Develop Bugs

[KK 4.4.4][ROM]Mackay ROM 4.9.13 (11-Oct-2014)

I have been sharing my CM7/CM9/CM10/CM10.1/CM10.2-based builds for some time in several thread, which culminated in the MackayROM. I continue now with KK4.4 from where I was for JB4.3. MackayROM is based on CyanogenMod sources, with several performance enhancements.
About Cyanogen: CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Disclaimer: I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
If you run into errors, I may not be able to solve it!
If you know a solution to a problem, either upload it yourself to Gerrit Code Review or contact me through pm.
The ROM is based on Cyanogen sources with the following changes:
-Mackay Kernel:
-Set of cherries picked from gerrit (differing by the day)
-Some additional patches I did myself to the source code
Feature request are OK, but remember:
1. I try to stay close to stock
2. I will not include additional apps, unless they can be build from source
3. The time I spend on features depends on how much I like them myself
Although it is possible to enable ART, this is not advisable:
-Takes long to convert from Dalvik to ART on first boot
-Needs more RAM
-Can cause soft reboots
But off course, YMMV -> light users may have better luck
Changelog of 4.9.14 - 5-Nov-2014
-CM11.0 codebase of 3-Nov-2014
-TWRP updated to 2.8.1.0
Full changelog of 4.9.14 compared to stock CM11.0:
CM11.0 sources of 3-Nov-2014
Mackay kernel:
Separate kernel thread: http://forum.xda-developers.com/showthread.php?t=2532813
TWRP (2.8.1.0):
-Themed orange
-Run recovery-apps (zip files should be present in /system/mackay, launch them through advanced->run app)
Removed apps:
-VideoEditor & demo VideoFiles
vendor/cm:
-Adapt for custom MackayROM building (bootanimation, ROM&file name)
-Custom bootanimation (Thanks to Malcho)
vendor/samsung:
-Added scripts for Mackay Settings
hardware/samsung:
-F4k 720p patch for bigmem kernels
AriesParts (“Mackay Settings” in Settings menu):
Add mackay kernel settings options:
>WiFi PM mode selection
>BLX settings
>BLN activation
>Navbar selection
>Low RAM mode selection
For other projects (frameworks/base & Settings, check my github for the latest patches)
Coming from stock Samsung ROM/CM7:
-The safest way is to flash CM9 first and then flash Mackay ROM. Going directly from Samsung ROM/CM7 to Mackay ROM may lead to loosing IMEI.
Fresh install:
Can be flashed on top of any CyanogenMod build:
-Do a factory reset
-Flash ROM
-Flash gapps
-Reboot your phone
Update:
-Flash ROM
-Reboot your phone
(no wipes or other things needed, just flash & reboot)
-Custom kernels can be used only if specific for KK4.4
Credits:
-teamhacksung/pawitp for making CyanogenMod work on our ancient phone
-stratosk/DerTeufel/Mialwe for the inspiration I got from their kernels
-rootax for providing a high-speed server for high quality downloads
-Malcho for his kernel splash & bootanimation
Downloads:
Basketbuild
Google Apps
Nano Gapps
For those who want to theme it even further, Bejda made a Mackay splash screen!
http://forum.xda-developers.com/showthread.php?t=2214468
To download the same kernel, but then with voodoo colour, or with CWM:
Basketbuild
XDA:DevDB Information
[KK 4.4.4][ROM]Mackay ROM, ROM for the Samsung Galaxy S I9000
Contributors
kasper_h
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2013-11-16
Last Updated 2014-09-21

Reserved

10 seconds after posting this thread I notice something went wrong with the uploads. Please have a bit of patience, the links will be updated ASAP.

kasper_h said:
10 seconds after posting this thread I notice something went wrong with the uploads. Please have a bit of patience, the links will be updated ASAP.
Click to expand...
Click to collapse
Ok, Thansk for the rom. I will instal today. In it there is CWM or TWRP?

marcinowozniako said:
Ok, Thansk for the rom. I will instal today. In it there is CWM or TWRP?
Click to expand...
Click to collapse
Kernel is TWRP-only at the moment.
Download link on XDA fileserver has been restored. Download link on rootaxbox will take quite a bit more time, needs a full re-upload & uploadspeed is very slow ATM.

