[Guide] Pre, Rooting and After Defy Mini detailed for beginners - Defy General

I am beginner too, and i am not a developer for sure. But did many tests with available methods for root, all of it do not work properly for my ROM. And I also tried provable method with ROM, like Orange_Spain. Yes its root is easy and fast and work properly, but my rom is not Orange_Spain .
So i spend a few days to try, test and combined available methods for root my Mini, and i think i find out the universal and safe root method by combined other available methods. And now i believe that combined method is universal for use. Anyway the rooting is a kind of hacking, and when u did something like that, is very possible to received any bugs or to brick the phone. But if u really want to root the Mini, if this method don`t did it for your rom, try it once more time and be sure u did all as is described. Even if this still don`t work properly for your rom, i advice to do not give up, and to try find the solution.
The other reason to post my experience here, is to made one detailed guide, step by step for ppl without any experience about that.
The short version of the guide will be posted at the end of this post.
[THE GUIDE]
I. THE PRE - things u need to do before start the rooting process.
*Make a backup of your Phone, the backup of the files in the sd card is easy. U can also search and download a bunch of software which can did u full backup of your ROM. And once u have the backup save it to ur PC. Or u can find your firmware ROM here. There a lot of firmware ROMs.
*u can check your ROM version, by tap Settings->About the phone and scroll down to "software version". Different ROMs may have a lil bit various menus.
1. Download and install on your PC the following software: - i used random share site and if you don`t trust about my links, u may find the following files and software from other sources.
RDS lite -this is your software necessary to flash
the phone
MotorolaDeviceManager - sotfware drivers for ur Mini.
Minitool Partition Wizard -this is your software (Windows OS) to made an ext partition on sd card.
2. Now download this package
root_xt320 -it is the files shared from user @rootdefyxt320
II. THE ROOT
1. Remove the SIM card. - this is not necessary, it it just in case to not leak ur SIM internet, and to not slow the following procedure in case if u have many contacts on ur SIM.
2. Check do u have fastboot mode on your phone. U can do it by - first - power off the phone and second - press and hold for few seconds both VOL -(minus), VOL+ and POWER buttons. If u have fastboot mode on the screen u will see on the top that inscription - fastboot mode, if u dont have fastboot mode u will seee on the screen one big image of the android cartoon and some open package .
So my rom don`t have fastboot mode, but neither your phone have i it, i advice to execute the following step 3, which main reason is to obtain the fastboot mode but i feel is not only about that. The whole process is explained from point 3. to 3.16. bellow.
3. To do it you must did the method posted by user @rootdefyxt320 in this tread.
I will try to describe the method a lil bit detailed for absolute beginners and a lil bit different step-by-step adapted for my method
It is -
3.1. Power off the phone
3.2. Make a new folder on your PC. Now download MotoAndroidDepacker and SBF-recalc.
3.3. Now, u already must have a backup of ur ROM, by doing it by ur own, like is mentioned at the start of the tread, or u must have already downloaded ur desired firmware ROM from here, anyway the file extension must be .sbf. Check this before to proceed bellow.
3.4. Make a new folder on ur PC, then copy MotorolaAndroidDepacker and ur .SBF ROM (it is mentioned in previous step 3.3.).
3.5. Start MotorolaAndroidDepacker(MAD) by clicking on it icon and select the button 'Open From file', then select the SBF (it is mentioned in previous steps 3.3. and 3.4.)file and open that file. If u r truly beginner, just select ur .sbf file, then press F2 on ur PC keyboard and rename the file to "Bunny.sbf".
3.6. Now on working screen of MAD click on the button 'Split to folder'. After that u must received a new folder in ur main folder, with the same name like the splitted .sbf, but with the word '-extracted' at the end. In example if ur .sbf file which u splited already is named "bunny", then the folder which u will received will be named "bunny-extracted". And i will use that name in following steps of explanation. And this new folder must contain three files - CG2.smg, firmware.hmg and RAMDLD.smg.
3.7. Again select the button 'Open from File' on MAD and change the selection of file type to 'MOTOBLUR mbn image (*CG2.smg)'. And open the CG2.smg file which u received in step 3.6. And hit 'Split to folder' again. Now in ur last current folder, u will received a new folder, named "CG2-extracted".
3.8. Now download these files, posted by user @rootdefyxt320. Unzipped the files, then copy all files and pasted and replaced it in the folder named "CG2-extracted".
3.9. Now on ur still opened MAD, select 'Open Files Folder' and open the folder named "CG2-Extracted" . Hit 'compile file' option. Now in the last current folder named "CG2-extracted" u will received a new folder called "rebuilt". That folder contain a new file named CG2.smg. Now copy that file CG2.smg and the files, named "firmware.hmg" and "RAMDLD.smg" from the folder named "Bunny-extracted", and put all these three files in in the new, fresh folder, named "Final".
3.10. Open SBF-recalc program, and select the button 'Open CG-Folder, and open the folder named "Final".
3.11. Now select 'Create SBF-File' and wait for a moment. After the process ended u will received a new folder in the last current folder which we named "Final". That new folder must contain just one file, named firmware.sbf. Can copy that file in one fresh folder or just on PC desktop. Anyway next step which u need to do is to flash that final "firmware.sbf" to ur phone.
3.12.To do it u need to put the phone in flash mode by pressing and hold both VOL -(minus), CAMERA and POWER buttons.
3.13. Plug in the phone to the PC through your USB cable.
3.14. Start RSDlite. If all is fine on the working screen of the RSDlite u must view the message that prove ur phone is connected to the pc in real. Now using RSDlite open that final "firmware.sbf" file which u received at the end ot the step 3.11
3.15. Press start, and wait until RSDlite flash the phone with the new .sbf file. At the end of the process, on the working screen of RSDlite u may see messages like - "PASS" or "Manually start ur device" or "in processing". Anyway, the important is to check is that in the working screen of the RSDlite the whole process is ended on 100%.
3.16. Now unplug ur phone. And then if ur phone is not powered on, just powered on.
4. Connect ur phone to the the PC via USB.
*NOTE - check if ur phone if is connected to the PC in real. If is not, try these simple steps - u may did that - unplug the phone and did restarts on it. After this if it can not connected again to the PC, do this on PC - right click on "My computer"", then click on "manage" -> device manager->universal serial bus controllers, and then uninstall "composite USB". Restart the PC. Wait until Windows install the drivers in fresh and then plug in ur phone to the USB.
5. On ur phone tap Settings->Applications->Development->tap "USB debugging mode" and pres OK, also check "Stay awake" is on. The first one is necessary and the second one is to not sleep ur screen til the process.
6. Copy .zip file named Update.zip to ur sd card.
7. Copy the folder named "root_xt320". (u must have it if u did this tutorial step-by-step) to the C: of ur PC.
8. On ur Windows PC, go to Start menu, and type cmd. It will prompt to u, the windows command window.
*note if u don`t know what is cmd, and how to use it find any tutorial on the net.
9. On cmd prompt window, navigate to ur PC C: , usually by typing twice the command - cd.. Anyway u need to navigate by cmd window to the folder named root_xt320. Once u r in the C: dir u must type in the cmd prompt the comand - cd root_xt320. Once u are in the root_xt320 on the cmd u must did the following steps - 10 and 11.
10. On cmd, type - adb reboot-bootloader and wait until ur phone load in fastboot mode.
11. After this, on cmd, type - fastboot boot recovery.img
*NOTE - if u dont understand this, go and watch that video from 24 minute to 27 minute.
12. Now, on ur phone screen must appear the menu, which offer u some option. U must navigate up or down, by presing VOl- or VOL+ buttons on the phone.
13. Navigate to "install zip from sdcard" and install it, probably the button for execute will be the POWER button
14.Then u will see menu with "choose zip from sd card". select it and execute by pressing POWER button
15. Navigate to "yes instal update.zip" and execute.
16. Navigate to "Yes - install fix root" and execute.
17. Use back button on ur phone, navigate to "reboot", and execute.
18. Now ur phone is rooted, go to the apps, u must see a new app, named "Superuser".
*NOTE - if u don`t understand how to do it, read this post.
19. Unplug the phone from USB.
20. Now, in case u r removed ur SIM in the first step, just install it on the Phone.
Now connect ur phone, start via USB.
Now on ur PC, start MiniTool Partition Wizard program. Go in youtube and find out tutorial, how this progam work The important thing u must know is what is the version of android ROM on ur phone. U can check your ROM version, by tap Settings->About the phone and scroll down to "software version". Then go to wiki here to understand what is the name or ur version. If is it a Gingerbread u must did the ext part via MiniTool Partition Wizard on ur sd card as ext4. For other android version, i don`t guaranteed.
And after u made a ext partition on ur sd card u can proceed bellow.
II. THE AFTER
*This is the most tricky part for me. And what we must to do:
After the successful root in the previous section, the first u need to do is:
1. Connect the phone through Wi-fi. Log on Google Play store, and find and install the app, named "link2sd". After its done, turn off the Wi-fi connection.
2. Start Link2sd, follow instructions - if all is fine it will do reboot on ur phone.
*If u can`t understand this, find a tutorials how to use Link2sd on the web.
2.2. After the restart, navigate on ur android and start Link2sd again.
3. Now start WI-fi and go in Google Play store, and wait. Wait until u received a huge Google Play services app on ur internal memory.
3.1. Now turn off ur WI-fi, and on ur phone tap Settins->Manage Apps->Google Play services and then uninstall it.
3.2.And it must not appear on ur internal, or even on ur phone, anymore. But u can still use Google play store without problems.
3.3. Now u can turn on ur WI-fi.
4. Now using Link2sd, we need to linked the apps to the sd. On Link2sd menus, use to show apps in internal memory first, and then apps with largest size. This will show the largest apps using internal memory, and we need to move them.
5. So, now tap on the desired app, and then tap on "link to SD card". Probably u will get the window which tell u the process is failed, but don`t worry. Now tap -> previous, and using Link2sd options, find out the section called "Clean up the 2nd partition", tap on and clear it.
Now u must repeat this for every app that u want to link to sd card.
After u finish with all ur desired apps, reboot the phone.
The apps, will still use some part of the internal memory, but a very less than before.
Personally, after i did and all above, i got used internal memory, just about 25MB.,
6. I advice to non check auto link new apps in ur Link2sd Settings. Just after download a new app,check if it can be moved to sd card. If can not, link it to sd as it is described in point 5. above.
7. After all u can move to sd card the our main app Link2sd, just using ->Manage apps->Link2sd->Move to SD.
And as final, after i did my guide, i installed, uninstalled new apps, did many restarts of the phone, and it still to be stable and apps working fine. And Google play services don`t appear anymore, but u can continue use Google Play store to install and use apps.
8. Now u can start to freeze or uninstall apps, using Link2sd at ur own risc.
IV. IN ADDITION
That i did not figure out it is how to and if it`s possible to link the apps cache to the sd card.
----------------------------------
[THE SHORT GUIDE]
I. THE PRE - things u need to do before start the rooting process.
*Make a backup of your Phone, or u can find your firmware ROM here. *
II. THE ROOT
1. Remove the SIM card. -
2. To get new .SBF with fastboot for ur original ROM use the method posted by user @rootdefyxt320 in this tread.
3. Connect ur phone to the the PC via USB.
4. On ur phone tap Settings->Applications->Development->tap "USB debugging mode" and pres OK, also check "Stay awake" is on.
5. Copy .zip file named Update.zip from folder named root_xt320 to ur sd card.
6. Copy the folder named "root_xt320" to the C: of ur PC.
7. On ur Windows PC, start CMD console
8. Using CMD, navigate to root_xt320 foldel
10. On cmd, type - adb reboot-bootloader and wait until ur phone load in fastboot mode.
11. After this, on cmd, type - fastboot boot recovery.img
12. Now, on ur phone screen must appear the menu, which offer u some option. U must navigate up or down, by presing VOl- or VOL+ buttons on the phone.
13. Navigate to "install zip from sdcard" and install it, probably the button for execute will be the POWER button
14.Then u will see menu with "choose zip from sd card". select it and execute by pressing POWER button
15. Navigate to "yes instal update.zip" and execute.
16. Navigate to "Yes - install fix root" and execute.
17. Use back button on ur phone, navigate to "reboot", and execute.
18. Now ur phone is rooted, go to the apps, u must see a new app, named "Superuser".
19. Unplug the phone from USB.
20. Now, in case u r removed ur SIM in the first step, just install it on the Phone.
Now connect ur phone, start via USB.
Now on ur PC, start MiniTool Partition Wizard program. If is it a Gingerbread u must did the ext part via MiniTool Partition Wizard on ur sd card as ext4. For other android version, check on the next in what ext must be formated.
And after u made a ext partition on ur sd card u can proceed bellow.
II. THE AFTER
1. Connect the phone through Wi-fi. Log on Google Play store, and find and install the app, named "link2sd". After its done, turn off the Wi-fi connection.
2. Start Link2sd, follow instructions - if all is fine it will do reboot on ur phone.
2.2. After the restart, navigate on ur android and start Link2sd again.
3. Now start WI-fi and go in Google Play store, and wait. Wait until u received a huge Google Play services app on ur internal memory.
3.1. Now turn off ur WI-fi, and on ur phone tap Settins->Manage Apps->Google Play services and then uninstall it.
3.2.And it must not appear on ur internal, or even on ur phone, anymore. But u can still use Google play store without problems.
3.3. Now u can turn on ur WI-fi.
4. Now using Link2sd, we need to linked the apps to the sd. On Link2sd menus, use to show apps in internal memory first, and then apps with largest size. This will show the largest apps using internal memory, and we need to move them.
5. So, now tap on the desired app, and then tap on "link to SD card". Probably u will get the window which tell u the process is failed, but don`t worry. Now tap -> previous, and using Link2sd options, find out the section called "Clean up the 2nd partition", tap on and clear it.
Now u must repeat this for every app that u want to link to sd card.
After u finish with all ur desired apps, reboot the phone.
The apps, will still use some part of the internal memory, but a very less than before.
Personally, after i did and all above, i got used internal memory, just about 25MB.,
6. After all u can move to sd card the our main app Link2sd, just using ->Manage apps->Link2sd->Move to SD.

Framaroot doesn't work? Motorola Defy Mini is in the Supported devices list.

androidtester80 said:
Framaroot doesn't work? Motorola Defy Mini is in the Supported devices list.
Click to expand...
Click to collapse
I don`t know, i don`t tested that. I rooted my phone sucefully and aps and phone still working without problem. So don`t need to use other methods atm

can't move apps: what i did wrong?
hi!
this is a very nice tutorial, thank you. i done root as you described, but something went south.
root is ok, superuser apk is at its place, but i can't get rid of old apps.
when i use link2sd, i keep getting errors. tried several options of creating partition on sd card, ext4, fat32, no good. i tried to use app master, that was working nicely on my prestigio pap4044duo. app master is working fine, system is notifying about root access granted, everything cool but one small thing. after the process of moving system app (i.e. facebook or office) is finished, and app master shows no errors, that dear system app is still there like nothing happened.
any ideas?
tnx

Related

[Guide] Complete Newbie Guide to Root & Install a Custom Rom [Updated 26/08]

