Develop Bugs

Daydream, overnight Charging and Quick Flashing green light

I'm suffering a strange problem with my new phone ( D855 on H, unrooted runing stock rom )
I ( like I'm sure a lot of people ) use the LG wireless charger next to my bed to charge my phone over night. I then intern use the phone as an alarm clock with the DayDream app.
So, when I got to bed, I put the phone in silent profile and put it on the charger where after about a minuite ( screen timeout setting ) DayDream starts display the clock.( this is a bit hit an miss but thats a discussion for another day )
My problem happens in the middle of the night ( this morning I noticed it aroungd 4:00am ) where the screen is off and the notification light is quickly flashing green ( the battery is fully charged if thats relevant ) . The phone isn't hot btw and knocking on the screen wakes it and stops the light flashing.
If I remove the phone from the charger and put it back on DayDream refuses to start again. If I manually start DayDream, the clock comes up and runs for a short while before the screen goes off and the grean flashing begins again.
Anyone else experienced this strange problem ?
Thanks
Si

I think the issue is your wireless charger. I believe the problem is DayDream is set to display when charging or docked. Since you are wireless charging, the docked setting doesn't apply. In any case, it appears your charger turns off when the phone is fully charged, thus terminating DayDream. This is actually normal and a lot of chargers behave like this, thus nothing really wrong with your charger. What you may need is a new charger that provides a constant trickle charge. Then DayDream should remain active. If you want to confirm, connect the G3 directly to usb cable charger overnight and retest. I bet you will find that DayDream stays on in this case. I recently purchased and tested Tylt Vu. The Vu does what you would want in this scenario and provide a constant charge even though battery is full. You can see my review here of 2 different chargers (Vu vs. A6). A6 behaves as yours does and Vu provides constant charge.
http://forum.xda-developers.com/tmobile-lg-g3/accessories/tylt-vu-vs-itian-a6-qi-charging-stands-t2862775

cbb77 said:
I think the issue is your wireless charger. I believe the problem is DayDream is set to display when charging or docked. Since you are wireless charging, the docked setting doesn't apply. In any case, it appears your charger turns off when the phone is fully charged, thus terminating DayDream. This is actually normal and a lot of chargers behave like this, thus nothing really wrong with your charger. What you may need is a new charger that provides a constant trickle charge. Then DayDream should remain active. If you want to confirm, connect the G3 directly to usb cable charger overnight and retest. I bet you will find that DayDream stays on in this case. I recently purchased and tested Tylt Vu. The Vu does what you would want in this scenario and provide a constant charge even though battery is full. You can see my review here of 2 different chargers (Vu vs. A6). A6 behaves as yours does and Vu provides constant charge.
http://forum.xda-developers.com/tmobile-lg-g3/accessories/tylt-vu-vs-itian-a6-qi-charging-stands-t2862775
Click to expand...
Click to collapse
Thanks for taking the time to reply
I'll give that a go tonight and see if thats whats causing the problem.
Cheers
Si

Weird battery and charging issue I need help with!

Been using my Moto 360 for months, no problem. Yesterday I was travelling so I used up more battery before going back to the dock than I usually would. I want to say it was down to maybe 10%. Maybe lower.
Threw it on the charging dock. I see the small blue circle, charging, and I walk away. Come back a few minutes later and the screen was off and white LED on charging dock was off. Couldn't do anything to get the white LED back and show that it was charging. I could pick up the watch and use it, but had very low battery. At some point I think it died, and again, I could never charge it.
Got frustrated, left it off the dock (because I read something on a moto support page about leaving it off the dock for 30 minutes?), and went to bed.
This morning, woke up, and put it on the charger. The white LED came on and the watch booted up. At first it shows charging and even says 13%. How that's possible I don't know, but the white LED wouldn't stay on. It would go off, at which point the regular watchface would show up and also the warning about being below 15%. Then a few seconds later the white LED would come back on and I'd get the charging screen. but that would only last a few seconds, then it would go off, and my watch face would show up. I just watched as it did this and you should see from the times the charging screen did pop up that it was actually draining battery (if you believe I was even at 13% this morning, which I don't). After a few minutes of this, the white LED was off and I can't get it back to charge at all. I'm sitting here this morning just as I did last night: watch won't come on and no white LED light on the dock and what looks like no charging.
What is going on here? Again, ZERO problems until this. Now my battery is so low that it shut off and I'm just leaving it on the dock hoping that somehow it is charging, even though the white LED on the dock is not coming on. I know I shouldnt have let my battery get so low before juicing it up, but that doesn't mean I should be sitting here unable to charge up my watch. I really don't think something all of a sudden yesterday happened to my watch and dock.
Anyone have any ideas here? Im on the road, so no qi plate here to test using a different method to charge it up (I have it at home, but I really wanted my watch to use for this trip!). Don't know anyone with a moto 360 either.
Thank you!!