Oh.
When will Galaxy Vibrant get this, same device, but still, no 4.4 ROM
Good job

Galaxy3HELL said:
When will Galaxy Vibrant get this, same device, but still, no 4.4 ROM
Good job
Click to expand...
Click to collapse
I think this will come soon, but I won't work on that

kasper, you compiled cm11 by yourself or you got the sources from cm, because there is no cm11 build in get.cm site yet

limnaln said:
kasper, you compiled cm11 by yourself or you got the sources from cm, because there is no cm11 build in get.cm site yet
Click to expand...
Click to collapse
I always build these ROMs myself from CM sources + my own additions to CM sources, so no need for "official" CM11 builds to enable my own ROMs to be build.

kasper_h said:
I think this will come soon, but I won't work on that
Click to expand...
Click to collapse
Can I install your kernel on CM11?

marcinowozniako said:
Can I install your kernel on CM11?
Click to expand...
Click to collapse
I have no separetely flashable kernel yet...

this is awesome... was waiting for this.... one quick question though... can we use officail paranoid android gapps with this rom?

rajeshbabushrestha said:
this is awesome... was waiting for this.... one quick question though... can we use officail paranoid android gapps with this rom?
Click to expand...
Click to collapse
Yes, in principle every gapps KK4.4 package should work. However, I only tested the package which I linked in OP.

thank you for this:good:

kasper_h said:
Yes, in principle every gapps KK4.4 package should work. However, I only tested the package which I linked in OP.
Click to expand...
Click to collapse
Thanks for KK rom :good: :good:
OP's link to Gapps contains five different builds- some with ART compatibility. Is there a preferred one? ART works/tested, or better stick to delvik for a little while?

A few things I noticed:
- If I select Performance settings from Mackay app, Settings force closes.
- Orientation tile is buggy, sometimes it seems to work, sometimes not.
The ROM is very snappy, thank you very much for your work!

Kasper_h installed this rom and I have a bug. When I want to enable high-speed data connections settings crashes me the error: com.android.systemui and closing forces. Framework to overloads.

Thanks for the rom, There isnt any bug list?

Installed on CM11 and works fine.No forced closure and fast enough to be a test.

so no separate kernel 0.600

[ROM][5.0.2][26/03]SlimUberLP[OPTIMISED SlimLP builds] for jfltexx

SlimUberLP​Hello! i'am happy to present my build for S4 : GT-i9505 (jfltexx).
I am not a developer, and i have to learn how to make it work. The goal of this build SlimUberLP, built from SlimLP source with Uber 4.8 compiler, is to make the ROM even faster and smoother.
Huge thanks to : Kantjer, AntaresOne, Alucard, Synergy510, Ezio, aow1980 (for the Toolchain repositories), Freak_97, letmedanz, Ralph (to add me in Slimbuilder collective) and all other i missed!
SlimUberLP is built from SlimLP source with Uber 4.8 compiler for rom, and 4.9 compiler for kernel (alucard and stock) to make the ROM even faster and smoother!
DISCLAIMER: I am not responsible for any damages to your device, bricked devices, dead SD cards, thermonuclear war, zombi walking near you...
Download the Rom :
For the moment, you have the choice :
- Using slimLP build optimised with stock (CM) kernel : all build with uber toolchain
- Using slimLP build optimised with alucard kernel inside : all build with Uber toolchain
Personaly, i choose with alucard inside!
With Alucard Kernel build with Uber Toolchain :
Slim-jfltexx-5.0.2.UberLP.Alpha.1.0-Alucard.zip
With stock (CM) kernel build with Uber Toolchain:
Slim-jfltexx-5.0.2.UberLP.Alpha.1.0-UNOFFICIAL-20150324-1424.zip
Download the gapps :
Official Slim GApps & Custom GApps
Download SuperSU :
https://www.androidfilehost.com/?fid=95916177934546965
Installation Instructions:
Upgrading from a previous build:
Wipe /system
Flash the ROM
Flash GApps
Flash SuperSU
Flash any add-ons you want (kernel for exemple)
Reboot into ROM
Upgrading from any other ROM (even SlimLP build):
Nandroid
Full wipe /system, /data and /cache
Flash the ROM
Flash GApps
Flash SuperSU
Flash any add-ons you want (kernel for exemple)
Reboot into ROM
First boot after install/update takes a while, wait at least 5 minutes for it to boot.
Contributors
Angelcalibur
alucard_24
Testers
Jimsilver73
wonsky21
Version Information
Status: Stable
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: SlimLP 5.0.2 last source
Toolchain: Uber
Created 2015-16-03
Last Updated 2015-26-03