This is aimed at new "rooters". The process is incredibly easy.
I also take no responsibility if you mess up somehow, and this is for GSM Hero's NOT Sprint Hero CDMA users.
In order to create this guide I downgraded my phone to RUU Orange UK 2.73.61.66 (i.e. unrooted) then updated to the pre-2.1 release from Orange and then updated to the final 2.1 release from Orange. I then used Universal Androot to gain root access and from there install a custom recovery.
I have now also included a link to z4root as an alternative.
Here is a link to my backup guide but please be aware that most of it requires root access.
Prelude:
Install HTC Sync from here
Download Universal Androot
Download z4root
Download Root Checker - only if you need to
Download AmonRA Recovery v1.7.0.1.img - easier if you rename this "recovery.img" when it is on your sdcard
Place both downloaded files on your SD Card
Root & Recovery
1. Download and install Astro File Manager from the Market (or use any other file management program of your choice)
2. Open Astro and find and install Universal Androot (or if that doesn't work try z4root) from your sdcard:
Select UniversalAndroot.apk > Open App Manager > Install > Settings> [tick] Unknown Sources > OK > Back > Select UniversalAndroot.apk > Open App Manager > Install > Install > Open
3. In the app and choose the correct version from the dropdown box:
Superuser for Android 2.0~2.2 - if you have updated your phone recently
Superuser for Android 1.5~1.6 - if you have refused updates recently or your country/provider hasn't released one yet
Then choose: "Root "
Wait until it says "Woot ! Your device is rooted !" and exit the program.
4. Download and install Android Terminal Emulator from the Market (use Better Terminal instead if this one doesn't work)
5. Run "Terminal Emulator". Type (press and hold menu to get the keyboard up) in the following:
su (press enter and wait for the "Super User Request Prompt". Choose "Allow" and make sure its ticked to Allow every time.)
flash_image recovery /sdcard/recovery.img (press enter - make sure this is typed exactly as seen)
N.B. If you have issues here, see * notes below for more assistance
6. Turn off your phone and press Home + Power to start it up again. This should boot into recovery mode.
Install Your Custom Rom
Note: This part of the guide can be repeated with as many different rom's as you like. You do not have to repeat the previous section once you have a recovery image installed.
1. Download a Custom ROM from here to your computer.
2. Make sure your phone is in recovery mode (Home + Power)
Plug your phone into your computer and select "USB-MS toggle" in recovery
Place the Custom ROM on your SD card in the main directory and press Home when it has finished copying over
3. Select Backup/Restore > Nand backup > confirm with Home > Wait
(or Nand + Ext if you have A2SD setup)
4. Press back then select Wipe from the main menu, then select:
Wipe data/factory reset > Home
Wipe cache > Home
Wipe Dalvik-cache > Home
Wipe SD:ext partition > Home
Press back button
Select Flash Zip from SD Card
Select the file
Press Home to confirm
Note: Ignore any "errors", they are normal and usually mean you're not using that feature.
5. Once it is done, select Reboot and you will boot into the new Custom ROM.
Updating your Radio
Note: The radio deals with your signal levels and connectivity.
1. Download the latest radio from the following page
N.B. Radio's are not region specific! Just get the latest
2. Mount your SD Card so your computer can read it and place the downloaded file in the main directory
3. Turn off your phone and boot into the recovery screen (holding Home + Power)
4. Choose:
Flash Zip from SD Card
Pick the radio.zip file and press Home to confirm
Wait
Your phone will reboot a couple of times but when you're back on the Recovery Screen just press reboot system now and it will complete the install and put you back into your custom rom.
DO NOT PULL THE BATTERY OUT, THIS WILL BRICK YOUR HANDSET.
5. When this process has completed reboot the phone and you should have the new radio. This can be checked in Settings > About Phone
*Useful Information!!
42turkeys said:
Tested this on 1.5 the other day, nice one BtDaG
For those of you having problems flashing the recovery, try entering this before the flash_image command:
Code:
rm /data/local/rights/mid.txt
ln -s /dev/mtd/mtd1 /data/local/rights/mid.txt
(btw, ROM Manager has an option to flash Amon_RA at the bottom )
Click to expand...
Click to collapse
** Missing flash_image - confirmed to work by another user, please inform if different
Download the flash_image.zip and unzip to your PC folder. Setup ADB. Place the recovery_image .zip in a folder called recovery on your computers C: drive. Then you will be able to run the following adb commands below from a cmd prompt on your computer:
cd c:\recovery
this will ensure you are in the correct folder
adb root
This will start ADB as root, or notify if it is already running as root.
adb remount
This will mount the system partition (/system) as writable, allowing the following
adb push flash_image /system/bin
This will send the flash_image script into the /system/bin, so we can use it from within the shell
adb shell chmod 0755 /system/bin/flash_image
Finally, change the permissions of the script to allow it to perform the desired action. Now that the script is installed, we are ready to proceed with flashing the custom recovery, saved on the root of the SD card earlier:
adb shell flash_image recovery /sdcard/recovery.img
this will install the the recovery - now continue the process where you left off
Click to expand...
Click to collapse
*** solution 3
brisuth said:
A big thankyou to duck0 for identifying the problem and botoo for getting me to a happy conclusion with the correct commands
SOLUTION IS HERE USING Console mode from windows using ADB USB DEBUGGING HAS TO BE ENABLED WITH HERO CONNECTED TO PC THEN TYPE THE FOLLOWING
THEN ENTER AFTER EACH COMMAND
anyone needing help setting up adb see this link http://forum.xda-developers.com/showthread.php?t=757233
adb shell
su
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
rm /system/etc/install-recovery.sh
Thats it all done next step
INSTALL ROM MANAGER FROM MARKET IT IS FREE
open it and sellect flash alternate recovery image from the bottom, you can use the clockwork recovery but it is not compattable with all roms.
once done turn phone off, boot into recovery home + power choose to exit recovery with reboot shut down once again and if you can enter recovery then everything is sweet.
Click to expand...
Click to collapse
Setup Apps2SD
ONLY RECOMMENDED ON CLASS 4+ SD CARDS. Don't bother if you don't know what this is . GIYF.
Do this process after doing everything else! So make sure you have a working custom rom installed which supports Apps2SD. This is designed for VillainROM which doesn't use a swap, if your ROM does support swap ask for a recommended amount. Also note that the ext2 partition will be unreadable from windows or through android os.
1. Backup your SD card to your computer (very important as this process will wipe all the data on it)
2. Restart your phone into recovery mode (Home + Power)
3. Select:
Partition sdcard
Partition SD
Press Home
Swap-size = 0 MB
Ext2-size = 512 MB (recommended)
FAT32-size = Remainder
Press Home
4. Once complete Reboot system now and wait! This can take 20 minutes or so to complete, so just keep waiting!
DO NOT USE EXT3 or EXT4 partitions. They will just wear out your sd card quicker. They are designed for large files systems (i.e. 50GB+) with full operating systems running on them! The only benefit they bring is indexing (which on a 512MB partition is worthless). (Optional - before reboot) - Under partition sdcard you can convert the ext2 partition to ext3 - "SD:ext2 to ext3" - however this isn't recommended as it will wear out your sd card quicker. There is also often support for ext4 so you can do "SD:ext3 to ext4" after the first one too. Though again this will typically just wear out your SD faster without providing any speed benefits. See note above.
Code:
[B]OLD PROCESS BACKED UP JUST IN CASE. PLEASE DO NOT FOLLOW THIS SECTION OF THE GUIDE![/B]
Largely based upon the Unlockr guides, so thank you Unlockr!
Please do NOT be mislead. This is NOT a quick process, though the time has been reduced significantly if you don't need the goldcard method.
There is no "one-click" version or "quick-install".
You should set aside at least an hour for this process and preferably read through the process once before actually attempting it.
[B]Please make a quick post with your experiences, including your brand of phone and location.
Please check the FaQ first before asking questions :)[/B]
[COLOR=DarkGreen][SIZE=3][U]Contents[/U][/SIZE][/COLOR]
[COLOR=DarkRed]Pre: Backup[/COLOR]
[COLOR=Navy]1. Installing a Recovery Image
a. Installing the Correct HTC ROM
2. Loading the Custom ROM
3. Updating your Radio[/COLOR]
[COLOR=DarkOliveGreen]Setup Apps2SD
Check A2SD[/COLOR]
[COLOR=DarkSlateBlue]"GoldCard" Test Procedure
I. Setting up the drivers
II. Create a “GoldCard” from a MicroSD Card
III. Downgrade the Hero using the Goldcard[/COLOR]
[COLOR=DarkGreen]FaQ[/COLOR]
[COLOR=DarkRed][SIZE=3][U]Pre: Backup[/U][/SIZE]
1. Backup contacts etc with HTC Sync.
2. Backup your SD Card or use a spare
3. Backup SMS Messages with SMS Backup & Recovery[/COLOR]
[COLOR=Navy][SIZE=3][U]1. Installing a Recovery Image[/U][/SIZE]
1. On your phone, go to Settings > Applications - and make sure "Unknown Source" is ticked.
2. On your phone, go to Settings > SD card and phone storage - click Unmount SD card.
3. Then click Format SD card.
4. Plug the phone into the computer via USB, then pull down the notification bar and click on the SD card notification. Then click mount.
5. Download this APK and recovery image and save it to your computer:
[URL]http://zenthought.org/content/project/flashrec[/URL] - FlashRec.apk
[URL]http://forum.xda-developers.com/showthread.php?t=561124[/URL] - Amon_Ra’s Hero Recovery Image
6. Copy them both to your SD card (do NOT put them inside any folders on the SD card, just put them on the SD card itself).
7. Unplug the phone from the computer once they are downloaded to the SD card.
8. Go to the Market and download ASTRO File Manager or any file manager program if you do not already have one.
9. Open the file manager and find the FlashRec apk file and click it and choose open app manager and then install it.
10. When it is installed click Open. Click on Backup Recovery Image and wait for it to finish. If you get "backup failed" response see the text on the right for more details, if the backup is a success carry on to step 11.
[RIGHT][SIZE=1][U]a. Installing the correct HTC ROM[/U]
Orange UK Users - Please downgrade your ROM version to [URL="http://www.htc.com/uk/SupportViewNews.aspx?dl_id=675&news_id=261"]2.73.61.5[/URL]
Generic Hero Users - Please downgrade to [URL="http://x7.to/6jexri"]2.73.405.5[/URL], or follow the goldcard method if this doesn't work
T-Mobile UK Users – Please follow the "Goldcard" method below
All Other Users - Please follow the "Goldcard" method below[/SIZE][/RIGHT]
11. Once done, click on the empty text box in the FlashRec program and type:
/sdcard/recovery-RA-hero-v1.6.2.img
(replace exact name as new versions come out)
Then click on the Flash Recovery Image button and wait for it to finish.
[SIZE=3][U]2. Loading the Custom ROM[/U][/SIZE]
N.B. This part of the guide can be repeated with as many different rom's as you like. You do not have to repeat the previous sections once you have a recovery image installed.
1. Download a Custom ROM from [URL]http://forum.xda-developers.com/forumdisplay.php?f=512[/URL] to your computer.
2. Plug in your phone and pull down the Notification bar when the SD notification pops up.
3. Click on the notification and select Mount.
4. Open the SD Card fonder on your computer.
5. Copy the Custom ROM from your computer to your SD Card, do NOT change it, extract the files or put it in any folders
6. Unplug your phone and turn it off.
7. Turn the phone on by holding down Home and Power till you get to the custom recovery screen.
8. Select Wipe from the menu, then select:
Wipe data/factory Reset
Wipe Dalvik-cache
Wipe SD:ext partition
Press back button
Select Flash Zip from SD Card
Select the file
Click Confirm
N.B. Ignore any "errors", they are normal and usually mean you're not using that feature.
9. Once it is done, select Reboot and you will boot into the OS. Once you are loaded in make sure you format your SD card once more through the settings menu and then reboot the phone one last time. This will ensure you get the correct apps.[/COLOR]
[COLOR=Navy][SIZE=3][U]III. Updating your Radio[/U][/SIZE]
[B]N.B. People have been reporting problems with this part of the guide, try it at your own risk. It is not required to be on the latest radio when using a Custom ROM, however it is usually recommended! The radio deals with your signal levels, I found it to increase my signal from a maximum of 2 bars to full. It is likely to help if you travel, but if you are happy with your signal and tend to stay in the same place it may not be worth it.
Be aware that if this doesn't work it can potentially brick you phone... though I've had no reports of that so far. Just people finding it doing different things after it flashes.[/B]
1. Download the latest radio from the following site:
At time of writing that is: [URL="http://www.villainrom.co.uk/radio/Radio_Signed_HERO_63.18.55.06PU_6.35.15.14.zip"]63.18.55.06PU_6.35.15.14[/URL]
[B]N.B. Radio's are not region specific![/B]
2. Mount your SD Card so your computer can read it and place the downloaded file in the main directory
3. Turn off your phone and boot into the recovery screen (holding Home + Power)
4. Choose:
Flash Zip from SD Card
Click Confirm
Reboot system now when prompted
N.B. This can take anywhere between 1 - 10 minutes or maybe even longer in some cases. Do not touch your phone until you either: get back to the recovery screen or your custom rom loads and you see the unlock screen.
DO NOT PULL THE BATTERY OUT, THIS WILL BRICK YOUR HANDSET.
5. When this process has completed reboot the phone and you should have the new radio. This can be checked in Settings > About Phone > Software Information > Baseband Version[/COLOR]
[COLOR=DarkOliveGreen][U][SIZE=3]Check A2SD[/SIZE][/U]
Please assume it is automatically working unless you can load applications without your SD card inserted. However, here is the process for those who are pedantic about these things. Many thanks to VillainROM Wiki for this process.
1. Download check.zip from the bottom of this guide.
2. Extract check.sh
3. Download GScript Lite from the market
4. Place check.sh on your SD card in a folder named gscript
5. Open GScript and press:
Menu
Add Script
Uncheck "needs su"
Load File
Select check.su
Save
6. Then click check from the main screen and you will get a readout of whether it is enabled or not.[/COLOR]
[COLOR=DarkSlateBlue][SIZE=3][U][B]"GoldCard" Test Procedure[/B][/U][/SIZE]
Please comment on whether this procedure works, it is untested. Thanks to [URL="http://www.villainrom.co.uk/viewtopic.php?f=46&t=1735"]ante0's guide[/URL] for some details used.
[SIZE=3][U]I. Setting up drivers etc[/U][/SIZE]
1. Download the latest HTC Sync from [URL="http://www.htc.com/www/SupportViewNews.aspx?dl_id=933&news_id=631"]here[/URL] and the latest SDK from [URL="http://developer.android.com/sdk/index.html"]here[/URL]
2. Install HTC Sync & extract the Android SDK .zip file to C:\ (may help to re-name the folder to a shorter name, in this tutorial it will be C:\android\ )
3. Click on your Windows Start menu and right click on "Computer" > Properties > Advanced System Settings > Environment Variables
