Hey Everyone
I was just going to post here to see what you think of the dbrand skins for the OnePlus One. I have been getting slightly annoyed with the somewhat bulky case I have and was wondering what your experience with the product and company has been like. Please state which skin you bought and your thoughts on it, both good and bad.
Thanks!
Have a few dbrand skins on cases, but if your into wood like skins, dbrand offers on two (2) for the 1+1..BUT.."Sticker Boy" offers fifteen (15) wood like skins, I have both dbrand skins (wood like) and ten (10) of the Sticker Boy skins, and they are just as good or better than the dbrand, fit well and durable..I'd certainly suggest Sticker Boy skins, they have ALOT more choices for the 1+1..
Here's a link for a look at a few of my Sticker Boy skins..I also have photos of dbrand..but prefer Sticker Boy..cost is about the same, Sticker Boy shipping is MUCH faster, by a week or so..
http://forum.xda-developers.com/showthread.php?t=3091530
sent by my: SandStone Black 1+1
(aka) OnePlus One, OPO (Device 1 of 2)
Related
Hey guys just wanted to get your thoughts on this two cases I found on Ebay.
White Hard Outer Shell and Black Inner Silicone Skin
http://www.ebay.com/itm/Case-for-Sa...ccessories&hash=item231e29757d#ht_1977wt_1049
white shell/holster combo
http://cgi.ebay.com/ws/eBayISAPI.dl...sPageName=VIP:watchlink:top:en#ht_2522wt_1037
Thanks In Advance
nativi said:
Hey guys just wanted to get your thoughts on this two cases I found on Ebay.
White Hard Outer Shell and Black Inner Silicone Skin
http://www.ebay.com/itm/Case-for-Sa...ccessories&hash=item231e29757d#ht_1977wt_1049
white shell/holster combo
http://cgi.ebay.com/ws/eBayISAPI.dl...sPageName=VIP:watchlink:top:en#ht_2522wt_1037
Thanks In Advance
Click to expand...
Click to collapse
What are you looking for in a case? Obviously you like it to be white, but what else?
asianrage said:
What are you looking for in a case? Obviously you like it to be white, but what else?
Click to expand...
Click to collapse
Good protection, easy to remove, looks good and that it will feel good in the hand while not adding bulk to the device I like it thin.
The first case looks like it would add a fair amount of protection, and it's also aesthetically pleasing. It looks like it may add a tiny bit of bulk though; although, it might make it a little more pleasing to hold.
The second case doesn't seem that it would offer a lot of protection, but the holster is definitely a plus, and the case is fairly slim.
nativi said:
Good protection, easy to remove, looks good and that it will feel good in the hand while not adding bulk to the device I like it thin.
Click to expand...
Click to collapse
If you like it thin, then cross that first option off the list. Duo layered "hybrid" cases aren't thin by design. The thinnest I know, is from Seidio, with very nice in-hand feel and good protection.
The other white case with the holster won't offer you top or bottom protection if you ever drop it. So cross that off as well.
If you want single layer solution, you should consider TPU, it's a popular choice for a reason (beside price). CruzerLite and Diztronic are good options. CruzerLite's Androidified cases are noticeable thinner than Diztronic's classy version, but both are recommended. I wouldn't recommend any white TPU though, since they love to suck up color that rubs against them.
What I'm currently using now is a bumper case. There's a few threads about it. My version did have the TPU separation problem, but once I've placed a few dabs of superglue on area, I've experienced only satisfaction with the case. Here's the eBay page for it. I bought one copy from a similar seller, and a couple more from an online website that have stopped offering them. Needless to say, price have risen up a bit since when I bought them last.
asianrage said:
If you like it thin, then cross that first option off the list. Duo layered "hybrid" cases aren't thin by design. The thinnest I know, is from Seidio, with very nice in-hand feel and good protection.
The other white case with the holster won't offer you top or bottom protection if you ever drop it. So cross that off as well.
If you want single layer solution, you should consider TPU, it's a popular choice for a reason (beside price). CruzerLite and Diztronic are good options. CruzerLite's Androidified cases are noticeable thinner than Diztronic's classy version, but both are recommended. I wouldn't recommend any white TPU though, since they love to suck up color that rubs against them.
What I'm currently using now is a bumper case. There's a few threads about it. My version did have the TPU separation problem, but once I've placed a few dabs of superglue on area, I've experienced only satisfaction with the case. Here's the eBay page for it. I bought one copy from a similar seller, and a couple more from an online website that have stopped offering them. Needless to say, price have risen up a bit since when I bought them last.
Click to expand...
Click to collapse
Thanks that's kinda what i want but for the VZW model
I bought a case which looks very similar to the first one off amazon which fit very loose. I tossed the case out the day I got it. The phone was literally falling out of the case.
A link to the one i bought. Dont get it.
http://www.amazon.com/gp/product/B006SBR4TA/ref=oh_details_o03_s00_i00
nativi said:
Thanks that's kinda what i want but for the VZW model
Click to expand...
Click to collapse
I have the VZW GNex. The bumper fits just fine. The top rim doesn't completely fold over onto the screen, but unless you're super OCD, it's negligible. The overall feel of the phone + case won me over. You should at least try it. For only 3 bucks (when I bought it), it's a great case for me.
I've been looking for a decent case for the new nexus 7(2013).
I've searched for a few days and finally these three products caught my eye.
1. Kayscase X-shape TPU back case - $10.95
All of the reviews are pretty favorable and it actually looks pretty decent, too. However, I'm just worried that this one is kinda too thin to protect the device properly.
2. Poetic Graphgrip Silicon case - $8.95
I actually like this one the most because it looks sturdy and not too thick or thin and I'm pretty sure that this one will protect my device very well. Also, the prices is OK, too.