Changrlog:
24/03/2015 :
-update with last slim source (nothing really merge for the moment)
-change name release
-build rom with last uber toolchain source 3-22-15
-build stock kernel with last uber toolchain source 3-22-15
16-03-2015
initiale release

reserved 2

Good luck in future development
Is this build based on the 17.02.2015 slimLP build? Or it has newer sources?

kofe said:
Good luck in future development
Is this build based on the 17.02.2015 slimLP build? Or it has newer sources?
Click to expand...
Click to collapse
Hello kofe!
thx for encouragement!
The build was made with the last source i can had before the slim gerrit server crashed. last source were merged on 21-02-2015.
for the future, i will make another build like kantjer did, based on last slim source.
when a official slim weekly will came, you will have the build made with UBER toolchain.
At the start developpement, i wanted to use sabermod, but after some discution with slim builder, i choose UBER Toolchain.
And that release work really fine!

You finally did it , bravo
Sent from my Beast using XDA Free mobile app

Here we go again - good work @angelcalibur

Waiting impatiently for more builds

flashed but had to change rom again because menu button bug, 50% od aosp roms have this bug, when screen is on on lockscreen and you press menu button device unlock

That's the first one but a good one!
Thumbs up!:good:

fedef12evo said:
flashed but had to change rom again because menu button bug, 50% od aosp roms have this bug, when screen is on on lockscreen and you press menu button device unlock
Click to expand...
Click to collapse
Hum... strange.
sorry but i don't have any bug like this, on all build i had test (cm12 optimised and official, slimlp official, google play ed...).
Did you make a full wipe (system, data, cache, pre-load...) ?

Soufiansky said:
You finally did it , bravo
Sent from my Beast using XDA Free mobile app
Click to expand...
Click to collapse
thank you mate!
it was hard for me (not a developper and a little noob on android building) but i like to learn how to do it.
i will make my possible to make this build the most perfect i can!

angelcalibur said:
Hum... strange.
sorry but i don't have any bug like this, on all build i had test (cm12 optimised and official, slimlp official, google play ed...).
Did you make a full wipe (system, data, cache, pre-load...) ?
Click to expand...
Click to collapse
yes, i dont use any security lockscreen just normale lockscreen try it

fedef12evo said:
yes, i dont use any security lockscreen just normale lockscreen try it
Click to expand...
Click to collapse
me too, no security lockscreen.
we are 3 testers for this build, no issus like this for us!

angelcalibur said:
me too, no security lockscreen.
we are 3 testers for this build, no issus like this for us!
Click to expand...
Click to collapse
really? maybe i have this issue because i use alucard kernel?

fedef12evo said:
really? maybe i have this issue because i use alucard kernel?
Click to expand...
Click to collapse
Don't think too! 2 testers on alucard, one on stock slim kernel...
If you want, try with the stock kernel and watch if bug is always here.

angelcalibur said:
Don't think too! 2 testers on alucard, one on stock slim kernel...
If you want, try with the stock kernel and watch if bug is always here.
Click to expand...
Click to collapse
ok going to clean flash again to see if something change

fedef12evo said:
ok going to clean flash again to see if something change
Click to expand...
Click to collapse
tried again super clean flash same result, menu button on lockscreen unlock device, maybe it is my recovery? im using twrp 2.8.4.0

fedef12evo said:
tried again super clean flash same result, menu button on lockscreen unlock device, maybe it is my recovery? im using twrp 2.8.4.0
Click to expand...
Click to collapse
did you try to go in properties, security, lock screen and in screen security, watch if you have :
nothing
pin
password...
choose option what you want to use...

fedef12evo said:
tried again super clean flash same result, menu button on lockscreen unlock device, maybe it is my recovery? im using twrp 2.8.4.0
Click to expand...
Click to collapse
Mines fine, I do use xposed additions though when I have time I will try without, but of you use xposed anyway, it may be a short term solution - also I highly recommend as it's much better even than old slim hardware key remapping!