Find "Path" under "System Variables" and edit it. Add the following to the end of the text:
;C:\android\tools
4. Restart your computer.
On your phone, click Settings > Applications > Development and make sure USB Debugging is on.
When back at your desktop plug then phone in and wait for it to install the correct drivers, this should be done automatically on the latest version of HTC Sync and adb should be enabled.
5. Type the following into the command prompt window (Start > Search > "cmd") and enter the following and press enter:
adb devices
You should see a serial number pop up and look like:
000000000000 device
It’s the serial number of your phone. This means the drivers are working in normal boot mode. Next we need to check them in fastboot mode (thanks to janhol for helping with this next part)
6. Turn off your phone and load into fastboot by holding the Back button and pressing Power with the hero plugged into the computer
7. "Start" > Right Click "Computer" > "Manage" > "Device Manager"
8. Check that the "ADB Interface" reads "My Hero", not "Android bootloader drivers" or anything else.
If it does then:
Right click "Android bootloader drivers" > "Update Driver Software" > "Browse my computer..." > "Let me pick from..." > "Have Disk..." > "Browse" > "C:\Program Files (x86)\HTC\HTC Driver\Driver Files\Win7_x64" > "androidusb.inf"
Once selected click "OK".
"My HTC" should show in the list of "compatible hardware" now, so select that and click "Next" to install the driver. Switch off the phone (may have to pull the battery).
[SIZE=3][U]II. Create a “GoldCard” from a MicroSD Card[/U][/SIZE]
(Please keep in mind that some memory cards don’t work for this process)
1. Put the memory card you want to use for the GoldCard into your phone, make sure all the data is backed up before proceeding as it will be formatted.
2. With the memory card in your phone, and not connected to the PC, click on:
Settings > SD and Phone storage > Unmount SD Card
Once it unmounts, click Format SD Card.
3. On your phone, click:
Settings > Applications > Development and make sure USB Debugging is on.
4. Return to the Command Prompt from earlier after re-plugging in your Hero. Then type the following with hitting enter at the end of each line:
adb shell
cat /sys/class/mmc_host/mmc1/mmc1:*/cid
5. A code will display, write the code down into a notepad document or similar (MAKE SURE TO WRITE IT DOWN EXACTLY!)
6. Go to this site: [URL]http://hexrev.soaa.me/[/URL] then put in your code you just wrote down into the text box and click submit. It will generate the code reversed and replace the first two digits with zeros automatically. Copy this.
7. Then go to [URL]http://psas.revskills.de/?q=goldcard[/URL] and Paste your CID into the box and fill in the other details. You'll be e-mailed the goldcard. Save the goldcard image to disk.
8. Now go to [URL]http://download.cnet.com/HxD-Hex-Editor/3000-2352-10891068.html?part=dl-HxDHexEdi&subj=uo&tag=button[/URL] to download the HxD Hex Editor. Install it to your computer.
9. Mount your SD card on your phone so that it shows up on your computer as "Removable Disk" - Pull down the notification bar on the phone and select Mount CD Card.
10. Open the Hex Editor (Run as Administrator if you're in Vista or Windows 7) and click on the Extra menu > Open Disk. Under "Physical Disk" select "Removable Disk". Make sure to UNcheck “Open as ReadOnly”. Click OK.
11. Go to the Extra menu again and click Open Disk Image. Open up the goldcard.img that you saved from your email. Press OK when prompted for Sector Size 512 (Hard Disks/Floppy Disks). You should now have two tabs, one is the SD card (Removable Disk) and the other is the goldcard.img.
12. Click on the Goldcard.img tab and press Ctrl + A (select all) Then Ctrl + C (copy).
13. Click on the Removable Disk tab (Your SD Card) and select the complete lines from 00000000 to 00000170 then press Ctrl + V (paste).
14. Click on File then click Save.
15. Close the Hex Editor.
16. Reboot the phone.
Try to open the memory card on the computer (i.e. mount the drive), if it lets you, you are all set. If it asks/tells you to reformat the card, then try steps 13 – 19 again. If it gives you the same error again, then try a different memory card. You can confirm that it has worked by opening the Removable Disk in the hex editor again and making sure the code you pasted in has stayed but this shouldn't be necessary.
[SIZE=3][U]III. Downgrade the Hero using the Goldcard[/U][/SIZE]
1. With your phone plugged in, pull down the notification bar on the phone and select HTC Sync. Make sure it connects to HTC Sync on the computer (not sure if this is necessary anymore).
2. Download this generic HTC Hero RUU
Hero RUU -
[URL="http://x7.to/6jexri"]2.73.405.5[/URL]
[URL="ftp://xda:[email protected]/Hero/Official-ROMs/RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver.exe"]2.73.405.5[/URL] (alternative)
3. Double click the RUU exe you downloaded while the phone is plugged in with the GoldCard in it and follow the on screen procedure. This will install the old generic Hero rom on your phone, this is to allow you to install a recovery image. Reboot and fill in as few details as possible as these will be overwritten soon.
4. Now you have finished this procedure start from the beginning again.[/COLOR]
Website: [URL]http://rootmydroid.co.uk/[/URL]
Other Guides:
[URL="http://forum.xda-developers.com/showthread.php?t=669754"]How to Backup your Phone Between Wipes[/URL]
Even older process - ignore
[COLOR=DarkOrange][SIZE=3][U][B]Old "GoldCard" Procedure[/B][/U][/SIZE]
[SIZE=3][U]I. Setting up the SDK[/U][/SIZE]
1. Download the Latest Android SDK from Google
Android SDK - [URL]http://developer.android.com/sdk/index.html[/URL]
(currently - android-sdk_r06-windows.zip) but get the latest
2. Extract the Android SDK .Zip file to C:\ (may help to re-name the folder to a shorter name, in this tutorial it will be C:\android\ )
3. Run SDK Setup.exe
4. Click "Settings" and check the "Force [URL]https://.[/URL].. sources ..." option
5. Click "Available Packages" and download the "USB Driver Package"
6. On your phone, click Settings > Applications > Development and make sure USB Debugging is on.
7. Plug your phone into your computer via USB cable.
8. Go into device manager: Start --> Search for "device manager"
9. Here we are checking the driver which is installed for your Hero, you may see either of the following scenarios:
Other Devices > ADB
or
Android Phone > My HTC
Either way you should do the following:
Right Click > Update Driver > Browse > C:\android\usb_driver > Next and it should install "Android Composite ADB Interface"
10. Type the following into the command prompt window (Start > Search > "cmd") and enter the following hitting enter at the end of every line:
cd c:\android\tools\
adb devices
You should see a serial number pop up, it’s the serial number of your phone. This means you are all set.
If you do NOT see a serial number, then we need to reinstall the drivers.....
end cut off due to size limits
nice
i`m sure it will help alot of people out, it took me a whole day to sort mine out.
cheers
nice one. you've just summarised my last sunday afternoon. great to have this all in one place. needs to be a sticky imho.
Nice Tutorial... Please give me the SPL version and Radio Version of the Hero that this worked on.
brettf said:
Nice Tutorial... Please give me the SPL version and Radio Version of the Hero that this worked on.
Click to expand...
Click to collapse
The radio was different on both the devices tested and I am fairly certain it has no effect on whether you can do this procedure or not. They are now both flashed with the latest radio.
I have no record of the "SPL versions". Again I'm not really sure how this is relevant?
This guide assumes the user has no knowledge of these things and have made no previous modifications to their phone (besides standard updates)
You'll have to bear with me as I'm pretty new to all this as well. The guide was made because I found the others extremely difficult to follow. I'm glad to see by the other posts that I am not the only one
Im doing this now, my Hero was delivered this morning and i was looking for in depth instructions so I cant go wrong. This looks bang on,... Just about to start section II (creating Goldcard) but thought i'd better put up some thanx 1st.
Wish me luck, i'm assuming it'l all go ok, i'l post again once its done.
Thanks again BTDAG.
Peace
Guys I'm stuck,... Section II, part 10, Mount your SD card on your phone so that it shows up on your computer as "Removable Disk".
Through the setting on my phone I can only select "UNMOUNT SD CARD"!!! Arggghhhh!!!
Can anyone help please?
AHA,... That'l teach me to not read the whole thing 1st!!!!!!
In section III, part 3,... You have put "pull down the notification bar and click on the SD card notification. Then click mount." .... Maybe edit the 1st post and put it in (for the idiots like me).
Thanks though.
ddotpatel said:
AHA,... That'l teach me to not read the whole thing 1st!!!!!!
In section III, part 3,... You have put "pull down the notification bar and click on the SD card notification. Then click mount." .... Maybe edit the 1st post and put it in (for the idiots like me).
Thanks though.
Click to expand...
Click to collapse
I had no idea that was in the wrong order, thanks for pointing it out. I'll edit that now!
I had to figure most of this out as I was going so i quickly forgot what I did differently. The more people point out the better the guide will get! XD
Great guide.
Add it as a Wiki... it will not get a sticky!
nprussell said:
Great guide.
Add it as a Wiki... it will not get a sticky!
Click to expand...
Click to collapse
Thanks. I love your ROM's and can't wait for the next Villain release.
Already done as I figured as much.
Oh my god!! Im was having an absolute mare!!!!!
Was trying to downgrade the rom,... but HTC Sync would not connect (Part III, no 3), everything else was ok... 1st i ignored it and just carried on, started flashing, phone went into that 'Fastboot' bit where there are the Android thingies on skateboards, but then failed, came up with an error message, then froze. I had to take the battery out!!!
Started up fine though.
So i gave up for a while to stop me from throwing my laptop against the wall!!!
But the missus has just got home so im booting up her XP lappy, thought it might be cos im using Win7 64bit. So here goes again!!!!
question:
i Would like to install a custom Rom on Hero
i have two micro SD cards ( 2GB i 8GB )
1. I would like to use 8GB card for apps and music...
Do I have to create a "Gold Card" on the 8GB card, or can I use the 2GB card to creat "Gold Card"?
2. Durin the installation of a Custom Rom, do I have to put in the phone the "Gold Card" (2GB), or can I put the 8GB card?
And
3. if I want to "roll back" the original ROM, can I do that just simpley by puting in the "Gold Card" and rolling back te rom saved on Gold Card?
THX
(sorry for my English)
ddotpatel said:
Oh my god!! Im was having an absolute mare!!!!!
Was trying to downgrade the rom,... but HTC Sync would not connect (Part III, no 3), everything else was ok... 1st i ignored it and just carried on, started flashing, phone went into that 'Fastboot' bit where there are the Android thingies on skateboards, but then failed, came up with an error message, then froze. I had to take the battery out!!!
Started up fine though.
So i gave up for a while to stop me from throwing my laptop against the wall!!!
But the missus has just got home so im booting up her XP lappy, thought it might be cos im using Win7 64bit. So here goes again!!!!
Click to expand...
Click to collapse
O Windows 7 64-bit needs different drivers. I have attached them here to the original post. I am also on 64-bit but completely forgot about those hassles. Thanks for the reminder.
ico86 said:
question:
i Would like to install a custom Rom on Hero
i have two micro SD cards ( 2GB i 8GB )
1. I would like to use 8GB card for apps and music...
Do I have to create a "Gold Card" on the 8GB card, or can I use the 2GB card to creat "Gold Card"?
2. Durin the installation of a Custom Rom, do I have to put in the phone the "Gold Card" (2GB), or can I put the 8GB card?
And
3. if I want to "roll back" the original ROM, can I do that just simpley by puting in the "Gold Card" and rolling back te rom saved on Gold Card?
THX
(sorry for my English)
Click to expand...
Click to collapse
1. The gold card is only used to allow you to downgrade (as far as i'm aware) so you can use the 2GB as gold card and 8 GB for music but... (see next)
2. I have no idea, probably best to leave the gold card in and replace it when the ROM is flashed but I don't think it is mandatory. I do however, have no idea how long it is needed for. Just make sure you format the card you're going to use through the phone when you insert it for the first time.
3. If you want to go back to your Orange or T-Mobile ROM from HTC all you have to do is use the latest .exe you get from HTC's support website. Once again it is probably best to format your SD card after first boot.
The only thing that's stopping me from trying this out is the goldcard thing - I really don't want to format my 8Gb card. I could use the 2Gb one from my old G1, but it's going on eBay in the next week so if I needed the exact same goldcard at some point in the future then I'd be stuffed.
I suppose that I'll just have to live without the glory of being rooted for now!
thedoccwc said:
The only thing that's stopping me from trying this out is the goldcard thing - I really don't want to format my 8Gb card. I could use the 2Gb one from my old G1, but it's going on eBay in the next week so if I needed the exact same goldcard at some point in the future then I'd be stuffed.
I suppose that I'll just have to live without the glory of being rooted for now!
Click to expand...
Click to collapse
You could backup the data on the 8Gb card (i.e. copy and paste it to a folder on your pc) then format it and restore any music / pictures etc back to it. Just avoid replacing any old settings files specifically related to the HTC widgets, that is where problems occur.
O i'm also fairly certain you won't need the gold card again unless you go back to the official HTC releases and need to downgrade again and there is no harm to making your 8GB a gold card in the future as you can still back-up and restore the data you wish to keep on it.
wow nice guide, bookmarked! i spent ages looking for all the info about a month ago.
ive decided that i only really need to install a custom ROM when htc decide not to offer official updates anymore.
btdag said:
You could backup the data on the 8Gb card (i.e. copy and paste it to a folder on your pc) then format it and restore any music / pictures etc back to it. Just avoid replacing any old settings files specifically related to the HTC widgets, that is where problems occur.
O i'm also fairly certain you won't need the gold card again unless you go back to the official HTC releases and need to downgrade again and there is no harm to making your 8GB a gold card in the future as you can still back-up and restore the data you wish to keep on it.
Click to expand...
Click to collapse
No, no, no, you're meant to say something like 'ahh, probably for the best that you don't bother for now then'. The slightest pro-rooting comment is going to have me going for it! Still, it is character building, I suppose. And I did feel much better for having done it to my G1...but can I be bothered to do it at this time of night?!?!
mobydeek said:
wow nice guide, bookmarked! i spent ages looking for all the info about a month ago.
ive decided that i only really need to install a custom ROM when htc decide not to offer official updates anymore.
Click to expand...
Click to collapse
but your missing out on so much now

