Related
Okay so I'm running stock ICS without root or any custom stuff, everything just stock, today I was listening to music and decided to change the songs, so I pressed the power button but the screen didn't come on, tried a few more times, the screen didn't come on but the music kept going, so out of desperation I held down the power button and after 3 seconds or so it sounded like a BSOD, sound repeated quickly for a second then just nothing.
So after that I tried starting it up back again, here we go, acer logo....aaaannnddd.......nothing.
Tried a few more times and left it over 30 minutes yet nothing. just that acer logo.
so finally I though I could flash a stock rom file, so I grabbed the .014 ics file and put it in my freshly formatted micro sd under the name update.zip (and no I didn't have the double .zip), then I went to recovery, it came up with the familiar android with his chest open and the spinning cube thingy in front of him, then after 5 seconds it came up with the android and the red warning sign above him, which usually meant either SD card not found or update.zip not found, tried a few more times and NOTHING.
FINALLY, I tried the volume down and rotation lock method to try factory reset, it erased userdata and cache and fingers crossed...yet nothing.
am I SOL? Or is there any hope at all, I tried connecting to a computer while it's at the Acer logo screen, you can hear the USB connect and disconnect sound, but adb won't detect it, please help, I love this thing too much and Acer wants me to pay 100 dollars to fix it, I'll die before I do that.
ANY HELP will be appreciated, any suggestions are welcome.
Bump, anyone please??
I love this tablet too much
Try update.zip again on a different SD card. Not all of them work in all devices. Also doubt check its formatted fat32 not something else. Are you sure you have the proper drivers installed for adb?
Tapatalked from my Galaxy S II.
pio_masaki said:
Try update.zip again on a different SD card. Not all of them work in all devices. Also doubt check its formatted fat32 not something else. Are you sure you have the proper drivers installed for adb?
Tapatalked from my Galaxy S II.
Click to expand...
Click to collapse
I have proper drivers installed and I tried with 2 sd cards, one was almost full but on FAT32, and one was freshly formatted to FAT, I'll try format to FAT32 and report back
I tried formatting to FAT32, placing the update.zip
Sadly, didn't work
Any other suggestions anyone?
Metallica 4 Life said:
I tried formatting to FAT32, placing the update.zip
Sadly, didn't work
Any other suggestions anyone?
Click to expand...
Click to collapse
What does didn't work mean? The answers are in the details, we need them or we're just guessing at random things. Any text, vibrations, lights, pictures all that.
Try adb from a different cable, port, computer? Try hard reset again, hell try 3-4 times, sometimes it takes some persistence.
Oh also plug it into power supply, low battery can cause issues too.
Tapatalked from my A100 - Flex Reaper RF1.
I've been trying for a few days with almost everything, tried APX mode but apparently it doesn't work since you need the CPU ID
and by "doesn't work", I mean I get the vibration, the acer logo pops up, then at the top it starts saying the loading update.zip stuff, then it goes to the green android with it's chest opened and a small blue link ball rotating beside him, after 7-8 seconds, it just shows a dead android, with his chest open and a red triangle with an ! in it.
So yeah, ADB doesn't work, as it never goes past the acer screen.
OK have you managed or tried fastboot? If you can manage that then you should be able to get adb up.
This is basically what I mean about fast boot
http://forum.xda-developers.com/showthread.php?p=27015316
Tapatalked from my Galaxy S II.
Only if I can get to fastboot from stock bootloader, everything I had was stock, OTA ICS, stock bootloader, and no root
Metallica 4 Life said:
Only if I can get to fastboot from stock bootloader, everything I had was stock, OTA ICS, stock bootloader, and no root
Click to expand...
Click to collapse
You can that's how you unlock the boot loader, check out that post and give it a shot.
Tapatalked from my Galaxy S II.
Can you maybe link me or if you know tell me how to get to it? I'm kind of new to all of this :/, I tried searching with no results
Take a read through this thread
http://forum.xda-developers.com/showthread.php?t=1655945
It discusses a slightly different scenario but the techniques attempted are what I mean to try.
