Hello,
First of all treat me as a noob, as I am kinda one
I have a Galaxy note II, which I changed the Kernell so it would assume the SD card as internal memory, sd card broke down.
I came out with a malfunctioning phone that doesn't boot.
Trying to solve it, I tried to flash the stock firmware and kernell, but it didn't work, probably I chose the wrong one.
Can somebody tell which one do I need to flash and where to find it?
Model: GT- N7100
I bought my phone in Spain and the network provider was vodafone, just in case you need to know it
If you need any other details just ask,
Ty in advance.
Psaleao said:
Hello,
First of all treat me as a noob, as I am kinda one
I have a Galaxy note II, which I changed the Kernell so it would assume the SD card as internal memory, sd card broke down.
I came out with a malfunctioning phone that doesn't boot.
Trying to solve it, I tried to flash the stock firmware and kernell, but it didn't work, probably I chose the wrong one.
Can somebody tell which one do I need to flash and where to find it?
Model: GT- N7100
I bought my phone in Spain and the network provider was vodafone, just in case you need to know it
If you need any other details just ask,
Ty in advance.
Click to expand...
Click to collapse
\go to sammobile, download your firmware and flash
yaro666 said:
\go to sammobile, download your firmware and flash
Click to expand...
Click to collapse
Hey!
I've done that and still doesn't work, I think I am not choosing the right firmware to download, how exactly can I identify it?
Thanks in advance,
check under device info., but you should hhave international n7100, so you can flash eu roms.
There should be one for your country.
yaro666 said:
check under device info., but you should hhave international n7100, so you can flash eu roms.
There should be one for your country.
Click to expand...
Click to collapse
Where can I find device info? Can't switch it on? get's stuck on boot.
under the battery I can see model : GT-N7100
Psaleao said:
Where can I find device info? Can't switch it on? get's stuck on boot.
under the battery I can see model : GT-N7100
Click to expand...
Click to collapse
I found on samobile my country and network supplier, but there are all this versions available, don't know which to choose.
Date Country/Carrier Version PDA CSC Kies
2014-06-20 Spain (Vodafone) 4.3 N7100XXUEMK9 N7100VFGEMK4 NO
2014-06-20 Spain (Vodafone) 4.4.2 N7100XXUFNE1 N7100VFGFNE2 YES
2013-05-20 Spain (Vodafone) N7100XXDMC3 N7100VFGDMD1 NO
2013-02-28 Spain (Vodafone) N7100XXDMB2 N7100VFGDMA1 NO
2012-12-28 Spain (Vodafone) N7100XXDLL4 N7100VFGDLL2 NO
2012-10-10 Spain (Vodafone) N7100XXALIJ N7100VFGALIC NO
Psaleao said:
I found on samobile my country and network supplier, but there are all this versions available, don't know which to choose.
Date Country/Carrier Version PDA CSC Kies
2014-06-20 Spain (Vodafone) 4.3 N7100XXUEMK9 N7100VFGEMK4 NO
2014-06-20 Spain (Vodafone) 4.4.2 N7100XXUFNE1 N7100VFGFNE2 YES
2013-05-20 Spain (Vodafone) N7100XXDMC3 N7100VFGDMD1 NO
2013-02-28 Spain (Vodafone) N7100XXDMB2 N7100VFGDMA1 NO
2012-12-28 Spain (Vodafone) N7100XXDLL4 N7100VFGDLL2 NO
2012-10-10 Spain (Vodafone) N7100XXALIJ N7100VFGALIC NO
Click to expand...
Click to collapse
Install 2'nd NE1 is the newest for Spain
Thank you! It worked fine!
Related
Hi everyone,
Got the above message on a Galaxy Y GT-S5360 in the UK.
Always just used it as an MP3 player so never used it to make calls, etc. Was running Jellyblast V3 previously (had no network on that either) but decided to return to stock and use the phone.
Flashed S5360_XXLA2_OXXLA2_XXLA2_by_Doky.zip via ODIN so now have the following:
PDA: S5360XXLA2
PHONE: S5360XXLA2
CSC: S5360XXLA2
Android version: 2.3.6
Baseband version: S5360XXLA2
I’ve looked on XDA and throughout the internet but can’t find an answer. I am probably making a silly mistake. Not had this problem before with a long time flashing on my S2
Any ideas?
Thank you
Tim
Maybe you don't have a sim card? Haha
From: Somewhere In Neverland
Timbop37 said:
Hi everyone,
Got the above message on a Galaxy Y GT-S5360 in the UK.