[Q] I need some help pls (Htc Tytn II)

Hello guys. I've been trying to instal android on htc tytn II and i can't make it.
i am using the tutorial on sourceforge but i can't do it
at step 16...what should i put at working dir (C) ?
How should i put the fstab at step 11 and 22?
I've searched for answers on many posts but i still can't manage to make it work.
Can somebody please help me?
Also....is there another way to install android? usb mode or something?
blacki3 said:
Hello guys. I've been trying to instal android on htc tytn II and i can't make it.
i am using the tutorial on sourceforge but i can't do it
at step 16...what should i put at working dir (C) ?
How should i put the fstab at step 11 and 22?
I've searched for answers on many posts but i still can't manage to make it work.
Can somebody please help me?
Click to expand...
Click to collapse
i think lets take a look at the picture again :
-[attached]-
for fstab, i leave it "auto", and now incubus work great on my kaiser.
just make a new folder on ur storage(D), or system(C), rename it to "build" (just example, bcos i rename it like that), and put all of ur work an there.
follow all the steps, and ur kaiser will turn to android. if u need more help, just ask me, or the other mate.
hope me answer can help u
i was wondering if i could find somewhere the files i need, so i can just put them on the phone and install
blacki3 said:
i was wondering if i could find somewhere the files i need, so i can just put them on the phone and install
Click to expand...
Click to collapse
u can find all the files u need inside the forum. just try to explore more deep
try to combine all the tutorial how to install android on ur kaiser, it will be great.
start with this : http://forum.xda-developers.com/showthread.php?t=433835
( [Resources] Flashing Your First Kaiser Rom (For Noobs) )
try to follow all the tutorial, but at the number 5 (Download and Flash your Prefered Rom) change ur rom into android rom.
and continue with this : http://forum.xda-developers.com/showthread.php?t=680518
( How to replace Windows Mobile with Android (Guide) )
for me its not a complete guide to install android on ur kaiser, but it just the simple guide.
dont forget to read this note :
Code:
Originally Posted by zenity
If you are experienced at flashing Winmo using KaiserCustomRuu,exe through activesync, then you can do the same with the KAISimg.nbh, just rename it to RUU_Signed.nbh and copy it to a folder on the pc along with Kaisercustomruu.exe, flash as you would with winmo.
(do this thing if u find a problem when u try to install the kernel from SD card)
and then, u can combine the guide/tutorial with this : http://sourceforge.net/apps/trac/androidhtc/wiki/HowToInstallWithAtoolsNand
just read carefully 1st. check all the step. read again, and check again. trial eror.
ps from me : practice make perfect
for the other mate, just correct me if im wrong.
hope my reply can help u.
That are the ones that i was following when i tried to install windows. But i didn't work. Can i just find the files to download from somewhere and just put them on the phone and install? It whould be easier this way
and i have another problem. I have a 2 Gb sd card but i cand only read 1 gb...what could be the problem?
blacki3 said:
That are the ones that i was following when i tried to install windows. But i didn't work. Can i just find the files to download from somewhere and just put them on the phone and install? It whould be easier this way
Click to expand...
Click to collapse
ok, ill give u owl the tools that i use to install android on my kaiser.
try it, but i take no responsibility
1st, download this
Code:
http://bits-=xXx=-hare.com/?f=k1dojuib
(remove the "-=xXx=-") and unzip.
get the hardspl from here : http://forum.xda-developers.com/showthread.php?t=498320
choose the : DaveShaw (.hard)
3.34 Hard SPL nostuckinSPL Force USB
and flash it use active sync. this is the step :
(copy paste from mskip's treat)
Code:
Flashing via ActiveSync with USB Lead
1. Copy JumpSPL1.56-KAIS.exe, JumpSPL1.93-KAIS.exe and JumpSPL1.94-KAIS.exe to your device memory (NOT STORAGE CARD)
2. Pull out the battery and reinsert it (this step IS important) *DONT turn phone back on yet*
3. REMOVE SIM and SD CARDS!!
4. Turn phone back on and let it boot back into your operating system
5. Connect your phone to PC with a USB cable and wait until it syncs with your PC
6. Run File Explorer on your phone, browse to where you copied JumpSPL1.56-KAIS.exe on your device and run it (make sure the USB cable is still connected). If you get a white screen then reset your device and now try JumpSPL1.93 and lastly try JumpSPL1.94 if that one doesnt work.
7. CLick Continue on phone when prompted
8. After a few seconds the tri colour screen will appear on the phone and "USB" will be displayed at the bottom
9. Unplug the usb cable for 30 seconds and then Replug (phone will not re-sync but still says "USB" on the screen)
10. Right click on the Activesync icon in the bottom corner icon on the computer, goto connection settings, deselect "Allow USB connections" and click "ok"
11. Run the KaiserCustomRUU.exe file on your PC thats in the same folder as the HardSPL .nbh file and follow instructions (ticking boxes and clicking Next) *DO NOT re-enable USB Connections in Activesync*
12. Update will goto 100% (should take less than a minute), the Congratulations screen will be displayed on the PC and the phone will restart
13. Unplug USB cable from phone then REPLACE SIM and SD CARDS !!
14. Restart phone
*Remember to re-enable "Allow USB connections" in Activesync connection settings after a successful flash*
just rename the hardspl file to RUU_Signed.nbh and copy it to a folder on the pc along with Kaisercustomruu.exe, and install it.
---------------------
after that, upgrade ur radio. grab it from here : http://forum.xda-developers.com/showthread.php?t=393182
choose : 1.71.09.01
and rename the radio file to RUU_Signed.nbh and copy it to a folder on the pc along with Kaisercustomruu.exe, and install it.
----------------------
next is ur kernel. use Krazy-Killa's Kernel Release - RLS3 (2.6.32.9).
grab it from : http://forum.xda-developers.com/showthread.php?t=980551
download the Attached Files, androidupdate.tar and KAISIMG-PANEL2-320-TILT1-FROYO.NBH.7z
before install the kernel, dont forget to edit the kernel with atool. choose device to kaiser, resolution to 240x320, version to froyo, panel to 1, and keymap to nornal. and save it.
install the kernel. rename the kernel file to RUU_Signed.nbh and copy it to a folder on the pc along with Kaisercustomruu.exe, and install it.
just keep the androidupdate.tar . we will install it after install the ROM.
if u done, u will see the black screen with a lot of text. and tux on the top of ur screen. wait until the text stop rolling
turn ur phone off, and take ur SD card out.
---------------------
now the ROM. i use Incubus26Jc's Super FroYo 2.2 [Deodexed] [RLS15]. u can grab it here : http://forum.xda-developers.com/showthread.php?t=759894
but u can choose another ROM.
format ur SD card to fat32. make a new folder, and rename it to : andboot
copy the androidinstall.tgz (or u will find androidinstall.tar) to andboot folder on ur SD card.
replace ur SD card, turn on ur phone. when u see the black screen with the rolling white text, hold ur dpad button, until u see the instalation screen. choose 1. install system
wait untill u read the "android instaled" text. (or the same meaning text)
ur android already instaled on ur kaiser now.
----------------------------------
the last step is, turn off ur phone, take ur SD card out, and copy the androidupdate.tar that u download it together with the kernel, to andboot folder on ur SD card. dont forget to delete the androidinstall file.
replace ur SD, turn on ur phone, at the black screen, hold ur dpad, until u find the menu, and choose : 4. Install update
if done, choose : 2. Fix permissions, then quit.
wait, make a cup of black cappucino, grab some sanwich. bcos it will take a long for ur kaiser to reach the android.
i hope me reply can help u.
for the other mate, dont forget to correct me if me wrong.
thx
i cannot instal the kernel...it says...quote: "C:\Users\Bogdan\Desktop\android\RUU_Signed.nbh" (this is an error). I can only choose ok and it exits
blacki3 said:
i cannot instal the kernel...it says...quote: "C:\Users\Bogdan\Desktop\android\RUU_Signed.nbh" (this is an error). I can only choose ok and it exits
Click to expand...
Click to collapse
it wud be easy for me to analyze the eror, if u give me the full eror message.
dont forget to turn off ur phone, and enter the boot loader. camera button and reset ur phone.
or try to rename the kernel file into KAISIMG.nbh
waiting for ur next try
this is the error
and i cannot find hardspl 3.34....when i download it from the link you provided it sais 3.29
actually...this is the error
I instaled the kernel but when i whant to install android it says something like.....failed...no space left on device. what could be the problem?
this is a bootlog

