Super long story short. Didn't backup EFS.. I can't wipe phone with KDZ not sure whyvalwya sfails
Anyway no matter what ROM I use modem sucks keeps dropping signal and freezes a bit. I have tried flashing c/m/r/b modems and either they don't work or random disconnected
I need this fixed....and last time I flashed stock B that did work modem was as fast as 3G
quick question with kdz are you plugging the usb cable in a USB 3.0 connection? I know that causes issues
vel0city said:
quick question with kdz are you plugging the usb cable in a USB 3.0 connection? I know that causes issues
Click to expand...
Click to collapse
i have onboard usb3 and a front card reader section which i believe has USB2
But this docent explain every rom not being able to stay connected to the network
enzodad said:
i have onboard usb3 and a front card reader section which i believe has USB2
But this docent explain every rom not being able to stay connected to the network
Click to expand...
Click to collapse
Yeah I am just wondering since you said KDZ failed for you. Switching to the usb 2.0 might fix your KDZ fails. KDZ with the 20b to stock lollipop, then root it and get twrp. Then flash Blisspop and that should fix your modem issues where you don't get 4g lte or 4g lte is not sticking. From there you can flash what ever rom you want. So after a successful KDZ flash just follow my instructions here:
http://forum.xda-developers.com/tmobile-lg-g3/help/lte-lollipop-issue-fix-t3075637
I'll try your method is there a Linux way to KDZ? I tried KDZ on every USB port two different windows 7 installations. Tot works never KDZ
Also I super appreciate you helping me lol I'm about to run over phone with suv
enzodad said:
I'll try your method is there a Linux way to KDZ? I tried KDZ on every USB port two different windows 7 installations. Tot works never KDZ
Also I super appreciate you helping me lol I'm about to run over phone with suv
Click to expand...
Click to collapse
Unfortunately I do not know a Linux version for KDZ. When you are using the LG flash tool you did install the drivers correctly and have usb debugging on and all that? Plus make sure your computer recognizes your phone and you are able to access it via mtp, where you are able to access the internal sd and your external sd card from your computer. If that works, then shut down phone, hold the volume up button while plugging in the usb cable to a 2.0 port. Once in download mode your computer should be installing another driver too access the phone via download mode. That is my experience with the LG flash tool and it works every time, and since I experience that LTE issue I used the KDZ method a lot of times and never failed. By the way, what is the error message you get on the LG Flash tool when you flash KDZ?
FYI.
If you want since you already have TWRP and Root just flash the Blisspop rom and flash the stock 20b stock image from my thread. Just ignore the KDZ or use TOT first then root it and get TWRP and flash blisspop, but either way try to flash the Blisspop 2.3 rom from April 4, 2015 and see if that works
vel0city said:
Unfortunately I do not know a Linux version for KDZ. When you are using the LG flash tool you did install the drivers correctly and have usb debugging on and all that? Plus make sure your computer recognizes your phone and you are able to access it via mtp, where you are able to access the internal sd and your external sd card from your computer. If that works, then shut down phone, hold the volume up button while plugging in the usb cable to a 2.0 port. Once in download mode your computer should be installing another driver too access the phone via download mode. That is my experience with the LG flash tool and it works every time, and since I experience that LTE issue I used the KDZ method a lot of times and never failed. By the way, what is the error message you get on the LG Flash tool when you flash KDZ?
FYI.
If you want since you already have TWRP and Root just flash the Blisspop rom and flash the stock 20b stock image from my thread. Just ignore the KDZ or use TOT first then root it and get TWRP and flash blisspop, but either way try to flash the Blisspop 2.3 rom from April 4, 2015 and see if that works
Click to expand...
Click to collapse
OKay im doing that now, I have all drivers i think im missing the one for download mode, that has to be it. i plugged phone in and switched between all settings make sure all drivers are on. Ill try get DL mode one on and flash Bliss and let you know here.
Thanks again for patience and help
enzodad said:
OKay im doing that now, I have all drivers i think im missing the one for download mode, that has to be it. i plugged phone in and switched between all settings make sure all drivers are on. Ill try get DL mode one on and flash Bliss and let you know here.
Thanks again for patience and help
Click to expand...
Click to collapse
Well the download mode should install the drivers automatically there is no extra drivers, but flash the Blisspop 2.3 rom and I really hope that should solve the issue
vel0city said:
Well the download mode should install the drivers automatically there is no extra drivers, but flash the Blisspop 2.3 rom and I really hope that should solve the issue
Click to expand...
