Hi guys, I have an e986, and flashed a e980 4.4.3 Rom, everything works fine, except for the QRemote that I flashed (and Screen Mirrowing, I lost the option to do that after flashing, any help regarding that matter would also be appreciated).
So basically I flashed the qremote_e980.zip, and everything works fine, until I reboot, and then I have to add all the remotes that I had previously on to the device.. Any idea why this is happening? (I flashed the g3 remote before this one, and it didn't work.. I think I deleted every file from that flash before reflashing the e980 version).
Thanks in advance!
Related
Hi,
I'm using BeanStalk 4.3 and tried to flash the new 4.4 version. But unfortunately this kills my EMEI. Tried with several other 4.4 roms
but with the same result. Doing a recovery with backup of 4.3 works fine and EMEI is back again and the phone works perfectly.
Phone is Note 2 LTE (Vodafon)
What is going wrong? After flashing the rom and a new start there's a message that I have to insert my SIM-card correctly.
Anybody else having the same problem? Any solution known?
Thanks
Eckhard
Hi,
no one with an idea?
I'm wondering that each time I flash a 4.4 rom I don't have to unlock my SIM-card as it's protected.
Already tried TWRP but same result. Still using BeanStalk 4.3:crying:
Eckhard
Members,
Situation 1
TOT to ZVC - everything works properly
Successfully Installed TWRP through FreeGee
Took Backup of ZVC
Restored - No Boot
The phone would power on, stay at LG Logo and Notification LEDs would keep on blinking.
Flashed various ZVC Modems, but to no avail.
Situation 2
Clean Wipe
Flashed Stock Based 4.4 ROM
Flashed Modem
Heck, same as above. LG Logo with Notification LED blinking.
Now I understand maybe Autorec can be a solution, but I do not want to TOT again and lose all data.
The phone runs CM11, AOKP fine. It also runs ZVA based ROMs. It's ZVC that has gone for a toss.
Has someone been able to solve this?
Disillusioned said:
Members,
Situation 1
TOT to ZVC - everything works properly
Successfully Installed TWRP through FreeGee
Took Backup of ZVC
Restored - No Boot
The phone would power on, stay at LG Logo and Notification LEDs would keep on blinking.
Flashed various ZVC Modems, but to no avail.
Situation 2
Clean Wipe
Flashed Stock Based 4.4 ROM
Flashed Modem
Heck, same as above. LG Logo with Notification LED blinking.
Now I understand maybe Autorec can be a solution, but I do not want to TOT again and lose all data.
The phone runs CM11, AOKP fine. It also runs ZVA based ROMs. It's ZVC that has gone for a toss.
Has someone been able to solve this?
Click to expand...
Click to collapse
The developers are working on getting a stock rooted base working. There have been lots of hiccups.
They are knocking heads together to figure out what the problem is.
Sent from my LG-LS980 using Tapatalk
Any thread where this is being discussed?
Can occasionally see them chat on irc
Sent from my LG-LS980 using Tapatalk
Hi I pretty much know nothing about custom roms etc but I was forced to go for a custom ROM due to a friend wiping my phone but when I flashed Viper 3.2.1 everything was fine except the wifi button was greyed out, I also tried android revolution and the same problem occured. However it was fine when i tried candy5 but once i flashed google play the wifi stopped working again.
Does anyone know what the problem is and how i should fix it? thanks.
Hope you are on latest 4.4.4 firmware , link for the same should be in OP/FAQ of Viper.
fandam said:
Hi I pretty much know nothing about custom roms etc but I was forced to go for a custom ROM due to a friend wiping my phone but when I flashed Viper 3.2.1 everything was fine except the wifi button was greyed out, I also tried android revolution and the same problem occured. However it was fine when i tried candy5 but once i flashed google play the wifi stopped working again.
Does anyone know what the problem is and how i should fix it? thanks.
Click to expand...
Click to collapse
If you are only unlocked and not s-off you will need to manually flash the corresponding boot.img for each rom each time you flash a new rom. If you can get s-off you won't need to do this anymore.
Firmware needs to be updated. Confirmed on OP's other thread here: http://forum.xda-developers.com/htc-one-m8/help/htc-one-m8-bricked-t2989202/page2
Also its not necessary to manually extract and flash boot.img on the M8, even when s-on. Folks giving this advice may be carrying over knowledge from an older HTC device.
