Related
Hi, I make this thread to share with you a new version of Bootlogos for roms 4.4.3 and above, since all there are for 4.4.2 and lower. The problem with bootlogo used to remove 'Unlocked Warning' message in ROM 4.4.2 and lower is that do not work properly
Thank to @remo0073 for his contribution
remo0073 said:
I'm using this bootlogo for my Moto G XT1032 with Android 4.4.3 US but it's not "completely" OK
I try to explain
I found a difference between 4.4.2 firmware and 4.4.3 - 4.4.4 firmwares, regarding the stock bootlogo, when the bootloader is unlocked.
In 4.4.2 firmware, it is shown the "unlocked bootloader logo" when I start phone, I enter recovery and I charge the phone when it is off.
This fix replace the "unlocked bootloader logo" with the "Powered by Android" logo in all of these "situations".
In 4.4.3 - 4.4.4 firmwares, the boot logo "structure" is different.
It is shown the "unlocked bootloader logo" when I start phone and I enter recovery, but when I charge phone if it is off, it is shown the "Powered by Android" boot logo, even if the bootloader is unlocked.
For this reason, it happens that this "old" fix with new firmwares (4.4.3- 4.4.4) replace the "unlocked bootloader logo" with "Powered by Android" logo only when I start the phone or I reboot in recovery mode, but when I charge the phone when off, there is no bootlogo at all, only a vibration, dark screen and then charge animation.
It is possible to have a new bootlogo to adjust this issue?
(That is "Powered by Android" logo also for charging.)
Sorry for my poor english
Hope it is clear
Thanks in advance
Click to expand...
Click to collapse
ADD the file flashable by CWM or TWRP
Or can unzip it and flash it with flashtool with the command
fastboot flash logo logo_file_name
For GPE 4.4.4 ROM
ADDED CWM or TWRP Flashable images
logo.zip - GPE Moto G logo image without unlocked padlock and message “Powered by Android”
original_logo.zip - Original GPE Moto G logo with unlocked padlock
mod_logo.zip - GPE Moto G logo image with unlocked padlock and message “Powered by Android”
For GPE 5.0.1 ROM
ADDED CWM or TWRP Flashable images
logo.zip - GPE Moto G logo image without unlocked padlock and message “Powered by Android”
original_logo.zip - Original GPE Moto G logo with unlocked padlock
mod_logo.zip - GPE Moto G logo image with unlocked padlock and message “Powered by Android”
Can anyone share the boot logo for Android 5.0 ?
sohamray said:
Can anyone share the boot logo for Android 5.0 ?
Click to expand...
Click to collapse
This is for lollipop, extracted from the rom Retail BR
setrichard said:
ADDED CWM or TWRP Flashable images
logo.zip - GPE Moto G logo image without unlocked padlock and message “Powered by Android”
original_logo.zip - Original GPE Moto G logo with unlocked padlock
mod_logo.zip - GPE Moto G logo image with unlocked padlock and message “Powered by Android”
Click to expand...
Click to collapse
setrichard said:
ADDED CWM or TWRP Flashable images
logo.zip - GPE Moto G logo image without unlocked padlock and message “Powered by Android”
original_logo.zip - Original GPE Moto G logo with unlocked padlock
mod_logo.zip - GPE Moto G logo image with unlocked padlock and message “Powered by Android”
Click to expand...
Click to collapse
If possible, could you please add a bootlogo for GPE only with "Google" logo, no padlock, no "Powered by Android" message?
Something like this
remo0073 said:
If possible, could you please add a bootlogo for GPE only with "Google" logo, no padlock, no "Powered by Android" message?
Something like this
Click to expand...
Click to collapse
Hi, here it is, without lockpad and no message
setrichard said:
This is for lollipop, extracted from the rom Retail BR
Click to expand...
Click to collapse
Can anyone make this with a dark background please?
Inviato dal mio XT1032 utilizzando Tapatalk
I have philz touch recovery. Can logo.zip be flashed by this recovery
setrichard said:
Hi, here it is, without lockpad and no message
Click to expand...