Post #3 gives a good outline of steps to try. Also 14 25 31 maybe 27 if it goes south.
I've never personally experienced this so I have no experience however the process in that thread is the same I would attempt if it happened to me. Basically it will attempt to unlock the boot loader then flash a custom recovery which you can then install a new rom. It will turn it into a modded device BUT it will unbrick you and make repairing this issue a lot easier in the future.
Tapatalked from my Galaxy S II.
Gave up
Update:
So yeah i've tried everything and nothing seemed to work, all it shows is that acer logo
Gave it to my sister, she said she'd send it back to the acer facility, hope for best.
Hello,
just some hours ago my Galaxy Nexus (SC-04D) rebooted while lying on the table next to me. After several sings of vibration I noticed that the phone doesn't boot completely.
When switching on the phone I get the turn-on-vibration, then the google letters are displayed. Most times the word "google" flickers from left to right over the screen (only the line where the word is supposed to be). Sometimes it boots further and I get the colored "X" displayed. This symbol starts flickering, too and if it went so far it reboots.
Here are two pictures I took from the phone failing to boot:
picpaste.com/img_0001_01-Rmm7kDYb.jpg
picpaste.com/img_0001-eoLqVoiM.jpg
The phone is running stock Android from Docomo. The phone is about 14 months old and has never been unlocked, rooted, modded, taken a bath, ... 'til now.
I tried starting with and without SIM-card, with and without charger attached and let it lie around for several minutes without battery between my tries.
Is there any chance to get my data from the phone or even get it fixed? Please give me a hint what I can do.
Well the Red exclamation mark means that there is a problem with the phone reading the build path. Since you have never rooted the phone, this would mean that the files got corrupt on the phone. With a non-rooted phone a Factory Reset is about the only solution, but is probably only a temporary fix. This is most likely caused by too many apps on the phone and it just freaked out on something eventually.
I think these options might work for you, however I cannot confirm since I have rooted my phone from day one and never looked back:
Power button + up volume= recovery
Thanks GPFboy for your fast response,
GPFboyJS said:
Well the Red exclamation mark means that there is a problem with the phone reading the build path. Since you have never rooted the phone, this would mean that the files got corrupt on the phone. With a non-rooted phone a Factory Reset is about the only solution, but is probably only a temporary fix.
Click to expand...
Click to collapse
As far as I understand a factory reset results in a complete loss of data on the phone, right? So without root/unlock there's no chance to get my data from the phone? That would be really bad.
GPFboyJS said:
This is most likely caused by too many apps on the phone and it just freaked out on something eventually.
Click to expand...
Click to collapse
What is "too many"? I think there are about 35 apps installed atm. By the moment the problem arose wifi and 3g-data,BT,GPS were disabled and just a minute before I took a look how late it was. So nothing special.
GPFboyJS said:
I think these options might work for you, however I cannot confirm since I have rooted my phone from day one and never looked back:
Power button + up volume= recovery
Click to expand...
Click to collapse
The phone reaches fastboot mode, but when selecting recovery mode I get the google logo and after that the open android with the red exclamation mark. That doesn't look good, does it?
BrainSD said:
The phone reaches fastboot mode, but when selecting recovery mode I get the google logo and after that the open android with the red exclamation mark. That doesn't look good, does it?
Click to expand...
Click to collapse
thats stock recovery.
is your bootloader already unlocked or no?
Zepius said:
is your bootloader already unlocked or no?
Click to expand...
Click to collapse
It's still locked.
you might try and go into recovery,
then press (i think) power and vol up and try and see if you can wipe just cache.
Zepius said:
you might try and go into recovery,
then press (i think) power and vol up and try and see if you can wipe just cache.
Click to expand...
Click to collapse
ok, I tried that several time now, but it didn't work. The only thing when I select recovery and press the power button is that I get the google logo and then the dead android + red exclamation sign, but this screen is scrambled and shows flickering pixels as shown in one of my pictures in the first post. So recovery mode seems not to work for me?
Is there a software or hardware problem with my device?