Newbie guide: HTC Desire: Stock FroYo to Gingerburst 2.1; simply (well 30 steps anywa

Hello all,
To make the actual guide more accessible I have moved my original ramblings that previously preceeded the actual guide to the bottom
[size=+1]Section 1reperation:[/size][size=-1]Download and unzip all the files needed[/size]
Step 1: Get yourself ready, download all the items you need (save them all in an easy to reach directory on your pc):
Revolution to root and s-off your phone: http://revolutionary.io/ credit to Eric Smaxwill • Koush Dutta • Adam Glasgall • Sen Verbrugge • Kenny Millington • Matthew Fogle • Joshua Wise • Michael Sullivan • Matt Mastracci • Ryan Pearl
Droidzone for the gingerburst rom: http://gingerburst.droidzone.in/ credit to Sibere for the Data2SD development •o$$!ram for the source build. •Robocik, Neophytex360, Coolexe for doing pioneer porting work •snq- for the kernel and Kernel mods, ext4 support, Wake-on-trackpad etc! •dsixda for the Android Kitchen •C0urier for hosting my site and for mirrors (Thanks a lot!) •deXter (and AdamG & _thalamus), Roach2010 for suggestions to improve the Data2SD code
http://revolutionary.io/revolutionary-0.3pre7.zip - windows version, unzip/extract all the files; although this is a direct link you really need to download this by going to http://revolutionary.io/ and clicking the link from there (you must have java enabled) as that causes the java frame to appear i the webpage which you use to get the key (used later)
http://downloads.unrevoked.com/HTCDriver3.0.0.007.exe - windows drivers
http://goo-inside.me/superuser/su-2.3.6.3-efgh-signed.zip - root superuser access; don’t unzip
http://hotfile.com/dl/125113123/dfb5a65/GingerBurst_1.0.0.3.zip.html - Gingerburst ROM; don’t unzip
http://gingerburst.droidzone.in/wp-content/plugins/download-monitor/download.php?id=1 – Data2SD installer; don’t unzip
http://gingerburst.droidzone.in/wp-content/plugins/download-monitor/download.php?id=2 – Data2SD reinstaller; don’t unzip
When you are done you should have a list of files as the below:
Data2SDInstallerNXE2.zip
Data2SDReInstallerNXE2.zip
GingerBurst_1.0.0.3.zip
HTCDriver3.0.0.007.exe
revolutionary-0.3pre7.zip
su-2.3.6.3-efgh-signed.zip
and a folder with the extracted items:
revolutionary-0.3pre7\AdbWinApi.dll
revolutionary-0.3pre7\libcurl-4.dll
revolutionary-0.3pre7\libjson-0.dll
revolutionary-0.3pre7\mgwz.dll
revolutionary-0.3pre7\msvcr71.dll
revolutionary-0.3pre7\revolutionary.exe
On your PC, using windows explorer navigated to the directory where the files are saved:
Step 2: Double click (run) the HTCDriver3.0.0.007.exe file to install the drivers
[size=+1]Section 2:Root & Super-user:[/size][size=-1]Use revolutionary to flash a new HBOOT, S-OFF your phone and install ClockWorkMOD recovery, then use ClockWorkMod to give Super-user[/size]
Step 3: Double click the revolutionary-0.3pre7 directory to enter it and
Step 4: Double click (run) the revolutionary.exe file
It will open a command window and get to a point where it is waiting.
Step 5: Either:
With your phone powered on. Go to Settings->Applications->Development and turn USB debugging on then Connect the USB cable between the phone and PC.
or
Power off the phone. Leave it for 20 seconds to be certain it is off. Press and Hold the Volume down button and while holding it press the power on button. Keep holding the volume button and very quickly the phone will enter Bootloader mode. Connect the USB cable between phone and PC.
Step 6: At this point the revolution command window will recognise the phone is attached and ask for the beta key. Select and copy it from the website you left open when downloading item 1) and then right click on the top strip of the command window where it has the revolution name, choose the option menu item Edit and paste – this ensures you get the beta key entered correctly (on my first go I tried to type it and mixed up l and I, and o and 0). Agree with what the revolution program asks and it will tell you if it was successful.
Step 7: Power off the phone. Leave it for 20 seconds to be certain it is off. Press and Hold the Volume down button and while holding it press the power on button. Keep holding the volume button and very quickly the phone will enter Bootloader mode. Use the volume down button to scroll one menu item down to Recovery and the power button to select that item. The screen will go white with the HTC logo and then after a short time will enter the ClockWorkMod recovery menu.
Step 8: Scroll down to and select the menu item “mounts and storage” and then scroll to the bottom item and select it (“mount USB storage”)
Step 9: If it is not plugged in, plug in your USB cable between the phone and PC and the PC should recognise the phone is SD card reader mode. If a windows explorer window does not open (or windows offer you a choice to browse the folder) then press the windows key+E at the same time to open a windows explorer window and navigate to the “Removable Disk” that is your SD card in the phone.
Step 10: Copy su-2.3.6.3-efgh-signed.zip from the PC to the SD card.
Step 11: Disconnect the USB cable and then on the phone select “unmount” and press the back button on the phone. Scroll down and select the menu item “install zip from SD card”. Scroll until you find su-2.3.6.3-efgh-signed.zip and select it. Once complete reboot.
[size=-1]For those who have apps, contacts, phone logs, sms messages etc. that they want to back-up, they should allow the phone to boot into normal mode. Download the various backup programs from the market – and as the phone is now rooted you can use all the apps that are mentioned at the bottom of the post.[/size]
[size=+1]Section 3:New ROM preperation:[/size][size=-1]Back-up, partition SD card and copy ROM files to SD card[/size]
Step 12: Power off the phone. Leave it for 20 seconds to be certain it is off. Press and Hold the Volume down button and while holding it press the power on button. Keep holding the volume button and very quickly the phone will enter Bootloader mode. Use the volume down button to scroll one menu item down to Recovery and the power button to select that item. The screen will go white with the HTC logo and then after a short time will enter the ClockWorkMod recovery menu.
Step 13: Scroll down and select “backup and restore” and then select “backup”. Clockworkmod will make a backup on the SDcard in the ClockWorkMod directory and show you progress as it does this. This ensures you can always return to this state at a later date if you wish.
Step 14: Once the back-up is complete, press the phones back button and then scroll down to and select the menu item “mounts and storage” and then scroll to the bottom item and select it (“mount USB storage”)
Step 15: If it is not plugged in, plug in your USB cable between the phone and PC and the PC should recognise the phone is SD card reader mode. If a windows explorer window does not open (or windows offer you a choice to browse the folder) then press the windows key+E at the same time to open a windows explorer window and navigate to the “Removable Disk” that is your SD card in the phone.
Step 16: Copy the entire contents of your SD card to a folder on the PC.
Step 17: Copy the following files downloaded previously into the folder on the PC where you have copied your SD card contents. They should be in the base folder. Files 4, 5 and 6: Data2SDInstallerNXE2.zip, Data2SDReInstallerNXE2.zip and GingerBurst_1.0.0.3.zip
Step 18: Disconnect the USB cable and then on the phone select “unmount” and press the back button on the phone. Scroll down and select the menu item “advanced”.
Step 19: Scroll down and select “partition SD card”. (Note this will wipe out your SD card contents – hence why we copied it to the PC).
Step 20: Choose a size for the ext partition that is 2048MB or less, but at least 500MB.
Step 21: Select 0M for the size of swap partition. NB: It is vital that this be 0 or Data2SD won’t work!
ClockworkMod will partition the SD card and inform you when it is done.
[size=-1]At this point I had a huge issue getting my PC to recognise the SD card through ClockWorkMod and had to reboot the phone, reboot the PC, uninstall the drivers on the PC ( by running HTCDriver3.0.0.007.exe ) and reinstall them (by running HTCDriver3.0.0.007.exe ) and only then would the PC see the SD card when ClockWorkMod is mounting it. I hope others don’t have this issue, but this is why I hav recommended keeping the USB cable disconnected and rebooting the phone at this point.[/size]
Step 22: Power off the phone. Leave it for 20 seconds to be certain it is off. Press and Hold the Volume down button and while holding it press the power on button. Keep holding the volume button and very quickly the phone will enter Bootloader mode. Use the volume down button to scroll one menu item down to Recovery and the power button to select that item. The screen will go white with the HTC logo and then after a short time will enter the ClockWorkMod recovery menu.
Step 23: Scroll down and select the menu item “mounts and storage” and then scroll to the bottom item and select it (“mount USB storage”)
Step 24: If it is not plugged in, plug in your USB cable between the phone and PC and the PC should recognise the phone is SD card reader mode. If a windows explorer window does not open (or windows offer you a choice to browse the folder) then press the windows key+E at the same time to open a windows explorer window and navigate to the “Removable Disk” that is your SD card in the phone.
Step 25: Copy the contents of the folder for the SD card that you made on the PC – so the entire contents that were on the SD card are now back on it + the downloaded files which you copied into the base directory. From windows explorer you should see on the removable disk the downloaded Files 4, 5 and 6: Data2SDInstallerNXE2.zip, Data2SDReInstallerNXE2.zip and GingerBurst_1.0.0.3.zip
[size=+1]Section 4: Flash Gingerburst ROM:[/size][size=-1]Flash GingerBurst_1.0.0.3.zip, reboot into phone mode, (don't install anything or sync) [/size]
Step 26: Scroll down and select the menu item “install zip from sdcard” and scroll to and select GingerBurst_1.0.0.3.zip from the list.
Step 27: ClockWorkMod will install the Gingerburst ROM. Once complete, press the back button on the phone and then select “reboot system now”. This will bring up the white screen with the HTC logo. It will take some time on this screen (if it is sitting for longer than 30 minutes there is an issue) and then it should begin loading up the new gingerbread install – though remember at this point the memory of the HTC desire has not been expanded onto the SDcard partition that was created, so choose your carrier e.g. Vodafone UK contract, skip the keyboard introduction and the google and other sync sections, until it begins to load the home screen. Wait while it does this – you may see some low memory warnings.
Step 28: Once it seems basically finished with this hold the power button of the phone in until the power-off menu appears. The new gingerbread power off menu has some more options – choose “Restart” and it will then bring up a sub-menu. Choose “Recovery”. This will boot directly into ClockWorkMod recovery.
[size=+1]Section 5: Flash Data2SD:[/size][size=-1]Flash Data2SDInstallerNXE2.zip , reboot into phone mode, Enjoy! [/size]
Step 29: Select “install from zip” and scroll to the file Data2SDInstallerNXE2.zip and select it. ClockWorkMod will now install the Data2SD mod which will format the ext partition you created earlier to an ext4 type. It will show you progress.
Step 30: Once complete, select “Reboot to system”
The white screen with the HTC logo will appear and for a brief moment the nearly invisible LED next to the silver htc at the top of your phone will flash blue – this is a good sign. The white screen with HTC logo will remain for a while, although expect it to flash of and back on or go a little darker every couple of minutes. (It should not stay this way for longer than 30 minutes – if it does there is a problem.)
Eventually the phone should boot up into phone mode, the memory warning should be gone and you are now the proud owner of a Gingerbread HTC desire with sense 2.1 and the phone memory extended onto the partition on the SD card.
Go wild, install apps to the phone, synchronise your gmail, calendar, contacts, facebook and everythingelse you can think of. The phone should be quick and responsive and there should be no memory warnings. Say thank you on the xda developer website to the the revolution team and the droidzone guys.
Let me know if we need corrections to this guide, or if you think it should have screenshots etc. to accompany it. (I have done it from memory, checking where feasible without actually repartitioning my SD card again etc., but since I did it all only last night it still be pretty much correct). I have done this using my only HTC Desire and a Windows 7 64bit pro Lenovo laptop.
Although it’s long I hope it’s not daunting anymore.
PS: Useful Backup programs (search for them in the market) – many require root access:
Titanium Backup (Titanium Track)
MyBackup Root (included in the Gingerburst ROM)
APN backup and restore (Ritesh Sahu)
Call Logs backup and restore (Ritesh Sahu)
SMS Backup and Restore (Ritesh Sahu)
ROM manager (ClockWorkMod)(very useful tool for those using custom ROMS, includes some functions for accessing and using ClockWorkMods ROM backup functions)
And of course ClockWorkMod itself – though this is installed by the process above and not through the market.
PPS: Below is my original ramblings that preveiously preceeded the steps. Moved here to make the actual guide a little more accessible.
Firstly a huge thank-you and humble appreciation to the incredible devs that created the hacks and cooked up the ROMS used in this tutorial. It precisely because they are so amazingly genius that perhaps they don’t realise just how daunting this all looks to a newbie. I have tried to credit everyone that deserves it but am bound to have missed someone who created some part of this or hosted some files etc., if you deserve credit bask in the warm glow of knowing you are a great person and then politely let me know and I’ll edit the post)
Personally I am not your average computer user and I have over a number of years used the tools from this and other forums to hack and mod various phones beginning with the original xda on which this site is named. I’ve had my desire for nearly a year, but partly because it’s such a good phone, partly because it’s my work phone (though that never stopped me before and partly because this time around it just seemed so complex with so many choices and options and methods (and worryingly chances to go wrong) I have not rooted it until now. The reason I took the plunge was the simple issue that I had already basically removed all non-daily-use apps and even downgraded the Adobe-flash support and other updated apps and was still running out of space!
That said, it took me about 10 attempts, during which on a number of occasions I was left with the white screen and HTC logo and nothing else Some of those were of course my own fault – I didn’t follow the instructions exactly :-| , some because I just hadn’t understood the instructions, or didn’t realise what was actually meant and some because I couldn’t get me hardware to work. (booting to the ISO image of Gparted totally refused to see the SD card in the phone )
This guide should hopefully bring all resources together in 1 place and make it absolutely clear how to do it the simplest way and with the least steps and using nothing other than the phone itself (where possible) and your pc linked to the phone via USB where necessary. I hope it’s OK to link directly to the downloads o download pages for the files – I have mentioned the websites they come from, but I’m sure the MODs will correct me if this is not permited.
To start with I assume you are on a brand new phone with nothing installed except the vanilla Froyo supplied with the phone. There are some very clever tools to back up your various bits of important info if you aren’t in this state and I would recommend you use them. I will try to show when and where they would be useful, but I am not aiming to show how to take a phone that been in use for a year and convert it to Gingerbread with Sense 2.1 and still have everything set up as was.
That is the longest post I have ever seen!!!...
Good job
Sent from my HTC Desire using XDA App
only some sorting and opmaak
I have to agree - it`s a big long post - it might be a good idea to put a few linebreaks in between each point, to space it out and make it easier to read
a second suggestion might be to put some sub-headers in..
e.g. -A download files, B root, C partition, D Install
Good points.
I'll have a go at tidying it up and creating logical sections tomorrow when I've got access to my PC.
Sent from my HTC Desire using XDA App
Lothaen said:
I have to agree - it`s a big long post - it might be a good idea to put a few linebreaks in between each point, to space it out and make it easier to read
a second suggestion might be to put some sub-headers in..
e.g. -A download files, B root, C partition, D Install
Click to expand...
Click to collapse
Totally agree. The content of the thread might be good (I am sure it is), but this advantage gets lost by its horrible formatting which makes it nearly unable to read.
Another suggestion, short the first part (before step one) to the really important points. On this way its focal point gets concentrated to the steps 1-30, which is what you want, I guess.
At last, I may advise you to read some sticky guides here to get a good impression how to format texts.
Nevertheless, you did good work!!
MatDrOiD said:
Totally agree. The content of the thread might be good (I am sure it is), but this advantage gets lost by its horrible formatting which makes it nearly unable to read.
Another suggestion, short the first part (before step one) to the really important points. On this way its focal point gets concentrated to the steps 1-30, which is what you want, I guess.
At last, I may advise you to read some sticky guides here to get a good impression how to format texts.
Nevertheless, you did good work!!
Click to expand...
Click to collapse
I have edited the original post:
1) Moved the original intro words to the bottom - the focus is as you said the guide
2) Re-formatted the text to make it more readable
Does that seem better?
Hello all,
This is a much shorter, less wordy version of the guide without all the detailed explanations, just the steps
[size=+1]Section 1reperation:[/size][size=-1]Download and unzip all the files needed[/size]
Step 1: Get yourself ready, download all the items you need (save them all in an easy to reach directory on your pc):
http://revolutionary.io/revolutionary-0.3pre7.zip - windows version, unzip/extract all the files; although this is a direct link you really need to download this by going to http://revolutionary.io/ and clicking the link from there (you must have java enabled) as that causes the java frame to appear i the webpage which you use to get the key (used later)
http://downloads.unrevoked.com/HTCDriver3.0.0.007.exe - windows drivers
http://goo-inside.me/superuser/su-2.3.6.3-efgh-signed.zip - root superuser access; don’t unzip
http://hotfile.com/dl/125113123/dfb5a65/GingerBurst_1.0.0.3.zip.html - Gingerburst ROM; don’t unzip
http://gingerburst.droidzone.in/wp-content/plugins/download-monitor/download.php?id=1 – Data2SD installer; don’t unzip
http://gingerburst.droidzone.in/wp-content/plugins/download-monitor/download.php?id=2 – Data2SD reinstaller; don’t unzip
When you are done you should have a list of files as the below:
Data2SDInstallerNXE2.zip
Data2SDReInstallerNXE2.zip
GingerBurst_1.0.0.3.zip
HTCDriver3.0.0.007.exe
revolutionary-0.3pre7.zip
su-2.3.6.3-efgh-signed.zip
Step 2: Run HTCDriver3.0.0.007.exe file to install the drivers
[size=+1]Section 2:Root & Super-user:[/size][size=-1]Use revolutionary to flash a new HBOOT, S-OFF your phone and install ClockWorkMOD recovery, then use ClockWorkMod to give Super-user[/size]
Step 3: Enter the revolutionary-0.3pre7 directory and
Step 4: Run the revolutionary.exe file
It will open a command window and get to a point where it is waiting.
Step 5:With your phone powered on. Turn USB debugging on then Connect the USB cable between the phone and PC.
Step 6: At this point the revolution command window will recognise the phone is attached and ask for the beta key. Select and copy it from the website you left open when downloading item 1) and then right click on the top strip of the command window where it has the revolution name, choose the option menu item Edit and paste – this ensures you get the beta key entered correctly. Agree with what the revolution program asks and it will tell you if it was successful.
Step 7: Enter Recovery mode: (Power off the phone. Leave it for 20 seconds to be certain it is off. Press and Hold the Volume down button and while holding it press the power on button. Keep holding the volume button and very quickly the phone will enter Bootloader mode. Use the volume down button to scroll one menu item down to Recovery and the power button to select that item. The screen will go white with the HTC logo and then after a short time will enter the ClockWorkMod recovery menu.)
Step 8: Select “mounts and storage” ->“mount USB storage”
Step 9: Connect Phone and PC via USB.
Step 10: Copy su-2.3.6.3-efgh-signed.zip from the PC to the SD card.
Step 11: Disconnect the USB cable and then on the phone select “unmount” and press the back button on the phone. Select “install zip from SD card”. Scroll until you find su-2.3.6.3-efgh-signed.zip and select it. Once complete reboot.
[size=-1]For those who have apps, contacts, phone logs, sms messages etc. that they want to back-up, they should allow the phone to boot into normal mode. Download the various backup programs from the market – and as the phone is now rooted you can use all the apps that are mentioned at the bottom of the post.[/size]
[size=+1]Section 3:New ROM preperation:[/size][size=-1]Back-up, partition SD card and copy ROM files to SD card[/size]
Step 12: Enter Recovery mode.
Step 13: Select “backup and restore” -> “backup”. Clockworkmod will make a backup on the SDcard in the ClockWorkMod directory and show you progress as it does this. This ensures you can always return to this state at a later date if you wish.
Step 14: Once the back-up is complete, press the phones back button and then select “mounts and storage” -> “mount USB storage”
Step 15: Connect Phone and PC via USB.
Step 16: Copy the entire contents of your SD card to a folder on the PC.
Step 17: Copy the following files downloaded previously into the folder on the PC where you have copied your SD card contents. They should be in the base folder. Files 4, 5 and 6: Data2SDInstallerNXE2.zip, Data2SDReInstallerNXE2.zip and GingerBurst_1.0.0.3.zip
Step 18: Disconnect the USB cable and then on the phone select “unmount” and press the back button on the phone.
Step 19: Select “advanced”->“partition SD card”. (Note this will wipe out your SD card contents – hence why we copied it to the PC).
Step 20: Choose a size for the ext partition that is 2048MB or less, but at least 500MB.
Step 21: Select 0M for the size of swap partition. NB: It is vital that this be 0 or Data2SD won’t work!
ClockworkMod will partition the SD card and inform you when it is done.
Step 22: Enter Recovery Mode.
Step 23: Select “mounts and storage” -> “mount USB storage”
Step 24: Cnnect Phone and PC vis USB.
Step 25: Copy the contents of the folder for the SD card that you made on the PC – so the entire contents that were on the SD card are now back on it + the downloaded files which you copied into the base directory. From windows explorer you should see on the removable disk the downloaded Files 4, 5 and 6: Data2SDInstallerNXE2.zip, Data2SDReInstallerNXE2.zip and GingerBurst_1.0.0.3.zip
[size=+1]Section 4: Flash Gingerburst ROM:[/size][size=-1]Flash GingerBurst_1.0.0.3.zip, reboot into phone mode, (don't install anything or sync) [/size]
Step 26: On the phone, unmount, then select “install zip from sdcard” and scroll to and select GingerBurst_1.0.0.3.zip from the list.
Step 27: ClockWorkMod will install the Gingerburst ROM. Once complete, press the back button on the phone and then select “reboot system now”. This will bring up the white screen with the HTC logo. It will take some time on this screen (if it is sitting for longer than 30 minutes there is an issue) and then it should begin loading up the new gingerbread install – though remember at this point the memory of the HTC desire has not been expanded onto the SDcard partition that was created, so choose your carrier e.g. Vodafone UK contract, skip the keyboard introduction and the google and other sync sections, until it begins to load the home screen. Wait while it does this – you may see some low memory warnings.
Step 28: Once it seems basically finished with this hold the power button of the phone in until the power-off menu appears. The new gingerbread power off menu has some more options – choose “Restart” and it will then bring up a sub-menu. Choose “Recovery”. This will boot directly into ClockWorkMod recovery.
[size=+1]Section 5: Flash Data2SD:[/size][size=-1]Flash Data2SDInstallerNXE2.zip , reboot into phone mode, Enjoy! [/size]
Step 29: Select “install from zip” and scroll to the file Data2SDInstallerNXE2.zip and select it. ClockWorkMod will now install the Data2SD mod which will format the ext partition you created earlier to an ext4 type. It will show you progress.
Step 30: Once complete, select “Reboot to system”
The white screen with the HTC logo will appear and for a brief moment the nearly invisible LED next to the silver htc at the top of your phone will flash blue – this is a good sign. The white screen with HTC logo will remain for a while, although expect it to flash of and back on or go a little darker every couple of minutes. (It should not stay this way for longer than 30 minutes – if it does there is a problem.)
Eventually the phone should boot up into phone mode, the memory warning should be gone and you are now the proud owner of a Gingerbread HTC desire with sense 2.1 and the phone memory extended onto the partition on the SD card.
Go wild, install apps to the phone, synchronise your gmail, calendar, contacts, facebook and everythingelse you can think of. The phone should be quick and responsive and there should be no memory warnings. Say thank you on the xda developer website to the the revolution team and the droidzone guys.
PS: Useful Backup programs (search for them in the market) – many require root access:
Titanium Backup (Titanium Track)
MyBackup Root (included in the Gingerburst ROM)
APN backup and restore (Ritesh Sahu)
Call Logs backup and restore (Ritesh Sahu)
SMS Backup and Restore (Ritesh Sahu)
ROM manager (ClockWorkMod)(very useful tool for those using custom ROMS, includes some functions for accessing and using ClockWorkMods ROM backup functions)
And of course ClockWorkMod itself – though this is installed by the process above and not through the market.
great - sticky?
Much better now. Ask a moderator for sticking it.
Thanks for the guide. I was having trouble rooting my Desire with Revoked3 but I managed using your guide Got SU now
Off to find a nice ROM
Glad it helped.
If you want the easy route, download ROM manager from the market. It will allow you to easily experiment with lots of different ROMs. It from the clockorkmod people so integrates totally with the clockwork mod recovery.
Sent from my HTC Desire using XDA App
Nice Post, sticky deserved!
Wow..Thought it was a quick two step (Flash and reboot) method to install my Rom
Appreciate the lengths to which you have explained the procedure, would help people who are not clear about the intermediate steps. Thanks..
If you like, I'll open up Editor privileges on my site so that you can add a post there too.. PM me if you're like to..
Btw, I'd prefer that you turn the ROM/Data2SD installer download links to this: supernova.droidzone.in
Else, people might end up downloading an older version when I update the code..
droidzone said:
Wow..Thought it was a quick two step (Flash and reboot) method to install my Rom
Appreciate the lengths to which you have explained the procedure, would help people who are not clear about the intermediate steps. Thanks..
If you like, I'll open up Editor privileges on my site so that you can add a post there too.. PM me if you're like to..
Btw, I'd prefer that you turn the ROM/Data2SD installer download links to this: supernova.droidzone.in
Else, people might end up downloading an older version when I update the code..
Click to expand...
Click to collapse
Once it's been done a few times it is quick and easy. Also using ROM manager is another way to make it easy. It really was just the first time that it all seemed a little daunting. Also I didn't realise that I needed to download both the ROM and the DATA2SD file (seems obvious now, but somehow wasn't then).
I copied the short(er) version to my post on your site as you suggested.
I have left the download links at the moment because I used the Gingerburst ROM and that's the title I gave to the post, though I assume the steps are nearly exactly the same for all your ROMs. Also - Gingerburst has Sense 2.1, but Supernova has only got Sense 1.9.
If you are planning to focus all future development on Supernova then perhaps a title change to the post is required and then the links changed also? or otherwise a general title change to "...Stock FroYo to DROIDZONE roms" and a table with the links to the downloads required for each of the different ROM types?
Cheers for the guide, hadn't wanted to try rooting before but got fed up in the end and followed your guide - only bits I got stuck on were CWM not installing after revolution (but worked out how to install separately by searching on here) plus Gingerburst didn't work first time so tried a couple other roms (which didn't work either) but think was probably because I either hadn't partitioned the sd card properly (just used CWM to do it) or didn't do a full wipe of phone memory first either! Figured it out in the end (trial and error) so thanks a lot for the straightforward instructions - quite exciting getting it working and really pleased with Gingerburst! Not sure if I can be arsed trying anything else at the moment tho.
wow great job!! Thanks for the time and effort in typing all of that!
Glad the guide gave you the confidence to give it a go - though its a pity it didn't work first time.
I can't even imagine what happened that revolution did not install cwm - on mine it installed a v 4 (ROM manager didn't recognise it as a later version so in fact has installed a v 2 now instead)
I actually did use cwm to partition the SD card, but Gingerburst should install even if the card is not properly partitioned - you will just get loads of low memory warnings and force closes - until you partition the SD card and install the data2sd through cwm.
I must agree - now that I have Gingerburst and its working so well and I been installing so many apps from the market it really seems like a lot of effort (even using ROM manager) to bother trying anything else out!
Sent from my HTC Desire using XDA App
Quick question guys, I've unlocked my orange handset using the desire sim unlock utility, should I follow these steps to change my rom or do I need to do the whole goldcard thing?
Cheers!
Sent from my HTC Desire using XDA Premium App
Guys, I think I rooted my Desire following this guide : http://forum.xda-developers.com/showthread.php?t=788044
what should I do now?
Is there a way to do it without the 'clockworkmod' ?
Also, if sometime I wanna go back to stock, is there a way to completely go back?
Thank you and have a nice day!
edit: forget all that, i wanna use the SuperNova rom =p i just cant delete the post for some reason
so, if you can, reply here : http://forum.xda-developers.com/showthread.php?p=17710610#post17710610
thanks a lot!