Click to collapse
flashing now, one probloem my cheap ass has no internet just tether lol and when i put in DL mode i noticed ~!~ was there so no proper driver lol wtf-
enzodad said:
flashing now, one probloem my cheap ass has no internet just tether lol and when i put in DL mode i noticed ~!~ was there so no proper driver lol wtf-
Click to expand...
Click to collapse
Yup that would cause the issue with KDZ then
vel0city said:
Yup that would cause the issue with KDZ then
Click to expand...
Click to collapse
plugged in phone- not showing ! anymore but didnt install driver, installed Bliss the one you said to and on first boot crashed pulled batter crashed again said CM account or something stopped working can even turn screen on unless pull battery- cheateed and diddnt unlock phone just pulled down- had to change APN or wouldnt connect but now trying reboot then flash stock B see if work(follow insturctios)
enzodad said:
plugged in phone- not showing ! anymore but didnt install driver, installed Bliss the one you said to and on first boot crashed pulled batter crashed again said CM account or something stopped working can even turn screen on unless pull battery- cheateed and diddnt unlock phone just pulled down- had to change APN or wouldnt connect but now trying reboot then flash stock B see if work(follow insturctios)
Click to expand...
Click to collapse
Hmm that is wierd flashing the Blisspop rom and have it crash. Never came across anyone with that issue yet. When you flash Blisspop did you wipe everything beside the external SD card in Twrp before installing the rom?
vel0city said:
Hmm that is wierd flashing the Blisspop rom and have it crash. Never came across anyone with that issue yet. When you flash Blisspop did you wipe everything beside the external SD card in Twrp before installing the rom?
Click to expand...
Click to collapse
yes ill try one more time, NOOB question if it works im going to flash Stock B~ should i full wipe again or dirty over Bliss, and i know bliss hates me, i installed a version 4 days ago and it worked for 20 min or so then deceided it wanted to optimize apps over and over and over lol i
ANd im trying KDZ again i forgot no EX SD card but good news KDZ is working now so ill do that twrp su install Bliss and get back to you im a tard sometimes
enzodad said:
yes ill try one more time, NOOB question if it works im going to flash Stock B~ should i full wipe again or dirty over Bliss, and i know bliss hates me, i installed a version 4 days ago and it worked for 20 min or so then deceided it wanted to optimize apps over and over and over lol i
ANd im trying KDZ again i forgot no EX SD card but good news KDZ is working now so ill do that twrp su install Bliss and get back to you im a tard sometimes
Click to expand...
Click to collapse
You can wipe it if you want.
vel0city said:
You can wipe it if you want.
Click to expand...
Click to collapse
So i KDZ R back on because B was **** lol any way no network but after 3/4 restarts from rooting it was on, then off lol so i set to 2g changed APN and now seems working great
so far zero drops or freezes, Flashed Prime Tether and will test through the night.
I beleive flashing the bliss pop did the trick
Are you getting LTE service on R? I could not get LTE back on R once I went to 20b but never rooted or flashed Blisspop.
enzodad said:
So i KDZ R back on because B was **** lol any way no network but after 3/4 restarts from rooting it was on, then off lol so i set to 2g changed APN and now seems working great
so far zero drops or freezes, Flashed Prime Tether and will test through the night.
I beleive flashing the bliss pop did the trick
Click to expand...
Click to collapse
Good news man, hope it continues to work for you man
huntnyc said:
Are you getting LTE service on R? I could not get LTE back on R once I went to 20b but never rooted or flashed Blisspop.
Click to expand...
Click to collapse
Yup i do and not one hiccup. It took a few min but it was worth it. Stable 4glte fast tether
huntnyc said:
Are you getting LTE service on R? I could not get LTE back on R once I went to 20b but never rooted or flashed Blisspop.
Click to expand...
Click to collapse
Flash the blisspop rom and it should fix the lte issue. Just remember to back up your current rom via twrp. Then flash the blisspop rom, once confirmed 4g lte is stable restore backup and you should be good to go with no hassle of setting up new phone.
vel0city said:
Flash the blisspop rom and it should fix the lte issue. Just remember to back up your current rom via twrp. Then flash the blisspop rom, once confirmed 4g lte is stable restore backup and you should be good to go with no hassle of setting up new phone.
Click to expand...