BrainSD said:
ok, I tried that several time now, but it didn't work. The only thing when I select recovery and press the power button is that I get the google logo and then the dead android + red exclamation sign, but this screen is scrambled and shows flickering pixels as shown in one of my pictures in the first post. So recovery mode seems not to work for me?
Is there a software or hardware problem with my device?
Click to expand...
Click to collapse
You can try to unlock your boorloader and flash a custom recovery like cwm or twrp. Maybe that helps. You can always go back and re lock it.
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
You can try to unlock your boorloader and flash a custom recovery like cwm or twrp. Maybe that helps. You can always go back and re lock it.
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
He wants to keep his data... which, at this point, seems rather impossible.
If fastboot doesn't solve it, i would try omapflash, OP. That "flickering" doesn't look good.
beekay201 said:
He wants to keep his data... which, at this point, seems rather impossible.
If fastboot doesn't solve it, i would try omapflash, OP. That "flickering" doesn't look good.
Click to expand...
Click to collapse
Well if I was him I would be more worried about my expensive phone instead of data. Maybe a lesson for later to have a backup
Sent from my Galaxy Nexus using XDA Premium HD app
beekay201 said:
He wants to keep his data... which, at this point, seems rather impossible.
If fastboot doesn't solve it, i would try omapflash, OP. That "flickering" doesn't look good.
Click to expand...
Click to collapse
Yes exactly this is the point. Since I don't have a current data backup the first thing to try is getting my data from the phone. I already tried temporary loading the clockwork recovery through fastboot - with the galaxy nexus toolkit and by hand(sdk) - but it failed ("Bootloader locked").
What I'm wondering about is the fact that the phone seems to behave normally in odin and fastbood mode but going nuts the moment it's expected to boot. Besides the flickering google logo and the "matrix-modded" dead android it even ended up in a totally green screen one time.
At the moment I don't dare trying to unlock/flash the phone because of being afraid getting stuck and ending up with the phone being in some kind of undefined / totally broken state. Initially I was in hope of being able to rescue my data but now i will try my luck with docomo support first.
As far as I understood omapflash is primary used for recovering bricked phones not even starting to odin/fastboot mode. But thanks to your hint I found http://forum.xda-developers.com/showthread.php?t=2016628 "Unlock bootloader on GT-I9250 without wipe and without root" This might bring some chance for data access.
I will try to get through 1 to 4 of the guide first and see how far I get.
If this won't work I might try to unlock, recover and try to "undelete" what's possible. (http://forum.xda-developers.com/showthread.php?t=1994705)
Does this order make sense?
Btw, having a dead phone is bad, of course, even when I got it new for 2300Yen but loosing some pictures i really liked and having no phone atm currently hurts more. Especially when knowing that I was thinking of copying all photos to my computer only one day before when I pulled only some minor important ones from the phone I needed for work and planned to do a full backup and unlock this weekend when I get back my 'Milestone' currently lent to someone else.
Once again something I learned. Backup! Even you phone.
BrainSD said:
As far as I understood omapflash is primary used for recovering bricked phones not even starting to odin/fastboot mode. But thanks to your hint I found http://forum.xda-developers.com/showthread.php?t=2016628 "Unlock bootloader on GT-I9250 without wipe and without root" This might bring some chance for data access.
Click to expand...
Click to collapse
!!!
It will work actually, I read/also replied to that thread! I had forgotten about it, sorry. I must say that if you had already read the stickies that matter, you'd already know about it.
It will unlock your bootloader, bypassing fastboot. Still, it's not for the faint hearted. I refered to omapflash because its a low level tool, it doesn't require the bootloader to be unlocked, and is able to restore the bootloader to working state, and I got there because you mentioned you see graphical glitches/flickering which may indicate bootloader partition failure and/or consequent corruption.
I think that's your best shot at trying to get your data back. After unlock, boot to fastboot and 'fastboot boot custom_recovery.img', and grab your stuff (if you can) from /data/.
beekay201 said:
!!!
It will work actually, I read/also replied to that thread! I had forgotten about it, sorry. I must say that if you had already read the stickies that matter, you'd already know about it.....
Click to expand...
Click to collapse
Your hint was very helpful for me getting the right direction since I'm just starting to dig into all this stuff.