HOW-TO: HTC T328W/Wind Dual-Sim from China - Complete guide to install Google Apps

HOW-TO: HTC T328W from China (Bootloader unlock, rooting, installing Google apps and removing bloatware.
02/July/2012
This guide has been tested on two HTC T328W dual-sim phones bought from China. It has also been tested with the following Build numbers and baseband versions and both worked perfectly.
Dear mods: I know this is not the correct thread for this phone. Please create a new subforum for this great phone and move all T328W threads into it. They are all over the place (from One V to Desire, etc.). Thanks.
!!I AM NOT RESPONSIBLE IF YOU BRICK YOUR PHONE!!
Phone 1:
Kernel: 3.0.16
Baseband: 1.04.34D.11_20.11.30.11U
Build number: 1.35.1402.1
Browser: 534.30
Phone 2:
Kernel: 3.0.16
Baseband: 1.06.34D
Build number: 1.56.1402.6
Browser: 534.30
The zip file containing all needed files can be found at mediafire . c o m / ?783kthx72x3uf5d .
I could not attach the zip file (I get a page not found) and am not allowed to post outside links yet.
Bootloader unlocking
1. Let’s change the language to English first so we understand the phone better. Open the apps menu and go to the Settings icon (the cogwheel icon). Scroll down to the setting with the “A” icon. Click the first item in the list and choose English.
2. Go to htcdev . c o m, create an account and click the Unlock bootloader icon. After logging in, choose “All Other Supported Models” from the list and click the Begin Unlock Boatloader button. Accept that you may lose any guarantee and continue to follow the instructions.
3. To enter bootloader mode, make sure the phone is off (or remove the battery for a few seconds). Then hold Volume Down and start pressing the Power button – without any USB cable. Use the up and down buttons to select “Fastboot” and select it using the Power button. Now connect your USB cable and continue following the HTC instructions.
4. All the files you need are in the zip you can get above. I also installed the HTC Sync program which installs the drivers. Using the command prompt you can simply navigate to the extracted files and run the fastboot command. (Use the command “cd C:/myextractedzip” to change to a directory).
5. Save the Unlock_Code.bin attachment which you get from HTC by Email into the same extracted zip folder and run the next command. You now have an unlocked bootloader and the phone will start up and an HTC wizard will appear where you can choose the English language again.
Flashing clockworkmod
1. Remove any USB cables and boot again into the bootloader mode. Click Fastboot and reconnect your USB cable. Now run the following command on your computer: fastboot flash recovery recovery.img . This flashes the clockworkmod recovery image onto the phone.
2. Switch off your phone. Make sure your USB cable is removed.
3. Now copy the “app” folder from the zip onto a micro-sd card. Also copy the “CWM-SuperSU-v0.92.zip” and “rootexplorer_2.16.apk” onto the micro-sd card.
4. Insert the micro-sd card into the phone and boot into boatloader mode again.
5. Now choose the recovery option instead of fastboot and wait for clockworkmod recovery to appear.
Rooting the phone
1. In clockworkmod recovery, choose install zip from sdcard
2. Choose “choose zip from sdcard” and choose “CWM-SuperSU…zip”
3. Scroll down to “Yes – Install CWM-SuperSu” and wait. Now go back and reboot the phone normally.
Installing Google Apps
1. Using the included file manager on the phone, click on “rootexplorer.apk” and install it. When launching root explorer, make sure you grant it superuser permissions.
2. Go click the “sdcard” folder and press and hold the “app” folder that you copied from the zip file. Click “copy” and then navigate to /system . Press “Mount R/W”. And then click “Paste”. Choose Yes to overwrite. Exit root explorer.
3. Now we need to fix the permissions. The easiest way is if you enable USB Debugging mode from the “Developer Options” settings. Make sure you connect your USB cable.
4. Open a command prompt to our extracted zip folder and type “adb shell”. Press enter and you should see “[email protected]:/ $”. Run “su”. Run “cd /system/app”.
5. Now to fix all permissions, run “chmod 644 *.apk” and then run “chown root.root *.apk” .
6. Now run “reboot” to reboot your phone.
Removing bloatware apps
1. Thanks to dark_hawk from xda-developers, we have a list of system apps/bloatware that are save to remove. You can easily do this from the root explorer app. Go to /system/app and hold each item you want to delete. Then click delete. You can also remove each app’s odex file.
The list:
116114.apk
2254_HTCCU_WO3G_SIE.apk
DoubanFM.apk
DreyeCHSPkg40.apk
HTCCN_FileManager.apk
HTC_Widget_Renren.apk
HTC_Widget_Sina_Weibo.apk
HTC_Widget_Sina_Weibo_Nearby.apk
HTC_Widget_Sina_Weibo_Trend.apk
HTC_Widget_Sina_Weibo_Trend.apk
HtcMusicEnhancer_China_Sina.apk
HtcMusic_China_Sina.apk
PhoneMail.apk
QQ2011.apk
Renren_FSplugin.apk
Renren_GLRplugin.apk
SinaMusic.apk
Sina_Weibo_FSPlugin.apk
Sina_Weibo_GLRplugin.apk
SohuNews.apk
VDisk.apk
Weibo.apk
eMoney.apk
mapbar.apk
renren.apk
unicomclient_HTCT328W.apk
vegetable.apk
wefound.apk
2. Then run “reboot” to reboot your phone.
3. After the reboot you might still find some Chinese language apps. These can be removed with an app from the Play Store such as Root Uninstaller.
by SeBsZ.
If you have any problems, please post below and I will answer and/or update this post.
followed your guide and managed to install the google apps, including Play Market.
Big thanks!
By the way, did you try to install a newer version of android/ ROM?
Hi
Thanks for the instructions. I have installed the update successfully.
Although installing the market initially failed. Before that the phone booted.
After applying the google aps bit the phone didn't startup again it hang at the 'HTC quitly brilliant' screen.
Although after first reinstalling the RUU and after that doing this procedure again it worked. I'm new to Android I can follow instructions although I'm clouless of what I'am actually doing.
I have a few problems though:
1.
After installing however I have a problem that google play now sais that I can't install runkeeper because my phone isn't compatible.
I was able to install this program before on this phone. Anyone a clue on that?
2.
Also I have a problem that if I wan't to apply a system update of android from the about screen it will error with "assert failed: getprop("ro:cid") == "00000000"
Anyone a sollution for that specific for this phone?
3.
Also I have a problem with this phone that my 3G internet is working strangly. I hoped to solve this with installing a newer version.
Some applications are always working like play store, facebook, friendcaster. Youtube app works ok when browsing videos, although can't play.
Whatsapp only seems to work a few minutes after the 3G connection is set up. And internet browsing doesn't work at all. I tried opera and firefox.
With WIFI all is good and then it is a wonderfull phone.
I get good download speeds when I install a program from google play.
Although I would love to have a stable whatsapp and browsing capabilities while i'm away from wifi. Anyone familliar with this problem?
I was hoping to adress the internet issue by updating ICS, although like stated this also fails.
Many thanks ina advance for your help!
Hi
following your instruction I just updated 3 pcs of HTC Build number: 1.56.1402.6. All done, all OK. One think that voice search is not working on phone dialpad, I have to remove it and install voice search from the market - now in apps like maps, phone search working fine. Till now I didn't find any else problem
Thanks very much. BR Kris
SeBsZ said:
HOW-TO: HTC T328W from China (Bootloader unlock, rooting, installing Google apps and removing bloatware.
02/July/2012
This guide has been tested on two HTC T328W dual-sim phones bought from China. It has also been tested with the following Build numbers and baseband versions and both worked perfectly.
Dear mods: I know this is not the correct thread for this phone. Please create a new subforum for this great phone and move all T328W threads into it. They are all over the place (from One V to Desire, etc.). Thanks.
!!I AM NOT RESPONSIBLE IF YOU BRICK YOUR PHONE!!
Phone 1:
Kernel: 3.0.16
Baseband: 1.04.34D.11_20.11.30.11U
Build number: 1.35.1402.1
Browser: 534.30
Phone 2:
Kernel: 3.0.16
Baseband: 1.06.34D
Build number: 1.56.1402.6
Browser: 534.30
The zip file containing all needed files can be found at mediafire . c o m / ?783kthx72x3uf5d .
I could not attach the zip file (I get a page not found) and am not allowed to post outside links yet.
Bootloader unlocking
1. Let’s change the language to English first so we understand the phone better. Open the apps menu and go to the Settings icon (the cogwheel icon). Scroll down to the setting with the “A” icon. Click the first item in the list and choose English.
2. Go to htcdev . c o m, create an account and click the Unlock bootloader icon. After logging in, choose “All Other Supported Models” from the list and click the Begin Unlock Boatloader button. Accept that you may lose any guarantee and continue to follow the instructions.
3. To enter bootloader mode, make sure the phone is off (or remove the battery for a few seconds). Then hold Volume Down and start pressing the Power button – without any USB cable. Use the up and down buttons to select “Fastboot” and select it using the Power button. Now connect your USB cable and continue following the HTC instructions.
4. All the files you need are in the zip you can get above. I also installed the HTC Sync program which installs the drivers. Using the command prompt you can simply navigate to the extracted files and run the fastboot command. (Use the command “cd C:/myextractedzip” to change to a directory).
5. Save the Unlock_Code.bin attachment which you get from HTC by Email into the same extracted zip folder and run the next command. You now have an unlocked bootloader and the phone will start up and an HTC wizard will appear where you can choose the English language again.
Flashing clockworkmod
1. Remove any USB cables and boot again into the bootloader mode. Click Fastboot and reconnect your USB cable. Now run the following command on your computer: fastboot flash recovery recovery.img . This flashes the clockworkmod recovery image onto the phone.
2. Switch off your phone. Make sure your USB cable is removed.
3. Now copy the “app” folder from the zip onto a micro-sd card. Also copy the “CWM-SuperSU-v0.92.zip” and “rootexplorer_2.16.apk” onto the micro-sd card.
4. Insert the micro-sd card into the phone and boot into boatloader mode again.
5. Now choose the recovery option instead of fastboot and wait for clockworkmod recovery to appear.
Rooting the phone
1. In clockworkmod recovery, choose install zip from sdcard
2. Choose “choose zip from sdcard” and choose “CWM-SuperSU…zip”
3. Scroll down to “Yes – Install CWM-SuperSu” and wait. Now go back and reboot the phone normally.
Installing Google Apps
1. Using the included file manager on the phone, click on “rootexplorer.apk” and install it. When launching root explorer, make sure you grant it superuser permissions.
2. Go click the “sdcard” folder and press and hold the “app” folder that you copied from the zip file. Click “copy” and then navigate to /system . Press “Mount R/W”. And then click “Paste”. Choose Yes to overwrite. Exit root explorer.
3. Now we need to fix the permissions. The easiest way is if you enable USB Debugging mode from the “Developer Options” settings. Make sure you connect your USB cable.
4. Open a command prompt to our extracted zip folder and type “adb shell”. Press enter and you should see “[email protected]:/ $”. Run “su”. Run “cd /system/app”.
5. Now to fix all permissions, run “chmod 644 *.apk” and then run “chown root.root *.apk” .
6. Now run “reboot” to reboot your phone.
Removing bloatware apps
1. Thanks to dark_hawk from xda-developers, we have a list of system apps/bloatware that are save to remove. You can easily do this from the root explorer app. Go to /system/app and hold each item you want to delete. Then click delete. You can also remove each app’s odex file.
The list:
116114.apk
2254_HTCCU_WO3G_SIE.apk
DoubanFM.apk
DreyeCHSPkg40.apk
HTCCN_FileManager.apk
HTC_Widget_Renren.apk
HTC_Widget_Sina_Weibo.apk
HTC_Widget_Sina_Weibo_Nearby.apk
HTC_Widget_Sina_Weibo_Trend.apk
HTC_Widget_Sina_Weibo_Trend.apk
HtcMusicEnhancer_China_Sina.apk
HtcMusic_China_Sina.apk
PhoneMail.apk
QQ2011.apk
Renren_FSplugin.apk
Renren_GLRplugin.apk
SinaMusic.apk
Sina_Weibo_FSPlugin.apk
Sina_Weibo_GLRplugin.apk
SohuNews.apk
VDisk.apk
Weibo.apk
eMoney.apk
mapbar.apk
renren.apk
unicomclient_HTCT328W.apk
vegetable.apk
wefound.apk
2. Then run “reboot” to reboot your phone.
3. After the reboot you might still find some Chinese language apps. These can be removed with an app from the Play Store such as Root Uninstaller.
by SeBsZ.
If you have any problems, please post below and I will answer and/or update this post.
Click to expand...
Click to collapse
Hello guy,
I received this morning this phone from Etotalk.
I bought also from them their preinstalled services including multilangiage OS and unlocking and rooting services (I know how to root but 'cause price was so low....).
However I received the phone...but...:
1. Only English & China language installed
2. Wlan & btooth doesn't work
When I switch on the WLAN appears error message. And remains 'Turning WLAN on'. Also Btooth doesn't switch on
So I am asking myself if this is related to the root process or somewhat else or is an hardware problem ??
I want to flash again a new rom but I don't know where to retrive an ICS rom with italian language....
I opened also a dispute in Paypal.......
Is it possible that all is related to a software problem and not an hardware problem ?
Please let me know, if you can....
Regards
marylong68
marylong68 said:
Hello guy,
I received this morning this phone from Etotalk.
I bought also from them their preinstalled services including multilangiage OS and unlocking and rooting services (I know how to root but 'cause price was so low....).
However I received the phone...but...:
1. Only English & China language installed
2. Wlan & btooth doesn't work
When I switch on the WLAN appears error message. And remains 'Turning WLAN on'. Also Btooth doesn't switch on
So I am asking myself if this is related to the root process or somewhat else or is an hardware problem ??
I want to flash again a new rom but I don't know where to retrive an ICS rom with italian language....
I opened also a dispute in Paypal.......
Is it possible that all is related to a software problem and not an hardware problem ?
Please let me know, if you can....
Regards
marylong68
Click to expand...
Click to collapse
Mine is from etotalk too and it works fine!
Try to make first reset the phone! Should be working then! I think, it`s only software problem! if it`s rootet, install the recovery from here:
http://forum.xda-developers.com/showthread.php?t=1751788
and make a NAND Backup! Then you can try to flash the newest European ROM!
But in first step, try to reset the complete phone in SETTINGS-Storage scroll down to end here!
My Desire V is from India and worked fine now i have rooted phone thanks
BB version# 1.05.34D.29_20.21.30.23U
Build # 1.60.720.5 CL69250 release-key
Browser version # Webkit/534.30
@ Petteri
Any hints on how to make NAND backup? Actually I want to make a backup image of existing setup before playing with it, so as if something goes wrong, I can come back to present state. My phone is also from etotalk. So any help on making recovery backup would be appreciated.
help
i need help.. can someone upload the simtoolkit? or send to my email? thank you so much for the help!!
please help
SeBsZ said:
