Related
So Friday i went to verizon and bought me a new LG G3 phone, 32G memory 3G RAM, you know the good **** LOL. Well when i got home i wanted to root the phone but when i looked it up there was many options, IOROOT, TowelRoot, and Stump Root. So i tried towel root on the phone but when i clicked the button towel root said my device isnt compatible and my phones build is the VS98510B. So at that point i decided to try IOROOT. When i launched the batch file i made sure i made myself a developer, got the proper drivers, made it connect via usb and set the phone connection to Ethernet. Well in the batch file it said everything was good and that i just needed to click any button to continue well i did that but when i clicked a button it simply closed the batch file. All i clicked was the space bar and it closed. Stump root isnt compatible and im afraid to use bruteforce mode. Any one got any help with this? Andriod Kitkat 4.4.2
Use the brut force method in stump. Takes about 5 minutes.
TonikJDK said:
Use the brut force method in stump. Takes about 5 minutes.
Click to expand...
Click to collapse
But i mean is it safe? Im kinda new to the whole android rooting scene i use to use iphones and **** so i dont wanna break this phone since i just got it
Worked for me and I have not seen a single report of any problems.
TonikJDK said:
Worked for me and I have not seen a single report of any problems.
Click to expand...
Click to collapse
So when i root it do i need to back up anything? Ive heard of whats called TWRP but idk what that is
I used stump root. My phones still works. You can't install twrp because bootloader is still locked, have to wait for a way to unlock it.
ToF_Itachi said:
So when i root it do i need to back up anything? Ive heard of whats called TWRP but idk what that is
Click to expand...
Click to collapse
Read a bit here TWRP is a recovery and backup software for when you flash a custom ROM.. You're not flashing any custom ROMs just yet.. So... I don't think you need to backup anything just yet. After you root the phone you can use TWRP to backup your current stock ROM .. Good luck ..
:good:
I used ioroot with no problems. Check out this vid, pretty straight fwd on what you need to do.
sent from my VZW VS985 aka LG G3
Showtek1980 said:
Read a bit here TWRP is a recovery and backup software for when you flash a custom ROM.. You're not flashing any custom ROMs just yet.. So... I don't think you need to backup anything just yet. After you root the phone you can use TWRP to backup your current stock ROM .. Good luck ..
:good:
Click to expand...
Click to collapse
Oh okay thanks! Well i guess im off to use the stump root and use brute force
R0ck.em 5ock.em said:
I used ioroot with no problems. Check out this vid, pretty straight fwd on what you need to do.
sent from my VZW VS985 aka LG G3
Click to expand...
Click to collapse
how were you able to use ioroot with yours? Like when i tried to use it it would just close the batch file and wouldnt even work when i tried it.
ToF_Itachi said:
Oh okay thanks! Well i guess im off to use the stump root and use brute force
Click to expand...
Click to collapse
My pleasure Hope you can find root using the desired software.. I'm in Korea..using the F400k but the latest update (v10l) couldn't find root using any of the available tools.. so.. I had to downgrade to the previous (v10g) and got root again. :victory:
Showtek1980 said:
My pleasure Hope you can find root using the desired software.. I'm in Korea..using the F400k but the latest update (v10l) couldn't find root using any of the available tools.. so.. I had to downgrade to the previous (v10g) and got root again. :victory:
Click to expand...
Click to collapse
Yeah im using the Verizon Vs985 v with the 10B version. so for me idk which way to go when it comes to rooting software
After you clicked to continue in the batch file, did yout phone boot into recovery?
sent from my VZW VS985 aka LG G3
ToF_Itachi said:
Yeah im using the Verizon Vs985 v with the 10B version. so for me idk which way to go when it comes to rooting software
Click to expand...
Click to collapse
This has ALWAYS worked well for me (Besides with the latest version update)... But I don't know if it would work on your device.. Try what you have. If all fails then give this a shot
R0ck.em 5ock.em said:
After you clicked to continue in the batch file, did yout phone boot into recovery?
sent from my VZW VS985 aka LG G3
Click to expand...