Unlocking went quite well. Writing back to the phone worked without a problem and after that it's shown as unlocked in fastboot mode.
It even started loading clockwork recovery with fastboot. But the initial cw recovery screen (their logo and the cw recovery footer) was already shown on a scattered screen (google logo + unlocked lock was fine). After that the usb port connected and disconnected several times, then the screen went blank.
May this be because of corrupted fs or defective hw?
From my understanding with omapflash one have raw access to the phones internal memory similar to with dd on Unix/Linux. So currently I'm trying to dump ("upload") the emmc from the phone - actually in smaller chunks since omapflash needs to allocate all the memory in advance for the upload and to prevent interruptions. This will take a while...
After that I want to try to 'cat' the parts together and mount the filesystem - might be possible to do this from linux since it seems to be ext4 filesystems
BrainSD said:
Your hint was very helpful for me getting the right direction since I'm just starting to dig into all this stuff.
Unlocking went quite well. Writing back to the phone worked without a problem and after that it's shown as unlocked in fastboot mode.
It even started loading clockwork recovery with fastboot. But the initial cw recovery screen (their logo and the cw recovery footer) was already shown on a scattered screen (google logo + unlocked lock was fine). After that the usb port connected and disconnected several times, then the screen went blank.
May this be because of corrupted fs or defective hw?
From my understanding with omapflash one have raw access to the phones internal memory similar to with dd on Unix/Linux. So currently I'm trying to dump ("upload") the emmc from the phone - actually in smaller chunks since omapflash needs to allocate all the memory in advance for the upload and to prevent interruptions. This will take a while...
After that I want to try to 'cat' the parts together and mount the filesystem - might be possible to do this from linux since it seems to be ext4 filesystems
Click to expand...
Click to collapse
Great, so far so good.
Yeah, they're ext4 images, but sparse images i believe - link
I've had my Samsung Galaxy Tab S 8.4 (SM-T705Y) for just over two years now and it has worked brilliantly beside the odd issue here and there, including the device freezing from time-to-time. Each time that particular freezing issue has happened, I've used the 'Power and Volume Down buttons' technique and it has successfully fixed the issue.
Now, a few days ago, I was using my tablet for normal morning things; music app playing in the background, YouTube opened on the side, using the preinstalled Browser and Google Chrome apps, etc. I am not sure if it was updating any Google or Samsung apps at the time. The screen froze up so I left it for a few minutes, seeing if it would unfreeze. When it didn't, I used the same Power and Volume Down technique, which successfully forced-restarted the tablet. There was a small mistake I made doing this; I was holding down both the Power button and Volume Up button. It took me around thirty seconds to realise why the screen wasn't turning off and switched to the Volume Down button. At the time, both my earphones and the charging cord were connected.
However, upon the loading screen, I noticed that it did not pass the Samsung logo screen with the little explosion of blue circles and just kept replaying the same animation repeatedly. The Application History and Back buttons did not light up and the device did not vibrate as it normally does when it boots up. I repeated the Power-Volume Down technique to see if that would fix the issue. Once again, the tablet rebooted normally but was stuck at the logo screen playing the animation. I tried this same force-restart again, this time without the charger plugged in. No change.
So, I left it running through the animation while doing Google searches through forums and getting into contact with Samsung as to what the issue could be. I'll list down below what my tablet can and can't do at the moment and hopefully someone will have a clue as to what is going on and how to fix it. I will point out now that it was not going through a firmware update at the time, the device is not rooted and nor do I plan on taking that path with it, and I have not made any changes to it that can void the warranty.
It can:
- Recharge (The battery icon will show up if it is force-restarted and the charger is plugged in at the time.)
- Reboot (It's not exactly stuck in a bootloop, more of just the 'explosion' animation replaying over-and-over.)
- Enter Recovery Mode
It cannot:
- Enter Safe Mode
- Be Shut Down without the charger attached (As stated above, the device will only turn off with the Power-Volume Down buttons held for about 30 seconds and that causes the device to restart, not turn off. The only way for it to completely shut down is to have the charger connected and then unplug it after the battery icon appears.)