HOW-TO: HTC T328W from China (Bootloader unlock, rooting, installing Google apps and removing bloatware.
02/July/2012
This guide has been tested on two HTC T328W dual-sim phones bought from China. It has also been tested with the following Build numbers and baseband versions and both worked perfectly.
Dear mods: I know this is not the correct thread for this phone. Please create a new subforum for this great phone and move all T328W threads into it. They are all over the place (from One V to Desire, etc.). Thanks.
!!I AM NOT RESPONSIBLE IF YOU BRICK YOUR PHONE!!
Phone 1:
Kernel: 3.0.16
Baseband: 1.04.34D.11_20.11.30.11U
Build number: 1.35.1402.1
Browser: 534.30
Phone 2:
Kernel: 3.0.16
Baseband: 1.06.34D
Build number: 1.56.1402.6
Browser: 534.30
The zip file containing all needed files can be found at mediafire . c o m / ?783kthx72x3uf5d .
I could not attach the zip file (I get a page not found) and am not allowed to post outside links yet.
Bootloader unlocking
1. Let’s change the language to English first so we understand the phone better. Open the apps menu and go to the Settings icon (the cogwheel icon). Scroll down to the setting with the “A” icon. Click the first item in the list and choose English.
2. Go to htcdev . c o m, create an account and click the Unlock bootloader icon. After logging in, choose “All Other Supported Models” from the list and click the Begin Unlock Boatloader button. Accept that you may lose any guarantee and continue to follow the instructions.
3. To enter bootloader mode, make sure the phone is off (or remove the battery for a few seconds). Then hold Volume Down and start pressing the Power button – without any USB cable. Use the up and down buttons to select “Fastboot” and select it using the Power button. Now connect your USB cable and continue following the HTC instructions.
4. All the files you need are in the zip you can get above. I also installed the HTC Sync program which installs the drivers. Using the command prompt you can simply navigate to the extracted files and run the fastboot command. (Use the command “cd C:/myextractedzip” to change to a directory).
5. Save the Unlock_Code.bin attachment which you get from HTC by Email into the same extracted zip folder and run the next command. You now have an unlocked bootloader and the phone will start up and an HTC wizard will appear where you can choose the English language again.
Flashing clockworkmod
1. Remove any USB cables and boot again into the bootloader mode. Click Fastboot and reconnect your USB cable. Now run the following command on your computer: fastboot flash recovery recovery.img . This flashes the clockworkmod recovery image onto the phone.
2. Switch off your phone. Make sure your USB cable is removed.
3. Now copy the “app” folder from the zip onto a micro-sd card. Also copy the “CWM-SuperSU-v0.92.zip” and “rootexplorer_2.16.apk” onto the micro-sd card.
4. Insert the micro-sd card into the phone and boot into boatloader mode again.
5. Now choose the recovery option instead of fastboot and wait for clockworkmod recovery to appear.
Rooting the phone
1. In clockworkmod recovery, choose install zip from sdcard
2. Choose “choose zip from sdcard” and choose “CWM-SuperSU…zip”
3. Scroll down to “Yes – Install CWM-SuperSu” and wait. Now go back and reboot the phone normally.
Installing Google Apps
1. Using the included file manager on the phone, click on “rootexplorer.apk” and install it. When launching root explorer, make sure you grant it superuser permissions.
2. Go click the “sdcard” folder and press and hold the “app” folder that you copied from the zip file. Click “copy” and then navigate to /system . Press “Mount R/W”. And then click “Paste”. Choose Yes to overwrite. Exit root explorer.
3. Now we need to fix the permissions. The easiest way is if you enable USB Debugging mode from the “Developer Options” settings. Make sure you connect your USB cable.
4. Open a command prompt to our extracted zip folder and type “adb shell”. Press enter and you should see “[email protected]:/ $”. Run “su”. Run “cd /system/app”.
5. Now to fix all permissions, run “chmod 644 *.apk” and then run “chown root.root *.apk” .
6. Now run “reboot” to reboot your phone.
Removing bloatware apps
1. Thanks to dark_hawk from xda-developers, we have a list of system apps/bloatware that are save to remove. You can easily do this from the root explorer app. Go to /system/app and hold each item you want to delete. Then click delete. You can also remove each app’s odex file.
The list:
116114.apk
2254_HTCCU_WO3G_SIE.apk
DoubanFM.apk
DreyeCHSPkg40.apk
HTCCN_FileManager.apk
HTC_Widget_Renren.apk
HTC_Widget_Sina_Weibo.apk
HTC_Widget_Sina_Weibo_Nearby.apk
HTC_Widget_Sina_Weibo_Trend.apk
HTC_Widget_Sina_Weibo_Trend.apk
HtcMusicEnhancer_China_Sina.apk
HtcMusic_China_Sina.apk
PhoneMail.apk
QQ2011.apk
Renren_FSplugin.apk
Renren_GLRplugin.apk
SinaMusic.apk
Sina_Weibo_FSPlugin.apk
Sina_Weibo_GLRplugin.apk
SohuNews.apk
VDisk.apk
Weibo.apk
eMoney.apk
mapbar.apk
renren.apk
unicomclient_HTCT328W.apk
vegetable.apk
wefound.apk
2. Then run “reboot” to reboot your phone.
3. After the reboot you might still find some Chinese language apps. These can be removed with an app from the Play Store such as Root Uninstaller.
by SeBsZ.
If you have any problems, please post below and I will answer and/or update this post.
Click to expand...
Click to collapse
hi.. just bought this phone month ago.. im from malaysia.. just followed this step by step.. but i had several error..
1. my play store have an error.. didnt work.. cant open..
2. 3g connection unstable.. very slow to open internet browser..
please help me if u have the solution.. tq
amin1009 said:
hi.. just bought this phone month ago.. im from malaysia.. just followed this step by step.. but i had several error..
1. my play store have an error.. didnt work.. cant open..
2. 3g connection unstable.. very slow to open internet browser..
please help me if u have the solution.. tq
Click to expand...
Click to collapse
Hi there, I'm from Malaysia too.. just send PM so i can assist you
amin1009 said:
hi.. just bought this phone month ago.. im from malaysia.. just followed this step by step.. but i had several error..
1. my play store have an error.. didnt work.. cant open..
2. 3g connection unstable.. very slow to open internet browser..
please help me if u have the solution.. tq
Click to expand...
Click to collapse
hey, i bought the phone from MY too..working flawlessly by following the steps provided.
My phone details:-
kernel: 3.0.16
baseband: 1.05.34d.29_20.21.30.23u
build: 1.60.707.5
browser ver: 534.30
I followed the steps and rooted my phone successfully (After you received the email from HTC, make sure you click the link and follow the steps on the web page.). Thank you so much!
But how to add a google account? I tried Settings -> 'Accounts & sync' -> Add. I can see 'Exchange activeSync', 'HTC account', 'Mail', 'Ms hotmail', 'SkyDrive'. However, there is no 'Google' option.
HELP!
I got trouble, after i root my phone.
SeBsZ said:
HOW-TO: HTC T328W from China (Bootloader unlock, rooting, installing Google apps and removing bloatware.
02/July/2012
This guide has been tested on two HTC T328W dual-sim phones bought from China. It has also been tested with the following Build numbers and baseband versions and both worked perfectly.
Dear mods: I know this is not the correct thread for this phone. Please create a new subforum for this great phone and move all T328W threads into it. They are all over the place (from One V to Desire, etc.). Thanks.
!!I AM NOT RESPONSIBLE IF YOU BRICK YOUR PHONE!!
Phone 1:
Kernel: 3.0.16
Baseband: 1.04.34D.11_20.11.30.11U
Build number: 1.35.1402.1
Browser: 534.30
Phone 2:
Kernel: 3.0.16
Baseband: 1.06.34D
Build number: 1.56.1402.6
Browser: 534.30
The zip file containing all needed files can be found at mediafire . c o m / ?783kthx72x3uf5d .
I could not attach the zip file (I get a page not found) and am not allowed to post outside links yet.
Bootloader unlocking
1. Let’s change the language to English first so we understand the phone better. Open the apps menu and go to the Settings icon (the cogwheel icon). Scroll down to the setting with the “A” icon. Click the first item in the list and choose English.
2. Go to htcdev . c o m, create an account and click the Unlock bootloader icon. After logging in, choose “All Other Supported Models” from the list and click the Begin Unlock Boatloader button. Accept that you may lose any guarantee and continue to follow the instructions.
3. To enter bootloader mode, make sure the phone is off (or remove the battery for a few seconds). Then hold Volume Down and start pressing the Power button – without any USB cable. Use the up and down buttons to select “Fastboot” and select it using the Power button. Now connect your USB cable and continue following the HTC instructions.
4. All the files you need are in the zip you can get above. I also installed the HTC Sync program which installs the drivers. Using the command prompt you can simply navigate to the extracted files and run the fastboot command. (Use the command “cd C:/myextractedzip” to change to a directory).
5. Save the Unlock_Code.bin attachment which you get from HTC by Email into the same extracted zip folder and run the next command. You now have an unlocked bootloader and the phone will start up and an HTC wizard will appear where you can choose the English language again.
Flashing clockworkmod
1. Remove any USB cables and boot again into the bootloader mode. Click Fastboot and reconnect your USB cable. Now run the following command on your computer: fastboot flash recovery recovery.img . This flashes the clockworkmod recovery image onto the phone.
2. Switch off your phone. Make sure your USB cable is removed.
3. Now copy the “app” folder from the zip onto a micro-sd card. Also copy the “CWM-SuperSU-v0.92.zip” and “rootexplorer_2.16.apk” onto the micro-sd card.
4. Insert the micro-sd card into the phone and boot into boatloader mode again.
5. Now choose the recovery option instead of fastboot and wait for clockworkmod recovery to appear.
Rooting the phone
1. In clockworkmod recovery, choose install zip from sdcard
2. Choose “choose zip from sdcard” and choose “CWM-SuperSU…zip”
3. Scroll down to “Yes – Install CWM-SuperSu” and wait. Now go back and reboot the phone normally.
Installing Google Apps
1. Using the included file manager on the phone, click on “rootexplorer.apk” and install it. When launching root explorer, make sure you grant it superuser permissions.
2. Go click the “sdcard” folder and press and hold the “app” folder that you copied from the zip file. Click “copy” and then navigate to /system . Press “Mount R/W”. And then click “Paste”. Choose Yes to overwrite. Exit root explorer.
3. Now we need to fix the permissions. The easiest way is if you enable USB Debugging mode from the “Developer Options” settings. Make sure you connect your USB cable.
4. Open a command prompt to our extracted zip folder and type “adb shell”. Press enter and you should see “[email protected]:/ $”. Run “su”. Run “cd /system/app”.
5. Now to fix all permissions, run “chmod 644 *.apk” and then run “chown root.root *.apk” .
6. Now run “reboot” to reboot your phone.
Removing bloatware apps
1. Thanks to dark_hawk from xda-developers, we have a list of system apps/bloatware that are save to remove. You can easily do this from the root explorer app. Go to /system/app and hold each item you want to delete. Then click delete. You can also remove each app’s odex file.
The list:
116114.apk
2254_HTCCU_WO3G_SIE.apk
DoubanFM.apk
DreyeCHSPkg40.apk
HTCCN_FileManager.apk
HTC_Widget_Renren.apk
HTC_Widget_Sina_Weibo.apk
HTC_Widget_Sina_Weibo_Nearby.apk
HTC_Widget_Sina_Weibo_Trend.apk
HTC_Widget_Sina_Weibo_Trend.apk
HtcMusicEnhancer_China_Sina.apk
HtcMusic_China_Sina.apk
PhoneMail.apk
QQ2011.apk
Renren_FSplugin.apk
Renren_GLRplugin.apk
SinaMusic.apk
Sina_Weibo_FSPlugin.apk
Sina_Weibo_GLRplugin.apk
SohuNews.apk
VDisk.apk
Weibo.apk
eMoney.apk
mapbar.apk
renren.apk
unicomclient_HTCT328W.apk
vegetable.apk
wefound.apk
2. Then run “reboot” to reboot your phone.
3. After the reboot you might still find some Chinese language apps. These can be removed with an app from the Play Store such as Root Uninstaller.
by SeBsZ.
If you have any problems, please post below and I will answer and/or update this post.
Click to expand...
Click to collapse
I got trouble, after i root my phone. It is stick at the htc logo and os never loaded again, what shall i do now, pls help.
instructions applicable on the new upgrade:
Kernel: 3.0.16
Baseband: 1.05.34D.29_20.21.30.23U
Build number: 1.60.707.7
Browser: 534.30
thanks a lot OP
Hi
because there is new update from HTC available, 1.71.1402.1 I have question, how can I install this patch? because now I can't install on the cracked one.
PS.
on the second device (updated to 1.71.1402.1 before this crack) instruction working aswell
HTC Wind
So I purchased this phone from eBay, it came "unlocked" and I am able to use it in Canada easily. No problems with Google Apps, english, etc.
I don't know if this is a rooted unlock or a hardware carrier unlock.
So, with HTC now telling me there are system updates available, I don't know whether installing them will lock the phone up if it's been rooted. I've written the seller a few times and despite very many positive reviews, I have no answer to this question. So I'm posting here.
I have:
Android 4.0.3
HTC Sense v. 4
Software 1.60.707.5
HTC SDK API level 4.2
HTCEtension_403_1_GA_8
kernel
3.0 16-g320e2d4-dirty
[email protected] #1
PREEMPT
baseband
1.05.34D.29_20.21.30.23U
build number
1.60.707.5 CL69250 release-keys
browser version
WebKit/534.30
Any help here would be appreciated.
Many thanks in advance.
asteroidboy said:
So I purchased this phone from eBay, it came "unlocked" and I am able to use it in Canada easily. No problems with Google Apps, english, etc.
I don't know if this is a rooted unlock or a hardware carrier unlock.
So, with HTC now telling me there are system updates available, I don't know whether installing them will lock the phone up if it's been rooted. I've written the seller a few times and despite very many positive reviews, I have no answer to this question. So I'm posting here.
I have:
Android 4.0.3
HTC Sense v. 4
Software 1.60.707.5
HTC SDK API level 4.2
HTCEtension_403_1_GA_8
kernel
3.0 16-g320e2d4-dirty
[email protected] #1
PREEMPT
baseband
1.05.34D.29_20.21.30.23U
build number
1.60.707.5 CL69250 release-keys
browser version
WebKit/534.30
Any help here would be appreciated.
Many thanks in advance.
Click to expand...
Click to collapse
As your baseband matches the build number it would suggest that you have an original Asia version. You should be able to use the OTA update without problems. If when you run the update it says something about "HTC has detected that the software is not original" then you probably have a Chinese model that has Asia firmware on it.
Unable to stay login to HTCDev
I recently got a Desire V and wants to root it.
Not sure if any of you faces this problem..I have registered at HTCDev and followed the instruction to click on the email link to complete registration. However each time when I successfully log in, I am being thrown out and I need to re-login. Sometimes I am able to succesfully log in to the bootloader section and then am able to select the model and go through the legal notification. But after that Im always thrown out.
Is anyone facing this? I have registered for another id and its the same thing.
Need a HUGE favor...is it possible for someone who has registered successfully and unlocked their bootloader to lend me their userid?? Desperately trying to root this phone. Thanks.
Hello, it seems that the link for the files does not work anymore. Would somebody able to share these files ?
Best regards