Click to collapse
no the batch file simply closed on me while my phone sat there still on the home screen
I have an ATT ZenFone 2E that I rooted successfully with this guide (http://forum.xda-developers.com/showthread.php?t=3116531). Due to an error on my part(fat finger) I accidentally started the OTA update. Now when I try to boot the phone all I get is the AT&T logo/splash screen. I can get it to go into recovery mode and it also will connect via ADB. I have tried flashing the UL-ASUS_Z00D-WW-12.16.5.30-user.zip firmware via ADB fastboot but I get an error saying firmware is wrong carrier ATT (WW). Am I using the wrong firmware for AT&T? I have searched all over and cannot find any ZenFone 2 firmware other than WW, TW, and CN. Any help or suggestions much appreciated.
JRSouth said:
I have an ATT ZenFone 2E that I rooted successfully with this guide (http://forum.xda-developers.com/showthread.php?t=3116531). Due to an error on my part(fat finger) I accidentally started the OTA update. Now when I try to boot the phone all I get is the AT&T logo/splash screen. I can get it to go into recovery mode and it also will connect via ADB. I have tried flashing the UL-ASUS_Z00D-WW-12.16.5.30-user.zip firmware via ADB fastboot but I get an error saying firmware is wrong carrier ATT (WW). Am I using the wrong firmware for AT&T? I have searched all over and cannot find any ZenFone 2 firmware other than WW, TW, and CN. Any help or suggestions much appreciated.
Click to expand...
Click to collapse
i have the exact problem since saturday, you have to use the ATT firmware but i couldnt find it anywhere
also
please pm me if u fixed yours
Lactaid said:
please pm me if u fixed yours
Click to expand...
Click to collapse
Still no luck. I'm sure if we could find the AT&T firmware we would be able to recover. Unfortunately it appears it is not available on ASUS support and AT&T doesn't even provide firmware. Our only hope may be from a backup of another device that isn't bricked.
Does anybody know if we could possibly use the temporary CWM recovery used in the root method to flash to another ROM that is compatible with this device? Any input would be greatly appreciated.
Are there any details I can provide that would be helpful in finding a solution to recover this device? I've seen a few other people are having the same issue as I am and I would like to help them as well if I can get mine fixed. Thanks
JRSouth said:
Are there any details I can provide that would be helpful in finding a solution to recover this device? I've seen a few other people are having the same issue as I am and I would like to help them as well if I can get mine fixed. Thanks
Click to expand...
Click to collapse
ive literally tried everything, my device has been bricked for like 3 weeks now
Lactaid said:
ive literally tried everything, my device has been bricked for like 3 weeks now
Click to expand...
Click to collapse
Just out of curiosity have you tried running the xoa_unroot.bat while your device is in recovery/fastboot mode? Im not sure if it will help but I've found in other threads that to avoid soft bricking your device you must run the unroot prior to applying the OTA update. I'm sure it's probably too late but maybe worth a shot. I'm going to try it when I get home from work today.
JRSouth said:
Just out of curiosity have you tried running the xoa_unroot.bat while your device is in recovery/fastboot mode? Im not sure if it will help but I've found in other threads that to avoid soft bricking your device you must run the unroot prior to applying the OTA update. I'm sure it's probably too late but maybe worth a shot. I'm going to try it when I get home from work today.
Click to expand...
Click to collapse
i havent tried it yet, do you have a tutorial of it?
The truth hurts, your screwd. This is a budget phone. At&t will not support it. Throw away device my their standards.
http://forum.xda-developers.com/attachment.php?attachmentid=3505774&d=1444776691 here the system image for the file maybe try to flash it to see if it helps
http://forum.xda-developers.com/showpost.php?p=63323103&postcount=118
^^^This worked for me successfully!
Make sure to only restore system and disable MD5 Checksum Verification.
I have the same problem, what do I do with that file? How do I apply it through the SD, so I can apply update from SD? I forgot pin code to phone so i need to restore
need help
Lactaid said:
http://forum.xda-developers.com/attachment.php?attachmentid=3505774&d=1444776691 here the system image for the file maybe try to flash it to see if it helps
Click to expand...
Click to collapse
how do I flash this?
Hola, alguien lo consiguió hacer..???
Lactaid said:
http://forum.xda-developers.com/attachment.php?attachmentid=3505774&d=1444776691 here the system image for the file maybe try to flash it to see if it helps
Click to expand...
Click to collapse
Im getting an error that day footer is wrong :/
m1chb3ltr3 said:
Im getting an error that day footer is wrong :/
Click to expand...