[ROM] [LP 5.1.1] [UB] Tesla Unofficial

Here is infamous Tesla rom LP 5.1.1 built from source just a few hours ago. Latest features
My features:
1. Hardened kernel, overclocked, voltage, kcal, sound
2. Removed garbage IPs throughout sources
3. Removed NSA from kernel and replaced it with Tomoyo
4. Low camcoder sound fixed
5. Thermal manager values tweaked to prevent screen flickering and overheating
6. Data encryption set to 256 bit 7000 iteration
7. WIFI background scanning disabled for privacy and battery sake
8. Volte (Voice over LTE) enabled
9. Network selection handled by System, as opposed to Simcard/Modem to prevent carrier default
10. GPS supl change to Sony server
11. TWRP 2.8.0 incorporated in boot image
Maybe more...
Instructions:
1. Unlocked bootloader, TWRP
2. Enter recovery and wipe the following: System/Data/Cache/Internal SD
3. Factory reset: important since TWRP is known for not reliable formatting
5. Flash the rom and reboot
6. Enjoy and hit thank you, donate or both
Credit: Tesla Team, CM, Slimroms, AOKP
XDA:DevDB Information
Tesla LP5.1.1 Unofficial, ROM for the Sony Xperia Z1
Contributors
optimumpro
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: CM
Version Information
Status: Testing
Created 2015-06-22
Last Updated 2015-06-22

Screenshots
Screenshots added with a black theme...

Use this rom since 2 days, (sorry, got it from your androidfilehost account).
Beside the bugs it works rly great! First LP Rom i want to use as daily
Bugs i found:
- theres no powermenu, the phone goes imidiatly off. (fixed it with apm+)
- no CM-Themer (pls put in )
- your recovery doesn't work, only get a destroyd picture and phone freeze (fixed it with fota twrp)

Aaskereija said:
Use this rom since 2 days, (sorry, got it from your androidfilehost account).
Beside the bugs it works rly great! First LP Rom i want to use as daily
Bugs i found:
- theres no powermenu, the phone goes imidiatly off. (fixed it with apm+)
- no CM-Themer (pls put in )
- your recovery doesn't work, only get a destroyd picture and phone freeze (fixed it with fota twrp)
Click to expand...
Click to collapse
You are confusing this rom, which is an unofficial build with the official one posted a few days ago. My build was posted just an hour ago. None of those bugs are present in my build: There is CM themer, there is power menu including advanced boot and there is a working TWRP in boot image.

Sorry, it is from another team. My fault

See post #2 for screen shots...

optimumpro said:
Here is infamous Tesla rom LP 5.1.1 built from source just a few hours ago. Latest features
My features:
1. Hardened kernel, overclocked, voltage, kcal, sound
2. Removed garbage IPs throughout sources
3. Removed NSA from kernel and replaced it with Tomoyo
4. Low camcoder sound fixed
5. Thermal manager values tweaked to prevent screen flickering and overheating
6. Data encryption set to 256 bit 7000 iteration
7. WIFI background scanning disabled for privacy and battery sake
8. Volte (Voice over LTE) enabled
9. Network selection handled by System, as opposed to Simcard/Modem to prevent carrier default
10. GPS supl change to Sony server
11. TWRP 2.8.0 incorporated in boot image
Maybe more...
Instructions:
1. Unlocked bootloader, TWRP
2. Enter recovery and wipe the following: System/Data/Cache/Internal SD
3. Factory reset: important since TWRP is known for not reliable formatting
5. Flash the rom and reboot
6. Enjoy and hit thank you, donate or both
Credit: Tesla Team, CM, Slimroms, AOKP
XDA:DevDB Information
Tesla LP5.1.1 Unofficial, ROM for the Sony Xperia Z1
Contributors
optimumpro
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: CM
Version Information
Status: Testing
Created 2015-06-22
Last Updated 2015-06-22
Click to expand...
Click to collapse
Replacing resurrection remixed? What's the difference between 2? If this is superset of RR I'll switch over

wis3m0nkey said:
Replacing resurrection remixed? What's the difference between 2? If this is superset of RR I'll switch over
Click to expand...
Click to collapse
Not replacing anything. RR is well supported. Tesla is a different rom. It has support for Slimrom's layers as well as many other features. I like it more than RR, but for you the only way to find out is to try it...

optimumpro said:
Not replacing anything. RR is well supported. Tesla is a different rom. It has support for Slimrom's layers as well as many other features. I like it more than RR, but for you the only way to find out is to try it...
Click to expand...
Click to collapse
OK so I'll go to Tesla and use encryption similar to RR.
Is that correct?

wis3m0nkey said:
OK so I'll go to Tesla and use encryption similar to RR.
Is that correct?
Click to expand...
Click to collapse
Yes. All hardened features are there...

