This is embarrassing - I have had the Moto 360 for a few weeks, and it has been working fine. I could view the Keep app and view the lists on my 360 just fine.
Recently (I think after the recent Keep app update from the play store to my Nexus 6), the keep app no longer shows up on my Moto 360. I've performed a factory reset on the 360, and paired it again, and have also tried reverting back to previous version of keep on my N6. No difference. (I've rebooted both devices).
I'm getting other notifications just fine. Any suggestions?
(when I use ok google to take a note from the 360, it tries for a couple of seconds, and then tells me to use my phone instead)
(N6 is stock/rooted)
jj14 said:
This is embarrassing - I have had the Moto 360 for a few weeks, and it has been working fine. I could view the Keep app and view the lists on my 360 just fine.
Recently (I think after the recent Keep app update from the play store to my Nexus 6), the keep app no longer shows up on my Moto 360. I've performed a factory reset on the 360, and paired it again, and have also tried reverting back to previous version of keep on my N6. No difference. (I've rebooted both devices).
I'm getting other notifications just fine. Any suggestions?
(when I use ok google to take a note from the 360, it tries for a couple of seconds, and then tells me to use my phone instead)
(N6 is stock/rooted)
Click to expand...
Click to collapse
I had the same issue, though not from updating. Picked up the 360 last week and my first install was like this. Reset the Moto 360 / reinstalled keep on the nexus 6.
I too factory reset my phone shortly after getting the watch and this along with the reset of the watch solved the keep program from not opening on my watch.
I again had the same problem after reinstalling a custom rom, I reset the moto again and reinstalled keep on the phone and I am good to go with keep.
Weird - I tried those steps (except for factory reset of the phone), and it didn't help. Hoping to not have to factory reset the phone
Thanks for the suggestion though
Related
I've had the moto 360 since launch. It is connected to my Rooted HTC m8. I've never had any problems at all with notifications coming but something wear must have happened yesterday. It got stuck on a text message reply using 8sms and now no notifications are going through. I've reset the watch, tried disconnecting, connecting. It connects perfectly, all my apps are there, wear mini launcher, wear messenger, all are there. But if I try getting notifications it doesn't work and and when I test pandora or spotify, it knew a music player app was running, but only the play button would show up and none of the buttons pressed performed any action.
fyi i've never altered the moto 360 in any way.
My next steps:
Delete the android wear app.
Completely unpair and forget the bluetooth connection
Reset moto 360
redownload android wear
test
rinse and repeat
memekmek said:
I've had the moto 360 since launch. It is connected to my Rooted HTC m8. I've never had any problems at all with notifications coming but something wear must have happened yesterday. It got stuck on a text message reply using 8sms and now no notifications are going through. I've reset the watch, tried disconnecting, connecting. It connects perfectly, all my apps are there, wear mini launcher, wear messenger, all are there. But if I try getting notifications it doesn't work and and when I test pandora or spotify, it knew a music player app was running, but only the play button would show up and none of the buttons pressed performed any action.
fyi i've never altered the moto 360 in any way.
My next steps:
Delete the android wear app.
Completely unpair and forget the bluetooth connection
Reset moto 360
redownload android wear
test
rinse and repeat
Click to expand...
Click to collapse
SOLVED:
My steps did the trick. That was odd. I think the key was deleting android wear app and the original bluetooth connection
I've updated to the new Connect app, and the app on the phone works fine, but none of the new features will sync to the watch. I've tried restarting the watch, resetting the watch, uninstalling and reinstalling both Android Wear and the update to the Connect app (on a Moto X, so I can't fully uninstall Connect).
Anybody seeing this? Maybe I need to do all that in a particular order?
I am having the exact same issue. Using a Moto X 2014. The app updated and works on thr phone but none of the new features will sync
In the same boat as well...
Same with me. Running lg g3. I've read the issue is the phone that your 360 is connected with. Some people paired their 360 with a different phone and then the new watch faces finally appeared. But once they would try to pair their 360 back to their current phone, the watch faces would still not show.
No problem here on my Nexus 5
you won't see anything different on the phone after the motorola connect update in terms of the Body app. However, if you go into the start menu on the watch itself, you should see moto body features such as calories, steps, heart activity, and heart rate. hope this is helpful.
Won't work on my S4 either, tried everything. Bummer!!!