Dear friends
I would like you to help me out with the strange problem which encountered me this week. Here's the background: I bought Lg f180k (Korean version of Lg Optimus G) with a stock rom i.e Jelly bean 4.1.2. When i checked for updates OTA in phone settings i received a notification of firmware update. I clicked on update and the process started. Everything was normal till it rebooted as it came with a popup message saying "Device has been suspected to be rooted" and the update failed. Than i connected to the pc suite and put the phone in DL mode and start the process again on the pc. This time everything went normal and the phone updated successfully and rebooted. Here comes the main issue, When the phone rebooted after the successfully update the touch was not working at all. I touched every single area on the phone screen but nothing works. And i could see the interface of Kitkat firmware that means it was updated successfully. Please help me to find out the problem. My phones touch screen stop working when update to Kitkat. I restored to stock jelly bean and the phone is working flawlessly. I am really confused and i have searched everywhere but couldn't find this issue on the forum.
TIP: Phone is working perfectly on 4.1.2 stock rom.
When update to Kitkat 4.4, Touch screen stop working at all but the power button still works.
Thanking you in advance.
Seems like the update failed, I suggest flashing the latest KDZ using LG Flash Tool 2014. Try searching the forum for links to get KDZ and Flash Tool. Don't worry, you're lucky it didnt bootloop or get bricked.
ClarkOwen said:
Seems like the update failed, I suggest flashing the latest KDZ using LG Flash Tool 2014. Try searching the forum for links to get KDZ and Flash Tool. Don't worry, you're lucky it didnt bootloop or get bricked.
Click to expand...
Click to collapse
Thanks mate.... I tried the solution you told me but still the same. I used the latest KDZ file that is: f180k30c_00.kdz and Latest Lg flash tool 2014. Everything goes perfect with the upgradation process till reboot, No TOUCH on kitkat
I tried the sling custom rom (Sling_TJF_G_F180_v1.2.3_blueberry_29042014) and it works perfectly.
Please anyone help me to update it to Kitkat ....
[email protected]@li said:
Thanks mate.... I tried the solution you told me but still the same. I used the latest KDZ file that is: f180k30c_00.kdz and Latest Lg flash tool 2014. Everything goes perfect with the upgradation process till reboot, No TOUCH on kitkat
I tried the sling custom rom (Sling_TJF_G_F180_v1.2.3_blueberry_29042014) and it works perfectly.
Please anyone help me to update it to Kitkat ....
Click to expand...
Click to collapse
Have you solved the problem?
I suggest going into lower version of the firmware.
Try F180K 30b ?
Check on back to me, I want to know the out come as I am kinda doing it for my friend aswell
Hey
I tried every file of kitkat but nothing worked. Even i tried the custom sling rom for kitkat but encountered same problem. Everything goes perfect with the upgradation process but after reboot touch stop working at all. It seems like my phone typically doesn't support kitkat rom :-/ its strange. If you find any useful information kindly share with me. Currently i am using sling custom rom for jelly bean and its working flawlessly. Thanks
[email protected]@li said:
Hey
I tried every file of kitkat but nothing worked. Even i tried the custom sling rom for kitkat but encountered same problem. Everything goes perfect with the upgradation process but after reboot touch stop working at all. It seems like my phone typically doesn't support kitkat rom :-/ its strange. If you find any useful information kindly share with me. Currently i am using sling custom rom for jelly bean and its working flawlessly. Thanks
Click to expand...
Click to collapse
I have this problem too. Please sorry my bad English.
Hi there guys i bought the sprint g2 quite a while ago and have been dangling with roms for quite some time on it the problem that i'm sharing with you guys arised today.
I flashed the newest version of Resurrection Remix 5.4.6 on it and while it worked buttery smooth it had no sound whatsoever and couldn't auto-rotate so i flashed the lp baseband and zv8 modem on it to see if it remedies that, no solution, so i reverted it back to 5.4.5 with my nand backup, it worked fine until i found out i couldn't d2w when it was working flawlessly before so i flashed(foolishly) the kitkat baseband and this leads me to the problem i'm sharing with you people.
My phone is now stuck in a bootloop restarting to the lg screen again and again, giving me a secure boot error on download mode so i can't use the .tot and .dll stock files on it and i can't seem to get into hard factory reset so i can just get into twrp and flash the lp baseband again and relieve me of this nightmare it also gives me multiple windows drives with one accessible one with an image folder when i go to download mode
[EDIT] fixed it somehow got into recovery and flashed the lp modem, can a mod close this?