@optimumpro
Using this rom for 3-4 days no force closes no memory leak issues just damn perfect thank you... ?

TeslaOS is ROM by a well known banned member.
Any work or derived works are not welcome on XDA.
-karandpr
XDA Staff

[ROM][GEEHRC] AOSP 6.0.1 + Omnirom 6.0.1, CyanogenMOD 13

This is first marshmallow build you guys have been waiting for a long long time (few days since source has been released )
Flashing instuctions:
Download TWRP.
Make full wipe
Unmount /system
Download and flash the ROM zip
Working:
WiFi
Bluetooth
RIL
Everything not listed in bugs
Bugs:
Selinux permissive as of now
Download: AOSP for GEEHRC
OMNIROM for GEEHRC
CM13 for GEEHRC
Kernel Sources: Kernel (Branch : master-exp)
AOSP device tree
CM13 device tree
OMNIROM 6.0.1 device tree
AOSP Manifest
Changelog:
Code:
Changelog:
Updated release (v2) (11.10.15):
Changelog:
-Fix NFC (bring back nxp stack which google removed and make relocations of api23+ apps warnings instead of fatal errors again)
-Add the GMS location provider name (important for apps uisng gps)
-GPS: Update blobs from nexus 7 2013 (flo) m release
-Build powerhal for msm8960 (fix touchboost)
Updated release (v3) (11.10.15):
Changelog:
build:
-do not build quicksearchbox (makes launcher look weird xD)
kernel:
-fix undervolt up to 750mhz down
-add kernel mode neon
-ALSA+ASOC patches for sound
-hide a warning in kernel/return_address.c while building kernel
Rom update (v4) 14.10.15
Changes:
-Fixed NFC the proper way by building NFc hardware lib from source without relocations therefore making bionic hack unneccessary (Abhinav2)
- Revert flo m gps blobs (I feel mako ones works better)
- Update rest of adreno blobs to flo m release
- Fix browser fc bug by downloading a file (storage perms granted, others stil untouched)
-Show optimizing apps on first boot
-Updates to device tree from flo (n7 13) m branch
-Kernel: introduce lower frequencies
- More I forgot
Update release 15.11.15:
Changelog:
ROM:
-Merge AOSP r1 -> r26
Kernel:
-Switching to bricked kernel
-Updates in WIFI code
-Decrase kmsg logging when battery is under 10%
Proprietary files:
-Add missing drm widevine libs for netflix google play movies
Special Thanks:
Abhinav2
Dmitry Grinberg: Mako port
XDA:DevDB Information
AOSP - 6.0, ROM for the LG Optimus G
Contributors
Kevinjoa, All OG developers
Source Code: https://github.com/marshmallow-og
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Beta
Beta Release Date: 2015-12-29
Created 2015-10-09
Last Updated 2016-12-01

why on ROM information says: "5.1.x lollipop"? would you make some port for E970? Thanks in advance!

Nice. Very nice @kenvinjoa sir! Will try when its more stable.

Amazing you made what appears to be a pretty stable build and are optimising already. Thank you so much Kevinjoa, you are brilliant dev and generous person. The LGOG community would be lost without you.

working gapps https://www.androidfilehost.com/?fid=24052804347833783
@Kevinjoa you can add this in first post

great job Kevin and others. OG's got a new life now

This is for GEEHRC, can I flash it with CWM philtouch recovery? It says status 7. Anyone can help? My device is F180
Thanks

thangbomhl said:
This is for GEEHRC, can I flash it with CWM philtouch recovery? It says status 7. Anyone can help? My device is F180
Thanks
Click to expand...
Click to collapse
+1 for e970

OMGMatrix said:
+1 for e970
Click to expand...
Click to collapse
Its ok now after flashed TWRP. Thanks Kevin

Latest SuperSU Beta from chainfire also works for root access: https://download.chainfire.eu/743/SuperSU/BETA-SuperSU-v2.52.zip
You can set undervolt with KernelAdiutor from playstore, for example.

thangbomhl said:
Its ok now after flashed TWRP. Thanks Kevin
Click to expand...
Click to collapse
Does this mean the ROM can be flashed on the E970 and it works?

Im not sure with e970. Why dont u try.
Sent from my AOSP on Geehrc using Tapatalk

RRO/Layers works as it should also just in case anyone was wondering

thangbomhl said:
Im not sure with e970. Why dont u try.
Sent from my AOSP on Geehrc using Tapatalk
Click to expand...
Click to collapse
I have installed it on my E970 and it's up and running. Will report any issues tomorrow.