Click to collapse
Thanks will try if needed but I had no LTE problems after KDZ 20b without root for now.
Related
So, I had a rooted, stock install of ICS (FF18) as well as AGAT. I decided I wanted to try out Cyanogen, so after trying unsuccessfully for a number of hours, I discovered Resurrection Remix, installed it, and it was working great. Only problem is, I had no base band and could not connect to my cell network or use WiFi. I tried installing it a few more times with different modems and none worked, so I flashed back to FF18 and got that all set back up. I read somewhere that you should try using a stock JB install before installing RR, so I flashed a JB ROM, and had the same issues with no working modem/baseband. So now I decided to just give up and go back to ICS, but I'm having an issue doing that. My USB does not function at all. It charges, but does not show up on my computer, nor can I ODIN it. I've tried all the tricks on here (Re-installing drivers, different cable/computer, *#7284) and it still will not work. I can't exactly reflash it without ODIN or CWM, and am at a loss as to what to do. Thanks for any help.
I should mention that this JB ROM is rooted, but I can't seem to access anything on my SD card, so transferring files seems to be out of the question.
I'm not familiar with this resurrection remix rom. I did a quick google search and it appears to be for other versions of galaxy s2. You cant use a rom from any other model device with Epic 4g Touch. Im amazed it booted.
Exactly what JB rom are you running? There is always bluetooth to transfer files and mobile odin to flash a new kernel.
oh no. the s2 is NOT the epic 4g touch!
You can try to use mobile odin to reflash a epic 4g touch rom. Cyanogenmod would work fine if you used the rom for your phone located on xda and not on the get.cm site...
calisro said:
oh no. the s2 is NOT the epic 4g touch!
You can try to use mobile odin to reflash a epic 4g touch rom. Cyanogenmod would work fine if you used the rom for your phone located on xda and not on the get.cm site...
Click to expand...
Click to collapse
I would do that but I have no other Bluetooth devices to transfer with (Excapt maybe I can borrow a friend's iPhone) and for whatever reason it's not mounting the SD card. I'm thinking the USB drive simply died, because the first few times I booted into the RR rom, everything worked, other than the radio of course.
someguyatx said:
I'm not familiar with this resurrection remix rom. I did a quick google search and it appears to be for other versions of galaxy s2. You cant use a rom from any other model device with Epic 4g Touch. Im amazed it booted.
Exactly what JB rom are you running? There is always bluetooth to transfer files and mobile odin to flash a new kernel.
Click to expand...
Click to collapse
It was working perfectly fine (Other than the radio), until I put the stock one on there. I can't find the link for it now.
why do u need bluetooth. you said it boots.... open a browser and download mobile odin, mobile odin kernel module, and a rom.
calisro said:
why do u need bluetooth. you said it boots.... open a browser and download mobile odin, mobile odin kernel module, and a rom.
Click to expand...
Click to collapse
WiFi doesn't work along with the rest of the modem stuff. Bluetooth is the only thing I can get working. Sorry, I forgot to mention that before.
Echo35 said:
WiFi doesn't work along with the rest of the modem stuff. Bluetooth is the only thing I can get working. Sorry, I forgot to mention that before.
Click to expand...
Click to collapse
well if u can get those files on there and you have a root then you may not have a brick... if you can, try mobile odin like I said or try this guide... (manual method in 2nd post using connectbot to get shell access
http://forum.xda-developers.com/showthread.php?t=1865102
calisro said:
well if u can get those files on there and you have a root then you may not have a brick... if you can, try mobile odin like I said or try this guide... (manual method in 2nd post using connectbot to get shell access
http://forum.xda-developers.com/showthread.php?t=1865102
Click to expand...
Click to collapse
That was the plan, but like I said, I can't seem to mount an SD card either. Is there any way of getting files on there at this point other than bluetooth? I know I have root and I've got the FF18 Odin rom still, so I guess all I really need is a way to get that and Mobile Odin on there, which is of course, the real problem here.
EDIT: I should also mention that CWM is no longer on there since it's a stock ROM. All I have is root.
your options are wifi, usb, sdcard, bluetooth, 3g... so if none are working then just bluetooth which will be challenging in itself. I think you'll neef to rename the files to things like .jpeg for bluetooth to transfer them. good luck.
calisro said:
your options are wifi, usb, sdcard, bluetooth, 3g... so if none are working then just bluetooth which will be challenging in itself. I think you'll neef to rename the files to things like .jpeg for bluetooth to transfer them. good luck.