I have tried removing the SD card and placing it back in, power-cycling it, letting it run on the animation until the battery runs out and then letting it recharge to 100% before turning it on again, connecting it to Samsung Smart Switch (which recognises that there is a Samsung device connected, but not being able to register the device itself), and wiping the Partition Cache (Also note; the Recovery Mode has the 'No Command' sign with the android laying down and the red triangle with the exclamation point above it. Clearing the Partition Cache seemed to go smoothly, however when I chose the 'reboot device now' option, the 'No Command' sign changed to 'Error!' and rebooted the device anyway.) I am now currently trying another technique written on a different website (though since I am a new user, I cannot post up URLs at the moment). So far, plugging in the earphones alone hasn't worked and the device is currently connected to my laptop - which is shut off - and still has the earphones connected, but the animation is the only thing the screen is still showing.
I have important files saved in the internal storage of my Tab S and I do not have them backed up, which is the only issue that's stopping me from just going ahead and doing a Factory Reset as I cannot lose these files.
I am unsure if my Tab S is soft-bricked or if this is another issue entirely and I just missed something that could have already fixed it.
Yes, this is a long and detailed post, but hopefully with these details, someone will be able to help with this issue. If I can restore my Tab S to its condition before the freeze, that would be amazing, but I can definitely settle with only being able to salvage my files from the internal storage and then performing a Factory Reset on it.
Thank you in advance~
It might be a corrupt partition. The way i know involve rooting or the other one might format your device to factory setting.
edan1979 said:
It might be a corrupt partition. The way i know involve rooting or the other one might format your device to factory setting.
Click to expand...
Click to collapse
Really? I might look into that a bit more, thanks! With the second method you mentioned, how likely are the chances of it formatting the device to the factory settings?
AussieMouse said:
Really? I might look into that a bit more, thanks! With the second method you mentioned, how likely are the chances of it formatting the device to the factory settings?
Click to expand...
Click to collapse
download the official firmware and flash it via odin. it usually fix this type of problem. but usually the files on the internal storage/sdcard will be intact. only the data apps will be gone. this will not break your warranty (its already 2 yo device... no more warranty anyway ^_^)
edan1979 said:
download the official firmware and flash it via odin. it usually fix this type of problem. but usually the files on the internal storage/sdcard will be intact. only the data apps will be gone. this will not break your warranty (its already 2 yo device... no more warranty anyway ^_^)
Click to expand...
Click to collapse
Alright, I'll try that and let you know how it goes. Is there any specific website I should download the firmware (4.4.2 KitKat) from? (Yeah, I agree with you there! Still, just to be on the safe side~)
KIT KAT? ok that's old... hahaha... why dont you try MM. I think you can search for it at fw.updato.com probably can see all related firmware there.
edan1979 said:
KIT KAT? ok that's old... hahaha... why dont you try MM. I think you can search for it at fw.updato.com probably can see all related firmware there.
Click to expand...
Click to collapse
Haha Yeah, I'm not too fond of installing software updates due to past experiences~ I'll have a look around.
AussieMouse said:
Haha Yeah, I'm not too fond of installing software updates due to past experiences~ I'll have a look around.
Click to expand...
Click to collapse
MM is ok. I dont have any problem with it.
edan1979 said:
MM is ok. I dont have any problem with it.
Click to expand...
Click to collapse
Thank you so much for your help! I managed to find the KitKat 4.4.2 firmware on SamMobile and flashing it restored everything~
ok so bottom line is, I was in the middle of flashing official rom when at about 25% it failed. Don't ask why! (i still had recovery at this point) so I went ahead and cleaned absolutely everything thinking i'll just try and reflash as before. Now with power lead out it won't switch on at all and when power is supplied it shows message "An error has occured while udating the device software." loops at approx 3 sec intervals cant do anything with it.
Ive tried everything I can think of all to no avail! yes its my own fault bla bla bla just wondering if i act have f***** it.
Thanks to anyone with any ideas
You probably going to get a better help at TAB S2 board this is for the tab S1.
