Develop Bugs

[Q]Need clarification for rooted rogers note 2, android 4.4

Hello, I recently just updated my Rogers SGH-i317M to 4.3, which then downloaded a system update which put it at 4.4. I was running Jedi X20, which is based on 4.1.2, when I first tried updating, I flashed the "4.3param_tz" file in odin, and was left with an error screen saying I need to recover using Kies, so I downloaded the official release, flashed via odin, and thats how I got to where I am now. I want to try the "Ditto Note 3" rom, "Sky Note Air 4.3", "Mean Bean" and "Beanstalk". My main question is, can I just start flashing these roms like I was before on 4.1.2, or do I need to use the specific kernel listed on their page? Before you needed a specific kernel to run a touchwiz rom or an aosp rom, so is it still the same? Or can I use my stock 4.4 kernel and try both aosp and tw roms now? If so could you point out the kernels I would need? And educate me on anything else I should know about before flashing 4.3 and 4.4 roms, (I'm not worried about warranty), this would be greatly appreciated. Thanks for your time in reading this and helping me out, much appreciated!!

Regardless of where u are, I'd Odin to Rogers stock KK 4.4.2. Then Odin Twrp recovery, boot into twrp recovery and flash SU v.1.99. Finally choose your rom and flash away. This way you are on the lastest KK 4.4.2 Bootloader and KK Modem/Baseband.

just_visiting said:
Regardless of where u are, I'd Odin to Rogers stock KK 4.4.2. Then Odin Twrp recovery, boot into twrp recovery and flash SU v.1.99. Finally choose your rom and flash away. This way you are on the lastest KK 4.4.2 Bootloader and KK Modem/Baseband.
Click to expand...
Click to collapse
I did all that except flash SU 1.99, so I tried flashing SKynote Air and it didnt work, upon restarting my phone it said no os is available. So I tried restoring from the backup I made of the official 4.4.2 Samsung rom in twrp, didn't work. Tried Odin, didn't work. Then I tried flashing the Skynote rom again and it worked. So I'm afraid of flashing any other roms now.

How To Update and Root to 4.4.4

Hi, sorry this is probably a noob question but I've been reading through the forums and got confused how to update my rooted s4. Normally I would just install the custom rom with the update but it seems like this isnt the case right now.
I'm currently on 4.2.2, rooted, and have wicked as my rom. How would I update to 4.4.4? From what I understand there is a new modem and firmware... something to do with NH7? Can someone explain to me what NH7 does. Thanks for all your help!

NH7 is the newest firmware based on 4.4.4 and it is recommended if you plan of using 4.4.4 tw roms. To update it just download the NH7 firmware from general thread and flash it with Odin, after that you can use cf-auto root to root, or if you're just planning to flash a ROM then just flash recovery and then flash ROM.. If you care about tripping your Knox counter then just know that flashing recovery or rooting will trip it

babexdragon said:
Hi, sorry this is probably a noob question but I've been reading through the forums and got confused how to update my rooted s4. Normally I would just install the custom rom with the update but it seems like this isnt the case right now.
I'm currently on 4.2.2, rooted, and have wicked as my rom. How would I update to 4.4.4? From what I understand there is a new modem and firmware... something to do with NH7? Can someone explain to me what NH7 does. Thanks for all your help!
Click to expand...
Click to collapse
You mention that you want to update and that under normal circumstances you would simply flash the an updated custom ROM... yet you say you've read it isn't that simple, right?
You are correct, it isn't THAT simple, but it is ALMOST that simple. Being as that you are still on the old 4.2.2 pre-KNOX bootloader and all, you can flash and flash and flash all day long and a single use of Triangle Away is all you'd need to still be able to revert your device back to 100% stock, both firmware AND flash counters if you ever needed to for some reason. If you use Odin, Kies, or take an OTA update you will lose that ability. Anything you flash once you go through official channels to update will trip your KNOX counter... and that cannot be reset. The problems you've read about simply flashing an updated custom ROM is that you will have problems with data.
The data drops can be avoided by flashing the newest modem, which would be NH7. Understand though, that method only updates your GSM modem; your LTE modem would be unaffected. This would only be a problem though if you are having trouble receiving LTE where others with the same carrier can get it with no problem. If you aren't having any problems with LTE, then I would recommend to simply update your GSM modem and use the custom recovery of your choice (ClockWorkMod, Philz Touch, or TWRP) to flash any of the ROMs in the T-Mobile GS4 Android Development section.
To update your GSM modem, follow the instructions in this thread. That thread is for updating to the 4.4.2 NB4 modem, which that modem would actually be all you need; but if you wish to have the NH7 modem, just use the modem.bin ONLY file from this post instead of the modem package included in the tutorial thread. After that little bit of work, you can flash any Android version you want; from 4.2.2 all the way up to 4.4.4... AOSP, TouchWiz, or the Google Play Edition ROMs.