Always just used it as an MP3 player so never used it to make calls, etc. Was running Jellyblast V3 previously (had no network on that either) but decided to return to stock and use the phone.
Flashed S5360_XXLA2_OXXLA2_XXLA2_by_Doky.zip via ODIN so now have the following:
PDA: S5360XXLA2
PHONE: S5360XXLA2
CSC: S5360XXLA2
Android version: 2.3.6
Baseband version: S5360XXLA2
I’ve looked on XDA and throughout the internet but can’t find an answer. I am probably making a silly mistake. Not had this problem before with a long time flashing on my S2
Any ideas?
Thank you
Tim
Click to expand...
Click to collapse
flash the correct csc, also try the SIM on other mobile
SaketJoshi said:
flash the correct csc, also try the SIM on other mobile
Click to expand...
Click to collapse
Thanks for the reply. The SIM card is fine. Works on another phone. How do I know which is the correct CSC? I assumed the one that was flashed match the modem and PDA.
Thanks
Tim
Timbop37 said:
Thanks for the reply. The SIM card is fine. Works on another phone. How do I know which is the correct CSC? I assumed the one that was flashed match the modem and PDA.
Thanks
Tim
Click to expand...
Click to collapse
was the package you installed compatible with your country?
SaketJoshi said:
was the package you installed compatible with your country?
Click to expand...
Click to collapse
Yes. It appeared to be. One of the CSCs was for carphone warehouse (CPW) which is where the phone came from originally.
Thanks
Tim
Timbop37 said:
Yes. It appeared to be. One of the CSCs was for carphone warehouse (CPW) which is where the phone came from originally.
Thanks
Tim
Click to expand...
Click to collapse
S5360_XXLA2_OXXLA2_XXLA2
European multilanguage build.
based on: S5360XXLA2_S5360OXXLA2_RST_S5360XXLA2_HOME.tar.md5
ro.build.date=Wed Jan 11 13:58:09 KST 2012
Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)
Included CSCs: (Default is XEU)
ATO AUT COS CPW CYO CYV EIR EUR FOP ITV MOO PAN PHE SUW TPH XEF XEH XEO XEU XEZ XSK
After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
This build does not contains any provider specific bloatware.
is this the one you flashed? it says something you have to do after flashing. did you do that?
SaketJoshi said:
S5360_XXLA2_OXXLA2_XXLA2
European multilanguage build.
based on: S5360XXLA2_S5360OXXLA2_RST_S5360XXLA2_HOME.tar.md5
ro.build.date=Wed Jan 11 13:58:09 KST 2012
Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)
Included CSCs: (Default is XEU)
ATO AUT COS CPW CYO CYV EIR EUR FOP ITV MOO PAN PHE SUW TPH XEF XEH XEO XEU XEZ XSK
After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
This build does not contains any provider specific bloatware.
is this the one you flashed? it says something you have to do after flashing. did you do that?
Click to expand...
Click to collapse
Yes, I did. I tried with the default first for Europe (EUR) then CPW. It then rebooted to the Android setup screen but I still had no network.
Thanks for your help. I appreciate it.
Tim
Timbop37 said:
Yes, I did. I tried with the default first for Europe (EUR) then CPW. It then rebooted to the Android setup screen but I still had no network.
Thanks for your help. I appreciate it.
Tim
Click to expand...
Click to collapse
the correct method is *#272*imei#
p.s. you can get the imei by dialling *#06#
SaketJoshi said:
the correct method is *#272*imei#
p.s. you can get the imei by dialling *#06#
Click to expand...
Click to collapse
Tried it again using CPW, XEU and EUR, without success. I have used the correct method and entered the correct imei.
Regards
Tim
Timbop37 said:
Tried it again using CPW, XEU and EUR, without success. I have used the correct method and entered the correct imei.
Regards
Tim
Click to expand...
Click to collapse
where did you buy the phone? in uk or outside?
SaketJoshi said:
where did you buy the phone? in uk or outside?
Click to expand...
Click to collapse
My father-in-law got it from Carphone Warehouse in Chester in the UK about a year or so ago.
He used it for a while with an Orange PAYG SIM then gave it to me. I put another Orange SIM in it but never used it as a phone and flashed a custom ROM immediately. I played a lot of music on it and have been trying to get a network on it. I have tried the Orange SIM I put in it and also an O" PAYG SIM which I bought yesterday. Both show no network available, whatever I dial.
Thanks again
Tim
Timbop37 said:
My father-in-law got it from Carphone Warehouse in Chester in the UK about a year or so ago.