Click to collapse
Thank you
It's ok on moto g gpe with Android Lollipop 5.0.1
Sent from my Moto G
sorry wrong post, delete my comment
setrichard said:
This is for lollipop, extracted from the rom Retail BR
Click to expand...
Click to collapse
@setrichard
It would be possible to have an alternative Lollipop bootlogo with "old Motorola globe" (KitKat version) and new "Powered by Android" logo (Lollipop version).
Thanks in advance
---------- Post added at 11:57 PM ---------- Previous post was at 11:56 PM ----------
Guru.Eclairs said:
I have philz touch recovery. Can logo.zip be flashed by this recovery
Click to expand...
Click to collapse
Yes
remo0073 said:
@setrichard
It would be possible to have an alternative Lollipop bootlogo with "old Motorola globe" (KitKat version) and new "Powered by Android" logo (Lollipop version).
Thanks in advance
Click to expand...
Click to collapse
Sorry for the delay, I have not had much free time.
Here is the modified logo
setrichard said:
Sorry for the delay, I have not had much free time.
Here is the modified logo
Click to expand...
Click to collapse
Thank you very much @setrichard !
I will install and report
Thanks.. It was really annoying
setrichard said:
Sorry for the delay, I have not had much free time.
Here is the modified logo
Click to expand...
Click to collapse
I have read the moto g forums, it seems the logo is primarily for falcon versions. Will this logo work for peregrine (aka Moto G LTE)?
@setrichard could you make a boot logo out of this.png file. It would be greatly appreciated!!
Sent from my Moto G using XDA Free mobile app
mmims24 said:
@setrichard could you make a boot logo out of this.png file. It would be greatly appreciated!!
Sent from my Moto G using XDA Free mobile app
Click to expand...
Click to collapse
for 5.0.2 or 4.4.4?
@setrichard I'm actually running 5.1.1
Moto G(XT1031) BlissPop v3.6
setrichard said:
Hi, I make this thread to share with you a new version of Bootlogos for roms 4.4.3 and above, since all there are for 4.4.2 and lower. The problem with bootlogo used to remove 'Unlocked Warning' message in ROM 4.4.2 and lower is that do not work properly
Thank to @remo0073 for his contribution
ADD the file flashable by CWM or TWRP
Or can unzip it and flash it with flashtool with the command
fastboot flash logo logo_file_name
Click to expand...
Click to collapse
Shouldn't "sol.jpg" be "sol.png" instead? is this image meant to replace the existing one?
Hello, does anyone have the official LG G3 poweron.ogg file? I have a LG G3 phone. However, I got the phone from Verizon so it does not have the LG boot sound.
gilberd said:
Hello, does anyone have the official LG G3 poweron.ogg file? I have a LG G3 phone. However, I got the phone from Verizon so it does not have the LG boot sound.
Click to expand...
Click to collapse
Here ya go: https://www.dropbox.com/s/6o0ychuz4v103ip/PowerOn.ogg?dl=0
Thank you very much.
Does anyone knows how to change Asus boot logo in zenfone 5 ?
(Note: I'm not talking about bootanimation, I'm talking about Asus boot logo which appears before bootanimation)
juyel92 said:
Does anyone knows how to change Asus boot logo in zenfone 5 ?
(Note: I'm not talking about bootanimation, I'm talking about Asus boot logo which appears before bootanimation)
Click to expand...
Click to collapse
Tried here > ?
https://forum.xda-developers.com/zenfone-5
timbernot said:
Tried here > ?
https://forum.xda-developers.com/zenfone-5
Click to expand...
Click to collapse
Already tried.... But no one knows how to change boot logo of zenfone 5. ?
juyel92 said:
Already tried.... But no one knows how to change boot logo of zenfone 5.
Click to expand...
Click to collapse
Ok , thanks
Hi, everyone!
I have created a custom boot logo for my new Cedric, since I despise Motorola's new branding (wish I could erase that "moto" text on the front...).
