solve this on my own is possible, because I would like to further modify the software to make it more custom and unique.
From my reading the 17x version keeps you from downgrading to a version that can be hacked easily.
Everything seems like it should be pretty straight forward as I have a lot of experience in programming and embedded devices.
It seems they are validating the ISOs using some mechanism, I believe I have tried all of tricks/methods
I have searched the code to see if I can find the iso MD5 or SHA256 hashes that ioc_check is probably using to figure out I changed somethign but nothing work.
I have even tried the swapping the flash drives after validation but it seems they are using the ISos they already copied to continue the process, I then end u getting some invalid errors or the update just crashes out
I got other updates from the link: http://www.mydrive.ch/
http://www.mydrive.ch/http://www.mydrive.ch/
username: [email protected]
Password: gasolio
Havent tried all of them yet, but pretty sure they wont work, due to the 17x security changes.
Any help would be appreciated grealty, I really dont want to shell out any cash for something a company told me to to and due to their screw up with bricking modems, this is now bricking my radio.
Thanks to all in advance !!!
djmjr77 said:
Hello.
I'm hoping the community can help me out. I have a RAM 1500 with the RA4 (was running the 17.11.07 software that I got pushed to me OTS style a couple years ago. Since them problems, radio turn on delay, no GPS and cellular phone warning popup.
I was told to do the 18.45 update which I got from driveuconnect.com, but this has essentially bricked my radio with the "bolo update failed" error and it is looping continuously
I have tried many ways to modify the update software's manifest.lua script to try to get rid of the sierra wireless portion by manually editing, hex editing, etc but always get the "please insert the USB card" screen.
Uconnect is obviously completely worthless to help me and the dealer wants me to pay them money to tell me what I already know. I know I can pay 300 and send my radio to infotainemnt.com to get it repaired, but I would like to solve this on my own is possible, because I would like to further modify the software to make it more custom and unique.
From my reading the 17x version keeps you from downgrading to a version that can be hacked easily.
Everything seems like it should be pretty straight forward as I have a lot of experience in programming and embedded devices.
It seems they are validating the ISOs using some mechanism, I believe I have tried all of tricks/methods
I have searched the code to see if I can find the iso MD5 or SHA256 hashes that ioc_check is probably using to figure out I changed somethign but nothing work.
I have even tried the swapping the flash drives after validation but it seems they are using the ISos they already copied to continue the process, I then end u getting some invalid errors or the update just crashes out
I got other updates from the link: http://www.mydrive.ch/
http://www.mydrive.ch/http://www.mydrive.ch/
username: [email protected]
Password: gasolio
Havent tried all of them yet, but pretty sure they wont work, due to the 17x security changes.
Any help would be appreciated grealty, I really dont want to shell out any cash for something a company told me to to and due to their screw up with bricking modems, this is now bricking my radio.
Thanks to all in advance !!!
Click to expand...
Click to collapse
Just to follow up for anyone who reads this in the future.
I was able to get my uconnect working again a few minutes ago.
As my previous post stated I got stuck in the "bolo update failed" loop.
I downloaded the UCONNECT_8.4AN_RA4_16.33.29_MY16.exe update from the url posted in my previous comment.
I did the S Byte HEX Mod to the swdl.iso file, loaded it and the swdl.upd file on a thumb drive. Used Hxd on windows. Followed the section in the Uconnect exploitation PDF:
https://www.google.com/url?sa=t&source=web&rct=j&url=http://illmatics.com/Remote%2520Car%2520Hacking.pdf&ved=2ahUKEwjZsOGNl5nyAhWhGVkFHZy2AnAQFnoECAcQAg&usg=AOvVaw0NAi3a1eh-IRd3n1VHv-ys
When I plugged it in, it started with the update process, after the first unit, the screen said the Uconnect had to restart, please wait..
And whalaa my radio worked again!!! It even says it has the 18.45 firmware on it.. go figure.. Navigation still does not work, but thats most likely because the sierra wireless card is bad.
I cannot say for sure the S Byte thing did anything, because I'm not messing with this anymore, almost had to buy a new radio.
I would say try it with out, then with it if it doesn't work.
This could also be a fluke with my particular unit, but at least its something else to try than pay 600+ dollars!!
Good luck to anyone else who goes through this mess!!!
djmjr77 said:
Just to follow up for anyone who reads this in the future.
I was able to get my uconnect working again a few minutes ago.