However, the problem is everybody is complaining about the smell. Reviewers say it has the very strong smell of either diesel or kerosene. I'm not sure putting it outside to air out will make it better or not.
3. Mivizu Neoprene Sleeve Zip case - $11.95
This one is a sleeve case. The case looks pretty decent but there are not many reviews for this one. I'm not sure it's because whether people don't like a sleeve case or this case just sucks.
What do you guys think about these three?
I'm waiting for a full matte tpu case. In the meantime I just ordered this - http://www.etsy.com/listing/112753793/new-nexus-7-case-sleeve-pouch-2nd-gen?ref=cat_gallery_1. You can mix match your colors.
Sent from my HTC6500LVW using Tapatalk 4
I think 2 is quite nice.
I had THIS ONE for my 1st gen it wasn't bad.
1.KAYSCASE X-Shape TPU Back Case
http://www.amazon.com/KAYSCASE-X-Shape-Generation-Android-Compatible/dp/B008Z78BO2
2.Poetic GraphGrip Case
http://www.amazon.com/Poetic-GraphGrip-Android-Manufacturer-Warranty/dp/B00E7FY910
3.Mivizu Neoprene 7" Sleeve
http://www.amazon.com/Mivizu-Neoprene-Sleeve-Google-Galaxy/dp/B00DD7204G
Found it in green for cheap.
http://www.amazon.com/Mivizu-neoprene-Kindle-Fire-accessories/dp/B006MK7YF6
Thanks for the link ! I actually wanted to put links as well but i couldn't do that because this was my first post
By the way, which one do you think is the better for the nexus 7(2013) , folio case or silicon case?
I was looking at the minimalistic cases for the HTC ONE M7 and I read some posts saying that the thin cases looked better on the silver one. Would love a good look and a good grip, something that doesn't take away from the overall beauty of the phone or add too much weight. Anyone rocking a thin case on their HTC one and which one?
Last week I bought this one:
http://www.amazon.de/gp/product/B00CK9I2NG/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I love this case, it's small, black and feels great.
But it protects your phone only from scratches on the back
I got the "ULTRA SLIM RUBBER SOFT SILICONE GEL SKIN BUMPER TPU CASE COVER FOR HTC ONE M7" from ebay and feel it provides great protection (bottom and top) for a very excellent price point.
igadgitz Schwarz Leder Beutel Tasche Schutzhülle Hülle Ledertasche Lederetui Etui Case für HTC One M7 Android Smartphone
http://www.amazon.de/igadgitz-Schut...=1411309668&sr=8-8&keywords=htc+one+m7+tasche
is my case and i love it!
i am really looking forward to buy a nice case for my nexus 5 (also cheap)
Are this worth buying ?
http://www.ebay.in/itm/321781963774?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
http://www.ebay.in/itm/321781963499?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
http://www.ebay.in/itm/321781963792?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
waiting for replies
Thanx in advance
I personally use spigen and metal/aliminium bumper. Both are top quality cases. But since i got dbrand skin i cant use bumper. Rest is okay. So i will suggest you spigen and bumper. But didnt use any battery case. (also they re so big and ugly in my opinion)
The only good one I see is the spigen. There are tons out there, keep looking.
That also isn't a genuine Spigen case. It looks like one of the cheap Chinese clones.
You can see the exact same picture here:
http://www.aliexpress.com/item/Slim-Luxury-Armor-PC-TPU-Dual-Layer-Cool-Case-For-LG-Nexus5-Mobile-Phone-Accessories-With/32272128275.html
I use this one http://www.amazon.com/Nexus-Case-Protection-Absorption-Premium/dp/B00EPLTFIS
Very happy with it,my phone took some pretty bad hits but it was ok
Looks good,and you can customize the back with a picture of your choice,there are templates on xda....or just apply some carbon skin on it and still looks good !
try metal/aliminium bumper it will defend the device much great then plastic.
Recommended cases for N5
I just bought a Nillkin Nexus 5 case. Ultra Slim.
Nillkin makes great cases that offer maximum protection with a minimal profile.
And I recommend these:
LG Hardshell Nexus 5 Black (US)
TEMEI Ultra-thin Protective TPU Back Case for LG Nexus 5
Diztronic Matte Back Black Flexible TPU Case for LG Nexus 5
I use the Spigen Slim Armor, its awesome, I have occasionally switched between the Spigon:
http://www.amazon.com/Nexus-Case-Sp...1435952280&sr=8-1&keywords=slim+armor+nexus+5
And this one: (because its cool looking and I get compliments)
http://www.amazon.com/Nexus-Cruzerl...d=1435952889&sr=8-1&keywords=nexus+5+bugdroid
Would be great everyone can share the findings of leather cases for the Pixel 2 XL here...
So far I am aware of two
Belleroy - https://bellroy.com/made-for-google
-----------------------
Quite expensive, doesn't cover all sides
X-Level - https://www.amazon.com/X-Level-Vintage-Premium-Leather-Protective/dp/B0768JJ272
-----------------------
No volume cutouts, poor quality where inner material is visible.
I bought this case.
https://www.amazon.com/gp/product/B074CK7TFP/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
ripped out the crappy pvc case ans super glued in the Spigen thin case.
https://www.spigen.com/collections/google-pixel-2/products/google-pixel-2-xl-case-thin-fit
So far its holding up and feel good in the hand for fake leather.
I bought the Torro premium folio leather case very nice and sturdy
Got this guy to creat a 2xl case for me.
I already got one for a p10 that is just perfect.
Waiting for the 2xl to be delivered..
Edit
Sorry cannot post links, but search etsy for twoneedlesleather a guy in Australia
Sent from my VTR-L29 using Tapatalk