Try a different USB cable/charging brick combination, they could be bad. If this doesn't work, most likely a bad dock.

Well I tried a different cable, no change. Left it sitting on the dock all day, nothing happened. Came home from going out and the charging/not charging is happening now ( and all of a sudden the watch got juice? Makes no sense to me.). I videoed it. Does this video shed any light on the cause? Thanks! I ask because it's hard to believe the dock is bad after no issues for months now.
Video: https://youtu.be/jmMH15ThOwg
Thanks again.

HEHE, same issue mate:
https://drive.google.com/open?id=0B_Qhf7E5ZWBTbW56elNSVUZLR1E
I have sent mine to Motorola twice now for the same problem.
They just sent the watch back to me and I don't get the issue anymore, however they have introduce a new problem for my watch where I can't even use tilt to wake anymore...
Fed up with their repair team, just asked them to replace the watch now because either their repair team has no clue how to fix it or that there is some other fault they cannot find.
pappy97 said:
tagging pappy97
Click to expand...
Click to collapse

i have a similar issue. it seems that the craddle connection is not as strong as it used to be. I often times see my watch charge all the way to 100%, and then begin to slowly dwindle down. I have to take the watch off the charger and then place it back in "more securely", and then it would charge again.... anyone else?
i think i figured it out. i had a dual USB wall adapter that both my phone and watch were plugged into. only recently did I get a QI wireless charging pad. it appears that when both devices are charging, the phone took up all of the juice, leaving none for the watch (until the phone reached 100%). when I separated the two into different USB wall plugs, then they both charge up as normal.
hope this helps others.

I'm experiencing this exact same issue right now. I'm leaving it on the dock hoping that it starts to charge at some point. Have you discovered a fix or a possible cause for this issue so far?

I'm having the same issue. Started yesterday afternoon. I have 2 charge cradles and its the same on both so it leads me to believe its not a cradle issue. When I put the watch on the cradle, the charge light will come on for a few seconds and then go back off. After this happens a couple times it just wont come on anymore. Any help would be greatly appreciated.

I have the watch for almost 2 weeks and it never charge full and it loose all its charge in minutes I only used it 2 and it was off charge. Wife wi go home I am tired I like the watch. But I didn't use it I tried everything from the above mentioned proposals but seriously nothing worked I'm from Egypt and I bought online from USA from Nordstrom what should I do

Problems charging watch when switched off - overheating

Hi!
I bought my Sony Smartwatch 3 about two months ago. I've always updated the watch and now I'm on the latest build MWD49B.
I don't know precisely when the problem started, but for sure also before updating to the latest build it already showed it.
Basically if the watch is turned off it won't charge and it'll overheat a lot. I mean it maybe charges at an absurd rate, like from 60% to 100% in about 4 hours.
I tried changing charger (1A and 2A) and charging cable, but it doesn't change. It's like stuck in some way. The funny thing is that when it is stuck in this state if I turn it on (with the same chargers and cables) it starts charging fast (normal charging times) and funny enough it gets colder than when it's turned off charging (I mean slightly hot but colder than when it's stuck).
Do any of you has this problem?
Could it be a SW problem too or just HW? I haven't tried to reset it yet, but would rather lose time in resetting it and reinstalling all my stuff than losing time in the RMA process and waiting time to have it repaired, even because thinking of running without it makes me feel already mad!

I also have MWD49B and I'm charging my watch with (AFAIK) a charger which was bundled with Xperia PLAY docking station. Its output is around 500mA. Sometimes I was charging the watch with EP880 charger (output 1,5A) and I was charging it with BlitzWolf charger (output 2,4A). I've never had any problems with overheating and I pretty much never turn off my watch even when charging.
The problem is that some watches (especially the fresh ones from 2014 with glossy grey cap on microUSB port, not the full rubber ones like my watch have) might have faulty battery. If it overheats, charges 4 freaking hours... well it's REALLY long... my 500mA charger charges my watch up to one hour and I have no problems at all...
If you still have warranty, I'd suggest returning the watch, this overheating might be dangerous.