Click to collapse
Wait, are you bricked and tried using that as the fix? I cant post links but Check out Asus, They have Firmware, Kernel (havent checked but read it earlier today), and Boot Unlock that you can get right from (assuming you have an account) My Products.
Also... Has anyone used that method recently?
Cathaterfish said:
Sorry I will give credit to DavePmer for his guide in minute, but qouting him for some reason wouldnt let me post, even when I removed the links? anyways I'll edit and give credit I promise
So my phone is stuck on the Asus Logo, I downloaded all of this and followed the instructions all the way up to:
11) now the fun part. open your microsd card and check the folder TWRP\BACKUPS see if it has a folder named
01234567890123456789 if it does great if not, not a problem just copy all the system files from the folder
you extracted TWRP-zf2e-ATT_12.16.10.7 to your microsd card TWRP\BACKUP\01234567890123456789\ whatever folder you have next\ in other words, replace your system.ext4.win000 files with my system.ext4.win000 file.
Replace your system.ext4.win001 with mine, and replace system.ext4.win00.md5 with mine as well as system.ext4.win001.md5 when done safely dismount the microsd card.
It then occurred to me that i should be more careful this time around... This was from October and although I ran across links saying for the most part that this was a good shot for fixing my ZE500CL, Z00D or whatever. But things have changed since then and I was wondering if this is still the best/easiest/safe route. I learned pretty quick that over looking things like OTA/Root or in my case Making assumptions is a fast path to really doing a number on your phone. (Honestly I just started even giving thought to rooting my phone, just considered them back ups I kept in a box). I now have the itch to do this right so hoping to fix this and go about this the right way.
Thanks for any input.
Currently DLing RussaiNBeaR, went and bought a card reader/writer. I was going to Download the firmware, kernel and boot unlock tool but currently staying at a place where im getting 160kbs on my DL's. So if I can get away with davepmer's guide that would be great, or something other or smaller than downloading 4gbs on this Internet Connection.
EDIT: Forgot to add that I haven't completed this step yet because the wording kind of tripped me up. And I want to do this right. When he says "in other words replace your system.ext4.win000 files with my system.ext4.win000 file." and then goes on and 3 more to the list. Does that mean only copy and replace those 4? or does that include all system.(whatever).(extension) files? Im sure it sounds really dumb or noobish but the fact that the next step is using twrp to restore using system only makes me afraid to do this part wrong.
Click to expand...
Click to collapse
ayuda
ATT ZE500CL/Z00D rom
Anyone know what this is for?
Jrocker23 said:
Anyone know what this is for?
Click to expand...
Click to collapse
Hm. 612 megs. That could be....well let's see.
Sent from my Nexus 6 using Tapatalk
Installed and currently on the Android is upgrading/Optimizing apps screen...... Hopefully won't take too much longer.
software repair patch for 5.1 as told by vzw customer service. what it is repairing i dont know
3.10.605.7 / Base: 2.12.C1144073
Nothing different.... Seems just like a security patch.
http://www.verizonwireless.com/support/htc-one-m9-update/
SnoStorm said:
Nothing different.... Seems just like a security patch.
http://www.verizonwireless.com/support/htc-one-m9-update/
Click to expand...
Click to collapse
One can only wonder what the heck verizon does to their software such that it requires a 612meg security patch huh?
Anyhow.. Time to use that nandroid i posed in the dev section to accept the OTA.. -or- I will post an updated one later this evening.
Probably 600mb of updated NFL bloatware included and the rest just the security update.
Any word yet on whether this is really just a 612Meg security patch?
jtommyj said:
Any word yet on whether this is really just a 612Meg security patch?
Click to expand...
Click to collapse
yup, nothing special
Anyone know if letting this thing run and update will break root? I'm stock, rooted. Don't want to lose that and not be able to get it back myself.
baune7 said:
Anyone know if letting this thing run and update will break root? I'm stock, rooted. Don't want to lose that and not be able to get it back myself.
Click to expand...
Click to collapse
are you SOFF? if so, you will be fine
Yes.. I'm s-off and unlocked. So after it updates, will it still be rooted? Or would I havery to re-root it? I'm just worried because my cable Internet isn't working for a few days and I need my wifi tether. Thanks
Ran into an issue with this update. It failed to install on 11/3 with a error code 409, but when I try to download it again by selecting "Check for new system updates" it says I have the latest update. I've rebooted a number of times and it shows up every time. From what little information I can find online, I have to reset my phone to factory then attempt to update again. I want to avoid this so here I am.
