as my cell fell into water some days back i am noticing random screen dimming issues after. Does any one facing such issue ...if yes. please guide the fix for the dimming issue. right now i am on the 5.1.1 with TWRP recovery ..!!
Might be issue with light sensor, is auto brightness ON
BANG that THANKS button
i have tried on and off of brightness ...mostly this issue happening after booting into TWRP recover ....and the screen goes dark that there is very less screen light to select options
So is the problem with TWRP only?
BANG that THANKS button
Related
On both the stock ROM and CM11 nightlies (12-12-2013, 12-13-2013) here are times when I try and wake up the tablet (double tap, power button) and the sceen is fully dim. It does not even auto adjust and get brighter after unlocking. If I power it off and wake up the tablet again it is the normal auto brightness.
Anyone else having this issue?
pgibbons said:
On both the stock ROM and CM11 nightlies (12-12-2013, 12-13-2013) here are times when I try and wake up the tablet (double tap, power button) and the sceen is fully dim. It does not even auto adjust and get brighter after unlocking. If I power it off and wake up the tablet again it is the normal auto brightness.
Anyone else having this issue?
Click to expand...
Click to collapse
I received my Gpad this afternoon. Apart from installing apps I have not modified it with root or custom ROMs. The auto brightness seems 100% rubbish. Ticking and unticking the check box seems to have random or no effect at all. This is indoors and with steady lighting. I can't say that I've noticed anything out of the ordinary when waking the device. Auto brightness is simply rubbish, full stop.
Try the Lux app, it fixed the brightness issues for me.
This bug deserved a new thread.
If you've updated your phone to cm12, 5.0.2 then DO NOT DO THE FOLLOWING:
1. in Settings>Display and lights DO NOT keep "Adaptive Brightness" and "Color Enhancement" switched on at the same time. If you do, and then EVER try to manually reduce the screen brightness to minimum, YOUR SCREEN WILL BO BLANK. PERMANENTLY. Not kidding.
AND IT WILL NOT RETURN TO WORKING CONDITION without a factory reset.
Things that won't work:
1. Pulling out the battery and trying to reboot it. Nope. Been there, done that.
Hope CM takes note of this.
AS a Public Service.....
AyanReborn said:
This bug deserved a new thread.
If you've updated your phone to cm12, 5.0.2 then DO NOT DO THE FOLLOWING:
1. in Settings>Display and lights DO NOT keep "Adaptive Brightness" and "Color Enhancement" switched on at the same time. If you do, and then EVER try to manually reduce the screen brightness to minimum, YOUR SCREEN WILL BO BLANK. PERMANENTLY. Not kidding.
AND IT WILL NOT RETURN TO WORKING CONDITION without a factory reset.
Things that won't work:
1. Pulling out the battery and trying to reboot it. Nope. Been there, done that.
Hope CM takes note of this.
AS a Public Service.....
Click to expand...
Click to collapse
This happened to you???
yep. Currently using the phone without color enhancement enabled.
yesterday I faced the same problem
Yesterday My screen became black as I have enabled adaptive display & color correction it was not immediately it became black after 5 to 6 hours later after I set the setting & it was not displaying any thing I tried removing battery but it did not got fix.I did clear cache & factory reset then it started back.
Then you guys can do bug report to CYANOGENMODE or Here YU Forums
Got Hard Bricked no fastboot just dead thn join this petition
https://www.change.org/p/yu-yureka-provide-customer-care-service
Cure for it
well i have experienced it. but to avoid it you can choose the option
setting>status bar> and check Adjust brightness by sliding across the status bar.
so whenever the screen turned off you can swipe on the top from left to right so that brightness can be adjusted again!
you dont have to reset your phone.
AyanReborn said:
This bug deserved a new thread.
If you've updated your phone to cm12, 5.0.2 then DO NOT DO THE FOLLOWING:
1. in Settings>Display and lights DO NOT keep "Adaptive Brightness" and "Color Enhancement" switched on at the same time. If you do, and then EVER try to manually reduce the screen brightness to minimum, YOUR SCREEN WILL BO BLANK. PERMANENTLY. Not kidding.
AND IT WILL NOT RETURN TO WORKING CONDITION without a factory reset.
Things that won't work:
1. Pulling out the battery and trying to reboot it. Nope. Been there, done that.
Hope CM takes note of this.
AS a Public Service.....
Click to expand...
Click to collapse
I faced this today only.... screen went completely blank for a few sec, although I was not aware of this bug, but the brightness slider on status bar saved me....
So many bugs in this CM12.... huh...
and the screen off effects are gone as well after CM12 ugrade...
rahulbasu2013 said:
I faced this today only.... screen went completely blank for a few sec, although I was not aware of this bug, but the brightness slider on status bar saved me....
So many bugs in this CM12.... huh...
and the screen off effects are gone as well after CM12 ugrade...
Click to expand...
Click to collapse
Yupp ur right there is lots of bug in cm12..i didnt find any silent mode..there is only vibration mode is available..
kenil89 said:
Yupp ur right there is lots of bug in cm12..i didnt find any silent mode..there is only vibration mode is available..
Click to expand...
Click to collapse
ya silent mode not available... you have to go tosettings and uncheck the "vibrate to ring" option
even auto brightness dont work all the time... lollipop is really bad... not worth the upgrade...
---------- Post added at 06:11 AM ---------- Previous post was at 06:10 AM ----------
happened to me also.... I thought it was a problem with a theme... so i initially rated it 2 stars on play store, but after i saw it was a problem with cm, i went back and gave that theme a 5 star rating...
SOLUTION!!!!