Hi!
Thanks for the answer.
My watch is from an April 2016 batch (written on the box), and it's one of those with the rubber cover on the charging port.
Just to be clear, if I charge the watch when it's ON, I don't have any problem and it is charged in less than one hour, the overheating problem and non-functional charging is present only when the watch is switched off and it is charging.

Me too...
I bought my Sony Smartwatch 3 about one years ago...
Whan I first charge it from PC's USB port , the same problem with you..
I don't know why...even I reset watch , it's the same...
So..I always charge the watch when it's ON...

jackal992 said:
Hi!
Thanks for the answer.
My watch is from an April 2016 batch (written on the box), and it's one of those with the rubber cover on the charging port.
Just to be clear, if I charge the watch when it's ON, I don't have any problem and it is charged in less than one hour, the overheating problem and non-functional charging is present only when the watch is switched off and it is charging.
Click to expand...
Click to collapse
I have the same, "new" batch, with rubber cover on USB port.
I'm not sure if I missed some of your text from the original post or you edited it. I'm talking about switching the watch on so it does not overheat.
I've noticed my watch behaves exactly the same! If it's turned off and charging - it's hot like hell and not even fully charged after two hours and if turned on and charging - cold and fully charged after like... one hour.
Strange because on earlier Android Wear builds everything was ok.

Same over here.
But I didn't try charging it while it is running.
But when it's off, it only charges up to 75% and gets insanely hot. Then, when used it drains normally until around 50%. After that, the battery dies within 1-2h
I also never had any issue with the battery before the last update.

zapp_em said:
Same over here.
it drains normally until around 50%. After that, the battery dies within 1-2h
Click to expand...
Click to collapse
Sign of dead lithium battery

jackal992 said:
Hi!
I bought my Sony Smartwatch 3 about two months ago. I've always updated the watch and now I'm on the latest build MWD49B.
I don't know precisely when the problem started, but for sure also before updating to the latest build it already showed it.
Basically if the watch is turned off it won't charge and it'll overheat a lot. I mean it maybe charges at an absurd rate, like from 60% to 100% in about 4 hours.
I tried changing charger (1A and 2A) and charging cable, but it doesn't change. It's like stuck in some way. The funny thing is that when it is stuck in this state if I turn it on (with the same chargers and cables) it starts charging fast (normal charging times) and funny enough it gets colder than when it's turned off charging (I mean slightly hot but colder than when it's stuck).
Do any of you has this problem?
Could it be a SW problem too or just HW? I haven't tried to reset it yet, but would rather lose time in resetting it and reinstalling all my stuff than losing time in the RMA process and waiting time to have it repaired, even because thinking of running without it makes me feel already mad!
Click to expand...
Click to collapse
I've had this exact problem. One thing I discovered is the battery will stop charging when it reaches a certain temperature. Try placing a fan to blow directly on it while it's charging. This has worked for me.
Sent from my SM-N920T using Tapatalk

jackal992 said:
Hi!
I bought my Sony Smartwatch 3 about two months ago. I've always updated the watch and now I'm on the latest build MWD49B.
I don't know precisely when the problem started, but for sure also before updating to the latest build it already showed it.
Basically if the watch is turned off it won't charge and it'll overheat a lot. I mean it maybe charges at an absurd rate, like from 60% to 100% in about 4 hours.
I tried changing charger (1A and 2A) and charging cable, but it doesn't change. It's like stuck in some way. The funny thing is that when it is stuck in this state if I turn it on (with the same chargers and cables) it starts charging fast (normal charging times) and funny enough it gets colder than when it's turned off charging (I mean slightly hot but colder than when it's stuck).
Do any of you has this problem?
Could it be a SW problem too or just HW? I haven't tried to reset it yet, but would rather lose time in resetting it and reinstalling all my stuff than losing time in the RMA process and waiting time to have it repaired, even because thinking of running without it makes me feel already mad!
Click to expand...
Click to collapse
Same problem here.
I've got the SW3 of 2015 vintage (it does have a cover over USB - I thought they all did?)
Since updating, if watch is off while charging it gets very hot, charges very slowly and never to 100%.
The solution is simple enough - charge it while OS is running.
If the watch is out of juice: Start charging, let it get enough to boot and then again allow it to complete charging with Android Wear running. Then charges normally (about an hour) and doesn't get hot.
My feeling is this is a software issue too. I'm running M1D63G.
Since we all know batteries don't appreciate getting cooked, I'm wary of leaving it charging for long when off, I'm betting it will cause battery damage eventually.
Conspiracy theorist's might even suggest it's Sony's way of ensuring our SW3 batteries die, so we're ready to update to the SW4 - I'm not that cynical.