I'm on my phone so I can't properly upload the screenshots. I posted Google Drive links for now
https://drive.google.com/file/d/0B__V8WYcxeW8dkVxOXktZXZHcVU/view?usp=sharing
https://drive.google.com/file/d/0B__V8WYcxeW8YWdsU1kyMmZOcFk/view?usp=sharing
gumbyx84 said:
Ran into an issue with this update. It failed to install on 11/3 with a error code 409, but when I try to download it again by selecting "Check for new system updates" it says I have the latest update. I've rebooted a number of times and it shows up every time. From what little information I can find online, I have to reset my phone to factory then attempt to update again. I want to avoid this so here I am.
I'm on my phone so I can't properly upload the screenshots. I posted Google Drive links for now
https://drive.google.com/file/d/0B__V8WYcxeW8YWdsU1kyMmZOcFk/view?usp=docslist_api
https://drive.google.com/file/d/0B__V8WYcxeW8dkVxOXktZXZHcVU/view?usp=docslist_api
Click to expand...
Click to collapse
Flash the custom firmware zip and restore the nandroid I posted of the update. Then wipe data for the app htcdm. Flash supersu.zip and you're done.
Sent from my Nexus 6 using Tapatalk
dottat said:
Flash the custom firmware zip and restore the nandroid I posted of the update. Then wipe data for the app htcdm. Flash supersu.zip and you're done.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I'm not rooted.
Update: I decided to just to a factory reset. Thankfully it worked and I am at the latest firmware.
So I've tried letting this update run a couple times. Downloading for the third time as I write this. When it tries to install, it just reboots into TWRP recovery and does nothing. Then I restart the phone and basically start the process all over again. Any guidance on how to get this squared away?? I met one of the members here with a card who S-offed, unlocked, rooted, my phone which I'm thankful for. Just want to be stock rooted is all. Don't really do much with custom roms on this phone. Thanks.
baune7 said:
So I've tried letting this update run a couple times. Downloading for the third time as I write this. When it tries to install, it just reboots into TWRP recovery and does nothing. Then I restart the phone and basically start the process all over again. Any guidance on how to get this squared away?? I met one of the members here with a card who S-offed, unlocked, rooted, my phone which I'm thankful for. Just want to be stock rooted is all. Don't really do much with custom roms on this phone. Thanks.
Click to expand...
Click to collapse
I'm pretty sure you need stock recovery to take an OTA.
SigLover21 said:
I'm pretty sure you need stock recovery to take an OTA.
Click to expand...
Click to collapse
Ok.. Thanks.. I'll have to check into that
Hey Folks
I have a slight issue, I had a rooted HTC 10(UK EE) phone running firmware 1.80.91.1, which I wanted to update so I flashed a back-up from TWRP to restore OTA functionality, however, this backup was corrupted and the phone got stuck in a boot loop with no OS, hurrah!
I've sorted that however, by locating a TWRP backup of 1.21.91.4, which was the only one I could find for the CID EVE__001, this file was just a boot and sys.img no recovery, now I still can't get OTA updates as I'm getting the file system is corrupted error when trying to download the updates.
So I've hunted and hunted either to find a full back-up, recovery or RUU that will work with my CID as I'm S-on, I have had no luck, so I can no longer get updates for the phone.
So, does anyone have a stock recovery they could upload for either 1.21.91.4, or even better a full back-up of any of the x.xx.91.x firmware? I've been tearing my hair out trying to find anything above 1.21.91.4 and even that was just a partially back up.
Any help is muchly appreciated.
Hi, I am om EE uk but my CID is HTC__001.
I HAVE A FULL BACKUP DONE IN TWRP, WHICH YOU CAN HAVE. I WILL SORT IT OUT AND SEND YOU A LINK. DONT KNOW IF IT WILL WORK BECAUSE OF DIFFERENT CID, BUT YOU CAN GIVE IT A GO.
GIVE ME A DAY OR SO.