Click to expand...
Click to collapse
I'll borrow a friend's phone tomorrow and give that a shot.
Buy a usb bluetooth adapter and use a pc. They can be found at any store that sells pc accessories for a few bucks. Also many new laptops have built in bluetooth.
In the future only download roms from here
someguyatx said:
Buy a usb bluetooth adapter and use a pc. They can be found at any store that sells pc accessories for a few bucks. Also many new laptops have built in bluetooth.
Click to expand...
Click to collapse
I actually have one, but I couldn't manage to get it working (It's really old, newest drivers are for Vista).
Can you get to dl mode? If so try stock EL29 one click exe. Probably won't work, but it's worth a try good luck
byrdcfmma said:
Can you get to dl mode? If so try stock EL29 one click exe. Probably won't work, but it's worth a try good luck
Click to expand...
Click to collapse
Yes, however, it won't connect to Odin, which leads me to believe the USB is simply fried. It was being a bit unstable all week now that I think about it.
Also Bluetooth didn't work. I guess that part is borked as well.
Echo35 said:
Yes, however, it won't connect to Odin, which leads me to believe the USB is simply fried. It was being a bit unstable all week now that I think about it.
Also Bluetooth didn't work. I guess that part is borked as well.
Click to expand...
Click to collapse
Possibly done then. By flashing a Rom that was not for the phone, it's looking in the wrong place for the usb.
if you can get the files on your phone (mobile odin, mobile odin kernel flasher, a e4gt rom) you may be able to fix it... but you have to either get them on there or have a working usb to use pc odin.
also try a different usb cable and usb ports on the pc.
if all else fails your sending it off for jtag.
byrdcfmma said:
Possibly done then. By flashing a Rom that was not for the phone, it's looking in the wrong place for the usb.
Click to expand...
Click to collapse
Shouldn't Odin still work though? I thought download mode was independent of the ROM.
Echo35 said:
Shouldn't Odin still work though? I thought download mode was independent of the ROM.
Click to expand...
Click to collapse
he replaced the bootloader with a s3 bootloader
Now my next question, will MDPA actually replace it since I have insurance (Probably not) or should I just go ahead and mail it in to MobileTechVideos?
Echo35 said:
Now my next question, will MDPA actually replace it since I have insurance (Probably not) or should I just go ahead and mail it in to MobileTechVideos?
Click to expand...
Click to collapse
you can prob just buy a $5 jig.
I currently rooted using the latest version of the Sons of Android ROM. Last night I made a back-up of it and flashed the Synergy ROM to test it for a friend. When I restored my back-up, I could no longer connect to the computer. I tried to reinstall the drivers through Kies and also direct from Samsung. The phone charges when connect to the USB port, but does not connect. I have tried two computer so I think it is the phone.
I search the forums and didnt find anything that help.
Does anyone have any suggestions?
Thank you!
Huskerjeff said:
I currently rooted using the latest version of the Sons of Android ROM. Last night I made a back-up of it and flashed the Synergy ROM to test it for a friend. When I restored my back-up, I could no longer connect to the computer. I tried to reinstall the drivers through Kies and also direct from Samsung. The phone charges when connect to the USB port, but does not connect. I have tried two computer so I think it is the phone.
I search the forums and didnt find anything that help.
Does anyone have any suggestions?
Thank you!
Click to expand...
Click to collapse
Make sure fast charge isn't selected.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
KorGuy123 said:
Make sure fast charge isn't selected.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I can not find any fast charge setting. I am starting to worry that I might have damaged the phone. I hope I just need to re-flash a driver or something.
Thank you!
make sure you're using the factory cable for the device.
try another USB port, preferably a port directly connected to the computers motherboard.
delete the current USB drivers for your phone on the computer. reboot it. in task manager, stop any kies background processes. reinstall drivers. reboot and see if that takes.
Huskerjeff said:
I currently rooted using the latest version of the Sons of Android ROM. Last night I made a back-up of it and flashed the Synergy ROM to test it for a friend. When I restored my back-up, I could no longer connect to the computer. I tried to reinstall the drivers through Kies and also direct from Samsung. The phone charges when connect to the USB port, but does not connect. I have tried two computer so I think it is the phone.
I search the forums and didnt find anything that help.
Does anyone have any suggestions?