So from what I understand...
1. Update the modem not firmware
2. Flash ROM
So I don't need to re-root?

You are correct.
No need to re-root.

[Q] Which Firmware W/ Fresh SlimKat 9 Stable Install

Background: I attempted to update from SlimKat 7.0 stable to 9.0 stable and discovered my apn's were missing and when I try to add them manually it fails to save. I have also found others with this same issue but none have an easy fix. I'm on UCDLK3 firmware, after restoring to previous state using nandroid backup apn's are present. If I try to flash any ROM (even other than Slim) my apn's are missing, even a dirty flash of 7.0 over 7.0. I know I can fix this by flashing stock UCDLK3 and root/twrp/flash slim 9 and everything will likely work fine. I plan to do just that but want to make sure I'm doing things as smart and clean as possible. There is a lot of info out there and I'm finding it hard to sift through old stuff and find the current state of things.
Question: Is there an actual advantage if I upgrade the firmware from UCDLK3 to UCUEMJB while still planning to use SlimKat 9 Stable with BMS kernel and TWRP recovery? Are there any disadvantages? Either way what is the shortest path to get back to stock (either LK3 or MJB) and flash SlimKat?
Thanks

Your APN may not be sticking because your modem and bootloader may be too outdated.
Some of the latest CM11 and AOSP ROMs require a KK bootloader and modem.

And then there are some roms that require at least a 4.3 bootloader and modem, either the MJ2 (leaked) or MJB (official) bootlaoder/modem combos. I have seen mention of these working in some OPs and in the body of other threads. In some of the later TW ROMs you may have to use a custom kernel like kt747 or iBuddler's. I don't know if any kernel other than the stock in SlimKat and AOSP ROMs would be needed with the MJ2/MJB firmware and modem.
I don't know of any advantages other than some of the ROMs require firmware newer than DLK3 to properly boot, receive data, or have a working wifi. As far as disadvantages, KNOX was introduced with the MJB firmware and stock ROMs, once going to MJB or newer firmware you can not make firmware downgrades without a very real risk of hardbricking your phone. Also you will need to insure your baseband and modem versions match. If they do not you risk hardbricking of another variety.
I had not yet realized that the newer AOSP and CM11 required you to go all of the way to NE4, thank Audit.

Just wanted to close the loop on this thread and say thanks for the assistance!
I now have my phone working properly on SlimKat 9; it really was just the firmware not being compatible with newer ROMs as many have suggested. Here is the sequence I followed to do it but really it probably only needed a twrp flash of the mjb firmware and the ROM install:
1. Used odin to restore to stock LK3 (only because I had messed with things so much and wanted a clean slate)
2. Used odin to install TWRP 2.7.1.0 recovery
3. Rooted with SuperSU 2.40 using TWRP
4. Flashed combined MJB modem & bootloader using TWRP
5. Flashed SlimKat 9 using TWRP
6. Flashed Slim GApps using TWRP
7. Rooted with SuperSU 2.40 using TWRP (Lost root after flashing ROM)

thanks for posting fix. am sure it will help others. audit13 and dawgdoc , thank you for continued help with the awesome Slll. :good:
"all i can really do , is stay out of my own way and let the will of heaven be done"