@Kevinjoa seems browser fc while downloading is due to lack of storage permission. giving the permission to browser via App permission setting fixes the problem.

If you use jolla-TWRP or other recovery, you should fix update script to flash normally.

akahroba said:
@Kevinjoa seems browser fc while downloading is due to lack of storage permission. giving the permission to browser via App permission setting fixes the problem.
Click to expand...
Click to collapse
Hmm, I've seen this in logcat but for apps permissions only play services are shown to me.
edit: wrong place, need to look in apps and then browser and permissions, activating write external storage permisison fixes it.
Gesendet von meinem Optimus G mit Tapatalk

@Kevinjoa Can I upload your rom with fixed update-script?
And, I think you can delete abort parts from update-script for e975 recovery users.

Genie's said:
If you use jolla-TWRP or other recovery, you should fix update script to flash normally.
Click to expand...
Click to collapse
Yes hope i can flash it with philztouch because all my backup and stuff is there
Sent from my AOSP on Geehrc using Tapatalk

Update AOSP 6.0 rom
Updated release (v2) (11.10.15):
Changelog:
-Fix NFC (bring back nxp stack which google removed and make relocations of api23+ apps warnings instead of fatal errors again)
-Add the GMS location provider name (important for apps uisng gps)
-GPS: Update blobs from nexus 7 2013 (flo) m release
-Build powerhal for msm8960 (fix touchboost)
Download

[ROM][PORT] Finomenal Oreo [TW][8.0][24/06/2018]

Note:You are not allowed to take any files from this port without my permission.
Kangers will face strict action. Beware! You have been warned.
Team Exynos 7870 presents
*****Finomenal Oreo*****
Based on J6 INS sources
Features:
-minimal
-all basic functions intact
-nitial build
-more coming soon
-(post will be updated later)
Downloads:
Build#1-[url]https://androidfilehost.com/?fid=674106145207497983[/URL]
PATCH#1 (IMPORTANT)- https://androidfilehost.com/?fid=746163614322275825
Installation:
Make sure you have latest twrp installed
Make sure you have latest modem and bootloader installed from latest Stock Rom
Make sure your phone is fully charged to 100%.
Download the ROM and transfer to your phone (ExtSD is suggested)
Boot the phone into Recovery Mode
Do a FULL wipe: Dalvik Cache, Cache, Data, System even if coming from a port rom
Flash The Rom
Flash Magisk 16.04-beta
The first boot may take 15 min
Reboot and profit !
Credits:
-Team Exynos7870
- @Exyking (Base provider)
- @prashantp01 (fixups and editing)
- @DarkLord1731 (fixups)
- @ananjaser1211 (massive thanks for the kernel source and patches)
- @parth111999 (features and fixups)
- @SuperR. (Superr Kitchen)
- @topjohnwu (Magisk SU)
- many more to go
Testers:
- @Cakzemprongzzz
- @razkal1
Sources:
Kernel- https://github.com/mohi1117/android_kernel_samsung_exynos7870
XDAevDB Information
Finomenal Oreo Port, ROM for the Samsung Galaxy J7-Pro
Contributors:
@mohi1117 @Exyking
@ananjaser1211
ROM OS Version: 8.0 Oreo
ROM Kernel: Linux 3.18.x
ROM Firmware Required: Latest Bootloader/modem
Based On: TouchWiz Oreo
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 23-06-2018
Created: 23-06-2018
Last Updated: 24-06-2018​

reserved

Changelog:
23-06-2018
-initial build
-more to go
24-06-2018
-fixed navbars
-some fixes under the hood
Bugs:
-expect bugs as this is my first port
Tweak Guide:
BADLOCK [GOOD LOCK2018]
- thanks to @parth1119999 for sharing a single awesome thread for Good Lock 2018 thread
- visit his thread here -[url]https://forum.xda-developers.com/galaxy-s9-plus/themes/app-t3805967[/URL]
- only use minimal zip
- all credits to BadLock Dev @sathishtony for making this awesome good lock launcher and @parth1119999 for resharing
- My Favorite one are LockStar and Task Manager. Try it
Substratum/Sungstratum:
-N number of Substratum themes are supported in TW oreo
- Try Yoru Substratum for black and dark Pixel theming and Pixel Fonts-[url]https://play.google.com/store/apps/details?id=com.ohayoubaka.yoru&hl=en_IN[/URL]
or
Victory Substratum (My Favorite) - https://play.google.com/store/apps/details?id=it.folgore95.viktoria&hl=en_IN
-all credits to substratum community, core developers and theme developers. Im merely resharing. Enjoy!​

Those who are interested in donating can pm for details. Thanks.

nice work my boiiiiiiiii...... keepp going

Nice Work Mate
Keep Goin Onn:good:

WOWWWWWW

mohi1117 said:
reserved#1
Click to expand...
Click to collapse
I won't find any of my files inside your rom, right?