It is still possible to take control over your phone in this situation. If your screen goes blank, this doesn't means that your phone has stopped working, the phone is still functional and you just have to find a way to increase the brightness. If you ever encounter this problem just swipe the screen twice from top to bottom to open the status bar and then slide your fingers on the screen where the brightness controller is present. This will surely solve your problem without any factory reset bull****. Please note that during this complete process the screen will remain blank. I have tested it a hundred times and it works 100%.
this works ... instead of factory reset
shamsiareeb said:
It is still possible to take control over your phone in this situation. If your screen goes blank, this doesn't means that your phone has stopped working, the phone is still functional and you just have to find a way to increase the brightness. If you ever encounter this problem just swipe the screen twice from top to bottom to open the status bar and then slide your fingers on the screen where the brightness controller is present. This will surely solve your problem without any factory reset bull****. Please note that during this complete process the screen will remain blank. I have tested it a hundred times and it works 100%.
Click to expand...
Click to collapse
Not fixed still
Please someone take this in lights to cynogen devlopers
how to set the display contrast
or colour enhancement
in yu yureka
Just install vysor in your pc and plug your phone to the pc. Now control your phone using your pc and increase the brightness same wy you reduced it. No need for any factory reset. Hope this helps.
you should Try this
Facing The Phone to Direct Sunlight or if in the night. face it near to the bulb. It will adapt light from the bulb and screen works then you can turn off adaptive brightness. That's works for me.
Hello, I have problem with display brightness, display random flash like I set brightness to minimums..But I didnt pressed anything, just randomly display dim but I can use phone only if I'm in dark room or its night, on regular day light i can't use it..So problem is that random fast flashing from normal to dim (but not normal dim, its hard to work on phone) phone is not hot and I dont play any games or using any software..
I used try recovery reset, factory reset and nothing..
Any solution or anybody have same issue like me..
Hi,
I have a problem with my OP 9Pro.
After a phone call, the display sometimes stays black and it takes a while before you can use the device again.
Does anyone else have that and, above all, how can I solve the problem?
Many greetings and thanks
Mars
Are you on OOS12? I only experienced that bug in the short time I ran OOS12. One of the main reasons I reverted to OOS11 actually.
Yeah I get this too. From what I can tell, it seems to have something to do with the proximity sensor killing the screen when you put it up to your ear, then hanging when the call ends.
OOS11
Me too. On 11. Thinking it may be from Nova or Adguard. Until I figured out that I could hit the "screen on" button to regain control I would wait till the other person hung up. So, as a workaround that's what I do, hit the button.
That happens when the proximity sensor it's being blocked. If you have any screen protector over the camera notch (where the proximity sensor is) then that's why it's turning the screen off.
If you don't have anything covering the sensor then try making a call on another app (like WhatsApp) to see if the issue persists there too. If not then it might be the dial app, try restarting your phone.
If it happens on many messaging apps, and there's nothing covering the sensor, try downloading a sensor tester app to see if the proximity sensor is being triggered all the time. If it is then it's a hardware issue and you'll have to return your phone a get a new one.
chetqwerty said:
Me too. On 11. Thinking it may be from Nova or Adguard. Until I figured out that I could hit the "screen on" button to regain control I would wait till the other person hung up. So, as a workaround that's what I do, hit the button.
Click to expand...
Click to collapse
Power button is unresponsive when the phone goes pitch black. Even switching the alert slider to something different doesn't trigger the fingerprint sensor on.
I'll try disabling pocket mode. I also found positive feedback about this when you enable the "Override force-dark" setting in Developer Options. See if that helps.
Has been happening to me from time to time since A12. I just hold volume up, volume down and power button at same time and reboot to recovery and restart from there. That fixes it really quick for me.
Yes, I'm on A12 because I thought it would get better here. But I had the same problem with the A11.
I haven't managed to solve the problem yet.
It also happens on Android 11 but it's not quite as bad here. The display turns on after a little while.
Where is the sensor actually? It's not the camera. It's to the right of the speaker. or?
Hi, Guess!
I got a solution from the Oneplus team. (1800 202 8888) / general phone tech support team helped me with these steps:
1- under setting search reset
2- click on Reset all settings
3- Reset all settings. click it.
As this is a normal reset will not lose your data.
The last option is if this doesn't work then we have to backup all data from the phone and do a factory reset.
or it's a hardware issue.
e-regards!
Piyush Sahni
Hi,
I recently clean flashed Pixel Experience 12 plus rom on my Oneplus 5T (dumpling).
(file: PixelExperience_Plus_dumpling-12.1-20220614-1354-OFFICIAL.zip , source : https://download.pixelexperience.org/dumpling )
After that I am facing a serious issue regarding the display.
After screen is locked (by pressing the power button or using tap to sleep feature or screen time out), it does not light up at the time and after unlocking. The screen remains black. But it does not mean that the display is gone or the phone is turned off. Phone works perfectly fine at that stage except the issue. The touch, vibration, sound effects,locking-unlocking (through fingerprint), taking screen shot, notification and call facility etc. works normally.
Sometimes the screen flashes for some millisecond if I try to unlock it repeatedly but it is visible only in the dark room.
To get rid of this state I have to boot the phone in recovery (Orangefox) mode then turn it on or force restart the phone (force restart does not work every time. When it does not work the boot screen also remains black)
Surprisingly, I do not face the problem in fastboot mode or recovery mode. Also when Always On Display is on, I don’t face the black screen issue.
I have followed instructions mentioned in this page https://telegra.ph/How-to-install-Pixel-Experience-11-25
and flashed firmware.zip (whose link is provided on the page) and PE12 plus rom .
Please help to resolve this issue and let me know if you need any further information.
Thank you..
I have got the same issue on my MI A2. after replace display I worked fine with pixel experience. and I moved to stock firmware. that is got the same problem. how to solve that issue?