Thank you!
Click to expand...
Click to collapse
Did you make a nandroid of the previous rom ? Flash back to that . Flashing any rom made for the NA version of the Galaxy s3 will NOT brick your phone. NO physical damage will happen in any way.
Yes check the cord to make sure its not that....samsung phones are picky....even with the same cord.
Fast charge is usually in the kernel settings menu. It will be something you would had to enable, I've never seen it come enabled on a rom. What kernel are you on ? I don't think you see that setting on TW based rom's anyway ( I assume you are on SoA right now?)
Have you tried to do a complete wipe and flash another rom ?
hednik said:
Did you make a nandroid of the previous rom ? Flash back to that . Flashing any rom made for the NA version of the Galaxy s3 will NOT brick your phone. NO physical damage will happen in any way.
Yes check the cord to make sure its not that....samsung phones are picky....even with the same cord.
Fast charge is usually in the kernel settings menu. It will be something you would had to enable, I've never seen it come enabled on a rom. What kernel are you on ? I don't think you see that setting on TW based rom's anyway ( I assume you are on SoA right now?)
Have you tried to do a complete wipe and flash another rom ?
Click to expand...
Click to collapse
I have a nandroid of my stock (after rooted) ROM, but it is on my computer now, not on the phone so I cant access it. I also had a nandroid of Sons of Android that was connecting just fine before I flashed Synergy ROM. I restored the Sons of Android ROM (nandroid) that was still on my external SD card and that didnt fix it.
I just did a complete wipe (Cache, Davlik Cache, System, Factory Reset, and Internal Memory), then installed the Wicked ROM with the stock kernel. It still doesnt work.
I tried two different cord on two different computers with no luck.
Thank you!
Is your usb debugging enabled?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4 Beta
Huskerjeff said:
I have a nandroid of my stock (after rooted) ROM, but it is on my computer now, not on the phone so I cant access it. I also had a nandroid of Sons of Android that was connecting just fine before I flashed Synergy ROM. I restored the Sons of Android ROM (nandroid) that was still on my external SD card and that didnt fix it.
I just did a complete wipe (Cache, Davlik Cache, System, Factory Reset, and Internal Memory), then installed the Wicked ROM with the stock kernel. It still doesnt work.
I tried two different cord on two different computers with no luck.
Thank you!
Click to expand...
Click to collapse
Completely remove the drivers on your PC and reinstall again. Also if you have kies remove that first.
Sent from my SAMSUNG-SGH-I747 using xda premium
Domoo said:
Is your usb debugging enabled?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4 Beta
Click to expand...
Click to collapse
USB Debugging is currently enabled, but I have tried it both ways.
I also am noticing my data connection is really, really slow, much slower than normal. I looked under the Synergy ROM and there was some talk of needing to reflash modem and bluetooth when reverting to a stock kernel. Could this be the problem?
Thanks!
You could try mobile Odin and flash the rooted stock that way... Its a shot
You have to use a .tar file though
Sent from my SAMSUNG-SGH-I747 using xda premium
hednik said:
You could try mobile Odin and flash the rooted stock that way... Its a shot
You have to use a .tar file though
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Can you you give me some more info on Mobile Odin? I have never heard of it.
Last night I flashed the KT747 kernel because it has updated USB drivers, but it still didnt work.
I still have to believe that something went wrong when flashing the other night because that is when it stop work, but I am starting to think it is a hardware issue. It is very wierd!
Thank you!
Do you get any error when plugging it? I had a similar issue last week until I updated Windows.
BWolf56 said:
Do you get any error when plugging it? I had a similar issue last week until I updated Windows.
Click to expand...
Click to collapse
Nope, no error message. It just doesnt reconize it is there. I have tried three computers (Windows 7 - 64 Bit & (2) XP 32 Bit) and three different cords.
This sucks! Now I am hearting it from all the iPhone users.
Thanks!
Huskerjeff said:
Can you you give me some more info on Mobile Odin? I have never heard of it.
Last night I flashed the KT747 kernel because it has updated USB drivers, but it still didnt work.
I still have to believe that something went wrong when flashing the other night because that is when it stop work, but I am starting to think it is a hardware issue. It is very wierd!
Thank you!
Click to expand...