jeff.leonard said:
Just wanted to close the loop on this thread and say thanks for the assistance!
I now have my phone working properly on SlimKat 9; it really was just the firmware not being compatible with newer ROMs as many have suggested. Here is the sequence I followed to do it but really it probably only needed a twrp flash of the mjb firmware and the ROM install:
1. Used odin to restore to stock LK3 (only because I had messed with things so much and wanted a clean slate)
2. Used odin to install TWRP 2.7.1.0 recovery
3. Rooted with SuperSU 2.40 using TWRP
4. Flashed combined MJB modem & bootloader using TWRP
5. Flashed SlimKat 9 using TWRP
6. Flashed Slim GApps using TWRP
7. Rooted with SuperSU 2.40 using TWRP (Lost root after flashing ROM)
Click to expand...
Click to collapse
When you restored to LK3, what Firmware version were you coming from? I'm looking to go to LK3 from the NJ1. However there seems to be cautionary red flags all over the place due to bootloader changes that were made in 4.3.

The OP was already on LK3 with a custom ROM.
Since you are on NJ1, you cannot downgrade the bootloader.

i747 or t999

i have rooted and unlocked galaxy s3(i don't know if it is t999 or i747)the imei and boatloader are for t999 and the android build is i747mvldlk4 4.1.1 official rom and i want to flash new rom but i don't know what i have to flash (t999 roms or i747)please help me....

What does it day in download mode? What about the baseband/modem version?

Best way to know for sure is to install terminal emulator and enter this:
getprop ro.bootloader
You may simply have a T999 running on an I747 based rom. The two are very compatible when it comes to custom roms.
Since it sounds like you are on pretty old firmware, you will probably need to fully update it before flashing a newer rom. Just remember to only flash firmware for your model device. So if it's a T999 do not flash I747 firmware. Once updated you can then flash custom roms from either device.
(Also check the sticker under the battery to see what model it says)

baseband:t999uvdmd5 and modem board is msm8260a

What about the bootloader?

boatloader:t999uvdmd5

And just for good measure, check the sticker under the battery.
You are currently running on T999 base firmware with an I747 based rom, so you can be pretty certain you've got a T999 model.
You'll want to flash one of the two latest firmwares for the T999. (NC2 or OH1 if I'm remembering correctly) (note that some roms may not flash on the newest OH1 firmware if they have been updated recently, so you may want to go with NC2 to make things a little easier for now.)
After flashing your firmware, flash a custom recovery and then from the recovery flash your choice of rom.
Hope that helps and good luck!

thanks so much for help....but i want to ask about the files which i need to download when i flash nc2 firmware please(do i need to download any files for modem and kernel or this files are downloaded automatially with the firmware file??

When you are dealing with firmware, it includes everything, unless otherwise stated. Download and unzip the firmware package. Then flash the .tar.md5 file with Odin. Back up data first of course, just in case.
Doing this will give you a fully updated, stock, unrooted device. Reroot using Towel root, or flash recovery then a rom if you choose.
If you haven't already, I suggest reading the first few posts of my firmware thread (sticky in dev section). There's already a lot explained there.

does flashing t999uvuenc2 relock my mobile network..and if that will happens what can i do to unlock without code

Once the phone has been unlocked via code or the free method, the phone should remain unlocked after flashing ROMs.

Yup, the unlock is permanent. You can safely flash firmware, roms, etc.

ihave flashed cm12.1 d2tmo on my t999.but the features of camera like full HD video recording and face detecting were lost..can I restore them on this rom

[SOLVED] I think my i747M may be soft bricked?