Sorry to resurrect the thread, @si86 I've having trouble restoring radio signal on my HTC 10 after flashing an incorrect ROM, I'm on EE also- I'd really appreciate a copy of your TWRP backup to try on my handset if you are able to supply, would be very appreciated! I'm able to change the CID to match, having been through them all recently! My bootloader is unlocked and I'm S-Off. Thanks.
@Tuesg Were you able to rectify your situation?
SailorJerry01 said:
Sorry to resurrect the thread, @si86 I've having trouble restoring radio signal on my HTC 10 after flashing an incorrect ROM, I'm on EE also- I'd really appreciate a copy of your TWRP backup to try on my handset if you are able to supply, would be very appreciated! I'm able to change the CID to match, having been through them all recently! My bootloader is unlocked and I'm S-Off. Thanks.
@Tuesg Were you able to rectify your situation?
Click to expand...
Click to collapse
I am uploading the copy to my g_drive now. It is around 6.5Gb. Sent me your email so I can give you access to the folder so you can download it.
Sent from my HTC 10 using XDA-Developers Legacy app
you legend. will pm you now. Thanks.
SailorJerry01 said:
you legend. will pm you now. Thanks.
Click to expand...
Click to collapse
I've just hunted high and low to try and figure out why nothing will flash successfully to my HTC 10.
turns out to be this same issue, I'm showing as CID - EVE_001 on an MID 2PS62000
Any chance you could send me that link as well so that I can at least try and get the phone back to a usable state instead of being stuck in either bootloader, download or recovery.
My phone is Bootloader unlocked, but still S-On as I hadn't got that far yet.
Will i need to flash a stock recovery? and lock the bootloader again to get this to install properly?
It's really proving tricky as hell.
I got caught out a bit here as I was half way to using sunshine to s_off, and then I accidentally triggered an OTA update to Nougat 7.0.......
It never restarted properly after that and i've been unable to get it back to 6 or any other ROM at all as they all fail.
I managed to fix it, but only by switching to s-off and installing the EU edition software, I'm a tad concerned now though as I've yet to get the roll out of the 7.0 update, not sure if that's because of installing a different firmware or whether it hasn't been rolled out yet.
@si86 Many thanks for your assistance and sharing the files, I was unable to fix my phone after trying various avenues (100+hrs) so I swallowed my pride and went the insurance route, not worth spending more time on getting to work and I now have a rather nice device, yet unusable call/texts wise to play with alongside my nice shiny new one running 2.41.91.3 - I've rooted and S-off with sunshine, just trying to decide whether i'm going to play with some more custom ROMS again! Of course I am!
@Tuesg Kudos on fixing your issue!
guys can you please help me, my HTC 10 is EVE_001 i want to unroot how do i do that? i bought it off gumtree and cant get banking app to work due it being rooted.
faceman123 said:
guys can you please help me, my HTC 10 is EVE_001 i want to unroot how do i do that? i bought it off gumtree and cant get banking app to work due it being rooted.
Click to expand...
Click to collapse
You can usually do it straight from the SuperSU app itself.
silegeek said:
You can usually do it straight from the SuperSU app itself.
Click to expand...
Click to collapse
how can i do that, im really noob to this, thanks
faceman123 said:
how can i do that, im really noob to this, thanks
Click to expand...
Click to collapse
Along with superuser usually comes with an app for configuring it, depending on how it was rooted. SuperSU is usually the most common although I much prefer magisk.
It will be obvious what it's called, either superuser, SuperSU, etc. SuperSU contains within it the ability to fully unroot.
If there's no app, and if it is a stock rom, and not a custom one, a factory reset will remove it. If not, you will probably need to either do some adb commands to remove it, or remove it using the recovery.
silegeek said:
Along with superuser usually comes with an app for configuring it, depending on how it was rooted. SuperSU is usually the most common although I much prefer magisk.
It will be obvious what it's called, either superuser, SuperSU, etc. SuperSU contains within it the ability to fully unroot.
If there's no app, and if it is a stock rom, and not a custom one, a factory reset will remove it. If not, you will probably need to either do some adb commands to remove it, or remove it using the recovery.
Click to expand...
Click to collapse
you sir are my hero, i will try when i get home !!
silegeek said:
Along with superuser usually comes with an app for configuring it, depending on how it was rooted. SuperSU is usually the most common although I much prefer magisk.