Click to collapse
Try this, same thing was happening to me on a rooted stock rom. The steps listed here helped me reconnect phone to PC.
http://blog.vacs.fr/index.php?post/...ot-detected-problem-on-Android-Samsung-phones
Huskerjeff said:
Nope, no error message. It just doesnt reconize it is there. I have tried three computers (Windows 7 - 64 Bit & (2) XP 32 Bit) and three different cords.
This sucks! Now I am hearting it from all the iPhone users.
Thanks!
Click to expand...
Click to collapse
Try wiping and flashing another ROM?
dratsablive said:
Try this, same thing was happening to me on a rooted stock rom. The steps listed here helped me reconnect phone to PC.
http://blog.vacs.fr/index.php?post/...ot-detected-problem-on-Android-Samsung-phones
Click to expand...
Click to collapse
I hope we are getting closer!
When is use the *#7284#, I get the UART section that is on PDA and I cant change it.
Under the USB section I have button that says "Qualcomm USB Settings" with a whole punch of options:
MTP
MTP + ADB
PTP
PTO + ADB
RNIS + DM + MODEM
RMNET + DM + MODEM
DM + MODEM + ADB
Should I use one of these settings?
Thank you!
Huskerjeff said:
I hope we are getting closer!
When is use the *#7284#, I get the UART section that is on PDA and I cant change it.
Under the USB section I have button that says "Qualcomm USB Settings" with a whole punch of options:
MTP
MTP + ADB
PTP
PTO + ADB
RNIS + DM + MODEM
RMNET + DM + MODEM
DM + MODEM + ADB
Should I use one of these settings?
Thank you!
Click to expand...
Click to collapse
You should have two options, MODEM and PDA. Mine is set to MODEM.
Still no luck! Very Frustrating!
I used Mobile Odin to flash back completely to stock, and the usb still would not connect. I do not know what else to do. I will have to remove the SD Card and use a card reader for now. I can flash back to stock when if I want to take it in and get it fixed or replaced.
Huskerjeff said:
Still no luck! Very Frustrating!
I used Mobile Odin to flash back completely to stock, and the usb still would not connect. I do not know what else to do. I will have to remove the SD Card and use a card reader for now. I can flash back to stock when if I want to take it in and get it fixed or replaced.
Click to expand...
Click to collapse
did u already try another cable, I had over 5 cables that suddenly stopped working for no reason, only charges but it doesn't connect to the pc..
so try another cable is my suggestion.
Hi friends. Long time lurker here.
I've had many Samsung phones and many other android devices, but this is my first brick.
I had flashed the rooted SM-T217s rom, and the wifi wasn't working, so I tried to reflash it, at which point everything went wonky. I searched the forums and found some threads on bricked 217s's, but nothing specific to my situation.
The tablet went to the emergency firmware update screen, and I haven't been able to get Kies to even recognize it. I try to Odin back to the latest stock (B8) but it fails at 'Get PIT for mapping.' My google-fu tells me this is not a good thing.
Am I hosed here? What else can I try?
Thanks XDA, you're my only hope.
joshuaerda said:
Hi friends. Long time lurker here.
I've had many Samsung phones and many other android devices, but this is my first brick.
I had flashed the rooted SM-T217s rom, and the wifi wasn't working, so I tried to reflash it, at which point everything went wonky. I searched the forums and found some threads on bricked 217s's, but nothing specific to my situation.
The tablet went to the emergency firmware update screen, and I haven't been able to get Kies to even recognize it. I try to Odin back to the latest stock (B8) but it fails at 'Get PIT for mapping.' My google-fu tells me this is not a good thing.
Am I hosed here? What else can I try?
Thanks XDA, you're my only hope.
Click to expand...
Click to collapse
Good news, I guess. I was able to flash TWRP recovery and the stock rooted rom from another computer, but now Wifi is borked and there's no network connection. HALP.
joshuaerda said:
Good news, I guess. I was able to flash TWRP recovery and the stock rooted rom from another computer, but now Wifi is borked and there's no network connection. HALP.
Click to expand...
Click to collapse
Okay well I fixed it.
Turns out, the problem was that I was using Odin on a VM on my Mac. I had tried to use a PC, but I think the USB controller was too old, so that failed too. I had to use Heimdall to flash each of the partitions from the B8 zip manually. It worked, and I'm back in business, though not rooted. I suppose I'll wait until there's a better way to root before I try it again.
254336992952
joshuaerda said:
Okay well I fixed it.