Hey all. I am fairly inexperienced when it comes to rooting, though I have done a few succesfully in the past. I currently have the newest version of TWRP installed on my Samsung I747M. The I747M I have is not from one of the major carriers, but as far as I am aware, the phone is factory network unlocked. Carrier is GCI, in Alaska.
I currently have a 4.4.2 Touchwiz Rom installed and started having problems after I attempted to flash the ROM Dandroid, which is 4.3 (http://forum.xda-developers.com/showthread.php?t=2121506). I had created a backup using TWRP before flashing the ROM and reverted back once I noticed the problem.
The main issue I am experiencing at this time is the Baseband Version, IMEI, and other information related to the modem is showing "Unknown" and features such as wifi will not toggle on.
I had also attempted to flash the most current version of the modem that I was able to find thru Odin. Odin showed the flash as successful. The version I flashed to the phone was I747MUMUEND3: modem_CWM_I747MUMUEND3.zip - 18.80 MB - April 3rd, 2014 (http://forum.xda-developers.com/showthread.php?t=1831898)
At this point, I can still get into recovery, download modem and I am able to boot up the phone and access most all functions. The next step I was going to try was going to be to flash back to stock firmware from sammobile's website (Was using to use the Roger's version of 4.4.2), though I don't want to cause more issues than I can handle or resolve thru software.
Any advice on how to proceed would be greatly appreciated or even just how to get the modem/wifi features functional again would be helpful. I'm just as happy staying on my current ROM at this point if I can get the phone fully functional again.

It's possible that the rom is not compatible with the kk modem and bootloader.
Flash cm12.1 to see if your imei comes back.

audit13 said:
It's possible that the rom is not compatible with the kk modem and bootloader.
Flash cm12.1 to see if your imei comes back.
Click to expand...
Click to collapse
Forgot to mention, this is something I did try. I attempted to flash Cyanogen Mod 12.1 (Download: cm-12.1-20151017-NIGHTLY-d2att.zip (286.76 MB) ) and most recent nightly build & the most recent stable release (CM11) (Download: cm-11-20140210-SNAPSHOT-M3-d2att.zip (194.37 MB) ). When flashing these, I transferred the downloaded ZIP file to the internal storage of the phone in the root directory and attempted to run an install from TWRP. Both installs failed.

Since the phone is an i747m, I recommend flashing back to stock using Odin 3.07 and stock ROM file from here: http://www.sammobile.com/firmwares/database/SGH-I747M/
The i747m versions are interchangeable between Rogers, Telus, and Bell.
After flashing back to stock, install TWRP using Odin 3007 from here: https://dl.twrp.me/d2att/twrp-2.8.7.0-d2att.img.tar
Create a nandroid backup using TWRP and then try to flash a custom ROM again.

audit13 said:
Since the phone is an i747m, I recommend flashing back to stock using Odin 3.07 and stock ROM file from here: URL REMOVED FROM QUOTE DUE TO NEW USER LIMITATIONS
The i747m versions are interchangeable between Rogers, Telus, and Bell.
After flashing back to stock, install TWRP using Odin 3007 from here: URL REMOVED FROM QUOTE DUE TO NEW USER LIMITATIONS
Create a nandroid backup using TWRP and then try to flash a custom ROM again.
Click to expand...
Click to collapse
I'll give that a shot when I get home. Stock firmware was one of my next thoughts. I have it downloading at the measly 15 Kbps offered for free from sammobile so hopefully should be done by the time I get home & update this thread with any progress.

Another possibility is a custom kernel, if you are wishing to stay with TouchWiz and not wanting to upgrade your bootloader and modem past 4.3.
Some of the 4.4.2 TW roms will run on 4.3 bootloader and modems using one of ibuddler's kernels or ktoonsez's TW kernel. This was discussed most in the Likewise ROM thread and links to the various versions of ibuddler's kernel may be found there. It may have also been discussed in TMS3KK thread. The ktoonsez kernel can be found in its own thread.
But, you may really want to consider a newer ROM in order to change to something with the stagefright fixes. I think any of these may require the latest 4.4.2 bootloader and modem. (What say you @audit13?)