It will be obvious what it's called, either superuser, SuperSU, etc. SuperSU contains within it the ability to fully unroot.
If there's no app, and if it is a stock rom, and not a custom one, a factory reset will remove it. If not, you will probably need to either do some adb commands to remove it, or remove it using the recovery.
Click to expand...
Click to collapse
In short terms, yes that might work for banking apps but it won't work for future Android updates. You need a completely stock (untouched) system and SU changes that even if you choose to unroot via the application.
hi when i i tried that super user unoot it goes to Twrp bootloader and nothing in there says unroot or uninstall twrp bootloader
Hey guys Google pay still doesn't work says phone has been modified I am eve_001 software number 1.80.401.1 what can I do to make phone stock again
faceman123 said:
Hey guys Google pay still doesn't work says phone has been modified I am eve_001 software number 1.80.401.1 what can I do to make phone stock again
Click to expand...
Click to collapse
I've had that issue with both Viper and Maximus. Removing root doesnt seem to totally remove it, and certain apps still pick up ... something.
Going back to total stock condition is a huge pain in the unmentionables. Because quite a lot of phones don't actually have an RUU for thier CID (for instance mine, H3G__001) has no RUU. So complete stock, even from TWRP backup was never an option for me. Even though ROOT wasnt an issue, things like OTA problems persisted no matter what.
I had to S-OFF (worth it in general tbh) in order to go back to a complete stock condition using the HTC WWE version (HTC__001). In the end I just decided to stick with the ROM I have now, LeeDroid. It has the option to be installed without root from the get go, but these days I just use Magisk. It is so simple to hide from banking apps and even things like pokemon go, that it doesnt do any harm having root there.
si86 said:
Hi, I am om EE uk but my CID is HTC__001.
I HAVE A FULL BACKUP DONE IN TWRP, WHICH YOU CAN HAVE. I WILL SORT IT OUT AND SEND YOU A LINK. DONT KNOW IF IT WILL WORK BECAUSE OF DIFFERENT CID, BUT YOU CAN GIVE IT A GO.
GIVE ME A DAY OR SO.
Click to expand...
Click to collapse
Hey si86,
wondering if I can get a link to your backup too!!
Thanks man!
PM me your email and I will send you a link.
Sent from my HTC 10 using XDA-Developers Legacy app
---------- Post added at 09:44 PM ---------- Previous post was at 09:40 PM ----------
Jon Olita said:
Hey si86,
wondering if I can get a link to your backup too!!
Thanks man!
Click to expand...
Click to collapse
Send me your email, and I will send you a link
Sent from my HTC 10 using XDA-Developers Legacy app
si86 said:
Hi, I am om EE uk but my CID is HTC__001.
I HAVE A FULL BACKUP DONE IN TWRP, WHICH YOU CAN HAVE. I WILL SORT IT OUT AND SEND YOU A LINK. DONT KNOW IF IT WILL WORK BECAUSE OF DIFFERENT CID, BUT YOU CAN GIVE IT A GO.
GIVE ME A DAY OR SO.
Click to expand...
Click to collapse
Hi there,
I'm in the exact same spot as the guy above. I restored the backup he mentioned, but don't have the Recovery. Therefore my phone is telling me I need to enter decryption password and won't boot past it.
Would you be able to give me that backup too?
Thanks.
Hello guys, so after spending a lot of time doing research on which partitions to extract to flash. I found out that the partitions on the link did the trick. I have 2 Sprint V50 same model one is rooted, the other is not, made the backup with Qfil from the non rooted and flashed those onto the rooted, that did the trick. Only use Qfil to flash partitions, do not use TWRP, it'll fail and your data will be erased to get it to work again!
The files are the one's I used, so I upload those to you guys! Hope it helps someone, if you have a doubt, just ask I'll be happy to help.
When I have some time I'll try to make a guide of it. If a new update arrives I'll update this post with the new files!
PARTITIONS 20N - Google Drive
drive.google.com
thx bro.
Strange I've never had any issue with flashing these in TWRP as long as I clear data/userdata. Then again I prefer starting fresh on a new OTA.
Thanks
Am I supposed to flash these files on just slot b or both slots
Merlve said:
Am I supposed to flash these files on just slot b or both slots
Click to expand...