Turns out, the problem was that I was using Odin on a VM on my Mac. I had tried to use a PC, but I think the USB controller was too old, so that failed too. I had to use Heimdall to flash each of the partitions from the B8 zip manually. It worked, and I'm back in business, though not rooted. I suppose I'll wait until there's a better way to root before I try it again.
Click to expand...
Click to collapse
You should have made a backup. I used twrp recovery flashed a rom same thing wifi wouldnt work so I restored back. If you get it working again make a backup imo. Goodluck.
IAMRUDYT said:
You should have made a backup. I used twrp recovery flashed a rom same thing wifi wouldnt work so I restored back. If you get it working again make a backup imo. Goodluck.
Click to expand...
Click to collapse
same here, I have the rom, but hesitated on the firmware, waiting to see if someone gets the wifi working, not to many developers here for this tablet.
sm t217s
Ok guys. Heres my deal with this TAB. Ive rooted... Unrooted. wipe wipe wipe wippty wipe . WiFi not working. Fixed it with NB8. So here now I sit with:
----NB8 Wifi works---
----TWRP-----
Yup, pathetic i know. I cant even get the supersu to flash. TWRP wont move it over to flash off external sd card. Im not hip to abd plus i heard you leave yourself wide opento visitors when using that.
Ive eye hustled a thread on here that some friends are getting back together to rock it on a custom rom so my fingers are crossed. This tab is so neglected i mayjust go get the 210r. But i really dont want to. So my question is....
Can someone please give me links to files that work with the NB8 stock firmware. Some of the links are outdated after sprint uploaded the new bootloader. We are a small community on this tab so lets stick together on this. I dont think cynogen isgoing to do anything for it. As they concentrate on thier new phone which looks pretty sweet by the way. K im done. Going to wait for help and play with this htc one s
thats been collecting dust.
Rooted
Sent from my SM-T217S using XDA Premium 4 mobile app
Ok so i bought a phone from a guy on craigslist a couple months ago and everything was fine its a sprint lg g2 that was running a tmobile rom he said never had an issue with it.. today i was working on my motorcycle and i must have hit system update in my pocket :/ well i have been trying to fix this phone for about 8 hrs now and im not having much luck.. first i tried to flash a new rom but couldnt get the drivers to be recognized by any computer i tried.. so i resorted to the flash tool and thinking i had a sprint g2 i downloaded the stock sprint .tot and dll. files the flash tool thinks my phone is a d801at so i downloaded the appropriate files and flashed again and it worked flawlessly i thought now the phone just force shuts down and reboots and if you lock the screen it reboots i have tried flashing it again and again and also preforming a factory reset from the phone im lost and dont know what to do if you could lead me to water i will drink lol but im lost and dont even know where to begin please help as i need my phone
someone please help...
if the build.prop was edited to make it think it was a different phone other then the sprint lg g2, you would have to fix the build.prop then re use the flash tool and tot it back to sprint stuff. You may have to flash a zip in recovery (if you have custom recovery), to fix the build prop. Make sure you have the latest drivers installed on the computer and try different usb ports and cords as well if the drivers aren't installing.
jcwxguy said:
if the build.prop was edited to make it think it was a different phone other then the sprint lg g2, you would have to fix the build.prop then re use the flash tool and tot it back to sprint stuff. You may have to flash a zip in recovery (if you have custom recovery), to fix the build prop. Make sure you have the latest drivers installed on the computer and try different usb ports and cords as well if the drivers aren't installing.
Click to expand...
Click to collapse
I have the drivers installed now i dont really know how to edit the build prop but could probably figure it out but the problem is i dont have a custom recovery and I only have a maximum of 45 sec to root and install one lol If i press to many buttons on my phone it reboots or says error
brickedg2 said:
I have the drivers installed now i dont really know how to edit the build prop but could probably figure it out but the problem is i dont have a custom recovery and I only have a maximum of 45 sec to root and install one lol If i press to many buttons on my phone it reboots or says error
Click to expand...
Click to collapse
Post your issue on this thread. XxZombiePikachu is real helpful there. http://forum.xda-developers.com/showthread.php?t=2692223
Sent from my XDABBEB VS98024A v1.2.1 using XDA free mobile app
You had a Rom called "Justin's Rom" on it. Many people had this issue. Take your SIM card out, go back to stock using the flash tool, root with auto rec, then flash cloudystock.it works for tmobile out of the box.
http://forum.xda-developers.com/showthread.php?t=2661866
Also read my post
http://forum.xda-developers.com/showthread.php?t=2729370
i think my tab has just brick.
i accidentally wipe out my android using twrp ....basically everything (system data,caches,sdcard,rom)
but i can access the #download mood and #twrp (TWRP_T31x_r3).