As my previous post stated I got stuck in the "bolo update failed" loop.
I downloaded the UCONNECT_8.4AN_RA4_16.33.29_MY16.exe update from the url posted in my previous comment.
I did the S Byte HEX Mod to the swdl.iso file, loaded it and the swdl.upd file on a thumb drive. Used Hxd on windows. Followed the section in the Uconnect exploitation PDF:
https://www.google.com/url?sa=t&source=web&rct=j&url=http://illmatics.com/Remote%2520Car%2520Hacking.pdf&ved=2ahUKEwjZsOGNl5nyAhWhGVkFHZy2AnAQFnoECAcQAg&usg=AOvVaw0NAi3a1eh-IRd3n1VHv-ys
When I plugged it in, it started with the update process, after the first unit, the screen said the Uconnect had to restart, please wait..
And whalaa my radio worked again!!! It even says it has the 18.45 firmware on it.. go figure.. Navigation still does not work, but thats most likely because the sierra wireless card is bad.
I cannot say for sure the S Byte thing did anything, because I'm not messing with this anymore, almost had to buy a new radio.
I would say try it with out, then with it if it doesn't work.
This could also be a fluke with my particular unit, but at least its something else to try than pay 600+ dollars!!
Good luck to anyone else who goes through this mess!!!
Click to expand...
Click to collapse
I created an account just to reply to this and All I have to say is you're literally an absolute life saver. I've been working on this every day for two weeks now, trying every trick people said, trying every USB, every format, every version and nothing ever worked from me. Uconnect support was absolutely no help and it was a lot of back-and-forth finger pointing and no you need to reach out to this person between them and the dealership. Dealership tried to charge me for a Proxy Alignment when I asked to just update my damn radio stuck in this loop.
I have a 2015 Jeep Cherokee 8.4AN VP4 NA Head Unit 68238619AJ. I was updating from 17.11.07 to 18.45.01 and got stuck at the step 11 1% and would get a failed sierra wireless every time and then got in that "bolo update failed" loop..Well to fix it just now all I did was download the UCONNECT_8.4AN_RA4_16.33.29_MY16.exe update from the url posted in the previous comment and quick format to FAT32 on a 16GB Micro Center USB extracted the files from 16.33.29 to the USB with 7ZIP, plugged in like normal and BOOM it ran the first step restarted and I had a working radio again showing update 18.45.01.
(So i'm assuming you don't have to do the S Byte thing I didn't even mess with it I just used the 16.33.29 to bypass step 11 since that version only has 14 steps and 18.45.01 was already preloaded from attempting before. My navigation still is the wrong address but I don't care about all that just thankful to have my radio back before my wife killed me for trying to update it by myself. )
I hope this helps someone else one day because it took some deep research and hours on hours of forum hoping to finally find the solution. <3
djmjr77 said:
Just to follow up for anyone who reads this in the future.
I was able to get my uconnect working again a few minutes ago.
As my previous post stated I got stuck in the "bolo update failed" loop.
I downloaded the UCONNECT_8.4AN_RA4_16.33.29_MY16.exe update from the url posted in my previous comment.
I did the S Byte HEX Mod to the swdl.iso file, loaded it and the swdl.upd file on a thumb drive. Used Hxd on windows. Followed the section in the Uconnect exploitation PDF:
https://www.google.com/url?sa=t&source=web&rct=j&url=http://illmatics.com/Remote%2520Car%2520Hacking.pdf&ved=2ahUKEwjZsOGNl5nyAhWhGVkFHZy2AnAQFnoECAcQAg&usg=AOvVaw0NAi3a1eh-IRd3n1VHv-ys
When I plugged it in, it started with the update process, after the first unit, the screen said the Uconnect had to restart, please wait..
And whalaa my radio worked again!!! It even says it has the 18.45 firmware on it.. go figure.. Navigation still does not work, but thats most likely because the sierra wireless card is bad.
I cannot say for sure the S Byte thing did anything, because I'm not messing with this anymore, almost had to buy a new radio.
I would say try it with out, then with it if it doesn't work.
This could also be a fluke with my particular unit, but at least its something else to try than pay 600+ dollars!!
Good luck to anyone else who goes through this mess!!!
Click to expand...
Click to collapse
Do you have another link to download the UCONNECT_8.4AN_RA4_16.33.29_MY16.exe files? I am trying to help a friend of mine they way this helped me. Thank you again for this!

Categories

Resources