He used it for a while with an Orange PAYG SIM then gave it to me. I put another Orange SIM in it but never used it as a phone and flashed a custom ROM immediately. I played a lot of music on it and have been trying to get a network on it. I have tried the Orange SIM I put in it and also an O" PAYG SIM which I bought yesterday. Both show no network available, whatever I dial.
Thanks again
Tim
Click to expand...
Click to collapse
well then contact the network customer service
Sir, Flash a good old stock firmware not the newests . Also try to change the kernel .
Sent from my GT-S5360 using Tapatalk 2
Its happening in europe all day, I cant get into detail but the Sun is whats causing it. Soft reboot/or flight mode ur phone couple times:sly:
Sent from my GT-S5360 using xda premium
hi, i have problem with display a want send my phone to repair center,
but a forgot oficial firmware location csc/pda and others
i have 3.oficial stock rom
Region: O2C (Czech Republic (O2C)) PDA: I9195XXUAMG4 Changelist: 1097013
O2C (Czech Republic (O2C)) PDA: I9195XXUAMF7 Changelist: 891972
TMZ (Czech Republic (T-Mobile)) PDA: I9195XXUAMF6 Changelist: 876741
samebody help witch rom flash to my phone ?
i have buy in alza.cz
Diego009 said:
hi, i have problem with display a want send my phone to repair center,
but a forgot oficial firmware location csc/pda and others
i have 3.oficial stock rom
Region: O2C (Czech Republic (O2C)) PDA: I9195XXUAMG4 Changelist: 1097013
O2C (Czech Republic (O2C)) PDA: I9195XXUAMF7 Changelist: 891972
TMZ (Czech Republic (T-Mobile)) PDA: I9195XXUAMF6 Changelist: 876741
samebody help witch rom flash to my phone ?
i have buy in alza.cz
Click to expand...
Click to collapse
Hi,
I personally bought in O2, so I am sure I have got I9195XXUAMG4. In order to get Cyanogenmod, I had to rooted it. Now I want to go completely back, original recovery and ROM, but did not find any guide for it
hy,
look on the box of mobile, is a code like GT-I9195ZKACOA for my case; then code for my region is COA;
if your region is O2C then flash I9195XXUAMG4 firmware
b0g said:
hy,
look on the box of mobile, is a code like GT-I9195ZKACOA for my case; then code for my region is COA;
if your region is O2C then flash I9195XXUAMG4 firmware
Click to expand...
Click to collapse
on box of mobile is nothig but this one
hy,
if you buy from www.alza.cz , i find in this site 4 models of samsung i9195:
GT-I9195ZKAETL, GT-I9195ZBAETL, GT-I9195ZRAETL and GT-I9195ZWAETL , all models has region ETL you can check your self;
now you check on http://www.sammobile.com/firmwares/2/ your firmware for ETL region and you will find
Latest firmware info
GT-I9195 Galaxy S4 mini LTE
PDA: I9195XXUAMG8
CSC: I9195OXXAMG4
MODEM: I9195XXUAMG8
Added: 2013-08-15
downloaded and flashed to your mobile, good luck
b0g said:
hy,
if you buy from www.alza.cz , i find in this site 4 models of samsung i9195:
GT-I9195ZKAETL, GT-I9195ZBAETL, GT-I9195ZRAETL and GT-I9195ZWAETL , all models has region ETL you can check your self;
now you check on http://www.sammobile.com/firmwares/2/ your firmware for ETL region and you will find
Latest firmware info
GT-I9195 Galaxy S4 mini LTE
PDA: I9195XXUAMG8
CSC: I9195OXXAMG4
MODEM: I9195XXUAMG8
Added: 2013-08-15
downloaded and flashed to your mobile, good luck
Click to expand...
Click to collapse
Yes, I believe he is right, because you should remember it when the phone starts, it shows O2 carrier blue screen... if you do not remember that, you definitely do not have O2C... the same with T-Mobile version.
boot loop
thanks for info , now i tried flashed with odin v3.07 in log odns: ok sucesfuly but after reboot phone
boot loop !
Diego009 said:
thanks for info , now i tried flashed with odin v3.07 in log odns: ok sucesfuly but after reboot phone
boot loop !
Click to expand...
Click to collapse
go to recovery, make full wipe data
przem00 said:
go to recovery, make full wipe data
Click to expand...
Click to collapse
its works thanks
Hi all
I purchased an i9195 lte from Kogan. It is an international phone and I want to flash it with an Australian version. There are no Branded or unbranded ROMs for the phone. is it possible to use the I9195T ROM on the international phone? I tried using ODIN to flash the phone with Telstra and XSA ROMS and it fails with a security failure message. I assume that ithe flashing process has some way of matching the ROM to the model number. From what I understand the Telstra and international version have the same specifications, with only difference being a larger battery.