.
.
.let me know if anyone or anything can help .it will be a life saving
i'm now trying to install different #rom whomever can find.
my device is Samsung galaxy tab 3 model sm-t310
(i'm a new user.please don't mind if you have problem with reading it)
apon tj said:
i think my tab has just brick.
i accidentally wipe out my android using twrp ....basically everything (system data,caches,sdcard,rom)
but i can access the #download mood and #twrp (TWRP_T31x_r3).
.
Click to expand...
Click to collapse
If you can access download mode, there is no problem to flash back the system.
Go to sammobile, look for the ROM of your model, download and flash it with Odin.
I did the same thing when wiping out OS.
i tried with as many rom as i can find in xda but odin fail every-time .
unfortunately i didn't have a backup of my original rom .
is there anything else i can do or i should find more rom and try again & again !!!
apon tj said:
i tried with as many rom as i can find in xda but odin fail every-time .
unfortunately i didn't have a backup of my original rom .
is there anything else i can do or i should find more rom and try again & again !!!
Click to expand...
Click to collapse
Do what the previous post suggested and download the stock firmware from sammobile.com and use Odin (in download mode) to flash it.
Sent from my SM-G920V using Tapatalk
success
i download this rom and install with odin but at first odin got stuck at 98% and failed to load also then i lost my twrp too.
.
.
. after that i tried again and again but the result was same
but luckily i install the twrp again and the result was success:angel:
thanks to all of you who take there hard time and reply in this post for me
but my wifi isn't working.
what a pain
apon tj said:
but my wifi isn't working.
what a pain
Click to expand...
Click to collapse
If you're in Bangladesh, try to flash the ROM for your region.
Does your Wifi work before ? What ROM did you flash successfully ? When ask and lack of information, it's very hard for others to help you.
Make sure you have good USB cable and USB port when flashing.
Beut said:
If you're in Bangladesh, try to flash the ROM for your region.
Does your Wifi work before ? What ROM did you flash successfully ? When ask and lack of information, it's very hard for others to help you.
Make sure you have good USB cable and USB port when flashing.
Click to expand...
Click to collapse
no i got the rom of Saudi_Arabia cause i bought it from there.
i download it from www.sammobile.com/firmwares/database/SM-T310/#firmware
.
.i had to install the JB 4.2.2 if someone know how i could update kitkat manually 4.4.2 please let me know
i think my wifi isn't working since when i first root the device, when i turn wifi on its show my router name but when i try to connect its don't connect says connecting then(saved ,secured )
although before rooting it work's fine i even can update to 4.4.2 using my wifi.
the new rom has nothing to do with the wifi problem .i brick my device for trying to fix the wifi issue at the first place............. i'm guessing it's a root problem.
what can i do!???
apon tj said:
no i got the rom of Saudi_Arabia cause i bought it from there.
i download it from www.sammobile.com/firmwares/database/SM-T310/#firmware
.
.i had to install the JB 4.2.2 if someone know how i could update kitkat manually 4.4.2 please let me know
Click to expand...
Click to collapse
Try fo flash Cellular South
http://www.sammobile.com/firmwares/download/55354/T310UEUCOI1_T310XARCOI1_XAR/
OI1= Version 1, Released on 2015 ( O ), September ( I ), the newest build.
At start up of setting the tablet, if your Wifi cannot connect to any network, your Wifi built in is defective. The only way to fix Wifi issue: replace the mainboard. It costs only around
$45 for an used one.
Beut said:
Try fo flash Cellular South
http://www.sammobile.com/firmwares/download/55354/T310UEUCOI1_T310XARCOI1_XAR/
OI1= Version 1, Released on 2015 ( O ), September ( I ), the newest build.
At start up of setting the tablet, if your Wifi cannot connect to any network, your Wifi built in is defective. The only way to fix Wifi issue: replace the mainboard. It costs only around
$45 for an used one.
Click to expand...
Click to collapse
thanks but how come my hotspot is working, i can use shear it apps and connect through other device!!!
at first i guessed it would be hard wire problem but then if my wifi really is damage then the hotspot would not work either .
i could be wrong though........