Hello everyone, here's the matter don't know where to ask it so this thread is similar...
I have 2 Sony3 watches, one with screen partially broken and the second I got it secondhand with a charging base made by the previous owner.
The watch that came with the charge base it always has the charge icon on screen even if it's not charging, sometimes if i reboot it dissapears but most of times it STAY :/
if i turn off watch vibrates and start "charging" all alone without connecting it so i don't know what to do with that cause it obv drains battery and its never really off...
Second thing, my old watch with broken screen worked well since i plug it into that base.... then is doing the same as the other watch, charging forever without charger seems like the base charge illness has affected my old watch too... XD
So pleaaase anybody know something about this? i've restarted them several times and with pcCompanion and the icon remains maybe a custom rom will solve or is hardware issue?

I am using may sony smart watch 3 for long time and i kept it for some month after then i carry it and begin to charge it but it will only show sony and then will not proceed i kept it again after i carry it i plug the charger and it only vibrate

This watch needs to be recalled or have an emergency firmware update. My smartwatch 3 overheated while plugged in overnight and melted apart. Thankfully it was on a metal computer case and not some paperwork. This annoyance has become a real safety issue. It's a shame because I loved this watch otherwise.

Just a general FYI to all of you, use a USB Port or a charger that charges slow and always turn it on when you charge it.
Our watch is really different compared to anything nowadays. It shouldn't but still charges faster than it (should) be allowed.
My Watch is still with it's first Battery and it holds for at least a day, just be careful

tablet drained completely, charges REALLY, REALLY slow... Battery replacement needed?

Hi all,
Recently I discovered my SM-T800 is charging really slow. This happened after my wife was watching Netflix (with a Chromecast) on it. The app crashed (tablet could not be switched off) and was drained completely. Since then the SM-T800 charges really, really slow…
And when I talk of really slow, I mean: really slow. Like more than two days (!) to charge from (almost) zero to 100%. It does not matter if tablet is in standby (on airplane mode) or switched off completely… When I turn the tablet on, it discharges, even when connected to the original adapter. I have tried several devices on the adapter and cables: they all charge flawless (no adapter/cable issue). I also tried another adapter, which did not make a difference.
Does this mean I need to replace the battery now? Because I can hardly use my tablet normally now…
Many thanks for any thoughts, solutions, etc.

At first, try to charge using another cable and charger. Some cables wear over time and che charging speed can be severely affected.

I tried it and it seems to work! Thanks!!

How hard is it to change the tab S battery
Sent from my SM-T800 using Tapatalk

saywhat1001 said:
How hard is it to change the tab S battery
Sent from my SM-T800 using Tapatalk
Click to expand...
Click to collapse
It's pretty easy: https://www.youtube.com/watch?v=VnUEMyDs27I

If you open the tablet up check to see if the wires coming off the battery itself are fully inserted into the plastic female connector that makes the connection to the tablet itself. You should not see any of the metal adapters crimped onto the wire ends. I had one of them partially visible and it was causing problems that ranged from slow charging to sudden battery level swings. The tablet would glitch to the point of unusable with 80% battery left. If I plugged it in I could use it, but what good is a tablet you have to keep plugged in. I reinserted that one wire fully into the plastic connector and haven't had any issues since. I'll keep my fingers crossed that it'll be that simple for you, but if it isn't no worries. The batteries are inexpensive and the tablet comes apart fairly easily.