If it is hard bricked there is JTAG methods that can help, just need to find one for your device, not easy though.
But all I can do is share my experience with something like this, in a more "cheap" way than JTAGs, dunno if it helps:
I never had a similar problem on the tab S. But in the past a galaxy player 5.0 of mine had a very similar problem (as far I remember the screen just powered the back light but without any letters or simbols)
in 2012, I bricked it trying to mount a swap partition (280mb RAM ftw) accidentally pointing the wrong partition, and got the entire internal storage corrupted.. everything.. system, bootloader, recovery etc
My player was turning on only connected to a USB or charger, like yours. in fact It was hard bricked
I was able to recover it using Linux (because it is the only system able to communicate with the bricked device I had)
The problem is that everything need to be very specific, for example I used a software made for the galaxy s1 to "revive" my player 5 (both have the same hardware) it just made the device be detected via ADB. So I needed to prepare a SD with the same size as the internal storage (in this case 8gb) using the Linux terminal to mount in the SD an exactly schematic of the internal memory using a dump of another device that a xda user shared, (the dump was empty only with the bootloader, recovery etc) but it still had 8gb decompressed. So after that I used ADB to push the SD card content to the internal memory. And it get back to life \○/
Well.. it took me 1 week with a guide!! On the trial and error method. But it worked.. not perfectly, I get bootloops every time I try to flash a rom via Odin, but recovery works, and I have the device working until today
Hi, I Greatly appreciate your reply and advice. Think tho that your solution is a bit beyond my know how I know a little about ADB etc but i would have difficulties in compiling necessary files to sideload. Also many tanks for the link din't realise. Thanks Pal!
Alpha1BA said:
ok so bottom line is, I was in the middle of flashing official rom when at about 25% it failed. Don't ask why! (i still had recovery at this point) so I went ahead and cleaned absolutely everything thinking i'll just try and reflash as before. Now with power lead out it won't switch on at all and when power is supplied it shows message "An error has occured while udating the device software." loops at approx 3 sec intervals cant do anything with it.
Ive tried everything I can think of all to no avail! yes its my own fault bla bla bla just wondering if i act have f***** it.
Thanks to anyone with any ideas
Click to expand...
Click to collapse
If you can get it in to download mode you can flash stock rom back on it.......refer to xda samsung tab s2 for more details on this........
thx for reply but it reboots approx every 3 seconds so I dont have enough time to do anything with it :/
Alpha1BA said:
thx for reply but it reboots approx every 3 seconds so I dont have enough time to do anything with it :/
Click to expand...
Click to collapse
Plug in changer and push power and volume up and down all together and you will see the battery charger icon then you can get it in to download mode from there.....
stinka318 said:
Plug in changer and push power and volume up and down all together and you will see the battery charger icon then you can get it in to download mode from there.....
Click to expand...
Click to collapse
Stinka ure a superstar (atm!) I did as you suggest to no avail but I noticed a slight increase in the time it took to start rebooting again. I do not know which buttons did this but some 20 later it lasted long enough for me to be able to flash twrp. Now i havent actually tried that as yet as i wanted to check with you first... I have the battery logo on screen, i tried recovery and it started as it should but then rebooted, now im unsure at this time whether the battery is almost dead or not so i got it on charge and have the grey battery with a white flash inside... is this what i want for now until its charged? if so i'll keep you informed thamnks more than u know if uve helped me fix this, the reason i was flashing was because when i received it (no warranty!!) the screen sometimes flickered and it would constaly end up rebboting after digging around re that im lead to believe it need a new battery and for the connecting wires to be resoldered. Anyways thanks again n as I say i'll keep this updated
Cheers
Tony
one of the probs i hab/have with this unit is that it takes approx a day to fully charge!!! when i received it the screen flickered on the odd occasion but it was rebooting much more frequently. It came with stock n not messed with previously (i new this prior to purchase so got it for right price thinking it only needed flashing, how wrong was I!!!) so I flashed and encountered the above mentioned problems! thanks to stinka I surprisingly managed to flash a recovery... now provided all goes to plan, which rom would one suggest for stability and generally hassle free and prusuming the aforementioned probs, rebooting etc are still there what could i try to stop that? other than a debloated stock I found Lineage an excellent rom but still the problems got so bad the unit became unusable and was lucky not to go out the window. Im thinking do i start with a replacement battery and check the wires etc or could this still be a software issue??
if i endevoured to do the hardware myself would I attempt it by removing screen or the base for access to battery/connector??