This is based on the Pixel's boot logo and animation, and it installs both. I have adapted the files found here for our device, and crafted a boot logo using Photoshop and Motorola Boot Logo Maker. Of course, this doesn't show the "N/A" text on unlocked bootloaders.
The bootanimation has been tested with Lineage OS. I don't know/care about the stock ROM, so you have to try.
Enjoy!
Really nice is it possible to have it also in black version?
Inviato dal mio Moto G5 utilizzando Tapatalk
masterdex said:
Really nice is it possible to have it also in black version?
Inviato dal mio Moto G5 utilizzando Tapatalk
Click to expand...
Click to collapse
It is possible, but it would show the "N/A" text that appears with unlocked bootloaders.
Ok when you have time and want to share it thanks.
Inviato dal mio Moto G5 utilizzando Tapatalk
Pls, make black version
Thanks. Is it TWRP flashable?
Shooting Star Max said:
Hi, everyone!
I have created a custom boot logo for my new Cedric, since I despise Motorola's new branding (wish I could erase that "moto" text on the front...).
This is based on the Pixel's boot logo and animation, and it installs both. I have adapted the files found here for our device, and crafted a boot logo using Photoshop and Motorola Boot Logo Maker. Of course, this doesn't show the "N/A" text on unlocked bootloaders.
The bootanimation has been tested with Lineage OS. I don't know/care about the stock ROM, so you have to try.
Enjoy!
Click to expand...
Click to collapse
spiritflare01 said:
Thanks. Is it TWRP flashable?
Click to expand...
Click to collapse
It's a .zip, I think it has to be flashed through TWRP
can i get just the boot logo without the animation?
Very nice logo
---------- Post added at 10:56 PM ---------- Previous post was at 10:56 PM ----------
salsaelpato said:
It's a .zip, I think it has to be flashed through TWRP
Click to expand...
Click to collapse
Yes flashed works tx
ShanePunk123 said:
can i get just the boot logo without the animation?
Click to expand...
Click to collapse
Yes, you can extract the logo.bin file from the .zip and flash it through fastboot commands
Thank you very much ! It worked for me on XT1672.
I've flashed it on TWRP.
I really hate motorola logo and introduction.
I love you.
What about the black version? It's so "white"
Hi everibody! I made my own splash logo and I want to share it with you (lavender). Hope you'll enjoy it!
Splash English
Splash Spanish
Thanks to @curoviyxru for making the splash logo editor ^^
https://forum.xda-developers.com/showpost.php?p=80043992&postcount=12
Hi - you can make a flashable img.file PLS ?!?
AllesMega said:
https://forum.xda-developers.com/showpost.php?p=80043992&postcount=12
Hi - you can make a flashable img.file PLS ?!?
Click to expand...
Click to collapse
I can't do it because redmi.bmp it's 7MB, max it's 6MB more less...
If you did it with photoshop please give .psd file or modify redmi.bmp
Hope JPG is ok ...
AllesMega said:
Hope JPG is ok ...
Click to expand...
Click to collapse
No, you need .bmp file, redmi and redmi_unlocked are more than 6MB, change it and you can do a splash logo
Found a splash screen and bootloader for PE users. This is for whyred but working on lavender. It a simple Google white one.
PS: Dont know who made it. Look on this link.
https://forum.xda-developers.com/attachment.php?attachmentid=4798629&d=1564358072
enzeruh said:
Found a splash screen and bootloader for PE users. This is for whyred but working on lavender. It a simple Google white one.
PS: Dont know who made it. Look on this link.
https://forum.xda-developers.com/attachment.php?attachmentid=4798629&d=1564358072
Click to expand...
Click to collapse
Any black version?
hajik2029 said:
Any black version?
Click to expand...
Click to collapse
I think i saw one but it is for rn6...try to look on their forums. You could reflash the stock REDMI logo if it turns black.
does bootloder work in your splash ?
X-ME said:
does bootloder work in your splash ?
Click to expand...
Click to collapse
It just changes Splash, if you unlock bootloader it will be unlocked, with or without splash screen changed.
I think you need unlocked bootloader to flash this.
Enviado desde mi RMX1971 mediante Tapatalk