Click to collapse
these are to be flashed on your current slot.. so A if you're on A
THANK YOU!
cloud1250000 said:
these are to be flashed on your current slot.. so A if you're on A
Click to expand...
Click to collapse
How can this be viewed on the phone?
i flashed these, but when i reboot to system it gets stuck on the lg logo. any idea?
1maaax said:
i flashed these, but when i reboot to system it gets stuck on the lg logo. any idea?
Click to expand...
Click to collapse
Did you ever figure this out? I can't seem to gain root anymore with magisk flashed images... the system sticks at the lg logo... once I restore boot_a it boots fine
q-killer said:
Did you ever figure this out? I can't seem to gain root anymore with magisk flashed images... the system sticks at the lg logo... once I restore boot_a it boots fine
Click to expand...
Click to collapse
I've never figured it out, sorry
1maaax said:
I've never figured it out, sorry
Click to expand...
Click to collapse
I just got mine fixed by remote unlock service in Ukraine in v50 telegram channel.... He only has internet on tues-wed but its a reasonable $28 to restore this device. Good luck
q-killer said:
I just got mine fixed by remote unlock service in Ukraine in v50 telegram channel.... He only has internet on tues-wed but its a reasonable $28 to restore this device. Good luck
Click to expand...
Click to collapse
I just flashed kdz with lgup to restore original firmware, in case it happens to you again
1maaax said:
I just flashed kdz with lgup to restore original firmware, in case it happens to you again
Click to expand...
Click to collapse
1maaax said:
I just flashed kdz with lgup to restore original firmware, in case it happens to you again
Click to expand...
Click to collapse
But... My phone won't go into download mode any longer. It did prior to the restore service. Also, I was not able to locate a kdz image for this phone.... Only the international version. Any ideas on how to restore download mode and flash a custom rom?
q-killer said:
But... My phone won't go into download mode any longer. It did prior to the restore service. Also, I was not able to locate a kdz image for this phone.... Only the international version. Any ideas on how to restore download mode and flash a custom rom?
Click to expand...
Click to collapse
What happens when you try to boot download mode? I'm not sure which kdz you are looking for. If it is sprint, I recommend looking for the v50 sprint backup files shared on xda. It isn't kdz, but result should be more or less the same.
Since the original link is dead, I've mirrored the files in case anyone needs them:
V450PM20n
C D said:
Since the original link is dead, I've mirrored the files in case anyone needs them:
V450PM20n
Click to expand...
Click to collapse
THX a lot, btw, is your V50 Still working on t-mobile?
rrhhuutt said:
THX a lot, btw, is your V50 Still working on t-mobile?
Click to expand...
Click to collapse
Nowadays, I can only connect via Wi-Fi calling while the cellular connection no longer works, so I'm guessing that T-Mobile is doing some IMEI-based blocking on their end.
Hrhigher said:
Hello guys, so after spending a lot of time doing research on which partitions to extract to flash. I found out that the partitions on the link did the trick. I have 2 Sprint V50 same model one is rooted, the other is not, made the backup with Qfil from the non rooted and flashed those onto the rooted, that did the trick. Only use Qfil to flash partitions, do not use TWRP, it'll fail and your data will be erased to get it to work again!
The files are the one's I used, so I upload those to you guys! Hope it helps someone, if you have a doubt, just ask I'll be happy to help.
When I have some time I'll try to make a guide of it. If a new update arrives I'll update this post with the new files!
PARTITIONS 20N - Google Drive
drive.google.com
Click to expand...
Click to collapse
Hrhigher said:
Hello guys, so after spending a lot of time doing research on which partitions to extract to flash. I found out that the partitions on the link did the trick. I have 2 Sprint V50 same model one is rooted, the other is not, made the backup with Qfil from the non rooted and flashed those onto the rooted, that did the trick. Only use Qfil to flash partitions, do not use TWRP, it'll fail and your data will be erased to get it to work again!
The files are the one's I used, so I upload those to you guys! Hope it helps someone, if you have a doubt, just ask I'll be happy to help.
When I have some time I'll try to make a guide of it. If a new update arrives I'll update this post with the new files!
PARTITIONS 20N - Google Drive
drive.google.com
Click to expand...
Click to collapse
My friend ask me to changer firmware lg v450 to v500 but messed up some files and now phone is just showing logo and i didn't find stock firmware could you please re-upload your rom
i need your help