Thanks again
In the tab s1 the best way is removing the back cover, but for some reason tab s2 seen to be the screen... at least in this guide: https://www.ifixit.com/Guide/Samsung+Galaxy+Tab+S2+Battery+Replacement/56616
Look like alot more complex than the s1 :/
RoIlingThunder said:
In the tab s1 the best way is removing the back cover, but for some reason tab s2 seen to be the screen... at least in this guide: https://www.ifixit.com/Guide/Samsung+Galaxy+Tab+S2+Battery+Replacement/56616
Look like alot more complex than the s1 :/
Click to expand...
Click to collapse
Thanks for that!!!
Tony
does look somewhat OTT!!!
will i have to odin stock first then flash rom i want or will it go straight from first flash via twrp considering there is absolutely nothing on phone at mo apart from twrp.
Alpha1BA said:
if i endevoured to do the hardware myself would I attempt it by removing screen or the base for access to battery/connector??
Thanks again
Click to expand...
Click to collapse
My guess is your issue is lack of charge in the device. That's the reason for the flashing failure and the reboot loop with the firmware error.
Bang it on charge for a while then irrespective of what it's doing, whether it's looping or not, hold POWER + HOME + VOL DOWN until download mode appears.
Reflash the stock firmware with odin.
swapped battery and reflashed stock via odin. It has helped although the issues are all still there its just they happen less frequently which doesnt mean its any less frustrating.
I know that this issue has been discussed several times here on the forum, but I couldn't find a solution for my situation. So, kindly bear with me.
I was talking on the phone when it slipped and fell down to the ground. When I lift the device, the screen was fine but the touch was not working. I couldn't draw the lock pattern or type the password or anything. I restarted the device several times but without success.
I found a youtube video on how to open the device to check the screen flat cable. I opened the device and checked the cable. It was a little bit loose, I secured it and put everything back. I turned on the device and the screen worked, but it gave the message "Your device is corrupt ..." (Red warning).
The google support forum said that this warning is due "tampering" with the OS. This is not my case because simply, I don't know how.
I tried "Factory Reset" several times, but wasn't successful. The device keeps showing this warning and when I continue, it works for half an hour or so before it restarts again, and so on.
My problem now is that I don't know if this is a hardware or software problem.
I really appreciate all your help and support.
Best Regards,
mwahid
mwahid said:
My problem now is that I don't know if this is a hardware or software problem.
I really appreciate all your help and support.
Best Regards,
mwahid
Click to expand...
Click to collapse
That is what shows up on every boot after you unlock the bootloader. There may have been a short circuit of some kind and was viewed as tampering. It affects nothing in the way your phone operates but affects warranty.
If it is really bothering you, you can try to flash the factory image and relock the bootloader. Then re-unlock the bootloader to see if that gets rid of the problem. However, as stated above it does not affect how your phone operates; so personally I would just leave it.
Thanks for your reply.
The problem is that the device is not working properly. It keeps restarting every half an hour or so and sometimes it hangs even when I am not using it.
I checked the bootloader from the fastboot menu and it is locked. I didn't try to unlock the bootloader or reflash the device. This message appeared only after I opened the device to fix the screen.
I will try reflashing the factory image and see what will happen.
Thanks again for your help.
I followed this guide to the letter, but the problem is still the same. The phone works for a few minutes then suddenly restarts and displays the message "Your device is corrupt ..." (Red warning)
I really appreciate any ideas.
Thanks
Hello again,
Could a hardware malfunction be the cause of this problem?
I just want to know so I can evaluate my option whether to fix it or buy a new one.
Thanks,
mwahid
Im haveing the same problem but i never drop it or open it its did not boot half the time now its having none of it its will not even turn on so gg LG.