Works fine with my s4. Try restarting phone?
ditto
Same issue on my moto x 2013. Can't do anything to get them to show up. Done everything short of a hard reset on the phone
same here, nexus 5 on lollipop
I had the same problem. I use it with my Nexus 5 running an AOSP Lollipop Build.
Solved it by uninstalling the Motorola Connect App and reinstalling. After that everything new appeared on the 360.
Hope this helps :good:
mc-paulo said:
I had the same problem. I use it with my Nexus 5 running an AOSP Lollipop Build.
Solved it by uninstalling the Motorola Connect App and reinstalling. After that everything new appeared on the 360.
Hope this helps :good:
Click to expand...
Click to collapse
Many thanks this worked for me. I was dreading having to do a factory reset.
Edbogue
Out of nowhere today, my watch started to constantly show "Unfortunately, Android Wear has stopped." I can not get into the menus, and changing the face on my phone does nothing. I've tried turning it on and off but it hasn't helped. It still connects to my phone. Is there a way to reset it?
This briefly happened to me as well, it appeared to be a weak Bluetooth connectivity issue. Once I got closer to my phone things improved. However once I got control back I did remove the extra watch faces I have installed.
Sent from my XT1094 using Tapatalk
I had the same issue after I update the 360 to 5.1.1 and could never get it working. Had to call Moto for a replacement. Just got it yesterday and it has 5.0.1 and I'm not sure if I should take the OTA update that keep popping up.
I have had my SW3 for some time now. I use it mainly to run with so I don't have to bring my phone (galaxy s4). I have had music on the watch for months. Recently I was having an issue with the watch dropping connection with the phone. I did a factory reset on the watch and everything seemed fine. My notifications are working and it is not dropping connection anymore. However, when I go to the Play Music app to reload my music, the watch says the Phone is disconnected. I went to the Google Play Music app on my phone and checked to make the download to Android wear box is checked. Check and recheck but the watch still says the same. I have deleted and reinstalled Android Wear on my phone several times as well as done a factory reset on my watch multiple times. Occasionally the watch will say that Google Play Services is required but I checked and they are on my phone. What else can be done? I am extremely miffed because running without my phone is the main reason I got the SW3.
My watch was on:
Android Wear version - 1.3.0.2166028
Play Services = 7.8.99
Android OS = 5.1.1
As you can see it was stuck on the old version of Google play services for some reason 7.8.99 for some reason. This is a software glitch that my watch had but my girls moto 360 was just fine.
My watch would glitch out and crash many times a day.
It is the newest update to the android wear app that does not like google play services 7.8.99. Nothing i did could force an update so i had to revert to an earlier version of android wear app and the watch worked just fine.
What finally fixed my watch was the update to 6.0.1 that happened for my watch last night. These are the steps to take to make it happen smoothly.
1: With the newest version of android wear on the phone do a factory reset to your watch.
2: Place the watch on the charger and go through watch setup.
3: Once done syncing take the watch off the charger and connect it to your home wifi. Then go into setting and check for an update.
If no update repeat steps 1-3
4: If the update starts downloading go into the android wear app and disconnect the watch. Turn off bluetooth as well just incase.
(This is because it is the app itself that causes the phone to crash. The watch will then hook up to wifi and finish the download...it will also be faster)
5: Put watch on charger wait a while and the download should be ready. Make sure it is over 80% and start update. I recommend keeping it on the charger.
After its done you should be all good to go. All versions should be up to date. Mine is running great!
Hope this helps everyone!
Doesn't work for me. Tried three times.
I have a different one here, all good but for the android wear app keep crashing while scrolling down in 'watch storage' after the 6.0.1 update.
Factory reset watch, cleaning app cache didn't help.
GuyInDogSuit said:
Doesn't work for me. Tried three times.
Click to expand...
Click to collapse
does your watch see the update now?
moeozman said:
I have a different one here, all good but for the android wear app keep crashing while scrolling down in 'watch storage' after the 6.0.1 update.
Factory reset watch, cleaning app cache didn't help.
Click to expand...
Click to collapse
forget and reset watch. leave the watch on the charger and let it sync everything. it can take a very long time. i recommend doing it while you sleep. just let it sit and it should be fine
No, still doesn't see it.
Sent from my Nexus 6 using Tapatalk