General Pixel Stand 2 stops charging

This started happening a couple of weeks ago, prior to the latest update.
When I put my P6P on the Stand 2 at the end of the day, I get the little sound and animation that it started charging. After a few seconds I see the message at the bottom that it's "charging wirelessly" and a time until full. I have the stand set on Max Charging and adaptive charging turned off. After a minute or two, the fan comes on. About 10-15 minutes later, it stops charging, (the message goes away and the current % is shown), and the phone is really hot. No matter how long I leave it, even overnight, it never starts charging again. The phone remains really hot until I remove it from the stand.
About 50% of the time, if I reboot it, it will behave normally again, but last night nothing I did would get it to charge wirelessly. I ended up plugging it into the wire. It never gets warm when charging on the wire.
It has been working fine since I purchased it in Nov. This just started a few weeks ago. Has anyone else seen this?
Dave

Try cable charging.
Charging will disengage if the battery temperature gets too hot, about >103F
Fast charging may disengage if the temperature gets beyond 95-100F.
Ideal charging battery start temp is 82F.
Erratic charging can indicate a failed battery.
Any swelling is a failure, replace asap if so.

blackhawk said:
Try cable charging.
Click to expand...
Click to collapse
As indicated in my OP, cable charging works fine every time. The phone doesn't even get warm. It's only wireless charging that's an issue, and not every time I try to charge it wirelesly. It's like the phone decides to stop accepting the power, and it starts to heat up because of it.

I take it you don't have a second wireless stand to rule out if it's the phone or your STand 2 that's behaving badly?
I have been using a genric set-up from charger to stand with my P6P and did have charging issues a few months ago with wireless charging not working correctly but the May update fixed it.

Dataman100 said:
As indicated in my OP, cable charging works fine every time. The phone doesn't even get warm. It's only wireless charging that's an issue, and not every time I try to charge it wirelesly. It's like the phone decides to stop accepting the power, and it starts to heat up because of it.
Click to expand...
Click to collapse
May be a hardware failure in the phone or stand.
Remove a case if it has one and try.
C ports generally last for thousands of charge cycles and cable charging is better for the battery, produces less heat.

FoneWatcher said:
I take it you don't have a second wireless stand to rule out if it's the phone or your STand 2 that's behaving badly?
Click to expand...
Click to collapse
No, unfortunately I only have one stand. I'll keep trying things to see if I can narrow down the exact situation when it occurs. I was mainly checking to see if anyone else had something similar happen and there was a quick fix.
blackhawk said:
C ports generally last for thousands of charge cycles and cable charging is better for the battery, produces less heat.
Click to expand...
Click to collapse
Yeah, and I've always used cable charging on all my phones in the past with no issues. I thought the stand was cool in that it could fast charge and keep the phone upright so it's easy to read in the middle of the night. I'd really like to keep using it. It was stupid expensive and I'd hate to let it go unused for that price.
Thanks!
Dave

I've been experiencing similar problems with my Stand. Sometimes it charges normally, sometimes it charges REALLY, and I mean really slow... And sometimes I get the "Not charging" message for whatever reason.
I think it's gotta be an issue with the adaptive charging on the Pixel 6 Pro, because every time I put my other phone on the stand, my S21U, it charges without any issues.

Dataman100 said:
Yeah, and I've always used cable charging on all my phones in the past with no issues. I thought the stand was cool in that it could fast charge and keep the phone upright so it's easy to read in the middle of the night. I'd really like to keep using it. It was stupid expensive and I'd hate to let it go unused for that price.
Thanks!
Dave
Click to expand...
Click to collapse
Yeah, I feel you. It could be firmware, a SEU which are rare but do happen. A reflash would fix it if so. Probably not worth the trouble to try and more likely to be hardware.
Cable charging be the best plan for now I think.
The old micro connectors were horrible and invariably would fail. The C connectors are much more robust. This N10+ is heavily used and the C port jack is still tight and has well over a thousand cycles plus a few drops and pulls. Even the original cable is still AOK.

Just came across this thread while looking for similar problems on my P4 with a 1st Gen stand. The phone showed the normal 'xx% charging wirelessly' display then at 79% it changed to simply '79%'. After a while the message went back to 'xx%charging wirelessly'. I took the phone off the charger and using a utility app called 'inware' I looked at the battery temp which was at 41.5C/106F.
So I'm guessing that the phone will stop charging when the battery gets hot and resume when it cools down a bit. What is 'too hot' and when does it cause damage, I have no idea. Google told me in a chat session the other day that it's perfectly acceptable to leave the phone on the stand all day. Personally, I take it off at about 80% charge which lasts me all day.

Mine also has this behaviour, taking it off and placing it back on continues to charge

I just sent my stand back for similar reasons - not good when a $12 Qi charger from Amazon was doing a better (and faster!) job charging.

I sent mine back too & am now using a charger that I bought at IKEA for £5. It's a shame as I thought that Google would have made more effort to integrate the charger & phone. Oh well, bling gone!