Symphony w25 / ktouch w650 / mobistar s01 / karbonn a7 ICS Upgrade tutorial.

Always remember to BACKUP your SYSTEMs NANDROID BACKUP with CWM. * I am really not responsible for any damage to your phone; it’s all upon your responsibility. *Let me know if any edit is recommended by you.
Full tutorial is also available on my blog : iamrainwalker
Ahh! I love my ICS rom and my symphony w25. I am a perfectionist, so I took my time to study and gone throw lots of trials and errors to finalize the ICS rom. Thanks to all those Brilliant senior developers from XDA for their numerous helps and tips. I will start by providing some screenshot of the ICS rom.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Beautiful isn’t it? Now let’s start. Just make sure you read and follow everything I say from now. Upgrading process is divided in 3 steps actually:
Updating Baseband
Flashing AP(Factory) ROM
Flashing Finalized NANDROID ROM.
YOU MUST FOLLOW ALL STEPS ONE BY ONE, DO NOT DO ANYTHING YOU DON’T KNOW, IF YOU ARE A TOTAL NEWBIE, THIS IS NOT FOR YOU KIDDO. DON’T BLAIM ME FOR YOUR MISTAKES.
ICS_Stable_sw25_rom Featurs :
Fully Rooted
Updated SU and Busybox binaries
Init.d Support, busybox runpart
App2SD enabled
Super Fast
All Sensors working
Better Battery Life
Better Network Reception
ALL new Jelly Bean keyboard
Cracked PowerAmp Music Player
Added
And many other tweaks I can’t remember right now.
* Points to be noted
You need to enable or disable Gsensor from Settings > Display by your self, Status ber shortcut don’t work.
You need to set APN manually from Settings > More > Mobile Networks > Select Subscription > Manage Card
System is already configured for Bangladeshi Users.
Download all Files Listed below :
AP_BP_FOR_ICS_S01
o (AP+BP)_ICS_S01.7z.001 – http://www.mediafire.com/?5v5qkcd4viag8vi
o (AP+BP)_ICS_S01.7z.002 – http://www.mediafire.com/?mahtazx3jrbprtr
ASDK_Files
o installer_r20.0.3-windows.exe – http://www.mediafire.com/?p57ix4v80c3yf8f
o jdk-7-windows-i586.exe – http://www.mediafire.com/?rejrjk6rjjbq5d9
Drivers
o S01_Drivers.7z – http://www.mediafire.com/?wjhalczqtg7k1c1
S01_Flash_tools
o S01_flash_tools.7z – http://www.mediafire.com/?6mzx0bqrd6oubo7
Symphony_ICS_stable_1
o clockworkmod_rainwalker.7z.001 – http://www.mediafire.com/?uzw25cq5bk1omn4
o clockworkmod_rainwalker.7z.002 – http://www.mediafire.com/?242vkhkfi3noekc
CWM for S01
o CWM-English.rar – http://www.mediafire.com/?y0e31h55qurp3y7
7zip
o http://www.7-zip.org/
File Extraction :
Download all files in a folder like this location “F:\sym_ics\SYMICS4\”
Select files like this photo and Use 7zip to Extract.
Make use you have folders Extracted like this
Updating Baseband :
This process is pretty nasty. I made a successful Update after trying a number of times and fails, after that I installed WINDOWS XP SP3 and successfully Updated Baseband. So I would recommend you guys to Start this Upgrading Process with a Freshly Installed Windows XP. I will try to give you as much as possible visual guide.
*It is not mandatory to install Android SDK and Java Runtime.
Install “jdk-7-windows-i586.exe”
Install “installer_r20.0.3-windows.exe” , make sure you have selected options red marked in this photo when Android SDK download files.
After download complete, Go to “F:\sym_ics\SYMICS4\(AP+BP)_ICS_S01\(AP+BP)_ICS_S01\ICS_S01” This folder.
Extract “NPRG7627A.zip” by right clicking it 7-zip > Extract Here
Copy “NPRG7627A.hex” to “591357_8376_WCDMA_V0005” folder.
Switch off your phone, remove battery, SIM cards, SD card.
Place battery on your phone, Hold POWER BUTTON+VOLUME DOWN BUTTON together, you will see “QPST Entry Download”.
Now, Connect your phone to your pc.
You will see a popup like this, cancel it.
Go to your device manager and follow the procedure below :
For you the driver location will be “F:\sym_ics\SYMICS4\S01_Drivers\drivers\Driver\HK11-VB717-27\HK11-VB717-27_1.0.56\Win32\x86\free”, Click Ok, and press Next. Driver will be installed. Close it. Go to device manager and you will see something like this :
In my case i got COM3, you may have diffrent port number. Now go to “F:\sym_ics\SYMICS4\S01_flash_tools\fast_boot” and Open “fastboot1.0.2.4.exe”. You will see something like this :
Click on “BP Browse” select folder “F:\sym_ics\SYMICS4\(AP+BP)_ICS_S01\(AP+BP)_ICS_S01\ICS_S01\591357_8376_WCDMA_V0005″, Put the port number on “BP Port”, take a deep breath and press Download, download should start if everthing is allright, after download compleate “fastboot1.0.2.4.exe” will close by itself. and you need to pull your phone bettery to shut it down and disconnect the phone form your pc.
AP Upload :
Place your phone battery on the phone, press POWER BUTTON + VOLUME UP and wait untill you see a GREEN display on your phone.
Connect you phone and you will see a new Device is found named Android, now install the drivers by following procedure like prevoiusly shown and use the folder “F:\sym_ics\SYMICS4\S01_Drivers\drivers\Driver\adb_driver” for drivers.
After driver instlation compleate, go to “F:\sym_ics\SYMICS4\S01_flash_tools\EMMC_AP” and open “QUALFAST2.0.4(Factory).exe”
Click on “SEL PATH” button and select “F:\sym_ics\SYMICS4\(AP+BP)_ICS_S01\(AP+BP)_ICS_S01\ICS_S01\TBW591357_9999_V0001_2″ folder click ok. you will see :
Now press “OK” and wait for first “Waiting Decices…” to compleate and then disconnect the phone, pull your battery and start your phone. ICS should start with creepy forign language.
Flashing Finalized Stable NANDROID ROM :
Default firmware rom do not come with CWM installed as recovery, so we need to port it now. This is a pretty simple procedure.
Download CWM-English.rar from This link : http://www.mediafire.com/?y0e31h55qurp3y7
Copy it to “F:\sym_ics\SYMICS4\”
Extract using 7-zip > Extract Here.
Shutdown your phone, insert your sim and sd card. Press POWER BUTTON + VOLUME UP button till the GREEN display appears.
Connect your phone with the pc.
Open Command prompt and type :cd F:\sym_ics\SYMICS4\CWM-English (press enter)Fastboot devices (press enter)
You should see something like “???????????? fastboot” Now type :fastboot boot recovery-english.img (press enter)
Wait sometime, CWM recovery should boot.
Now, from the menu, Select “wipe data/factory reset”
After finishing slect “wipe cache partition”
After that, go to “mount & Storage” > “Mount Usb Drive”
Now sd card will be mounted on your pc. Copy “F:\sym_ics\SYMICS4\clockworkmod_rainwalker\ clockworkmod” to your sd card.
Select “Unmount” from your phone. And Select “Go back”
Select “Backup and Restore”
Select “Restore”
Select “ICS_W25_Stable” and confirm, wait for restore to complete, then reboot.
Yah! You are now on ISC stable. Enjoy.
Helpful Links :
Driver Installation Video : https://vimeo.com/55837968
Another Baseband Update Guide : http://forum.xda-developers.com/showthread.php?t=2036053
XDA foram Thread : http://forum.xda-developers.com/showthread.php?t=1788936
Rooting Symphony w25 : http://forum.xda-developers.com/showthread.php?t=1818146
Thanks From the deepest corner of my heart to :
prasad12ka4 , ahmed.zunaid , vinodkbishnoi (for poviding stability of the rom) & all tose person who helped me for this achivement
rainwalker said:
Always remember to BACKUP your SYSTEMs NANDROID BACKUP with CWM. * I am really not responsible for any damage to your phone; it’s all upon your responsibility. *Let me know if any edit is recommended by you.
Full tutorial is also available on my blog : iamrainwalker
Ahh! I love my ICS rom and my symphony w25. I am a perfectionist, so I took my time to study and gone throw lots of trials and errors to finalize the ICS rom. Thanks to all those Brilliant senior developers from XDA for their numerous helps and tips. I will start by providing some screenshot of the ICS rom.
Beautiful isn’t it? Now let’s start. Just make sure you read and follow everything I say from now. Upgrading process is divided in 3 steps actually:
Updating Baseband
Flashing AP(Factory) ROM
Flashing Finalized NANDROID ROM.
YOU MUST FOLLOW ALL STEPS ONE BY ONE, DO NOT DO ANYTHING YOU DON’T KNOW, IF YOU ARE A TOTAL NEWBIE, THIS IS NOT FOR YOU KIDDO. DON’T BLAIM ME FOR YOUR MISTAKES.
ICS_Stable_sw25_rom Featurs :
Fully Rooted
Updated SU and Busybox binaries
Init.d Support, busybox runpart
App2SD enabled
Super Fast
All Sensors working
Better Battery Life
Better Network Reception
ALL new Jelly Bean keyboard
Cracked PowerAmp Music Player
Added
And many other tweaks I can’t remember right now.
* Points to be noted
You need to enable or disable Gsensor from Settings > Display by your self, Status ber shortcut don’t work.
You need to set APN manually from Settings > More > Mobile Networks > Select Subscription > Manage Card
System is already configured for Bangladeshi Users.
Download all Files Listed below :
AP_BP_FOR_ICS_S01
o (AP+BP)_ICS_S01.7z.001 – http://www.mediafire.com/?5v5qkcd4viag8vi
o (AP+BP)_ICS_S01.7z.002 – http://www.mediafire.com/?mahtazx3jrbprtr
ASDK_Files
o installer_r20.0.3-windows.exe – http://www.mediafire.com/?p57ix4v80c3yf8f
o jdk-7-windows-i586.exe – http://www.mediafire.com/?rejrjk6rjjbq5d9
Drivers
o S01_Drivers.7z – http://www.mediafire.com/?wjhalczqtg7k1c1
S01_Flash_tools
o S01_flash_tools.7z – http://www.mediafire.com/?6mzx0bqrd6oubo7
Symphony_ICS_stable_1
o clockworkmod_rainwalker.7z.001 – http://www.mediafire.com/?uzw25cq5bk1omn4
o clockworkmod_rainwalker.7z.002 – http://www.mediafire.com/?242vkhkfi3noekc
CWM for S01
o CWM-English.rar – http://www.mediafire.com/?y0e31h55qurp3y7
7zip
o http://www.7-zip.org/
File Extraction :
Download all files in a folder like this location “F:\sym_ics\SYMICS4\”
Select files like this photo and Use 7zip to Extract.
Make use you have folders Extracted like this
Updating Baseband :
This process is pretty nasty. I made a successful Update after trying a number of times and fails, after that I installed WINDOWS XP SP3 and successfully Updated Baseband. So I would recommend you guys to Start this Upgrading Process with a Freshly Installed Windows XP. I will try to give you as much as possible visual guide.
*It is not mandatory to install Android SDK and Java Runtime.
Install “jdk-7-windows-i586.exe”
Install “installer_r20.0.3-windows.exe” , make sure you have selected options red marked in this photo when Android SDK download files.
After download complete, Go to “F:\sym_ics\SYMICS4\(AP+BP)_ICS_S01\(AP+BP)_ICS_S01\ICS_S01” This folder.
Extract “NPRG7627A.zip” by right clicking it 7-zip > Extract Here
Copy “NPRG7627A.hex” to “591357_8376_WCDMA_V0005” folder.
Switch off your phone, remove battery, SIM cards, SD card.
Place battery on your phone, Hold POWER BUTTON+VOLUME DOWN BUTTON together, you will see “QPST Entry Download”.
Now, Connect your phone to your pc.
You will see a popup like this, cancel it.
Go to your device manager and follow the procedure below :
For you the driver location will be “F:\sym_ics\SYMICS4\S01_Drivers\drivers\Driver\HK11-VB717-27\HK11-VB717-27_1.0.56\Win32\x86\free”, Click Ok, and press Next. Driver will be installed. Close it. Go to device manager and you will see something like this :
In my case i got COM3, you may have diffrent port number. Now go to “F:\sym_ics\SYMICS4\S01_flash_tools\fast_boot” and Open “fastboot1.0.2.4.exe”. You will see something like this :
Click on “BP Browse” select folder “F:\sym_ics\SYMICS4\(AP+BP)_ICS_S01\(AP+BP)_ICS_S01\ICS_S01\591357_8376_WCDMA_V0005″, Put the port number on “BP Port”, take a deep breath and press Download, download should start if everthing is allright, after download compleate “fastboot1.0.2.4.exe” will close by itself. and you need to pull your phone bettery to shut it down and disconnect the phone form your pc.
AP Upload :
Place your phone battery on the phone, press POWER BUTTON + VOLUME UP and wait untill you see a GREEN display on your phone.
Connect you phone and you will see a new Device is found named Android, now install the drivers by following procedure like prevoiusly shown and use the folder “F:\sym_ics\SYMICS4\S01_Drivers\drivers\Driver\adb_driver” for drivers.
After driver instlation compleate, go to “F:\sym_ics\SYMICS4\S01_flash_tools\EMMC_AP” and open “QUALFAST2.0.4(Factory).exe”
Click on “SEL PATH” button and select “F:\sym_ics\SYMICS4\(AP+BP)_ICS_S01\(AP+BP)_ICS_S01\ICS_S01\TBW591357_9999_V0001_2″ folder click ok. you will see :
Now press “OK” and wait for first “Waiting Decices…” to compleate and then disconnect the phone, pull your battery and start your phone. ICS should start with creepy forign language.
Flashing Finalized Stable NANDROID ROM :
Default firmware rom do not come with CWM installed as recovery, so we need to port it now. This is a pretty simple procedure.
Download CWM-English.rar from This link : http://www.mediafire.com/?y0e31h55qurp3y7
Copy it to “F:\sym_ics\SYMICS4\”
Extract using 7-zip > Extract Here.
Shutdown your phone, insert your sim and sd card. Press POWER BUTTON + VOLUME UP button till the GREEN display appears.
Connect your phone with the pc.
Open Command prompt and type :cd F:\sym_ics\SYMICS4\CWM-English (press enter)Fastboot devices (press enter)
You should see something like “???????????? fastboot” Now type :fastboot boot recovery-english.img (press enter)
Wait sometime, CWM recovery should boot.
Now, from the menu, Select “wipe data/factory reset”
After finishing slect “wipe cache partition”
After that, go to “mount & Storage” > “Mount Usb Drive”
Now sd card will be mounted on your pc. Copy “F:\sym_ics\SYMICS4\clockworkmod_rainwalker\ clockworkmod” to your sd card.
Select “Unmount” from your phone. And Select “Go back”
Select “Backup and Restore”
Select “Restore”
Select “ICS_W25_Stable” and confirm, wait for restore to complete, then reboot.
Yah! You are now on ISC stable. Enjoy.
Helpful Links :
Driver Installation Video : https://vimeo.com/55837968
Another Baseband Update Guide : http://forum.xda-developers.com/showthread.php?t=2036053
XDA foram Thread : http://forum.xda-developers.com/showthread.php?t=1788936
Rooting Symphony w25 : http://forum.xda-developers.com/showthread.php?t=1818146
Thanks From the deepest corner of my heart to :
prasad12ka4 , ahmed.zunaid , vinodkbishnoi (for poviding stability of the rom) & all tose person who helped me for this achivement
Click to expand...
Click to collapse
Thx for your hardwork but plz remove power amp
Its a paid app and adding it into a rom is against forum rules.
You may banned for this if moderator would see.
Sent from my Spice Mi-355 using xda app-developers app
rjunraj said:
Thx for your hardwork but plz remove power amp
Its a paid app and adding it into a rom is against forum rules.
You may banned for this if moderator would see.
Sent from my Spice Mi-355 using xda app-developers app
Click to expand...
Click to collapse
Thank you for letting me know, i will remember this at my next releases.
splash.img - change
Hello Rainwalker, Thank you for this thread, I have updated ICS in my W25. But I want to know, Is there any chance to replace/change "Mobistar" boot splash image. if would please let us know. thanks again for you hard work.
raj_onu said:
Hello Rainwalker, Thank you for this thread, I have updated ICS in my W25. But I want to know, Is there any chance to replace/change "Mobistar" boot splash image. if would please let us know. thanks again for you hard work.
Click to expand...
Click to collapse
Yes, it is possible, my new rom will have a new splash image. i will post a procedure about changing spalsh image soon.
rainwalker said:
Yes, it is possible, my new rom will have a new splash image. i will post a procedure about changing spalsh image soon.
Click to expand...
Click to collapse
Thanks, I will be waiting for that..
I have a big problem in this part:
Now press “OK” and wait for first “Waiting Decices…” to compleate and then disconnect the phone, pull your battery and start your phone. ICS should start with creepy forign language.
something go wrong and dont complete the action so the result is now even if a try start from dyhe begin dont work now give error im step to download....and can do anything more...
Can you help me please...
Thanks
I already try to get in bootloader green screen and after red to put a normal rom but broken in red dont go more than that....
sfmteixeira said:
I have a big problem in this part:
Now press “OK” and wait for first “Waiting Decices…” to compleate and then disconnect the phone, pull your battery and start your phone. ICS should start with creepy forign language.
something go wrong and dont complete the action so the result is now even if a try start from dyhe begin dont work now give error im step to download....and can do anything more...
Can you help me please...
Thanks
I already try to get in bootloader green screen and after red to put a normal rom but broken in red dont go more than that....
Click to expand...
Click to collapse
It would be great if you can send me a screenshot. i need to know what error exactly occurs? and what os do you use?
Problem starts here
Connect you phone and you will see a new Device is found named Android, now install the drivers by following procedure like prevoiusly shown and use the folder “F:\sym_ics\SYMICS4\S01_Drivers\drivers\Driver\adb _driver” for drivers.
After driver instlation compleate, go to “F:\sym_ics\SYMICS4\S01_flash_tools\EMMC_AP” and open “QUALFAST2.0.4(Factory).exe”
The device says is not possible to install before i even put the drivers dont reconice any android device and than in the upload starts ok but in the firt step of getting device give error.
After that i try make all again but dont be able to make download and nothing more in the steps you said.
Sorry and thanks for help
sfmteixeira said:
Problem starts here
Connect you phone and you will see a new Device is found named Android, now install the drivers by following procedure like prevoiusly shown and use the folder “F:\sym_ics\SYMICS4\S01_Drivers\drivers\Driver\adb _driver” for drivers.
After driver instlation compleate, go to “F:\sym_ics\SYMICS4\S01_flash_tools\EMMC_AP” and open “QUALFAST2.0.4(Factory).exe”
The device says is not possible to install before i even put the drivers dont reconice any android device and than in the upload starts ok but in the firt step of getting device give error.
After that i try make all again but dont be able to make download and nothing more in the steps you said.
Sorry and thanks for help
Click to expand...
Click to collapse
which operating system do you use? did your BP download was successful? try rebooting your computer the get into fastboot mod on your phone, connect your phone to computer, if you don't see anything then go and see in device manager, if you see there are some yellow unrecognized devices then install them.
I use seven! If i enter in fastboot (green) apear unkow device only and i already try the drivers you oput but nothing happen! I have another pc with 8 do you think if a do all steps can result?
---------- Post added at 05:15 AM ---------- Previous post was at 05:08 AM ----------
If a tur on my phone normaly apearce your logo and stay stock....but the pc recognice as Android as Android composite ADB Interface....
Finally i was able in other pc but there is a problem!
This part i cant do it
Flashing Finalized Stable NANDROID ROM :
Default firmware rom do not come with CWM installed as recovery, so we need to port it now. This is a pretty simple procedure.
Download CWM-English.rar from This link : http://www.mediafire.com/?y0e31h55qurp3y7
Copy it to “F:\sym_ics\SYMICS4\”
Extract using 7-zip > Extract Here.
Shutdown your phone, insert your sim and sd card. Press POWER BUTTON + VOLUME UP button till the GREEN display appears.
Connect your phone with the pc.
Open Command prompt and type :cd F:\sym_ics\SYMICS4\CWM-English (press enter)Fastboot devices (press enter)
You should see something like “???????????? fastboot” Now type :fastboot boot recovery-english.img (press enter)
Wait sometime, CWM recovery should boot.
Now, from the menu, Select “wipe data/factory reset”
After finishing slect “wipe cache partition”
After that, go to “mount & Storage” > “Mount Usb Drive”
Now sd card will be mounted on your pc. Copy “F:\sym_ics\SYMICS4\clockworkmod_rainwalker\ clockworkmod” to your sd card.
Select “Unmount” from your phone. And Select “Go back”
Select “Backup and Restore”
Select “Restore”
Select “ICS_W25_Stable” and confirm, wait for restore to complete, then reboot.
Yah! You are now on ISC stable. Enjoy.
How can i do for have root and make the recovery you said to have a stable ICS?
Because im not superuser, i dont have portuguese language and im not able to configure the apn for have internet in the phone!
Sorry again but if you can help!
Thanks a lot
Regards
you dont need to be a superuser to flah cwm. flash cwm by following the procedure i have wrote. then flash the clockworkmod file. u just need to flash cwm. i have already posted my new update on this rom. see my blogs latest post.
Sent from my Symphony W25
rainwalker said:
you dont need to be a superuser to flah cwm. flash cwm by following the procedure i have wrote. then flash the clockworkmod file. u just need to flash cwm. i have already posted my new update on this rom. see my blogs latest post.
Sent from my Symphony W25
Click to expand...
Click to collapse
I already try do step by step all you said...but the last i was not able so i do this:
Install room manager and make Select “Restore”
Select “ICS_W25_Stable and all ok!
But i still with same problems:
Only English language dont have portugese
And the CWM recovery i think is with problems:
Because dont have all the things
Apearce like this:
Android system recovery (3e)
rebbot system now
apply update from external store
wipe data/factory reset
wipe cache partition
apply update from cache
and no more funcions as you show in your images
I think some goes wrong in this part thats why i can put any more rom
Sorry again but please help me
sfmteixeira said:
I already try do step by step all you said...but the last i was not able so i do this:
Install room manager and make Select “Restore”
Select “ICS_W25_Stable and all ok!
But i still with same problems:
Only English language dont have portugese
And the CWM recovery i think is with problems:
Because dont have all the things
Apearce like this:
Android system recovery (3e)
rebbot system now
apply update from external store
wipe data/factory reset
wipe cache partition
apply update from cache
and no more funcions as you show in your images
I think some goes wrong in this part thats why i can put any more rom
Sorry again but please help me
Click to expand...
Click to collapse
CWM is Clockworkmod Recovery, it's a recovery replacement of stock recovery. the procedure is told is how to install CWM by replacing Stock recovery, if you have successfully flashed "ICS_W25_Stable" you already should have CWM on your system. try by pressing VOL UP + Power and hold untill Red display showes up. I am sorry i can't help you with Language support. But if you don't install CWM on your system then you wont be able to update new roms.
rainwalker said:
CWM is Clockworkmod Recovery, it's a recovery replacement of stock recovery. the procedure is told is how to install CWM by replacing Stock recovery, if you have successfully flashed "ICS_W25_Stable" you already should have CWM on your system. try by pressing VOL UP + Power and hold untill Red display showes up. I am sorry i can't help you with Language support. But if you don't install CWM on your system then you wont be able to update new roms.
Click to expand...
Click to collapse
I do all steps you said all goes ok! Only the step to make download in flash starts and then gives error, but after all steps ok! Bur the recovery stills the same the normal recovery with 5 option i said before!
The only way i put the "ICS_W25_Stable" it was from the rom manager i installed...
I dont understand what is happen...
Sd card space running out
hi,
i did everything like you posted.
using the rom since 3-4 days.
i have some issues.
1) internal memory is always low.i do not have anyrhing installed .(21 mb free)
2) when i try to download an app from play store,it says that sd cars apace running out and the download fails.
3) i have link2sd and 1gb ext2 partiotin in sd card. total sd size is 8 gb. 1.2 gb is empty at the moment.
pls give me a solution for this.
i really like the rom.
great battery performance.
if you could help me with the memory issue,then it will be awesome.
thanx
Pritesh.mohan said:
hi,
i did everything like you posted.
using the rom since 3-4 days.
i have some issues.
1) internal memory is always low.i do not have anyrhing installed .(21 mb free)
2) when i try to download an app from play store,it says that sd cars apace running out and the download fails.
3) i have link2sd and 1gb ext2 partiotin in sd card. total sd size is 8 gb. 1.2 gb is empty at the moment.
pls give me a solution for this.
i really like the rom.
great battery performance.
if you could help me with the memory issue,then it will be awesome.
thanx
Click to expand...
Click to collapse
Reset To factory settings, then start using link2sd. internal memory shows low because of preinstalled apps. you can use my 3rd updated rom "OPSHORA". this one is best. i personally use this rom. but you need to follow all procedures step by step. but you don't need to update Baseband again. OPSHORA rom has some Blue screen issue sometime, but removeing your battery will fix it.
Headphone Sound Problem
Hi Rainwalker, I have an problem with headphone sound. When I playing a song, normally it's ok but, after plugin headphone, headphone sound is too poor. Please help me out of this issue.
raj_onu said:
Hi Rainwalker, I have an problem with headphone sound. When I playing a song, normally it's ok but, after plugin headphone, headphone sound is too poor. Please help me out of this issue.
Click to expand...
Click to collapse
which music application do you use? chk sound settings, and equalizer settings.

Categories

Resources