Downloading......

You are the best ????

corsicanu said:
I won't find any of my files inside your rom, right?
Click to expand...
Click to collapse
i guess u didnt shared any.......

Exyking said:
i guess u didnt shared any.......
Click to expand...
Click to collapse
On xda, no, he got the day before yesterday access to my oreo test zip, which was pretty bugless and he said his port is bugged and his deal is aosp anyway, he doesn't care about tw.
Question, why is this your concern?
Sent from my SM-A520F using Tapatalk

corsicanu said:
I won't find any of my files inside your rom, right?
Click to expand...
Click to collapse
no. nothing. not until you work for samsung oem (as this is very minimal rom and not a single feature or stuff from any other rom.)

corsicanu said:
On xda, no, he got the day before yesterday access to my oreo test zip, which was pretty bugless and he said his port is bugged and his deal is aosp anyway, he doesn't care about tw.
Question, why is this your concern?
Sent from my SM-A520F using Tapatalk
Click to expand...
Click to collapse
btw as u say u shared him tomorrow i have some things to show u he shared me this stable zip many days ago ,
no tension mate its no a kang or any think like it
attaching some ss ,whiich says he stabled and shared me zip many days ago before u ave him acess...
see down attached pic with date says its of 21 junne and msg down slates word stable u can see it
And yes its my concern As He Is My Team Mate If Any One Says Wrong For Him I can Defent up If He Is Right...........

Those who are interested in donating can pm for details. Thanks.

is oreo on 64 bit or 32?

mohi1117 said:
Note:You are not allowed to take any files from this port without my permission.
Kangers will face strict action. Beware! You have been warned.
Team Exynos 7870 presents
*****Finomenal Oreo*****
Based on J6 INS sources
Features:
-minimal
-all basic functions intact
-nitial build
-more coming soon
-(post will be updated later)
Downloads:
Build#1-[url]https://androidfilehost.com/?fid=674106145207497983[/URL]
Installation:
Make sure you have latest twrp installed
Make sure you have latest modem and bootloader installed from latest Stock Rom
Make sure your phone is fully charged to 100%.
Download the ROM and transfer to your phone (ExtSD is suggested)
Boot the phone into Recovery Mode
Do a FULL wipe: Dalvik Cache, Cache, Data, System even if coming from a port rom
Flash The Rom
Flash Magisk 16.04-beta
The first boot may take 15 min
Reboot and profit !
Credits:
-Team Exynos7870
- @Exyking (Base provider)
- @prashantp01 (fixups and editing)
- @DarkLord1731 (fixups)
- @ananjaser1211 (massive thanks for the kernel source and patches)
- @parth111999 (features and fixups)
- @SuperR. (Superr Kitchen)
- @topjohnwu (Magisk SU)
- many more to go
Testers:
- @Cakzemprongzzz
- @razkal1
Sources:
Kernel- https://github.com/mohi1117/android_kernel_samsung_exynos7870
XDAevDB Information
Finomenal Oreo Port, ROM for the Samsung Galaxy J7-Pro
Contributors:
@mohi1117 @Exyking
@ananjaser1211
ROM OS Version: 8.0 Oreo
ROM Kernel: Linux 3.18.x
ROM Firmware Required: Latest Bootloader/modem
Based On: TouchWiz Oreo
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 23-06-2018
Created: 23-06-2018
Last Updated: 23-06-2018​
Click to expand...
Click to collapse
Wew Stable TW Oreo Finally

Her rom is incredible and beautiful. One question, do you have to remove this navigation bar? Thanks.

NathyAndrade said:
Her rom is incredible and beautiful. One question, do you have to remove this navigation bar? Thanks.
Click to expand...
Click to collapse
It have auto hide switch just like s8. Set it to on

H2ckerNorg said:
is oreo on 64 bit or 32?
Click to expand...
Click to collapse
32 bit