dawgdoc said:
Another possibility is a custom kernel, if you are wishing to stay with TouchWiz and not wanting to upgrade your bootloader and modem past 4.3.
Some of the 4.4.2 TW roms will run on 4.3 bootloader and modems using one of ibuddler's kernels or ktoonsez's TW kernel. This was discussed most in the "http://forum.xda-developers.com/showthread.php?t=2725192"Likewise ROM thread and links to the various versions of ibuddler's kernel may be found there. It may have also been discussed in http://forum.xda-developers.com/showthread.php?t=2725750" TMS3KK thread. The http://forum.xda-developers.com/showthread.php?t=1756776" ktoonsez kernel can be found in its own thread.
But, you may really want to consider a newer ROM in order to change to something with the stagefright fixes. I think any of these may require the latest 4.4.2 bootloader and modem. (What say you @audit13?)
Click to expand...
Click to collapse
I'm not opposed to any of this. Mostly just trying to slim down this phone to the basics as much as I can and am quite open to any recommendations. Main thing I want to maximize is battery life & simplicity since this is for my wife and those are her major wants in a phone. I figure any kind of ROM that just covers the basics should cover my bases & would prefer one with a darker/black skin to maximize battery life w/ the OLED screen. I am in the process of flashing to the Roger's stock ROM as I type this w/ my fingers crossed.
Just to add, no over clocking or anything of that nature is desired. If I remember correctly I ended up putting the ktoonsez kernel on one of my handsets, either this Galaxy S3 or my Galaxy S5, though I can't recall which since it was so long ago.

Alright! So progress! Wifi, Baseband version, IMEI and all other missing information restored & now works w/ stock rom flash. In process of reflashing TWRP now.

Let us know what happens.

Still all good with TWRP installed. Have not flashed back on a custom ROM yet. After reviewing some of the above recommendations, I am kind of liking the looks & features of TMS3KK (http://forum.xda-developers.com/showthread.php?t=2725750) and feel it would suit my needs.
I factory reset, cleared cache, and cleared Dalvik thru TWRP & then made a back up. Prior to this, I confirmed everything was still working normally w/ phone fully loaded after TWRP was installed.
One of the things mentioned on the installation instructions for that ROM is the following:
---
Do not mix and match 4.3 firmware (bootloaders/modem) with the new 4.4.2 ones. You will hard brick and I warned you. This works the same as any 4.3 or ND8port ROM with 4.3 firmware and it can use the new 4.4.2 ones also.
Link to recovery flashable i747 and i747M 4.4.2 bootloader and modem packages: http://forum.xda-developers.com/gala...hable-t2856914
---
How would I go about confirming my current bootloader/modem versions to make sure they are both 4.4.2 before flashing this ROM? At the link provided, those files/links to the files were removed because they were causing some bricked devices per a note at the top of that thread. Here's a link to the thread I am referencing since the above link looks to be broken. (http://forum.xda-developers.com/gal...mware-ne4-ne6-nf2-recovery-flashable-t2856914)

If you flashed the latest stock rom, you are running the latest 4.4.2 bootoader and modem.
You can download and run the Samsung phone info app from the play store to confirm this.
You should be good to flash any d2lte or d2att rom.
I recommend not flashing any modem or bootoader from this point forward unless the bootoader and modem are newer than the currently installed botloader and modem. Also, the botloader and modem must be matched to each other.

audit13 said:
If you flashed the latest stock rom, you are running the latest 4.4.2 bootoader and modem.
You can download and run the Samsung phone info app from the play store to confirm this.
You should be good to flash any d2lte or d2att rom.
I recommend not flashing any modem or bootoader from this point forward unless the bootoader and modem are newer than the currently installed botloader and modem. Also, the botloader and modem must be matched to each other.
Click to expand...
Click to collapse
Thank you so much for the help and information. I guess I never realized that the bootloader & modem were installed w/ the stock rom as I always have flashed those separately through Odin when needed. Definitely good information to have and not easy information to find. I have successfully got my custom ROM on there and am now fine-tuning it for the wife.

fodor362 said:
Thank you so much for the help and information. I guess I never realized that the bootloader & modem were installed w/ the stock rom as I always have flashed those separately through Odin when needed. Definitely good information to have and not easy information to find. I have successfully got my custom ROM on there and am now fine-tuning it for the wife.
Click to expand...
Click to collapse
Glad to hear the phone is running well.
I've heard it said "Happy wife, Happy life."