If I can't use the i9195t rom, is there any way to change the CSC to Australia without having an Australian region ROM?
Any help much appreciated
dkw04058 said:
Hi all
I purchased an i9195 lte from Kogan. It is an international phone and I want to flash it with an Australian version. There are no Branded or unbranded ROMs for the phone. is it possible to use the I9195T ROM on the international phone? I tried using ODIN to flash the phone with Telstra and XSA ROMS and it fails with a security failure message. I assume that ithe flashing process has some way of matching the ROM to the model number. From what I understand the Telstra and international version have the same specifications, with only difference being a larger battery.
If I can't use the i9195t rom, is there any way to change the CSC to Australia without having an Australian region ROM?
Any help much appreciated
Click to expand...
Click to collapse
Hi
If You want help must give more data. What Rom have You installed, what Rom You want flash. If You type on phone keyboard *#1234# what data AP, CS, CSC You have.
ValenteL said:
Hi
If You want help must give more data. What Rom have You installed, what Rom You want flash. If You type on phone keyboard *#1234# what data AP, CS, CSC You have.
Click to expand...
Click to collapse
*#1234# for the current rom shows
AP I9195XXUAMH1
CP I9195XXUAMH1
CSC I9195OXXAMH3
The rom I want to install is (I9195TDVUAMH1_I9195TXSAAMH1_XSA)
AP I9195TDVUAMH1
CP I9195TDVUAMH1
CSC I9195TXSAAMH1
The main reason for the change is so that I can get NAVIGON which SAMSUNG provide free for Australian ROMs.
regards
Darren
Any solution?
Hey lad, So what did you do? I'm in a similar situation. Bought it from kogan also. Received the I9505T.. I want to flash an irish verion of the I9505 on this phone but not sure if it's allowed. How did it work out for you?
Regards, Eoghan.
Version Changelist
Currently: I9195TDVUAMH1 Android 4.2.2 01.08.2013 1266356
Want to put on: I9195XXUAMF5 Android 4.2.2 13.06.2013 870901
dkw04058 said:
*#1234# for the current rom shows
AP I9195XXUAMH1
CP I9195XXUAMH1
CSC I9195OXXAMH3
The rom I want to install is (I9195TDVUAMH1_I9195TXSAAMH1_XSA)
AP I9195TDVUAMH1
CP I9195TDVUAMH1
CSC I9195TXSAAMH1
The main reason for the change is so that I can get NAVIGON which SAMSUNG provide free for Australian ROMs.
regards
Darren
Click to expand...
Click to collapse
Hello from a newbie & sorry if this has been covered elsewhere, but I can't seem to find it anywhere for the 2014 edition.
I've bought a 32Gb LTE Note 10.1 2014 edition from Hong Kong and needless to say it comes with a heavily biased Chinese version of the operating system, now having read other fora, I have managed to understand how to flash the device using Odin, however I was after a UK (BTU) version of the rom, but what I have got is the Spanish one.
OK, I have no problem with it as I have changed all of the settings to use UK English, but I am looking for a way to change the CSC code to from PHE (Spanish) to BTU (UK) so that I can get any firmware updates for it.
The one thing I want to do is keep it as near to stock condition as possible, namely I don't want to root it (is that what it's called?).
Can someone please advise me how to do this please.
Thanks.
If you know how to flash the thing, just get a Spanish firmware from sammy mobile and flash it
I've also ordered a 605 from HK. I intend to flash this firmware.
I bought the P605 from Germany and it is unlocked but T Mobile branded. Can I flash the UK firmware ?
Thanks,
Halldor
Halldor said:
I bought the P605 from Germany and it is unlocked but T Mobile branded. Can I flash the UK firmware ?
Thanks,
Halldor
Click to expand...
Click to collapse
Sure
Gesendet von meinem GT-I9505 mit Tapatalk
@Ben81.
That despite it saying it's a BTU firmware isn't. It's the one I downloaded and is the Spanish one (PHE), I really do wish that those who provide these firmwares ensure that when they say it's from the UK it IS from the UK and when you do the flash it gives you the correct CSC code, when you plug it into Kies.
Thanks for the info. Will probably still flash that as it'll be better than the Chinese one!
EDIT: Installed it and can confirm it gives a PHE code.
Hello,
I seem to have a phone brought with wrong csc.
It is installed with greece cosmote firmware but it needs to be netherlands phn.
I was wondering if I can just flash to netherlands phn version so I will not lose time for switching phones.
Can you guys advice ?